PRECISION ABRASIVE WATERJET SYSTEMS
80X SERIES
OMAX 80X Series JetMachining Center
The OMAX 80X Series is a robust and reliable abrasive waterjet system available in several length variants
designed for your specific needs. The bridge-style 80X Series is ideal for cutting larger or multiple part projects in
a variety of materials. The 80X Series employs the innovative patent-pending Intelli-TRAX® linear drive technology
designed exclusively for the abrasive waterjet environment, ensuring superior accuracy and high durability for greater
productivity and profitability.
FEATURES & BENEFITS
• Fastest cutting speeds and best precision compared to any • Machines a wide range of materials and thicknesses, from metals
abrasivejet in the industry and is backed by our exclusive Intelli- and composites to glass and plastics
MAX® Software with real world cutting data • Does not create heat-affected zones or mechanical stresses
• Programmable Motorized Z-Axis with a precision MAXJET® 5i • No tool changes and minimal fixturing reduces setup by 50% or
Nozzle Assembly can boost cutting productivity and process more
efficiency • No additional water required for pump cooling
• Increase machining capacity with optional DualBRIDGE system • Small, efficient footprint for minimal floorspace utilization
• Low maintenance, high reliability scissor-style hard plumbing • Leaves behind a satin-smooth edge, reducing secondary operations
• Drive system sealed against water, dirt, and grit. • No noxious gases, liquid and oils used in, or caused by, the
• High efficiency Generation 4 EnduroMAX® pump systems available machining process
up to 100 hp with operating efficiencies up to 85% • EnduroMAX pump technology delivers the highest nozzle
• Rapid Water Level Control for quiet and clean submerged cutting horsepower in the industry for faster and more efficient cutting
• Bulk Abrasive Feed Assembly transports garnet from the assembly’s • Completes most work below 80 dBA at one meter for submerged
large hopper into the Zero Downtime Hopper located at the cutting
Motorized Z-Axis • Environmentally “green” system with quiet and clean operation with
• Shipped pre-assembled and factory-tested low electrical consumption
• Highly robust and reliable pump design capable of over 1000
hours between maintenance
The OMAX Technology Guarantee
entitles you, as the original owner, to
free OMAX software upgrades for the
life of the machine.
80X SERIES
MACHINE DIMENSIONS STANDARD MODEL SPECIFICATIONS
22’1” x 12’8” to 35’0” x 15’0” Material Support Slats 4" x 1/8" Galvanized Steel
Footprint (with controller) (6,731 mm x 3,861 mm to
10,668 mm x 4,572 mm) Maximum Supported 400 lbs/sq ft (1,950 kg/sq
Material Load meter)
9,000 lbs to 13,000 lbs
Weight (tank empty)
(4,082 kg to 5,897 kg) 3-Phase, 380-480 VAC ±10%,
Electrical Requirements
50-60 Hz
Height (with scissor plumbing) 12’0” (3,658 mm)
Below 80 dBA at one meter for
34,000 lbs to 54,000 lbs Noise Level
Operating Weight submerged cutting
(15,422 kg to 24,494 kg)
180 to 350 in/min
WORK ENVELOPE Speed
(4,572 to 8,890 mm/min)
13’4” x 6’8” to 26’8” x 6’8” Accuracy ±0.001” (±0.025 mm)
X-Y Cutting Travel* (4,064 mm x 2,032 mm to
8,128 mm x 2,032 mm) Repeatability ±0.001” (±0.025 mm)
Z-Axis Travel* 8” (203mm) Ballbar Circularity ±0.003” (±0.127 mm)
15’0” x 7’5” to 28’3” x 7’5”
Table Size (4,572 mm x 2,261 mm to OPTIONAL ACCESSORIES
14,783 mm x 2,261 mm)
• Tilt-A-Jet® Cutting Head • Second MAXJET 5i with
DRIVE DESCRIPTION
• Variable Speed SRS (VS-SRS) Motorized Z-Axis (requires
• Intelli-TRAX drive technology with • Collision Sensing Terrain second Y-Axis carriage)
• Closed loop, digital drives Follower (with Tilt-A-Jet only) • Laminar Filter
linear encoders in X-Axis
• Brushless servo motors • Z-Axis Drill • Large Solids Removal System
• Precise Motorized Z-Axis
• Precision Optical Locator (POL) • Waterjet Brick Kit
• Water-only MAXJET 5 for cutting • Rotary Axis
80X soft materials • Air and Water Conditioning Kit
X-Y Cutting Travel: 13’ 4” x 6’ 8” • OMAX Mini MAXJET 5i Nozzle • A-Jet®
(4,064 mm x 2,032 mm)
Assembly • Terrain Follower/A-Jet
• DualBRIDGE second bridge • Material Holding Kit
• Manual Tilt Z • Laser Feature Finder
*Optional accessories may reduce travel. Photos may show optional
accessories. For a complete list of accessories, contact an OMAX sales
80X-1 representative. Pumps are built to meet UL and CE specifications. Contact
X-Y Cutting Travel: 20’ 0” x 6’ 8” OMAX for detailed utility requirements.
(6,096 mm x 2,032 mm)
ABOUT OMAX
OMAX is the global total solutions provider in advanced abrasive waterjet
80X-2 systems. Our intuitive Intelli-MAX Software Suite simplifies programming and
X-Y Cutting Travel: 26’ 8” x 6’ 8” reduces setup times, increasing your productivity. OMAX engineers continue to
(8,128 mm x 2,032 mm) innovate technology for waterjet machining, from proven 4th generation pump
designs to cutting edge drive systems with micron-level accuracy. With the larg-
est abrasive waterjet support network in the world, OMAX continues to shape
the future of waterjets.
To see how an OMAX JetMachining Center can save you time and money, call
or visit our website and request a free part analysis today.
ABRASIVE WATERJET
OMAX CORPORATION
vs. OTHER METHODS 21409 72nd Avenue South
WWW.OMAX.COM/COMPARE Kent, WA 98032
Specifications subject to change without notice. WWW.OMAX.COM TEL 1-253-872-2300 / 1-800-838-0343
600045D © OMAX Corporation October 2015 Made in the USA FAX 1-253-872-6190
