Prime 2 9 2 e K W 3 6 5 K V A 50 HZ 1500 RPM 415 Volts: Diesel Generator Set
Prime 2 9 2 e K W 3 6 5 K V A 50 HZ 1500 RPM 415 Volts: Diesel Generator Set
PRIME
292 ekW 365 kVA
50 Hz 1500 rpm 415 Volts
Caterpillar is leading the power generation
marketplace with Power Solutions engineered
to deliver unmatched flexibility, expandability,
reliability, and cost-effectiveness.
Image shown may not
reflect actual package.
FEATURES
COMPLETE, READY-TO-RUN SYSTEM CAT® 3406C TA DIESEL ENGINE
• Fully configured generator set
• Full range of attachments and options available • High efficiency, four-stroke-cycle engine designed
for thousands of trouble-free hours of operation
ENCLOSURES (Optional) • Field-proven in thousands of applications
• Weather protective • UL 2200 Listed packages are available. Certain
restrictions may apply. Consult with your
ENCLOSURES (optional) Caterpillar dealer
• Weather protective and sound attenuated
CAT SR4B GENERATOR
SINGLE-SOURCE SUPPLIER
• Fully prototype tested with certified torsional • Matched to the performance and output
vibration analysis available characteristics of Caterpillar engines
• Optimum winding pitch for minimum total
SINGLE-SOURCE SUPPLIER harmonic distortion and maximum efficiency
• Factory-designed systems built at Caterpillar ISO • Segregated low voltage, AC/DC accessory box
9001:2000 certified facilities provides single point access to accessory
• Fully prototype tested with certified torsional connections
vibration analysis available • UL 1446 Recognized Class H insulation
Caterpillar Generator
SPECIFICATIONS
• EMCP II
• 24 Volt DC Control
• NEMA 1, IP22 enclosure
• Electronically dead front
• Lockable hinged door
• Generator instruments meet ANSI C-39-1
• Terminal box mounted
• Single location customer connection point
• EU compliant - segregated AC/DC connections
• Panel illuminating lights
• Auto start/stop control
• Voltage adjust potentiometer
• True RMS AC metering
• Digital indications for:
- RPM
- Operating hours
- Oil pressure
- Coolant temperature
- System DC volts
- AC volts, phase amps, Hz
• Shutdowns with indicating lights for:
- Low oil pressure
- High coolant temperature
- Overspeed
- Emergency stop
- Failure to start (overcrank)
TECHNICAL DATA
Meets or Exceeds International Specifications: ABGSM Ratings are based on SAE J1995 standard conditions.
TM3, AS1359, AS2789, BS4999, BS5000, BS5514, These ratings also apply at ISO3046/1, DIN6271, and
DIN6271, DIN6280, EGSA101P, IEC34/1, ISO3046/1, BS5514 standard conditions.
ISO8528, JEM1359, NEMA MG 1-22, VDE0530, Fuel Rates are based on fuel oil of 35º API (16º C or 60º F)
89/392/EEC, 89/336/EEC gravity having an LHV of 42 780 kJ/kg (18,390 Btu/lb)
Prime - Output available with varying load for an when used at 29º C (85º F) and weighing 838.9 g/liter
unlimited time. Prime power in accordance with ISO8528. (7.001 lbs/U.S. gal.).
10% overload power in accordance with ISO3046/1, Additional Ratings may be available for specific
AS2789, DIN6271, and BS5514 available on request. customer requirements. Consult your Caterpillar
Prime power ambients shown indicate ambient at 100 representative for details.
percent load which results in a coolant top tank
temperature just below the alarm temperature.
DIMENSIONS
Package Dimensions
Note: Do not use for installation design.
Length 4182.0 mm 164.65 in See general dimension drawings for
Width 1107.4 mm 43.6 in detail (Drawing #2433754).
Height 2150.3 mm 84.66 in
Weight 3321 kg 7,322 lb