ELECTRICAL WORK
GECMAL SDN BHD
JOB HAZARD ANALYSIS
ACTIVITY HAZARDS CONTROL MEASURES
1.Mobilize Slips, trips and Clean, neat work area, plan out
equipment to falls lifting/moving of items
jobsite
Strains
Lift with knees, not back, utilize lift gate to
load out job-boxes and other heavy items
Ladder onto loading dock
Proper ladder usage, three points of contact,
correct ladder type, ladder to be used and
Cuts/scrapes inspected daily before use.
Employees to wear gloves when handling
materials
2.Repair or Slips, trips and Clean, neat work area, plan out
replace existing falls lifting/moving of items
Louver. Employees to wear gloves when
Cuts/scrapes handling materials
Ladder Proper ladder usage, three points of
contact, correct ladder type, ladder to be
used and inspected daily before use.
Electrical Panel to be LOTO. All employees to
verify zero energy
1|Page
ELECTRICAL WORK
ACTIVITY HAZARDS CONTROL MEASURES
3.Install New 11kv Slips and falls Clean, neat work area, plan out
switchgear lifting/moving of items
C
uts/scrapes
Employees to wear proper suitable PPE
when handling work and materials
Electric shock.
All Ensure that no open wires and
Twisting of drill splicing joints on extension cords.
machine that
might cause Socket outlets shall be weather proof
injury industrial type and approved as per
project requirement provided with
grounding terminals.
Equipment shall be properly grounded
and fire extinguishers are in place.
E
lectrical
Use of ladders must be approved by
safety personal, portable ladders where
L possible instead.
adder
Panel to be LOTO. All employees to
verify zero energy
Proper ladder usage, three points of
contact, correct ladder type, ladder to be
used and inspected daily before use.
2|Page
ELECTRICAL WORK
ACTIVITY HAZARDS CONTROL MEASURES
4. Cable Tray & Slips and falls Clean, neat work area, plan out
Support lifting/moving of items
installation.
Electrical Panel to be LOTO. All employees to
verify zero energy
C Proper tools and equipment shall be used
uts and when installing cable tray & supports.
Laceration. Inspected and in good working condition.
Muscle
Strain/Sprain. Proper body mechanics while manual
lifting cable tray, body should be straight
& knees bent. Use two persons on lifting.
Ladder
Personal Protective Equipment (gloves
and goggle) must be worn while work is
in progress.
Proper ladder usage, three points of
contact, correct ladder type, ladder to be
used and inspected daily before use.
5. Drilling works E Ensure that no open wires and splicing
lectric shock. joints on extension cords.
Twisting of drill
machine that Equipment shall be inspected and color
might cause coded.
injury.
Socket outlets shall be weather proof
industrial type and approved as per
project requirement provided with
grounding terminals.
Drill machine shall be in good running
condition.
Used appropriate PPE; Leather gloves.
Drill machine must be provided with
guide stopper, properly positioned and
grip.
3|Page
ELECTRICAL WORK
ACTIVITY HAZARDS CONTROL MEASURES
6. Welding works Fire Hazard. If welding works are done in a classified
area near existing plant (Q-Chem I) or
Hot Work permit. within existing plant approved fire box
must be provided.
Fire watch
required.
Equipment shall be properly grounded
and fire extinguishers are in place.
Eye injury.
Compressed Gas Cylinders must be kept
far enough away from welding so that
sparks and hot slag will not reach the
cylinder.
Wear approved welding mask.
7.Unauthorized Danger from Proper barricade shall be executed so as
personnel entering falling objects to prevent entry of unauthorized
worksite. personnel entering worksite.
Wearing of Personnel Protective
Equipment shall be used at all times.
The area of barricade shall cover the
entire working area.
Safety warning signs shall be visible and
clear at work area.
4|Page
ELECTRICAL WORK
ACTIVITY HAZARDS CONTROL MEASURES
8.Use of working Danger from Scaffolding shall be inspected by trained
platform. falling, and certified scaffolding inspector and
green tagged.
Materials kept on platform should be as
per the load bearing capacity of the
platform.
Only trained personnel or workers are
allowed to work on a high level or
elevation platform.
Full body harness shall be worn at all
times while working on platform.
Lanyards must be properly hooked (100%
tie off).
No tools shall be carried by hands while
climbing on a working platform.
No stepping on handrails.
Good housekeeping shall be maintained
above working platform.
9.Housekeeping Slip and fall To remove all unused material from work
site and dispose it at designated area
Tripping
To standby 3R waste bin at site office
area
Employees to wear proper suitable PPE
when handling work and materials
5|Page
