2 Circuit set-up Trilogy100

1 Overview
Before operating Trilogy100, you need to configure the circuit type. Philips Healthcare is part of Philips Respironics
Royal Philips Electronics 1010 Murry Ridge Lane
Murrysville, PA 15668
How to reach us Customer Service
Set-up with exhalation valve Set-up with exhalation port www.philips.com/healthcare 724 387 4000
healthcare@philips.com 800 345 6443 (toll free) Detachable Air inlet and grey
Tracheostomy Mask without Tracheostomy Mask with Mask without fax: +31 40 27 64 887 battery Removable foam filter
tubing integrated leak tubing integrated leak integrated leak Respironics Europe,Africa, Middle East Proximal Primary: S/T AVAPS
cm
H2O 4 air pathway
0 5 10 15 20 25 30

+33 1 47 52 30 00 pressure 24/04/2007

Asia line
04:53 PM

+852 2821 5888 www.philips.com/respironics Exit Navigate Select

Exhalation 5
valve line
Europe, Middle East,Africa
6
+49 7031 463 2254
7
Tee connector Whisper 1 2 3
Exhalation valve Whisper Latin America
Swivel II
Proximal (exhalation Swivel II +55 11 2125 0744
pressure port port) (exhalation
port)

Quick start guide

1 Cancel action or exit menu
Proximal North America
pressure line 2 Navigate menus or change settings External
+1 425 487 7000 Remote Ethernet battery
Exhalation 800 285 5585 (toll free, US only) 3 Select/modify/confirm parameters alarm connector connector
valve line
4 Audio pause button connector
Flexible Oxygen valve port
5 Start/stop button Serial connector – to
tubing
1 Overview
6 AC power inlet
connect to a computer or
(flow source up to
15 LPM)
Alice polysomnographs
Flexible 7 SD card to download ventilation data
tubing
2 Circuit set-up

Symbols and icons

Bacterial/viral filter
(optional) 3 Set-up screen
To change the Respironics,Trilogy,Whisper Swivel, and Alice are trademarks of Respironics, Inc. and its affiliates. Prescriber environment, full access mode Status of detachable battery
porting block Proximal pressure line
Bacterial/viral filter
4 Prescription set-up
SD card inserted in the ventilator Status of internal battery
(optional)
© 2009 Koninklijke Philips Electronics N.V. All rights are reserved.
Audio pause active Status of external battery
Philips Healthcare reserves the right to make changes in specifications and/or to discontinue any
product at any time without notice or obligation and will not be liable for any consequences
Exhalation valve line resulting from the use of this publication.
Ramp active Battery is charging
Geyer WMB 1/19/09 MCI 4102101 PN 1059349
Please check that circuit type is properly configured.
2 Circuit set-up Trilogy100
1 Overview
Before operating Trilogy100, you need to configure the circuit type. Philips Healthcare is part of Philips Respironics
Royal Philips Electronics 1010 Murry Ridge Lane
Murrysville, PA 15668
How to reach us Customer Service
Set-up with exhalation valve Set-up with exhalation port www.philips.com/healthcare 724 387 4000
healthcare@philips.com 800 345 6443 (toll free) Detachable Air inlet and grey
Tracheostomy Mask without Tracheostomy Mask with Mask without fax: +31 40 27 64 887 battery Removable foam filter
tubing integrated leak tubing integrated leak integrated leak Respironics Europe,Africa, Middle East Proximal Primary: S/T AVAPS
cm
H2O 4 air pathway
0 5 10 15 20 25 30

+33 1 47 52 30 00 pressure 24/04/2007

Asia line
04:53 PM

+852 2821 5888 www.philips.com/respironics Exit Navigate Select

Exhalation 5
valve line
Europe, Middle East,Africa
6
+49 7031 463 2254
7
Tee connector Whisper 1 2 3
Exhalation valve Whisper Latin America
Swivel II
Proximal (exhalation Swivel II +55 11 2125 0744
pressure port port) (exhalation
port)

Quick start guide

1 Cancel action or exit menu
Proximal North America
pressure line 2 Navigate menus or change settings External
+1 425 487 7000 Remote Ethernet battery
Exhalation 800 285 5585 (toll free, US only) 3 Select/modify/confirm parameters alarm connector connector
valve line
4 Audio pause button connector
Flexible Oxygen valve port
5 Start/stop button Serial connector – to
tubing
1 Overview
6 AC power inlet
connect to a computer or
(flow source up to
15 LPM)
Alice polysomnographs
Flexible 7 SD card to download ventilation data
tubing
2 Circuit set-up

Symbols and icons

Bacterial/viral filter
(optional) 3 Set-up screen
To change the Respironics,Trilogy,Whisper Swivel, and Alice are trademarks of Respironics, Inc. and its affiliates. Prescriber environment, full access mode Status of detachable battery
porting block Proximal pressure line
Bacterial/viral filter
4 Prescription set-up
SD card inserted in the ventilator Status of internal battery
(optional)
© 2009 Koninklijke Philips Electronics N.V. All rights are reserved.
Audio pause active Status of external battery
Philips Healthcare reserves the right to make changes in specifications and/or to discontinue any
product at any time without notice or obligation and will not be liable for any consequences
Exhalation valve line resulting from the use of this publication.
Ramp active Battery is charging
Geyer WMB 1/19/09 MCI 4102101 PN 1059349
Please check that circuit type is properly configured.
2 Circuit set-up Trilogy100
1 Overview
Before operating Trilogy100, you need to configure the circuit type. Philips Healthcare is part of Philips Respironics
Royal Philips Electronics 1010 Murry Ridge Lane
Murrysville, PA 15668
How to reach us Customer Service
Set-up with exhalation valve Set-up with exhalation port www.philips.com/healthcare 724 387 4000
healthcare@philips.com 800 345 6443 (toll free) Detachable Air inlet and grey
Tracheostomy Mask without Tracheostomy Mask with Mask without fax: +31 40 27 64 887 battery Removable foam filter
tubing integrated leak tubing integrated leak integrated leak Respironics Europe,Africa, Middle East Proximal Primary: S/T AVAPS
cm
H2O 4 air pathway
0 5 10 15 20 25 30

+33 1 47 52 30 00 pressure 24/04/2007

Asia line
04:53 PM

+852 2821 5888 www.philips.com/respironics Exit Navigate Select

Exhalation 5
valve line
Europe, Middle East,Africa
6
+49 7031 463 2254
7
Tee connector Whisper 1 2 3
Exhalation valve Whisper Latin America
Swivel II
Proximal (exhalation Swivel II +55 11 2125 0744
pressure port port) (exhalation
port)

Quick start guide

1 Cancel action or exit menu
Proximal North America
pressure line 2 Navigate menus or change settings External
+1 425 487 7000 Remote Ethernet battery
Exhalation 800 285 5585 (toll free, US only) 3 Select/modify/confirm parameters alarm connector connector
valve line
4 Audio pause button connector
Flexible Oxygen valve port
5 Start/stop button Serial connector – to
tubing
1 Overview
6 AC power inlet
connect to a computer or
(flow source up to
15 LPM)
Alice polysomnographs
Flexible 7 SD card to download ventilation data
tubing
2 Circuit set-up

Symbols and icons

Bacterial/viral filter
(optional) 3 Set-up screen
To change the Respironics,Trilogy,Whisper Swivel, and Alice are trademarks of Respironics, Inc. and its affiliates. Prescriber environment, full access mode Status of detachable battery
porting block Proximal pressure line
Bacterial/viral filter
4 Prescription set-up
SD card inserted in the ventilator Status of internal battery
(optional)
© 2009 Koninklijke Philips Electronics N.V. All rights are reserved.
Audio pause active Status of external battery
Philips Healthcare reserves the right to make changes in specifications and/or to discontinue any
product at any time without notice or obligation and will not be liable for any consequences
Exhalation valve line resulting from the use of this publication.
Ramp active Battery is charging
Geyer WMB 1/19/09 MCI 4102101 PN 1059349
Please check that circuit type is properly configured.
3 Set-up screen 4 Prescription set-up
Setting the Active or Passive circuit Setting menu access

Make sure Trilogy100 is turned off before taking the following steps To enable full access to the settings

A B A B A B C D
Menu 1/10 Mode S/T
Settings And Alarms Settings And Alarms
Settings And Alarms Menu Options 1/18 AVAPS OFF AVAPS OFF
Options Options
Options IPAP 30.0 cmH20
Alarm log Menu Access Limited IPAP 30.0 cmH20
Alarm log Alarm log EPAP 8.0 cmH20
Event log Detailed View OFF EPAP 8.0 cmH20
Event log
Information
Information Language English Exit Navigate Select Finish Navigate Modify Finish Navigate Modify
Exit Navigate Select Finish Navigate Modify Menu
Exit Navigate Select

Press and hold and for a few seconds Select Settings And Alarms Navigate to Options and press Press to enter Menu Access From main screen, press Menu Select Settings And Alarms Scroll up and down using to navigate Press to change the parameter
to access Set-up through the settings and alarms highlighted in blue
page
C D C D E F G
Mode S/T
AVAPS ON AVAPS ON
Menu Settings and Alarms 2/23 Menu Settings and Alarms 2/23 AVAPS ON
Menu Options 1/18 Menu Options 2/18 Tidal Volume 400 ml Tidal Volume 400 ml
Dual Prescription OFF
Tidal Volume 400 ml
Dual Prescription OFF Menu Access Full Menu Access Full IPAP Max Pressure 25.0 cmH20 IPAP Max Pressure 25.0 cmH20
Circuit Type Passive Circuit Type Active PAP IPAP Max Pressure 25.0 cmH20
Detailed View OFF Detailed View OFF
Cancel Edit OK Cancel Edit OK
Mode S/T Mode S/T Language English Language English Finish Navigate Modify
Exit Navigate Modify Cancel Edit OK Cancel Edit OK Finish Navigate Modify

Use to choose Full or Limited Access Press and Use to change the value or status Press to validate new setting Press and
Navigate to CircuitType and press Use to choose Active PAP (exhalation to return to Initial Screen of setting to return to the main screen
and press to confirm
valve set-up) or Passive (exhalation port set-up)
and then press twice to confirm
Dual Prescription
E
RR 20BPM Vte 435ml Peak Flow 67.9l/min
Menu Settings And Alarms 1/20
PIP 5.9cm
HO 2 Leak 21l/min MinVent 8.7l/min
Dual Prescription ON
Mode S/T Menu 3/8

Press to begin therapy or AVAPS ON Switch to Secondary Settings

Tidal Volume 400 ml Safely Remove SD Card
continue navigating through the menu IPAP Max Pressure 25.0 cmH20 Primary Settings and Alarms

to set-up the ventilation parameters Finish Navigate Modify Secondary Settings and Alarms
Options

Exit Navigate Select

If Dual Prescription is enabled, both prescriptions Two prescriptions to set

need to be adjusted as previously explained
3 Set-up screen 4 Prescription set-up
Setting the Active or Passive circuit Setting menu access

Make sure Trilogy100 is turned off before taking the following steps To enable full access to the settings

A B A B A B C D
Menu 1/10 Mode S/T
Settings And Alarms Settings And Alarms
Settings And Alarms Menu Options 1/18 AVAPS OFF AVAPS OFF
Options Options
Options IPAP 30.0 cmH20
Alarm log Menu Access Limited IPAP 30.0 cmH20
Alarm log Alarm log EPAP 8.0 cmH20
Event log Detailed View OFF EPAP 8.0 cmH20
Event log
Information
Information Language English Exit Navigate Select Finish Navigate Modify Finish Navigate Modify
Exit Navigate Select Finish Navigate Modify Menu
Exit Navigate Select

Press and hold and for a few seconds Select Settings And Alarms Navigate to Options and press Press to enter Menu Access From main screen, press Menu Select Settings And Alarms Scroll up and down using to navigate Press to change the parameter
to access Set-up through the settings and alarms highlighted in blue
page
C D C D E F G
Mode S/T
AVAPS ON AVAPS ON
Menu Settings and Alarms 2/23 Menu Settings and Alarms 2/23 AVAPS ON
Menu Options 1/18 Menu Options 2/18 Tidal Volume 400 ml Tidal Volume 400 ml
Dual Prescription OFF
Tidal Volume 400 ml
Dual Prescription OFF Menu Access Full Menu Access Full IPAP Max Pressure 25.0 cmH20 IPAP Max Pressure 25.0 cmH20
Circuit Type Passive Circuit Type Active PAP IPAP Max Pressure 25.0 cmH20
Detailed View OFF Detailed View OFF
Cancel Edit OK Cancel Edit OK
Mode S/T Mode S/T Language English Language English Finish Navigate Modify
Exit Navigate Modify Cancel Edit OK Cancel Edit OK Finish Navigate Modify

Use to choose Full or Limited Access Press and Use to change the value or status Press to validate new setting Press and
Navigate to CircuitType and press Use to choose Active PAP (exhalation to return to Initial Screen of setting to return to the main screen
and press to confirm
valve set-up) or Passive (exhalation port set-up)
and then press twice to confirm
Dual Prescription
E
RR 20BPM Vte 435ml Peak Flow 67.9l/min
Menu Settings And Alarms 1/20
PIP 5.9cm
HO 2 Leak 21l/min MinVent 8.7l/min
Dual Prescription ON
Mode S/T Menu 3/8

Press to begin therapy or AVAPS ON Switch to Secondary Settings

Tidal Volume 400 ml Safely Remove SD Card
continue navigating through the menu IPAP Max Pressure 25.0 cmH20 Primary Settings and Alarms

to set-up the ventilation parameters Finish Navigate Modify Secondary Settings and Alarms
Options

Exit Navigate Select

If Dual Prescription is enabled, both prescriptions Two prescriptions to set

need to be adjusted as previously explained
3 Set-up screen 4 Prescription set-up
Setting the Active or Passive circuit Setting menu access

Make sure Trilogy100 is turned off before taking the following steps To enable full access to the settings

A B A B A B C D
Menu 1/10 Mode S/T
Settings And Alarms Settings And Alarms
Settings And Alarms Menu Options 1/18 AVAPS OFF AVAPS OFF
Options Options
Options IPAP 30.0 cmH20
Alarm log Menu Access Limited IPAP 30.0 cmH20
Alarm log Alarm log EPAP 8.0 cmH20
Event log Detailed View OFF EPAP 8.0 cmH20
Event log
Information
Information Language English Exit Navigate Select Finish Navigate Modify Finish Navigate Modify
Exit Navigate Select Finish Navigate Modify Menu
Exit Navigate Select

Press and hold and for a few seconds Select Settings And Alarms Navigate to Options and press Press to enter Menu Access From main screen, press Menu Select Settings And Alarms Scroll up and down using to navigate Press to change the parameter
to access Set-up through the settings and alarms highlighted in blue
page
C D C D E F G
Mode S/T
AVAPS ON AVAPS ON
Menu Settings and Alarms 2/23 Menu Settings and Alarms 2/23 AVAPS ON
Menu Options 1/18 Menu Options 2/18 Tidal Volume 400 ml Tidal Volume 400 ml
Dual Prescription OFF
Tidal Volume 400 ml
Dual Prescription OFF Menu Access Full Menu Access Full IPAP Max Pressure 25.0 cmH20 IPAP Max Pressure 25.0 cmH20
Circuit Type Passive Circuit Type Active PAP IPAP Max Pressure 25.0 cmH20
Detailed View OFF Detailed View OFF
Cancel Edit OK Cancel Edit OK
Mode S/T Mode S/T Language English Language English Finish Navigate Modify
Exit Navigate Modify Cancel Edit OK Cancel Edit OK Finish Navigate Modify

Use to choose Full or Limited Access Press and Use to change the value or status Press to validate new setting Press and
Navigate to CircuitType and press Use to choose Active PAP (exhalation to return to Initial Screen of setting to return to the main screen
and press to confirm
valve set-up) or Passive (exhalation port set-up)
and then press twice to confirm
Dual Prescription
E
RR 20BPM Vte 435ml Peak Flow 67.9l/min
Menu Settings And Alarms 1/20
PIP 5.9cm
HO 2 Leak 21l/min MinVent 8.7l/min
Dual Prescription ON
Mode S/T Menu 3/8

Press to begin therapy or AVAPS ON Switch to Secondary Settings

Tidal Volume 400 ml Safely Remove SD Card
continue navigating through the menu IPAP Max Pressure 25.0 cmH20 Primary Settings and Alarms

to set-up the ventilation parameters Finish Navigate Modify Secondary Settings and Alarms
Options

Exit Navigate Select

If Dual Prescription is enabled, both prescriptions Two prescriptions to set

need to be adjusted as previously explained
3 Set-up screen 4 Prescription set-up
Setting the Active or Passive circuit Setting menu access

Make sure Trilogy100 is turned off before taking the following steps To enable full access to the settings

A B A B A B C D
Menu 1/10 Mode S/T
Settings And Alarms Settings And Alarms
Settings And Alarms Menu Options 1/18 AVAPS OFF AVAPS OFF
Options Options
Options IPAP 30.0 cmH20
Alarm log Menu Access Limited IPAP 30.0 cmH20
Alarm log Alarm log EPAP 8.0 cmH20
Event log Detailed View OFF EPAP 8.0 cmH20
Event log
Information
Information Language English Exit Navigate Select Finish Navigate Modify Finish Navigate Modify
Exit Navigate Select Finish Navigate Modify Menu
Exit Navigate Select

Press and hold and for a few seconds Select Settings And Alarms Navigate to Options and press Press to enter Menu Access From main screen, press Menu Select Settings And Alarms Scroll up and down using to navigate Press to change the parameter
to access Set-up through the settings and alarms highlighted in blue
page
C D C D E F G
Mode S/T
AVAPS ON AVAPS ON
Menu Settings and Alarms 2/23 Menu Settings and Alarms 2/23 AVAPS ON
Menu Options 1/18 Menu Options 2/18 Tidal Volume 400 ml Tidal Volume 400 ml
Dual Prescription OFF
Tidal Volume 400 ml
Dual Prescription OFF Menu Access Full Menu Access Full IPAP Max Pressure 25.0 cmH20 IPAP Max Pressure 25.0 cmH20
Circuit Type Passive Circuit Type Active PAP IPAP Max Pressure 25.0 cmH20
Detailed View OFF Detailed View OFF
Cancel Edit OK Cancel Edit OK
Mode S/T Mode S/T Language English Language English Finish Navigate Modify
Exit Navigate Modify Cancel Edit OK Cancel Edit OK Finish Navigate Modify

Use to choose Full or Limited Access Press and Use to change the value or status Press to validate new setting Press and
Navigate to CircuitType and press Use to choose Active PAP (exhalation to return to Initial Screen of setting to return to the main screen
and press to confirm
valve set-up) or Passive (exhalation port set-up)
and then press twice to confirm
Dual Prescription
E
RR 20BPM Vte 435ml Peak Flow 67.9l/min
Menu Settings And Alarms 1/20
PIP 5.9cm
HO 2 Leak 21l/min MinVent 8.7l/min
Dual Prescription ON
Mode S/T Menu 3/8

Press to begin therapy or AVAPS ON Switch to Secondary Settings

Tidal Volume 400 ml Safely Remove SD Card
continue navigating through the menu IPAP Max Pressure 25.0 cmH20 Primary Settings and Alarms

to set-up the ventilation parameters Finish Navigate Modify Secondary Settings and Alarms
Options

Exit Navigate Select

If Dual Prescription is enabled, both prescriptions Two prescriptions to set

need to be adjusted as previously explained
2 Circuit set-up Trilogy100
1 Overview
Before operating Trilogy100, you need to configure the circuit type. Philips Healthcare is part of Philips Respironics
Royal Philips Electronics 1010 Murry Ridge Lane
Murrysville, PA 15668
How to reach us Customer Service
Set-up with exhalation valve Set-up with exhalation port www.philips.com/healthcare 724 387 4000
healthcare@philips.com 800 345 6443 (toll free) Detachable Air inlet and grey
Tracheostomy Mask without Tracheostomy Mask with Mask without fax: +31 40 27 64 887 battery Removable foam filter
tubing integrated leak tubing integrated leak integrated leak Respironics Europe,Africa, Middle East Proximal Primary: S/T AVAPS
cm
H2O 4 air pathway
0 5 10 15 20 25 30

+33 1 47 52 30 00 pressure 24/04/2007

Asia line
04:53 PM

+852 2821 5888 www.philips.com/respironics Exit Navigate Select

Exhalation 5
valve line
Europe, Middle East,Africa
6
+49 7031 463 2254
7
Tee connector Whisper 1 2 3
Exhalation valve Whisper Latin America
Swivel II
Proximal (exhalation Swivel II +55 11 2125 0744
pressure port port) (exhalation
port)

Quick start guide

1 Cancel action or exit menu
Proximal North America
pressure line 2 Navigate menus or change settings External
+1 425 487 7000 Remote Ethernet battery
Exhalation 800 285 5585 (toll free, US only) 3 Select/modify/confirm parameters alarm connector connector
valve line
4 Audio pause button connector
Flexible Oxygen valve port
5 Start/stop button Serial connector – to
tubing
1 Overview
6 AC power inlet
connect to a computer or
(flow source up to
15 LPM)
Alice polysomnographs
Flexible 7 SD card to download ventilation data
tubing
2 Circuit set-up

Symbols and icons

Bacterial/viral filter
(optional) 3 Set-up screen
To change the Respironics,Trilogy,Whisper Swivel, and Alice are trademarks of Respironics, Inc. and its affiliates. Prescriber environment, full access mode Status of detachable battery
porting block Proximal pressure line
Bacterial/viral filter
4 Prescription set-up
SD card inserted in the ventilator Status of internal battery
(optional)
© 2009 Koninklijke Philips Electronics N.V. All rights are reserved.
Audio pause active Status of external battery
Philips Healthcare reserves the right to make changes in specifications and/or to discontinue any
product at any time without notice or obligation and will not be liable for any consequences
Exhalation valve line resulting from the use of this publication.
Ramp active Battery is charging
Geyer WMB 1/19/09 MCI 4102101 PN 1059349
Please check that circuit type is properly configured.