SAVSOL HY FLUID HAFE SERIES

DESCRIPTION:
SAVSOL HY FLUID HAFE Series Oils are high performance High Viscosity Index, Ashless and Fuel
Efficient Hydraulic Oils for modern Hydraulic systems. Savsol Hy Fluid HAFE oils are blended from
highly refined hydro treated high viscosity index base oils along with Premium Ashless Hydraulic
Technology with the environment in mind. It provides excellent protection to hydraulic systems against
wear, corrosion, rust, oxidation and foaming.

APPLICATION:

SAVSOL HY FLUID HAFE Series Hydraulic Oils can be used in all new technology hydraulic equipment’s
to reduce the fuel consumption and hence increase the productivity. Recommended for use in hydraulic
systems wherein the power and controls systems are subjected to extreme ambient temperatures. Also
best suitable for high precision hydraulic operations where longer drain intervals & wet filterability is
desired in more water prone areas. SAVSOL Hy Fluid HAFE series available in ISO 32, 46, 68 & 100
Viscosity Grades.

SPECIFICATIONS & APPROVALS:

SAVSOL HY FLUID HAFE Series Hydraulic Oils meet the following performance specification
requirements:
 DIN 51524 Part III, II & I  ISO 11158 (HV & HM)
 Parker (formerly Denison) HF-0, HF-1, HF-2  Cincinnati MAG P-68 (VG 32),
(HV/HM) P-69 (VG 68) & P-70 (VG 46)
 SAE MS 1004 Type H Hydraulic Oil Specifications  GM LS-2
(HV Anti-wear & Viscosity Improver)  Bosch Rexroth RE 90220
 AGMA 9005-E02 Anti-wear  Eaton Vickers 35VQ25

ADVANTAGES:

SAVSOL HY FLUID HAFE Series Hydraulic Oils offer the following advantages:
 Excellent Oxidation & Thermal Stability results to extended oil drain interval.
 Very good sludge & particulate control.
 Improved filterability and consequently less downtime.
 Superior Wear protection – Delivering maximized equipment life and reduced maintenance
cost.
 No compatibility issues – Compatible with other Zinc based and other Ashless hydraulic fluids.
 Excellent hydrolytic stability.
 Long Oil and filter life and ensuring unsurpassed equipment protection.
 SAVSOL HY FLUID HAFE SERIES

TECHNICAL SPECIFICATIONS: SAVSOL HY FLUID HAFE SERIES

TYPICAL VALUES
ASTM TEST
PROPERTIES HAFE HAFE HAFE HAFE
METHOD
32 46 68 100
Appearance Visual Clear & Bright
Colour ASTM D1500 L0.5 L0.5 L0.5 L0.5
Density @ 29.5 ⁰C, gm/cm3 D1298 0.8350 0.8472 0.8490 0.8560
Kinematic Viscosity @ 40⁰C,
D445 31.38 47.50 66.87 102.3
cSt
Kinematic Viscosity @
D445 6.893 9.456 11.60 15.15
100⁰C, cSt
Viscosity Index D2270 190 187 169 156
Flash Point, COC, ⁰C D92 214 224 232 242
Pour Point, ⁰C D97 -36 -36 -33 -30
Demulsibility Test D1401 Pass Pass Pass Pass
Copper Strip Corrosion Test D130 Pass Pass Pass Pass

NAS Cleanliness NAS 1638 8 8 8 8

The above details are typical results of normal production and variations in these characteristics may occur. The
information contained herein is subject to change without notification. All recommendations and suggestions are
without guarantee and the manufacturers do not accept liability for any loss or damage, however arising, which
results directly from the use of such information, nor do we offer any warranty .

Storage:
Store the products indoors and avoid direct sunlight or heat. Please keep the container in closed
condition always.

Environment, Health and Safety

Rev.No.00 dtd 17th Jul. 2019