Product Data Sheet
85-60
PRODUCT DESCRIPTION
TECHNICAL SPECIFICATION
STARBOND 85-60 is a water-based contact adhesive,
formulated with good open tack. It is LOW VOC product and Base Synthetic resin
recommended for bonding of insulating material to metal
Color Cream
sheet, concrete, wood, PVC and other plastics.
Viscosity, Cps
APPLICATION 10,000 - 20,000
@25ºC, S6, rpm 20
It is recommended for HVAC application and insulation Density, kg/L 1.10 – 1.30
foam adhesive
It is a rapid set water-based adhesive, designed for Coverage, m 2/L 4.5 – 7.5
bonding low density duct liner, duct wrap and fibrous
glass
It is recommended for painted or unpainted steel, Open Time, minute 10 – 30
galvanized or aluminum surfaces
It is a solvent free, very low VOC synthetic elastomeric Volatile Organic
emulsion Compound, g/L <2
(EPA Method 24)
Non-flammable when wet and fire-resistive when dry
Clean all tools immediately with
It is ideal for bonding fibrous glass insulation to
concrete, block and other masonry surfaces in building Cleaning warm water
construction
It contains no asbestos, lead or mercury compounds Flashpoint Non-Flammable
Solid content,% 53 ± 2
ADVANTAGES
Environmentally safe HEALTH & SAFETY
Easy application As with all chemicals, caution should always be exercised.
Quick setting Protective clothing such as gloves and goggles should be
Suitable for most surfaces worn.
Good coverage
INHALATION: Inhalation of vapor or mist should be
Heat resistant
avoided. If inhaled symptoms include coughing,
Water resistant
wheezing, laryngitis, and shortness of breath, headache,
Non-flammable nausea, and vomiting. Immediately shift victim to fresh air,
and, if needed immediately start artificial respiration. Give
oxygen if breathing is labored. Get emergency medical
DIRECTIONS FOR USE help.
EYE CONTACT: Flush eyes with water for 15 minutes and
The surface has to be leveled, sound, dry and clean call for medical help.
(accordingly to BS 8203). Apply the adhesive uniformly on
the substrate using a fine trowel, brush or roller. Allow the INGESTION: Causes nausea, vomiting, and loss of
adhesive to set for approx. 15-20 minutes to become tacky, consciousness. If accidentally swallowed do not induce
then lay the substrate to be adhered. vomiting rather call for medical help immediately.
SKIN CONTACT: Flush with water or soap and water until
STORAGE all traces have been removed. Seek medical attention if
required.
WARRANTY:
Stored tightly closed in a well-ventilated area between The information given is based on our knowledge and
5oC to 39 °C. Keep away from direct sunlight performance of the material. Every precaution is taken in
Store away from ignition sources the manufacture of the product and responsibility is limited
Stirring is recommended before use to the quality of supplies with no guarantee of results in the
UAE KSA INDIA
Tel. +971 6 5611411 Tel. +996 12 677 7073 Tel. +91 260 2220241
uae@star-uae.com ksa@star-uae.com india@star-uae.com
www.star-uae.com www.star-uae.com www.star-uae.com
Product Data Sheet
85-60
field, as manufacturer has no control over site conditions or
execution of work.
UAE KSA INDIA
Tel. +971 6 5611411 Tel. +996 12 677 7073 Tel. +91 260 2220241
uae@star-uae.com ksa@star-uae.com india@star-uae.com
www.star-uae.com www.star-uae.com www.star-uae.com
