Scribd
Upload
914 views1 page

Series: K5V 200 DT H 100 R 9N 01

With the K5V series, increased power density has been enabled through new technology. The K5V series comes in various displacement sizes from 80cm3 to 200cm3. Key specifications of the K5V series pumps include rated pressure of 34.3MPa for the K5V80 up to 39.2MPa for the K5V200, maximum speed of 2,460 to 3,000 min-1 depending on the model, and maximum input torques ranging from 529N·m for the K5V80 to 1,120N·m for the K5V200.

Uploaded by

Stelian Crisan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
914 views1 page

Series: K5V 200 DT H 100 R 9N 01

With the K5V series, increased power density has been enabled through new technology. The K5V series comes in various displacement sizes from 80cm3 to 200cm3. Key specifications of the K5V series pumps include rated pressure of 34.3MPa for the K5V80 up to 39.2MPa for the K5V200, maximum speed of 2,460 to 3,000 min-1 depending on the model, and maximum input torques ranging from 529N·m for the K5V80 to 1,120N·m for the K5V200.

Uploaded by

Stelian Crisan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

SERIES

With new technology the K5V series has enabled increased


power density.

•Variation of pump displacement

K3V 63 112 140 180 280

K5V
K5V80 K5V140 K5V200
0 50 100 150 200 250 300
3
Displacement (cm )

ORDERING CODE
K5V 200 DT H 100 R 9N 01
K5V series Design code of regulator

Displacement
Regulator code
80 : 80 cm3
140 : 140cm3
200 : 200cm3 Direction of rotation
Clockwise
DT: Double pump (Tandem type) Counterclockwise
(viewed from shaft end)
DP: Double pump (Parallel type)
Desigh code
S : Single pump

Standard
H : with Centrifugal pump
P : with PTO

1MPa = 10.197kgf/cm2
SPECIFICATIONS 1N·m = 0.10197kgf·m
1. Pressure to which guarantee of
Size 80 140 200 performance, functions or ser-
vice life is applied. Durability is
Displacement (cm3) 80 140 200 unlimited (except for the bear-
ing life).
1 Rated 34.3
Pressure 2. At max. displacement. In case
of engine driving, max. idling
(MPa) Peak 39.2 speed should be below this val-
1,900 4 ue. This suction pressure should
2
Speed Max. for self priming 2,460 2,160 (2,200) be -0.0 1MPa and above.
(min-1) 3 3. Suction pressure should be
Max. 3,000 2,500 2,200 above 0.1MPa.
Max. input torque of tandem pump (N·m) 529 843 1,120 4. Max. speed with centrifugal
pump
Max. input torque of attached gear pump with PTO (N·m) 125 294 5. When other kinds of fluid would
be used, please consult with
Mass Single 48 68 86 us.

(kg) Tandem 81 125 160


Type 5 Antiwear hydraulic fluid
Oil temperature range - 20 ~ + 95 °C
Hydraulic
Oil viscosity range 10 ~ 1,000 mm2/S (cSt)
fluid
Suction line 80 ~ 150 mesh
Filtration
Return line nominal 10 micron meter

You might also like