TECHNICAL BROCHURE
B4SD R1
4SD
SUBMERSIBLE SEWAGE PUMP
DUAL SEAL WITH SEAL SENSOR PROBE
Goulds Water Technology
Wastewater
FEATURES
Impeller: Cast iron, two vane semi-open, non-clog Seal Sensor Probe: Located in oil-filled chamber.
with pump-out vanes for mechanical seal protection. If pumpage should begin to leak past lower seal it
Balanced for smooth operation. Silicon bronze indicates to pump control panel a fault has occurred.
impeller available as an option. Requires optional Seal Fail Circuit in the control panel.
Casing: Heavy duty cast iron, volute type for maximum Shaft: 300 series stainless steel keyed design.
efficiency. 4" flange conforms to 125 # ANSI standard.
Fasteners: 300 series stainless steel.
Connects to A10-40 or A10-60 guide rail system.
Capable of running dry without damage to
Dual Mechanical Seals: Silicon carbide vs. silicon
components.
carbide outer seal and ceramic vs. carbon inner seal,
stainless steel metal parts, BUNA-N elastomers. Upper AGENCY LISTINGS
and lower shaft seals are positioned independently Tested to UL 778 and CSA 22.2 108 Standards
and are separated by an oil-filled chamber. ® By Canadian Standards Association
C US File #LR38549
APPLICATIONS Single Phase:
Used in a variety of residential, commercial and • 1.5 - 5 HP
industrial applications such as: • 208 and 230 volts
• Sewage systems • Built-in thermal overloads with automatic reset
• Flood and pollution control • Built-in capacitors
• Dewatering/Effluent Three Phase:
• Farms • 1.5 - 7.5 HP
• Hospitals • 200, 230, 460 and 575 volts
• Trailer courts • Class 10 overload protection must be provided in
• Motels control panel
SPECIFICATIONS MOTORS
Pump: • Fully submerged in oil-filled chamber. High grade
• Maximum solid size: 3” turbine oil surrounds motor for more efficient heat
• Discharge size: 4”, 125 # ANSI flange dissipation, permanent lubrication of bearings and
mechanical seal for complete protection against
• Maximum capacity: 620 GPM
outside environment.
• Maximum total head: 60 feet
• Class F insulation
• 300 Series stainess steel fasteners
• 20’ Power cord • Designed for Continuous Operation: Pump ratings
are within the motor manufacturer’s recommended
• Standard silicon carbide/silicon carbide outer seal
working limits and can be operated continuously
Motor: without damage when fully submerged.
• Maximum ambient temperature: 104º F (40º C) • Bearings: Upper and lower heavy duty ball bearing
continuous duty, 140º F (60º C) intermittent duty construction for precision positioning of parts and
• Rated for continuous duty when fully submerged to carry thrust loads.
• Insulation: Class F • Power and Control Cables: Severe duty rated,
• 60 Hertz oil and water resistant. Epoxy seal on motor end
• Single row ball bearings provides secondary moisture barrier in case of outer
jacket damage and to prevent oil wicking. 20 foot
• 300 Series stainless steel keyed shaft
standard with optional lengths available.
• O-ring: Assures positive sealing against
contaminants and oil leakage.
PAGE 2
Goulds Water Technology
Wastewater
MODEL AND MOTOR INFORMATION
Impeller Locked Resistance
Order Maximum KVA Power F.L. Motor Weight
HP Phase Volts RPM Rotor
Number Dia. (In.) Code Amps Code Cable Efficiency % Start Line-Line (lbs.)
Amps
4SD52F8EA 208 17.2 50.8 B 80 1.1 0.9
1 14/3
4SD52F1EA 230 14.7 29.5 E 70 1.4 1.8
4SD52F2EA 200 11.5 40.9 H 81 1.7
1.5 5.63 E 195
4SD52F3EA 230 10.0 40.0 F 83 2.3
3 14/4 NA
4SD52F4EA 460 5.0 20.0 F 83 9.3
4SD52F5EA 575 4.0 14.4 H 74 14.8
4SD52F8DA 208 17.2 50.8 B 80 1.1 0.9
1 14/3
4SD52F1DA 230 14.7 29.5 E 70 1.4 1.8
4SD52F2DA 200 11.5 40.9 H 81 1.7
1.5 6.25 D 195
4SD52F3DA 230 10.0 40.0 F 83 2.3
3 14/4 NA
4SD52F4DA 460 5.0 20.0 F 83 9.3
4SD52F5DA 575 4.0 14.4 H 74 14.8
4SD52G8CA 208 20.3 50.8 B 80 1.1 0.9
1 14/3
4SD52G1CA 230 17.3 36.9 D 75 1.4 1.5
4SD52G2CA 200 13.3 40.9 H 81 1.7
2 6.63 C 200
4SD52G3CA 230 11.6 40.0 F 83 2.3
3 1750 14/4 NA
4SD52G4CA 460 5.8 20.0 F 83 9.3
4SD52G5CA 575 4.6 14.4 H 74 14.8
4SD52H8BA 208 25.5 50.8 B 80 1.1 0.9
1 10/3 208
4SD52H1BA 230 21.5 46.4 C 79 1.0 1.0
4SD52H2BA 200 16.6 53.8 G 10/4 85 1.3
3 7.00 B
4SD52H3BA 230 14.4 49.5 H 83 1.9
3 NA 205
4SD52H4BA 460 7.2 24.8 H 14/4 83 7.5
4SD52H5BA 575 5.8 17.3 G 78 11.6
4SD52J1AA 1 230 26.5 57.7 A 10/3 80 1.0 0.8 213
4SD52J2AA 200 19.1 73.9 F 84 0.9
10/4
4SD52J3AA 5 230 7.25 A 16.6 63.6 E 85 1.2
3 NA 210
4SD52J4AA 460 8.3 31.8 E 85 4.8
14/4
4SD52J5AA 575 6.6 22.8 E 80 7.4
4SD52K3FA 230 23.0 105.0 G 83 0.7
4SD52K4FA 7.5 3 460 7.69 F 11.5 52.5 G 10/4 83 NA 2.8 225
4SD52K5FA 575 9.2 42.0 E 84 4.4
NOMENCLATURE DESCRIPTION
1st, 2nd and 3rd Character – Discharge Size and Type 2 = three phase, 200 V* 5 = three phase, 575 V
4SD = 4" discharge, 3" solids handling, dual seal with 3 = three phase, 230 V 8 = single phase, 208 V
seal fail probe in pump. * Not available on 71⁄2 HP.
4th Character – Mechanical Seals 8th Character – Impeller Diameter
5 = Silicon carbide/silicon carbide/BUNA – lower seal A = 7.25", 5 HP D = 6.25", 11⁄2 HP
and carbon/ceramic/BUNA – upper seal (standard) B = 7.00", 3 HP E = 5.63", 11⁄2 HP
3 = Silicon carbide/tungsten carbide/BUNA – lower C = 6.63", 2 HP F = 7.69", 71⁄2 HP
seal and carbon/ceramic/BUNA – upper seal (op- 9th Character – Cord Length (Power and Sensor)
tional) A = 20' (standard) F = 50'
5th Character – Cycle/RPM D = 30' J = 100'
2 = 60 Hz/1750 RPM 6 = 50 Hz/1450 RPM 10th Character – Options
6th Character – Horsepower B = Bronze impeller
F = 1½ HP H = 3 HP K = 7½ HP E = Epoxy paint
G = 2 HP J = 5 HP F = Both epoxy paint and bronze impeller
7th Character – Phase/Voltage 11th Character – Option
1 = single phase, 230 V 4 = three phase, 460 V H = Pilot duty thermal sensors (3 phase only!!)
PAGE 3
APPLICATION DATA DIMENSIONS
Maximum Solid Size 3" (All dimensions are in inches. Do not use for construction purposes.)
Minimum Casing Thickness ⁄16"
5
Casing Corrosion Allowance ⁄8"
1
ROTATION
Maximum Working Pressure 30 PSI
Maximum Submergence 50 feet
Fully submerged for continuous operation 12.62"
28.25" 4" 125 #
Minimum Submergence 6" below top of motor for intermittent
operation ANSI FLANGE
Maximum Environmental 40ºC (104ºF) continuous operation 9.50"
Temperature 60ºC (140ºF) intermittent operation 6.75" 15.75"
KICKBACK
CONSTRUCTION DETAILS 3.50"
14/3, type SJTOW: single phase, 1⁄2 and 2 HP
14/4, type STOW: single phase, 1½ - 3 HP and 5 MATERIALS OF CONSTRUCTION
Power Cable – Type HP, 460 V
10/4, type STOW: single phase, 3 and 5 HP, three Item Material
phase 5 HP, 230 V and 7½ HP No. Part Name Standard Optional
16/2, type SJTOW: seal sensor only 1 Impeller, non-clog 1003 1179
Sensor Cable – Type 2 Castings 1003
18/4, type SJTOW: seal/heat sensor
Motor Cover Gray Cast Iron – ASTM A48 Class 30 3 Shaft-Keyed 300 Series SS
Bearing Housing Gray Cast Iron – ASTM A48 Class 30 4 Fasteners 300 Series SS
Seal Housing Gray Cast Iron – ASTM A48 Class 30 5 Ball bearings Steel
Casing Gray Cast Iron – ASTM A48 Class 30 Power cable Additional
6 STOW, 20 feet
Gray Cast Iron – ASTM A48 or Cast Bronze – ASTM Seal sensor cable lengths
Impeller
B584 C87600 7 O-ring BUNA-N
Motor Shaft AISI 300 Series Stainless Steel Outer
Motor Design NEMA 56 Frame, oil filled with Class F Insulation Mech. Service Rotary Stationary Elasto- Metal
mers Parts
Seal
Single Phase: on winding thermal overload
8
protection OPT Heavy Silicon Tungsten BUNA-N 300
Motor Overload Protection duty Carbide Carbide Series SS
Three Phase: require ambient compensated Class
STD Mild Silicon Carbide 300
10, quick trip overloads in the control panel. BUNA-N
abrasives Series SS
Motor Seal Fail (Moisture) Seal fail sensor in an oil-filled seal chamber.
Material Code Engineering Standard
Detection Connect to an optional relay in control panel.
1003 Cast iron — ASTM A48 Class 30
Normally closed on-winding thermostats open
Optional Motor Thermal 1179 Silicon bronze — ASTM C87600
at 275º F (135 ºC) and close at 112º F (78º C).
Protection
Require terminal connection in the control panel.
External Hardware 300 Series Stainless Steel 6 6
Impeller Type Semi-open with pump out vanes on back shroud
Oil Capacity – Seal Chamber 1.75 quarts 22
Oil Capacity – Motor 1½-5 HP single and three phase: 7 quarts 44 5 5
Chamber 7½ HP three phase: 6.5 quarts
33 7 7
22 2
STANDARD PARTS
2
88
11⁄2 – 5 HP single and three phase: single row ball– SKF™ 6204-2Z 11
Upper
71⁄2 HP three phase: single row ball – SKF™ 6204-2Z
Ball Bearing
11⁄2 – 5 HP single and three phase: single row ball – SKF™ 5206-2Z 22
Lower
71⁄2 HP three phase: double row ball – SKF™ 5206-2Z
Upper Carbon/Ceramic; Type 21
Mechanical Seals – Standard
Lower Silicon Carbon/Silicon Carbon; Type 31
Mechanical Seals – Optional Lower Silicon Carbide/Tungsten Carbide: Type 21
O-Ring – Stuffing Box BUNA-N, AS 568A-265
O-Ring – Motor Cover BUNA-N, AS 568A-374
Xylem Inc.
2881 East Bayard Street Ext., Suite A
Seneca Falls, NY 13148
Phone: (866) 325-4210
Fax: (888) 322-5877
www.gouldswatertechnology.com
Goulds is a registered trademark of Goulds Pumps, Inc. and is used under license.
© 2014 Xylem Inc. B4SD R1 November 2014
