PRECISION ABRASIVE WATERJET SYSTEMS

2652

OMAX 2652 JetMachining Center

The original OMAX JetMachining® Center, the 2652 is a popular fixture in machine shops and fabrication facilities.
The proven OMAX technology leads to efficient production through fast and accurate cutting of complex parts out of
most materials. With the simple yet powerful Intelli-MAX® Software Suite and innovative optional accessories such as
the Tilt-A-Jet®, the 2652 can quickly switch from near net blank shape cutting to high precision machining.

FEATURES & BENEFITS

•   Fastest cutting speeds and best precision compared to any •   Machines a wide range of materials and thicknesses, from metals
abrasivejet in the industry and is backed by our exclusive Intelli- and composites to glass and plastics
MAX Software with real world cutting data •   Designed and manufactured at the OMAX factory in Kent,
•   Programmable Motorized Z-Axis with a precision OMAX Washington, USA
MAXJET®5i Nozzle boosts productivity and process efficiency •   Does not create heat-affected zones or mechanical stresses
•   Optional Tilt-A-Jet taper eliminating abrasivejet cutting head •   No tool changes & minimal fixturing dramatically reduce setup
•   Precision X-Y Axis rigidly mounted to the cutting table •   Uses substantially less cooling water than inefficient hydraulic
•   Pre-loaded linear bearings and precision ball screws intensifier pumps
•   Easy operator access to the work area •   Small, efficient footprint for minimal floor space utilization
•   Low maintenance, high reliability scissor-style hard plumbing •   Lowest electrical consumption compared to other pump technology
•   Drive system sealed against water, dirt, and grit •   Leaves behind a satin-smooth edge, reducing secondary operations
•   High efficiency Generation 4 EnduroMAX® pump systems available •   No noxious fumes, liquids, or oils used in, or caused by, the machining
in 30, 40, or 50 hp with operating efficiencies up to 85% process
•   Robust and accurate design for tight tolerance cutting and reliable •   EnduroMAX pump technology delivers the highest nozzle
operation horsepower in the industry for faster and more efficient cutting
•   Rapid Water Level Control for quiet submerged cutting •   Completes most work below 80 dBA
•   Optional Variable Speed Solids Removal System (VS-SRS) designed •   Environmentally “green” system uses only natural garnet abrasive
for industrial use increases uptime through automated solids removal and water in the cutting process
•   Factory tested as a complete system before shipping •   Highly robust and reliable pump design capable of over 1000
hours between maintenance

The OMAX Technology Guarantee

entitles you, as the original owner, to
free OMAX software upgrades for the Specifications subject to change without notice.
life of the machine.
600036G © OMAX Corporation July 2017
2652
MACHINE DIMENSIONS STANDARD MODEL SPECIFICATIONS

11’ 7” x 5’ 7” 4" x 1/8" Galvanized Steel

Footprint (with controller) Material Support Slats
(3,531 mm x 1,702 mm) (102 mm x 3 mm)

Weight (tank empty) 3,320 lb (1,506 kg) Maximum Supported 400 lbs/sq ft
Material Load (1,950 kg/sq meter)
Height (with scissor plumbing) 7’ 11” (2,413 mm)
3-Phase, 380-480 VAC ±10%,
Electrical Requirements
50-60 Hz
Operating Weight 9,150 lb (4,150 kg)
Below 80 dBA at one meter for
Noise Level
WORK ENVELOPE submerged cutting

Speed 180 in/min (4,572 mm/min)

4’ 4” x 2’ 2”
X-Y Cutting Travel*
(1,321 mm x 660 mm)
Linear Positional Accuracy* ±0.001” (±0.025 mm)
Z-Axis Travel
8” (203 mm) Repeatability* ±0.001” (±0.025 mm)
(with Motorized Z Axis)*

5’ 9” x 2’ 6” Ballbar Circularity* ±0.0025” (±0.064 mm)

Table Size
(1,753 mm x 762 mm)
OPTIONAL ACCESSORIES
DRIVE DESCRIPTION
•   Tilt-A-Jet Cutting Head for taper •   Intelli-VISOR FSP Monitoring
•   Closed loop, digital drives •   Linear bearings with hardened elimination Expansion Package
•   Brushless servo motors precision ground ways •   Collision Sensing Terrain •   Variable Speed Solids Removal
•   Pre-loaded ball screws, •   Cantilever Y-axis on bridge Follower System (VS-SRS)
recirculating ball bearings X-axis •   Rotary Axis •   Z-Axis Pneumatic Drill
•   Precision Optical Locator (POL) •   Water-only MAXJET 5 Nozzle
•   7/15 Mini MAXJET5 Nozzle •   Manual Tilt Z-Axis
•   OMAX Mini MAXJET 5i Nozzle •   Laser Feature Finder
•   Laminar Filter •   Bulk Abrasive Delivery
•   Waterjet Brick Kit Assembly Catcher Tank Armor
•   Material Holding Kit Plating
•   Splash Shield Kit •   Stainless Steel Tank Cover Kit
•   Air & Water Conditioning Kit •   Extended Slat Package
•   Water Recycling System

*Optional accessories may reduce cutting travel. Photos may show optional
accessories. For a complete list of accessories, contact an OMAX sales
representative. Accuracy specifications are at 72° F (22° C) Pumps are built to
meet UL and CE specifications. Contact OMAX for detailed utility requirements.

ABOUT OMAX

OMAX is the global total solutions provider in advanced abrasive waterjet

systems. Our intuitive Intelli-MAX Software Suite simplifies programming and
reduces setup times, increasing your productivity. OMAX engineers continue
to innovate technology for abrasive waterjet machining, from proven 4th
generation pump designs to cutting edge drive systems with micron-level
accuracy. With the largest abrasive waterjet support network in the world,
OMAX continues to shape the future of waterjets.

To see how an OMAX JetMachining Center can save you time and money, call
or visit our website and request a free part analysis today.

OMAX CORPORATION
21409 72nd Avenue South
UL 508A, CAN/CSA C22.2 No. 14, WWW.OMAX.COM Kent, WA 98032
CAN/CSA C22.2 No. 73
ISO 9001:2015 Certified Made in the USA TEL 1-253-872-2300 / 1-800-838-0343