1/2

Odolo, 13/09/2021
UC/FG/tc/EXP

To SICIM S.p.A.
Milano EPC Office
Attn: Ms Liane Longhi
Email: l.longhi.ext@sicim.eu

SUBJECT: YOUR ENQUIRY REFERENCE SA010-MR-005-Rev. A_012

PROJECT: UPGRADE UTHMANIYAH-ABQAIQ PIPELINES SYSTEMS
PROJECT SA010

MANUAL BALL VALVES

OMS OFF10620_A
Dear Sirs,

Following receipt of your a/m enquiry dated 21/08/2021, we are pleased to submit you our
quotation for manual ball valves as per attached list.

TERMS AND CONDITIONS

CURRENCY EURO

DELIVERY TIME (FCA BIONE 30 – 32 calendar weeks from P.O.

BASIS) Anyway, to be agreed during negotiations.

DELIVERY POINT FCA - OMS SALERI, BIONE (BS) ITALY

*For any exported goods the Italian customs formalities
will be at our care and cost

PACKING (SEAWORTHY TYPE) Extra price: QUOTED

 2/2

FOB IT. PORT (Genova/La Spezia) Extra price: QUOTED

PAYMENT TERMS To be agreed.

OFFER VALIDITY 120 Days

3.1 CERT./DOC./TESTING Included in unit prices.

NDT Included in unit prices.

PMI Included in unit prices.

FERRITE TEST Included in unit prices.

PAINTING Included in unit prices.

SPARE PARTS Commissioning and Start-up: N/A

2/years: a detailed list shall be submitted only after order

placement. Anyway, we recommend a quantity of spare
parts related to 10% of P.O. valves (min. q.ty 1).
Lump sum is estimated as 10% of valves value.

COUNTRY OF MADE IN ITALY

MANUFACTURING

Other terms and conditions will be mutually agreed during negotiations.

Best Regards

Attachments:

1. Valve list
2. Technical documents
Customer: SICIM SPA (OMS SALERI SAUDIA) OMS Offer n°: OFF10620
Project: ENGINEERING, PROCUREMENT & CONSTRUCTION FOR UPGRADE UTHMANIYAH-ABQAIQ PIPELINES SYSTEMS Revision: A
Enquiry n°: SA010-MR-005-Rev. A_012 Date: 13/9/2021
dP FOR
DATA OMS OPERATI ACTUAT INSPECTI
CLIENT FLANGE BORE *VALVE BODY/FL SEAT SEAT PAINT SERVICE LEAKAG UNIT
ITEM TAG PED CAT SHEET PIP CL CLASS ENDS BORE VALVES HEAD BALL STEM SEALS STUDS NUTS QTY NG OR ON NOTES EXTENDE
CODE SIZE (in) SIZE (in) TYPE ANGES UNIT INSERT SYSTEM CLASS E RATE PRICE
NO MODEL SYSTEM SIZING CLASS D PRICE
APCS-26 (BAR)
9COM ISOLATIO PE- A182 ASTM ON
S7100.T.S A350 LF2 A350 LF2 A351 A479 TP VITON A194 Gr. SOUR ZERO
A1.1.1 N/A 60000002 N 530101.03 6CS1P02 18 18 600 RF FULL 2 F316/F31 RPTFE A320 Gr. 1 GEAR CARBON N/A LEVEL 3 7,16) UOTED
F.600 CL.1 CL.1 CF8M 316/316L GLT AED 7M (S3) CRUDE LEAKAGE
50 VALVES 5 6L L7M STEEL
PARTS.
APCS-26
9COM ISOLATIO A182 A182 ASTM ON
S7100.T.S A350 LF2 A350 LF2 A479 TP VITON A194 Gr. SOUR ZERO
A1.1.2 N/A 60000002 N TBA N/A 2 2 600 RF FULL 2 F316/F31 F316/F31 RPTFE A320 Gr. 4 LEVER CARBON N/A LEVEL 3 16) UOTED
F.600 CL.1 CL.1 316/316L GLT AED 7M (S3) CRUDE LEAKAGE
50 VALVES 6L 6L L7M STEEL
PARTS.
APCS-26
9COM ISOLATIO PE- A182 ASTM ON
S7100.T.S A350 LF2 A350 LF2 A351 A479 TP VITON A194 Gr. SOUR ZERO
A1.2.1 N/A 60000002 N 530101.02 3LE0P02 12 12 300 RF FULL 2 F316/F31 RPTFE A320 Gr. 1 GEAR CARBON N/A LEVEL 3 1,3,16) UOTED
F.300 CL.1+FBE CL.1+FBE CF8M 316/316L GLT AED 7M (S3) CRUDE LEAKAGE
50 VALVES 6 6L L7M STEEL
PARTS.
APCS-26
9COM ISOLATIO PE- A182 ASTM ON
S7100.T.S A350 LF2 A350 LF2 A351 A479 TP VITON A194 Gr. SOUR ZERO
A1.2.2 N/A 60000002 N 530101.02 3LE0P02 20 20 300 RF FULL 2 F316/F31 RPTFE A320 Gr. 2 GEAR CARBON N/A LEVEL 3 1,3,16) UOTED
F.300 CL.1+FBE CL.1+FBE CF8M 316/316L GLT AED 7M (S3) CRUDE LEAKAGE
50 VALVES 6 6L L7M STEEL
PARTS.
APCS-26
9COM ISOLATIO PE- A182 ASTM ON
S7100.T.S A350 LF2 A350 LF2 A351 A479 TP VITON A194 Gr. SOUR ZERO
A1.2.3 N/A 60000002 N 530101.02 3LE0P02 24 24 300 RF FULL 2 F316/F31 RPTFE A320 Gr. 6 GEAR CARBON N/A LEVEL 3 1,3,16) UOTED
F.300 CL.1+FBE CL.1+FBE CF8M 316/316L GLT AED 7M (S3) CRUDE LEAKAGE
50 VALVES 6 6L L7M STEEL
PARTS.
APCS-26
9COM ISOLATIO PE- A182 ASTM ON
S7100.T.S A350 LF2 A350 LF2 A351 A479 TP VITON A194 Gr. SOUR ZERO
A1.3.1 N/A 60000002 N 530101.03 3CS1P02 16 16 300 RF FULL 2 F316/F31 RPTFE A320 Gr. 2 GEAR CARBON N/A LEVEL 3 7,16) UOTED
F.300 CL.1 CL.1 CF8M 316/316L GLT AED 7M (S3) CRUDE LEAKAGE
50 VALVES 2 6L L7M STEEL
PARTS.
APCS-26
9COM S7100.T.S A182 ASTM ON
HOT TAP A350 LF2 A350 LF2 A351 A479 TP VITON A194 Gr. SOUR ZERO 1,3,16,25,
B1.1.1 N/A 60000002 TBA N/A 20 20 300 RF FULL F.300.SP/ 2 F316/F31 RPTFE A320 Gr. 1 GEAR CARBON N/A LEVEL 3 UOTED
VALVES CL.1+FBE CL.1+FBE CF8M 316/316L GLT AED 7M (S3) CRUDE LEAKAGE 26,28,29)
50 EP 6L L7M STEEL
PARTS.
APCS-26
9COM S7100.T.S A182 ASTM ON
HOT TAP A350 LF2 A350 LF2 A351 A479 TP VITON A194 Gr. SOUR ZERO 1,3,16,25,
B1.1.2 N/A 60000002 TBA N/A 24 24 300 RF FULL F.300.SP/ 2 F316/F31 RPTFE A320 Gr. 2 GEAR CARBON N/A LEVEL 3 UOTED
VALVES CL.1+FBE CL.1+FBE CF8M 316/316L GLT AED 7M (S3) CRUDE LEAKAGE 26,28,29)
50 EP 6L L7M STEEL
PARTS.
APCS-26
9COM ISOLATIO PE- A350 LF2 A182 ASTM ON
S7100.T.S A350 LF2 A350 LF2 A479 TP VITON A194 Gr. SOUR ZERO
A2.1.1 N/A 60000124 N 530101.02 3LE0P02 30 30 300 RF FULL 2 CL.1+316 F316/F31 RPTFE A320 Gr. 4 GEAR CARBON N/A LEVEL 3 1,3,5,16) UOTED
F.300 CL.1+FBE CL.1+FBE 316/316L GLT AED 7M (S3) CRUDE LEAKAGE
20 VALVES 7 L 6L L7M STEEL
PARTS.
APCS-26
9COM ISOLATIO PE- A350 LF2 A182 ASTM ON
S7100.T.S A350 LF2 A350 LF2 A479 TP VITON A194 Gr. SOUR ZERO
A2.1.2 N/A 60000124 N 530101.02 3LE0P02 40 40 300 RF FULL 2 CL.1+316 F316/F31 RPTFE A320 Gr. 1 GEAR CARBON N/A LEVEL 3 1,3,5,16) UOTED
F.300 CL.1+FBE CL.1+FBE 316/316L GLT AED 7M (S3) CRUDE LEAKAGE
20 VALVES 7 L 6L L7M STEEL
PARTS.
APCS-26
9COM S7100.T.S A350 LF2 A182 ASTM ON 1,3,5,16,2
HOT TAP A350 LF2 A350 LF2 A479 TP VITON A194 Gr. SOUR ZERO
B2.1.1 N/A 60000124 TBA N/A 30 30 300 RF FULL F.300.SP/ 2 CL.1+316 F316/F31 RPTFE A320 Gr. 4 GEAR CARBON N/A LEVEL 3 5,26,28,29 UOTED
VALVES CL.1+FBE CL.1+FBE 316/316L GLT AED 7M (S3) CRUDE LEAKAGE
20 EP L 6L L7M STEEL )
PARTS.
APCS-26
9COM ISOLATIO PE- A182 ASTM ON
S7100.SF. A350 LF2 A350 LF2 A479 TP VITON A194 Gr. SOUR ZERO
A3.1.1 N/A 60000002 N 530101.03 3CS1P02 2 2 300 RF FULL 1 F316/F31 - RPTFE A320 Gr. 2 LEVER CARBON N/A LEVEL 3 16) UOTED
300 CL.1 CL.1 316/316L GLT AED 7M (S3) CRUDE LEAKAGE
39 VALVES 1 6L L7M STEEL
PARTS.
APCS-26
9COM ISOLATIO PE- A182 ASTM ON
S7100.SF. A350 LF2 A350 LF2 A479 TP VITON A194 Gr. SOUR ZERO
A3.2.1 N/A 60000002 N 530101.03 3CS1P02 2 2 300 RF FULL 1 F316/F31 - RPTFE A320 Gr. 2 LEVER CARBON N/A LEVEL 3 16) UOTED
300 CL.1 CL.1 316/316L GLT AED 7M (S3) CRUDE LEAKAGE
39 VALVES 1 6L L7M STEEL
PARTS.
APCS-26
9COM ISOLATIO PE- A182 ASTM ON
S7100.SF. A350 LF2 A350 LF2 A479 TP VITON A194 Gr. SOUR ZERO
A3.3.1 N/A 60000002 N 530101.03 3CS1P02 2 2 300 RF FULL 1 F316/F31 - RPTFE A320 Gr. 4 LEVER CARBON N/A LEVEL 3 16) UOTED
300 CL.1 CL.1 316/316L GLT AED 7M (S3) CRUDE LEAKAGE
39 VALVES 1 6L L7M STEEL
PARTS.
9COM ISOLATIO A182 A182
B3.1.1 S7100.SF. A351 A479 TP VITON A194 8M NO SOUR ZERO
N/A 60000002 N TBA N/A 2 2 150 RF FULL 1 F316/F31 F316/F31 - RPTFE A193 B8M 24 LEVER N/A LEVEL 3 16) UOTED
(HOLD) 150 CF8M 316/316L GLT AED CL.1 COATING CRUDE LEAKAGE
39 VALVES 6L 6L

TOTAL
60
VALUE

Page 1 of 4
Customer: SICIM SPA (OMS SALERI SAUDIA) OMS Offer n°: OFF10620
Project: ENGINEERING, PROCUREMENT & CONSTRUCTION FOR UPGRADE UTHMANIYAH-ABQAIQ PIPELINES SYSTEMS Revision: A
Enquiry n°: SA010-MR-005-Rev. A_012 Date: 13/9/2021
dP FOR
DATA OMS OPERATI ACTUAT INSPECTI
CLIENT FLANGE BORE *VALVE BODY/FL SEAT SEAT PAINT SERVICE LEAKAG UNIT
ITEM TAG PED CAT SHEET PIP CL CLASS ENDS BORE VALVES HEAD BALL STEM SEALS STUDS NUTS QTY NG OR ON NOTES EXTENDE
CODE SIZE (in) SIZE (in) TYPE ANGES UNIT INSERT SYSTEM CLASS E RATE PRICE
NO MODEL SYSTEM SIZING CLASS D PRICE
(BAR)

NOTES

1) THE VALVES SHALL BE INTERNALLY FBE COATED AS PER SYSTEM APCS 102B OF SAES-H-002 \ 09-SAMSS-091 AS PER MATERIAL REQUISITION. ACCORDING TO DOC. 04-SAMSS-048 PARA. 4.2 ALL VALVES (CAST AND FORGED)

SHALL BE SHELL TESTED BEFORE AND AFTER APPLICATION OF THE COATING OR LINING.

3) AS PER PARA 10.2 OF DOC. 04-SAMSS-035 CRITICAL AREAS INCLUDE PRESSURE CONTAINING SEAL AREAS (STATIC AND DYNAMIC SEALING AREAS) , SEATING POCKETS/FACES, PRESSURE BOUNDARY PENETRATION CONNECTIONS, AND SURFACES

AREAS BETWEEN INJECTION FITTINGS AND SEAT/STEM POCKETS SHALL BE OVERLAYED WITH SS316L OVERLAY. SAME OVERLAY SHALL BE APPLICABLE ON ALL WETTED PARTS IN NOT CORROSION RESISTANCE MATERIALS WHERE FBE COATING IS NOT FEASEABLE OR EASLY TO BE APPLICABLE

DISCONTINUITIES IN CORROSION PROTECTION ARE NOT PERMITTED, INTERFACE AREAS BETWEEN COATING AND CORROSION RESISTANT MATERIAL SHALL INCLUDE OVERLAPS.

5) IN ORDER TO PROPOSE A BETTER TECHNICAL AND COMMERCIAL PROPOSAL BALL IS REQUIRED IN CLADDED EXECUTION (A105N PLUS SS316L OVERLAY) IN LIEU OF SOLID SS316L EXECUTION. PLEASE ADVISE IF OUR SOLUTION IS NOT ACCEPTABLE FOR YOUR SIDE

7) AS PER DOC. 04-SAMSS-051 PARA 6.11 BEING VALVES 8" AND ABOVE CRITICAL AREAS SUCH AS SEAT POCKETS, STEM SEAL HOUSING AND OTHER DYNAMIC SEAL AREAS SHALL BE OVERLAID WITH SS316L. MINIMUM THICKNESS OF OVERLAY SHALL BE 3 mm

16) ALL WETTED MATERIALS WILL BE SUPPLIED ACCORDING TO SPEC. NACE MR01-75/ISO 15156(SOUR SERVICE)

25) THE VALVES SHALL BE SUPPLIED WITH ONE SEAT DOUBLE PISTON EFFECT DESIGN AND THE OTHER SEAT SELF RELIEVING DESIGN (DIB-2 CONFIGURATION OF API 6D)

26) WE UNDERLINE THAT THESE VALVES ARE BIDIRECTIONAL FOR SEALING, BUT UNIDIRECTIONAL FOR INSTALLATION. BODY TO BE MARKED ACCORDINGLY

28) ACCORDING TO MATERIAL REQUISITION, THE VALVE SHALL BE FOR SUITABLE FOR HOT TAP SERVICE. NOT BEING OTHERWISE SPECIFIED INTERNAL DIAMETER SHALL BE CONSIDERED AS PER API 6D SPECIFICATION

WE CONSIDER THE TAPPING MACHINE AND ALL OTHERS ACCESSORIES NECESSARY FOR THE TAPPING ACTIVITIES OUTSIDE OF OUR SCOPE OF SUPPLY. PLEASE NOTE

29) THE VALVES WILL BE SUPPLIED SUITABLE FOR HORIZONTAL INSTALLATION

GENERAL NOTES

A) WE RESERVE THE RIGHT TO UPDATE OUR BID SHOULD ANY SPECIFICATIONS, STANDARDS, DRAWINGS, NORMS NOT SUBMITTED FOR OUR EVALUATION PROVE TO HAVE AN IMPACT ON QUOTED VALVES

B) THE VALVES HAVE BEEN QUOTED WITH PARTS IN CAST OR FORGED\BAR STOCK EXECUTION AS PER OMS STANDARD IF NOT PROHIBITED BY ARAMCO SPECIFICATIONS

Page 2 of 4
Customer: SICIM SPA (OMS SALERI SAUDIA) OMS Offer n°: OFF10620
Project: ENGINEERING, PROCUREMENT & CONSTRUCTION FOR UPGRADE UTHMANIYAH-ABQAIQ PIPELINES SYSTEMS Revision: A
Enquiry n°: SA010-MR-005-Rev. A_012 Date: 13/9/2021
dP FOR
DATA OMS OPERATI ACTUAT INSPECTI
CLIENT FLANGE BORE *VALVE BODY/FL SEAT SEAT PAINT SERVICE LEAKAG UNIT
ITEM TAG PED CAT SHEET PIP CL CLASS ENDS BORE VALVES HEAD BALL STEM SEALS STUDS NUTS QTY NG OR ON NOTES EXTENDE
CODE SIZE (in) SIZE (in) TYPE ANGES UNIT INSERT SYSTEM CLASS E RATE PRICE
NO MODEL SYSTEM SIZING CLASS D PRICE
(BAR)

FOR VALVES ACCORDING TO 04-SAMSS-051 (VALVES ACCORDING TO API 6D AND SIZE 2" AND ABOVE) WE REMARKS THAT:

ALL BODY ARE PROPOSED IN FORGED EXECUTION IN LIEU OF CASTING REQUIRED ON VALVES DATA SHEETS

ALL SEAT UNIT ARE PROPOSED IN FORGED EXECUTION. BALL FOR RATING CLASS 600 AND BELOW AND SIZE 3" AND ABOVE ARE PROPOSED IN CAST OR CLADDED EXECUTION.

ALL STEM ARE PROPOSED IN ROLLED BAR EXECUTION

C) WE PROPOSE OUR STANDARD STEM PACKING IS MADE BY INNER SEALS IN ELASTOMERIC AND OUTER SEAL ELEMENT IN GRAPHITE (FIRE SAFE). WE NOT PROPOSE PURE GRAPHITE PACKING AS MENTIONED ON VALVES DATA SHEETS BEING OUR PROPOSAL IN FULLY COMPLIANCE WITH ARAMCO SAMSS

D) WE PROPOSE GRAPHITE GASKETS AND NOT SPRIRAL WOUND GASKETS PRESENT IN VALVES DATA SHEETS IN ORDER TO STANDARIZE OUR PRODUCTION AND BEING OUR PROPOSAL IN FULLY COMPLIANCE WITH ARAMCO SAMSS

E) ACC. TO DOC. SAES-L-108 TABLE II SPRINGS MATERIAL SHALL BE INCONEL X-750, EXCEPTION MADE FOR VALVES WITH TRIM IN 316, 20, SSS, COPPER ALLOY AND NICKEL ALLOY THAT WILL BE SUPPLIED WITH SPRINGS IN ELGILOY

F) CARBON STEEL AND LOW ALLOY STEEL BOLTING INSTALLED ON CARBON STEEL VALVES SHALL BE ZINC PLATED BICHROMATED IN ACCORDANCE TO B633-FEZN12 SC.3 FINISH COLOR CHROMATE TREATMENT TYPE II (ISO4042-12C FE OR ASTM F871 ) AND PAINTED WITH SAME PAINTING CYCLE OF VALVES BODY

BEING BOLTING PAINTED WE CONSIDER GALVANISING AND/OR FLOUROPOLIMER COATING AS PER DOC. SAES-H-001 SECTION 7.1.G AS NOT NECESSARY BEING APPLICABLE TO UNPROTECTED BOLTING.

G) THE VALVE WILL BE FIRESAFE CERTIFIED AS PER API 607 OR ISO 10497 AND NOT API-6FA. THEREFORE WE UNDERSTAND THAT VALVE BODY MUST NOT BE SUPPLIED WITH FIRE PROOFING PROTECTION

J) REGARDING PARA 5 OF DOC. 04-SAMSS-048 WE CONSIDER THAT ALL VALVES ARE NOT IN FLARE SYSTEM ISOLATION. THEREFORE ALL ADDITIONAL TEST ARE CONSIDERED AS NOT APPLICABLE

K) WE HAVE PROPOSED APCS 26 ACCORDING TO SAES-H-001 ON CARBON STEEL PARTS ONLY AND NO COATING ON ALL STAINLESS STEEL AND INCONEL 625 PARTS (I.E.SEALANT INJECTION DEVICE, DRAIN VALVES)

M) NOT BEING OTHERWISE SPECIFIED WE HAVE CONSIDERED API 6D QUALITIY SPECIFICATION LEVEL 1 (QSL 1) FOR API 6D VALVES, AND THE DOCUMENTATION SHALL BE IN ACCORDANCE WITH API 6D ANNEX J PAR J.4

N) IN ORDER TO COMPLY WITH REQUIREMENT OF -28°F OF MINIMUM SERVICE TEMPERATURE WE PREFER TO OFFER LOW TEMPERATURE CARBON STEEL IN LIEU OF CARBON STEEL AS BODY, BONNET AND BALL MATARILAS (IN CASE OF CLADDED BALL)

FOR THE SAME REASON WE PREFER TO OFFER ASTM A320 Gr. L7M \ A194 Gr. 7M (S3) IN LIEU OF A193 GR B7M/ASTM A194 GR 2HM AS BOLTING MATERIAL

*VALVE TYPE

1: BALL VALVE SPLIT BODY FLOATING BALL, "SPLIBO" - 2/3 PIECES (S7100, S7400…)

Page 3 of 4
Customer: SICIM SPA (OMS SALERI SAUDIA) OMS Offer n°: OFF10620
Project: ENGINEERING, PROCUREMENT & CONSTRUCTION FOR UPGRADE UTHMANIYAH-ABQAIQ PIPELINES SYSTEMS Revision: A
Enquiry n°: SA010-MR-005-Rev. A_012 Date: 13/9/2021
dP FOR
DATA OMS OPERATI ACTUAT INSPECTI
CLIENT FLANGE BORE *VALVE BODY/FL SEAT SEAT PAINT SERVICE LEAKAG UNIT
ITEM TAG PED CAT SHEET PIP CL CLASS ENDS BORE VALVES HEAD BALL STEM SEALS STUDS NUTS QTY NG OR ON NOTES EXTENDE
CODE SIZE (in) SIZE (in) TYPE ANGES UNIT INSERT SYSTEM CLASS E RATE PRICE
NO MODEL SYSTEM SIZING CLASS D PRICE
(BAR)

2: BALL VALVE SPLIT BODY TRUNNION - 2/3 PIECES (S7100.T, S7500.T, S7600.T…)

3: BALL VALVE SPLIT BODY FLOATING BALL "VULCAN" - 2/3 PIECES - INSERT BODY (VULCAN 3500)

4: BALL VALVE SPLIT BODY FLOATING BALL "3P" - 3 PIECES - SANDWICH CONSTRUCTION

5: BALL VALVE TOP ENTRY TRUNNION "ENTOP" - 1 PIECE

6: BALL VALVE TOP ENTRY FLOATING "ENTOP" - 1 PIECE

7: BALL VALVE ALL WELDED BODY

Page 4 of 4
DocuSign Envelope ID: D23C0D38-F584-4B5C-802A-C502E8B28155

Aramco Overseas Company B.V. Tel: +31 (0) 88262 2000

Scheveningseweg 62-66 Fax: +31 (0) 88262 3000
2517 KX The Hague www.aramcooverseas.com
The Netherlands

OMS SALERI SPA BIONE

ATTN: MR. I. VACCARO
VIA PRADA 7/9
25070 BIONE
ITALY

The Hague, June 2, 2021

AOC Ref: AA/IL 107000193578

SUBJECT: PLANT EVALUATION

Vendor ID: 10029261 - Plant ID: 30005131 - Ariba Network ID: AN01010188882

Dear Mr. Vaccaro,

In AOC letter from April 21st, 2021 we informed you that plant in OMS SALERI SPA BIONE was “Approved with
Corrective Actions”.

We are pleased to inform you that following a further evaluation your company status has changed and is now Approved
with limitations to supply the 9COM material(s) listed in the attachment.

This approval should not be regarded as a commitment from Aramco Overseas Company (AOC) to purchase from you.
However, your company will have the opportunity along with other approved suppliers to respond to requests for
quotation in accordance with AOC’s established policies and procedures.

It is the responsibility of the manufacturer to notify AOC in a timely manner of any change of company name and/or
address, change of manufacturing location (sub sourcing fabrication of major components) and/or discontinuance of
production of approved material(s). The notification should be presented on your company letterhead paper, signed by
Senior Management and addressed to the AOC Supervisor Sourcing & Supplier Relationship Management (SRM) Unit at
SRM@aramcooverseas.com.

Important note: In case of change of the manufacturing location or 9COM(s) relocation, the approval of the new
manufacturing plant is at the discretion of Saudi Aramco and may be rejected. Consideration for approval of your new
plant depends, amongst others, on the criticality of the material, and the present number of Saudi Aramco approved
manufacturing plants worldwide.

Please quote the above referenced Vendor ID and Plant ID in all future correspondence.

We would like to take this opportunity to thank you for your interest in doing business with AOC and SAO.

For any questions regarding this notification, please use the aforementioned email address.

Yours faithfully,

Lenka Antolova
Supervisor Sourcing & SRM
Supplier Chain Management Dept.

K.v.K No. 28040948

VAT No: NL.00.85.899.B01
DocuSign Envelope ID: D23C0D38-F584-4B5C-802A-C502E8B28155

Attachment:

Inspection lot: 107000193578

Approved 9COM(s) with limitations:

9COM Description
6000000244* VALVE BALL; SIZE NPS 2 THROUGH 24,ASME CL 150 AND UP SUPPLY, FLANGED
OR BUTTWELD END CONN,STEEL BODY,STYLE SPLIT BODY, TRUNNION
SUPPORTED SUPPORT,METAL SEATED SEAT, 04-SAMSS-035,04-SAMSS-048 04-
SAMSS-051,WITH OR WITHOUT ACTUATOR
6000000246* VALVE BALL; SIZE NPS 1/4 TO 2 INCH,ANY RATING SUPPLY, SOCKET WELD,
THREADED OR SPECIAL ENDS END CONN,STEEL BODY, 04-SAMSS-035,04-
SAMSS-048,WITH OR WITHOUT ACTUATOR
6000000248* VALVE, BALL; SIZE ANY,2000-5000 PSI SUPPLY SUPPLY,FLANGED OR BUTTWELD
END CONN,STEEL BODY,STYLE SPLIT BODY,TRUNNION SUPPORTED SUPPORT,
SOFT SEATED SEAT,04-SAMSS-055,API 6A,WITH OR WITHOUT ACTUATOR
6000000249* VALVE BALL; SIZE NPS 26 AND UP,ASME CLASS 150 AND UP SUPPLY, FLANGED
OR BUTTWELD ENDS END CONN,STEEL BODY,STYLE SPLIT BODY, TRUNNION
SUPPORTED SUPPORT,METAL SEATED SEAT, 04-SAMSS-051,04-SAMSS-035 04-
SAMSS-048,WITH OR WITHOUT ACTUATOR
6000000250* VALVE BALL; SIZE NPS 2 THRU 24,ASME CLASS 150 AND UP SUPPLY, FLANGED
OR BUTTWELD END CONN,STEEL BODY,STYLE SPLIT BODY, TRUNNION
SUPPORTED SUPPORT,SOFT SEATED SEAT, 04-SAMSS-051,04-SAMSS-035 04-
SAMSS-048,WITH OR WITHOUT ACTUATOR
6000000252* VALVE BALL; SIZE 26 INCH AND UP,ANSI CL 150 AND UP SUPPLY,FLANGED OR
BUTTWELD END CONN,STEEL BODY, SOFT SEATED BODY,STYLE TOP
ENTRY,TRUNNION SUPPORTED SUPPORT,04-SAMSS-051,04-SAMSS-035 04-
SAMSS-048,WITH OR WITHOUT ACTUATOR
6000000253* VALVE BALL; SIZE 2 IN TO 24 IN, SOFT SEATED,ANSI CL 150 AND UP SUPPLY,
FLANGED OR BUTTWELD END CONN,STEEL BODY,STYLE TOP ENTRY,
TRUNNION SUPPORTED SUPPORT,04-SAMSS-035,04-SAMSS-051,WITH OR
WITHOUT ACTUATOR
6000012420* VALVE BALL; SIZE NPS 26 AND UP,ASME CLASS 150 AND UP SUPPLY, FLANGED
OR BUTTWELDED END CONN,STEEL BODY,STYLE SPLIT BODY, TRUNNION
SUPPORTED SUPPORT,SOFT SEATED SEAT, 04-SAMSS-051,04-SAMSS-035 04-
SAMSS-048,WITH OR WITHOUT ACTUATOR

LIMITATIONS:
* Engineering by Odolo Plant, as per findings of IL # 107000126830.

Previously Approved 9COM(s) with limitations:

9COM Description
VALVE BALL; SIZE NPS 2 THRU 12,ASME CLASS 150 & 300 SUPPLY, FLANGED OR
6000000239* BUTTWELDED END CONN,STEEL BODY,SEAT SUPPORTED SUPPORT, 04-SAMSS-
051,04-SAMSS-035 04-SAMSS-048,WITH OR WITHOUT ACTUATOR
VALVE, BALL; SIZE UP TO 2 IN.,ANY SUPPLY, SOCKET WELD, THREADED, OR
6000000240* SPECIAL END CONN,ANY BODY,SEAT SUPPORTED SUPPORT, 04-SAMSS-035,04-
SAMSS-048,WITH OR WITHOUT ACTUATOR
VALVE BALL; SIZE ANY SIZE,ANY RATING SUPPLY,ANY END END CONN, NON-
6000000319*
FERROUS (BRONZE/BRASS) BODY, 04-SAMSS-035,04-SAMSS-048,WITH OR
WITHOUT ACTUATOR

LIMITATIONS:
* Design and engineering limited to : OMS Saleri Odolo Plant
 (St) Project Unit Type Des. N°Serial Rev.

(2) SA010 00

Vendor Name:

OMS SALERI S.p.a

Document Title:
Contractor

Req. No: Date: Document No:

Enquiry n°: SA010-MR-005-Rev.

A_012

Project : ENGINEERING, PROCUREMENT & CONSTRUCTION FOR

UPGRADE UTHMANIYAH-ABQAIQ PIPELINES SYSTEMS BI# 10-01196
CONTRACT# 6600049184.

LIST OF DEVIATIONS
Bidder to provide, with the bid, duly filled deviation table, if any. Technical deviations mentioned elsewhere shall not
be considered/evaluated.

Serial Deviation Accepted / Rejected /

No. Para No. Requir Vendor Proposal Reason for Deviation Remark (by Purchaser)
ement

FOR VALVES WITH NOTE 5 IN VALVES LIST BALL IS

REQUIRED IN CLADDED EXECUTION (A105N PLUS
VALVES DATA IN ORDER TO PROPOSE A BETTER TECHNICAL AND
1 SS316L OVERLAY) IN LIEU OF SOLID SS316L
SHEETS COMMERCIAL PROPOSAL
EXECUTION. PLEASE ADVISE IF OUR SOLUTION IS
NOT ACCEPTABLE FOR YOUR SIDE

FOR VALVES WITH NOTE 28 IN VALVES LIST :

1. INTERNAL DIAMETER SHALL BE CONSIDERED AS

PER API 6D SPECIFICATION
VALVES DATA
2. WE CONSIDER THE TAPPING MACHINE AND ALL
2 NOT BEING OTHERWISE SPECIFIED
SHEETS OTHERS ACCESSORIES NECESSARY FOR THE
TAPPING ACTIVITIES OUTSIDE OF OUR SCOPE OF
SUPPLY

THE VALVES HAVE BEEN QUOTED WITH PARTS IN

CAST OR FORGED\BAR STOCK EXECUTION AS PER
OMS STANDARD IF NOT PROHIBITED BY ARAMCO
SPECIFICATIONS

WE REMARKS THAT:

ALL BODY ARE PROPOSED IN FORGED EXECUTION

VALVES DATA IN LIEU OF CASTING REQUIRED ON VALVES DATA
3
SHEETS SHEETS

ALL SEAT UNIT ARE PROPOSED IN FORGED

EXECUTION. BALL FOR RATING CLASS 600 AND
BELOW AND SIZE 3" AND ABOVE ARE PROPOSED IN
CAST OR CLADDED EXECUTION.

ALL STEM ARE PROPOSED IN ROLLED BAR

EXECUTION
 WE NOT PROPOSE PURE GRAPHITE PACKING AS
WE PROPOSE OUR STANDARD STEM PACKING IS
VALVES DATA MENTIONED ON VALVES DATA SHEETS BEING OUR
4 MADE BY INNER SEALS IN ELASTOMERIC AND
SHEETS PROPOSAL IN FULLY COMPLIANCE WITH ARAMCO
OUTER SEAL ELEMENT IN GRAPHITE (FIRE SAFE).
SAMSS

WE PROPOSE GRAPHITE GASKETS AND NOT IN ORDER TO STANDARIZE OUR PRODUCTION AND
VALVES DATA
5 SPRIRAL WOUND GASKETS PRESENT IN VALVES BEING OUR PROPOSAL IN FULLY COMPLIANCE WITH
SHEETS
DATA SHEETS ARAMCO SAMSS

WE PROPOSE VITON GLT AED AS SEALS ACCORDING TO OUTABLE III OF SAES-L-108. WE

VALVES DATA
6 REMARKS THAT THE EXACT FLUID COMPOSITION IS
SHEETS
MATERIALS NOT IN OUR POSSESSION

CARBON STEEL AND LOW ALLOY STEEL BOLTING

INSTALLED ON CARBON STEEL VALVES SHALL BE
ZINC PLATED BICHROMATED IN ACCORDANCE TO BEING BOLTING PAINTED WE CONSIDER
B633-FEZN12 SC.3 FINISH COLOR CHROMATE GALVANISING AND/OR FLOUROPOLIMER COATING
VALVES DATA TREATMENT TYPE II (ISO4042-12C FE OR ASTM F871
7 AS PER DOC. SAES-H-001 SECTION 7.1.G AS NOT
SHEETS ) AND PAINTED WITH SAME PAINTING CYCLE OF NECESSARY BEING APPLICABLE TO UNPROTECTED
VALVES BODY BOLTING.

8 VALVES DATA THE VALVE WILL BE FIRESAFE CERTIFIED AS PER

SHEETS API 607 OR ISO 10497 AND NOT API-6FA

DOC. 04- WE CONSIDER THAT ALL VALVES ARE NOT IN FLARE

9 SAMSS- SYSTEM ISOLATION. THEREFORE ALL ADDITIONAL NOT BEING OTHERWISE SPECIFIED
048PARA 5 TEST ARE CONSIDERED AS NOT APPLICABLE

WE HAVE PROPOSED APCS 26 ACCORDING TO

SAES-H-001 ON CARBON STEEL PARTS ONLY AND
VALVES DATA
10 NO COATING ON ALL STAINLESS STEEL AND NOT BEING OTHERWISE SPECIFIED
SHEETS
INCONEL 625 PARTS (I.E.SEALANT INJECTION
DEVICE, DRAIN VALVES)

WE PREFER TO OFFER LOW TEMPERATURE

CARBON STEEL IN LIEU OF CARBON STEEL AS
BODY, BONNET AND BALL MATARILAS (IN CASE OF
CLADDED BALL)
VALVES DATA IN ORDER TO COMPLY WITH REQUIREMENT OF -
11
SHEETS 28°F OF MINIMUM SERVICE TEMPERATURE
FOR THE SAME REASON WE PREFER TO OFFER
ASTM A320 Gr. L7M \ A194 Gr. 7M (S3) IN LIEU OF
A193 GR B7M/ASTM A194 GR 2HM AS BOLTING
MATERIAL

SUBMISSION DATES OF REQUIRED

DOCUMENTATION SHALL BE DISCUSSED AND
AGREEDED AFTER ORDER PLACEMENT DURING
KICK OFF MEETING OR BEFORE ORDER DURING BASED ON REQUIRED DELIVERY AND WORKLOAD OF
12 NMR 7925 FINAL COMMERCIAL NEGOTATION DOCUMENTATION DEPARTMENT.

HARD COPIES SHALL BE SUBMITTED DURING PHASE

603 ONLY

13 doc. 04- THE DOCUMENT IS CONSIDERD AS NOT NOT BEING OTHERWISE SPECIFIED
SAMSS-003 APPLICABLE

10 SEPTEMBER 2021
DATE

( STAMP AND SIGNATURE )

Saudi Aramco 6233-1-ENG (11/2010)

SAUDI ARABIAN OIL COMPANY

UNTIL CERTIFIED AND DATED

THIS REVISION IS NOT TO BE
USED FOR CONSTRUCTION
ISSUED FOR 100% PROJECT VALVE DATA SHEET
REVISION DESCRIPTION

THIS DRAWING AND THE INFORMATION CONTAINED HEREIN ARE THE SOLE PROPERTY OF SAUDI ARAMCO. NO REPRODUCTION IN FULL OR IN PART SHALL BE OBTAINED FROM THIS DOCUMENT WITHOUT THE WRITTEN CONSENT OF ITS OWNER.
Notes To Purchaser:

This form shall be used only for Direct Charge (DC) purchase requisitions and orders for valves in Class 04.
PROPOSAL

Valves shall be in accordance with 04-SAMSS's -035, -048, at minimum, and other 04-SAMSS's as applicable.

Service: VALVES NOT IN FLARE ISOLATION SYSTEM SERVICES Tag No.

SOUR CRUDE OIL (3LE0P02)
P. O. # Enquiry n°: SA010-MR-005-Rev. A_012 Line Item #
ITEM 'A1.2.1, A1.2.2, A1.2.3
6/16/2019

10-01196-0001
DATE

JOB ORDER/EWO NO.

BOLTING SHALL BE ZINC PLATED BICHROMATED IN ACCORDANCE TO B633-FEZN12 SC.3 FINISH COLOR
CHROMATE TREATMENT TYPE II (ISO4042-12C FE OR ASTM F871 ) AND PAINTED WITH SAME PAINTING CYCLE OF
VALVES BODY. BEING BOLTING PAINTED WE CONSIDER GALVANISING AND/OR FLOUROPOLIMER COATING AS PER
DESIGN SECTION DOC. SAES-H-001 SECTION 7.1.G AS NOT NECESSARY BEING APPLICABLE TO UNPROTECTED BOLTING
REV. NO.

Valve Type: Industrial Standard:

C

BALL API 6D
BY/DATE
OTHER

Sub Type: SAMSS's (in addition to 04-SAMSS-035 & 04-SAMSS-048)

LONG PATTERN, FULL BORE, TRUNNION MOUNTED 04-SAMSS-051

Pressure Class: Size / Port:

CONST. AGENCY/DATE OPERATIONS/DATE

6/16/2019
REVIEW FOR KEY DRAWINGS

CLASS 300 4" TO 24"

REQUIRED (SAUDI ARAMCO)

HDS

End Connections: Operator Type:

FLANGED RF AS PER ASME B 16.5
GEAR OPERATED

Other: Vendor References: S7100.T.SF.300

9COM 6000000250
6/16/2019

DOUBLE BLOCK AND BLEED SAES-L-102

HHB

Firesafe: API 607 OR ISO 10497 AND NOT API-6FA Maximum Service Temperature 170 °F O O
( C or F)
O O
YES API 6FA NO Minimum Service Temperature -28 °F ( C or F)

Installation Orientation MAOP:

HORIZONTAL VERTICAL
Pipe: HOR / VER Valve Stem: VER / HOR AS PER ASME B 16.34 PRESSURE RATING
CERTIFIED/DATE

6/16/2019
DESIGN CERTIFICATION

JNK
(DESIGN AGENCY)

MATERIALS SECTION
A350 LF2 CL.1 (OBTAINED BY FORGING) WITH
Body / Bonnel: Stem:
INTERNAL FBE COATING OR SS316L OVERLAY ON
AREA
ASTM A216 WCB WHERE
WITH FBE IS NOT
INTERNAL FBEFEASEABLE
COATING A479 Tp 316/316L (OBTAINED BY ROLLED BAR)
SS316
ENGG./DATE

Seat / Inserts: Wedge / Disc / Ball / Plug:

SEAT UNIT: 'A182 F316/F316L
6/16/2019

(OBTAINED BY FORGING)
SSH

SS316 WITH SEAT

RTFEINSERT:
INSERTS A351 CF8M (OBTAINED BY CAST)
SS316
RPTFE
Packing / O-Rings: STEM PACKING: VITON GLT AED Bolting:

O-RINGS: VITON GLT AED PLUS GRAPHITE AS FIRE SAFE AS BLT A320
STUDGr.
W/2L7MHVY
\ A194
HEXGr.NUT;ALLOY
7M (S3) STL ASTM A193 GR
FLEX GPH PKG PER DOC. 04-SAMSS-051
B7M/ASTM A194 GR 2HM
IS COVERED, FOR ALL APPROVAL

AND CERTIFICATION REQUIREMENTS, PER SAEP-334, UNDER

Gaskets / Seals: Coatings / Linings / Platings:

APCS 26 ACC. TO SAES-H-001 ON CARBON
SEALS: VITON GLT AED STEEL PARTS
INTERNAL ONLY, NO
FBE COATING COATING ON
(APCS-102B)
GRAPHITE
SPIRAL WOUND GASKETS
SS 316 AND GRAPHITE FLR
SS316 COMPONENTS
EXTERNAL PAINTING AS PER SAES-H-001 (APCS-26)
Sour Service Other:
YES NO VALVE INSPECTION AND TESTING AS PER API 598
REVISION VALIDATION

DRAWING COMPLETION CERTIFICATE NO.

DOC. 04-SAMSS-003 IS CONSIDERED AS NOT APPLICABLE

NOR BEING REQUIRED ON MATERIAL REQUISITION
SPECIAL NOTES SECTION
NOT BEING INDICATED WE HAVE SUPPOSED THAT
1. *Indicates information to be provided by vendor.
ALL VALVES ARE FOR ABOVE GROUND SERVICE,
2. Valve shall comply with the requirement of SAES-L-108 and SAES-L-105 ONSHORE INSTALLATION AND FOR MILD
3. Valve shall be suitable for sour service (NACE MR175/ISO 15156) ATMOSPHERIC EXPOSURE
THIS REVISION NO.

BALL VALVE (RF #300) DWG. TYPE PLANT NO. INDEX DRAWING NO. SHT. NO. REV. NO.

VALVE DATA SHEET DAT

PIPELINE REHABILITATION PROJECT 282 L PE-530101 026 C
UTHMANIYAH SAUDI ARABIA
EKRD/6233-1-1110.XLS
Saudi Aramco 6233-1-ENG (11/2010)

SAUDI ARABIAN OIL COMPANY

UNTIL CERTIFIED AND DATED

THIS REVISION IS NOT TO BE
USED FOR CONSTRUCTION
ISSUED FOR 100% PROJECT VALVE DATA SHEET
REVISION DESCRIPTION

THIS DRAWING AND THE INFORMATION CONTAINED HEREIN ARE THE SOLE PROPERTY OF SAUDI ARAMCO. NO REPRODUCTION IN FULL OR IN PART SHALL BE OBTAINED FROM THIS DOCUMENT WITHOUT THE WRITTEN CONSENT OF ITS OWNER.
Notes To Purchaser:

This form shall be used only for Direct Charge (DC) purchase requisitions and orders for valves in Class 04.
PROPOSAL

Valves shall be in accordance with 04-SAMSS's -035, -048, at minimum, and other 04-SAMSS's as applicable.

Service: VALVES NOT IN FLARE ISOLATION SYSTEM SERVICES Tag No.

SOUR CRUDE OIL (3LE0P02)
P. O. # Line Item #
Enquiry n°: SA010-MR-005-Rev. A_012
6/16/2019

ITEM 'A2.1.1, A2.1.2

10-01196-0001
DATE

JOB ORDER/EWO NO.

BOLTING SHALL BE ZINC PLATED BICHROMATED IN ACCORDANCE TO B633-FEZN12 SC.3 FINISH COLOR
CHROMATE TREATMENT TYPE II (ISO4042-12C FE OR ASTM F871 ) AND PAINTED WITH SAME PAINTING CYCLE OF
VALVES BODY. BEING BOLTING PAINTED WE CONSIDER GALVANISING AND/OR FLOUROPOLIMER COATING AS PER
DESIGN SECTION DOC. SAES-H-001 SECTION 7.1.G AS NOT NECESSARY BEING APPLICABLE TO UNPROTECTED BOLTING
REV. NO.

Valve Type: Industrial Standard:

C

BALL API 6D
BY/DATE
OTHER

Sub Type: SAMSS's (in addition to 04-SAMSS-035 & 04-SAMSS-048)

LONG PATTERN, FULL BORE, TRUNNION MOUNTED 04-SAMSS-051

Pressure Class: Size / Port:

CONST. AGENCY/DATE OPERATIONS/DATE

6/28/2018
REVIEW FOR KEY DRAWINGS

CLASS 300 26" AND ABOVE

REQUIRED (SAUDI ARAMCO)

HDS

End Connections: Operator Type:

FLANGED RF AS PER ASME B 16.47 A
GEAR OPERATED

Other: Vendor References: S7100.T.SF.300

9COM 6000012420
6/16/2019

DOUBLE BLOCK AND BLEED SAES-L-102

HHB

O O
Firesafe: API 607 OR ISO 10497 AND NOT API-6FA Maximum Service Temperature 170 °F ( C or F)
O O
YES API 6FA NO Minimum Service Temperature -28 °F ( C or F)

Installation Orientation MAOP:

Pipe: HORIZONTAL
HOR / VER Valve Stem: VERTICAL
VER / HOR AS PER ASME B 16.34 PRESSURE RATING
CERTIFIED/DATE

6/16/2019
DESIGN CERTIFICATION

JNK
(DESIGN AGENCY)

MATERIALS SECTION
Body / Bonnel:
A350 LF2 CL.1 (OBTAINED BY FORGING) WITH Stem:
INTERNAL FBE COATING OR SS316L OVERLAY ON A479 Tp 316/316L (OBTAINED BY ROLLED BAR)
ASTM A216 WCB
AREA WITH FBE
WHERE INTERNAL
IS NOT FBE COATING
FEASEABLE SS316
ENGG./DATE

Seat / Inserts: Wedge / Disc / Ball / Plug:

SEAT UNIT: 'A182 F316/F316L
6/16/2019

(OBTAINED BY FORGING) A350 LF2 CL.1 (OBTAINED BY FORGING) WITH 3 mm 3316L

SSH

SS316 WITH RTFE

SEAT INSERTS
INSERT: RPTFE SS316
WELD OVERLAY ON ALL WETTED PARTS
Packing / O-Rings: Bolting:
STEM PACKING: VITON GLT AED
O-RINGS: VITON PLUS GRAPHITE AS FIRE SAFE AS BLT STUD W/2 HVY HEX NUT;ALLOY STL ASTM A193 GR
FLEX GPHGLT
PKGAED PER DOC. 04-SAMSS-051
A320 Gr. L7M \ A194 Gr. 7M (S3)
B7M/ASTM A194 GR 2HM
IS COVERED, FOR ALL APPROVAL

AND CERTIFICATION REQUIREMENTS, PER SAEP-334, UNDER

Gaskets / Seals: Coatings / Linings / Platings:

APCS 26 ACC. TO SAES-H-001 ON CARBON
SEALS: VITON GLT AED INTERNAL FBEONLY,
STEEL PARTS COATING (APCS-102B)
NO COATING ON
GRAPHITE
SPIRAL GASKETS
WOUND SS 316 AND GRAPHITE FLR
EXTERNAL PAINTING AS PER SAES-H-001 (APCS-26)
SS316 COMPONENTS
Sour Service Other:
YES NO VALVE INSPECTION AND TESTING AS PER API 598
REVISION VALIDATION

DRAWING COMPLETION CERTIFICATE NO.

DOC. 04-SAMSS-003 IS CONSIDERED AS NOT APPLICABLE

SPECIAL NOTES SECTION NOR BEING REQUIRED ON MATERIAL REQUISITION

1. *Indicates information to be provided by vendor. NOT BEING INDICATED WE HAVE SUPPOSED THAT
ALL VALVES ARE FOR ABOVE GROUND SERVICE,
2. Valve shall comply with the requirement of SAES-L-108 and SAES-L-105 ONSHORE INSTALLATION AND FOR MILD
3. Valve shall be suitable for sour service (NACE MR175/ISO 15156) ATMOSPHERIC EXPOSURE
THIS REVISION NO.

BALL VALVE (RF #300) DWG. TYPE PLANT NO. INDEX DRAWING NO. SHT. NO. REV. NO.

VALVE DATA SHEET DAT

PIPELINE REHABILITATION PROJECT 282 L PE-530101 027 C
UTHMANIYAH SAUDI ARABIA
EKRD/6233-1-1110.XLS
Saudi Aramco 6233-1-ENG (11/2010)

SAUDI ARABIAN OIL COMPANY

UNTIL CERTIFIED AND DATED

THIS REVISION IS NOT TO BE
USED FOR CONSTRUCTION
ISSUED FOR 100% PROJECT VALVE DATA SHEET
REVISION DESCRIPTION

THIS DRAWING AND THE INFORMATION CONTAINED HEREIN ARE THE SOLE PROPERTY OF SAUDI ARAMCO. NO REPRODUCTION IN FULL OR IN PART SHALL BE OBTAINED FROM THIS DOCUMENT WITHOUT THE WRITTEN CONSENT OF ITS OWNER.
Notes To Purchaser:

This form shall be used only for Direct Charge (DC) purchase requisitions and orders for valves in Class 04.
PROPOSAL

Valves shall be in accordance with 04-SAMSS's -035, -048, at minimum, and other 04-SAMSS's as applicable.

Service: VALVES NOT IN FLARE ISOLATION SYSTEM SERVICES Tag No.

SOUR CRUDE OIL (3CS1P02)
P. O. # Enquiry n°: SA010-MR-005-Rev. A_012 Line Item #
ITEM 'A3.1.1, A3.2.1, A3.3.1
6/16/2019

10-01196-0001
DATE

JOB ORDER/EWO NO.

BOLTING SHALL BE ZINC PLATED BICHROMATED IN ACCORDANCE TO B633-FEZN12 SC.3 FINISH COLOR
CHROMATE TREATMENT TYPE II (ISO4042-12C FE OR ASTM F871 ) AND PAINTED WITH SAME PAINTING CYCLE OF
VALVES BODY. BEING BOLTING PAINTED WE CONSIDER GALVANISING AND/OR FLOUROPOLIMER COATING AS PER
DESIGN SECTION
REV. NO.

DOC. SAES-H-001 SECTION 7.1.G AS NOT NECESSARY BEING APPLICABLE TO UNPROTECTED BOLTING
Valve Type: Industrial Standard:
C

BALL API 6D
BY/DATE
OTHER

Sub Type: SAMSS's (in addition to 04-SAMSS-035 & 04-SAMSS-048)

LONG PATTERN, FULL BORE, FLOATING BALL 04-SAMSS-051

Pressure Class: Size / Port:

CONST. AGENCY/DATE OPERATIONS/DATE

6/16/2019
REVIEW FOR KEY DRAWINGS

CLASS 300 2" TO 3"

REQUIRED (SAUDI ARAMCO)

HDS

End Connections: Operator Type:

FLANGED RF AS PER ASME B 16.5
LEVER OPERATED

Other: Vendor References: S7100.SF.300

9COM 6000000239
6/16/2019

SAES-L-102
HHB

O O
Firesafe: API 607 OR ISO 10497 AND NOT API-6FA Maximum Service Temperature 170 °F ( C or F)
O O
YES API 6FA NO Minimum Service Temperature -28 °F ( C or F)

Installation Orientation MAOP:

Pipe: HORIZONTAL
HOR / VER VERTICAL
Valve Stem: VER / HOR AS PER ASME B 16.34 PRESSURE RATING
CERTIFIED/DATE

6/16/2019
DESIGN CERTIFICATION

JNK
(DESIGN AGENCY)

MATERIALS SECTION
Body / Bonnel: Stem:
A350 LF2 CL.1 WITHOUT ANY WELD OVERLAY
A479 Tp 316/316L (OBTAINED BY ROLLED BAR)
ASTM A216 WCB SS316
ENGG./DATE

Seat / Inserts: Wedge / Disc / Ball / Plug:

6/16/2019

SEAT UNIT: NOT APPLICABLE A182 F316/F316L (OBTAINED BY

SEAT INSERT: RPTFE
SSH

RTFE FORGING)
SS316

Packing / O-Rings: Bolting:

STEM PACKING: VITON GLT AED
O-RINGS: A320
BLT Gr. W/2
STUD L7M \HVY
A194HEX
Gr. 7M (S3)
NUT;ALLOY STL ASTM A193 GR
FLEX GPHVITON
PKG GLT AED PLUS GRAPHITE AS FIRE SAFE AS
PER DOC. 04-SAMSS-051 B7M/ASTM A194 GR 2HM
IS COVERED, FOR ALL APPROVAL

AND CERTIFICATION REQUIREMENTS, PER SAEP-334, UNDER

Gaskets / Seals: Coatings / Linings / Platings:

SEALS: VITON GLT AED APCS 26 ACC. TO SAES-H-001 ON CARBON

GRAPHITE
SPIRAL GASKETS
WOUND SS 316 AND GRAPHITE FLR STEEL PARTS
EXTERNAL ONLY, NO
PAINTING ASCOATING ON
PER SAES-H-001 (APCS-26)
SS316 COMPONENTS
Sour Service Other:
YES NO VALVE INSPECTION AND TESTING AS PER API 598
REVISION VALIDATION

DRAWING COMPLETION CERTIFICATE NO.

DOC. 04-SAMSS-003 IS CONSIDERED AS NOT APPLICABLE

SPECIAL NOTES SECTION NOR BEING REQUIRED ON MATERIAL REQUISITION
NOT BEING INDICATED WE HAVE SUPPOSED THAT
1. *Indicates information to be provided by vendor.
ALL VALVES ARE FOR ABOVE GROUND SERVICE,
2. Valve shall comply with the requirement of SAES-L-108 and SAES-L-105 ONSHORE INSTALLATION AND FOR MILD
3. Valve shall be suitable for sour service (NACE MR175/ISO 15156) ATMOSPHERIC EXPOSURE
THIS REVISION NO.

BALL VALVE (RF #300) DWG. TYPE PLANT NO. INDEX DRAWING NO. SHT. NO. REV. NO.

VALVE DATA SHEET DAT

PIPELINE REHABILITATION PROJECT 282 L PE-530101 031 C
UTHMANIYAH SAUDI ARABIA
EKRD/6233-1-1110.XLS
Saudi Aramco 6233-1-ENG (11/2010)

SAUDI ARABIAN OIL COMPANY

UNTIL CERTIFIED AND DATED

THIS REVISION IS NOT TO BE
USED FOR CONSTRUCTION
ISSUED FOR 100% PROJECT VALVE DATA SHEET
REVISION DESCRIPTION

THIS DRAWING AND THE INFORMATION CONTAINED HEREIN ARE THE SOLE PROPERTY OF SAUDI ARAMCO. NO REPRODUCTION IN FULL OR IN PART SHALL BE OBTAINED FROM THIS DOCUMENT WITHOUT THE WRITTEN CONSENT OF ITS OWNER.
Notes To Purchaser:

This form shall be used only for Direct Charge (DC) purchase requisitions and orders for valves in Class 04.
PROPOSAL

Valves shall be in accordance with 04-SAMSS's -035, -048, at minimum, and other 04-SAMSS's as applicable.

Service: VALVES NOT IN FLARE ISOLATION SYSTEM SERVICES Tag No.

SOUR CRUDE OIL (3CS1P02)
P. O. # Enquiry n°: SA010-MR-005-Rev. A_012 Line Item #
ITEM 'A1.3.1
6/16/2019

10-01196-0001
DATE

JOB ORDER/EWO NO.

BOLTING SHALL BE ZINC PLATED BICHROMATED IN ACCORDANCE TO B633-FEZN12 SC.3 FINISH COLOR
CHROMATE TREATMENT TYPE II (ISO4042-12C FE OR ASTM F871 ) AND PAINTED WITH SAME PAINTING CYCLE OF
VALVES BODY. BEING BOLTING PAINTED WE CONSIDER GALVANISING AND/OR FLOUROPOLIMER COATING AS PER
DESIGN SECTION DOC. SAES-H-001 SECTION 7.1.G AS NOT NECESSARY BEING APPLICABLE TO UNPROTECTED BOLTING
REV. NO.

Valve Type: Industrial Standard:

C

BALL API 6D
BY/DATE
OTHER

Sub Type: SAMSS's (in addition to 04-SAMSS-035 & 04-SAMSS-048)

LONG PATTERN, FULL BORE, TRUNNION MOUNTED 04-SAMSS-051

Pressure Class: Size / Port:

CONST. AGENCY/DATE OPERATIONS/DATE

6/16/2019
REVIEW FOR KEY DRAWINGS

CLASS 300 4" TO 24"

REQUIRED (SAUDI ARAMCO)

HDS

End Connections: Operator Type:

FLANGED RF AS PER ASME B 16.5
GEAR OPERATED

Other: Vendor References: S7100.T.SF.300

9COM 6000000250
6/16/2019

DOUBLE BLOCK AND BLEED SAES-L-102

HHB

Firesafe: API 607 OR ISO 10497 AND NOT API-6FA Maximum Service Temperature 170 °F O O
( C or F)
O O
YES API 6FA NO Minimum Service Temperature -28 °F ( C or F)

Installation Orientation MAOP:

HORIZONTAL VERTICAL
Pipe: HOR / VER Valve Stem: VER / HOR
AS PER ASME B 16.34 PRESSURE RATING
CERTIFIED/DATE

6/16/2019
DESIGN CERTIFICATION

JNK
(DESIGN AGENCY)

MATERIALS SECTION
Body / Bonnel:
A350 LF2 CL.1 PLUS 3 mm SS316L WELD OVERLAY Stem:
ON CRITICAL AREAS ONLY A479 Tp 316/316L (OBTAINED BY ROLLED BAR)
ASTM A216 WCB SS316
ENGG./DATE

Seat / Inserts: Wedge / Disc / Ball / Plug:

SEAT UNIT: 'A182 F316/F316L
6/16/2019

(OBTAINED BY FORGING) A351 CF8M (OBTAINED BY CAST)

SSH

SS316 WITH RTFE

SEAT INSERTS
INSERT: RPTFE SS316

Packing / O-Rings: STEM PACKING: VITON GLT AED Bolting:

PLUS GRAPHITE AS FIRE SAFE AS
O-RINGS: VITON GLT AED BLTA320
STUDGr.W/2
L7MHVY
\ A194
HEXGr.NUT;ALLOY
7M (S3) STL ASTM A193 GR
FLEX GPH PKG PER DOC. 04-SAMSS-051
B7M/ASTM A194 GR 2HM
IS COVERED, FOR ALL APPROVAL

AND CERTIFICATION REQUIREMENTS, PER SAEP-334, UNDER

Gaskets / Seals: Coatings / Linings / Platings:

APCS 26 ACC. TO SAES-H-001 ON CARBON
SEALS: VITON GLT AED STEEL PARTS ONLY, NO
GRAPHITE
SPIRAL GASKETS
WOUND SS 316 AND GRAPHITE FLR EXTERNAL PAINTING ASCOATING ON
PER SAES-H-001 (APCS-26)
SS316 COMPONENTS
Sour Service Other:
YES NO VALVE INSPECTION AND TESTING AS PER API 598
REVISION VALIDATION

DRAWING COMPLETION CERTIFICATE NO.

DOC. 04-SAMSS-003 IS CONSIDERED AS NOT APPLICABLE

NOR BEING REQUIRED ON MATERIAL REQUISITION
SPECIAL NOTES SECTION
NOT BEING INDICATED WE HAVE SUPPOSED THAT
1. *Indicates information to be provided by vendor.
ALL VALVES ARE FOR ABOVE GROUND SERVICE,
2. Valve shall comply with the requirement of SAES-L-108 and SAES-L-105 ONSHORE INSTALLATION AND FOR MILD
3. Valve shall be suitable for sour service (NACE MR175/ISO 15156) ATMOSPHERIC EXPOSURE
THIS REVISION NO.

BALL VALVE (RF #300) DWG. TYPE PLANT NO. INDEX DRAWING NO. SHT. NO. REV. NO.

VALVE DATA SHEET DAT

PIPELINE REHABILITATION PROJECT 282 L PE-530101 032 C
UTHMANIYAH SAUDI ARABIA
EKRD/6233-1-1110.XLS
Saudi Aramco 6233-1-ENG (11/2010)

SAUDI ARABIAN OIL COMPANY

UNTIL CERTIFIED AND DATED

THIS REVISION IS NOT TO BE
USED FOR CONSTRUCTION
ISSUED FOR 100% PROJECT VALVE DATA SHEET
REVISION DESCRIPTION

THIS DRAWING AND THE INFORMATION CONTAINED HEREIN ARE THE SOLE PROPERTY OF SAUDI ARAMCO. NO REPRODUCTION IN FULL OR IN PART SHALL BE OBTAINED FROM THIS DOCUMENT WITHOUT THE WRITTEN CONSENT OF ITS OWNER.
Notes To Purchaser:

This form shall be used only for Direct Charge (DC) purchase requisitions and orders for valves in Class 04.
PROPOSAL

Valves shall be in accordance with 04-SAMSS's -035, -048, at minimum, and other 04-SAMSS's as applicable.

Service: VALVES NOT IN FLARE ISOLATION SYSTEM SERVICES Tag No.

SOUR CRUDE OIL (6CS1P02)
P. O. # Enquiry n°: SA010-MR-005-Rev. A_012 Line Item #
6/16/2019

ITEM 'A1.1.1
10-01196-0001
DATE

JOB ORDER/EWO NO.

BOLTING SHALL BE ZINC PLATED BICHROMATED IN ACCORDANCE TO B633-FEZN12 SC.3 FINISH COLOR
CHROMATE TREATMENT TYPE II (ISO4042-12C FE OR ASTM F871 ) AND PAINTED WITH SAME PAINTING CYCLE OF
VALVES BODY. BEING BOLTING PAINTED WE CONSIDER GALVANISING AND/OR FLOUROPOLIMER COATING AS PER
DESIGN SECTION
REV. NO.

DOC. SAES-H-001 SECTION 7.1.G AS NOT NECESSARY BEING APPLICABLE TO UNPROTECTED BOLTING
Valve Type: Industrial Standard:
C

BALL API 6D
BY/DATE
OTHER

Sub Type: SAMSS's (in addition to 04-SAMSS-035 & 04-SAMSS-048)

LONG PATTERN, FULL BORE, TRUNNION MOUNTED 04-SAMSS-051

Pressure Class: Size / Port:

CONST. AGENCY/DATE OPERATIONS/DATE

6/16/2019
REVIEW FOR KEY DRAWINGS

CLASS 600 4" TO 24"

REQUIRED (SAUDI ARAMCO)

HDS

End Connections: Operator Type:

FLANGED RF AS PER ASME B 16.5
GEAR OPERATED

Other: Vendor References: S7100.T.SF.600

9COM 6000000250
6/16/2019

DOUBLE BLOCK AND BLEED SAES-L-102

HHB

O O
Firesafe: API 607 OR ISO 10497 AND NOT API-6FA Maximum Service Temperature 170 °F ( C or F)
O O
YES API 6FA NO Minimum Service Temperature -28 °F ( C or F)

Installation Orientation MAOP:

Pipe: HORIZONTAL
HOR / VER VERTICAL
Valve Stem: VER / HOR AS PER ASME B 16.34 PRESSURE RATING
CERTIFIED/DATE

6/16/2019
DESIGN CERTIFICATION

JNK
(DESIGN AGENCY)

MATERIALS SECTION
Body / Bonnel: Stem:
A350 LF2 CL.1 PLUS 3 mm SS316L WELD OVERLAY
ON CRITICAL AREAS ONLY A479 Tp 316/316L (OBTAINED BY ROLLED BAR)
ASTM A216 WCB SS316
ENGG./DATE

Seat / Inserts: Wedge / Disc / Ball / Plug:

6/16/2019

SEAT UNIT: 'A182 F316/F316L

SSH

SS316 WITH(OBTAINED BY FORGING)

RTFE INSERTS A351 CF8M (OBTAINED BY CAST)
SS316
SEAT INSERT: RPTFE
Packing / O-Rings: STEM PACKING: VITON GLT AED Bolting:
PLUS GRAPHITE AS FIRE SAFE AS A320 Gr.
BLT STUD W/2L7M \ A194
HVY HEXGr. 7M (S3)
NUT;ALLOY STL ASTM A193 GR
O-RINGS: VITON
FLEX GPH GLT AED
PKG PER DOC. 04-SAMSS-051 B7M/ASTM A194 GR 2HM
IS COVERED, FOR ALL APPROVAL

AND CERTIFICATION REQUIREMENTS, PER SAEP-334, UNDER

Gaskets / Seals: Coatings / Linings / Platings:

APCS 26 ACC. TO SAES-H-001 ON CARBON
SEALS: VITON GLT AED STEEL PARTS ONLY, NO
GRAPHITE
SPIRAL GASKETS
WOUND SS 316 AND GRAPHITE FLR EXTERNAL PAINTING AS COATING ON
PER SAES-H-001 (APCS-26)
SS316 COMPONENTS
Sour Service Other:
YES NO VALVE INSPECTION AND TESTING AS PER API 598
REVISION VALIDATION

DRAWING COMPLETION CERTIFICATE NO.

DOC. 04-SAMSS-003 IS CONSIDERED AS NOT APPLICABLE

SPECIAL NOTES SECTION NOR BEING REQUIRED ON MATERIAL REQUISITION
1. *Indicates information to be provided by vendor. NOT BEING INDICATED WE HAVE SUPPOSED THAT
ALL VALVES ARE FOR ABOVE GROUND SERVICE,
2. Valve shall comply with the requirement of SAES-L-108 and SAES-L-105 ONSHORE INSTALLATION AND FOR MILD
3. Valve shall be suitable for sour service (NACE MR175/ISO 15156) ATMOSPHERIC EXPOSURE
THIS REVISION NO.

BALL VALVE (RF #600) DWG. TYPE PLANT NO. INDEX DRAWING NO. SHT. NO. REV. NO.

VALVE DATA SHEET DAT

PIPELINE REHABILITATION PROJECT 282 L PE-530101 035 C
UTHMANIYAH SAUDI ARABIA
EKRD/6233-1-1110.XLS
 07/21/2021

BALL VALVES - MANUAL

01196-SICIM-MR-005

SUBMISSION DATES OF REQUIRED DOCUMENTATION SHALL BE

DISCUSSED AND AGREEDED AFTER ORDER PLACEMENT
DURING KICK OFF MEETING OR BEFORE ORDER DURING FINAL
COMMERCIAL NEGOTATION BASED ON REQUIRED DELIVERY
AND WORKLOAD OF DOCUMENTATION DEPARTMENT.
HARD COPIES SHALL BE SUBMITTED DURING PHASE 603 ONLY