Product Data Sheet
Performance in Motion
HYDRAULIC OIL Sinopec Antiwear Hydraulic Oil ISO VG 68 is a premium light
weight paraffinic based hydraulic oil, ideal for industrial or equip-
ISO Grade 68 ment applications. Heavier viscosity ideal for warm climates. It is
Sinopec L-HM AW Hydraulic 68 a rust and oxidation (R&O)-inhibited oil with the added benefit of an
Pack Size: 55 Gallon Drum antiwear additive package for protection. Approved for industrial
applications requiring an ISO VG 68.
Shipping Weight: 485 lbs.
Dimentions: 23”x23”x35”
APPLICATIONS FEATURES AND BENEFITS
• Applications in a wide variety of industrial, marine and mobile • Excellent extreme pressure and antiwear performance protects
equipment. gears operating at high speeds and tooth pressures from abrasion,
• Vane and gear pumps operating under high loads, as recom- wear and welding, even in severe high-load and shock-loading
mended by pump manufacturers. conditions, extending component life.
• Severe service hydraulic systems, employing axial and radial pis- • Excellent thermal and oxidation stability minimize the build up of
ton pumps, as recommended by pump manufacturers. deposits and varnish, reducing wear,
extending component life and ensuring longer oil life.
• Protection against corrosion and rusting extends equipment life,
and reduces maintenance costs.
• Good low-temperature fluidity ensures optimum lubrication, even
in cold start-up conditions, and prevents start-up wear.
• Good anti-foaming properties ensure optimum oil film thickness;
protecting components against wear, and minimize oil leakage.
• Extended oil performance allow for maximum mileage between
drain intervals.
• Multi-grade oils can be used over a wider temperature range,
and so can reduce the need for seasonal oil change thus reducing
maintenance costs.
• Fully compatible with common seal materials, to extend seal life
and prevent fluid leakage.
TYPICAL DATA
ISO Viscosity Grade 68
Kinematic viscosity, ASTM D 445
cSt @ 40°C 68.16
cSt @100°C 15.16 8.83
Viscosity index, ASTM D 2270 103
Air release at 50°C, mins, ASTM D 3427 8
Foaming characteristics, sequences 1, 2 & 3 15/0
ASTM D 892 10/0
15/0
Neutralisation number, mg KOH/g, ASTM D 974 0.71
FZG test (A/8.3/90),fail load stage, DIN 51345 12
Rust prevention, ASTM D 665
distilled water PASS
synthetic sea water PASS
Copper corrosion, 3 hours @ 121°C, ASTM D 130 1B
Water separability, ASTM D 2711 13 (54°C)
Pour point, °C, ASTM D 97 -14
Flash point (COC), °C, ASTM D 92 234
page 1
The information contained herein is subject to change without notification due to continuing
research & development therefore properties may be subject to slight variations.
OEM & INDUSTRY SPECIFICATIONS
DIN 51524 Pt 2
ISO 11158 (L-HM)
Cincinnati Lamb P-69 (ISO 68)
Parker Denison HF-2 (ISO 68)
ACCURACY OF INFORMATION
Data provided in this PDS is typical and subject to change as a result of continuing product research and development. The information
given was correct at the time of printing. The typical values given are subject to variations in the testing procedures and the manufac-
turing process may also result in slight variations. Sinopec guarantees that its lubricants meet any industry and OEM specifications
referred to on this data sheet. Sinopec cannot be held responsible for any deterioration in the product due to incorrect storage or han-
dling. Information on best practice is available from your local distributor.
PRODUCT AND ENVIRONMENTAL SAFETY
This product should not cause any health problems when used in the applications suggested and when the guidance provided in the
Material Safety Data Sheet (MSDS) is followed. Please consult the MSDS for more detailed advice on handling; MSDSs are available
from your local distributor. Do not use the product in applications other than those suggested. As with all products, please take care to
avoid environmental contamination when disposing of this product. Used oil should be sent for reclamation/recycling or, if not possible,
must be disposed of according to relevant government/authority regulations.
FURTHER INFORMATION
RED DRUM TRADING, INC.
email: info@reddrums.com
phone: (844) 730-4040
www.reddrums.com
page 2
Performance in Motion The information contained herein is subject to change without notification due to continuing
research & development therefore properties may be subject to slight variations.
