Scribd
Upload
215 views1 page

Maxisys Vehicle Diagnostic Report

The diagnostic report is for a 2009 Ford Explorer with 4.0L engine and mileage unknown. The report found faults with the Powertrain Control Module which had 4 diagnostic trouble codes, and the Generic Electronic Module/Smart Junction Box which had 2 diagnostic trouble codes. In total there were 6 diagnostic trouble codes between the two systems, indicating issues with the vehicle's fuel and evaporation systems, as well as electrical faults with the illumination switch and less than two transmitters programmed.

Uploaded by

wnsd
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
215 views1 page

Maxisys Vehicle Diagnostic Report

The diagnostic report is for a 2009 Ford Explorer with 4.0L engine and mileage unknown. The report found faults with the Powertrain Control Module which had 4 diagnostic trouble codes, and the Generic Electronic Module/Smart Junction Box which had 2 diagnostic trouble codes. In total there were 6 diagnostic trouble codes between the two systems, indicating issues with the vehicle's fuel and evaporation systems, as well as electrical faults with the illumination switch and less than two transmitters programmed.

Uploaded by

wnsd
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

MaxiSys Vehicle Diagnostic Report

Vehicle information
Ford 2009 Explorer
VIN: Mileage:
Diagnostics time: 2020/08/26 15:07 Path: Manual selection > Ford > Explorer > 4.0L > 2V > 2009 >
Equipped > Diagnosis > Auto scan >

Status report
System name DTC counts Status

PCM(Powertrain Control Module) 4 Fault

ABS(Antilock braking system) 0 Pass

RCM(Restraint Control Module) 0 Pass

OCSM(Occupant Classification System Module) 0 Pass

IC(Instrument Cluster) 0 Pass

GEM / SJB(Generic Electronic Module / Smart Junction Box) 2 Fault

1. PCM(Powertrain Control Module) —— ( 4 )


1.1. P0174-FF System Too Lean Bank 2
CMDTCs

EVAP(Evaporative Emission System) control system vent control valve circuit


1.2. P0446-FF malfunction.
CMDTCs

1.3. P0451-FF Evaporative emission control system malfunction


CMDTCs

1.4. P1000-FF Check of all systems is not complete since last memory clear.
CMDTCs

2. GEM / SJB(Generic Electronic Module / Smart Junction Box) —— ( 2 )


2.1. B2121-60 Illumination Switch Short to Battery
CMDTCs

2.2. B2276-60 Less Than Two Transmitters Programmed


CMDTCs

www.autel.com Page 1

You might also like