Guia de Proceso Aerosoles

Hasta el doble de cobertura

en comparación con la Producto Descripción Tipo Part Number

competencia * SKC-S Non-halogenated Solvent Cleaner I & II* 01-5750-78

SKL-WP2 Water Washable Visible Dye Penetrant II 01-5190-78

Visible
Liquid Penetrant Inspection
Magnaflux
Aerosols 2x coverage SKL-SP2 Post-emulsifiable Visible Dye Penetrant II 01-5155-78

SKD-S2 Solvent based Developer I & II* 01-5352-78

Competitor
Aerosols ZL-60D Water Washable Penetrant, Level 2 I 01-3272-78
Fluorescent

ZL-27A Post-Emulsifiable Penetrant, Level 3 I 01-3187-78

Reduce el riesgo de ZL-37 Post-Emulsifiable Penetrant, Level 4 I 01-3188-78

indicaciones falsas ZP-9F Solvent Based Developer I & II* 01-3354-78

7HF Oil-Based Visible Magnetic Particle Suspension - 01-1580-78

Magnetic Particle
Inspection

WCP-2 Solvent Based White Contrast Paint - 01-2250-78

14A Aqua-Glo Water-Based Fluorescent Magnetic Particle Suspension - 01-1725-38

14AM Oil-Based Fluorescent Magnetic Particle Suspension - 01-0145-78

Aerosoles Magnaflux Aerosoles de la competencia
*For use with Type I & II Penetrants

Visible or Fluorescent Liquid Penetrant Testing

1. Clean part 2. Apply penetrant 3. Remove excess 4. Apply developer 5. Inspect
Use an NDT approved Dwell for 10-30 minutes penetrant Dwell for 10-60 minutes Use a UV lamp for
cleaner like SKC-S Apply cleaner on cloth and fluorescent inspections
Visible Fluorescent
then wipe the part
Visible Fluorescent

ZL-27A
Fluorescent Level 3
Penetrant

SKC-S SKL-SP2 ZL-37 SKC-S SKD-S2 ZP-9F

Nondestructive Fluorescent Level 4 Nondestructive
Visible Penetrant Developer Developer
Testing Material Penetrant Testing Material

Ensayo de Partículas Magnéticas Visibles

1. Limpie la pieza 2. Aplique pintura de 3. Posicione el Yugo y 4. Aplique Partículas 5. Inspecione
contraste magnetice Magnéticas Busque discontinuidades
Utilice un limpiador aprobado para NDT
Coloque el yugo sobre el área de Desconecte la corriente después de aplicar perpendiculares al yugo
como SKC-S Cree una superficie brillante y mate
prueba y aplique corriente partículas
con WCP-2

SKC-S WCP-2 7HF

Nondestructive
White Contrast Paint Magnetic Particle
Testing Material

Ensayo de Partículas Magnéticas Fluorescentes

1. Clean part 2. Position and 3. Apply magnetic particles 4. Inspect
Use an NDT approved magnetize yoke Switch off current after Look for discontinuities
cleaner like SKC-S Position yoke over test area applying particles perpendicular to yoke
and apply current

SKC-S 14A AQUA-GLO 14AM

Nondestructive Water Based Oil Based
Testing Material Magnetic Particle Magnetic Particle

* Compared to NDT Liquid Penetrant Competitors See our aerosol research on magnaflux.com/aerosols