Scribd
Upload
2K views1 page

MID 164, PPID 394 Power Supply, Starter Switch: MID 164: HCU Fault Code

The document summarizes an electrical system malfunction with MID 164 and PPID 394 related to the power supply for the starter switch. Fault codes FMI 3 and 4 indicate issues with the voltage being too high or low compared to normal levels and point to a problem with the power supply to the starter switch. The symptoms include an inability to start the engine and no lighting in the start/stop panel, with an orange lamp flashing in the alarm panel as a fault indication.

Uploaded by

user1
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views1 page

MID 164, PPID 394 Power Supply, Starter Switch: MID 164: HCU Fault Code

The document summarizes an electrical system malfunction with MID 164 and PPID 394 related to the power supply for the starter switch. Fault codes FMI 3 and 4 indicate issues with the voltage being too high or low compared to normal levels and point to a problem with the power supply to the starter switch. The symptoms include an inability to start the engine and no lighting in the start/stop panel, with an orange lamp flashing in the alarm panel as a fault indication.

Uploaded by

user1
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Group 30: Electrical system Malfunctions, MID 164

MID 164, PPID 394


Power supply, starter switch

MID 164: HCU


Fault code
FMI 3: The voltage exceeds the normal value or is
short circuited to higher voltage.
FMI 4: The voltage is less than the normal value or is
short circuited to battery negative.

FMI Fault code explanation


3, 4 Fault in power supply to starter switch

Fault indication
An orange lamp flashes in the alarm panel.

Symptom
Impossible to start the engine.
No lighting in start/stop panel (if one is installed).

Cable description
POWER SUPPLY (30)

STARTER MO-
TOR

15 +

STOP

Marking sleeve Marking sleeve


(gray) ”START/STOP KEY”
”CONN. X4”

121

You might also like