20/11/2019
SCT INSTALLATION GUIDELINE ON
WINDOWS 10
1
20/11/2019
From the folder SCTDist5.0.8, run “setup”
2
20/11/2019
Click on the “Next” button
3
20/11/2019
Click on the “Yes” button
4
20/11/2019
Insert the license key and afterwards click
the button “Next”
5
20/11/2019
Click on the “Next” button
6
20/11/2019
Select the language and click on the “Next”
button
7
20/11/2019
Click on the “Next” button
8
20/11/2019
9
20/11/2019
Select “Connect using local area network”
and afterwards click on the “Next” button
10
20/11/2019
Click on the “Finish” button
11
20/11/2019
Verify that, after the installation, there is the
SCT icon on the desktop
12
20/11/2019
USB connection configuration
Connect the USB cable from the PC to the
Alc+2e, and verify in Device Manager the
presence of the USB Serial Device under
“Ports menu”
13
20/11/2019
Right click on “USB Serial Device”, select
“Update Driver” and afterwards select
“Browse my computer...”
14
20/11/2019
The SCT driver for Windows 10 is provided by a separate package.
Browse for driver folder on your computer (see the example below):
Click on “OK” and then “Next” button
15
20/11/2019
The following pop-up window could appear:
in this case, click on 'Install this software anyway'"
16
20/11/2019
Siae driver on going installation
17
20/11/2019
Siae driver has been installed. Click on the
“Close” button
18
20/11/2019
19
20/11/2019
Siae driver already installed, click on the “X”
button
20
20/11/2019
Inside “Network and Sharing Centre”, click on
“Set up a new connection or network”
21
20/11/2019
Select “connect to the internet” and click on
the “Next” button
22
20/11/2019
Click on “Dial-up”
23
20/11/2019
1 – Insert “123” in “Dial-up phone number”
2 – Insert the connection’s name – the name 3 – Click on the “Next” button
must be “LctDirectPPP”
24
20/11/2019
Click on the “Skip” button
25
20/11/2019
Click on the “Close” button
26
20/11/2019
In “Network and Sharing Centre”, click on
“Change adapter setting””
27
20/11/2019
Verify that in menu “Network Connections”
there is the “LctDirectPPP” connection’s icon
28
20/11/2019
Right click on the icon “LctDirectPPP”, select “Proprerties” and
verify that in “Connect using” it’s written “Modem – Siae
Connection.....”
29
20/11/2019
1 – Click on the “Configure” button
2 – Verify that this configuration is present
3 – Close all windows
30
20/11/2019
Double click on the SCT icon
31
20/11/2019
Left click on “Options”
32
20/11/2019
1 – Select “Connect using direct serial cable” 2 – Left click on the “Settings” button
33
20/11/2019
1 - Verify that for “Connect using” it’s 2 – Click on the “OK”
selected “Modem – SiaeMic Connection......” button
3 – Click on the“OK”
button
34
20/11/2019
Left click on the “Connect” button
35
20/11/2019
Connection “Authenticating”
36
20/11/2019
1 – This is the local IP of the Idu
2 -Insert User and Password
3 - Left click on the “Ok” button
37
20/11/2019
Established connection.
Double left click to open the IDU
menu
38
20/11/2019
39
