4 3 2 1

ITEM NO. PART NUMBER DESCRIPTION QTY.

1 N2 WATER STAND BASE AND TOP 2
2 N3 SIDE SUPPORTS 2

3 0 B18.2.3.3M - HEAVY HEX SCREW, 8

M12 X 1.75 X 60 --30N

B B
3

A A
UNLESS OTHERWISE SPECIFIED:
MATERIAL NAME DATE
IOWA STATE UNIVERSITY
OAK DIMENSIONS ARE IN MILLIMETERS DRAWN DANNIA THORPE 11/11/2020
TOLERANCES: MECHANICAL ENGINEERING DEPARTMENT
ANGULAR: MACH 1
TWO PLACE DECIMAL .5 CHECKED
THREE PLACE DECIMAL .05
DESCRIPTION
INTERPRET GEOMETRIC
TOLERANCING PER: ASME Y14.5 WATER BASE ASSEMBLY
PROPRIETARY AND CONFIDENTIAL SIZE PART NO. REV

B AN2000 2
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
THE OWNERS. ANY REPRODUCTION
IN PART OR AS A WHOLE WITHOUT THE
WRITTEN PERMISSION IS PROHIBITED. DO NOT SCALE DRAWING SCALE: 1:15 VOLUME: SHEET 1 OF 1

4 3 2 1
 2 1

8X .25
1.00 16X .3125 .25

8X .25

1.00
B 8.75
B
4.38

2.38

8X .07 THRU ALL

3.312
3.438 .12 X 100°
6.624

15.5000
NAME DATE
IOWA STATE UNIVERSITY
A A
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES DRAWN Alex Sipe 11/13/2020 MECHANICAL ENGINEERING DEPARTMENT
TOLERANCES:
ANGULAR: MACH 1 CHECKED --- ---
ME 270 - SECTION 02
TWO PLACE DECIMAL .5
THREE PLACE DECIMAL .05 MATERIAL DESCRIPTION

INTERPRET GEOMETRIC
TOLERANCING PER: ASME Y14.5
.75" PLYWOOD
BASE
PROPRIETARY AND CONFIDENTIAL SIZE PART NO. REV
A N-3001
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF 1
THE OWNERS. ANY REPRODUCTION
IN PART OR AS A WHOLE WITHOUT THE
WRITTEN PERMISSION IS PROHIBITED.
DO NOT SCALE DRAWING SCALE: 1:10 SHEET 1 OF 1

2 1
 2 1

7.50 3X .07 .13

.25
B .25 .50
B

4X .07 THRU ALL

.12 X 100°

3.75

1.00

NAME DATE
IOWA STATE UNIVERSITY
A A
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES DRAWN Alex Sipe 11/13/2020 MECHANICAL ENGINEERING DEPARTMENT
TOLERANCES:
ANGULAR: MACH 1 CHECKED --- --- ME 270 - SECTION 02
TWO PLACE DECIMAL .5
THREE PLACE DECIMAL .05 MATERIAL DESCRIPTION

INTERPRET GEOMETRIC
TOLERANCING PER: ASME Y14.5
.75" PLYWOOD LONGER SIDE WALL
PROPRIETARY AND CONFIDENTIAL SIZE PART NO. REV
A N-3002
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF 1
THE OWNERS. ANY REPRODUCTION
IN PART OR AS A WHOLE WITHOUT THE
WRITTEN PERMISSION IS PROHIBITED.
DO NOT SCALE DRAWING SCALE: 1:5 SHEET 1 OF 1

2 1
 2 1

B B
.50

.07 .13

7.25

.25 14.50
2X .07 .13

5.00

1.00 .50 NAME DATE

IOWA STATE UNIVERSITY
A A
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES DRAWN Alex Sipe 11/13/2020 MECHANICAL ENGINEERING DEPARTMENT
TOLERANCES:
ANGULAR: MACH 1 CHECKED --- --- ME 270 - SECTION 02
TWO PLACE DECIMAL .5
THREE PLACE DECIMAL .05 MATERIAL DESCRIPTION

INTERPRET GEOMETRIC
TOLERANCING PER: ASME Y14.5
.75" PLYWOOD SIDE WALL
PROPRIETARY AND CONFIDENTIAL SIZE PART NO. REV
A N-3003
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF 1
THE OWNERS. ANY REPRODUCTION
IN PART OR AS A WHOLE WITHOUT THE
WRITTEN PERMISSION IS PROHIBITED.
DO NOT SCALE DRAWING SCALE: 1:5 SHEET 1 OF 1

2 1
 2 1
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 N21 1/2 Inch PVC Telescoping 4
Support
2 N20 1 Inch PVC Telescoping Support 4
3 N22 90 Deg Socket Elbow 4
4 N23 1/2 Inch Top Support 4

B 5 ASME B18.8.2 -
0.25x2.5 Pin 4 B
3

1 NAME DATE
IOWA STATE UNIVERSITY
A A
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN MILLIMETERS DRAWN YOUR NAME 10/16/2020 MECHANICAL ENGINEERING DEPARTMENT
TOLERANCES:
ANGULAR: MACH 1 CHECKED --- --- ME 270 - SECTION 05
TWO PLACE DECIMAL .5
THREE PLACE DECIMAL .05 MATERIAL DESCRIPTION

INTERPRET GEOMETRIC
SHOWER STRUCTURE ASSEMBLY
TOLERANCING PER: ASME Y14.5

PROPRIETARY AND CONFIDENTIAL SIZE PART NO. REV

A AN5000
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF 0
2 THE OWNERS. ANY REPRODUCTION
IN PART OR AS A WHOLE WITHOUT THE
WRITTEN PERMISSION IS PROHIBITED.
DO NOT SCALE DRAWING SCALE: 1:50 SHEET 1 OF 1

2 1
 4 3 2 1

24.000

B B

24.000

2X 0 THRU ALL
0 X 100°

.250 .500
3.000
A A
UNLESS OTHERWISE SPECIFIED:
MATERIAL NAME DATE
IOWA STATE UNIVERSITY
OAK DIMENSIONS ARE IN MILLIMETERS DRAWN DANNIA THORPE 10/16/2020
TOLERANCES: MECHANICAL ENGINEERING DEPARTMENT
ANGULAR: MACH 1
TWO PLACE DECIMAL .5 CHECKED
THREE PLACE DECIMAL .05
DESCRIPTION
INTERPRET GEOMETRIC
TOLERANCING PER: ASME Y14.5 WATER STAND SIDE SUPPORTS
PROPRIETARY AND CONFIDENTIAL SIZE PART NO. REV

B N3 0
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
THE OWNERS. ANY REPRODUCTION
IN PART OR AS A WHOLE WITHOUT THE
WRITTEN PERMISSION IS PROHIBITED. DO NOT SCALE DRAWING SCALE: 1:10 VOLUME: 287.22 SHEET 1 OF 1

4 3 2 1
 4 3 2 1

B B
19.000

10.500

A A
UNLESS OTHERWISE SPECIFIED:
MATERIAL NAME DATE
IOWA STATE UNIVERSITY
ABS DIMENSIONS ARE IN MILLIMETERS DRAWN DANNIA THORPE 10/16/2020
TOLERANCES: MECHANICAL ENGINEERING DEPARTMENT
.394 ANGULAR: MACH
TWO PLACE DECIMAL
1
.5 CHECKED
THREE PLACE DECIMAL .05
DESCRIPTION
INTERPRET GEOMETRIC
TOLERANCING PER: ASME Y14.5 WATER STORAGE TANK
PROPRIETARY AND CONFIDENTIAL SIZE PART NO. REV

B N1 0
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
THE OWNERS. ANY REPRODUCTION
IN PART OR AS A WHOLE WITHOUT THE
WRITTEN PERMISSION IS PROHIBITED. DO NOT SCALE DRAWING SCALE: 1:5 VOLUME: 5 GALLONS SHEET 1 OF 1

4 3 2 1
 2 1

B .42 B

2.00 .25

25.00

NAME DATE
IOWA STATE UNIVERSITY
A A
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN MILLIMETERS DRAWN YOUR NAME 10/16/2020 MECHANICAL ENGINEERING DEPARTMENT
TOLERANCES:
ANGULAR: MACH 1 CHECKED --- --- ME 270 - SECTION 05
TWO PLACE DECIMAL .5
THREE PLACE DECIMAL .05 MATERIAL DESCRIPTION

INTERPRET GEOMETRIC DIM 0.5 SCH 40 PVC 1/2 Inch Telescoping Shower Rod
TOLERANCING PER: ASME Y14.5

PROPRIETARY AND CONFIDENTIAL SIZE PART NO. REV

A N21
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF 0
THE OWNERS. ANY REPRODUCTION
IN PART OR AS A WHOLE WITHOUT THE
WRITTEN PERMISSION IS PROHIBITED.
DO NOT SCALE DRAWING SCALE: 1:10 SHEET 1 OF 1

2 1
 2 1

B B

14.00

NAME DATE
IOWA STATE UNIVERSITY
A A
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN MILLIMETERS DRAWN YOUR NAME 10/16/2020 MECHANICAL ENGINEERING DEPARTMENT
TOLERANCES:
ANGULAR: MACH 1 CHECKED --- --- ME 270 - SECTION 05
TWO PLACE DECIMAL .5
THREE PLACE DECIMAL .05 MATERIAL DESCRIPTION

INTERPRET GEOMETRIC DIM .5 SCH 40 PVC 1/2 Inch Top Support

TOLERANCING PER: ASME Y14.5

PROPRIETARY AND CONFIDENTIAL SIZE PART NO. REV

A N23
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF 0
THE OWNERS. ANY REPRODUCTION
IN PART OR AS A WHOLE WITHOUT THE
WRITTEN PERMISSION IS PROHIBITED.
DO NOT SCALE DRAWING SCALE: 1:5 SHEET 1 OF 1

2 1
 2 1

B B

25.00

NAME DATE
IOWA STATE UNIVERSITY
A A
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN MILLIMETERS DRAWN YOUR NAME 10/16/2020 MECHANICAL ENGINEERING DEPARTMENT
TOLERANCES:
ANGULAR: MACH 1 CHECKED --- --- ME 270 - SECTION 05
TWO PLACE DECIMAL .5
.25 THREE PLACE DECIMAL .05 MATERIAL DESCRIPTION

INTERPRET GEOMETRIC DIM 1 SCH 40 PVC 1 inch PVC Shower Beam

TOLERANCING PER: ASME Y14.5

2.00 PROPRIETARY AND CONFIDENTIAL SIZE PART NO. REV

A N20
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF 0
THE OWNERS. ANY REPRODUCTION
.66 IN PART OR AS A WHOLE WITHOUT THE
WRITTEN PERMISSION IS PROHIBITED.
DO NOT SCALE DRAWING SCALE: 1:10 SHEET 1 OF 1

2 1
 2 1
19 ITEM
NO. PART NUMBER DESCRIPTION QTY.
1 N6 BODY 1
13 3 N7 RING, WELD - C 3
4 N5 RING, MATING-B 1
9 5 N-1005 RING, MATING-A 1
B 6 N12 PISTON 1 B
7 N14 SHAFT 1
11 8 N8 TOP, VALVE 1
12
9 N10 SUPPORT 1
10 10 N11 BRACKET, HINGE 1
3
11 N16 HANDLE 1
4 14 12 AN-0004 BASE, HANDLE 1
13 N15 LINK 2
8 16 14 N9 PIN, EXPANSION 1
15 N13 PIN 2
7 15 16 N17 SPRING PIN 1
3
B18.3.1M - 12 x
6 17 17 1.75 x 20 Hex Screws 6
SHCS -- 20NHX
1 18 AN-5001 Pump funnel/hose 1
19 AN-6001 Shower head 1
3 5

NAME DATE
UNLESS OTHERWISE SPECIFIED: IOWA STATE UNIVERSITY
A DIMENSIONS ARE IN MILLIMETERS
TOLERANCES:
ANGULAR: MACH 1
DRAWN

CHECKED ---
Jacob Cavner 10/14/2020

---
MECHANICAL ENGINEERING DEPARTMENT
ME 270 - SECTION 02
A
TWO PLACE DECIMAL .5
THREE PLACE DECIMAL .05 MATERIAL DESCRIPTION
18 INTERPRET GEOMETRIC
TOLERANCING PER: ASME Y14.5
WATER PUMP
PROPRIETARY AND CONFIDENTIAL SIZE PART NO. REV
A AN-0001
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF 0
THE OWNERS. ANY REPRODUCTION
IN PART OR AS A WHOLE WITHOUT THE
WRITTEN PERMISSION IS PROHIBITED.
DO NOT SCALE DRAWING SCALE: 1:8 SHEET 1 OF 1

2 1
 2 1

ITEM PART NUMBER DESCRIPTION QTY.

NO.
1 N18 Bracket Base 1
2 N19 Handle Thread 1
B B
1

NAME DATE
IOWA STATE UNIVERSITY
A A
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN MILLIMETERS DRAWN Jacob Cavner 10/7/2020 MECHANICAL ENGINEERING DEPARTMENT
TOLERANCES:
ANGULAR: MACH 1 CHECKED --- --- ME 270 - SECTION 02
TWO PLACE DECIMAL .5
THREE PLACE DECIMAL .05 MATERIAL DESCRIPTION
HDPE
INTERPRET GEOMETRIC
TOLERANCING PER: ASME Y14.5
HANDLE BRACKET
PROPRIETARY AND CONFIDENTIAL SIZE PART NO. REV
A AN-0004
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF 0
THE OWNERS. ANY REPRODUCTION
IN PART OR AS A WHOLE WITHOUT THE
WRITTEN PERMISSION IS PROHIBITED.
DO NOT SCALE DRAWING SCALE: 1:1 SHEET 1 OF 1

2 1
 4 3 2 1
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 N-3001 Bottom Plate 1
2 N-3002 Larger Side Plate 2
3 N-3003 Smaller Side Plate 2
4 CR-FHM1 0.06- Flat head screw 16
80x0.625x0.625-N
5 78155T13 McMaster Carr Caster Wheels 4
6 HX-SHCS 0.25- Bottom bolts 16
3 28x0.3125x0.3125-N

B B

6
4

A A
UNLESS OTHERWISE SPECIFIED:
MATERIAL NAME DATE
IOWA STATE UNIVERSITY
PLYWOOD DIMENSIONS ARE IN INCHES DRAWN N MOORE 10/16/2020
TOLERANCES: MECHANICAL ENGINEERING DEPARTMENT
ANGULAR: MACH 1
TWO PLACE DECIMAL .06 CHECKED
THREE PLACE DECIMAL .010
DESCRIPTION
INTERPRET GEOMETRIC
TOLERANCING PER: ASME Y14.5 FULL WAGON ASSEMBLY
PROPRIETARY AND CONFIDENTIAL SIZE PART NO. REV

B AN-3000 0
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
THE OWNERS. ANY REPRODUCTION
IN PART OR AS A WHOLE WITHOUT THE
WRITTEN PERMISSION IS PROHIBITED. DO NOT SCALE DRAWING SCALE: 1:6 VOLUME: SHEET 1 OF 1

4 3 2 1
 4 3 2 1
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 AN-3000 Wagon 1
2 AN-5000 Shower Structure 1
3 AN-2000 Water Stand 1
4 AN-00001 Pump 1
4 5 N1 Storage Tank 1

B B
3

A A
UNLESS OTHERWISE SPECIFIED:
1
NAME DATE
MATERIAL
IOWA STATE UNIVERSITY
DIMENSIONS ARE IN INCHES DRAWN N MOORE 10/16/2020
TOLERANCES: MECHANICAL ENGINEERING DEPARTMENT
ANGULAR: MACH 1
TWO PLACE DECIMAL .06 CHECKED
THREE PLACE DECIMAL .010
DESCRIPTION
INTERPRET GEOMETRIC
TOLERANCING PER: ASME Y14.5 UNIVERSAL SANITATION STATION
PROPRIETARY AND CONFIDENTIAL SIZE PART NO. REV

B AN-6000 0
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
THE OWNERS. ANY REPRODUCTION
IN PART OR AS A WHOLE WITHOUT THE
WRITTEN PERMISSION IS PROHIBITED. DO NOT SCALE DRAWING SCALE:1:16 VOLUME: SHEET 1 OF 1

4 3 2 1
 4 3 2 1
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 N2 WATER STAND BASE AND TOP 2
2 N3 SIDE SUPPORTS 3

3 0 B18.2.3.3M - HEAVY HEX SCREW, 12

M12 X 1.75 X 60 --30N

B B
3

A A
UNLESS OTHERWISE SPECIFIED:
MATERIAL NAME DATE
IOWA STATE UNIVERSITY
OAK DIMENSIONS ARE IN MILLIMETERS DRAWN DANNIA THORPE 10/16/2020
TOLERANCES: MECHANICAL ENGINEERING DEPARTMENT
ANGULAR: MACH 1
TWO PLACE DECIMAL .5 CHECKED
THREE PLACE DECIMAL .05
DESCRIPTION
INTERPRET GEOMETRIC
TOLERANCING PER: ASME Y14.5 WATER BASE ASSEMBLY
PROPRIETARY AND CONFIDENTIAL SIZE PART NO. REV

B AN2000 0
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
THE OWNERS. ANY REPRODUCTION
IN PART OR AS A WHOLE WITHOUT THE
WRITTEN PERMISSION IS PROHIBITED. DO NOT SCALE DRAWING SCALE: 1:15 VOLUME: SHEET 1 OF 1

4 3 2 1
 4 3 2 1

24.000
4X
B 1.000 B

4X 3.000

24.000

6X 0 THRU ALL
0 X 100°

2X
11.000

A A
UNLESS OTHERWISE SPECIFIED:
MATERIAL NAME DATE
IOWA STATE UNIVERSITY
.5 PLYWOOD DIMENSIONS ARE IN MILLIMETERS DRAWN DANNIA THORPE 10/16/2020
TOLERANCES: MECHANICAL ENGINEERING DEPARTMENT
ANGULAR: MACH 1
TWO PLACE DECIMAL .5 CHECKED
THREE PLACE DECIMAL .05
DESCRIPTION
INTERPRET GEOMETRIC
TOLERANCING PER: ASME Y14.5 WATER STAND BASE AND TOP
PROPRIETARY AND CONFIDENTIAL SIZE PART NO. REV

B N2 0
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
THE OWNERS. ANY REPRODUCTION
IN PART OR AS A WHOLE WITHOUT THE
WRITTEN PERMISSION IS PROHIBITED. DO NOT SCALE DRAWING
SCALE:1:8 VOLUME: 287.94 SHEET 1 OF 1

4 3 2 1
 3 7/16"

2 3/8"

For 5/16"
Bolt Size

4 1/8" 3 1/8"
3/32"

3 13/16"
3"

3/32"

7/8" Swivel Offset

1 1/4"

2 3/8"
Swivel Radius
PART
NUMBER 78155T13
http://www.mcmaster.com Cart-Smart
© 2019 McMaster-Carr Supply Company
Information in this drawing is provided for reference only.
Swivel Caster
 2 1

B B

60° 104.00±0.05
112.00±0.05

158.00

M14x1.5 Machine Threads

NAME DATE
IOWA STATE UNIVERSITY
A A
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN MILLIMETERS DRAWN Jacob Cavner 10/7/2020 MECHANICAL ENGINEERING DEPARTMENT
TOLERANCES:
ANGULAR: MACH 1 CHECKED --- --- ME 270 - SECTION 02
TWO PLACE DECIMAL .5
THREE PLACE DECIMAL .05 MATERIAL DESCRIPTION
HDPE 29mm
INTERPRET GEOMETRIC
TOLERANCING PER: ASME Y14.5
RING, MATING-B
PROPRIETARY AND CONFIDENTIAL SIZE PART NO. REV
A N-0005
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF 0
THE OWNERS. ANY REPRODUCTION
IN PART OR AS A WHOLE WITHOUT THE
WRITTEN PERMISSION IS PROHIBITED.
DO NOT SCALE DRAWING SCALE: 1:4 SHEET 1 OF 1

2 1
 2 1

88.00

B B
74.02

70.00
182.00

229.00

NAME DATE
IOWA STATE UNIVERSITY
A A
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN MILLIMETERS DRAWN Jacob Cavner 10/7/2020 MECHANICAL ENGINEERING DEPARTMENT
96.00 TOLERANCES:
ANGULAR: MACH 1 CHECKED --- --- ME 270 - SECTION 02
86.00 TWO PLACE DECIMAL .5
THREE PLACE DECIMAL .05 DESCRIPTION
78.00
MATERIAL
PVC REDUCER TEE
INTERPRET GEOMETRIC
TOLERANCING PER: ASME Y14.5
BASE
PROPRIETARY AND CONFIDENTIAL SIZE PART NO. REV
A N-0006
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF 0
THE OWNERS. ANY REPRODUCTION
IN PART OR AS A WHOLE WITHOUT THE
WRITTEN PERMISSION IS PROHIBITED.
DO NOT SCALE DRAWING SCALE: 1:4 SHEET 1 OF 1

2 1
 2 1

13.00

B 112.00
B
88.00

96.00

NAME DATE
IOWA STATE UNIVERSITY
A A
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN MILLIMETERS DRAWN Jacob Cavner 10/7/2020 MECHANICAL ENGINEERING DEPARTMENT
TOLERANCES:
ANGULAR: MACH 1 CHECKED --- --- ME 270 - SECTION 02
TWO PLACE DECIMAL .5
THREE PLACE DECIMAL .05 MATERIAL DESCRIPTION
RUBBER
INTERPRET GEOMETRIC
TOLERANCING PER: ASME Y14.5
RING, WELD-C
PROPRIETARY AND CONFIDENTIAL SIZE PART NO. REV
A N-0007
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF 0
THE OWNERS. ANY REPRODUCTION
IN PART OR AS A WHOLE WITHOUT THE
WRITTEN PERMISSION IS PROHIBITED.
DO NOT SCALE DRAWING SCALE: 1:2 SHEET 1 OF 1

2 1