PID500 Temperature Controller - PID
Features :
! 4 + 4 Digits, 7 Segment LED Dual Display
! Universal Input
! ON - OFF / PID Control
o
! C / oF Selectable
! Heat Cool PID
! Ramp Soak
! Soft Start
! RS485 Communication MODBUS RTU Protocol
48 x 48mm Certifications :
Display Specifications Functional Specifications
Digits 4 + 4 Digits, 7 Segment LED Dual Display Control Action 1) PID
Height of Upper Display : 10mm 2) ON-OFF
Height of Lower Display : 07mm Proportional Band (P) 0.0 to 400.0o
LED Indications 1 : Main output, 2, 3 : Alarm output, Integral Time (I) 0 to 3600 sec
M : Manual output, T : Tune.
Derivative Time (D) 0 to 200 sec
Cycle Time 0.1 to 100.0 sec
Input Specifications Hysteresis Width 0.1 to 99.9o
Inputs Thermocouple (J, K, T, R, S, C, E, B, N, L, U, W, Manual Reset Value -99.9 to 99.9o
Platinel II), RTD (PT100) Heat Cool PID
Signal inputs (-5 to 56mV, 0 to 10V, Control Action PID / ON-OFF
0 to 20mA DC) (Programmable Scale Type)
o Cycle Time 0.1 to 100 sec
Resolution 1 / 0.1 for TC / RTD only
( Fixed 1° resolution for R & S type TC) Proportional Gain 0.0 to 400.0o
Decimal point position selectable: Deadband Programmable from setpoint low limit to
1 / 0.1 / 0.01 / 0.001 for analog input setpoint high limit
Indication Accuracy For TC inputs : 0.25% of F.S. ±1o Alarms
For R & S type TC inputs : 0.5% of F.S. ±2o Modes Deviation high / low, Absolute high / low, Band,
(20 min of warm up time for TC inputs) sensor Break
For RTD input : 0.1% of F.S. ±1o
For Analog input : ±0.5%, ±1 digit Hysteresis 0.1 to 99.9o
(F.S. = Full Scale) Ramp Soak
o
Temperature Unit C / oF Selectable Ramp Rate 1 to 9999o / hr
Input Filter (FTC) 1 to 99sec, OFF Soak Time 0 to 1440 min
Sampling time 200 ms Soft Start Time 0 to 999 min
Output Specifications Auxiliary Supply Specifications
Control Output ( Optional ) 1 Supply Voltage 90 to 270V AC / DC (50 / 60Hz)
Contact Rating (SPST) 5A @ 230V AC / 30V DC, resistive Power Consumption 5 VA max @ 230V AC
SSR Drive (Voltage Pulse) 18V DC, 20mA
Current 4 to 20mA DC (loop impedence : 500Ω max.) Environmental Specifications
Voltage 0 to 10V DC (load resistance : 10KΩ min.)
Temperature Operating : 0 to 50oC (32 to 122oF)
Auxiliary Output ( Optional ) 2 Storage : -20 to 75oC (-4 to 167oF)
Contact Rating (SPST) 5A @ 230V AC / 30V DC Humidity (non - condensing) 85% RH
SSR Drive 12V DC, 20mA
Retransmission
Mechanical Specifications
Current 4 to 20mA DC
(loop impedance : 500Ω max) Mounting Panel Mount
Voltage 0 to 10V DC (load resistance : 10KΩ min.) Weight 195 gms
Update Rate 100 msec
www.selec.com 1
PID500 Temperature Controller- PID
Optional Specifications Accessories ( Optional )
Standard SELEC accessories that can be used with this product.
SERIAL COMMUNICATION
Adapter plate
Interface standard RS485
1) AP7248 : Plastic adapter plate, used to mount 1 / 16 DIN (cutout size 48 x 48)
Communication address 1 to 99, maximum of 32 units per line Instrument into existing (72 x 72) cutout size.
Transmission mode Half duplex 2) AP9648 : Plastic adapter plate, used to mount 1 / 16 DIN (cutout size 48 x 48)
Transmission protocol MODBUS RTU Instrument into existing (96 x 96) cutout size.
Transmission distance 500 m maximum 3) AP4896-4848-G-C : Plastic adapter plate, used to mount 1 / 16 DIN
(cutout size 48 x 48) Instrument into existing (48 x 96)
Transmission speed 9600, 4800, 2400, 1200, 600, 300 bits / sec
cutout size.
Parity Non, Odd, even, Mark, Space
Stop bits 1 or 2
Mounting Accessories (Supplied with units)
Response Time 100 ms (Max and independent of boud rate)
48 X 48 Collar clamp ACL4802
Dimensions
Compliance
Panel Cutout
Applicable EMI / EMC Standards
Product Standard : IEC 61326-1
45mm
46mm
48mm
Category Standards Compliance
ESD Immunity IEC 61000-4-2 Level III
48mm 100mm 46mm
7mm
+/- 2 kV common mode,
Surge Immunity IEC 61000-4-5
+/- 1 kV differential mode
Terminal Connections Level III, 80 to 1000MHz
Radiated Susceptibility IEC 61000-4-3 Level II, 1.4GHz to 2GHz
Level I, 2GHz to 2.7GHz
L (+) 1
+ 11 6 (-) N Conducted Susceptibility IEC 61000-4-6 Level II
RS485 TC +/RTD1 Dips : 0% residual voltage /
NO2 ANA IP +
+ 2 - 12 7 1 cycle (Criteria B), 40% residual voltage /
SSR2
10 cycles 50Hz / 12 cycles 60Hz
- Voltage Dips and
3 13 8 - IEC 61000-4-11 (Criteria C)70% residual voltage /
COM2 TC /RTD2 Interruptions 25 cycles50Hz / 30 cycles 60Hz
NO3 ANA IP
-
(Criteria C)
0 -10 V/4 -20mA
NO1 + 14
SSR1/ 0-5 V/
+ 4 9 Interruptions : 0% residual voltage /
RTD3
SSR3
250 cycles 50Hz / 300 cycles 60Hz
- 5 - 15 10 (Criteria C)
COM1 COM3 Conducted Emission CISPR-11
Radiated Emission CISPR-11
Cable Size (AWG): 16-13 ; Stud Hole for Lug (inch): 0.137 ; Tightening Torque (Lb-inch): 7
Electrical Fast Transient IEC 61000-4-4 Level III
Cable Size (mm2): 1.5-2.5 ; Stud Hole for Lug (mm): 3.5 ; Tightening Torque (N-m): 0.8
Ordering Information
OUTPUT 3
PRODUCT CODE OUTPUT 1 OUTPUT 2 SUPPLY VOLTAGE CERTIFICATION
RELAY / SSR COMMUNICATION (RS485)
PID500-0-0-01 RELAY RELAY RELAY -- 90-270V AC / DC --
PID500-0-0-01 V2-CE RELAY RELAY RELAY -- 90-270V AC / DC
PID500-0-0-04 RELAY RELAY RELAY YES 90-270V AC / DC --
PID500-0-0-04 V2-CE RELAY RELAY RELAY YES 90-270V AC / DC
PID500-2-0-01 4-20mA RELAY RELAY -- 90-270V AC / DC --
PID500-2-0-01 V2-CE 4-20mA RELAY RELAY -- 90-270V AC / DC
PID500-1-0-01 SSR RELAY RELAY -- 90-270V AC / DC --
PID500-1-0-01 V2-CE SSR RELAY RELAY -- 90-270V AC / DC
PID500-1-0-00 SSR RELAY NA -- 90-270V AC / DC --
PID500-1-0-00 V2-CE SSR RELAY NA -- 90-270V AC / DC
PID500-2-0-04 4-20mA RELAY RELAY YES 90-270V AC / DC --
PID500-2-0-04 V2-CE 4-20mA RELAY RELAY YES 90-270V AC / DC
PID500-3-0-00 0-10V RELAY RELAY -- 90-270V AC / DC --
PID500-3-0-00 V2-CE 0-10V RELAY RELAY -- 90-270V AC / DC
PID500-1-1-05-CU
®
SSR SSR SSR YES 90-270V AC / DC C US
www.selec.com 2
PID500 Temperature Controller- PID
Input Sensor Ranges (For TC / RTD Inputs)
Resolution Ranges
Sensor type 1 0.1
o
C -150 to 850 -150 to 850
PT100
o
F -238 to 1562 -199 to 999
o
C -199 to 750 -199 to 750
J
o
F -328 to 1382 -199 to 999
o
C -199 to 1350 -199 to 999
K
o
F -328 to 2462 -199 to 999
o
C -199 to 400 -199 to 400
T
o
F -328 to 750 -199 to 750
o
C 0 to 1750 N/A
R&S
o
F 32 to 3182 N/A
www.selec.com 3
