Trilogy100
Proximal pressure line Exhalation valve line
Quick start guide
1 2 3 4
Overview Circuit set-up Set-up screen Prescription set-up
Overview
Detachable Removable battery air pathway 4 Air inlet and grey foam filter
Primary: S/T AVAPS cm H2O 0 5 10 15 20 25 30
24/04/2007
04:53 PM
Exit
Navigate
Select
5 6 7 1 2 3
1 2 3 4 5 6 7
Cancel action or exit menu Navigate menus or change settings Select/modify/confirm parameters Audio pause button Start/stop button AC power inlet SD card to download ventilation data
External Ethernet battery Remote connector connector alarm connector Oxygen valve port Serial connector to (flow source up to connect to a computer or 15 LPM) Alice polysomnographs
Symbols and icons
Prescriber environment, full access mode SD card inserted in the ventilator Audio pause active Ramp active Status of detachable battery Status of internal battery Status of external battery Battery is charging
Circuit set-up
Before operating Trilogy100, you need to configure the circuit type. Set-up with exhalation port
Tracheostomy Mask with tubing integrated leak Mask without integrated leak
Set-up with exhalation valve
Tracheostomy tubing Mask without integrated leak
Tee connector Proximal pressure port Proximal pressure line
Exhalation valve
Whisper Swivel II (exhalation port)
Whisper Swivel II (exhalation port)
Exhalation valve line Flexible tubing
Flexible tubing
Bacterial/viral filter (optional)
To change the porting block
Proximal pressure line
Bacterial/viral filter (optional)
Exhalation valve line
Please check that circuit type is properly configured.
3
A
Set-up screen
B
Menu Settings And Alarms Options Alarm log Event log Information 1/10
Setting the Active or Passive circuit Make sure Trilogy100 is turned off before taking the following steps
Exit
Navigate
Select
Press and hold page
and
for a few seconds to access Set-up
Select Settings And Alarms
C
Menu Settings and Alarms OFF Passive S/T 2/23 Dual Prescription Circuit Type Mode
D
Menu Settings and Alarms OFF Active PAP S/T 2/23 Dual Prescription Circuit Type Mode
Exit
Navigate
Modify
Cancel
Edit
OK
Navigate to CircuitType and press
Use to choose Active PAP (exhalation valve set-up) or Passive (exhalation port set-up) and then press twice to confirm
Setting menu access To enable full access to the settings
A
Settings And Alarms Options Alarm log Event log Information
B
Menu Options Limited OFF English 1/18 Menu Access Detailed View Language
Exit
Navigate
Select
Finish
Navigate
Modify
Navigate to Options and press
Press
to enter Menu Access
C
Menu Options Full OFF English 1/18 Menu Access Detailed View Language
D
Menu Options Full OFF English 2/18 Menu Access Detailed View Language
Cancel
Edit
OK
Finish
Navigate
Modify
Use to choose Full or Limited Access and press to confirm
Press and to return to Initial Screen
E
Press to begin therapy or continue navigating through the menu to set-up the ventilation parameters
4
A
Prescription set-up
B
Settings And Alarms Options Alarm log
Menu
Exit
Navigate
Select
From main screen, press Menu
Select Settings And Alarms
E
AVAPS Tidal Volume IPAP Max Pressure ON 400 ml 25.0 cmH20
F
AVAPS Tidal Volume IPAP Max Pressure ON 400 ml 25.0 cmH20
Cancel
Edit
OK
Cancel
Edit
OK
Use to change the value or status of setting
Press
to validate new setting
Dual Prescription
RR
Menu
Settings And Alarms ON S/T ON 400 ml 25.0 cmH20
1/20
PIP
Dual Prescription Mode AVAPS Tidal Volume IPAP Max Pressure
20BPM 5.9cmO H
2
Vte Leak
435ml 21l/min
Peak Flow MinVent
67.9l/min 8.7l/min
3/8
Menu Switch to Secondary Settings Safely Remove SD Card Primary Settings and Alarms Secondary Settings and Alarms Options
Finish
Navigate
Modify
Exit
Navigate
Select
If Dual Prescription is enabled, both prescriptions need to be adjusted as previously explained
Two prescriptions to set
C
AVAPS IPAP EPAP OFF 30.0 cmH20 8.0 cmH20
D
Mode AVAPS IPAP EPAP S/T OFF 30.0 cmH20 8.0 cmH20
Finish
Navigate
Modify
Finish
Navigate
Modify
Scroll up and down using to navigate through the settings and alarms
Press highlighted in blue
to change the parameter
G
Mode AVAPS Tidal Volume IPAP Max Pressure S/T ON 400 ml 25.0 cmH20
Finish
Navigate
Modify
Press and to return to the main screen
Philips Healthcare is part of Royal Philips Electronics How to reach us www.philips.com/healthcare healthcare@philips.com fax: +31 40 27 64 887 Asia +852 2821 5888 Europe, Middle East,Africa +49 7031 463 2254 Latin America +55 11 2125 0744 North America +1 425 487 7000 800 285 5585 (toll free, US only)
Philips Respironics 1010 Murry Ridge Lane Murrysville, PA 15668 Customer Service 724 387 4000 800 345 6443 (toll free) Respironics Europe,Africa, Middle East +33 1 47 52 30 00 www.philips.com/respironics
Respironics,Trilogy,Whisper Swivel, and Alice are trademarks of Respironics, Inc. and its affiliates.
2009 Koninklijke Philips Electronics N.V. All rights are reserved. Philips Healthcare reserves the right to make changes in specifications and/or to discontinue any product at any time without notice or obligation and will not be liable for any consequences resulting from the use of this publication. Geyer WMB 1/19/09 MCI 4102101 PN 1059349
