Scribd
Upload
327 views3 pages

Brochure Promix - Suremix

Tchem Vietnam Co., LTD provides processing aids for the rubber industry including Promix 400, SureMix S6, SureMix S8, and SureMix CO2. These processing aids are added during the mixing process and provide benefits such as improving mold flow, reducing nerve and shrinkage, facilitating blending of dissimilar elastomers, reducing mixing cycle time and viscosity, and enhancing tensile properties and dynamic stiffness while maintaining hysteresis. The processing aids allow optimization of the mixing process to improve compound properties and processability.

Uploaded by

Phuong The Nguyen
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
327 views3 pages

Brochure Promix - Suremix

Tchem Vietnam Co., LTD provides processing aids for the rubber industry including Promix 400, SureMix S6, SureMix S8, and SureMix CO2. These processing aids are added during the mixing process and provide benefits such as improving mold flow, reducing nerve and shrinkage, facilitating blending of dissimilar elastomers, reducing mixing cycle time and viscosity, and enhancing tensile properties and dynamic stiffness while maintaining hysteresis. The processing aids allow optimization of the mixing process to improve compound properties and processability.

Uploaded by

Phuong The Nguyen
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Tchem Vietnam Co.

, LTD
HQ: 41/1A Quang Trung Str, Ward 10, Go Vap Dist, HCMC
Office: 205B Hoang Hoa Tham Str, Ward 6, Binh Thanh Dist, HCMC
Ph: +84 8 6258 0586, Fax: +84 8 6258 0486
www.tchemgroup.com

PROCESSING AIDS

TYPICAL
No Grades Applications Advantages
CHARACTERISTICS

I Promix 400 General processing and dispersion aid for 3 - 15 PHR, add with  Improves mold flow and extrusion
most synthetic and natural elastomers. polymers at the beginning characteristics.
Promix - 400 is especially effective as a of mix cycles  Reduces nerve and shrinkage.
homogenizing agent for dissimilar  Facilitates blending of elastomers of
elastomers dissimilar polarities.
 Improves filler incorporation.
 Reduces mixing cycle time, energy
consumption and viscosity.
 Enhances green tack.
II SureMix S6 High performance process aid for silica 3 - 5 phr added into first mix  Developed for OEM and replacement market
reinforced rubber compounds used to pass silica tread compounds
optimize processability and maintain  Optimize mixing to reduce number of mix
compound properties. passes or cycle times

 Best in class scorch safety, viscosity


SureMix - S6 provides best in class
reduction and extrusion smoothness

Trang 1/3
Tchem Vietnam Co., LTD
HQ: 41/1A Quang Trung Str, Ward 10, Go Vap Dist, HCMC
Office: 205B Hoang Hoa Tham Str, Ward 6, Binh Thanh Dist, HCMC
Ph: +84 8 6258 0586, Fax: +84 8 6258 0486
www.tchemgroup.com

processability and storage stability  Best in class compound storage stability –


minimal change in viscosity with time

 Maintains compound modulus and dynamic


stiffness better than conventional process
aids
III SureMix S8 High performance process aid for silica 3 - 5 phr added into first mix  Developed for OEM and replacement market
reinforced rubber compounds used to pass silica tread compounds
optimize processability and enhance  Enhances low strain dynamic stiffness while
compound properties. maintaining or improving compound
hysteresis
SureMix S8 provides improved  Lower viscosity and smoother extrusion
processability, excellent storage stability  Improved compound storage stability –
and superior dynamic stiffness minimal change in viscosity with time
 Superior retention of tensile modulus
 Activates cure allowing for reduced loading of
secondary accelerator
 Particularly effective at low silica loadings
where enhanced dynamic stiffness is needed
in ultra-low rolling resistance applications

IV SureMix CO2 High Performance process aid for silica 3 - 5 phr added into first mix  Developed for highly loaded OEM and

Trang 2/3
Tchem Vietnam Co., LTD
HQ: 41/1A Quang Trung Str, Ward 10, Go Vap Dist, HCMC
Office: 205B Hoang Hoa Tham Str, Ward 6, Binh Thanh Dist, HCMC
Ph: +84 8 6258 0586, Fax: +84 8 6258 0486
www.tchemgroup.com

reinforced rubber compounds used to pass replacement market silica tread compounds
optimize processability and enhance  Provides faster cure, improved tensile
compound properties. properties and lower hysteresis
 Optimize mixing to reduce number of mix
SureMix CO2 provides fast cure, enhances passes or cycle times
tensile properties, reduces hysteresis and  Superior viscosity reduction and extrusion
provides best in class processability smoothness
 Improved compound storage stability –
minimal change in viscosity with time

Trang 3/3

You might also like