97105

3/2-, 5/2- and 5/3 Directional Control Valves

Actuation: Electromagnetic
Indirectly controlled soft seal spool valves
Connection G 1/4 or 1/4 NPT
NAMUR interface
● For single and double operated actuators

● Exhaust air recirculation (3/2 way function)

● Crossover-free switching, switch-over function

guaranteed even with small cross section

● Safety function in the event of power failure provided

by mechanical return spring (monostable design)

● Reversible seal allows 3/2 or 5/2 way function

● Add-on manual override

● Suitable for outdoor installation if equipped with

corresponding solenoid

● Minimal electrical power consumption – therefore

many safety ratings possible, e.g. EEx i

Technical data Ordering example

Medium: 5/2 directional control valve with spring return,
Filtered, lubricated or non-lubricated compressed air, Port size G 1/4, solenoid in protection class
instrument air, nitrogen or other neutral, dry fluids EEx me, 24 V DC,
Actuation: Type: 9710505.4200.024.00
Solenoid operated, indirectly controlled EEx e cable gland M 20x1,5
Mounting position: Type: 0588819
Optional
Nominal diameter: Connectors
ND 6 mm See data sheet 7503364
Port size:
G 1/4, 1/4 NPT female thread 3/2 5/2
Operating pressure:
42 42
2 to 8 bar with internal air supply
Temperatures:
Valve: -40* to +65 °C 513 513
Solenoid: See solenoid table
* With minus temperatures, use conditioned dry air. If installed in the open
5/3
protect all connections against the penetration of moisture! 4 2
Material:
Body
aluminium with surface treatment for rough environmental 513
conditions
condensate test with alternating temperatures in
sulphuric environment,
salt spray test with different sodium chloride
solutions,
tested in ammonia environment,
brass, stainless steel 1.4305

Seals NBR (Perbunan)

Our policy is one of continued research and development. We therefore reserve the right
07/01 to amend, without notice, the specifications given in this document. N/** 5.4.335.01
 97105

3/2, 5/2 and 5/3 directional valves

(3/2 way or 5/2 way function by reversible seal)
Aluminium anodized
Symbol Type Port size Actuation Operating Flow Weight Dimensional
1, 3, (5) 2, 4 pressure (bar) (l/min) (kg) drawing
42 42
14 12 14 12 9710505* G 1/4 Flange Solenoid/Spring 2 ... 8 1300 0,45 M02
513 513 9710515* 1/4 NPT
42 42
14 12 14 12 9711505* G 1/4 Flange Solenoid/Solenoid 2 ... 8 1300 0,65 M03
513 5 13 9711515* 1/4 NPT
4 2 12
14
9712505* G 1/4 Flange Solenoid/Solenoid 2 ... 8 950 0,7 M04
513 9712515* 1/4 NPT mid position APB

3/2 directional valves with NAMUR interface DIN 3845/Nov. 98; Port P and auxiliary power supply in flange surface
Symbol Type Port size Actuation Opeerating Flow Weight Dimensional
1, 2, 3 3 pressure (bar) (l/min) (kg) drawing
3
9710525* Flange G 1/4 Solenoid/Spring 2 ... 8 1300 0,9 M01
12 10

12 3 1 2

Brass
Symbol Type Port size Actuation Operating Flow Weight Dimensional
1, 3, (5) 2, 4 pressure (bar) (l/min) (kg) drawing
42 42
14 12 14 12 9710605* G 1/4 Flange Solenoid/Spring 2 ... 8 1300 0,45 M02
513 513 9710615* 1/4 NPT
42 42
14 12 14 12 9711605* G 1/4 Flange Solenoid/Solenoid 2 ... 8 1300 0,65 M03
513 5 13 9711615* 1/4 NPT
4 2 12
14
9712605* G 1/4 Flange Solenoid/Solenoid 2 ... 8 950 0,7 M04
513
9712615* 1/4 NPT mid position APB

3/2 directional valves with NAMUR interface DIN 3845/Nov. 98; Port P and auxiliary power supply in flange surface

Symbol Type Port size Actuation Opeerating Flow Weight Dimensional

1, 2, 3 3 pressure (bar) (l/min) (kg) drawing
3
9710625* Flange G 1/4 Solenoid/Spring 2 ... 8 1300 0,9 M01
12 10

12 3 1 2

Stainless steel
Symbol Type Port size Actuation Operating Flow Weight Dimensional
1, 3, (5) 2, 4 pressure (bar) (l/min) (kg) drawing
42 42
14 12 14 12 9710705* G 1/4 Flange Solenoid/Spring 2 ... 8 1300 0,45 M02

513 513 9710715* 1/4 NPT

42 42
14 12 14 12 9711705* G 1/4 Flange Solenoid/Solenoid 2 ... 8 1300 0,65 M03
513 5 13 9711715* 1/4 NPT
4 2 12
14
9712705* G 1/4 Flange Solenoid/Solenoid 2 ... 8 950 0,7 M04
513 9712715* 1/4 NPT mid position APB

3/2 directional valves with NAMUR interface DIN 3845/Nov. 98; Port P and auxiliary power supply in flange surface

Symbol Type Port size Actuation Opeerating Flow Weight Dimensional

1, 2, 3 3 pressure (bar) (l/min) (kg) drawing
3
9710725* Flange G 1/4 Solenoid/Spring 2 ... 8 1300 0,9 M01
12 10

12 3 1 2

*When ordering please indicate solenoid, voltage and current type (frequency)
Valve function: APB = All Ports Blocked

N/** 5.4.335.02 Our policy is one of continued research and development. We therefore reserve the right
to amend, without notice, the specifications given in this document. 07/01
 97105

Actuation solenoids
Type Current draw Rated current at Protection class Temperature Weight Dimensional Circuit
24V DC 230V AC 24V DC 230V AC Fluid max. Ambience drawing diagram
(W) (VA) (mA) (mA) (°C) (°C) (kg)

02534) 1,6 - 67 - IP00 w/o connector +80 -25 ... +60 0,14 M09 SB01
IP65 with connector
DIN 43650 Form A

07634) 1,9 - 78 - IP00 w/o connector +80 -25 ... +60 0,3 M10 SB01
IP65 with connector
DIN 43650 Form A
0278 3,2 - 135 - SB04
EEx m II T4 1) +70 -20 ... +70 0,4 M11
with cable 3 m SB07
0279 - 3,5 - 15

-20 ... +80 (T5)

42005) 0,7 - 26 - EEx me II T5/T6 2) 0,85 M14 SB04
-40 ... +70 (T6)

-20 ... +80 (T5)

42015) - 1,3 - 24 EEx me II T5/T6 2) 0,85 M14 SB07
-40 ... +60 (T6)

3720 1,4 - 59 - NEMA +60 0,4 M15 SB01

4, 4X, 6, 6P, 7, 9 3)
stranded wire
460 mm long

Standard voltages 24V DC, 230V AC. Other voltages on request.

Design acc. to VDE 0580, EN 50014/50028. 100% duty cycle.
1) Certificate of Conformity KEMA No. Ex-93.C.8283 X 4) Required connector for DC: Type 0570275.
2) Category II2G, EC Type Examin. Certificate KEMA 98 ATEX 4452X Connector with rectifier for AC or universal current: Type 0663303
3) CSA-LR 57643-6, FM approved, for hazardous locations: 5) Cable gland is not included in delivery
Div. 1 and 2, Class I, II,III

Solenoid actuators for intrinsically-safe circuits, protection class EEx ia IIC T6** zone 1 and 2
Type Nominal resist. Min. required Resistance Required voltage Ambient Max. Fluid- Weight Dimensional Circuit
RV Coil switching current Rw 65 Coil* at terminal temperature temperature drawing diagram
(Ω) (mA) (Ω) Rw 65 (°C) (°C) (kg)
2030 124 43 150 6,4
2031 159 38 193 7,3
2032 198 34 240 8,2
2033 248 30 301 9,0
2034 306 27 371 10,0 -40 ... +65 +65 0,83 M12 SB10
2035 378 25 458 11,5
2036 467 23 566 13,0
2037 566 21 686 14,4
2038 692 19 839 15,9

When selecting an intrinsically safe power supply, the permissible maximum values according to the Certificate of Conformity PTB No. Ex-
95.D.2178 should be taken into account. On the other hand, the low effective inductivity and capacity can be ignored.

Solenoid actuators with FM-approval

Intrinsically safe: IS/I, II, III/1/ABCDEFG/ T6 Ta = 65 °C; I/0 AEx ia IIC/ T6 Ta = 65 °C - 0588672/B; Entity
Nonincendive: NI/I/2/ABCD/ T6 Ta = 65 °C; S/II,III/2/FG/T6 Ta = 65 °C; NEMA Type 4
Type Nominal resist. Min. required Resistance Required voltage Ambient Max. Fluid- Weight Dimensional Circuit
RV Coil switching current Rw 65 Coil* at terminal temperature temperature drawing diagram
(Ω) (mA) (Ω) Rw 65 (°C) (°C) (kg)
2040 124 43 150 6,4
2041 159 38 193 7,3
2042 198 34 240 8,2
2043 248 30 301 9,0
2044 306 27 371 10,0 -40 to +65 +65 0,83 M13 SB10
2045 378 25 458 11,5
2046 467 23 566 13,0
2047 566 21 686 14,4
2048 692 19 839 15,9

When selecting an intrinsically safe power supply, the permissible maximum values according to the FM-approval should be taken into account. On
the other hand, the low effective inductivity and capacity can be ignored.

* RW 65 is the solenoid coil resistance at an ambient temperature of +65°C, including internal heat generation, with max. permissible power.
** Certificate of Conformity PTB No. Ex-95.D.2178

Our policy is one of continued research and development. We therefore reserve the right
07/01 to amend, without notice, the specifications given in this document. N/** 5.4.335.03
 97105

3/2, 5/2 and 5/3 directional valves with pilot 50 mW / 5 mW

(3/2 way or 5/2 way function by reversible seal)
Symbol Type Port size Actuation Material Operating Flow Weight Dimensional
1, 3, (5) 2, 4 pressure (bar) (l/min) (kg) drawing
42 42
14 12 14 12 9710509 G 1/4 Flange Solenoid/Spring Aluminium 2 ... 8 1300 0,45 M06
513 513 9710519 1/4 NPT
42 42
14 12 14 12 9711509 G 1/4 Flange Solenoid/Solenoid Aluminium 2 ... 8 1300 0,65 M07

513 5 13 9711519 1/4 NPT

4 2 12
14 9712509 G 1/4 Flange Solenoid/Solenoid Aluminium 2 ... 8 950 0,7 M08
9712519 1/4 NPT mid position APB
513

3/2 directional valves with NAMUR interface DIN 3845/Nov. 98; Port P and auxiliary power supply in flange surface
Symbol Type Port size Actuation Material Operating Flow Weight Dimensional
1, 3, (5) 2, 4 pressure (bar) (l/min) (kg) drawing
3
9710529 G 1/4 Flange Solenoid/Spring Aluminium 2 ... 8 1300 0,425 M05
12 10

12 3 1 2

Ordering example * Please insert code for electrical connection:

9710509. 2080. 001. 00 001 Pg 9
Valve Pilot 5 mW Electr. connection – 002 Pg 11
003 M 12 x 1,5
004 Round connector
005 M 16 x 1,5
Pilot system
Type Rated power Voltage at Rated current Rated current Resistance Max. values EEx i Type of Ambient Circuit
terminal coil Ui Ii Pi protection # temperature diagram
PN UN Ion Ioff RN No.

28 V 120 mA 0,75 W
EEx ia IIC T4 -40 ... +65 °C
2080 5 mW ≥5V ≥ 1 mA ≤ 0,1 mA 5100 Ω 25,2 V 155 mA 0,75 W SB10
EEx ia IIC T6 -40 ... +45 °C
22 V 224 mA 0,75 W

28 V 120 mA 0,75 W
EEx ia IIC T4 -40 ... +65 °C
2081 50 mW ≥ 10 V ≥ 2,7 mA ≤ 1,3 mA 3700 Ω 25,2 V 155 mA 0,75 W SB10
EEx ia IIC T6 -40 ... +45 °C
22 V 224 mA 0,75 W

# Category 2IIG, EC Type Examination Certificate No. PTB 00 ATEX 2050

32
NAMUR interface Manual overrides
Thread M5x8
Not lockable Lockable
24

Type 0553886 Type 0553887

Coding stud
M5x10 DIN 913-45 H
12
8

M5
2

G 1 /4
DIN/ISO 228/1
Accessories
Designation Type Application Weight Ref.
(kg) Data Sheet
Manual override 0553886 Add-on manual override, not lockable
Manual override 0553887 Add-on manual override, lockable
Flange plate 0559857 Direct attachment to pneumatic linear actuators with NAMUR ribbing and for wall mounting, depending on the tubing position 0,49 7502242.06
Yoke 0540593 In conjunction with a flange plate for attachment to pneumatic linear actuators with NAMUR pillar (round) 0,10
Silencer 0014600 Pressure connection G1/4. Maximum back pressure = 6 bar. 0,01 7501080.06
Cable gland 0588819 For solenoid 42XX, M20x1,5, Protection class EEx e (ATEX), Material: nickel plated brass
Flow regulator 0611746 For outdoor use

N/** 5.4.335.04 Our policy is one of continued research and development. We therefore reserve the right
to amend, without notice, the specifications given in this document. 07/01
 97105

General dimensions valves

M01 92.8 M02 116

51.5 67

3.5
3.5
35.1 43
3 5 1 3

45
32
45
32

4.35
36.6 4
47.1
57.6
59.1

105.5
101

33 22 22

27.5
27.5
21.8

13.8
13.8

4.3

4.8
3.3

110.8 43 4.3
134

M03 204
M04
222
3.5

3.5
3 1 5 3 1 5
45
27.5

45
27.5
32

32
3.4

3.4

71.5 89.3
95.5 113.3
105.5

105.5
46

46
27.5

27.5
13.8

13.8

61.5
4.8

79
4.8

83.5 4.3
101 4.3
105.5
123
162.2
180

Our policy is one of continued research and development. We therefore reserve the right
07/01 to amend, without notice, the specifications given in this document. N/** 5.4.335.05
 97105

M05
001
82.6
59.8 101 Pg9
24

30
002

Pg11 27
3

109

94

24
003

51.5
47

35.1
32 13

3 45
14
004
22
28
17.5

M06 89.5

67 101
001
Pg9
24

4.35 002

3 Pg11 27
132

22
117

2
24

1
4 003
22

5
43

43

32 13
33

4.8 45
004
13.8

27.5
17.5

M07 89.6
67 101

001
30

Pg9
24

27.5 45
4.35
002
5
22

2 Pg11 27
24

1.2

1
163

4
22

3 003
35
35

4.8
25

32
13.8
13
9

004

17.5

N/** 5.4.335.06 Our policy is one of continued research and development. We therefore reserve the right
to amend, without notice, the specifications given in this document. 07/01
 97105

M08 89.6
67 101

001

30
Pg9
24

27.5 45
4.35
002
5

22
2 Pg11 27

24

1.2
1

180.8
4

22
120.8
3 003

35
35
4.8

25
32
13.8
13

9 17.8
004

17.5

General dimensions solenoids

M09 M10 M11
74 53,5

38 49
15,5

17
40,5
40,5

41
56
55

Connector can be 82,5

Connector can be indexed by 4 x 90°
indexed by 4 x 90° 12 Pg 11 12 89

Pg 11
27,5
34
29,5

43
27,5

33

18 27 19,5
89 63,5
73

M12 M13
6
6

41
60
41
60

97,5
80

Ø16*
Ø16*
* Ø13 (with spacer tube)
* Ø13 (with spacer tube)
1/2-14 NPT
63 33
Pg 13,5
119 63 33
119
62
66

62
66

Our policy is one of continued research and development. We therefore reserve the right
07/01 to amend, without notice, the specifications given in this document. N/** 5.4.335.07
 97105

General dimensions solenoids

M14 M15
107 1/2 - 14 NPT

40,5
40,5
64,5

Ø16*
* Ø13 (with spacer tube)
91,5

ø 13
84

27 63 2

M 20 x 1,5 42

33,5
43
Stranded wire AWG 18
26 (appr. 460 mm length)
54,5

Circuit diagrams

SB01 SB02 SB04

SB05 SB06 SB07

SB08 SB10 SB13

Warning
These products are intended for use in industrial compressed air systems only. Do not all component parts used in fluid power systems and to provide adequate safeguards
use these products where pressures and temperatures can exceed those listed under to prevent personal injury or damage to equipment in the event of such failure.
‘Technical Data’. System designers must provide a warning to end users in the system
Before using these products with fluids other than those specified, for non-industrial instructional manual if protection against a failure mode cannot be adequately
applications, life-support systems, or other applications not within published provided.
specifications, consult NORGREN. System designers and end users are cautioned to review specific warnings found in
Through misuse, age, or malfunction, components used in fluid power systems can instruction sheets packed and shipped with these products where applicable.
fail in various modes. The system designer is warned to consider the failure modes of

N/** 5.4.335.08 Our policy is one of continued research and development. We therefore reserve the right
to amend, without notice, the specifications given in this document. 07/01