0330

2/2 or 3/2-way Solenoid Valve,

with pivoted armature and
isolating diaphragm

• Lockable manual override as standard

• For liquid, gaseous and aggressive media
• Long service life, even in non-lube conditions
• Insensitive to contaminated fluids
• Analysis version available
Type 0330 can be combined with...

Type 2508 Type 1078 Type 2511

Cable plug Timer unit ASI cable plug

The Type 0330 is a direct-acting 2/2 or 3/2-

Technical data
way pivoted armature solenoid valve with a
wide range of circuit functions. The magnetic Port connection G 1/4 (G 1/8, NPT on request)
system and the medium are separated by a Orifice DN 2.0 - 4.0
diaphragm system. The valve is fast-acting Body and seat materials Brass and stainless steel 1.4401
and has a long service life, even in non-lube Coil material Epoxy
conditions. Coil insulation class H
Seal material NBR and FKM (EPDM, FFKM on request)
Circuit functions Media
ô! NBR Neutral media, such as compressed air, water,
A 2/2-way valve NC hydraulic oil
FKM Hot air, oxygen, hot oil, per-solution
ô0
on request EPDM Oil and fat-free media
ô! on request FFKM Hot air, oxygen, hot oil, per-solution
B 2/2-way valve NO Media temperature
ô0 NBR 0 to +80 °C
ô! FKM 0 to +90 °C
C 3/2-way valve NC on request EPDM -30 to +90 °C
0 ô2
on request FFKM +5 to +90 °C
Ambient temperature max. +55 °C (min. temperature see media temp.)
ô"
D 3/2-way valve NO Viscosity max. 37 mm2/s
0 ô2 Operating voltage 24 V DC, 24 V/50 Hz, 230 V/50 Hz
further on request

T 3/2-way valve, Voltage tolerance ±10%
universal function, Duty cycle 100% continuous rating
 
any flow direction Electrical connection Cable plug Type 2508 (DIN EN 175301-803 Form A)
for Ø 7 mm cable (supplied as standard)
Applications Protection class IP 65 with cable plug
Weight [kg] 0.47
Water and gas analysis
Installation As required, preferably with actuator upright
Pharmaceutical industry
Food processing

www.burkert.com p. 1/5
 0330

Technical data, cont.

Power ratings Response times
Orifice Power ratings Orifice Response times
Inrush AC Hold AC (hot coil) Hot/cold coil DC AC DC
[mm] [VA] [VA] [W] [W] [mm] Opening [ms] Closing [ms] Opening [ms] Closing [ms]
2-4 30 15 8 8 / 11 2-4 8-15 8-15 10-20 10-20
Response times [ms]:
Measured at valve outlet at 6 bar and +20 °C
Opening: pressure build-up 0 to 90%, closing: pressure relief 100 to 10%

Materials

Coil: Epoxy

Isolating diaphragm: see ordering chart

O-Ring: see ordering chart

Valve body: Brass, stainless steel 1.4401

p. 2/5
 0330

Ordering chart for valves (other versions on request)

Brass or stainless steel body, seal material NBR or FKM, manual override and cable plug included

Kv value

threaded port

2)
Item no. per voltage/frequency [V/Hz]

Orifice [mm]
connection
water [m3/h] 1), 4)

range [bar]
Pressure
function

material

024/DC

024/50

230/50
Circuit

Seal
Port

DC

AC
A 2/2-way valve NC 3) Brass body
ô! G 1/4 3.0 0.14 0.18 0-10 FKM 020 293 022 883 124 909
NBR 020 294 086 553 024 902
ô0 4.0 0.17 0.23 0-5 FKM 024 019 025 246 124 912
NBR 025 084 – 046 007
Stainless steel body
G 1/4 3.0 0.14 0.18 0-10 FKM 020 292 023 984 024 563
4.0 0.17 0.23 0-5 018 276 018 857 020 873
B 2/2-way valve NO 3) Brass body

ô! G 1/4 3.0 0.14 0.18 0-10 FKM 141 917 130 146 141 919
4.0 0.17 0.23 0-5 141 920 141 921 141 923
ô0 Stainless steel body
G 1/4 3.0 0.14 0.18 0-10 FKM 141 928 141 929 141 931
4.0 0.17 0.23 0–5 141 932 141 933 141 935
C 3/2-way valve NC Brass body
ô! G 1/4 2.0 0.08 0.11 0-16 NBR 041 103 042 129 041 105
3.0 0.14 0.18 0-10 041 107 041 108 041 116
0 ô2 4.0 0.17 0.23 0-5 042 218 042 695 042 329
Stainless steel body
G 1/4 3.0 0.14 0.18 0-10 FKM 052 344 045 024 052 059
4.0 0.17 0.23 0-5 050 483 043 324 050 979
D 3/2-way valve NO Brass body
ô" G 1/4 2.0 0.08 0.11 0-16 NBR 056 984 041 858 041 137
3.0 0.14 0.18 0-10 041 139 041 141 041 147
0 ô2
4.0 0.17 0.23 0-5 043 129 042 696 042 903
T 3/2-way valve, Brass body
universal function, G 1/4 2.0 0.08 0.11 0-12 FKM 124 922 138 316 124 925
any flow direction
3.0 0.14 0.18 0-8 124 927 124 928 124 930
 Stainless steel body
G 1/4 2.0 0.08 0.11 0-12 FKM 124 932 124 933 124 935
  3.0 0.14 0.18 0-8 124 937 124 938 124 940

Vacuum version
C 3/2-way valve NC Brass body
G 1/4 3.0 0.14 0.18 Vac. -6 NBR 043 894 046 815 –
4.0 0.17 0.23 Vac. -3 044 302 – 042 879

D 3/2-way valve NO Brass body

G 1/4 4.0 0.17 0.23 Vac. -3 NBR 052 680 059 646 053 785

1)
Measured at +20 °C, 1 bar2) pressure at valve inlet and free outlet. 2) Pressure data [bar]: Overpressure with respect to atmospheric pressure
3)
The listed Item no. and circuit functions have a valve body with a straight through channel (var. code AF02)
4)
In DC-versions with orifice 3.0 and 4.0 the orifice diameter is reduced by about 0,5mm.

I &URTHERôVERSIONSôONôREQUEST
Approvals Circuit function
Explosion protection (Type 780), ATEX, UL, UR, FM - Ex Div. 1 E (mixing) or F (distributing)
Voltage Port connection
Non-standard voltages NPT, G 1/8
Materials Additional
Seal materials EPDM, FFKM Impulse version, optical or electrical position feedback (type 1060),
further device combinations
p. 3/5
 0330

Technical data – Analysis version

Solenoid valve for higher requirements
Analysis version Media flowing through is not contaminated, for pure
media This version is particularly suitable for switch-
ing from extremely pure gaseous and liquid
Carbon residue threshold < 0.2 mg/dm2 media. All contaminated parts are subjected
Permissable leakage rate 10-4 mbar l/sec to additional purification processes, so that the
Media • neutral / aggressive Media, which do not attack the media is not under any circumstances con-
body and seal material taminated. The assembly takes place under
• technical vacuum cleanroom conditions.
Electrical connection Tag connector acc. to DIN EN 175301-803 A
(previously DIN43650) for cable plug Type 2508 Tightness tested on helium leak detector,
(see accessories) 10-4 mbar I/sec.
Mounting instruction No oil, fat or silicon used whatsoever in mounting

Ordering chart for valves, analysis and vacuum version (other versions on request)
Stainless steel body, seal material FKM or NBR, manual override and without cable plug (see Accessories)
Kv value water Pressure Item no. per voltage/frequency
[m3/h] 1) 4) range [bar]2) [V/Hz]
Circuit function

threaded port

Seal material
Orifice [mm]
connection

024/DC

024/50

230/50
(DC)
Port

DC

AC

Analysis version
A 2/2-way valve NC3) Stainless steel body
! G 1/4 2.0 0.08 0.11 Vac. -10 FKM 137 839 – 137 842
3.0 0.14 0.18 Vac. -6 137 843 – 137 846
0 4.0 0.17 0.23 Vac. -3 122 101 – 137 849
T 3/2-way valve, universal Stainless steel body
function, any flow direction G 1/4 2.0 0.08 0.11 Vac. -8 FKM 137 850 – 137 854

3.0 0.14 0.18 Vac. -5 FKM 137 855 – 137 858
4.0 0.17 0.23 Vac. -3 FKM 137 859 – 137 862
 
1)
Measured at +20 °C, 1 bar2) pressure at valve inlet and free outlet. 2)
Pressure data [bar]: Overpressure with respect to atmospheric pressure
3) 4)
The listed item nos. have a valve body with straight through channel In DC-versions with orifice 3.0 and 4.0 the orifice diameter is reduced by about 0.5mm.

Please note that the cable plug has to be ordered separately, see Accessories on next page and separate datasheet for Type 2508.

Other circuit functions

The valves are fitted with different springs. When used in other circuit functions the permissable operating pressure changes acc. to the following table.
Circuit Max. operating pressure [bar] for valve use in other circuit functions
function
Orifice 2 Orifice 3 Orifice 4
A B C D E F A B C D E F A B C D E F
C 16 1.5 16 1.5 1.5 16 10 1 10 1 1 10 5 0.8 5 0.8 0.8 5
D 4 26 4.5 16 4 4 2.5 10 2.5 10 2 3 2 5 2 5 2 2
T 8 8 10 10 10 8 6 6 6 6 6 6 3 3 3 3 3 3

p. 4/5
 0330

Ordering chart Accessory

Cable plug acc. to DIN EN 175301-803 Form A

Fixing screw

frequency
Voltage /
Circuitry

Item no.
Flat seal

None (standard) 0 - 250 V AC/DC 008 376

The delivery of a cable plug includes the flat
with LED 12 - 24 V AC/DC 008 360
seal and the fixing screw. For other cable
with LED and varistor 12 - 24 V AC/DC 008 367
plug versions acc. to DIN EN 175301-803
with rectifier, LED and varistor 12 - 24 V AC/DC 008 363
Form A (previously DIN 43650), see data-
with LED 200 - 240 V 008 362 sheet Type 2508.
with LED and varistor 200 - 240 V 008 369
further versions see datasheet Type 2508

Dimensions [mm]

Possible body connections

Circuit function 1 2 3
A 1)
P A –
B 1)
A P _
C P A R
D R B P The connections marked with 1, 2 and 3 are labelled in the
drawing according to the circuit function table on the left.
E P1 A P2
1)
The listed Item no. and circuit functions have a valve body with a straight
F A P B through channel (var. code AF02)

2/2-way valve 3/2-way valve



'ô
'ô







 
 

'ô

 


 








To find your nearest Bürkert facility, click on the orange box g www.burkert.com

In case of special application conditions,

please consult for advice. Subject to alteration 1303/8_EU-en_00891622

p. 5/5