Reliable
performance
Fan speed control is becoming Designed by Saginomiya in Japan, the
new XGE complements the already well
increasingly widespread in different
established range of RGE fan speed
refrigeration and air conditioning controllers, maintaining the excellent
units, with the benefits of reduced performance and reliability record.
Extensive performance testing under
noise and stable condensing different conditions, and stringent
pressures under different climatic quality control procedures ensure
trouble free operation for many
conditions.
XGE Fan Control
years.
For compact units, the new XGE from For example, prevention
of overheating is extremely
Danfoss Saginomiya provides the ideal important in such compact
solution for reliable fan control. controllers, and a specially
designed heat dissipation
With XGE, fan control has never radiator is placed on the side
of the controller, ensuring
been easier to implement. It can no overheating and a longer
be mounted directly onto the product lifetime.
refrigeration line, adjustment is In addition, XGE is fitted
with an electro-magnetic
made by the turn of a setting
suppression filter meeting
screw, and electrical connection is the requirements of the CE
very versatile. It can also be panel and EMC directives.
mounted where space is insufficient
on the refrigeration line. It can be Features
used for all the commonly used Max current 3A
Min current 0,2A
refrigerants, including R410A.
Enclosure IP 65
Max working pressure 47 bar
This installation and application Supply frequency 50/60 Hz
Operating ambient temperature -20 to 55 oC
flexibility provides the ideal solution Fluid temperature -20 to 70 oC
for many different types of Power supply 200-240 VAC
Pressure connection 7/16-20UNF female
condensing and air conditioning units. with depressor pin
Max voltage output 95% of supply voltage
Cut off / Min speed 45% of supply voltage
for 50Hz
35% of supply voltage
for 60Hz
Ease of setting
and adjusting
The easily accessible adjusting screw is situated on the top surface
of XGE. The direction to turn the screw for decrease or increase
in the setting pressure is indicated by arrow markings next to the
adjusting screw.
Every turn of the adjusting screw corresponds to a specified
Series 360o = 1 turn
change in the setting value. A punch hole on the adjusting screw XGE - 4 approx. 1,2 bar
helps keep track of the number of turns made. XGE - 6 approx. 1,6 bar
Compact and
light-weight
The compact design of XGE provides versatile
installation possibilities where space is at a
premium. The horizontal space occupied by
XGE, in any orientation, is equivalent to a
circular diameter of only 66mm.
The height of the contoller is 90mm, and
when the plug is fitted, only 112mm of vertical
space is occupied. Combined with the light
weight (180g), the XGE is ideally suited for
installation on refrigeration lines without
excess stress on the pipework.
112mm
max speed
ø 66mm
Hz
Hz
50
effective voltage R.M.S. (V%)
Wide application
60
V@
V@
230
possibilities
230
min speed
Code Catalogue Factory set Adjusting range Prop. band
Refrigerant Mode
number number [bar] [bar] [bar]
cut off
prop.band
061H3140 XGE-4C 19 R22, R134a, R404A, R407C 10-25 6 cut-off
061H3160 XGE-6C 28 R410A 22-39 7 cut-off
061H3240 XGE-4M 19 R22, R134a, R404A, R407C 10-25 6 min speed
pressure [bar]
061H3260 XGE-6M 28 R410A 22-39 7 min speed set point
Installation flexibility
The XGE is designed to be directly In cases where space is even more
mounted onto the refrigeration line limited, XGE can be fixed onto a simple
making the most of free space in a bracket (supplied as an accessory) and
unit. screwed to a panel.
Direct mount Panel mount
Panel mounting bracket
Code number Catalogue number
061H3102 XGE-AE01
Easy wiring
and electrical connection
Electrical connection of XGE to the fan motor is
simple and easy.
With the use of a square “quick connect” plug, the
connection is possible in 4 different directions, allowing
many different machine configurations to accommodate
XGE, depending on the position of the fan motor and
orientation needed for the electrical cable.
For wiring, a simple diagram
is embossed onto the XGE sur-
face and also indicated on the
plug.
Danfoss Saginomiya Sp. z o.o.
ul. Chrzanowska 5; 05-825 Grodzisk Mazowiecki Poland
Phone +48 (22) 7550 500, Fax +48 (22) 7550 505
info@danfoss-saginomiya.com, www.danfoss-saginomiya.com
Danfoss Saginomiya Sp. z o.o. can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss
Saginomiya Sp. z o.o. reserves the right to alter its products without notice. This also applies to products already on order, provided that such
alteration can be made without subsequential changes being necessary in specifications already agreed. All trademarks in this material are
property of the respective companies. Danfoss Saginomiya and the Danfoss Saginomiya logotype are trademarks of Danfoss Saginomiya
Sp. z o.o. All rights reserved.
PLRCA.PB.LC0.A1.02
