Manual Cutting Machines

Small cutting machines with power and endurance...

It‘s all down to the right cut!

Novita Plus

www.kuris.de
 Contents

Introduction................................................................................................................... 3

Novita rotating blade machines

Innovative products in
Novita Standard.................................................................................................... 4-5
HIGH-TECH QUALITY
Novita Plus ............................................................................................................ 6-7
Novita Super.................................................................................................... 8-9
Novita Jet.............................................................................................................. 10-11
Rechargeable rotating blade machines
MB-60.................................................................................................................... 12-13 It is difficult to imagine cutting and spreading without
Kuris handheld cutting machines.
BOM rotating blade machines
BOM 30.................................................................................................................. 14-15
BOM 101 / S / Power.............................................................................................. 16-17

KRS rotating blade and four-arc cutting machine

KRS 550.................................................................................................................. 18-19 The machine has to cater for the operator‘s method of
working and not the other way round.
KSM rotating blade machine
KSM 200 L / R...................................................................................................... 20-21

KVS/KV straight-knife cloth cutters

KVS 700.................................................................................................................. 22-23
KVS 900.................................................................................................................. 24-25
KV 1602/2002........................................................................................................ 26-27

Reproduction, inclusion in online services as well as distribution on data carriers is only permitted with the permission of Kuris Spezialmaschinen GmbH.
Errors and omissions excepted.
2
Small cutting machines Straight-knife cloth cutters Who needs these strong and flexible machines?
Ladies, gentlemen and childrens‘ clothing, sports and professi-
Make the step towards a better cut Sharp, quick, convenient application. Easy and reliable to onal clothing factories, linen, knitwear and hosiery production,
operate. stocking makers, bed linen, bed and quilt makers, curtain and

F it in the cutting industry starts with accurately cut material home décor material production and the entire home decora-

K
or technical textiles. Seldom has a handheld cutting tool uris straight-knife cloth cutters with cutting heights of 70 to tion sector, upholstered furniture industry, saddlers, tanneries,
been so keenly tailored to the cutter. Cutting thick layers, into 210 mm are the ideal tools for all cutting operations. leather manufacturers, glove manufacturers, hat and bonnet
tight corners, at acute angles–this is precisely what the machi- From pattern-making through to cutting multiple layers, they production, toys and dolls‘ clothes manufacture.
nes are designed for. The quality of the cut—that is decided by: are suitable for all flexible surface structures, such as textiles,
the cutter and the cutting blade. Kuris‘ new small cutting ma- knitwear and knitted goods, technical textiles and special ma-
chines glide easily through the fabric; they produce a cleaner terials, such as films, felt, Skai branded films and soft leather Workshops of public authorities, hospitals, weaving mills,
cut and are more manageable. etc. home textiles, tie manufacturers, handcraft industry, slipcover
manufacturers, dockyard and ship rigging, carpet factories, lar-

T T
oday, rotating blade machines are used primarily for he machines excel in being able to keep to the curves. ge book binders, fibre glass processing companies, woven felt
straight, long cross cuts. Thanks to the smooth, clean cut Thanks to its particularly narrow and low construction, the factories, automotive, shoe-makers, pushchair manufacturers,
they are also excellently suited to knitted goods and knitwear machine provides good visibility of the blade. A special coa- manufacturers of camping articles, caravan manufacturers, fur
as well as linings and other materials that are susceptible to ting offers excellent glide properties and considerable wear processors, paper board factories, office furniture manufactur-
fraying and the build-up of fluff. There are also various ap- resistance. ers and fisheries.
plications in the manufacture of upholstered furniture and
mattresses (cutting upholstery and diol fabrics etc.) in felt, cot-
ton wool and dressing material, blanket, carpet and bodywork The machine has to cater for the operator‘s method of wor-
factories. The rotating blade gets its cutting effect in combinati- king and not the other way round. Several advantages at a glance:
on with the jaw with knife-edged joints fitted to the base plate.

S
The integrated grinding device resharpens the blade. Steel liding handle, carrying handle presser handle, on/off switch - Excellent handling
blades with a higher service life can be supplied for extreme and sharpening tool activation are optimally configured. - Lower cutting resistance
loads. The finger guard provides safety when cutting and offers The machines are carefully balanced and easy to manage. - Lower power requirement
protection against injuries. Whoever works with them feels they are an extension to them- - Better around curves
selves. The blade is sharpened on both sides as it is lifted up - Better cutting speed

T he drive motors can be designed for DC and AC current. If

required, Kuris rotating blade machines can be fitted with
a four-arc knife and counter blade for cutting plastic material
and down. Unusually even and exact. The layers of material are
therefore always cut cleanly, free from fraying right down to the
bottom layer of material.
and rubber etc. The special half-speed or multiple speed motor
is then recommended. The machine can then be fitted with a
blade damping device to prevent the knife from becoming en-
crusted with cutting residues. A n important feature (especially with the KVS 900) is that
it is not possible for the grinding equipment drive to be
damaged when the grinding attachment comes up against an
obstacle (e.g. a layer of material).

3
 Novita Standard

33283 - Novita Standard

Flat base
For cutting all kinds of materials in the outer wear industry

4
Novita Standard
Technical data
Application area
Motor power: approx. 56 watts
Effortlessly clean and without considerable technical in- Motor data: 220 V / 50 Hz
vestment you are therefore able to cut all manner of textiles
Operating time: 60 %
and soft leather. There are applications for single layer and
multiple layer cutting, particularly for cutting templates and Motor speed (idle): approx. 11,000 rpm
patterns. Also ideal for trimming defective parts, for cutting Motor speed (idle): approx. 2600 rpm
knitwear and knitted goods straight and curtains, upholstery Blade diameter: 50 mm
and decorative fabrics true to form, even for an unconventi- Knife wear limit: approx. 42 mm
onal application. Icelandic fishermen separate the tail fins of Cutting height, max.: 8 mm
plaice and other fish using the Novita Standard. The lubricator Motor diameter: approx. 50 mm
decreases friction between the blade and counter blade, en- Machine length: approx. 230 mm
abling laminated goods to be cut. Machine weight, excluding cable: approx. 850 g
Vibration: < 2.5 m/s
Running noise: 73 dB(A)

The Novita Standard is fully insulated and VDE tested.

A special combination gear mechanism gives the machine a
unique motor speed strength across the entire load range. The
motor only gets moderately warm, preventing overload and 25508 - Skid base 28456 - Skid base with pro-
guaranteeing the highest protection and service life. The blade tective ball
guard in warning colour is easily and infinitely adjustable and
does not obscure blade visibility. The operating handle for the
grinding device has been shaped in such a way that the bla-
de can be sharpened using one hand, even during the cutting
operation. Handling and management of the machine is easy
and balanced. There is the option of three bases depending on
the application:
For cutting thicker materials (upholstery For cutting delicate materials (no fibre
the skid base, flat base or the skid base with protective ball. etc.) and for an exact template cut. damage).

5
 Novita Plus

56715 - Novita Plus

Flat base
For cutting all kinds of materials in the outer wear industry

6
Novita Plus
Technical data
Application area
Motor power: approx. 56 watts
A particularly convenient and lightweight machine for cutting
all kinds of textiles for layers up to approx. 8 mm high, depen- Motor data: 220 V / 50 Hz
ding on the type of material. Especially suitable for wool and Operating time: 60 %
soft materials. Either the flat base or the cutting skid may be Motor speed (idle): approx. 12,400 rpm
used. The lubricator decreases friction between the blade and Motor speed (idle): approx. 3000 rpm
counter blade, enabling laminated goods to be cut. Blade diameter: 50 mm
Blade wear limit: approx. 42 mm
Cutting height, max.: 8 mm
Motor diameter: approx. 50 mm
The Novita Plus is fully insulated and VDE tested. Machine length: approx. 230 mm
A special combination gear mechanism gives the machine a Machine weight excluding cable: approx. 850 g
unique motor speed strength across the entire load range. The
Vibration: < 2.5 m/s
motor only gets moderately warm, preventing overload and
Running noise: 73 dB(A)
guaranteeing the highest protection and service life. The blade
guard in warning colour is easily and infinitely adjustable and
does not obscure blade visibility. The operating handle for the
grinding device has been shaped in such a way that the bla-
de can be sharpened using one hand, even during the cutting
operation. Handling and management of the machine is easy
and balanced.

7
 Novita Super

33294 - Novita Super

Flat base
For cutting all kinds of materials in the outer wear industry

8
Novita Super
Technical data
Application area
Motor power: approx. 56 watts
The „Novita Super“ provides concentrated force to withstand
Motor data: 220 V / 50 Hz
heavy and even the most difficult of loads. The cutting perfor-
mance is 10 x greater than that of the Novita Standard version. Operating time: 60 %
Particularly handy and lightweight machine for cutting all ty- Motor speed (idle): approx. 12,500 rpm
pes of material in layers up to approx. 8 mm high, depending Motor speed (idle): approx. 1500 rpm
on the material. Blade diameter: 50 mm
Blade wear limit: approx. 42 mm
Cutting height, max.: 8 mm
Particularly suitable for needled felt, Skai branded films, soft Motor diameter: approx. 50 mm
leather and upholstery cover materials. The lubricator reduces Machine length: approx. 260 mm
friction between the blade and the counter blade, enabling la-
Machine weight excluding cable: approx. 1,000 g
minated goods to be cut.
Cutting machine for template and pattern making, cutting Vibration: < 2.5 m/s
single layers, re-cutting defective parts, straight cutting true to Running noise: 73 dB(A)
form, light load (outer wear materials, knitted goods and knit-
wear, curtain, upholstery and decoration fabrics etc.).

25508 - Skid base 28456 - Skid base with

protective ball

For cutting thicker materials (upholstery

For cutting delicate materials (no fibre
etc.) and for an exact template cut.
damage).

9
 Novita Jet

33278 - Novita Jet

Flat base
For cutting all kinds of materials in the outer wear industry

10
Novita Jet
Technical data
Application area
Motor power: 0.15 kW
The Novita Jet is a modified version of the Novita-Standard,
Motor speed (idle): approx. 1900 rpm
however compressed air operated. It provides ease of use and
increased performance everywhere where no electrical con- Operating pressure: 6 bar (max)
nection is possible for safety reasons, e.g. in wet areas. Untiring Tube width, clearance: 6 mm
and reliable just like all Kuris‘ NOVITA cutting machines. Air consumption at nominal load: 0.25 Nm3/min
The lubricator reduces friction between the blade and the Cutting height, max.: 8 mm
counter blade, enabling laminated materials to be cut. Housing diameter: 38 mm
Machine length: approx. 220 mm
Machine weight, excluding tube: approx. 0.9 kg
The Novita Jet is driven by compressed air. Therefore every sa-
fety risk is eliminated (overload and the electric motor burn
out).
The motor cannot overheat even at a constant output and ca-
pacity overload. The outlet air is evacuated to the rear through
a double-walled tube–inner tube for supply air; outer tube for
discharged air and released into the atmosphere far away from
where the cutter is working. It therefore no longer presents a
disruption to anyone, either as a result of draughts (air swirls,
cold effect, circulating fluff ) or even by whistling.

25508 - Skid base 28456 - Skid base with protec-

tive ball

For cutting thicker materials (upholstery For cutting delicate materials (no fibre
etc.) and for an exact template cut. damage).

11
 RECHARGEABLE cutting machine MB-60

68032 - RECHARGEABLE cutter MB-60

Flat base
For cutting all kinds of materials in the outer wear industry

12
RECHARGEABLE cutting machine MB-60

Application area
Technical data
The RECHARGEABLE MB-60 offers the user considerably grea-
ter mobility and convenience during operation. The particular- Motor voltage: 9.6 V
ly convenient and lightweight machine is suitable for cutting Idle running speed: 1200 min/1
all kinds of textiles for layers up to approx. 8 mm high, depen- Weight including battery: 1.2 kg
ding on the type of material.
Type of battery: NiCad
Also ideal for wool and soft materials. The lubricator reduces Nominal voltage: 9.6 V
friction between the blade and the counter blade, enabling Capacity: 1.2 AH
laminated goods to be cut. Battery weight: 0.5kg

The machine offers a good mechanical operating ratio. At the

fore are the MB-60‘s compact size and light weight.

Quick battery changes are very easy. The machine comes with
a charger as standard.

MB-60-52 charger
The machine comes with a charger as standard.

13
 BOM 30

33028 -BOM 30

14
BOM 30
Technical data
Application area
BOM 30 / BOM 30 S input motor power: approx. 140 watts
A particularly convenient and lightweight machine for cutting all
Motor data: 230 V / 50 Hz
kinds of textiles for layers up to approx. 25 mm high, depending on
the type of material. Especially suitable for wool and soft materials. Motor speed (idle): approx. 8000 rpm
The lubricator reduces friction between the blade and the counter Motor speed (idle): approx. 1000 rpm
blade, enabling laminated goods to be cut. Blade diameter: 80 mm
For universal use for cutting single and multiple layers, light to me- Blade wear limit: approx. 72 mm
dium load (traditional clothing materials, such as knitted goods, Cutting height, max.: approx. 27 mm
knitwear and decorative fabrics etc.) Vibration: < 2.5 m/s
Running noise: 73 dB(A)
Also available with an extended handle (also with automatic ON/ Weight: 2.2 kg excluding cable
OFF switch) and special base for aluminum track for trimming end-
less fabric.

Benefits:
With the BOM 30 series of electric handheld cutters, the cutting
effect is produced by a six-arc blade in conjunction with a sprung-
loaded adjacent counter blade. This cutting principle enables good
cutting performance at relatively low blade speeds.
Individual layers of the finest materials and layers of material up to a
cutting height of 25 mm can be cut equally well. High traction force
thanks to a robust motor with a high power margin. Optimal blade
propulsion across synchronous belts and cylindrical gears with ex-
cellent operating efficiency. Practically maintenance-free thanks to
a special seal. Highest performance and service life due to very low
heat generation in the motor and gears.
Sturdy reliability thanks to the sprung-loaded counter blade. With
carbide counter blade and HSS blade for heavy materials on re-
quest. Every machine possesses an adjustable finger guard based
on employers‘ liability insurance regulations. Not susceptible to The BOM 30 SK and BOM 30 SL versions are supplied with a special base that is fed into an
aluminum profile track. The BOM 30 SL with the long handle and automatic on/off switch is
contaminants, threads and fluff thanks to the special development particularly suitable for trimming endless fabric.
and construction of the support and gear mechanism housing.

15
 BOM 101

54856 - BOM 101

49095 - BOM 101 Power

16
BOM 101
Technical data
Application area
Motor data: 230 V / 50 Hz
A particularly convenient and lightweight machine for cutting all
BOM 101, BOM 101 S motor power: approx. 200 watts
kinds of textiles for layers up to approx. 25 mm high, depending on
the type of material. The fortified „Power“ version is particularly Motor power of the BOM 101 Power, BOM 101 S Power: approx. 238 watts
suitable for jeans, leather and rigid fabrics as well as industrial fa- Motor speed (idle): approx. 10,000 rpm
brics. The lubricator reduces friction between the blade and coun- Motor speed (idle): approx. 750 rpm
ter blade, enabling laminated materials to be cut. Blade diameter: 100 mm
Blade wear limit: approx. 93 mm
Benefits: Cutting height, max.: approx. 25 mm
With the BOM series of electric handheld cutters, the cutting ef- Vibration: < 2.5 m/s
fect is produced by a four-arc or six-arc blade in conjunction with Running noise: 73 dB(A)
a sprung-loaded adjacent counter blade. This cutting principle en-
Weight: 3 kg
ables good cutting performance at relatively low blade speeds. In-
dividual layers of the finest materials and layers of material up to a
cutting height of 25 mm can be cut equally well.
High traction force thanks to a robust motor with a high power
margin. Optimal gear mechanism made from a special alloy with
excellent operating efficiency and simple maintenance. Practically
maintenance-free thanks to a special seal. 54588 - BOM 101 SK
Highest performance and service life due to very low heat generati- 56027 - BOM 101 SK Power
on in the motor and gear mechanism.
54589 - BOM 101 SL
Sturdy reliability thanks to the sprung-loaded counter blade, espe- 56028 - BOM 101 SL Power
cially for heavy materials.
Not susceptible to contaminants, threads and fluff thanks to the
special development and construction of the support and gear me-
chanism housing.

Easy to operate
Light handling and handy machine controls in all cutting positions thanks to
the„bone grip“. Grinding device very easy to operate thanks to the ideal con-
figuration of the operating element. Optimal view of the workpiece thanks to
the oval shape of the housing. Very low running noise. Quick blade change
thanks to easy and very accessible blade fixing. The BOM 101 SK and BOM 101 SL versions are supplied with a special base that is fed into an
aluminum profile track. The BOM 101 SL with the long handle and automatic on/off switch is
particularly suitable for trimming endless fabric.

17
 KRS 550

33425 - KRS 550

18
KRS 550
Technical data
Application area
KRS 550 model
The KRS 550 model of the KURIS cutting machine can be supplied as
a rotating blade or four-arc machine with counter blade. It is possib- (Max.) cutting height in mm 55
le to convert a rotating blade machine to a four-arc blade machine Blade diameter in mm 120
or vice versa using an appropriate unit. Weight of the machine in kg 10.5
Blade wear limit: approx. 93 mm
KRS 550 with rotating blade Running noise <70 dB(A)
Weight: 10.5 kg
1. For cutting all kinds and designs of textile
materials.

2. Particularly suitable for cutting knitwear and knitted A.C. change-pole

goods and quilted materials that tend to fray easily or 400V, 50 Hz 400V, 50 Hz
produce fluff.
Motor power in watts 370 200 280
Motor speed rpm 2800 1400 2800
KRS 550 with four-arc blade and counter blade
Motor speed rpm 1140 570 1140
1. For cutting synthetic materials that tend to be over a certain
height for bonding cut edges.
2. For cutting plastic materials (Skai branded films etc.)
3. For cutting laminated flooring.
4. For cutting synthetic rubber interwoven materials
(also rubber or soft rubber up to a certain height).

The KRS 550 can be fitted with a blade damping device to prevent
the blade from becoming encrusted with cutting residues. A Teflon-
coated blade is recommended for cutting particularly critical mate-
rial, e.g. asbestos.

19
 KSM 200 Q L / R

33326 - KSM 200 right

33327 - KSM 200 left
53648 - KSM 200 cross cutter
53647 - KSM 200 left
53646 - KSM 200 right

20
KSM 200 Q L / R
Application area
Standard version 1. Option (on request) 2. Option (on request)
Edge and middle cutters for special applications, individual custo-
mer solutions or special machine construction.
018kW 230/400V 0.37kW 230/400V 0.37kW 230/400V
Motor data:
1.2/0.7 A 50 (60)Hz 2.2/1.27A 50Hz 1.61/0.92A 50(60)Hz
The KSM 200in left-hand and right-hand design
(33327 or 33326) Speed 1350 1/min (1650 1/min) 1350 1/min 2800 1/min (3335 1/min)
The KSM 200 machines have a rotating blade made from tool steel,
a grinding device with two sharpening edges and no base plate.
We recommend the rotating blade in HSS quality for certain types
of cut.

You can distinguish between left and right by looking at the machi-
ne from the side of the blade. If the grinding device is located on
the left, this is a left-hand version. If the grinding device is located
on the right, this is right-hand version.

Left-hand and right-hand versions of the KSM 200 L 53647 - KSM 200 L left-hand
(53647 or 53646)
The ‚L‘ stands for lengthways cutter. Even this machine is cons-
tructed in a left and right-hand version, i.e. for use as a pair for trim-
ming endless fabric etc. The KSM 200 L possesses an HSS quality
four-arc blade, a coordinated unilateral grinding device and a base 53648-KSM 200 Q
plate with counter blade, i.e. it can only cut in the one direction.

KSM 200 Q (53648)

The ‚Q‘ stands for lengthways cutter. This machine also has an HSS
quality four-arc blade, unilateral grinding device and, in contrast to 33327 - KSM 200 left-hand
the KSM 200 L model, a base plate with two counter blades, enab-
ling the KSM 200 Q model to cut in both directions.
3326 - KSM 200 right-hand

53646 - KSM 200 L right-hand

21
 KVS 700

57694 - KVS 700 UVV

22
KVS 700 Technical data
Application area
Motor data: 220-250 V WS 50/60 Hz
The ideal machine for all cutting operations, from pattern making to
Max.cutting height: approx. 70 mm
cutting multiple layers, with maximum cutting heights of 8 to 210
mm, for flexible surface structures such as textile fabrics, knitted Motor power: approx. 140 watts
goods and knitwear, technical textiles and special materials such as Blade stroke: 12-15- 18 mm
films, felt, Skai branded films and soft leather etc. Weight: 6 kg

The KVS 700 straight-knife cloth cutter bridges the former gap
between electric handheld cutting machines and conventional
straight-knife cloth cutters for thick layers. An electric handheld
cutting machine with a rotating blade will have problems cutting
acute angles and tight curves at certain layer heights. In contrast,
even darts, necklines and similar can be cut out using a single-knife
cloth cutter.
Benefits:
The base plates for the Kuris straight-knife cloth cutters are The good cutting performance is the result of the high stroke rate
provided with a special coating. This offers excellent glide pro- of the blade, the tips of which only project a little way from the
perties and high wear resistance. No more chrome and no dazz- base plate, making it possible to achieve a clean cut for a smaller
ling reflections. Scratches are simply polished out. number of layers. The grinding equipment is semi-automatic, i.e.
the two grinding discs are power driven and the grinding device is
lifted by hand. The blade driving mechanism and guide have been
optimised. All the rotating parts run on ball bearings. The machine
is therefore virtually maintenance-free.

23
 KVS 900

33865 - KVS 900 A.C.

33866 - KVS 900 D.C.
57695 - KVS 900 UVV A.C.
57696 - KVS 900 UVV D.C.

24
KVS 900 Technical data
Application area
Max. cutting height: approx. 90 mm
The KVS 900 straight-knife cloth cutter is the machine for the job. Motor speed (idle): 2800 rpm
Ideally suited to cutting every type and design of textile material, Blade stroke: 36 mm
though particularly for cutting thick layers, tight curves and acute Vibration: 2.5 m/s
angles. Weight: approx. 8.4 kg
Running noise: 70 dB(A)
Straight-knife cloth cutter for average layer heights, even for difficu-
lt to cut materials, high cutting accuracy thanks to the very small di-
mensions of the base plate, support and blade, fatigue-proof work
with quiet running, good overview and low weight.

We play it safe when it comes to safety.

Just like all Kuris models, the Kuris KVS 900 meets the relevant safe-
Benefits:
ty standards. Possible sources of danger are already ruled out at the
Exact, sharp cut thanks to the automatic grinding device with whetstones.
design stage. Therefore the presser foot bar with only a 13 mm gap
Sturdy special motor with a high power margin. Narrow supports reduce
from the blade takes on an additional function as a blade guard.
effort. Low base plate with a special surface minimises slide resistance.

An important feature (especially with the KVS 900) is that it is not pos-
sible for the grinding device drive to be damaged when the grinding
device comes up against an obstacle (e.g. a layer of material).

The very high lifting speed of the grinding head at approx.

1 s per sharpening operation reduces sharpening times quite con-
siderably, making it possible for the grinding wheel to reach an op-
timum of 7 rpm. The blade is sharpened on both sides as it is lifted
up and down. Unusually even and exact. The layers of material are
therefore always cleanly cut, free from fraying right down to the
bottom layer of material.

25
 KV1602 E/U

34476 - KV 1602 E
57828 - KV 1602 UVV
34478 - KV 2002 E
57829 - KV 2002 UVV

26
KV 1602 / 2002 E/UVV Technical data
Application area

The straight-knife cloth cutter is suitable for cutting every type and Cutting Motor power in watts at rpm Blade stroke Weight
design of textile materials, though especially for cutting thick lay- Model
ers, tight curves and acute angles, right up to the heaviest loads of cm A.C. A.C. pu-motor Alternating mm kg
all kinds of clothing materials and practically every industrial fabric
KV 1602 16 550-2800 200/280-1400/2800 370-2800 38 14,5
etc.
KV 2002 20 550-2800 200/280-1400/2800 370-2800 38 14,5
Benefits:
The machine has an automatic grinding device and is largely main-
tenance-free. The machine is easy to move.

KV 1602, KV 2002

Exact, sharp cut thanks to the automatic grinding device with sanding belts

- Sturdy special motor with a high power margin

- Narrow support for reducing effort

- Low base plate with a special surface for minimising

slide resistance

- Machine and blade guard equipment to CE and accident prevention

regulations

- Made in Germany

Grinding device with sanding belts Multi-layer cutting

27
 Blouses P r o d u c t p r o g r a m m e :
Curtains Fully automatic cutting technology
Tents CAD software solutions
Specialist for innovative Jackets Round knife cloth machines
spreading and cutting technology
Sofas Straight-knife cloth cutters
The many years of experience Filter Automatic servo cutters
and the innovative thinking of the
Kuris company enable fast and Automotive seat Rotation hoop knife machines
professional customer support
you will not forget and a perfect covers Manual, semi-automatic and
worldwide service. We offer the
optimal product range for com- Tarpaulins fully automatic spreading machines
plete cutting from a single sour-
ce. You will be impressed by the Trousers Cutting and spreading tables
quality our products. We will be Conveyor belts
happy to advise you.
Airbags
Floor coverings Special machines

Insulation
Seating
Clothes Kuris Spezialmaschinen GmbH
Degginger Straße 6
Coats D-73326 Deggingen-Reichenbach
Phone: +49 (0) 73 34 - 9 24 80 - 0
Linen Fax: +49 (0) 73 34 - 9 24 80 - 69
Email: info@kuris.de
Shoes www.kuris.de