Scribd
Upload
38 views1 page

Can Be Used When Available With Appropriate Diesel Rating

The document provides specifications for engine oil, fuel, coolant, hydraulic fluid, and gear lube for a diesel engine. It details the required quantities and mixtures for each fluid type, including recommendations for coolant freeze protection. Additionally, it outlines maintenance intervals for engine oil changes based on contamination levels.

Uploaded by

ИлиянВасилев
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
38 views1 page

Can Be Used When Available With Appropriate Diesel Rating

The document provides specifications for engine oil, fuel, coolant, hydraulic fluid, and gear lube for a diesel engine. It details the required quantities and mixtures for each fluid type, including recommendations for coolant freeze protection. Additionally, it outlines maintenance intervals for engine oil changes based on contamination levels.

Uploaded by

ИлиянВасилев
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Engine Oil *Use SAE 3.4 qts.

Viscosity (LUBRICATION OILS FOR DIESEL ENGINE CRANKCASE) (3,2 L)


Number as
Listed With API
Classification
CD or Better

Dealer Copy -- Not for Resale


*Can be used when available with appropriate diesel rating
Fuel *Diesel Fuel 7.3 gal.
(27,3 L)

Coolant Propylene Add premixed coolant; 47% water and 53% 6.0 qts.
Glycol to the recovery tank if the coolant level is low. One gallon and (5,7 L)
one pint of propylene glycol mixed with one gallon of water is
the correct mixture of coolant to provide a -34° F (-37° C)
freeze protection. Check condition with a refractometer.

Hydraulic Bobcat Fluid P/N 6903117 - 2.5 gal. (9,5 L) Tank Cap.
P/N 6903118 - 5 gal. (18,9 L) 6.8 qts. (6,5 L)
P/N 6903119 - 55 gal. (208 L) System Cap.
19.6 qts. (18,5 L)
Drive Motors Gear Lube SAE - 90W 0.32 qts.
(each side) (0,3 L)

0.5% or Less Change engine oil and filter as shown on the Service Schedule. (See SERVICE SCHEDULE on
Page 10-50-1.)
0.5% - 1.0% Use 1/2 of Service Schedule interval.
Above 1.0% Use 1/4 of Service Schedule interval

709 of 730

You might also like