TECHNICAL MANUAL
80-0421-13 KT5½
5-½” (140 mm) 18,700 lbs-ft Hydraulic Power Tong
6-¼” (159 mm) CLINCHER® Backup
SPECIFICATIONS | OPERATION | MAINTENANCE | PARTS
MCCOYGLOBAL.COM
©2006 - 2015 McCoy Global
ORIGINAL INSTRUCTIONS
This technical document applies to the following models:
OVERALL MODEL TONG MODEL BACKUP MODEL REV DESCRIPTION
5-½” configured power tong & compression load cell-style 6-¼”
80-0421-13 80-0420-28 85-0398 0 CLINCHER® backup. Tong equipped with hydraulic motor con-
trol, lift control, backup control, & rigid sling.
5-½” configured power tong & compression load cell-style 6-¼”
CLINCHER® backup. Tong equipped with hydraulic motor con-
80-0421-14 80-0420-29 85-0398 0 trol, lift control, backup control, & rigid sling. CLOSED CENTRE
HYDRAULICS
THIS EQUIPMENT USES A DOOR SWITCH SYSTEM DESIGNED TO INTERRUPT TONG ROTATION WHEN
TONG DOOR IS OPENED
McCoy has made an effort ensure that all illustrations are accurate, but please note that some illustrations
used in this manual may not exactly visually match your equipment.
PATENTED & PATENTS PENDING
80-0421-13 Technical Manual
KT5½-18.7K Hydraulic Power Tong
6¼ in CLINCHER® Backup Page iii
©2006 - 2015 McCoy Global
EC DECLARATION OF CONFORMITY
Manufacturer Information
McCoy Global Canada
14755 – 121A Avenue, Edmonton, AB, T5L 2T2, Canada
Product Description
Product Identification: Model: 80‐0421‐13 Serial Number: 20150159 & 20150160
Product Description: KT 5500‐6250 CBU
McCoy Global Technical Construction File Reference: T104
Hydraulically powered tong, with/without backup provided as a means of making up, or breaking out,
high torque tubular connections within the following specifications:
Specification Imperial Unit Metric Unit
Maximum Torque 18700 Ft/lbs 25357 Nm
Arm Length 32.0 Inch 81.3 Cm
Mass 2130 Lbs 966 Kg
Torque (Ft Lbs/N M, Estimated)
At Pressure 2250 Psi 155 Bar
3740 Hi 5071 Full
18700 Lo 25357 Full
Speed (Rpm, Estimated)
At flow rate 60 GPM 227 LPM
77.0 Hi 77.0 Full
15.4 Lo 15.4 Full
Jaw size range (Inch) 2 3/8 From 5 1/2 to
Overall Length 52.0 In 132.1 Cm
Overall Width 37.0 In 94.0 Cm
Overall Height 72.6 In 184.5 Cm
Noise Information
Current Rev: Author: Created Date: Approved by: Approved Date:
01 C. SANCHEZ 11/27/2014 W.MONDRAGON 03/03/2015
File: F‐CAN3‐QA‐20 EC Declaration of Conformity.docm / Revision: 01 Page 1 of 2
Technical Manual
Print Date: 6/20/2015 10:54 AM 80-0421-13
KT5½-18.7K Hydraulic Power Tong
Page iv 6¼ in CLINCHER® Backup
