R

C-1540
C-1540RS
C-1550

CONE
CRUSHERS

TM
C-1540
The Terex Finlay C-1540 tracked mobile cone crusher Powerunit
Tier 3 / Stage 3A - CAT C9 Acert 261kW (350hp)
has a proven pedigree in aggregate and ore surface
Tier 4i: Scania DC9 70A 257kW (350hp)
mining applications. This efficient and productive
Hydrostatic transmission
machine incorporates the proven Terex® 1000 Electronic control system
cone crusher with direct variable hydrostatic drive,
automatic tramp relief and hydraulic closed side
setting (CSS) adjustment.

The Terex Finlay C-1540 can be fitted with an optional

patented pre-screen module which allows fines
materials to bypass prior to being fed to the crushing
chamber offering better wear rates in the crushing
chamber. The large hopper/feeder has an automated
metal detection and a purge system to protect the
cone and reduce downtime by removing metal Main conveyor
contaminants via the purge chute. Standard discharge height: 3.3m (10’ 10”)
Belt: 900mm (36”)
Additional benefits include, rapid set up time, ease
of maintenance, high reduction ratio, high output
capacity and advanced electronic control system.

STANDARD FEATURES Features:

Engine: Direct hydrostatic cone drive with variable speed control gives
Tier 3 / Stage 3A - CAT C9 Acert 261kW (350hp) efficient production and application versatility.

Tier 4i / Stage 3B - Scania DC9 70A 257kW (350hp) Optional pre-screen module maximises production and
reduces wear on the chamber by removing fine material
Hopper / Feeder: before it enters the cone.
Hopper capacity: 5m³ (6.5yd³)
Metal detection system on feed belt with ‘auto-stop’ protects
Belt width: 1050mm (42”) the cone from tramp metal and the purge system removes
contaminants from the machine.
Metal detector
Metal contaminants purge system
Wear resistant liner plates

Cone:
Terex 1000 Cone chamber, 1000mm (40”) head diameter
Long throw eccentric, medium coarse concave (max feed size
160mm)
Hydrostatic cone drive

Main Conveyor:
Belt width: 900mm (36”)
High spec scraper at head drum
Wear resistant liners at crusher discharge point
Dust Covers

General:
Galvanised catwalk c/w handrail, kick board and access ladders
Heavy duty track unit, sprocket centres 3.8m (12.8’), pad width
500mm (20”)
Hand held track control set with connection lead
Single speed tracking
Safety guards in compliance to machinery directive
Two auxiliary drives
Emergency stops
Piped for dust suppression c/w spraybars

R
 Pre-screen system (optional)
Single deck screen: 1830mm x 1220mm (6’x 4’)
Plain belt transfer conveyor: 1000mm (40”)

Hopper / Feeder
Hopper capacity: 5m³ (6.5yd³)
Belt: 1050mm (42”)
Metal detection system

Fines chute

Cone chamber
Head diameter: 1000mm (40”)
Direct hydrostatic drive Tracks
Sprocket centres: 3.8m (12’ 6”)
Metal purge chute
Shoe width: 500mm (20”)

Transport Dimensions
16.9m (55’ 5”) 2.8m (9’1”)

3.45m (11 ‘4”)

Working Dimensions

15.79m (51’10”) 3.77m (12’4”)

4,75m (15 ‘7”)

Maximum Plant Capacity: Tph** Stph**

260 287
**Material is based on Limestone with bulk density 1.6T/m3. Where available optional Pre-screen is used.
Maximum capacity uses optimal mesh sizes and material conditions.
Machine Weight: TM
36,500Kg (80,469lbs) without options
38,300Kg (84,437lbs) with optional pre-screen
C-1540RS
The Terex Finlay C-1540RS tracked mobile cone crusher provides the versatility of a crushing and screening
plant on one machine in aggregate and ore surface mining applications. Based on the proven and tested
Terex Finlay C-1540 cone crusher, this machine variant features an innovative on-board recirculating system
and detachable sizing screen. If recirculation and sizing of materials is not required the sizing screen can be
quickly detached from the machine without the need for lifting equipment.

The Terex Finlay C-1540RS can be fitted with an optional patented pre-screen module which allows fines
materials to be removed prior to being fed to the crushing chamber offering higher production with lowest
cost per ton wear and running costs. The large hopper/feeder has an automated metal detection and a purge
system to protect the cone and reduce downtime by removing metal contaminants from the feed belt.

STANDARD FEATURES Hopper / Feeder

Engine: Hopper capacity: 5m³ (6.5yd³)

Tier 3 / Stage 3A: CAT C13 Acert 328kW (440hp) Belt: 1050mm (42”)
Metal detector system
Tier 4i / Stage 3B: Scania DC13 70A 331kW (450hp)
Hopper / Feeder:
Hopper capacity: 5m³ (6.5yd³)

Belt width: 1050mm (42”)

Metal detector
Metal contaminants purge system
Wear resistant liner plates

Cone: Features:
Terex 1000 Cone chamber, Head diameter: 1000mm (40”) Detachable 3.66m x 1.52m (12’ x 5’) double
deck sizing screen passes oversize material back to the
Long throw eccentric, medium coarse concave (max feed size crusher via the on-board recirculating conveyor.
160mm (6”)
Hydrostatic cone drive Quick and easy detachable screen and fines conveyor for
open circuit crushing.
Main Belt:
Belt width: 900mm (36”) The optional stacking conveyor in conjunction with the
optional lower deck screen, produces a 2nd spec’d product.
High spec scraper at head drum
Wear resistant liners at crusher discharge point
Dust Covers

Re-Circulating System:
Two deck screen: 3.66m x 1.52m (12’ x 5’)
Top deck mesh fitted to screen - 40mm aperture fitted unless
specified otherwise
Oversize transfer conveyor, re-circulating conveyor and fines
conveyor fitted as standard
Quick detach screen and fines conveyor
Note:- Middle grade transfer conveyor is not fitted, this is only an
option
General:
Galvanised catwalk c/w handrail, kick board and access ladders
Heavy duty track unit, sprocket centres 3.8m (12.8’), pad width
500mm (20”)
Hand held track control set with connection lead
Single speed tracking
Safety guards in compliance to machinery directive
One auxiliary drive
Emergency stops
Piped for dust suppression c/w spraybars
High specification oil cooler
Piped for dust suppression c/w spraybars
High specification oil cooler

R
 Fines conveyor
Standard discharge height: 3.0m (9’ 10”)
Belt: 1400mm (55”)
Powerunit
Pre-screen system (optional) Tier 3 / Stage 3A: CAT C13 Acert 328kW (440hp)
Single deck screen: 1830mm x 1220mm (6’x 4’) Tier 4i / Stage 3B: Scania DC13 70A 331kW (450hp)
Plain belt transfer conveyor: 1000mm (40”) Hydrostatic transmission
Electronic control system
Catwalk access
Metal detector

Screenbox
Top deck: 3.66m x 1.52m (12’ x 5’)
Bottom deck: 3m x 1. 52m (10’ x 5’)

Oversize transfer conveyor

Belt: 500mm (20”)

Recirculation conveyor
Folds for transport
Chevron belt: 500mm (20”)

Cone chamber
Head diameter: 1000mm (40”) Tracks
Direct hydrostatic drive Sprocket centres: 3.8m (12’ 6”)
Shoe width: 500mm (20”)

Transport Dimensions

18.76m (61’ 7”) 3.1m (10’ 2” )

3.5m (11’ 6”)

Working Dimensions
19m (62’ 4”) 4.7m (15’ 5”)
4.75m (15’ 7”)

Maximum Plant Capacity: Tph** Stph**

260 287
**Material is based on Limestone with bulk density 1.6T/m3. Where available optional Pre-screen is used.
Maximum capacity uses optimal mesh sizes and material conditions.
Machine Weight: TM

43,800kg (96,563lbs) Without options

45,600kg (100,531lbs) With optional pre-screen
49,000kg (108,027lbs) With optional pre-screen,
mid-grade transfer & mid-grade stockpiling conveyor
C-1550
The Terex Finlay C-1550 incorporates the proven Terex 1300 cone
crusher driven through by direct drive. The machine features an
patent pending optional pre-screen module with a single deck
2.45m x 1.52m (8’ x 5’) screen for removal or bypass of fines
from the feed material. The integrated chute system, below the
pre-screen, allows the fines material to be discharged from the
machine using the optional by-pass conveyor or reintroduced
onto the main product conveyor. Both methods improve the Main conveyor
overall plant throughput capacity, product flexibility and liner Standard discharge height: 3.8m (12’6”)
wear reduction. The cone features variable speed drive, hydraulic Plain belt: 1200mm (47”)
tramp relief system and ability to change closed side setting Hydraulically folding for transport
while crushing. The large hopper/feeder has an automated metal Stockpile sensor
detection and a purge system to protect the cone and reduce
downtime by removing metal contaminants via the purge chute.

The hydraulically adjustable feed conveyor allows the machine

to be operated using either the innovative pre-screen system or
if required by feeding directly into the cone.

STANDARD FEATURES
Engine:
Caterpillar C15 390kW (522hp) (Engines are available to meet both
US EPA emission standards, under CFR 1039.625 and EU flexibility
Features:
provisions of Directive 97/68/EC) Fully Hydraulic CSS Adjustment with electronic monitoring system
ensures ease of operation.
Hopper / Feeder:
Fuel efficient direct drive transmission through wet clutch.
Hopper Capacity: 8m³ (10.4yd³)

1200mm (47”) wide belt Hydraulic Tramp Relief System with automatic reset protects the
chamber and minimises downtime.
Metal detector
Metal detection system on feed belt with ‘auto-stop’ protects the
Metal contaminants purge system
cone from tramp metal and the controllable purge system removes
Wear resistant liner plates metal contaminants via the purge chute.

Cone:
Terex 1300 Cone chamber, 1300mm (51”) head diameter
Standard liner configuration (max feed size 220mm)
Direct cone drive via wet clutch.

Main Conveyor:
1200mm (47”) wide belt
High spec scraper at head drum
Wear resistant liners at crusher discharge point
Dust Covers
Stockpile sensor
General:
Galvanised catwalk c/w handrail, kick board and access ladders
Heavy duty track unit, sprocket centres 3.8m (12.8’), pad width
500mm (20”)
Hand held tracking control with connection lead
Two speed tracking
Safety guards in compliance to machinery directive
Two auxiliary drives
Emergency stops
Piped for dust suppression c/w spraybars
Electric pump refuelling kit

R
 Hopper / Feeder
Hopper capacity: 8m3 (10.4yd³)
By-pass conveyor (optional) Belt: 1200mm
Lined hopper walls
Standard discharge height: 2.8mm (9’)
Pre-screen system (optional) High Spec Metal Detector - Standard
Plain belt: 650mm (25.6”)
Single deck screen: 2.45m x 1.52m (8’ x 5’) Optional hydraulically folding
Hydraulically folding Plain belt transfer conveyor: 1200mm (47”) hopper extensions: 10m3 (13yd3)
Hydraulically folding
Powerunit
Caterpillar C15 390kW (522hp)
Direct drive through wet clutch
Catwalk access on 3 sides
Centralized hydraulic controls
Large capacity diesel tank

Catwalks
Fully galvanised
catwalks & steps

Metal purge system

Metal purge chute standard

Tracks / Chassis Cone chamber

Controls Track pads: 500mm (20”) Terex 1300 Cone Crusher
Full CANBUS controlled system Sprocket centers: 4.2m (13.8’) Fully hydraulic CSS adjustment
Bolt on tracks Hydraulic tramp relief system
Heavy duty Web & Flange chassis

Transport Dimensions
18.30m (60’) 3.0m (9’10”)

3.80m (12’ 6”)

Working Dimensions
7.1m (23’ 4”)

19.0m (62’ 4”) 4.2m (13’ 9”)

5.6m (18’ 8”)

Maximum Plant Capacity: Tph** Stph**

390 430
**Material is based on Limestone with bulk density 1.6T/m3. Where available optional Pre-screen is used.
Maximum capacity uses optimal mesh sizes and material conditions.
Machine Weight: TM
64,500kg (142,198lbs) with optional pre-screen
66,000kg (145,505lbs) with optional pre-screen
& side conveyor
Follow us on:

www.terexfinlay.com

Effective January 2012. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only.
Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise
act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex GB
Ltd. makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and/or its subsidiaries in the USA and
other countries. All rights are reserved. Terex® is a registered trademark of Terex Corporation in the USA and many other countries. Copyright 2010 Terex GB Ltd.

TM