Copyright Shell Group of Companies. No reproduction or networking permitted without license from Shell.

Not for res

DEP 31.38.01.12-Gen Class 11175, rev. I Page 1 of 14

CLASS 11175

This document has been supplied under license by Shell to: Metric units
UOP Honeywell ted.fuger@honeywell.com 24/01/2018 01:48:18
 DEP 31.38.01.12-Gen Class 11175, rev. I Page 2 of 14

Design limits Branch connections 90 degrees

Temperature (°C) Branch Size

-50 0 50 100 150 200 250 300 340 345 Run 15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600 750 900 1050 1200
Pressure (Barg) size
DN 15-1200 18.4 18.4 18.2 17.4 15.8 13.8 12.1 10.2 8.7 8.6 1200 N N N N P E E E E E E E E E E B B B B A
1050 N N N N P E E E E E E E E E E B B B A
900 N N N N P E E E E E E E E B B B B A
750 N N N N P E E E E E E E B B B B A
Notes 600 N N N N P E E E E E B B B B B A
- Design limits acc. to ASME B16.5 flange rating mat. grp 1.3 500 N N N N D D D D D D D D D D A
- Due to supply chain constraints the wall thickness for pipe DN300 (NPS12) SCH20 (6.35 mm/ 0.25 inch) is 450 N N N N D D D D D D D D D A
ordered as per MESC description with wall thickness 7.14mm (0.281 inch). 400 N N N N D D D D D D D D A
- For bending of pipe see DEP 31.38.01.31-Gen. 350 N N N N D D D D D D D A
- For basis of design see DEP 31.38.01.10-Gen. 300 N N N N D D D D D D A
- Piping class range DN 15 [NPS 1/2]up to/incl DN 600[NPS 24] design meets full vacuum at ambient condition 250 N N N N D D D D D A
For DN 750 [NPS 30] to 1200 [NPS 48], if vacuum condition can occur, piping to be designed accordingly 200 N N N N D D D D A
- ASME B16.5 flange rating mat. grp 1.3 is historically based on the application of ASTM A352 grade LCB valve 150 N N N N D D D A
body material. 100 N N N N D D A
- Non-extended bonnet valves in this piping class are intended for short term low temperature excursion (e.g 80 N N N N D A
non-operable during depressurization) (or) non-insulated piping only. 50 N N M M J
- Piston type check valves (DN 15-40) [NPS 1/2-1-1/2] for horizontal mounting only 40 N M M J
- The choice of gate valves, swing type check valves vs triple eccentric butterfly valves, dual plate check valves 25 M M J
shall be based upon total purchase and installation cost, as well as weight and space savings. Eccentric butterfly 20 M J
valves and dual plate check valves shall not be used in fouling or abrasive services. 15 J

Table of schedules
Code Explanation of characters
DN Schedule A Equal tee
15 80 B Reducing tee
20 80 D Pipe to pipe
25 80 E Branch outlet
40 80 J Equal tee BW (alternative SW)
50 40 M Reducing tee BW (alternative SW)
80 40 N Branch fitting (alternative Branch outlet SW)
100 40 P Branch outlet BW (alternative Branch outlet SW)
150 40
200 20
250 20
300 20
350 20
400 20
450 20
500 20
600 20
750 10
900 10
1050 STD
1200 STD

Carbon steel LT H-Sour Plant

Class no. 11175 Consignee
ASME rating CLASS 150 Engineered by
Corrosion allowance 1 mm Principal
Revision letter I Contr. job no.
Revision date 02/2017 Project no.

This document has been supplied under license by Shell to: Metric units
UOP Honeywell ted.fuger@honeywell.com 24/01/2018 01:48:18
 DEP 31.38.01.12-Gen Class 11175, rev. I Page 3 of 14

COMPONENT MATERIAL DESCRIPTION

(For full material description see relevant MESC buying description.)

Pipe Valves

PIPE Pipe DN 15-600 ASTM A333-6 BUTF Butterfly valve triple of flgd DN 200-1200 Body: ASTM A352-LCC
PIPE Pipe DN 750-1200 ASTM A671-CC65 cl 22 Trim: LTCS, Duplex, Stellite
CHDF Check valve dual plate flgd DN 300-1200 Body: ASTM A352-LCC
Flanges Trim: AISI 316, Stellite
CHVF Check valve flgd DN 15-50 Body: ASTM A350-LF2 cl 1
BLFL Blind flange DN 15-1200 ASTM A350-LF2 cl 1 Trim: AISI 316, Stellite
LJFL Lap joint flange --- ASTM A350-LF2 cl 1 CHVF Check valve flgd DN 80-600 Body: ASTM A350-LF2 cl 1/A352-LCC
SBNF Spectacle blind DN 15-400 ASTM A516-60/65/70 Trim: AISI 316, Stellite
SPFL Spade DN 750-1200 ASTM A516-70 GANF Gate valve n-ext flgd DN 15-40 Body: ASTM A350-LF2 cl 1
SPNF Spade DN 15-600 ASTM A516-60/65/70 Trim: AISI 316, Stellite
SPRT Spacer ring DN 750-1200 ASTM A516-60/65/70 GAVF Gate valve flgd DN 15-50 Body: ASTM A350-LF2 cl 1
SRNF Spacer ring DN 15-600 ASTM A516-60/65/70 Trim: AISI 316, Stellite
WNFL Welding neck flange DN 15-1200 ASTM A350-LF2 cl 1 GAVF Gate valve flgd DN 80-600 Body: ASTM A350-LF2 cl 1/A352-LCC
Trim: AISI 316, Stellite
Fittings GLVF Globe valve flgd DN 15-50 Body: ASTM A350-LF2 cl 1
Trim: AISI 316, Stellite
CAPB Cap bw DN 15-1200 ASTM A420-WPL6 GLVF Globe valve flgd DN 80-200 Body: ASTM A350-LF2 cl 1/A352-LCC
E45B Elbow 45 deg LR bw DN 15-600 ASTM A420-WPL6 Trim: AISI 316, Stellite
E45B Elbow 45 deg LR bw DN 750-1200 ASTM A420-WPL6W
E90B Elbow 90 deg LR bw DN 15-600 ASTM A420-WPL6 Instruments
E90B Elbow 90 deg LR bw DN 750-1200 ASTM A420-WPL6W
TEEB Tee equal bw DN 15-600 ASTM A420-WPL6 TWND Thermowell flgd DN 40 DN 40-40 AISI 316
TEEB Tee equal bw DN 750-1200 ASTM A420-WPL6W TWNS Thermowell flgd DN 40 L=230 mm --- AISI 316
TWNL Thermowell flgd DN 40 L=255 mm --- AISI 316
Reducing fittings
Miscellaneous
BN3F Branch fitting flgd DN 40-1200 ASTM A350-LF2 cl 1
BN3P Branch fitting plain DN 40-1200 ASTM A350-LF2 cl 1 GKMA Gasket camprofile DN 750-1200 AISI 316, Graphite
BROB Branch outlet bw DN 600-1200 ASTM A350-LF2 cl 1 SS centring ring
BRSB Branch outlet bw DN 600-1200 ASTM A350-LF2 cl 1 GKSW Gasket spiral wound DN 15-600 AISI 316, Graphite
RECB Reducer concentric bw DN 20-600 ASTM A420-WPL6 CS centring-/SS inner ring
RECB Reducer concentric bw DN 750-1200 ASTM A420-WPL6W MTRR Meterrun DN 15-40 AISI 316/ASTM A350-LF2 cl 1 end flanges
REEB Reducer eccentric bw DN 20-600 ASTM A420-WPL6 ORFS Orifice flange set DN 50-600 ASTM A350-LF2 cl 1
REEB Reducer eccentric bw DN 750-1200 ASTM A420-WPL6W PLUG Plug NPT DN 15-50 ASTM A350-LF2 cl 1
TERB Tee reducing bw DN 20-600 ASTM A420-WPL6 ST1B Strainer Y-type (1 mm ca) DN 50-400 Sieve: AISI 316
TERB Tee reducing bw DN 750-1200 ASTM A420-WPL6W STBT Studbolt with nuts --- ASTM A320-L7M/A194-7M

This document has been supplied under license by Shell to: Metric units
UOP Honeywell ted.fuger@honeywell.com 24/01/2018 01:48:18
 DEP 31.38.01.12-Gen Class 11175, rev. I Page 4 of 14

PIPING COMPONENTS

Nominal pipe size

15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600 750 900 1050 1200
Item description MESC

Pipe

Pipe 743016 0 211 291 371 531 591 671 751 841 911
Pipe 743016 1 031 161 291 391 641
Pipe 743016 2 041 341
Pipe 743021 0 371
Pipe 743021 1 001 581
Pipe 743021 2 121

Flanges

Blind flange 766212 4581 4621 4661 4681 4701 4721 4741 4761 4781 4801 4821 4841 4861 4881 4901 4921
Blind flange 767013 0561 0621 0681 0741
Spacer ring 768875 3631 3661 3691 3721
Spacer ring 768906 0081 0121 0161 0181 0201 0221 0241 0261 0281 0301 0321 0341 0361 0381 0401 0441
Spade 768895 3631 3661 3691 3721
Spade 768935 0011 0021 0031 0041 0051 0061 0071 0081 0091 0101 0111 0121 0131 0141 0151 0161
Spectacle blind 768966 1081 1121 1161 1181 1201 1221 1241 1261 1281 1301 1321 1341 1361
Welding neck flange 766282 1521 1541 1561 1581 1101 1121 1141 1161 0081 0101 0121 0141 0161 0181 0201 0241
Welding neck flange 767083 0161 0381 0571 0741

Fittings

Cap bw 763117 1681 1741 1801 1881 2081 2281 2461 2661 2821 3031 3251 3451 3651 3841 3941 4041 5371 6001 6581 7121
Elbow 45 deg LR bw 763134 1681 1741 1801 1881 2081 2281 2461 2661 2821 3031 3251 3451 3651 3841 3941 4041 5131 6671 7361 7981
Elbow 90 deg LR bw 763143 1681 1741 1801 1881 2081 2281 2461 2661 2821 3031 3251 3451 3651 3841 3941 4041 5171 6671 7361 8001
Tee equal bw 763180 1681 1741 1801 1881 2081 2281 2461 2661 2821 3031 3251 3451 3651 3841 3941 4041 5131 6631 7391 7991

Valves

Butterfly valve triple of flgd 774133 0151 0161 0171 0181 0191 0201 0211 0231 0261 0291 0321 0341
Check valve dual plate flgd 776720 0171 0181 0191 0201 0211 0231 0261 0291 0321 0341
Check valve flgd 771033 0031 0041 0051 0071 0091 0101 0121 0141 0151 0161 0171 0181 0191 0201 0211 0231
Gate valve flgd 772033 9031 9041 9051 9071 9081 9101 9121 9141 9151 9161 9171 9181 9191 9201 9211 9231
Gate valve n-ext flgd 772041 9031 9041 9051 9071
Globe valve flgd 773033 0031 0041 0051 0071 0091 6101 6121 6141 6151

This document has been supplied under license by Shell to: Metric units
UOP Honeywell ted.fuger@honeywell.com 24/01/2018 01:48:18
 DEP 31.38.01.12-Gen Class 11175, rev. I Page 5 of 14

PIPING COMPONENTS
Nominal pipe size
15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600 750 900 1050 1200
Item description MESC

Miscellaneous

Gasket camprofile 854190 0481 0541 0601 0661

Gasket spiral wound 854136 3041 3061 3081 3121 3141 3181 3201 3241 3261 3281 3301 3321 3341 3361 3381 3421
Meterrun 766596 3021 3041 3061 3081
Orifice flange set 766297 0881 0891 0241 0261 0031 0041 0051 0061 0071 0081 0091 0101
Plug NPT 760563 0081 0121 0161 0181 0201
Strainer Y-type (1 mm ca) 768322 5021 5041 5061 5081 6051 6061 5221 6081 5241

This document has been supplied under license by Shell to: Metric units
UOP Honeywell ted.fuger@honeywell.com 24/01/2018 01:48:18
 DEP 31.38.01.12-Gen Class 11175, rev. I Page 6 of 14

REDUCING/PIPING COMPONENTS

Run x Br RECB REEB TERB Thermowell flgd DN 40

20 x 15 7631661371 7631751371 7631880351 Length (mm) MESC number
25 x 15 7631661471 7631751471 7631880451 230 7683370311
25 x 20 7631661571 7631751571 7631880551 255 7683370321
40 x 15 7631661671 7631751671 305 7683370331
40 x 20 7631661771 7631751771 7631880751 355 7683370341
40 x 25 7631661871 7631751871 7631880851 405 7683370351
50 x 20 7629451901 7629601901 455 7683370361
50 x 25 7631661981 7631751981 7631881091
50 x 40 7631662061 7631752061 7631881181
80 x 40 7631662261 7631752261
80 x 50 7631662351 7631752351 7631881321
100 x 40 7631662501 7631752501
100 x 50 7631662651 7631752651 7631881531
100 x 80 7631662751 7631752751 7631881651
150 x 80 7631662951 7631752951 7631881771
150 x 100 7631663051 7631753051 7631881891
200 x 100 7631663221 7631753221 7631882101
200 x 150 7631663331 7631753331 7631882301
250 x 100 7629453401 7629603401 7631882581
250 x 150 7631663531 7631753531 7631882761
250 x 200 7631663611 7631753611 7631882891
300 x 150 7631663861 7631753861 7631883151
300 x 200 7631663921 7631753921 7631883261
300 x 250 7631664021 7631754021 7631883481
350 x 150 7629456001 7629606001
350 x 200 7631664231 7631754231 7631883881
350 x 250 7631664301 7631754301 7631884131
350 x 300 7631664421 7631754421 7631884391

This document has been supplied under license by Shell to: Metric units
UOP Honeywell ted.fuger@honeywell.com 24/01/2018 01:48:18
 DEP 31.38.01.12-Gen Class 11175, rev. I Page 7 of 14

REDUCING/PIPING COMPONENTS

Run x Br RECB REEB TERB

400 x 200 7631664541 7631754541
400 x 250 7631664631 7631754631 7631885031
400 x 300 7631664781 7631754701 7631885291
400 x 350 7631664821 7631754821 7631885541
450 x 250 7631665201 7631755201 7631886021
450 x 300 7631665501 7631755501 7631886261
450 x 350 7631665811 7631755811 7631886501
450 x 400 7631666111 7631756111 7631886741
500 x 300 7631666401 7631756401 7631887461
500 x 350 7631666711 7631756711 7631887701
500 x 400 7631667011 7631757011 7631887941
500 x 450 7631667311 7631757311 7631888181
600 x 300 7631888661
600 x 350 7631888901
600 x 400 7631668811 7631758811 7631889141
600 x 450 7631669111 7631759111 7631889381
600 x 500 7631669531 7631759411 7631889621

Comp.name Description
BN3F Branch fitting flgd
BN3P Branch fitting plain
BROB Branch outlet bw
BRSB Branch outlet bw
RECB Reducer concentric bw
REEB Reducer eccentric bw
TERB Tee reducing bw

This document has been supplied under license by Shell to: Metric units
UOP Honeywell ted.fuger@honeywell.com 24/01/2018 01:48:18
 DEP 31.38.01.12-Gen Class 11175, rev. I Page 8 of 14

REDUCING/PIPING COMPONENTS

Run x Br RECB REEB TERB Run x Br RECB REEB TERB

750 x 400 7629950671 1050 x 600 7629954881
750 x 450 7629950871 1050 x 750 7629955481
750 x 500 7629951071 1050 x 900 7629546081 7629746081 7629956081
750 x 600 7629541271 7629741271 7629951271 1200 x 600 7629957531
900 x 450 7629952431 1200 x 750 7629958131
900 x 500 7629952631 1200 x 900 7629958731
900 x 600 7629952831 1200 x 1050 7629549331 7629749331 7629959331
900 x 750 7629543431 7629743431 7629953431

This document has been supplied under license by Shell to: Metric units
UOP Honeywell ted.fuger@honeywell.com 24/01/2018 01:48:18
 DEP 31.38.01.12-Gen Class 11175, rev. I Page 9 of 14

REDUCING/PIPING COMPONENTS

Branch Run pipe BN3F BN3P BROB BRSB

15 40 - 40 7680375411 7680315021
15 50 - 50 7680375431 7680315031
15 80 - 200 7680375441 7680315041
15 250 - 900 7672306021 7672579601
15 1050 - 1200 7672306031 7672579611
20 50 - 50 7680375461 7680315061
20 80 - 100 7680375471 7680315071
20 150 - 300 7680375491 7680315081
20 350 - 900 7672306061 7672579651
20 1050 - 1200 7672306071 7672579661
25 80 - 80 7680375531 7680315111
25 100 - 100 7680375551 7680315121
25 150 - 250 7680375561 7680315131
25 300 - 900 7672306101 7672579701
25 1050 - 1200 7672306111 7672579711
40 80 - 80 7680375591 7680315161
40 100 - 100 7680375601 7680315171
40 150 - 150 7680375621 7680315181
40 200 - 300 7680375631 7680315191
40 350 - 600 7680375651 7680315201
40 750 - 900 7672306151 7672579751
40 1050 - 1200 7672306161 7672579761
50 600 - 900 7679504321
50 1050 - 1200 7679511091
80 600 - 600 7679504451
80 750 - 900 7679511211
80 1050 - 1200 7679511321

This document has been supplied under license by Shell to: Metric units
UOP Honeywell ted.fuger@honeywell.com 24/01/2018 01:48:18
 DEP 31.38.01.12-Gen Class 11175, rev. I Page 10 of 14

REDUCING/PIPING COMPONENTS

Branch Run pipe BN3F BN3P BROB BRSB

100 600 - 900 7679504541
100 1050 - 1200 7679511391
150 600 - 600 7679504621
150 750 - 750 7679511461
150 900 - 900 7679511491
150 1050 - 1200 7679511521
200 600 - 600 7679041941
200 750 - 750 7679118781
200 900 - 900 7679118791
200 1050 - 1050 7679119661
200 1200 - 1200 7679119681
250 600 - 600 7679042101
250 750 - 750 7679118801
250 900 - 900 7679118811
250 1050 - 1050 7679119781
250 1200 - 1200 7679119801
300 750 - 750 7679118821
300 900 - 900 7679118831
300 1050 - 1050 7679119901
300 1200 - 1200 7679119921
350 750 - 750 7679118841
350 900 - 900 7679118851
350 1050 - 1050 7679120011
350 1200 - 1200 7679120031
400 900 - 900 7679118871
400 1050 - 1050 7679120131
400 1200 - 1200 7679120151
450 1050 - 1050 7679120231
450 1200 - 1200 7679120251
500 1050 - 1050 7679120271
500 1200 - 1200 7679120291

This document has been supplied under license by Shell to: Metric units
UOP Honeywell ted.fuger@honeywell.com 24/01/2018 01:48:18
 DEP 31.38.01.12-Gen Class 11175, rev. I Page 11 of 14

BOLTING

Std boltset standard flg Std boltset blind/spacer

DN nr inch x mm MESC number DN nr inch x mm MESC number
15 4 1/2 x 60 8138671531 15 4 1/2 x 70 8138671551
20 4 1/2 x 70 8138671551 20 4 1/2 x 80 8138671571
25 4 1/2 x 70 8138671551 25 4 1/2 x 80 8138671571
40 4 1/2 x 80 8138671571 40 4 1/2 x 80 8138671571
50 4 5/8 x 90 8138672711 50 4 5/8 x 100 8138672731
80 4 5/8 x 100 8138672731 80 4 5/8 x 110 8138672741
100 8 5/8 x 100 8138672731 100 8 5/8 x 110 8138672741
150 8 3/4 x 110 8138673301 150 8 3/4 x 120 8138673321
200 8 3/4 x 110 8138673301 200 8 3/4 x 130 8138673341
250 12 7/8 x 120 8138674011 250 12 7/8 x 140 8138674041
300 12 7/8 x 120 8138674011 300 12 7/8 x 150 8138674061
350 12 1 x 140 8138674691 350 12 1 x 170 8138674741
400 16 1 x 140 8138674691 400 16 1 x 170 8138674741
450 16 1 1/8 x 150 8138675291 450 16 1 1/8 x 180 8138675331
500 20 1 1/8 x 160 8138675301 500 20 1 1/8 x 200 8138675441
600 20 1 1/4 x 180 8138675901 600 20 1 1/4 x 220 8138675971
750 28 1 1/4 x 240 8138676001 900 32 1 1/2 x 340 8138677021
900 32 1 1/2 x 290 8138676901 1050 36 1 1/2 x 360 8138677051
1050 36 1 1/2 x 300 8138676961 1200 44 1 1/2 x 390 8138677081
1200 44 1 1/2 x 330 8138677011

Std boltset mrun flg

DN nr inch x mm MESC number
15 4 5/8 x 130 8138672781
20 4 5/8 x 130 8138672781
25 4 5/8 x 130 8138672781
40 4 3/4 x 140 8138673351

Std boltset orifice flg

DN nr inch x mm MESC number
50 8 5/8 x 130 8138672781
80 8 3/4 x 140 8138673351
100 8 3/4 x 150 8138673371
150 12 3/4 x 150 8138673371
200 12 7/8 x 170 8138674091
250 16 1 x 190 8138674771
300 16 1 1/8 x 210 8138675381
350 20 1 1/8 x 220 8138675401
400 20 1 1/4 x 230 8138675981
450 24 1 1/4 x 250 8138676061
500 24 1 1/4 x 260 8138676031
600 24 1 1/2 x 290 8138676901

This document has been supplied under license by Shell to: Metric units
UOP Honeywell ted.fuger@honeywell.com 24/01/2018 01:48:18
 DEP 31.38.01.12-Gen Class 11175, rev. I Page 12 of 14

ASSEMBLIES

Drain or vent point DN 15 Fig.I DN15 - 15 Pressure instr conn DN 15 Fig.0J DN15 - 15
Branch: according to branch table Branch: according to branch table
Blind flange 1 7662124581 Lap joint flange 1 7662208061
Welding neck flange 1 7662821521 Pipe 1 7430160211
Gasket spiral wound 1 8541363041 Welding neck flange 1 7662821521
Studbolt with nuts 4 8138671531 Gasket spiral wound 2 8541363041
Gate valve flgd 1 7720339031
Drain or vent point DN 20 Fig.H DN50 - 50 Studbolt with nuts 4 8138671551
Branch: branch nipple flanged Studbolt with nuts 4 8138671531
Blind flange 1 7662124621
Gasket spiral wound 1 8541363061 Pressure instr conn DN 20 Fig.0J DN20 - 40
Studbolt with nuts 4 8138671551 Branch: according to branch table
Lap joint flange 1 7662208441
Drain or vent point DN 20 Fig.I DN20 - 40 Pipe 1 7430160291
Branch: according to branch table Welding neck flange 1 7662821541
Blind flange 1 7662124621 Gasket spiral wound 2 8541363061
Welding neck flange 1 7662821541 Gate valve flgd 1 7720339041
Gasket spiral wound 1 8541363061 Studbolt with nuts 4 8138671551
Studbolt with nuts 4 8138671551 Studbolt with nuts 4 8138671551

Drain or vent point DN 25 Fig.H DN80 - 300 Pressure instr conn DN 20 Fig.0H DN50 - 1200
Branch: branch nipple flanged Branch: branch nipple flanged
Blind flange 1 7662124661 Lap joint flange 1 7662208441
Gasket spiral wound 1 8541363081 Gasket spiral wound 2 8541363061
Studbolt with nuts 4 8138671551 Gate valve n-ext flgd 1 7720419041
Gate valve flgd 1 7720339041
Drain or vent point DN 40 Fig.H DN350 - 1200 Studbolt with nuts 4 8138671551
Branch: branch nipple flanged Studbolt with nuts 4 8138671551
Blind flange 1 7662124681
Gasket spiral wound 1 8541363121 Temp instr conn DN 40 Fig.NL DN150 - 1200
Studbolt with nuts 4 8138671571 Branch: branch nipple flanged
Lap joint flange 1 7662208471
Meter run connection DN 15 Fig.0H DN15 - 40 Gasket spiral wound 1 8541363121
Branch: not applicable Thermowell flgd DN 40 L=255 mm 1 7683370321
Lap joint flange 2 7662208061 Studbolt with nuts 4 8138671591
Gasket spiral wound 4 8541363041
Gate valve n-ext flgd 2 7720419031 Temp instr conn DN 40 Fig.NS DN80 - 100
Gate valve flgd 2 7720339031 Branch: branch nipple flanged
Studbolt with nuts 8 8138671551 Lap joint flange 1 7662208471
Studbolt with nuts 8 8138671531 Gasket spiral wound 1 8541363121
Thermowell flgd DN 40 L=230 mm 1 7683370311
Orifice connection DN 15 Fig.0I DN50 - 600 Studbolt with nuts 4 8138671591
Branch: not applicable
Lap joint flange 2 7662208061
Welding neck flange 2 7662821521
Gasket spiral wound 4 8541363041
Gate valve n-ext flgd 2 7720419031
Gate valve flgd 2 7720339031
Studbolt with nuts 8 8138671551
Studbolt with nuts 8 8138671531

This document has been supplied under license by Shell to: Metric units
UOP Honeywell ted.fuger@honeywell.com 24/01/2018 01:48:18
 DEP 31.38.01.12-Gen Class 11175, rev. I Page 13 of 14

ALTERNATIVE COMPONENT MATERIAL DESCRIPTION (SOCKET WELDED) ALTERNATIVE PIPING COMPONENTS (SOCKET WELDED)
(For full material description see relevant MESC buying description.) Nominal pipe size
15 20 25 40 50 80 100 150
Flanges Item description MESC

FLWS Flange sw DN 15-50 ASTM A350-LF2 cl 1 Flanges

Fittings Flange sw 766272 1011 1021 1031 1041 0051

CAS3 Cap sw cl 3000 DN 15-50 ASTM A350-LF2 cl 1 Fittings

COS3 Coupling sw cl 3000 DN 15-50 ASTM A350-LF2 cl 1
E4S3 Elbow 45 deg sw cl 3000 DN 15-50 ASTM A350-LF2 cl 1 Cap sw cl 3000 763423 0081 0121 0161 0181 0201
E9S3 Elbow 90 deg sw cl 3000 DN 15-50 ASTM A350-LF2 cl 1 Coupling sw cl 3000 763425 0081 0121 0161 0181 0201
TES3 Tee equal sw cl 3000 DN 15-50 ASTM A350-LF2 cl 1 Elbow 45 deg sw cl 3000 763436 0081 0121 0161 0181 0201
UNS3 Union sw cl 3000 DN 15-50 ASTM A350-LF2 cl 1 Elbow 90 deg sw cl 3000 763436 5081 5121 5161 5181 5201
Tee equal sw cl 3000 763479 0081 0121 0161 0181 0201
Reducing fittings Union sw cl 3000 763486 0081 0121 0161 0181 0201

B3ST Bosset sw x thrd DN 40-1200 ASTM A350-LF2 cl 1 Valves

BR3S Branch outlet sw DN 40-1200 ASTM A350-LF2 cl 1
CRS3 Coupling reducing sw cl 3000 DN 20-50 ASTM A350-LF2 cl 1 Check valve sw 771102 1531 1541 1551 1571 1581
IRS3 Insert reducing sw cl 3000 DN 20-50 ASTM A350-LF2 cl 1 Gate valve n-ext sw 772191 1531 1541 1551 1571
SCBP Swage concentric bw x plain DN 80-100 ASTM A420-WPL6 Gate valve n-ext sw x thrd 772198 1531 1541 1551 1571 1581
SEBP Swage eccentric bw x plain DN 80-100 ASTM A420-WPL6 Gate valve sw 772190 4531 4541 4551 4571 4581
TRS3 Tee reducing sw cl 3000 DN 20-50 ASTM A350-LF2 cl 1 Gate valve sw x thrd 772197 4531 4541 4551 4571 4581
Globe valve sw 773190 4531 4541 4551 4571 4581
Valves Globe valve sw x thrd 773197 4531 4541 4551 4571 4581

CHVS Check valve sw DN 15-50 Body: ASTM A350-LF2 cl 1 Miscellaneous

Trim: AISI 316, Stellite
GANS Gate valve n-ext sw DN 15-40 Body: ASTM A350-LF2 cl 1 Plug Bosset sw x thrd 768066 8281 8321 8361 8381 8401
Trim: AISI 316, Stellite
GANT Gate valve n-ext sw x thrd DN 15-50 Body: ASTM A350-LF2 cl 1
Trim: AISI 316, Stellite
GAST Gate valve sw x thrd DN 15-50 Body: ASTM A350-LF2 cl 1
Trim: AISI 316, Stellite
GAVS Gate valve sw DN 15-50 Body: ASTM A350-LF2 cl 1
Trim: AISI 316, Stellite
GLST Globe valve sw x thrd DN 15-50 Body: ASTM A350-LF2 cl 1
Trim: AISI 316, Stellite
GLVS Globe valve sw DN 15-50 Body: ASTM A350-LF2 cl 1
Trim: AISI 316, Stellite

Miscellaneous

BPST Plug Bosset sw x thrd DN 15-50 ASTM A350-LF2 cl 1

This document has been supplied under license by Shell to: Metric units
UOP Honeywell ted.fuger@honeywell.com 24/01/2018 01:48:18
 DEP 31.38.01.12-Gen Class 11175, rev. I Page 14 of 14

Branch Run pipe B3ST BR3S

15 40 - 40 7680650021 7673120021
15 50 - 50 7680650041 7673120041
15 80 - 200 7680650061 7673120061
15 250 - 900 7680650081 7673120081
15 1050 - 1200 7680650101 7673120101
20 50 - 50 7680650121 7673120121
20 80 - 100 7680650141 7673120141
20 150 - 300 7680650161 7673120161
20 350 - 900 7680650181 7673120181
20 1050 - 1200 7680650201 7673120201
25 80 - 80 7680650221 7673120221
25 100 - 100 7680650241 7673120241
25 150 - 250 7680650261 7673120261
25 300 - 900 7680650281 7673120281
25 1050 - 1200 7680650301 7673120301
40 80 - 80 7680650321 7673120321
40 100 - 100 7680650341 7673120341
40 150 - 150 7680650361 7673120361
40 200 - 300 7680650381 7673120381
40 350 - 600 7680650401 7673120401
40 750 - 900 7680650431 7673121481
40 1050 - 1200 7680650441 7673120441
50 600 - 900 7680650561 7673120561
50 1050 - 1200 7680650581 7673120581
ALTERNATIVE REDUCING/PIPING COMPONENTS (SOCKET WELDED)

Run x Br CRS3 IRS3 SCBP SEBP TRS3

20 x 15 7634280061 7634410061 7634820061
25 x 15 7634280231 7634410231 7634820231
25 x 20 7634280251 7634410251 7634820251
40 x 15 7634280331 7634410331
40 x 20 7634280351 7634410351 7634820351
40 x 25 7634280371 7634410371 7634820371
50 x 15 7634280431 7634410431
50 x 20 7634280451 7634410451
50 x 25 7634280471 7634410471 7634820471
50 x 40 7634280491 7634410491 7634820491
80 x 40 7625651811 7625851811
80 x 50 7625651931 7625851931
100 x 40 7625652281 7625852281
100 x 50 7625652401 7625852401

This document has been supplied under license by Shell to: Metric units
UOP Honeywell ted.fuger@honeywell.com 24/01/2018 01:48:18