Scribd
Upload
217 views1 page

Whipmix 2018OMNICAST

Omni-Cast is an investment powder produced for casting precious metals like gold. It produces high quality castings and has a very smooth surface finish. It can withstand demanding burnout cycles and cast alloys up to 2450°F. Omni-Cast is manufactured using only the finest raw materials at Whipmix's USA facility and is the best investment powder for the jewelry industry.

Uploaded by

Yacquelin Pérez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
217 views1 page

Whipmix 2018OMNICAST

Omni-Cast is an investment powder produced for casting precious metals like gold. It produces high quality castings and has a very smooth surface finish. It can withstand demanding burnout cycles and cast alloys up to 2450°F. Omni-Cast is manufactured using only the finest raw materials at Whipmix's USA facility and is the best investment powder for the jewelry industry.

Uploaded by

Yacquelin Pérez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

The casters choice

FOR THE CASTING OF PRECIOUS METALS INCLUDING HIGH KARAT WHITE & YELLOW GOLD
Omni-Cast has a reputation to be the best investment powder produced for the
• Smooth accurate castings jewelry industry, producing castings of the highest quality and surface finish.
• Consistent results
• Dedicated technical support team Developed at Whipmix’s USA facility, Omni-Cast is manufactured using only
• Accredited to ISO 9001 the finest grades of raw materials. With a very high percentage of cristobalite,
Omni-Cast can cast precious alloys up to 2450°F (1350°C) including Palladium
• Worldwide network of distributors
White Gold. Omnicast can withstand very demanding burnout cycles, including
rapid burnouts.

MIXING INSTRUCTIONS

Vacuum Machine Mixing 38 - 40:100 Minutes Conventional (hand) Mixing 38:100 Minutes
Weigh powder and water 0 Weigh powder and water 0
Add powder to water 0 Add powder to water 0
Vacuum mix 4 Mix 4
Pour investment 2 Vacuum bowl 2
Hold under vacuum 2 Pour investment 1
Total work time 8 Vacuum flasks 2
Total work time 9

BURNOUT PROCEDURE
800
730°C
700

600

150°C/hr
Temperature °C

500

400

300
230°C
200

100

1.5hrs 3hrs 3.5hrs 4hrs 1hr


0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Time in hours

Omni-Cast is packed and available as follows:


- 45 kilo Plastic Drum - 22.5 kilo Polypropylene Sack

www.whipmixjewelryinvestment.com

E-mail: mail@whipmixjewelryinvestment.com Tel: +44 (0) 1782 663600 Fax: +44 (0) 1782 663611

You might also like