Construction of Gas Treatment Plant -Tataouine Gas Project
Contract No. Document No. Rev.
AOI NO 01/2018 TGP-JE-GTPT-240-EQ-DAT-0018 C01
Date 30/09/2019 Page 1 of 5
Data Sheet
Data Sheet for Mercury Removal Unit Dust Filter
(GTPT-F-240-003A/B)
Document No.TGP-JE-GTPT-240-EQ-DAT-0018
C01 22/05/2020 Issued for Review XY Meng WQ Liu DW Zhan
Rev Date Description Prepared by Reviewed by Approved by
Project Name:
Construction of Gas Treatment Plant -Tataouine Gas Project
Contract No.: AOI NO 01/2018
Document No.: TGP-JE-GTPT-240-EQ-DAT-0018 Rev.: C01 Page: 2 of 5
1 Equipment Name: Mercury Removal Unit Dust Filter
2 Tag Number: GTPT-F-240-003A/B PO Number:
3 Quantity: 2 Manufacturer:
4 Operating and Design Conditions
5 Design Code: ASME BPVC. VIII Div. 1 Design Life: Years 25
6 Medium: Dry Gas Ambient Temperature: °C Min.-1.4 Max.47.6
7 Operating Temperature: °C 30～42 Min. Design Metal Temperature: °C -5
8 Operating Pressure: barg 62.3～68.25 Medium: Sweet Sour High C1- Wet H2S
9 Design Temperature: °C 80 Location: Indoor Outdoor Mounded
10 Design Pressure: barg 75.1 Under Shed: Yes No
11 Density(Gas/Oil)@Operating Temp: kg/m3 61.37 Skid Mounded: Yes No
3 Horizontal Vertical
12 Nominal Capacity: m 0.8 Vessel Type:
13 Shell Diameter(ID): mm 700(VTC) Upper Head Type: 2:1 Semi-Ellipse Flat
14 Shell Length(S/S) mm 2000(VTC) Lower Head Type: 2:1 Semi-Ellipse other Type
15 Corrosion Allowance: mm Shell:3, Head:3, Nozzles:3 Liquid Level: mm As Per P&ID
16 Wind Design Code: Eurocode 1 Thickness (Shell/Head): mm 27/27(min)(VTC)
17 Basic Wind Speed: km/h 118 Insulation: mm N/A
18 Seismic Design Code: EN 1998-1 Net Weight: kg by VENDOR
19 Ground Type: -- A Full of Water Weight: kg by VENDOR
20 Design Ground Acceleration: -- 0.1g Operationg Weight: kg by VENDOR
21 Joint Efficiency: -- 0.85 Pressure Drop, Allow./Calc. bar 0.3
22 Max. Allowable Working Pressure: barg by VENDOR Filtration Speed m3/m2 by VENDOR
23 Max. kg/h 23216 Filtration Efficiency Dust μm 1 1～3 ＞3
24 Total Fluid Flow Normal kg/h 21105 Filtration Accuracy Dust % 99 99.5 100
25 Min. kg/h 6332 Rated Flow kg/h 21105
26 Viscosity cp 0.0136
27 Applicable Specifications
28 TGP-JE-GTPT-000-EQ-SPE-0001 Specification for Welded Pressure Vesseles
29 TGP-JE-GTPT-000-EQ-SPE-0004 Specification for Equipment Welding
30 TGP-JE-GTPT-980-MC-SPE-0002 Specification for Coating and Painting
31 TGP-JE-GTPT-000-PI-SPE-0006 Specification for Allowable Nozzle Loads on Mechanical Equipment
32 TGP-JE-GTPT-000-PR-SPE-0003 Specification for Vessel Internals
33 Materials
34 Code ASME BPVC. II, ASTM Jacket Shell/Head: N/A
35 Shell: SA-516 Gr.70 Body Flange: SA-266 Gr.2N
36 Head: SA-516 Gr.70 Body Flange Gasket: As per Gasket Below
37 Nozzle(Pipe): SA-106 Gr.B Demister N/A
38 Nozzle(Plate): SA-516 Gr.70 Insulation Supports/Clips: N/A
39 Nozzle(Forged): SA-105 N Support: SA-36/SA-516 Gr.70
40 Nozzle Flange: SA-105 N Internals Attachments(hold): SA-36
41 Reinforcing Pads: SA-516 Gr.70 Earthing Boss: SS 304
42 Bolts/Nuts(Internal): SA-193 Gr.B7 / SA-194 Gr.2H Name Plate: SS 304
43 Bolts/Nuts(External): SA-193 Gr.B7 / SA-194 Gr.2H
44 Gasket: Spiral Wound Gakset: 316+Flexible graphite, IR-316, OR-CS, 4.5mm
45
Project Name:
Construction of Gas Treatment Plant -Tataouine Gas Project
Contract No.: AOI NO 01/2018
Document No.: TGP-JE-GTPT-240-EQ-DAT-0018 Rev.: C01 Page: 3 of 5
1 Internal & External Attachments
Saddle Lug Skirt Leg Yes No
2 Type of Support: Mist Eliminator:
Yes No Yes No
3 Manway with Davit/Hinge: Separation Internals:
Yes No Yes No
4 Vortex Breaker: Packing Supports:
Yes No Yes No
5 Insulation Supports/Clips: Ladders & Platforms:
Yes No Yes No
6 Heating Coil: Inner Ladder:
Yes No
7 Lifting Lugs:
8 Fabrication and Testing Requirements
9 Non-destructive Testing Fabrication Code: ASME BPVC. VIII Div. 1
10 Joint Category Test Means Test Ratio Grade NDE Code: ASME BPVC. V
11 RT SPOT UW-52 Welding Code: ASEM BPVC. IX
SHELL
12 UT N/A Appendix 12 Impact Test: As per Code
A
RT SPOT UW-52 Stress Relief (PWHT): Yes No
13
HEAD
14 UT N/A Appendix 12 Hardness Test : N/A
RT SPOT UW-52 Internal Coating: Yes No
15
B
16 UT N/A Appendix 12 External Painting & Coating: Yes No
NOZZLE
17 NPS＞10 or THK.＞29mm RT FULL UW-51 Hydraulic Test Pressure: barg NOTE 7
C
18 OTHER MT/PT FULL Appendix 6 / 8 Third Party Inspection: Yes No
D MT/PT FULL Appendix 6 / 8 Code Stamp Required: Yes No
19
20 Nozzle Schedule
21 Flange
Nozzle Mark Qty. Size Service
22 Rating Type Face
23 N1 1 6" CL600 WN RF Gas Inlet
24 N2 1 1-1/2" CL600 LWN RF Purging
25 N3a/b 2 1" CL600 LWN RF PDG
26 N4 1 1" CL600 LWN RF PG
27 N5 1 2" CL600 WN RF Drain
28 N6 1 6" CL600 WN RF Gas Outlet
29 N7 1 1-1/2" CL600 LWN RF Purging
30 N8a/b 2 1" CL600 LWN RF PdT
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
Project Name:
Construction of Gas Treatment Plant -Tataouine Gas Project
Contract No.: AOI NO 01/2018
Document No.: TGP-JE-GTPT-240-EQ-DAT-0018 Rev.: C01 Page: 4 of 5
Sketch
NOTE:
All dimensions are in mm except as noted.
Notes
1. Reference P&ID: TGP-JE-GTPT-240-PR-PID-0002.
2. The main approximate content in fluid:CO2 in gas is 2%(mol).
3. Flange gaskets seating face finish shall be 125 (3.2μm) to 250 (6.3μm) AARH.
4. All Load cases including transportation and erection(consider dressing up weight) need to be taken into consideration in design calculations.
5. Table with max. allowable nozzle loads shall be shown on the general arrangement drawing.
6. The hydrostatic test can only take place once the authorization certificate is obtained. CONTRACTOR pointed Tunisian Third Party Inspector
shall witness the hydrostatic test.
7. Hydrostatic test pressure is at least equal to 1.5 times the MAWP multiplied by the lowest stress ratio (LSR) for the materials of which the vessel
is constructed. The stress ratio for each material is the ratio of the stress value S at its test temperature to the stress value S at its design
temperature.
8. Flange bolts holes shall straddle filter's north-south line and true vertical line.
9. Proper position shall be reserved on the nameplate for third party inspector to stamp after hydrotest witness.
10.VTC：Vendor to confirm.
Project Name:
Construction of Gas Treatment Plant -Tataouine Gas Project
Contract No.: AOI NO 01/2018
Document No.: TGP-JE-GTPT-240-EQ-DAT-0018 Rev.: C01 Page: 5 of 5
Feed stream properties
Feed stream properties component
Notes: The above datas are under normal conditions (rich summer case). For other conditions, refer to TGP-JE-GTPT-000-PR-REP-0002
Heat & Material Balances
