Cargotec Brazil Ltda
Rua Alexandre Herculano, 197
CEP 11050-031 Santos - SP
Phone: +55 (13) 3308-2230
www.kalmaglobal.com
Quotation DCG160-12 MAERSK 01-16
Date: September 26th, 2016
Model: Forklift Truck Kalmar DCG160-12
Delivery Date: 120 / 130 days to be confirmed at the time of receipt of order & down payment.
Location: Chile
Customer: Maersk
Contact: Neil Desai
E-mail: Neil.Desai@maersk.com
Phone: +1 713-346-4367
Kalmar Area
Contact: Alexandre Esse
e-mail: alexandre.esse@kalmarglobal.com
Phone: +55 13 99210 0227
DCG160-12
Some Optional equipment may be included in equipment illustration
Page 2
Quotation DCG160-12 MAERSK 01-16
Technical Description
Chassis
Capacity: 16 ton. @ 1200 load center
Mast
Two-stage standard mast with throught-vision design
Overall mast height, lowered = 3695 mm
Maximum lift height, forks = 4000 mm
Mast tilt angles = 10 backward / 5 forward
Carriage
Roller-type carriage with sideshift and simultaneous fork-positioning
maximum at forks outside to outside edge 2500 mm
Fork-positioning
Forks
One set, standard forks
Dimensions 250 x 100 x 2400 mm
Included options
Hook-type fork shaft mounting for SS/FP carriage for quick and easy change
Drive train
Two stage filter with integrated pre-cleaner and service indicator in cab display
Two stage filter with integrated pre-cleaner and service indicator
Engine
Cummins QSB6.7 (Tier III)
Electronically controlled and monitored
6 cylinder turbo diesel engine
173 horsepower (129 kW) @ 2200 rpm
590 lb-ft (800 Nm) @1400 rpm
Protection system for engine and transmission
Transmission
ZF 3WG161 series transmission
Electronically controlled and monitored hydrodynamic transmission
3 speed forward - 3 speed reverse with automatic gear change
Directional lockout protection - forward/reverse
Automatic gear shifting
Two stage filter with integrated precleaner and service indicator
Steering axle
Heavy duty Kalmar designed steer axle
Single, double-acting steering cylinder
Drive axle
Heavy duty Kessler drive axle
Wheel and differential hub reduction
Page 3
Quotation DCG160-12 MAERSK 01-16
Service brake
Maintenance free oil-cooled wet disc service brakes
Parking brake
Spring actuated dry-disc parking brake located on the drive line
Cab
Kalmar EGO Cab, the most ergonomic operating environment in the industry
Designed with smart profiles and impact resistant curved front and
rear window for improved visibility. An optimized view at all angles
with exceptionally good view diagonally, forward and backward.
3.5" Color display
-Onboard diagnostics
-Drivetrain monitoring including alarms
Right armrest/hydraulic control panel adjusts electronically up/down
& forward/backward with storage compartment
Tilt steering wheel forward/backward, side to side and telescopes
up/down Mechanical suspension, 4-way adjustable, cloth driver
seat and orange colored seat belt
Floor mounted adjustable pedals with hanging pedal feel
Multi-function lever on steering column (horn, turn signal)
Heavy duty directional switch on steering column including park
brake switch Windshield wipers and washers: front, roof, and back
Multi-speed cab heater/defroster with electronic fan and
temperature control Low profile dash panel with cup holders and large directional defrost vents
Sliding windows in both left and right doors
One (1) internal rear view mirror
Information lamps: Main light, fault indication, direction indicator, warning lights, parking brake
Industrial rubber floormat
Grab handle in front of door, mounted on both sides of cab, for easy entry into cab
Tilting cab with manual pump, for easy service access
Only for diesel forklift: Display: time(12h/24h), engine RPM, battery level, engine oil pressure,
engine coolant temperature, transmission oil temperature, fuel level, AdBlue level, operating time,
Vehicle speed(km/h or mph), Battery voltage, ECO Drive Mode, Error history.
Included options
Electronic climate controlled (ECC) air conditioning, with fresh air filter. Total height 8"
Retractable sun visor roof screen
Rotating beacon, adjustable LED type
Hydraulics
Included options
Cooling hydraulic system
Hydraulic cylinder accumulator for lifting function
Electrical system
24 V electric system
Fully redundant CAN-bus system
Weatherproof connectors
Control units and fuses protected within an easily accessible and weatherproof cabinet on side of
chassis.
Braided wire looms protect wire harnesses and do not trap moisture
Page 4
Quotation DCG160-12 MAERSK 01-16
LED Lighting
Two (2) working lights mounted on mast
Two (2) rear lights, backward direction, mounted on back of cab
Two (2) headlights on front mud guards
Two (2) tail lights/brake lights, mounted on counterweight
Four (4) blinkers
- two mounted on front mud
- two mounted on counterweight
Two (2) reflectors on each side of chassis
Included options
Reverse alarm 87-112 dB(A)
EDM, Eco Drive Modes
Eco Drive Modes
Three different modes: power, normal and eco mode
Power for maximum productivity
Normal for good performance and decreased fuel consumption (up to 10% lower compared to power
mode)
Eco for low fuel consumption (up to 20% lower compared to power mode)
Note! The actual fuel consumption is dependent on driver behavior and type of application.
Tire and rim
The rims are interchangeable between the steer and drive axles.
Type / Make
Drive wheels 4 pc
Steer wheels 2 pc
Pneumatic / Hauler
12.00 x 20 with reinforced rim
12.00 x 20 with reinforced rim
Color
Chassis
Cab
Mast, carriage, forks
Decals/logos/stripes
Red
Grey
Black
White
RAL 3000
RAL 7011
RAL 7021
RAL 7047
Documentation
The following documentation is included as standard:
* Instruction manual
* Maintenance manual
* Individual parts catalog
Extra equipment
Included options
Anti-slip material on mudguards and tanks
Fire extinguisher 13 lbs. mounted behind foot step. EN3
Lockable fuel cap
Options NOT Included
Automatic central lubrication system - 14 points (Add - EUR 2.700,00)
8 points on the steering axle
6 points on the mast
Coil ram 250 x 1800 mm (Add - EUR 7.000,00)
Page 5
Quotation DCG160-12 MAERSK 01-16
=============================================================================
Pricing: EUR 148.800,00 FCA Lidhult, Sweden Incoterms 2010
Freight Rate (Estimated): EUR 7.200,00 CIF Port of San Antonio.
Quantity: One (1) Unit
Delivery: 120 / 130 days (EXW Lidhult). After Receipt of Order with confirmed receipt of downpayment.
=============================================================================
Delivery Terms: As per Incoterms 2010
Warranty Terms: 1 year / 2000 hours, whichever occurs first.
Payment Terms: 20% Down Payment for order confirmation, 80% prior to the shipment.
Financing: Financing is available upon request and subject to approval of credit.
Assembly: The buyer must provide the crane to assemble the equipment.
=============================================================================
Thank you for the opportunity to quote Kalmar Equipment
Availability is subject to prior sale
This quotation is valid for 10 days from Issue Date
