13
Motor
Mount
Valves
MODEL DESCRIPTION FLOW CAVITY PAGE NO.
MMRB-30090 MANIFOLD MOUNT RISER BLOCK 13-010.1
BRAKE MMRV-10 MOTOR MOUNT RELIEF VALVE 26 GPM C1020 13-110.0
B
A
BRAKE MMPC-10 MOTOR MOUNT PILOTED CHECK 18 GPM C1025 13-120.0
B
A
MMCB-10 MOTOR MOUNT COUNTERBALANCE 20 GPM C1025 13-130.0
BRAKE
MMCB-12 35 GPM C1225 13-131.0
B
GENERAL INFORMATION FOR MOTOR MOUNT VALVES (ABOVE)
MOTOR MOUNT PORTS (INTERFACE SPECIFICATION) 13-010.0
Reference: 520-P-130000-EN-00/09.2015
MMRB-30090
MOTOR MOUNT RISER BLOCK
3.00"
1.88"
1.20"
MMRB-30090-X
MMRB-30090-X
BASIC SEALS
MOTOR MOUNT RISER BLOCK N = BUNA (12113)
V = VITON (14113)
DESCRIPTION
THIS UNIT IS A RISER BLOCK TO MOUNT IN BETWEEN THE VALVE
AND A LOW SPEED HIGH TORQUE HYDRAULIC MOTOR SUCH AS EATON,
WHITE, PARKER (HPI & ROSS), DANFOSS, ETC. WITH MANIFOLD
MOUNTING DIMENSIONS SPECIFIED ON PAGE 13-010.0 TO CLEAR
A LARGE REAR FLANGE OR A BRAKE.
MATERIAL: ANODIZED ALUMINUM ALLOY.
Reference: 520-P-130101-EN-00/09.2015
MMRV-10
MOTOR MOUNT RELIEF VALVE
A A A A
BRAKE BRAKE BRAKE BRAKE
B B B B
TYPE "A" TYPE "B" TYPE "C" TYPE "D"
"E"/SHUTLLE "F"/SHUTTLE "G"/SHUTTLE "H"/SHUTTLE
1.75"
[44,5]
A B
4.00"
[50,8]
2.45"
[62,2]
BRAKE
1.80"
[45,7]
2.00" 3.25"
[50,8] [82,5]
L/M (28,5 cSt)
MMRV-10-X-X-X-10TA-XX-XX 15 30 45 60 75 90
4000 275
BASIC
USE ON 3500 240
D & H
P)
SIZE "D" & "H" ONLY
10 = 7/8"-14UNF 3000 205
PRESSURE RANGE
PRESSURE DROP (
SEALS 15 = 0 TO 1500 PSI
2500 170
N = BUNA "N" 30 = 0 TO 3000 PSI
C & G
V = VITON
2000 140
PORTS
ADJUSTMENT 10TA = SAE - #10
C = CAPPED 1500 A, B, E & F 105
S = SCREW OTHER PORTS AVAILABLE
T = TAMPERPROOF UPON REQUEST 1000 70
TYPE
"A","B","C","D","E","F","G"&"H" 500 35
(SEE OTHER SIDE PAGE 13-110.1)
FOR ADJUSTMENT CONTROL
PSI BAR
OPTIONS SEE PAGE 0-050.0 0 4 8 12 16 20 24
G.P.M.(135 SUS)
Reference: 520-P-131100-EN-00/09.2015
MMRV-10
MOTOR MOUNT RELIEF VALVE
DESCRIPTION
THIS UNIT IS A CROSS PORT RELIEF VALVE TO MOUNT ON TO
A LOW SPEED HIGH TORQUE HYDRAULIC MOTOR SUCH AS EATON,
WHITE, PARKER (HPI & ROSS), DANFOSS, ETC. WITH MANIFOLD
MOUNTING DIMENSIONS SPECIFIED ON PAGE 13-010.0
OPERATIONS
TYPE PORT RELIEFS CARTRIDGE VALVE
A "A" TO "B" RVPS-10-X-X-0-XX
B "B" TO "A" RVPS-10-X-X-0-XX
C "A" TO "B" & "B" TO "A" RVBD-10-X-X-0-XX
SAME PRESSURE SETTING
D "A" TO "B" & "B" TO "A" RVPP-10-X-X-0-XX
INDEPENDENT SETTINGS
E "A" TO "B" (SAME AS "A") WITH BRAKE SHUTTLE
F "B" TO "A" (SAME AS "B") WITH BRAKE SHUTTLE
G "A" TO "B" & "B" TO "A" WITH BRAKE SHUTTLE
( SAME AS "C" )
H "A" TO "B" & "B" TO "A" WITH BRAKE SHUTTLE
( SAME AS "D" )
SPECIFICATIONS
OPERATING PRESSURE: 3000 PSI [210 BAR].
OPERATING TEMPERATURE: -40° TO +250° F. [-40° TO +120° C.].
OPERATING MEADIA: ALL GENERAL PURPOSE HYDRAULIC FLUIDS.
BRAKE PORT WHEN REQUIRED IS SAE-#4 (7/16"-20 UNF THD.)
MATERIAL: ANODIZED ALUMINIUM ALLOY BODY.
OPTIONAL: PROVISIONS CAN BE MADE TO CLEAR THE MOUNTING
BOLT ON THE SAE "A" FLANGE MOUNT MOTOR WITH MOUNTING
HOLE ON THE SAME SIDE AS THE WORKING PORTS "A" AND "B".
info.el@bucherhydraulics.com www.bucherhydraulics.com/commoncavity
© 2015 by Bucher Hydraulics, Inc., 2545 Northwest Parkway, Elgin, Illinois 60124, USA
All rights reserved.
Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense.
The information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to
continual improvement, we reserve the right to amend the product specifications contained in this catalogue.
Reference: 520-P-131100-EN-00/09.2015
MMPC-10
MOTOR MOUNT PILOTED CHECK
A A A
BRAKE BRAKE BRAKE
B B B
TYPE "A" TYPE "B" TYPE "C"
"D"/SHUTTLE "E"/SHUTTLE "F"/SHUTTLE
.75"
[19,0]
A B
4.00"
[50,8]
2.70"
[68,6]
BRAKE
1.80"
[45,7]
2.00" 3.25"
[50,8] [82,5]
L/M (28,5 cSt)
MMPC-10-X-X-X-10TA-XXX 11,3 22,5 33,8 45 56,3 67,5
200 14,0
BASIC
SIZE
P)
10 = 7/8"-14UNF 150 10,5
CRACK PRESSURE
010 = 10 PSI
PRESSURE DROP (
SEALS
N = BUNA "N" 030 = 30 PSI
V = VITON 060 = 60 PSI
100 7,0
PORTS FREE FLOW
ADJUSTMENT 10TA = SAE - #10
F = FIXED (STANDARD)
M = MANUAL LOAD RELEASE OTHER PORTS AVAILABLE
UPON REQUEST 50 3,5
PILOTED OPEN
TYPE
"A","B","C","D","E" & "F"
(SEE OTHER SIDE PAGE 13-120.1) PSI BAR
0 3 6 9 12 15 18
G.P.M.(135 SUS)
Reference: 520-P-131200-EN-00/09.2015
MMPC-10
MOTOR MOUNT PILOTED CHECK
DESCRIPTION
THIS UNIT IS A PILOT OPERATED CHECK VALVE TO MOUNT ON TO
A LOW SPEED HIGH TORQUE HYDRAULIC MOTOR SUCH AS EATON,
WHITE, PARKER (HPI & ROSS), DANFOSS, ETC. WITH MANIFOLD
MOUNTING DIMENSIONS SPECIFIED ON PAGE 13-010.0
SEE PAGE 1-102.0 FOR MORE INFORMATION ON PERFORMANCE DATA
AND OTHER OPTIONS OF THE CARTRIDGE #POCI-10-N-F-0-XX.
OPERATIONS
TYPE CHECKED PORT CARTRIDGE VALVE
A "A" POCI-10-X-X-0-XX
B "B" POCI-10-X-X-0-XX
C "A" & "B" POCI-10-X-X-0-XX
D "A" WITH BRAKE SHUTTLE
E "B WITH BRAKE SHUTTLE
F "A" & "B" WITH BRAKE SHUTTLE
SPECIFICATIONS
OPERATING PRESSURE: 3000 PSI [210 BAR].
OPERATING TEMPERATURE: -40° TO +250° F. [-40° TO +120° C.].
OPERATING MEDIA: ALL GENERAL PURPOSE HYDRAULIC FLUIDS.
BRAKE PORT WHEN REQUIRED IS SAE-#4 (7/16"-20 UNF THD.)
MATERIAL: ANODIZED ALUMINIUM ALLOY BODY.
PILOT RATIO: 3 TO 1.
OPTIONAL: PROVISIONS CAN BE MADE TO CLEAR THE MOUNTING
BOLT ON THE SAE "A" FLANGE MOUNT MOTOR WITH MOUNTING
HOLE ON THE SAME SIDE AS THE WORKING PORTS "A" AND "B".
info.el@bucherhydraulics.com www.bucherhydraulics.com/commoncavity
© 2015 by Bucher Hydraulics, Inc., 2545 Northwest Parkway, Elgin, Illinois 60124, USA
All rights reserved.
Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense.
The information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to
continual improvement, we reserve the right to amend the product specifications contained in this catalogue.
Reference: 520-P-131200-EN-00/09.2015
MMCB-10
MOTOR MOUNT COUNTERBALANCE
A
A A
BRAKE BRAKE BRAKE
B
B B
TYPE "A" TYPE "B" TYPE "C"
"D"/SHUTTLE "E"/SHUTTLE "F"/SHUTTLE
1.75"
[44,5]
A B
4.00"
[50,8]
2.70"
[68,6]
BRAKE
1.80"
[45,7]
2.00" 3.25"
[50,8] [82,5]
L/M (28,5 cSt)
MMCB-10-X-X-X-10TA-XX 11,3 22,5 33,8 45 56,3 67,5
400 27,5
BASIC
350 24,0
P)
SIZE
10 = 7/8"-14UNF 300 20,5
PRESSURE RANGE PILOTED OPEN
PRESSURE DROP (
SEALS 15 = 100 TO 1500 PSI
30 = 300 TO 3000 PSI
250 17,0
N = BUNA "N"
V = VITON
200 14,0
PORTS
ADJUSTMENT 10TA = SAE - #10
C = CAPPED 150 10,5
S = SCREW OTHER PORTS AVAILABLE FREE FLOW
T = TAMPERPROOF UPON REQUEST 100 7,0
TYPE
"A","B","C","D","E" & "F" 50 3,5
(SEE OTHER SIDE PAGE 13-130.1)
FOR ADJUSTMENT CONTROL PSI BAR
OPTIONS SEE PAGE 0-050.0 0 3 6 9 12 15 18
G.P.M.(135 SUS)
Reference: 520-P-131300-EN-00/09.2015
MMCB-10
MOTOR MOUNT COUNTERBALANCE
DESCRIPTION
THIS UNIT IS A COUNTERBALANCE VALVE TO MOUNT ON TO
A LOW SPEED HIGH TORQUE HYDRAULIC MOTOR SUCH AS EATON,
WHITE, PARKER (HPI & ROSS), DANFOSS, ETC. WITH MANIFOLD
MOUNTING DIMENSIONS SPECIFIED ON PAGE 13-010.0
SEE PAGE 8-052.0 FOR MORE INFORMATION ON PERFORMANCE DATA
AND OTHER OPTIONS OF THE CARTRIDGE #CBPA-10-N-S-0-XX.
OPERATIONS
TYPE PORT COUNTERBALANCED CARTRIDGE VALVE
A "A" CBPA-10-X-X-0-XX
B "B" CBPA-10-X-X-0-XX
C "A" & "B" CBPA-10-X-X-0-XX
D "A" E WITH BRAKE SHUTTLE
E "B WITH BRAKE SHUTTLE
F "A" & "B" WITH BRAKE SHUTTLE
SPECIFICATIONS
OPERATING PRESSURE: 3000 PSI [210 BAR].
OPERATING TEMPERATURE: -40 TO +250 F [-40 TO +120 C].
OPERATING MEDIA: ALL GENERAL PURPOSE HYDRAULIC FLUIDS.
BRAKE PORT WHEN REQUIRED IS SAE-#4 (7/16"-20 UNF THD.)
MATERIAL: ANODIZED ALUMINIUM ALLOY BODY.
PILOT RATIO: 4 TO 1.
OPTIONAL: PROVISIONS CAN BE MADE TO CLEAR THE MOUNTING
BOLT ON THE SAE "A" FLANGE MOUNT MOTOR WITH MOUNTING
HOLE ON THE SAME SIDE AS THE WORKING PORTS "A" AND "B".
info.el@bucherhydraulics.com www.bucherhydraulics.com/commoncavity
© 2015 by Bucher Hydraulics, Inc., 2545 Northwest Parkway, Elgin, Illinois 60124, USA
All rights reserved.
Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense.
The information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to
continual improvement, we reserve the right to amend the product specifications contained in this catalogue.
Reference: 520-P-131300-EN-00/09.2015
MMCB-12
MOTOR MOUNT COUNTERBALANCE
A
A A
BRAKE BRAKE BRAKE
B
B B
TYPE "A" TYPE "B" TYPE "C"
"D"/SHUTTLE "E"/SHUTTLE "F"/SHUTTLE
1.88"
[47,8]
A B
4.50"
[114,3]
2.86"
[72,6]
BRAKE
3.50" 3.47" 1.75"
[88,9] [88,2] [44,5]
L/M (28,5 cSt)
MMCB-12-X-X-X-12TA-XX 33,6 45,0 67,6 90 112,6 135
400 27,5
BASIC
350 24,0
SIZE
P)
12 = 1.062"-12UNF 300 20,5
PRESSURE RANGE PILOTED OPEN
PRESSURE DROP (
SEALS 15 = 0 TO 1500 PSI
30 = 0 TO 3000 PSI
250 17,0
N = BUNA "N"
V = VITON
200 14,0
PORTS
ADJUSTMENT 12TA = SAE - #12
C = CAPPED 150 10,5
S = SCREW OTHER PORTS AVAILABLE FREE FLOW
T = TAMPERPROOF UPON REQUEST 100 7,0
TYPE
"A","B","C","D","E" & "F" 50 3,5
(SEE OTHER SIDE PAGE 13-131.1)
PSI BAR
FOR ADJUSTMENT CONTROL 0 6 12 18 24 30 36
OPTIONS SEE PAGE 0-050.0
G.P.M.(135 SUS)
Reference: 520-P-131310-EN-00/09.2015
MMCB-12
MOTOR MOUNT COUNTERBALANCE
DESCRIPTION
THIS UNIT IS A COUNTERBALANCE VALVE TO MOUNT ON TO
A LOW SPEED HIGH TORQUE HYDRAULIC MOTOR SUCH AS EATON,
WHITE, PARKER (HPI & ROSS), DANFOSS, ETC. WITH MANIFOLD
MOUNTING DIMENSIONS SPECIFIED ON PAGE 13-010.0
SEE PAGE 8-053.0 FOR MORE INFORMATION ON PERFORMANCE DATA
AND OTHER OPTIONS OF THE CARTRIDGE #CBPA-12-N-S-0-XX.
OPERATIONS
TYPE PORT COUNTERBALANCED CARTRIDGE VALVE
A "A" CBPA-12-X-X-0-XX
B "B" CBPA-12-X-X-0-XX
C "A" & "B" CBPA-12-X-X-0-XX
D "A" WITH BRAKE SHUTTLE
E "B WITH BRAKE SHUTTLE
F "A" & "B" WITH BRAKE SHUTTLE
SPECIFICATIONS
OPERATING PRESSURE: 3000 PSI [210 BAR].
OPERATING TEMPERATURE: -40 TO +250 F [-40 TO +120 C].
OPERATING MEDIA: ALL GENERAL PURPOSE HYDRAULIC FLUIDS.
BRAKE PORT WHEN REQUIRED IS SAE-#4 (7/16"-20 UNF THD.)
MATERIAL: ANODIZED ALUMINIUM ALLOY BODY.
PILOT RATIO: 4 TO 1.
OPTIONAL: PROVISIONS CAN BE MADE TO CLEAR THE MOUNTING
BOLT ON THE SAE "A" FLANGE MOUNT MOTOR WITH MOUNTING
HOLE ON THE SAME SIDE AS THE WORKING PORTS "A" AND "B".
info.el@bucherhydraulics.com www.bucherhydraulics.com/commoncavity
© 2015 by Bucher Hydraulics, Inc., 2545 Northwest Parkway, Elgin, Illinois 60124, USA
All rights reserved.
Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense.
The information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to
continual improvement, we reserve the right to amend the product specifications contained in this catalogue.
Reference: 520-P-131310-EN-00/09.2015
MOTOR MOUNT
MANIFOLD MOUNT MOTOR PORTS
.810" DIA. C'BORE X .080" DEEP
1.25"
0.90"
1.80" 2.50"
0.56"
1.13"
5/16"-18 UNC 2B X .50" DEEP
Reference: 520-P-130100-EN-00/09.2015
