PL3000 portable lathe 08 2PL3
010
Eliminates most of the dismantling needed
to do a simple metal cutting repair job.
The rugged and dependable Climax Model
PL3000 Portable Lathe is a precision
machine tool engineered re-turn large shafts
and roll journals by bolting directly to the
end of the workpiece and rotating around
the shaft.
Heavy duty, powerful, precise
• Heavy solid steel turning bar and
counterbalanced body provide smooth
turning and minimum chatter, even with
the turning bar at maximum reach.
• The motor and planetary ring gear drive
provide enough torque to remove up to
0.125 inch (3.175 mm) of metal so you
can get the job done fast.
• A 3.08 Hp (2.3 kW) electric motor and
a 1.22 Hp (0.91 kW) pneumatic motor
is available.
• Tool reach is 16.0 inches (406.4 mm)
from end of shaft, and up to 22.0 Quick and easy to set up
inches (558.8 mm) with optional turning • Mounts on the end of the shaft. Simply
bar extension. remove the gear or bearing to expose
• Turns shafts from 4.0 - 11.25 inches the end of the shaft.
(101.6 - 285.75 mm). (This machine • The PL3000 can be set up by an
works within a 16.75 inch (425.5mm) experienced operator in less than an
diameter space around the shaft (swing hour. Drill and tap four mounting holes
diameter), and 36 inches (914.4 mm) on the end of the shaft to attach the
from the end of the shaft.) tapered mounting flange.
• Automatic axial feed is variable from • Adjusting screws allow accurate
0.003 - 0.011 inches/rev. (0.076 - 0.279 centering and alignment even if the
mm/rev.) in 7 increments shaft face is no longer square.
Accessories
No. Description No. Description
10649 PL3000 portable lathe, pneumatic 10586 Abrasive belt holder
10649CE CE-Compliant model Belt holder mounts to the tool end of the turning bar. Use
Complete lathe machine. Turns shafts and roll journals with an abrasive belt to produce a fine finish on the shaft.
8.0 - 11.0 inches (203.2 to 279.4 mm) in diameter. Abrasive belts not provided.
Machine mounts to the end of the shaft with a blank
tapered mounting flange (included). Also includes 11784 ID Mounting collet assembly
counterbalanced mainbody, pneumatic planetary housing, Allows the PL3000 to be mounted inside work piece
1.22 hp (.91 kW) air motor, pneumatic conditioning unit, diameters from 4.7 - 10.95 inches (119.4 -278.1 mm).
16.0 inch (406.4 mm) reach turning bar, abrasive belt Assembly includes ID mounting flange, collet body with
holder, tool kit with 3/8 inch (or 10 mm) square HSS lathe fingers and jaws, screw shaft with threaded cones, and
tool and dial indicator, instruction manual, and wooden necessary hardware.
storage crate. 28545 ID mounting collet assembly, no jaws
Same as above without fingers or jaws.
ID jaw sets
Model PL3000 portable lathe, electric Jaw set Fits in dia.
As above with electric motor and speed control instead of 28539 0.5 (12.7) 4.7 - 5.95
the air motor and pneumatic conditioning unit. (119.4 - 151.1)
13872 PL3000 Portable lathe, 120V motor 28540 1.0 (25.4) 5.7 - 6.95
15524 PL3000 Portable lathe, 230V motor (144.8 - 176.5)
28541 1.5 (38.1) 6.7 - 7.95
(170.2 - 201.9)
Tapered mounting flange assembly 28542 2.0 (50.8) 7.7 - 8.95
Precision machined mounting flange securely mounts the (195.6 - 227.3)
portable lathe to the end of the shaft. One blank mounting
28543 2.5 (63.5) 8.7 - 9.95
flange is included with the machine.
(221.0 - 252.7)
10640 Blank tapered mounting flange assembly.
28544 3.0 (76.2) 9.7 - 10.95
Machine to your mounting configuration.
(246.4 - 278.1)
10642 Machine tapered mounting flange
assembly. Factory machined to your
mounting specifications.
10636 Turning bar extension - 22 inch
(558.8 mm) reach
Mount the turning bar extension between the end of the
standard turning bar and the tool housing to extend the
reach of the bar from 16.0 - 22.0 inches (406.4 - 558.8
mm). For longer bar reaches, contact your Climax
representative.
37811 Tooling Pack (not shown)
One HSS 3/8 inch x 3.0 inch side cutting tool
bit, and one HSS
3/8 inch x 3.0 inch top cutting tool bit
in storage case.
Tool holders
Extra tool holders for use with the standard 16.0 inch
(406.4 mm) turning bar and the 22.0 inch (558.8 mm)
turning bar extension. Holders use 3/8 inch or 10 mm
square HSS lathe tool bits.
10643 Tool holder, 4 - 6 inches Used to turn
shafts 4 - 6 inches (101.6 to 152.4 mm)
in diameter
10644 Tool holder, 6 - 8 inches Used to turn s
hafts 6 - 8 inches (152.4 to 203.2 mm)
in diameter.
18368 Tool holder, 8 - 11 inches Used to turn NOTE: Drawings are for reference only, are not to scale, and
shafts 8 - 11 inches (203.2 to 279.4 mm) may not represent actual product.
in diameter
Climax Portable Machining & Welding Systems Web site: climaxportable.com
page 2
Worldwide Phone: 1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: Info@cpmt.com
Specifications
US Metric
Overall length, electric
std. bar fully retracted 27.0 inches 685.8 mm
std. bar fully extended 43.0 inches 1092.2 mm
Overall length, pneumatic
std. bar fully retracted 31.0 inches 787.4 mm
std. bar fully extended 47.0 inches 1193.8 mm
Overall width 10.5 inches 266.7 mm
Overall height, with the optional 16.0 inches 406.4 mm
Turning Reach (from spindle face)
standard bar 16.0 inches 406.4 mm
standard bar w/ optional extension 22.0 inches 558.8 mm
Shaft dia. max 11.25 inches 285.8 mm
Shaft dia. min
with standard tool holder (18368) 8.0 inches 203.2 mm
with optional tool holder (10644) 6.0 inches 152.4 mm
with optional tool holder (10643) 4.0 inches 101.6 mm
Swing clearance, min. radius 8.375 inches 212.7 mm
Axial feed, automatic 0.003 - 0.011 inches/rev 0.076 - 0.279 mm/rev
Turning bar diameter 2.31 inches 58.7 mm
Cutter 3/8 inch lathe tool bit 10 mm lathe tool bit
Tool depth adjustment, manual 1.125 inches total 28.575 mm total
radial travel in three increments of: 0.375 inches 9.525 mm
Power, electric
120V, 60 Hz continuous 3.08 Hp 2.30 kW
Intermittent 4.80 Hp 3.58 kW
230V, 50 Hz continuous 3.08 Hp 2.30 kW
Intermittent 4.80 Hp 3.58 kW
Torque: 98 ft-lbs (135 N·m) max at 72 rpm bar speed. Bar free speed: 72 rpm max. Gear ratio: 8:1. Variable
speed control with settings 20 - 72 rpm.
Power, pneumatic 1.22 Hp 0.91 kW
[non-reversing, Hp rated at 265 rpm). Torque: 24.2 ft-lbs (32.9 N·m) at full power, 33 rpm. Gear ratio 8:1.
Infinitely variable speed control with needle valve. Air flow required: 90 psi @ 30 ft3/min
(620 kPa @ 0.85 m3/min).]
Operating weight 200 lbs. 90.7 kg
Shipping weight 261 lbs. 118.4 kg
Shipping dimensions L x W x H 33 x 27 x 17 inches 838.2x685.8x431.8 mm
All dimensions should be considered reference. Contact your Climax Representative for precision dimensions. Specifications are subject to change without notice. There are no systems or components
on this machine that are capable of producing hazardous EMC, UV or other radiation hazards. The machine does not use lasers nor does it create hazardous materials such as gasses or dust.
Climax Portable Machining & Welding Systems Web site: climaxportable.com
page 3
Worldwide Phone: 1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: Info@cpmt.com
Operational Dimensions
Electric
Pneumatic
Climax Portable Machining & Welding Systems Web site: climaxportable.com
page 4
Worldwide Phone: 1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: Info@cpmt.com
Training at the Global Learning Center
Climax has been teaching the fundamentals and fine
points of portable machine tool operation for practically as
long as we’ve been inventing and building the tools.
At the Climax Global Learning Center situated in our
corporate headquarters near Portland, Oregon, we
provide training for machine tool operators on portable
machine tool safety, and machine setup and operation.
Trainees also receive technical tips and tools to improve
operational efficiencies, with the vast majority of every
program devoted to hands-on activities and skill
development.
The Climax instructional team includes specialists in shipbuilding, power generation, civil engineering, bridge re-building,
petrochemical and other industries.
Whether it’s a regularly scheduled course at the Global Learning Center, or custom curriculum conducted at your facility,
your machinists will benefit from courses developed by some of the most respected authorities in the business.
Call us today to register for a regularly scheduled class, or talk to us about how we can customize a training program for
your specialized application.
Climax Portable Machining & Welding Systems Web site: climaxportable.com
page 5
Worldwide Phone: 1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: Info@cpmt.com
Climax Global Locations
Gdansk
Manchester
Cincinnati
Edmonton
European Headquarters
World Headquarters Cologne
Portland Manchester
Charlotte
Houston
Baton Rouge
Monterrey
Singapore
Perth
Production Facilities
Rental Locations
International Distributors
Regional Sales & Technical Support Offices
Call Climax for:
On-site Training Special Projects Rentals
Need some refresher courses in setting up Climax has been solving complicated With seven locations in North America, two
and operating your Climax machine tool? on-site machining and welding problems for in Europe and two in Asia, you are never
our customers since 1964. far away from a Climax portable machine
tool.
Connect with us:
World Headquarters European Headquarters
2712 E. Second Street Am Langen Graben 8
Newberg, Oregon 97132 USA 52353 Düren, Germany
Worldwide Telephone: 1.503.538.2185 Telephone:(+49) (0) 2421.9177.0
N. America Toll-Free: 1.800.333.8311 Fax: (+49) (0) 2421.9177.29
Fax: 1.503.538.7600 Email: info@cpmt.de
Email: info@cpmt.com
Copyright © 2012 Climax Portable Machining & Welding Systems. All Rights
Reserved. Climax has taken reasonable measures to ensure the accuracy
of the information contained in this document. However, Climax makes no
warranties or representations with respect to the information contained herein;
and Climax shall not be held liable for damages resulting from any errors or
omissions herein, or from the use of the information contained in this document.
