2012 Amana Tool Catalog
2012 Amana Tool Catalog
INDUSTRIAL TOOLING
REDEFINING WOODWORKING
®
An industry leader for more than 35 years, Amana Tool® specializes in
industrial quality solid carbide, carbide insert and carbide-tipped cutting
tools for the woodworking, plastics and aluminum industry providing
solutions to large factories, cabinet shops and hobbyists at all levels.
Amana Tool’s full line of industrial-quality woodworking tools includes
saw blades, router bits, shaper cutters, boring bits and more.
Amana Tool® was founded in 1972 and has its corporate headquarters
located in Farmingdale, New York, USA. We are recognized as a leading
tool provider for industries worldwide with products of the highest
quality and innovation.
Due to our vast experience, use of high-quality raw materials,
technological know-how and research & development, Amana Tool®
continues to provide solutions for the entire woodworking industry,
while meeting the challenges of materials in the marketplace, such as
MDF, solid surface, plastics, aluminum and other man-made materials.
Aside from our uncompromising engineering and quality, our customer service department provides outstanding sales and technical advice. Our
affiliation with master craftsman Lonnie Bird has helped us develop innovative tools and solutions for real projects that woodworkers have been long
awaiting. Our Q & A column on our website is thriving with real questions and solutions for today’s woodworker.
Relationships with large furniture plants have enabled us to develop new tooling that is both unique and on the cutting edge of technology - providing
real time solutions for heavy production cabinet and furniture manufacturers for nearly every application.
You can always count on our commitment to offer high quality, innovative products for all your woodworking needs.
WARNING: NO PART OF THIS CATALOG MAY BE REPRODUCED IN ANY BROWSE OUR CATALOG ONLINE
FORM WITHOUT PRIOR WRITTEN APPROVAL FROM THE AMANA TOOL®
For the latest tool information, tool setup, tips
CORPORATION HEADQUARTERS, NEW YORK. and techniques.
WARRANTY: ALL AMANA TOOL® PRODUCTS ARE WARRANTEED TO BE www.amanatool.com
FREE FROM DEFECTS IN MATERIAL AND/OR WORKMANSHIP, PROVIDED
THAT THE TOOLS ARE PROPERLY MAINTAINED AND THERE IS NO EVIDENCE
OF ABUSE OR MISUSE.
AMANA TOOL® IS NOT RESPONSIBLE FOR TYPOGRAPHICAL ERRORS.
ALL SPECIFICATIONS IN THIS CATALOG ARE SUBJECT TO CHANGE
WITHOUT NOTICE.
router bits rePLACeMeNt PArts sHAPer Cutters
1-188 189-206 269-312
Aluminun ................................................................26-27 Arbors / Hex Nuts / Screws / Keys ......................195-198 ™
Dado / Groover Set, Prestige Adjustable....................271
Beading...................................................................73,77 Ball Bearings, Steel & Ultra-Glide™ .....................192-194 Flooring ......................................................................292
Box Joint / Finger Joint / Drawer Lock ................119-121 Carbide Insert Knives ..........................................203-206 Instile & Rail™ System ................................................296
Bullose .........................................................................76 CNC Adapters / Holders / Retaining Studs ...........200-201 Raised Panel .......................................................306-312
Cabinet Door Edge ..............................................138-139 CNC Collets / Keys......................................................202 Stile & Rail, Reversible .......................................270-289
Chamfer..................................................................69-71 Replacement Parts Index.....................................190-191 Stile and Rail Sets...............................................292-305
CNC Feed Rates ..................................................184-185 Template Guide / Reduce Bushings ............................199 Wainscot / Paneling Cutters by Lonnie Bird .........290-291
Compression Spiral, Solid Carbide...........................13-17
Core Box / Bowl & Tray / Ball End ...........................60-63
Corner Round..........................................................72-76 boriNG/DriLLiNG bits iNsert
207-226
sHAPer Cutters
Diamond (PCD) Polycrystalline......................................16
Divided Light Door Set................................................150
Adjustable Countersink / Depth-Stops ........................225
Door Making, Cabinet..........................................130-153 313-334
Dovetail...............................................................111-115 Brad Point ...........................................................207-209
Carbide Tipped Countersinks...............................220-222 Arbors / Hex Nuts / Screws / Keys ......................195-198
EZ-Change™ (Ocemco)..................................................38
Countersinks for Boring Machines / Metric .................212 Ball Bearing Rub Collars / Bushings ....................332-334
Finger Grip / Door Lip..........................................158-160
Ditec™ ........................................................................211 Chamfer .....................................................................320
Flooring Solutions ...............................................128-129
Face Frame / Plug Cutter............................................223 Glue Joint...................................................................322
Flush Trim / No File™ / Dynabit™ ..............................32-37
Forstner Bits...............................................................226 Groover & Rabbet................................................314-318
Flush Trim, Solid Carbide.........................................39-40
Handrail / Table Edge ..........................................108-110 Hinge Boring .......................................................213-215 Instile & Rail™ System ................................................326
In-Groove,™ Insert CNC ...........................................52-53 Metric Boring Drills / Adapters & Bushings .................216 Lamello ......................................................................323
In-Tech,™ Insert.......................................................96-97 Plug Cutter / Face Frame............................................223 Lock Miter / Finger Joint .....................................320-321
Instile & Rail™ System / Stile & Rail Sets.............130-137 Replacement Chucks..................................................217 Profiles .......................................................................320
Invectra™ ......................................................................27 Rosette Cutter System ........................................218-219 Profile-Pro™ System / Replacement Knives .........327-331
Jointing Bits ...............................................................124 RTA Drills / Countersinks ............................................224 Raised Panel .......................................................323-324
Lock Miter / Edge Banding..................................122-123 Through Hole (‘V’ Point) ..............................................210 Spiral Planer / Jointing / Sanding Drum......................319
Lonnie Bird Projects ............................................152-157 Stile & Rail Sets..........................................................325
MDF Cabinet Door...............................................147-149 Tongue & Groove Sets ................................................326
Miniature Bits ...............................................................56 sAw bLADes
Molding / Edging.....................................................77-81 227-268
Molding / Multi Form.............................................98-107
Aluminum, Non-Ferrous Metal ....................................243 PLANer/joiNter
kNives/HAND tooLs
Mortising.................................................................28-31
Cut-Off / Crosscut ...............................................233-236
Nova™ System, Insert ..............................................82-83
Panel Pilot (Solid Carbide & HSS) ............................23-25 Dado Sets ...........................................................255-257
335-338
Plastic.....................................................................18-20 Ditec ...................................................................245-248
Edgebander Trim Saw.................................................248 Corrugated Back Steel................................................337
Plunge, Straight ........................................................2-12
EZ-Dial™ Scoring System............................................249 Dicut Laminate Cutter / Scrapers................................338
Profiling ..................................................................84-91
General Purpose / Combination...........................231-232 HSS Planer / Jointer Knives & Sets .....................335-336
Rabbet ....................................................................92-95
Groover ......................................................................258 Planer Knives ......................................................335-337
Raised Panel .......................................................140-146
Round Over Bead / Groove Plunge ..........................64-68 Hollow Ground ...........................................................239 Solid Carbide Planer Knives........................................337
Router Bit Introduction .................................................VIII Melamine & Laminate .........................................240-241
Router Bit Technology .........................................181-183 Miter / Double Miter............................................237-238
Router Bit Visual Index..............................................VI-VII Non-Ferrous Metal, Aluminum ....................................243 GeNerAL
Table of Contents
Safety Guidelines ................................................186-188
Signmaking & ‘V’ Groove.........................................48-57
Non-Melt, Plastic ........................................................242
Panel Saw & Conical ...........................................251-254
iNforMAtioN/iNDexes
Slot Cutter / EZ-Dial™ ..........................................116-118 Complete Alpha-Numeric Index ...........................339-345
Plate Joinery / Portable Blades............................258-260
Solid Carbide Spirals...............................................13-27 Conversion Table ........................................................346
Plastic, Non Melt ........................................................242
Solid Surface ......................................................161-180 Lonnie Bird Techniques.......................(Inside Back Cover)
Prestige™ ....................................................................228
Spiral Compression, Solid Carbide...........................13-17 Router Bit Visual Index..............................................VI-VII
Radial Arm / Holz-Her.................................................244
Spoilboard, Insert ....................................................46-47
Re-Boring ...........................................................262-263
Stile & Rail Sets / Instile & Rail™ System.............130-137
Reduction Bushings / Stabilizer / Stiffener..................261
Straight Plunge / Specialty Plunge ............................2-12
Rip / Glue Line ....................................................229-230
Stub Spindle & Cope...................................................151
Safety Guidelines ................................................266-268
T-Slot / Screw Slot / Amerock Hinge / Keyhole........58-59
Scoring.......................................................................250
Table Edge / Handrail ..........................................108-110
Solid Surface..............................................................241
Tambour Set .......................................................154-155
Technical Information..........................................264-265
Tongue & Groove / ‘V’ Panel ................................125-127
Trim / Solid Carbide Panel Pilot ...............................40-45
‘V’ Groove & Signmaking ........................................48-57
Window Sill ................................................................159
The specifications, current at time of publication, are intended for reference purposes and are subject to change without notice.
©2011 All rights reserved. No part of this catalog may be reproduced without written consent of Amana Tool Corp.
www.amanatool.com III
2-12 5 6 9-11 13-27 16 18-20
Straight Plunge CNC Production Shear CNC Insert Solid Carbide Spiral CNC Spiral Plastic
Straight Plunge Straight & Compression Diamond Compression ‘O’ Flute
21 22 23-25 26-27 28-31 32-33 34-36
Abrasive Plunge Patternmaking Panel Pilot Aluminum Spiral Mortising Flush Trim Flush Trim with
Fiberglass Flush Trim Carbide Tipped & HSS ‘O’ Flute Template Ball Bearing Guide
45460
47124
47144
45506
35 36 38 39-40 41,42,45 43-45 45
Router Bit Index by Product Type
Insert Trim No-File™ EZ-Change Solid Carbide Bevel Trim Solid Carbide Weatherseal Profile
& Insert Plunge Trim Spiral Trim Panel Pilot & Trim
51400
51202
47150
46-47 47 48-57 49,51 53 56 60
Spoilboard Mini Signmaking/Lettering ‘V’ Groove In-Groove Miniature Bits Bowl & Tray
Spoilboard
45726-CNC
45983
RC-1104
45724
61 62-63 64 65-67 66 69-71 70
Ball End Core Box Classical Groove Plunge Round Over Plunge Form Chamfer & CNC Insert
& Plunge Beading Chamfer Assemblies Adjustable Chamfer
49570
49706
49730
49400
45968
RC-1120
45920
45946-CNC
VI For a complete listing by product number, see numerical index on pages 290-293.
72-75 76 77-80 78,81,86 82-83 84 87-91
Corner Round & Bullnose Cove & Bead Classical & Ogee NOVA™ Convex Edging Edge Bead
Corner Round Assemblies Router Bit System & Hand Grip
54296
51580
54102
49506
51565
92-95 93 96-97 99 102-103 104-106 107
Rabbet CNC Insert in-Tech™ Base Molding Crown Molding Architectural & Multi-Form
Straight Rabbet Special Interest Molding
54299
54400
RC-49360
54222
54200
108-109 110 111-115 116-118 119-127 126 127
Router Bit Index by Product Type
Table Edge Handrail Dovetail E-Z Dial™ Joinery Window Sash Paneling
Slot Cutters
49554
45814
55340
54269
45660
55500
55392
128-129 132 130-137 136 138-139 140-146 144-145
Flooring Insert Mission Stile & Rail Insert Stile & Rail Door Edge Raised Panel Insert Raised Panel
Tongue & Groove
54227
55420
55420
RC-1130
RC-1130
146 147-149 150,151,157,158 152-157 159 160 161-180
Vertical Raised Panel CNC Glass Windows/Doors Lonnie Bird Projects Finger Grip Door Edge Solid Surface
MDF Cabinet Door Door Lip
53800
55300
55360
55360
57170
54520
RC-2480
RC-2480
For a complete listing by product number, see numerical index on pages 290-293. www.amanatool.com VII
Amana Tool ® Router Bits Manufactured According to European Safety Standard EN-847-1/2
Other Brands
49512 MAX RPM: 35000
BRAND
Safe Design
1.1mm
(.043")
Rotation
Rotation
high degree of precision in the production and the balance of the
tools. The purpose of the test is to ascertain whether it is ensured
that users or third parties, who are handling the tools properly are,
in fact, protected as far as possible from risk to life or health.
Tools for use in wood and plastic working are classified into two
groups: manual feed operations and mechanical feed operations.
• Each tool features “anti-kickback” chip limiter to prevent the tool
from “overfeeding” and kicking back the material to the machine
operator. The standard also determines the maximum distance
‘Manual feed’ describes the holding and/or guiding by hand of the
between the “anti-kickback” shape and the cutting edge.
workpiece or of a machine element incorporating a tool. Manual
• Protrusion of the knife from the supporting tool body is restricted feed includes the use of a hand-operated carriage, on which the
to prevent injury. workpiece is placed manually or clamped and the use of a
• Sharp corners on the supporting body of the knife are prohibited, demountable power feed unit.
preventing injury to the user in areas where there is no knife. Tools for manual operation marked ‘BG-TEST’ are designed
• Each tool has a maximum safe speed; calculated by a computer according to the following rules:
program, that takes into account the size of the cut profile, type a) Thickness of chip limit with a maximum cutting edge projection
of steel, shank size, tool balance and machine run-out. of 1.1mm (.043"), over the total length of the cutting profile;
• Different groups of tools are produced using various grades b) Restricted maximum chip clearance width, including the
of steel dictated by workload and material type. Tools are regrinding range as a function of the cutting flight circle;
made from raw material defined by the standard to support the
c) Kickback ratio must not exceed 0.25 Vr/Vs < 0.25
high demand of mechanical properties of woodworking tools.
(where Vs = cutting velocity and Vr = kickback velocity).
Special purpose tools which, for reasons of speed and economy,
cannot be inspected by the German Woodworking Trade Association
The term ‘Anti-Kickback’ has been an industry topic for quite some may be used manually, if they conform with the above requirements.
time and relates to cutting tools such as router bits, saw blades, etc.
There are several brands of ‘Anti-Kickback’ router bits presently on
the market and all of them, it seems, would offer some degree of
safety to the end-user because they limit the ‘chip-thickness’ of the ‘Mechanical feed’ means a feed mechanism for the workpiece or
material being cut. In other words, the cutting tool will take less of tool, which is integrated with the machine and where the workpiece
a ‘bite’, thereby decreasing the likelihood of a kickback. While this or machine element with incorporated tool are held and controlled
is true, however, it should be pointed out that there are significant mechanically during the machining operation.
details to be considered when designing, manufacturing and using All the tools may be used for mechanical feed operation. The rules
industrial cutting tools. that characterize manual feed operation tools do not apply to them,
except for the manufacturer’s label and maximum permitted speed.
The basic rules applying to manual feed operations do not apply to
router bits with diameters smaller than 16mm.
‘BG’ is an acronym for ‘Holz Berufsgenossenschaft’, the German
Woodworking Trade Association. For the sake of worker safety,
this esteemed group has established basic rules for the design,
manufacturing and use of cutting tools for the wood and plastic ‘BG’ Form is a term indicating cutting tools which have the same
industries. general circular shape of ‘BG’ Test tools, but which do not comply
These basic rules concern testing the working safety of with the strict regulations governing ‘BG’ Test as outlined above.
woodworking machine tools. They establish test procedures and (1.1mm cutting edge projection, restricted maximum chip clearance
indicate all essential regulations and rules of technology, which width etc.) There is a significant difference between the two.
need to be taken into account during testing. Precise geometric Unless specified otherwise, all router bits over
design, as well as the use of high quality materials and replacement 16mm (5/8") diameter in this catalog are ‘BG-TEST’. This does not
parts complying with DIN standards, will ensure a safe tool with a apply to CNC, Insert and tools with larger than 1/2" shank diameter.
Tool illustrations shown at actual size.
Straight
Plunge
Trimming
Signmaking
Grooving
StraiGHt pluNGe
In choosing a straight bit for any application, always select one with the shortest cutting edges and the shortest overall length that will
Profiling reach the required cut depth. Excessive length intensifies deflection and vibration, which degrade cut quality and lead to tool breakage.
A single-flute bit should be used where cut speed is more important than cut finish. Making one cut per revolution is faster than making
two or three. Improved chip clearance is possible with a single flute configuration. The result: fast cuts.
Architectural
d StraiGHt pluNGe
Carbide Tipped • Single Flute
Jointing 1/4" & 3/8" Shank
ØD B Ød L Tool No.
1/8 7/16 1/4 2 45100
L 3/16 7/16 1/4 2 45102
Flooring
1/4 1/2 1/4 2 45104
1/4 3/4 1/4 2 45106
1/4 1 1/4 2-1/4 45108
B 1/4 1 1/4 3-1/4 45110 *
1/4 3/4 3/8 2-5/16 45303
D 3/8 1 3/8 2-1/2 45300
Door
Making
* Specifically designed for air powered routers as used in
the boat manufacturing industry.
Solid Surface
d
Carbide Tipped • Single Flute
1/2" Shank
ØD B Ød L Tool No.
1/4 3/4 1/2 2-1/2 45304
45302
Router Bits
3/8 1 1/2 2-3/4
5/16 3/4 1/2 2-1/2 45306
L 1/2 3/4 1/2 2-3/8 45307
1/2 1-1/4 1/2 2-7/8 45308
1/2 1-1/2 1/2 3-1/8 45310
1/2 2 1/2 4-1/4 45312
Industrial Quality
B 1/2 2-1/2 1/2 4-3/8 45313
9/16 1-1/4 1/2 2-7/8 45314
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
2 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
StraiGHt pluNGe
Carbide Tipped • 2 Flute • 1/4" Shank
Straight
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, Plunge
eliminating vibration that degrades the cut finish. Two cuts per revolution yield
a smooth surface, but feed rate is slightly reduced.
ØD B Ød L Tool No.
Trimming
1.3mm 4.5mm 1/4 1-7/8 45260
1/16 3/16 1/4 1-5/8 45190 ~†
5/64 3/16 1/4 1-3/4 45191 ~†
3/32 1/4 1/4 1-3/4 45192 ~†
1/8 7/16 1/4 2 45200 ~† Signmaking
5/32 7/16 1/4 2 45201 ~ d
3/16 7/16 1/4 2 45202 ~
3/16 5/8 1/4 2-3/16 45239
13/64 3/4 1/4 2 45217 Grooving
7/32 3/4 1/4 2 45206
15/64 3/4 1/4 2 45203 L
1/4 1/2 1/4 2 45204
1/4 3/4 1/4 2 45208 Profiling
B
1/4 1 1/4 2-1/4 45210
1/4 1 1/4 2-7/8 45211 *
9/32 1 1/4 2-1/4 45212 D
5/16 3/4 1/4 2 45242
5/16 1 1/4 2-1/4 45214 Architectural
3/8 3/4 1/4 2 45216
3/8 1 1/4 2 45218S
3/8 1 1/4 2-1/4 45218
Jointing
3/8 1-1/4 1/4 2-1/2 45220
7/16 1 1/4 2-1/8 45222
15/32 3/4 1/4 2 45223
1/2 3/4 1/4 1-3/4 45224
Flooring
1/2 1 1/4 2-1/8 45226 d
1/2 1-3/16 1/4 2-5/8 RC-45226
1/2 1 1/4 2-13/16 45244
1/2 1-1/4 1/4 2-1/2 45245
9/16 3/4 1/4 2-1/8 45227
5/8 3/4 1/4 2 45228 Door
5/8 1 1/4 2-1/4 45247 Making
L
5/8 1-1/4 1/4 2-7/8 45249
11/16 3/4 1/4 2 45229
23/32 3/4 1/4 2 45231
3/4 3/4 1/4 2 45230 B Solid Surface
3/4 1 1/4 2-1/4 45251
13/16 3/4 1/4 2 45232
7/8 3/4 1/4 2 45234 D
1 3/4 1/4 2 45236 RC-45226
† Not guaranteed due to extremely small diameter.
* Not guaranteed due to extreme length. d
~ With solid carbide cutting edge.
Router Bits
Industrial Quality
Replacement Knife #AMA-30 (tool #RC-45226 - single flute).
StraiGHt pluNGe
Carbide Tipped • 2 Flute • 3/8" Shank L
ØD B Ød L Tool No.
3/8 1 3/8 2-1/2 45402
B
3/8 1-1/4 3/8 2-3/4 45400
3/8 1-1/4 3/8 3-3/8 45404
1/2 1 3/8 2-1/2 45406
D
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 3
ØD B Ød L Tool No.
1/4 3/4 1/2 2-1/2 ~
1/4 1 1/2 2-3/4
9/32 3/4 1/2 2-3/4
5/16 3/4 1/2 2-1/2
5/16 1 1/2 2-3/4
3/8 3/4 1/2 2-1/2
3/8 1 1/2 2-3/4
3/8 1-1/4 1/2 3 *
13/32 3/4 1/2 2-1/2
7/16 1-1/4 1/2 3
15/32 1-1/4 1/2 2-7/8
1/2 3/4 1/2 2-1/4
1/2 1 1/2 2-5/8
1/2 1-1/4 1/2 2-7/8
1/2 1-1/2 1/2 3-1/8
d 1/2 1-1/2 1/2 4-1/4
1/2 2 1/2 4-1/4
1/2 2-1/2 1/2 4-1/2 *
1/2 3 1/2 5-1/4
17/32 1-1/4 1/2 2-7/8
9/16 1-1/4 1/2 2-7/8
L 19/32 1-1/4 1/2 2-7/8
5/8 1 1/2 2-5/8
5/8 1-1/4 1/2 2-7/8
B 5/8 1-1/2 1/2 3-1/8
5/8 2 1/2 3-3/4
21/32 1-1/4 1/2 2-7/8
D 11/16 1-1/4 1/2 2-7/8
23/32 1-1/4 1/2 2-7/8
3/4 1 1/2 2-5/8
3/4 1-1/4 1/2 2-7/8
3/4 1-1/2 1/2 3-1/8
3/4 2 1/2 3-5/8
25/32 1-1/4 1/2 2-7/8
13/16 1-1/4 1/2 2-7/8
7/8 1-1/4 1/2 2-7/8
1 1-1/4 1/2 2-7/8
1 1-1/2 1/2 3-1/8
1 2 1/2 3-5/8 ! 22
1-1/16 1-1/4 1/2 2-7/8 ! 22
1-1/8 1-1/4 1/2 2-7/8 ! 22
1-1/4 1-1/4 1/2 2-7/8 ! 22
1-1/2 1-1/4 1/2 2-7/8 ! 18
1-1/2 1-1/4 1/2 2-7/8
1-3/4 1-1/4 1/2 2-7/8 ! 16
1-3/4 1-1/4 1/2 2-7/8
2 1-1/4 1/2 2-7/8 ! 12
Router Bits
2 1-1/4 3/4 3-1/2
* Not guaranteed due to extreme length.
~ With solid carbide cutting edge.
For post form countertop machines.
! Maximum RPM
! 12 =12,000;
! 16 =16,000;
! 18 =18,000;
Industrial Quality
! 22 =22,000
These tools have an open flute design (not anti-kickback) and are
intended for high feed-rate CNC machine use only.
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188.
With 10˚ Hook
These plunge bits are specifically designed for high production operations, where
long tool life is the primary concern. The higher hook angle produces a more
aggressive cutting action in dense and abrasive materials, including solid wood,
MDF, plywood, acrylics (Plexiglas®) and other difficult to machine materials. The d
result is a faster feed rate without significant compromise of cut quality.
ØD B Ød L Tool No.
1/8 7/16 1/4 2
1/4 1 1/4 2
3/8 1 1/2 2-3/4 L
1/2 1 1/4 2-1/8
1/2 1 1/2 2-5/8
1/2 1-1/2 1/2 3-1/8 B
1/2 2 1/2 4-1/4
3/4 1-1/4 1/2 2-7/8
D
d d
CNC
USE ONLY
For high-volume production work with a CNC router, use one of these
plunge-cutting straights. Long, 3/4" shanks extend the bit’s reach, enhancing
its versatility. Open-flute design promotes rapid chip clearance, necessary for
high feed rates. Right-hand configuration for standard clockwise rotation. Left-
hand configuration for counter-clockwise rotation “Topmaster” machines. L L
Tool No. Tool No.
ØD B Ød L LH RH
3/4 2 3/4 5
3/4 2-1/2 3/4 4-1/2 B B
3/4 1-1/4 3/4 3-1/4 —
Chipbreaker option (special order): Designed to cut chipboard and MDF at
high automatic feed rates found on CNC machines. Each flute is ground so that the
chipbreakers are staggered to each other, giving a straight cut. To order, add ‘CB’ D D
suffix (ie: #45454-CB).
Router Bits
Industrial Quality
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com
d Solid CarBide
Straight
StraiGHt pluNGe
Plunge Single Flute & 2 Flute
For high volume, high speed cutting in dense natural woods and abrasive wood
L composites, use solid carbide bits. Solid carbide dissipates heat more uniformly,
extending tool life. Single flute bits cut faster, with better chip clearance. Two-
Trimming B flute bits cut more slowly, but leave a smooth finish.
ØD B Flutes Ød L Tool No.
D 1/8 7/16 1 1/4 2 43700
3/16 7/16 1 1/4 2 43708
Signmaking 1/4 3/4 1 1/4 2 43716
d 1/4 1 1 1/4 2 43720
1/4 1 1 1/4 3 43724
5/32 7/16 2 1/4 2 43800
Grooving 3/16 1/2 2 1/4 2 43808
1/4 1/2 2 1/4 2 43812
1/4 3/4 2 1/4 2-1/2 43820
1/4 1 2 1/4 2-1/2 43824
Profiling L 1/4 1 2 1/4 2-7/8 43828
9/32 1 2 5/16 2-1/2 43832
5/16 1-1/8 2 5/16 3 43836
3/8 1-1/8 2 5/16 3 43840
B
1/2 1-1/8 2 1/2 3 43848
Architectural
1/2 1-5/8 2 1/2 3-1/2 43850
D r
! Warning: Maximum RPM 28,000
Jointing
Flooring
Door
d produCtioN SHear
Making Carbide Tipped • 2 Flute • 3° Down-Shear
Excellent for working composition board and melamine, this bit cuts with a
shearing action, slicing very slightly downward to prevent chipping & tearing of
the surface veneer or coating. It augers chips away from the router. Designed
Solid Surface primarily for production applications where the router is above the work.
L
ØD B Ød L Tool No.
3/8 1 1/2 2-3/4 45414-PS
1/2 1-1/4 1/2 2-7/8 45420-PS
B 1/2 1-1/2 1/2 3-1/8 45422-PS
1/2 2 1/2 4-1/4 45426-PS
Router Bits
D
Industrial Quality
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
6 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
oppoSite-SHear d
StaGGered tootH Straight
Carbide Tipped • 2 Flute Plunge
A stagger-tooth bit has two cutting edges, each only half the flute length, located
180° apart, one high, one low. The result is a tool that combines the speed and
chip clearance of a one-flute bit with the strength and balance of a two-flute bit.
This “opposite-shear” configuration features a down-shear edge and an up- Trimming
shear edge. On a through-cut, it shears down on both surfaces at the same time. L
It is excellent for working double-sided melamine, plywood, laminates, and
veneers, as well as solid-surface materials.
B
ØD B Ød L Tool No. Signmaking
1/2 1-1/2 1/2 3-1/8 51320
1/2 2 1/2 4-1/8 51324
D
Grooving
Profiling
left HaNd pluNGe d
Architectural
Carbide Tipped • 2 Flute • 1/2" Shank
This special series of plunging straight bits is for reverse-rotation
(counter-clockwise) routers. Jointing
ØD B Ød L Tool No.
L
5/16 1 1/2 2-3/4 45412-LH
3/8 1 1/2 2-3/4 45414-LH Flooring
1/2 1-1/4 1/2 2-7/8 45420-LH
1/2 1-1/2 1/2 3-1/8 45422-LH B
1/2 2 1/2 4-1/4 45426-LH
3/4 1-1/4 1/2 2-7/8 45440-LH
D
3/4 2 1/2 3-5/8 45441-LH
7/8 1-1/4 1/2 2-7/8 45446-LH Door
Making
Solid Surface
Super pluNGe™ d
With Center Carbide Tip
Router Bits
Industrial Quality
Carbide Tipped • 1/2" Shank • 2 Flute
This bit’s specially designed carbide center tip enhances the speed of
plunge cuts. At the same time, it extends the life of the cutting edges by Center Carbide Tip
reducing the stress of plunge cuts on their tips. Ideal for mortising and L
other plunging operations.
ØD B Ød L Tool No.
1/2 1-1/2 1/2 3-1/8 41422 B
1/2 2 1/2 4-1/4 41426
3/4 1 1/2 2-5/8 41438
D
1 1 1/2 2-5/8 41448
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 7
d d
metriC StraiGHt pluNGe
For Undersized Plywood Dado
Straight
Plunge Carbide Tipped • 2 Flute
Actual
L ØD Plywood Thickness B Ød L Tool No.
L 10mm — 19mm 1/4 2-1/8 45219
Trimming 18mm 18mm 3/4 1/4 2 45256
B 10mm — 19mm 1/2 2-1/2 45417
B 12mm 12mm 1-1/4 1/2 2-7/8 45488
D 14mm — 25mm 1/2 2-5/8 45431 *
18mm 18mm 1-1/4 1/2 2-7/8 45498
Signmaking
D * 14mm bits for cutting plastic pilaster.
Note: Many standard metric plunge bits from 3mm through 51mm are available on
special order. Please allow 2 to 3 weeks for delivery. See above for metric sized
plywood bits.
Grooving
Note: For 6mm board, use #45203 (15/64) shown in fractional section below and on
page 3.
Profiling
Architectural
Jointing
d
uNderSized plywood dado
Carbide Tipped • 2 Flute
Flooring
Straight Plunge Fractional Sizes
Cut dado and groove dimensions perfectly for plywood, flakeboard and other
sheet materials for which standard size bits are too large.
L
Actual
Door ØD Plywood Thickness B Ød L Tool No.
Making 15/64 1/4 minus 1/64 (6.0mm) 3/4 1/4 2 45203
B
7/32 1/4 minus 1/32 3/4 1/4 2 45206
15/32 1/2 minus 1/32 3/4 1/4 2 45223
D
15/32 1/2 minus 1/32 1-1/4 1/2 2-7/8 45425
Solid Surface 19/32 5/8 minus 1/32 1-1/4 1/2 2-7/8 45437
23/32 3/4 minus 1/32 3/4 1/4 2 45231
23/32 3/4 minus 1/32 1-1/4 1/2 2-7/8 45445
Note: For 6mm board, use #45203 (15/64) shown in fractional section above.
Router Bits
Industrial Quality
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
8 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
iNSert CarBide StraiGHt d d
Single Flute & 2 Flute
Straight
Repl. Repl. Plunge
ØD B Ød L Flutes Knives Screws Tool No.
1/2 30mm 1/2 3 1 AMA-30† 67117 RC-1154
1/2 30mm 1/2 3 1 AMA-30† 67117 RC-1154-LH **
7/8 50mm 1/2 4-1/8 1 RCK-50 67117 RC-1166 L Trimming
5/8 30mm 1/2 3-3/8 2 AMA-30† 67117 RC-1080 L
5/8 50mm 1/2 4-1/8 2 AMA-30† 67117 RC-1082 *
3/4 30mm 1/2 3-3/8 2 RCK-30 67115 RC-1084
3/4 50mm 1/2 4-1/8 2 RCK-30 67115 RC-1086 * B
7/8 30mm 1/2 3-3/8 2 RCK-30 67115 RC-1088 Signmaking
B
* 50mm cutting edge is achieved using two 30mm staggered knives.
** Left hand rotation. D
† Optional knife with harder carbide for MDF applications: MDF-30.
#5005 Torx® key included. D Grooving
Note: All above plunge bits have four cutting edges per knife.
Metric sizes from 12mm to 22mm available on special order — please inquire.
Profiling
Standard plunge technique For best results with 2-flute
or use ramping method as tools, a ramping technique
shown at right. such as this is recommended
for CNC applications.
AMA-30 RCK-30 RCK-50
Architectural
MDF-30†
Jointing
d
iNSert CarBide StraiGHt Flooring
Single Flute & 2 Flute
These router bits yield cuts which are cleaner than typical insert bits, offering
high speed cuts with super clean finish. They also are channel set, double edge RCK-34
knives. Each blade has a double-sided cutting edge for economy. The insert L
carbide is much harder than brazed carbide. There is minimum amount of
downtime for blade changes. Door
Making
Repl. Repl. B
ØD B Ød L Flutes Knives Screws Tool No.
3/8 20mm 1/2 2-7/8 1 RCK-32 67015 RC-3100
Solid Surface
1/2 30mm 1/2 3-1/8 1 RCK-34 67016 RC-3110 D
1/2 30mm 1/2 3-1/8 2 RCK-34 67016 RC-3200
Replacement 1.5mm special hex key #5011.
eCoNomy iNSert CarBide
Router Bits
Industrial Quality
StaGGered pluNGe
2 Flute AMA-12
Staggered insert knives along with a fixed plunge knife (see diagram), utilizes
4-sided carbide inserts. Economically priced.
L
Repl.
ØD B Ød L Knives Tool No.
B
3/4 3/4 1/4 2 AMA-12 RC-1024
Replacement screws #67115. #5005 Torx® key included.
D
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 9
d
CNC
USE ONLY
This group of router bits are not designed to plunge. Using the “ramping
technique” the router is eased in and routes. Available in three different
grades of carbide for various applications.
Repl. Repl. T.C.
ØD B Flutes Ød L Screw Knife Tool No.
L
1/2 30mm(1-3/16) 1 3/4 3-1/4 67117 AMA-30†
5/8 30mm(1-3/16) 1 3/4 3-3/8 67117 RCK-30
5/8 30mm(1-3/16) 2 3/4 3-3/8 67117 AMA-30†
3/4 50mm(2) 1 3/4 4-1/8 67115 RCK-50
3/4 30mm(1-3/16) 2 3/4 3-3/8 67115 RCK-30
3/4 50mm(2) 2 3/4 4-1/8 67115 RCK-30 *
7/8 30mm(1-3/16) 1 3/4 3-3/8 67115 RCK-30
B 7/8 50mm(2) 1 3/4 4-1/8 67115 RCK-50
7/8 30mm(1-3/16) 2 3/4 3-3/8 67115 RCK-30
! Recommended RPM 14,000-18,000
All above two flute router bits have two cutting edges per knife.
D * 50mm cutting edge is achieved using two 30mm staggered knives.
† Optional knife with harder carbide for MDF applications: MDF-30.
RC-2080
Ramping Technique
d
CNC
USE ONLY
Tested by many of the world’s largest furniture manufacturers, these new CNC
router bits yield cuts which are cleaner than typical insert bits. Unlike the other
style of straight insert bits this category has a channel whereby the carbide is
inserted and tightened. This tool is specifically suited for peripheral work.
L Available with double and triple flutes.
Router Bits
Repl. T.C.
B
ØD B Flutes Ød L Knife Tool No.
5/8 30mm(1-3/16) 2 3/4 3-1/4 RCK-34
5/8 50mm(2) 2 3/4 4 RCK-36
D
3/4 30mm(1-3/16) 2 3/4 3-1/4 RCK-34
3/4 50mm(2) 2 3/4 4 RCK-36
Industrial Quality
3/4 30mm(1-3/16) 3 3/4 3-1/4 RCK-34
3/4 50mm(2) 3 3/4 4 RCK-36
3/4 30mm(1-3/16) 3 5/8 3-1/4 RCK-34
3/4 50mm(2) 3 5/8 4 RCK-36
! Maximum RPM 18,000
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188.
d
CNC
USE ONLY
This router bit is designed for fast and direct penetration into the material and
quick removal of wood, MDF, melamine and man-made material.
Repl. T.C. Repl. T.C. Max
ØD B Ød L Teeth Knife Knife RPM Tool No.
40mm(1-1/2) 29.5mm(1-5/32) 3/4 100mm(4) 2+2 RCK-30 AMA-12 18,000 L
Replacement Screw #67115.
B
D
d
With Plunge Center Tip
This router bit is designed for fast and direct penetration into the material and
quick removal of wood, MDF, melamine and man-made material.
Repl. T.C. Repl. T.C. Max
ØD B Ød L Knife Knife RPM Tool No.
5/8 30mm(1-3/16) 1/2 81mm(3-3/16) RCK-35 AMA-12 24,000
18mm(23/32) 50mm(2) 3/4 125mm(5) RCK-162 RCK-50 18,000
L
These tools have an open flute design (not anti-kickback) and are
intended for high feed-rate CNC machine use only.
D
d
CNC
USE ONLY
Insert straight router bit complete with two up/down-shear flutes and center tip.
Shear flutes squeeze the material into the middle to give an extra fine finish on
both surfaces of laminated and veneered board. Replaceable inserts ensure a
constant cutting diameter and finish quality. Center tip for improved boring. For
use on routers with CNC control.
Router Bits
Industrial Quality
L
Repl. T.C. Max
ØD B Ød L Knife RPM Tool No.
20mm(25/32) 30mm(1-3/16) 3/4 110mm(4-11/32) RCK-16 18,000
20mm(25/32) 50mm(2) 3/4 130mm(5-1/8) RCK-28 18,000 B
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com
d
CNC
USE ONLY
Insert straight router bit complete with two flutes and multiple cutting blades.
Blades are sheared up and down to ensure a good finish on both top and bottom
surfaces of laminated and veneered boards. For use on routers and machining
centers with CNC control.
# of Repl. T.C. Max
ØD B Ød L Knives Knife RPM Tool No.
L 22mm(7/8) 42mm(1-11/16) 3/4 115mm(4-9/16) 4 AMA-12 18,000
22mm(7/8) 62mm(2-7/16) 3/4 135mm(5-5/16) 6 AMA-12 18,000
B
D
RC-4204
d
CNC
USE ONLY
Insert straight router bit with multiple cutting flutes. Suitable for rough rabbeting
and sizing in softwood, hardwood and man-made boards (with or without
coating). Multiple cutting flutes ensure fine chips are produced for improved
waste extraction. Replaceable inserts ensure a constant cutting diameter.
For use on routers and machining centers with CNC control.
L # of Repl. T.C. Max
ØD B Ød L Knives Knife RPM Tool No.
50mm(2) 56mm(2-13/64) 3/4 113mm(4-1/2) 10 AMA-12 18,000
D
Router Bits
Industrial Quality
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188.
Straight
Plunge
Trimming
Signmaking
Grooving
SOLID CARBIDE Up-Cut Down-Cut
SPIRAL FLUTE PLUNGE d d
Profiling
2 Flute
Spiral-flute bits combine a shearing action in cutting with an augering action in
chip clearance. The shearing action yields an especially clean, accurate cut,
while the augering action clears chips from the cut.
Architectural
The ‘Up-Cut’ shears from the bottom up, pulling chips from the bottom up, thus
allowing deeper penetration with less stress on the tool. An excellent choice for
mortising. The ‘Down-Cut’ cuts from the surface down, leaving a smooth edge at
the surface. L
Jointing
Special unique carbide grade, increased clearance geometry and razor-sharp
cutting edges with polished flutes, provide a superior finish and longer tool life,
especially in abrasive materials. Great for production settings and excellent for
creating grooves and dado cuts in softwood, hardwood, plywood and composite B
materials. Primarily used on CNC machines and other automatic routers. Can be Flooring
used with handheld and table-mounted portable routers.
‘Up-Cut’ ‘Down-Cut’ D D
ØD B Ød L Tool No. Tool No.
1/8 1/2 1/4 2 46100 46200
5/32 5/8 1/4 2-1/2 46310 46410 Door
Making
3/16 3/4 1/4 2 46101 46201
7/32 1 1/4 2-1/2 46314 46414
1/4 3/4 1/4 2-1/2 46102 46202
1/4 1 1/4 2-1/2 46315 46415
Solid Surface
1/4 1-1/8 1/4 3 46316 46416
5/16 1 5/16 2-1/2 46115 46215
5/16 1 1/2 3 46119 46219
9/32 1 5/16 2-1/2 46317 46417
9/32 1 1/2 3 46117 46217
5/16 1-1/8 1/2 3 46318 —
5/16 1-1/8 5/16 3 46319 46419
46103 46203
Router Bits
Industrial Quality
3/8 1 3/8 2-1/2
3/8 1-1/4 3/8 3 46320 46420
3/8 1-1/4 1/2 3 46104 46204
7/16 1-1/4 1/2 3 — 46205
1/2 1-1/4 1/2 3 46106 46206
1/2 1-5/8 1/2 3-1/2 46107 46207
5/8 1-5/8 5/8 3-1/2 46108 46208 H
5/8 2 5/8 4 46121 46221 H
H Warning: These tools have an open flute design (not anti-kickback) and are
intended for high feed-rate CNC machine use only. Do not use in portable routers. For CNC router bit
feed rate info refer
to pages 184–185.
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 13
Up-Cut Down-Cut
SOLID CARBIDE
SPIRAL FLUTE PLUNGE
d d
Straight
Plunge FOR SOLID WOOD
2 Flute
Specially designed for speed and finish when working with solid hardwood. The
combination of acute spiral flute shear angles with face ground helix yield high feed
Trimming rates, fast plunge action, quick direction changes, deep penetration and mirror finish.
L ‘Up-Cut’ ‘Down-Cut’
ØD B Ød L Tool No. Tool No.
1/8 1/2 1/4 2 46241 46341
Signmaking
3/16 5/8 1/4 2 46245 46345
B 7/32 1 1/4 2-1/2 46247 46347
1/4 3/4 1/4 2-1/2 46249 46349
1/4 1 1/4 2-1/2 46248 46348
Grooving
1/4 1-1/8 1/4 3 46250 46365
D D 9/32 1 5/16 2-1/2 46251 46351
5/16 1-1/8 1/2 3 46253 46353
Profiling 3/8 1-1/4 1/2 3 46257 46357
3/8 1-1/4 3/8 3 46259 46359
1/2 1-1/4 1/2 3 46261 46361
1/2 1-5/8 1/2 3-1/2 46263 46363
r
! Warning: Recommended RPM 20,000-21,000
Architectural
Up-Cut Down-Cut
d d
Jointing SOLID CARBIDE
SPIRAL FLUTE PLUNGE
3 Flute
Flooring New three-flute design for very high quality finish. ‘Up-Cut’ or ‘Down-Cut’ spiral.
L
‘Up-Cut’ ‘Down-Cut’
ØD B Ød L Tool No. Tool No.
3/8 1-1/4 1/2 3 46114 46214
1/2 1-1/2 1/2 3-1/2 46116 46216
Door B 1/2 2 1/2 4 46118 46218
Making
r
! Warning: Recommended RPM 20,000-21,000
D D
Solid Surface
d SOLID CARBIDE
COMPRESSION SPIRAL FLUTE
FOR MDF/LAMINATE
Solid carbide compression spiral bits are designed for CNC applications
requiring high feed rates and a clean finish. Particularly suitable for
double-sided melamine or laminated material. Choose either single flute
Router Bits
L for the highest possible feed rate or double flute for the best finish. Special
unique carbide for longer lifetime in abrasive material.
Single Flute
ØD B Ød L Tool No.
B 1/4 7/8 1/4 2-1/2 46140
Industrial Quality
1/2 1-1/4 1/2 3 46159
1/2 1-5/8 1/2 3-1/2 46160
D 3/4 2 3/4 4 46168 H
r
! Warning: Recommended RPM 20,000-21,000
H Warning: These tools have an open flute design (not anti-kickback) and are
intended for high feed-rate CNC machine use only. Do not use in portable routers.
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
14 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
SOLID CARBIDE d
COMPRESSION SPIRAL FLUTE Straight
FOR MDF/LAMINATE Plunge
2 Flute
ØD B B1 mm Ød L Tool No.
1/8 13/16 7/32" 1/8 2-1/2 46180 † L Trimming
1/4 7/8 7 1/4 2-1/2 46170
1/4 7/8 7 1/4 2-1/2 46170-LH *
3/8 1-1/4 9 3/8 3 46172
3/8 1 9 1/2 3 46174
B
3/8 1-1/8 9 1/2 3 46178 Signmaking
B1
1/2 1 9 1/2 3 46182
1/2 1-1/8 10 1/2 3 46186 D
1/2 1-1/4 9 1/2 3 46188
1/2 1-1/4 9 1/2 3 46188-LH * Grooving
1/2 1-1/2 12 1/2 3-1/2 46189
1/2 1-5/8 11 1/2 3-1/2 46190
1/2 1-5/8 11 1/2 3-1/2 46190-LH *
1/2 1-1/2 7/16" 1/2 4-1/16 46191 Profiling
5/8 2 17 5/8 4 46194 H
r! Warning: Recommended RPM 20,000-21,000
* Indicates LEFT HAND ROTATION
H Warning: These tools have an open flute design (not anti-kickback) and are Architectural
intended for high feed-rate CNC machine use only. Do not use in portable routers.
† Optional 1/4" diameter sleeve/adapter #47632, see page 57.
Jointing
Flooring
SOLID CARBIDE d d
COMPRESSION SPIRAL FLUTE
FOR MORTISING WORk Door
2 Flute Making
These tools have a much shorter up-cut section than the standard compression
tools. They are ideal for mortising, grooving and dado. L
ØD B B1 Ød L Tool No. Solid Surface
L
1/4 1 1/8 1/4 2-1/2 46350
3/8 1-1/4 3/16 1/2 3 46352 B
3/8 7/8 1/8 3/8 3 46367
1/2 1-1/4 1/4 1/2 3 46354 B1
1/2 1-5/8 1/4 1/2 3-1/2 46356 D B
2 Flute
r
! Warning: Recommended RPM 20,000-21,000
Router Bits
Industrial Quality
B1
3 Flute
3 flute design provides an extra-smooth finish. D
3 Flute
ØD B B1 Ød L Tool No.
3/8 1 3/16 3/8 3 46020
1/2 1 1/4 1/2 3 46022 Top View
1/2 1-3/8 1/4 1/2 3-1/2 46024
r
! Warning: Maximum RPM 28,000
For CNC router bit
feed rate info refer
to pages 184–185.
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 15
d CNC
USE ONLY
If you’re looking for the ultimate in tooling, you’ve found it. Our Polycrystalline
L1 Diamond tooling will cut a wide variety of tough, abrasive materials including
particleboard, medium density fiberboard (MDF), plywood and plastic. The cutting
L edges last up to 200 times longer than carbide. In the long run, Polycrystalline
Diamond is the most economical choice.
B
With Carbide Plunge Point. Right Hand Rotation
D
Diamond tipped router bit for grooving, jointing & rabbeting in composite
materials (particleboard, MDF both raw or with melamine, veneer, hardwood,
etc). Up/Down-shear for double sided material. Resharpening one to two times.
FEED RATE*
(Chipboard with Plastic Coating)
mm/min inches/min
ØD B Ød L1 L Max RPM From Up To From Up To Tool No.
1/2 1 1/2 1-3/8 2-3/4 30,000 5,400 9,000 213 354
1/2 1-3/8 1/2 1-3/4 3-3/4 30,000 5,040 8,400 198 331
5/8 1 1/2 1-3/8 2-7/8 27,000 6,300 9,450 248 372
5/8 1-5/8 5/8 1-3/4 4 27,000 3,600 5,400 128 170
3/4 1 3/4 2 3-3/8 24,000 7,560 10,080 298 397
3/4 1-3/8 3/4 2 3-3/4 24,000 6,660 8,880 262 350
* Multipliers for different materials:
Max RPM x 1.1%.
Max RPM x 0.7%.
Max RPM x 0.8%.
d
3 flute design provides an extra-smooth finish.
ØD B B1 mm Ød L Tool No.
L 3/8 1-1/8 9 3/8 3
1/2 1-1/4 9 1/2 3
Router Bits
1/2 1-5/8 9 1/2 3-1/2
! Maximum RPM 28,000
B
Industrial Quality
B1
Top View
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188.
SOLID CARBIDE d
COMPRESSION SPIRAL FLUTE Straight
FOR SOLID WOOD Plunge
Single Flute
Specially designed for working in hard solid wood. Slow helic, special grinding
angle, improved body shape in order to support the high feed rate, quick
Trimming
direction changes and deep penetration. L
ØD B Ød L Tool No.
1/4 7/8 1/4 2-1/2 46390
3/8 1-1/8 1/2 3 46392 B
Signmaking
D
Grooving
SOLID CARBIDE Up-Cut Down-Cut
Profiling
SPIRAL FLUTE ROUGHING d d
With Chipbreaker
3 Flute
This series has a small chipbreaker, therefore the quality of cut will improve. It Architectural
will leave a smaller striated finish than the following series for massive wood.
‘Up-Cut’ ‘Down-Cut’ L
ØD B Ød L Tool No. Tool No.
Jointing
1/2 1-1/8 1/2 3 46132 —
1/2 1-5/8 1/2 3-1/2 46134 46234
B Flooring
D D
Door
Making
SOLID CARBIDE Up-Cut Down-Cut
SPIRAL FLUTE ROUGHING d d
With Chipbreaker Solid Surface
3 Flute
Specially designed for high RPM/feed rate CNC routers. Unique chipbreaker
design is available with ‘Up-Cut’ or ‘Down-Cut’. Will leave a wavy, striated finish.
‘Up-Cut’ ‘Down-Cut’ L
ØD B Ød L Tool No. Tool No.
1/2 1-5/8 1/2 3-1/2 46124 46224
Router Bits
Industrial Quality
1/2 2 1/2 4 46126 46226
3/4 2-1/4 3/4 4 46130 46230 H
r
! Warning: Recommended RPM 20,000-21,000 B
H Warning: These tools have an open flute design (not anti-kickback) and are
intended for high feed-rate CNC machine use only. Do not use in portable routers.
D D
For CNC router bit
feed rate info refer
to pages 184–185.
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 17
Up-Cut
d
Down-Cut
d
L Produce super clean, smooth cuts, especially in acrylic materials (Plexiglas,®
Lucite®), other plastics and wood. Bits are made according to strict tolerances from
an exclusive carbide grade and polished to a mirror finish using Amana’s unique
B process. Designed to eject chips either up or down. Ideal for industrial applications
and CNC machines. Right hand helix, right hand cut.
D D
Great For Cutting:
Plunge
‘Up-Cut’ ‘Down-Cut’
ØD B Ød L Tool No. Tool No.
1/8 1/2 1/8 2
3/16 5/8 3/16 2
1/4 3/4 1/4 2
1/4 1 1/4 2-1/2
Edge Contour
! Maximum RPM 35,000
Router Bits
Feed Rate Chart
ØD=1/4"
Feed (inch/min)
ØD=3/16"
Industrial Quality
ØD=1/8"
Cutting depth (inch)
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188.
TM
MAX
MIN
CNC INSERT CUT & QUAD CHAMFER SYSTEM
The Most Innovative time saving system
for cutting and chamfering in plastics.
Thirteen unique insert knife profiles produce smooth, chip-free cuts and last at
least twice as long as comparable solid carbide bits.
These industrial quality knives allow the user to both cut & chamfer the top
and bottoms of Plexiglas® or styrene sheets in one action. The knives fit the
In-Groove™ tool bodies – both the 1/4" shank #RC-1075 and the 1/2" shank
#RC-1076, which are expertly balanced to provide superior cutting results.
For more information visit
Up-Cut
d
Down-Cut
d
Provides smooth finish in acrylic materials, and both soft and hard plastics.
‘Up-Cut’ ‘Down-Cut’
ØD B Ød L Tool No. Tool No. L
1/4 3/4 1/4 2-1/2
1/4 1 1/4 2-1/2
B
D D
Up-Cut
d
Down-Cut
d
Specially designed to provide an excellent finish in hardwoods, solid surface and
hard plastics. Choose ‘Up-Cut’ if an excellent finish on the bottom of surface is
required, or ‘Down-Cut’ for an excellent finish on the top of surface.
‘Up-Cut’ ‘Down-Cut’
ØD B Ød L Tool No. Tool No.
L
3/8 1 3/8 2-1/2 —
1/2 1 1/2 3
! Recommended RPM 20,000-21,000
B
D D
For fast cutting in harder more abrasive plastics such as phenolic resin,
acrylic, etc. d
Router Bits
Industrial Quality
ØD B Flutes Ød L Tool No.
3/16 1/2 1 1/4 2
1/4 1 1 1/4 2-1/4
3/8 1 1 3/8 2-1/2 L
1/2 1-1/4 1 1/2 3
B
3/16 1/2 2 1/4 2
1/4 1 2 1/4 2-1/4
D
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com
d d
For Shaping Composite Panels
L
L Designed for cutting aluminum/plastic sandwich materials like
etc. with a 90º angle and flat bottom. These bits are widely used as
cladding for many diverse applications such as office buildings, hospitals,
convention centers, airports, hotels. Routing V-shaped grooves, whereby the
a° B
B aluminum cover and a part of the polyethylene core is removed, allows folding
D1 a° the remaining material by hand.
D D1
D ØD ØD1 a° B Ød L Tool No.
90° 1135°
35° 1/2 0.090 45° 3/8 1/4 2
3 1/2 0.090 45° 3/8 1/2 2
23/32 — 22.5° — 1/4 2-1/4
90°
45°
45792/45794 45798
Please refer to page 243 for saw blades to cut aluminum, plastic and
sandwich materials like Alucobond,® Dibond® etc.
d
New solid carbide tools with unique circular ‘O’ flute design to eject chips more
easily. Single flute for fast cutting in soft plastics such as PVC, styrene, ABS, etc.
ØD B Flutes Ød L Tool No.
L
1/8 1/2 1 1/4 2
3/16 5/8 1 1/4 2
1/4 3/4 1 1/4 2-1/2
Router Bits
B 1/4 1 1 1/4 2-1/2
1/4 1 1 1/4 3-1/4
1/2 1 1 1/2 3
D
1/8 1/2 2 1/4 2
Industrial Quality
3/16 5/8 2 1/4 2
1/4 1 2 1/4 2-1/2
3/8 1 2 3/8 2-1/2
1/2 1 2 1/2 3
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188.
d
Special grade solid carbide bits feature unique grinding and multi spiral flute
design. Suitable for ‘roughing’ cuts in hard and abrasive composite materials L
such as: , , etc. Special grade carbide for
maximum durability. Down-Cut for better clamping when machining small
work pieces and improved finish on the top of the board. For use on routers
and CNC machines.
B
ØD B Ød L Tool No.
1/4 1 1/4 2-9/16
D
1/2 1-21/32 1/2 3-1/4
Please refer to the top of page 235 for saw blades to cut hard and abrasive composite materials such as Trespa,® etc.
d
This bit is designed especially for cutting , tile and other highly
abrasive materials. Works well on epoxies made with carbon, glass and L
composite materials. Its diamond-pattern cutting edges have ‘Up-Cut’ and
‘Down-Cut’ angles to grind through the work. Cuts evenly in all directions.
ØD B Ød L Type of Cut Tool No.
B
1/4 3/4 1/4 2 Fine
1/4 3/4 1/4 2 Coarse
Router Bits
Industrial Quality
! Maximum RPM 28,000 D
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com
d
SOLID CARBIDE
FIBERGLASS
Plastic
Cutting & CARBON FIBER
CUTTING FLUSH TRIM
Used in the boat and RV industry to trim laminated fiberglass boards. Cuts fast
and clean.
Trimming
ØD B Ød L Tool No.
1/2 1-3/4 1/2 4-1/4 44100
L
Replacement Bearing #47706 (2)
Signmaking B Replacement Nut #67086
Grooving
D
Profiling
Architectural
Jointing
Flooring
d d
3,̊ 5˚ & 7˚ PATTERNMAkERS
Carbide Tipped • 2 Flute
This slightly tapered bit is specifically designed for wood patternmaking,
especially wood vacuum-forming molds where draft (3,° 5° and 7° taper) is
Door required for releasing the styrene or other plastic from the mold. It can be
Making used to bevel the leading edge on a door.
D L ØD ØD1 a° B Ød L Tool No.
1/2 3/8 3° 1-1/4 1/2 3-1/8 42420
Solid Surface
D 19/32 3/8 5° 1-1/4 1/2 3-5/32 42422
B L 13/16 3/8 7° 1-1/4 1/2 3-5/32 42424
a˚ 3/4 1/2 3° 2-1/8 1/2 4-5/8 47144 *
* Not for use in CNC machines.
D1 B Replacement bearing for #47144 use #47706.
a˚
Router Bits
D1
47144
Vacuum-forming
mold (wooden)
Industrial Quality
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
22 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
Straight
Plunge
Trimming
Signmaking
Grooving
Profiling
PANEL PILOT d
Carbide Tipped • Single Flute
Heat Treated Architectural
These panel pilot bits have a pointed tip for plunge cuts and a special grind for
speed and an integral solid pilot. It is designed for fast cut-out work and is used
extensively in the mobile home & RV industries. The single-flute version cuts fast
and produces an excellent finish. Jointing
L
ØD B Ød L Tool No.
1/4 3/4 1/4 2-1/2 45506 B
3/8 1 1/4 2-7/8 45507 Flooring
3/8 1 3/8 3 45508
1/2 1-3/16 1/2 3-5/8 45510
1/2 2 1/2 4-3/4 45511
D
Door
Single Flute Making
Solid Surface
Router Bits
Industrial Quality
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 23
d
STAGGER TOOTH
Straight
PLUNGE PANEL
Plunge With Center Pilot
Carbide Tipped • Heat Treated
This version of the panel pilot bit has a stagger-tooth configuration for fast,
clean cuts, coupled with a solid pilot between the cutting edges. Designed
Trimming specifically for the RV-manufacturing industry to cut openings in ceilings and
B2 sidewalls, it can be used in any setup that has a template between the materials
L to be cut.
ØD B E F B1 B2 Ød L Tool No.
Signmaking E F B 1/2 2-13/16 3/8 1/2 1-1/8 1-3/16 1/2 4 51317
1/2 2-13/16 3/8 1/2 1-1/8 1-3/16 1/2 4-1/4 51314
1/2 2-13/16 3/8 1/2 1-1/8 1-3/16 1/2 5 51319
B1
1/2 2-1/2 9/32 3/8 1-1/8 1 1/2 4 51321
Grooving
Profiling
Architectural
Jointing
d d STAGGER TOOTH
PLUNGE CUTTING
Carbide Tipped
Two cutting edges spaced 180 degrees apart, each half the length of its flute.
Flooring
One extends from the tip to the middle of the flute, the other from the middle to
end. The configuration combines the cutting speed and chip clearance of a
single-flute bit with the finish of a double-flute bit. Excellent bit for cutting dense
L or abrasive man-made materials and panel goods.
L 2 Blade Stagger
Door
Making ØD B Ød L Tool No.
1/4 1 1/4 2-1/4 51300
B
3/8 1-3/8 3/8 3 51302
3/8 1-1/2 1/2 3-1/8 51304
Solid Surface 1/2 1-1/2 1/2 3-1/8 51306
D 1/2 2 1/2 4-1/4 51308
1/2 2-1/8 1/2 4-1/4 51309
2 Blade
B 1/2 2-1/4 1/2 4-1/2 51310
Stagger
1/2 2-1/2 1/2 4-1/2 51311
1/2 2-5/8 1/2 4-3/4 51313
1/2 2-5/8 1/2 5 51327
1/2 2-5/8 1/2 5-1/2 51323
Router Bits
5/8 2 1/2 4 51315
Extra Long 3 Blade Stagger
D ØD B Ød L Tool No.
Extra Long 1/2 3-1/2 1/2 6-1/4 51325
3 Blade
Industrial Quality
Stagger
51325
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
24 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
d
STAGGER TOOTH
PANEL PILOT Straight
With Plunge Point Plunge
Carbide Tipped
Stagger tooth version of our standard two-flute panel pilot which gives greater
speed and stock removal than our single-flute with the strength of a two-flute bit.
Trimming
ØD B Ød L Tool No.
5/8 2-1/4 1/2 4-3/4 45520
L
B
Signmaking
Grooving
D Profiling
Architectural
HIGH SPEED STEEL d
PANEL PILOT (HSS) Jointing
Single Flute
Straight
The ultimate boring/pilot bit! These HSS panel pilot bits are long lasting and
perfect for mobile homes, modular homes and the RV industries. Flooring
Perfect for: wood panels, vinyl coated panels and aluminum layered material.
L
B
ØD B Ød L Tool No.
1/4 5/8 1/4 2-3/4 HSS11004
3/8 3/4 3/8 3-1/8 HSS11002
Door
1/2 1 1/2 3-1/2 HSS11006 Making
Spiral D
Perfect for mobile homes and RV industries, the ‘Down-Cut’ design ejects the
chips away from the operator. d
Solid Surface
Perfect for: drywall, wallboard, vinyl coated panels, aluminum and plywood
sandwich panels.
ØD B Ød L Tool No.
1/4 5/8 1/4 2-3/4 HSS11003
3/8 3/4 3/8 3-1/8 HSS11001
1/2 1 1/2 3-1/2 HSS11005
L
Router Bits
Industrial Quality
B
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 25
Aluminum
Cutting
Trimming
Signmaking
Grooving
SOLID CARBIDE
Profiling
ALUMINUM CUTTING
SPIRAL ‘O’ FLUTE
Up-Cut & Down-Cut • Single Flute
This bit is perfect for cutting aluminum, brass, copper and other non-ferrous
Architectural
metals. Bits are made according to strict tolerances from an exclusive carbide
grade and polished to a mirror finish using Amana’s unique process. Designed to
eject chips either up or down. Ideal for industrial applications and CNC machines.
Jointing Our spiral ‘O’ flute router bits are manufactured using innovative techniques and
materials that yield superior results with each cut and help make aluminum
projects less labor-intensive. We strongly recommend that a lubricant or
coolant be used which will prolong the life of the tool and to reduce tool
Flooring breakage.
Up-Cut Down-Cut Great For Cutting:
d d
• Aluminum
• Brass
• Copper
Door • Non-Ferrous Metals
Making
L
‘Up-Cut’ ‘Down-Cut’
B ØD B Ød L Tool No. Tool No.
Solid Surface 1/8 5/16 1/8 1-1/2 51406 51506
D D 3/16 1/2 1/4 2 51408 51508
1/4 5/8 1/4 2 51402 51502
Please note: for aluminum cutting, please lubricate.
The recommended feed rate for aluminum is 3 meters/min or 120 inch/min at
18,000 RPM.
Feed Rate Chart
r
! Warning: Maximum RPM 35,000
Router Bits
ØD=1/4"
Feed (inch/min)
ØD=3/16"
ØD=1/8"
Industrial Quality
Cutting depth (inch)
For Plastic Cutting Spiral ‘O’ Flute Router Bits, please see page 18.
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
26 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
d d
L
Designed and tested for trimming all decorative metal laminates manufactured by
L
Formica®, Advanced Technology Inc. (ATI™), DecoMetal® and many others. Engineered B
from an Amana Tool® exclusive carbide grade designed specifically for cutting both
metal laminates and wood-based substrate materials. Each bit is fitted with a steel
bearing guide that enables users to trim laminate materials flush to the substrate, D
allowing you to perform any metal trim job to perfection! B
51430
ØD B Ød L Tool No.
1/2 5/8 1/4 2-3/8 * ! 28 D
1/2 5/8 1/2 3-1/2 * ! 14
51432
#51430 Replacement bearing #47723 (2), replacement screw #67134.
#51432 Replacement bearing #47706, replacement screw #67011,
replacement washer #67098.
* Except material: Formica® #2178
! Maximum RPM
! 14 =14,000;
! 28 =28,000
Photos by DecoMetal®
Up-Cut Down-Cut
d d
Router Bits
Industrial Quality
This flush trim router bit was designed to eject chips UP or DOWN for clean
cuts in aluminum. Perfect for routing aluminum using a template. Features a
special carbide grade to perform high-quality cuts in aluminum.
L L
‘Up-Cut’ ‘Down-Cut’
ØD B Ød L Tool No. Tool No.
1/4 1-1/4 1/4 3-5/16
1/4 1/2 1/4 2-1/2 B B
Replacement bearing #47723 (2)
D D
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com
Mortising is one of the most common woodworking operations. Mortise-and-tenon joints, hinges and locks, grooves and dadoes, all
require the precise removal of material. Whether you need a deep mortise for a strong, interlocking joint on a chair or a shallow
mortise for hardware installation, Amana has a bit for the task. Some bits even have an upper guide bearing for use with a template.
All of our mortising bits have Amana’s renowned quality; your assurance of efficient, precise cuts and long tool life.
d
Cutting mortises for hinges and locks can be challenging; the mortise depth
must be accurate for smooth operation and the edges must be sharp for a clean,
L professional installation. These mortise bits make hardware installation a snap.
The large gullet between the two flutes clears chips away quickly and the cutter
geometry creates a crisp outline for a perfect fit.
B
ØD B Ød L Tool No.
D 1/2 3/4 1/4 2
5/8 3/4 1/4 2
3/4 3/4 1/4 2
1-1/4 3/4 1/2 2-1/8
A proper mortising bit,
as shown, should have a
large gullet between the
two flutes, as indicated
with an arrow. This
allows greater chip
clearance and removal.
Router Bits
Industrial Quality
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188.
HINGE AND LOCk FACE
MORTISING CUTTERS B Straight
Carbide Tipped • 2 Flute Plunge
Screw Type Cutters only (1/4" - 28 & 5/16" - 24 Thread) D
Mortise doors to fit hinges, locks, lock face plates and for general stock removal. Fits Porter-Cable® & other
All cutters fit threaded arbors (see threaded arbor table below). standard model mortising jigs. Trimming
Also used in door machines.
ØD B Thread Tool No.
1/2 7/8 1/4" - 28 55251 **
1/2 0.885 1/4" - 28 55253
5/8 9/16 1/4" - 28 55259 Signmaking
3/4 1/2 1/4" - 28 55250
3/4 + 0.015 9/16 1/4" - 28 55248
13/16 9/16 1/4" - 28 55249
7/8 1/2 1/4" - 28 55252 Grooving
15/16 9/16 1/4" - 28 55149
1 1/2 1/4" - 28 55254
1-1/8 9/16 1/4" - 28 55256
1-1/4 9/16 1/4" - 28 55257 Profiling
1-1/4 5/8 1/4" - 28 55258
1-1/4 5/8 5/16" - 24 55255 *
d
Arbors: 1/4" shank use #47611, 1/2" shank use #47614.
* Arbor 1/4" shank use #47616.
** Down-shear. Architectural
A
L
THREADED ARBOR
For Screw Type Mortising Cutters (above table) B
Jointing
For Use With Cutter(s): ØD Ød A B L Tool No. D
#55250 through #55258 1/4-28NF 1/4 1-7/16 1/4 1-13/16 47611 *
#55251 1/4-28NF 1/4 1-1/4 15/32 1-13/16 47615 *
Flooring
#55255 5/16-24NF 1/4 1-7/16 1/4 1-13/16 47616 *
#55250 through #55258 1/4-28NF 1/2 1-1/2 1/4 1-1/2 47614 *
* Due to application, these arbors are not furnished with hex nut or washers.
d
Door
Making
UP-SHEAR BIT
SLOT MORTISER
Carbide Tipped • 2 Flute For Slot Mortiser Only
Solid Surface
These bits are designed to do deep slot and holes for tenon, especially
in doors, chairs, tables etc. Special carbide with a 1" long up-shear and
chipbreaker for fast cuts and chip clearance. For use in lock mortising
machines and door machines.
ØD B B1 Ød L Tool No.
1/2 1 2-3/4 1/2 6 45540 p L
5/8 1 4-3/4 1/2 6-5/8 45542 p
Router Bits
Industrial Quality
3/4 1 4-3/4 1/2 6-5/8 45544 p
p Warning: DO NOT USE THESE BITS ON A DRILL PRESS MACHINE
B1
UNDER ANY CIRCUMSTANCES!
Cut Deep Mortises D
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 29
d
Intended for hinge mortising, this bit is an excellent choice for cutting laps and
L tenons as well. The sides and bottom of the cut are exceptionally smooth. The
down-shear design reduces chipping along the top edge of the cut, especially in
laminates, veneered plywood and MDF. The large gullet between the cutting
B edges provides excellent chip clearance.
D ØD B Ød L Tool No.
1/2 5/16 1/4 1-7/16
3/4 3/4 1/2 2-1/4
1-1/4 15/64 1/2 1-3/4
A proper mortising bit, 1-1/4 1/2 1/2 2
as shown, should have a
large gullet between the
two flutes, as indicated
with an arrow. This
allows greater chip
clearance and removal.
d
With Upper Ball Bearing
There is no faster method for producing multiple mortises than with a template.
L And the accuracy achieved with a template is unparallel. These mortise bits are
specially designed for use with templates, both linear and curved.
If you’ve ever used a bushing with template work then you’ll appreciate these
bearing-guided bits; there’s no need to calculate offset – ever. Instead, the
B mortise is sized exactly to the template. And, unlike a bushing on the router
sub-base, the guide bearing is always concentric to the cutting circle of the bit.
This ensures precise cuts each and every time.
D
Replacement
ØD B Ød L Bearing Collar Tool No.
1/2 3/4 1/4 2-3/8 47701 47724
A proper mortising bit, 5/8 3/4 1/4 2-3/8 47712 47724
as shown, should have a
3/4 3/4 1/4 2-7/16 47714 47724
large gullet between the
two flutes, as indicated 1-1/4 1/2 1/2 2-5/8 47756 47740
with an arrow. This
allows greater chip Template
clearance and removal.
Router Bits
Industrial Quality
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188.
MORTISING BIT d
For Bottom Cleaning
Straight
Carbide Tipped • 2 Flute Plunge
Up-Shear Design
L
This bit is intended for broad, very shallow cuts, where an exceptional finish is
desired. Use it to clean up previously cut dadoes and grooves, or for surfacing
cuts. The up-shear configuration improves chip removal, while the cutting-edge Trimming
orientation produces a smooth surface. B
ØD B Ød L Tool No. D
3/4 7/16 1/4 2-1/4 45560
3/4 7/16 1/2 2-1/2 45562 Signmaking
1 7/16 1/2 2-1/2 45564
1-1/2 5/8 1/2 2-3/4 45566
Grooving
Profiling
Architectural
Jointing
MORTISING BIT d
Flooring
For Bottom Cleaning
With Upper Ball Bearing
Carbide Tipped • 2 Flute
Up-Shear Design
L
Shank-mounted ball-bearing for pattern and template routing.
Door
Making
Replacement
ØD B Ød L Bearing Collar Tool No.
3/4 7/16 1/4 2-1/4 47714 47724 45561 B
3/4 7/16 1/2 2-1/2 47721 47739 45563
D Solid Surface
1 7/16 1/2 2-1/2 47754 47740 45565
1-1/2 5/8 1/2 2-3/4 47758 47740 45567
Template Router Bits
Industrial Quality
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 31
With Upper Ball Bearing
This bit is essentially a plunge-cutting straight with a shank-mounted ball-bearing pilot.
Versatile, useful for template/pattern routing of parts, joints, internal cuts and can be
used in handheld and table-mounted routers. The template is attached to the workpiece,
and the pilot bearing rides along its edge as the cutting edges rout the workpiece,
forming an exact duplicate of the template. With a handheld router, the pattern is on
top of the work; with a table-mounted router, the pattern is underneath the work.
d d
Replacement
ØD B Ød L Bearing Collar Tool No.
3/8 1/2 1/4 2 47751(2) 47764 †
1/2 3/8 1/4 2-1/4 47701 47724 *
1/2 1/2 1/4 2 47701 47724
1/2 3/4 1/4 2-1/4 47701 47724
1/2 1 1/4 2-1/2 47701 47724
L L 1/2 1-1/4 1/4 2-3/4 47701 47724
5/8 1/2 1/4 2-1/4 47712 47724
5/8 3/4 1/4 2-1/2 47712 47724
5/8 1 1/4 2-3/4 47712 47724
B 3/4 3/4 1/4 2-3/8 47714 47724
B
3/4 1 1/4 2-1/2 47714 47724
D 7/8 1 3/8 2-5/8 47741 47730
D
**Down-Shear Angle 1 1 3/8 2-7/8 47722 47730
45360, 45362 & 45364
Template 3/4 1 1/2 3 47721 47739
Router Bits
3/4 1-1/4 1/2 3-1/4 47721 47739 **
3/4 1-1/2 1/2 3-1/2 47721 47739 **
3/4 1-3/4 1/2 3-3/4 47721 47739
3/4 2 1/2 4 47721 47739 **
1 1-3/4 1/2 3-3/4 47754 47739
! 20
1-1/8 1 1/2 3 47738 47740
Industrial Quality
1-1/8 1-1/2 1/2 3-1/2 47738 47740
! 20
1-1/8 2 1/2 4 47738 47740
* For use on hardwood & flooring medallions. † Double Bearing.
See pages 33 & 128-129
for additional flooring bits. ** Down-Shear Angle – The shear angle cuts faster, cleaner and lasts longer than
straight angle because of the chip removal speed. We recommend using shear
angle in most instances especially where large diameters are used.
! Maximum RPM
! 20 =20,000
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188.
d
Bits are designed with a 1/4" cutting edge for dado clean-out.
Also used in hardwood and flooring medallions. L
Replacement
ØD B Ød L Bearing Collar Tool No. B
3/8 1/4 1/4 1-3/4 47751(2) 47764 † D
1/2 1/8 1/4 1-3/4 47701 47724 45460-S
1/2 1/4 1/4 1-5/8 47701 47724 1/4" Cutting Length
9/16 3/8 1/4 1-27/32 47753 47724 * Dado Clean-Out
5/8 1/4 1/4 1-3/4 47712 47724 Template
3/4 1/4 1/4 1-3/4 47714 47724
† Double bearing.
* Tambour groove/slot bit.
d
With Oversized Upper Ball Bearing Template
A
For template use with specified jigs. L
Repl.
Jigs ØD B Ød L A Bearing Tool No.
Porter-Cable® Morten,™ 5/16 3/4 1/4 2-3/4 3/32 47701
B
Morten & Tenon, Omnijig®
Hinge-Mate™ II 1/2 1/4 1/4 1-7/8 1/8 47714
Template D
Replacement for 1/2 3/8 1/4 2-1/2 1/16 47712
“Porter-Cable®” bit #43671 one piece. For Mortising of doors to accept hinge butts
with Porter-Cable® Kit model #59370 for 3," 3-1/2" and 4" hinges
Replacement collar #47724.
d
Template
With Upper Ball Bearing
RCK-30
L
Insert carbide is the economical way to go. Each knife has two edges; saves
down time. We have three different grades of carbide for various applications,
such as: hard/softwood, MDF, solid surface, chipboard and plywood.
B
ØD B Ød L Replacement Knives Tool No.
3/4 30mm 1/2 3-1/4 RCK-30
3/4 50mm 1/2 3-15/16 RCK-151 ** D RCK-151
** This tool is meant for difficult work. The knives are held with 3 screws. d
Replacement bearing #47721.
Router Bits
Industrial Quality
Replacement collar #47739.
Replacement knife screws #67115.
Template
A L
‘A’ Bearing No.
1/8 A
1/4 B
Above bearings must be purchased separately.
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com
Flush Trim
With Ball Bearing Guide
Straight
Plunge Carbide Tipped
Use any of the flush trimming bits below for laminate work or for template and
pattern work. For template application, the bearing follows the template, while
the cutting edges trim the workpiece. With the router handheld, the template is
Trimming on the bottom of the work. With a table-mounted router, the template is on top.
A two-flute bit is a good general-purpose choice, providing fast cuts and good
finishes. Excellent for template work.
2 Flute
Signmaking ØD B Ød L Tool No.
1/4 1/2 1/4 2-1/4 47090 *
1/4 1 1/4 2-1/2 47092 *
3/8 1/2 1/4 2-1/8 47102
Grooving d d d 3/8 1 1/4 2-5/8 47100
3/8 1-1/4 1/4 2-3/8 47093
3/8 1 1/2 3-1/8 47101
3/8 1 3/8 2-7/8 47103 †
Profiling 1/2 8mm(5/16) 1/4 2-1/4 RC-2000
1/2 7/16 1/4 2-19/64 DRB-400
L 1/2 1 1/4 2-5/8 47104
L 1/2 13/16 1/4 2-5/16 RC-47104
L
B 1/2 1/2 1/4 2-1/4 47106
Architectural
1/2 1 1/2 3-1/4 47108
B B 1/2 1/2 1/2 2-3/4 47110
1/2 1 3/8 2-7/8 47112
D 1/2 1-1/4 1/2 2-3/4 47117
Jointing RC-47104 3/4 1 1/2 3-1/4 47140
3/4 1-1/4 1/2 3-1/2 47141
D D
2 Flute 3 Flute * 1/4" diameter for closer inside corner cutting only; bearings not guaranteed due to size.
Flooring Replacement Bearings: *1/4" dia. use #47723, 3/8" dia. use #47702, 1/2" dia. use
RCK-262 #47706, 3/4" dia. use #47714. Undersized bearing (.492" dia.), use #47715 - for
use after re-sharpening (1/2" dia. only).
d d † Single Flute, for the RV industry.
Replacement Knife #RCK-8 (2 required).
Door Diamond Tipped.
Making Replacement Knife #RCK-262 (2 required).
3 Flute
For an extremely smooth finish, choose the three-flute configuration. It is
Solid Surface especially good to use on laminates that tend to chip easily.
L
ØD B Ød L Tool No.
B 1/2 1 1/4 2-5/8 47114
L 1/2 1/2 1/4 2 47116
1/2 1 1/2 3-1/4 47118
1/2 1 1/2 3-5/8 47118-2 ••
B 1/2 1/2 1/2 2-5/8 47120
Standard replacement bearing (.500" dia.), use #47706.
Router Bits
D Undersized bearing (.492" dia.), use #47715 - for use after re-sharpening.
•• Denotes double ball bearing for added stability.
4 Flute
4 Flute
For a super-smooth cut finish, use a four-flute bit. Feed rate is reduced, and
chipping is virtually eliminated.
Industrial Quality
D
ØD B Ød L Tool No.
57187
3/4 1 1/2 3 57184
3/4 1-1/2 1/2 4 57185
3/4 2 1/2 4-1/2 57186
3/4 2 1/2 4-3/4 57187 **
Standard replacement bearing (steel) use #47714.
Optional Delrin® replacement bearing (steel) use #47709, for solid surface application.
** Replacement Bearings: #47714 (bottom), #47721 (2 top). Retaining Collar #47740.
3D renderings & tool illustrations not shown at actual size. Visit our website for 1:1 profiles.
34 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
eCOnOmy inserT CArBiDe d
Flush Trim Straight
2 Flute With Ball Bearing Guide Plunge
Get the practicality and productivity of an insert bit for the cost of a standard
brazed-tip bit. The small two-sided carbide insert knives usually can be changed L
without altering the bit setup in the router. Because the knives aren’t heated for
brazing, it can be made of a harder grade of carbide and it will hold its edge B Trimming
longer. Ideal for both standard routers and laminate trimmers.
RCK-8
Repl. D
ØD B Ød L Knives Tool No.
1/2 8mm(5/16) 1/4 2-1/4 RCK-8 RC-2000 Signmaking
Replacement bearing #47706. Replacement knife hex key #5011.
Replacement knife screws #67016. Replacement bearing screw #67018.
Allen key for bearing #5007.
Grooving
Profiling
DiAmOnD TiPPeD (PCD) d
Architectural
Flush Trim
FOr mDF/lAminATe
2 Flute With Ball Bearing Guide Jointing
L
The ultimate flush trim bit. The diamond-tipped cutting edges last at least
40 times longer than carbide-tipped flush trims, saving you time and money.
B
ØD B Ød L Tool No. Flooring
1/2 7/16 1/4 2-19/64 DRB-400
D
Door
Making
inserT CArBiDe Flush Trim d d
Solid Surface
2 Flute With Ball Bearing Guide
In a production environment, insert tooling reduces downtime to a minimum.
Each throw-away insert knife in this flush trimming bit has multiple edges. Rotate
the knife to expose a fresh cutting edge. Tips can be replaced at any time, L
even mid-job, without changing the router setup.
B
Repl.
Router Bits
Industrial Quality
ØD B Ød L Knives Tool No.
L
3/4 12mm 1/4 2-1/8 AMA-12 RC-1000 D
3/4 30mm 1/2 3-1/4 ICK-30 RC-1004 RC-1000
3/4 50mm 1/2 4-5/16 RCK-151 RC-1006 *
B
* This tool is meant for difficult work. The knives are held with 3 screws.
NOTE: #RC-1000 & #RC-1006 have four cutting edges per knife.
#RC-1004 has two cutting edges per knife.
Torx® key included – #5005.
Replacement bearing #47711.
Replacement knife screws #67115. D
Replacement bearing screws #67176. AMA-12 ICK-30 RCK-151 3 Screws
RC-1006
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 35
d ™
With Ball Bearing Guide
Eliminate the time-consuming hand-filing that normally follows each trimming
L
cut on a laminate job. Our patented No-File™ bit “breaks” the sharp edge as it
trims the laminate flush. When used properly, the resulting edge is smooth and
B
has a slight radius.
R
D ØD B R Ød L Tool No.
1/2 3/8 .059 (1.5mm) 1/4 1-7/8
1/2 3/8 .059 (1.5mm) 1/2 2-1/8
1/2 3/8 .015 (0.4mm) 1/4 1-7/8
#47154 is for laminates .025"–.038" thick (.4mm radius),
#’s 47150-47152 are for laminates .042"–.052" thick (1.5mm radius).
Replacement bearing #47704 (3/8" dia.).
d d
With Ball Bearing Guide
Use this bit for template or pattern work where the workpiece is unusually thick.
The two-flute configuration cuts fast and produces a smooth finish.
For a superior finish, use the three-flute version. Twin bearings on selected tools
provide better contact with reference edge and more stability in the cut.
L
L ØD B Ød L Tool No.
1/2 1-1/2 1/2 3-7/8
B 1/2 2 1/2 4-1/4
B 1/2 1-1/2 1/2 4-1/16 ••
1/2 2 1/2 4-3/8 ••
1/2 1-1/2 1/2 3-7/8
D 1/2 2 1/2 4-5/8
2 Flute
D 1/2 1-1/2 1/2 4-1/16 ••
Double •• Denotes double ball bearing for added stability.
Bearing
Standard replacement bearing (.500" dia.), use #47706.
Undersized bearing (.492" dia.), use #47715 – for use after re-sharpening.
d
™
With Ball Bearing Guide
The Dynabit™ line features a modest down-shear for an excellent finish. The
helix bits have a spiral-like twist to the cutting edges, making them especially
good on difficult materials such as melamine. An adhesive-trapping gap between
L cutting edges and pilot bearing is featured on tools #47111 & #47113.
Router Bits
B Repl.
ØD B Ød L Type Bearing Tool No.
3/8 1/2 1/4 2-3/8 Down-shear 47702
Down-Shear 1/2 1 1/4 2-5/8 Down-shear 47706
Down-Shear
1/2 1 1/2 3 Down-shear 47706
D 1/2 1 1/4 2-7/8 Down-shear 47706
Industrial Quality
47105 Residue 1/2 1 1/2 3-1/4 Down-shear 47706
“Trough” 1/2 2 1/2 4 Down-shear 47706
47111 5/8 5/8 1/4 2 Flush Helix 47712
3/4 5/8 1/4 2-1/4 Flush Helix 47714
3/4 3/8 1/4 2 15° Bevel 47714
Down-shear bits are not intended for router table use.
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188.
suPerTrim™ 3° uP-sheAr d
With Ball Bearing Guide
Straight
Carbide Tipped • 2 Flute Plunge
For exceptional cutting speed, coupled with a super-fine finish, use these
large-diameter flush trim bits on a standard router. Available in either up-shear
or down-shear. Especially suitable for solid surface material when used with
optional #47709 Delrin® bearing. Furnished with steel bearing #47714. Trimming
L
ØD a° B Ød L Type Tool No.
3/4 3° 1-1/2 1/2 3-7/8 Up-shear 47130
3/4 3° 2 1/2 4-1/4 Up-shear 47134 B
aº
3/4 3° 1 1/2 3 Down-shear 47135 Signmaking
3/4 3° 1-1/2 1/2 3-7/8 Down-shear 47136
3/4 3° 2 1/2 4-1/4 Down-shear 47138
Note: Down-shear bits are not intended for router table use.
Steel replacement bearing #47714. Optional Delrin® bearing #47709. Grooving
D
Up-Shear Angle
Profiling
Architectural
Jointing
DOWn-sheAr d
mulTi Trimmer Flooring
Carbide Tipped • 2 Flute
This adaptable double bearing guided cutter has down-shear design, which
ensures a clean cut even in difficult materials. The two-bearing design allows
the cutter to be used with the template mounted on either side of the work and,
consequently, it is possible to cut from either direction using only one template
and without moving the template to the other side of the work piece. Door
This is especially useful when cutting curves which run both with and against L Making
the grain.
B
Replacement Bearing
ØD B Ød L Upper Lower Tool No. Solid Surface
1/2 5/8 1/4 2-3/32 47701 47706 47094
3/4 1-1/4 1/2 3-3/4 47721(2) 47714 47096
3/4 2 1/2 4-5/16 47721(2) 47714 47097
D
Down-Shear Angle
Router Bits
Industrial Quality
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 37
Straight
Plunge
Trimming
Signmaking
Grooving
Cut straight and flush with each and every cut, without ever re-sharpening your bits. E-Z Change™ router bits are an economical
alternative to standard router bits. They feature replaceable head carbide tipped cutters, saving you money by replacing only the cutters
Profiling when the knives become dull, instead of the entire tool. You won’t need a second bit while yours is in the sharpening shop; instead, just
change the cutters. You won’t even lose your set-up because the E-Z Change™ cutters can be replaced with the bit in the router collet. The
interlocking hex design guarantees that the cutting surfaces will not slip during use.
Architectural
d
Flush Trim
rePlACeABle heAD
Jointing Replaces Ocemco #TA-150
Carbide Tipped • 2 Flute
L
ØD B d L Tool No.
B 1/2 1/2 1/4 1-31/32 47170
Flooring
3-Pack of Carbide Tipped Cutters for #47170 (Replaces Ocemco #TA-156) 55170
Replacement Parts
D 1/4" Shank (screw # 67090 & washer #67124 included): #47624.
Bearing (3/16" Ød x 1/2" ØD): #47706.
Door
DADO CleAn OuT
Making d
rePlACeABle heAD
Carbide Tipped • 2 Flute
Solid Surface L
ØD B d L Tool No.
1/2 1/4 1/4 1-11/16 47173
B
3-Pack of Carbide Tipped Cutters for #47173 55173
D Replacement Parts
1/4" Shank: #47628.
Bearing (3/16" Ød x 1/2" ØD): #47706.
d
Router Bits
TemPlATe
rePlACeABle heAD
Replaces Ocemco #TA-170
L Carbide Tipped • 2 Flute
Industrial Quality
ØD B d L Tool No.
1/2 1/2 1/4 1-15/16 47174
B
3-Pack of Carbide Tipped Cutters for #47174 (Replaces Ocemco #TA-176) 55174
D Replacement Parts
1/4" Shank: #47626.
Bearing (3/16" Ød x 1/2" ØD): #47706.
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
38 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
Bevel/TAPereD d
rePlACeABle heAD Straight
Replaces Ocemco #TA-151* Plunge
Carbide Tipped • 2 Flute
L
ØD ØD1 a° B d L Tool No.
5/8 1/2 10° 1/2 1/4 2 47178 * B
Trimming
3-Pack of Carbide Tipped Cutters for #47178 (Replaces Ocemco #TA-157) 55178
aº
5/8 1/2 15° 1/4 1/4 1-3/4 47179
3-Pack of Carbide Tipped Cutters for #47179 55179 D1
D
Replacement Parts
1/4" Shank (screw #67096 & washer #67124 included): #47624. Signmaking
Bearing (3/16" Ød x 1/2" ØD): #47706.
Grooving
ulTrATrim™ Up-Cut Down-Cut
sOliD CArBiDe sPirAl Trim
d d
Profiling
With Double Ball Bearing Guides
2 Flute With Double Ball Bearing Guides
For the ultimate, chip-free finish in laminate, melamine, solid surface, fragile
veneers and for template work of all kinds. The twin ball-bearing pilot enhances Architectural
the stability of the tool. Available in ‘Up-Cut’ and ‘Down-Cut’ spirals.
‘Up-Cut’ ‘Down-Cut’
L
ØD B Ød L Tool No. Tool No. Jointing
1/2 1-1/4 1/2 3-3/4 46300 46400
B
1/2 2 1/2 4-3/4 46304 46404
Standard Replacement Bearing: (.500" dia.), use #47706.
Undersized bearing (.492" dia.), use #47715 – for use after re-sharpening. Flooring
Replacement nut: use #67086.
D D
Door
Making
ulTrATrim™ d d
sOliD CArBiDe sPirAl Trim Solid Surface
2 Flute • Up-Cut Or Down-Cut Spiral
Spiral flush trim bit, #46196 is used for acrylic and wood (such as MDF) up
to a 1/4" thick, for getting into tight corners with a small radius and great for L
cleaning out your edges. #46197 is mainly used for acrylic and wood (such as
MDF) up to a 1/2" thickness. B
L
‘Up-Cut’ ‘Down-Cut’
Router Bits
ØD B Ød L Tool No. Tool No.
Industrial Quality
D B
1/8 3/8 1/4 2 46196 * ; 46296 * ;
Brass
1/4 1 1/4 3 46197 u 46297 u Pilot
* NOTE: Due to extremely small cutting diameter this bit is not guaranteed. Guide
; Brass pilot guide
u Double ball bearing pressed
D
Replacement Bearings for #46197 and #46297: Two #47723.
Philips Retaining Screws for #46197 and #46297: #67134.
46297 46196
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 39
d
sOliD CArBiDe
Straight
COmPressiOn sPirAl
Plunge 2 Flute With Double Ball Bearing Guides
Spiral bits produce razor-sharp cutting edges in flush trimming. The twin
ball-bearing pilot enhances the stability of the tool. This bit offers an
‘Up-Cut’ and ‘Down-Cut’ combination.
Trimming
ØD B Ød L Tool No.
1/2 1-1/4 1/2 3-3/4 46192
L
Replacement bearing #47706.
Replacement nut: use #67086.
Signmaking
Grooving
D
Profiling
d
‘OverhAng’ Trim
With Ball Bearing Guide
Architectural
Carbide Tipped • 2 Flute
Stage flush trimming cuts, whether in laminate work or template work, with this
bit. Trimming the material in two passes reduces chipping in laminates and
Jointing tearout in solid wood. A preliminary cut with the overhang bit leaves a small
overhang in laminate work or, template work, leaves an edge slightly proud of
L
the template. Complete the operation with a final pass using a standard trim bit.
ØD B A Ød L Tool No.
Flooring A B 3/8 1/2 1/8 1/4 2 47190
1/2 1/2 1/16 1/4 2 47192
A 1/2 1/2 1/16 1/2 2-5/8 47194
Replacement bearing: #47718 (5/8" diameter).
D
Door
Making
Solid Surface
d
Flush Trim ‘v’ grOOve
With Ball Bearing Guide
Carbide Tipped • 2 Flute
Trim the edges of face frames flush with cabinet sides with this bit. At the
same time, cut a decorative ‘V’ groove to conceal the seam between the frame
Router Bits
and the case.
L
ØD ØD1 B Ød L Tool No.
5/8 1/2 1 1/4 2-5/8 47160
5/8 1/2 1 1/2 3-1/4 47162
B
Industrial Quality
Replacement bearing: #47706.
D
D1
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
40 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
Bevel Trim d
With Ball Bearing Guide
Straight
Carbide Tipped • 2 Flute Plunge
This is a steel-bodied, carbide-tipped bit for bevel trimming laminate with a
L
standard router. The solid construction reduces vibration for the smoothest cut
possible with a two-flute bit. aº B
Trimming
ØD a° B Ød L Tool No.
5/8 15° 9/32 1/4 1-7/8 47200 D
1/2 22° 3/8 1/4 1-3/4 47201
23/32 25° 9/32 1/4 1-7/8 47202
3/4 25° 7/16 1/4 1-7/8 47206 Signmaking
1-1/16 45° 9/32 1/4 2 47204
NOTE: Tool #47206 has a 3/8" diameter bearing for closer inside corner cutting.
Replacement Bearing: Tool #47206 use #47704 bearing. All other tools use #47706
Grooving
bearing (1/2" dia.) or new #47715 (.492" dia.) for use after resharpening.
Bevel Trim d Profiling
With Ball Bearing Guide
Carbide Tipped • 3 Flute
The solid construction of this carbide-tipped bit reduces vibration, and its three-flute L
configuration produces a very smooth cut. Intended for use in a standard router. Architectural
aº B
ØD a° B Ød L Tool No.
3/4 7° 7/16 1/4 2 47302
51/64 15° 7/16 1/4 2 47301 D Jointing
15/16 22° 7/16 1/4 1-7/8 47300
1-3/32 30° 7/16 1/4 2 47304
Replacement Bearing: #47716.
Flooring
inserT CArBiDe Bevel Trim™ d
2 Flute With Ball Bearing Guide AMA-12
Repl.
ØD a° B Ød L Knives Tool No. Door
aa°° Making
13/16 15° 7/16 1/4 2-1/4 AMA-12 RC-1008
L
31/32 25° 7/16 1/4 2-1/4 AMA-12 RC-1010
1-1/16 45° 7/16 1/4 2-1/4 AMA-12 RC-1014 B
Note: All bevel trim bits have four cutting edges per knife. Solid Surface
Torx® key included.
D
Replacement bearing for RC-1014 use #47701. All others use #47712 bearing.
Replacement knife screws #67115.
sPeCiAl Bevel Trim d
Router Bits
With Ball Bearing Guide
Industrial Quality
Carbide Tipped • 2 Flute
A very shallow bevel angle and the gap between the cutting edges and the ball-
bearing pilot are the key features of this carbide-tipped bit. The gap collects L
adhesive residue that usually fouls the pilot and thus degrade the cut. B
ØD a° B Ød L Tool No. aº
5/8 8° 15/32 1/4 2-1/4 47210
NOTE: Tool #47210 is a special 8° bevel tool with a gap (.287") to reduce glue build-up. D
Standard replacement bearing (.500" dia.) #47706 or new #47715 (.492" dia.) for use Gap reduces
after resharpening. adhesive
build-up around
bearing area.
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 41
d
45° lAminATe miTer JOinT
Straight
unDer-CuT AssemBly
Plunge Carbide Tipped
4 Wing With ‘Ultra-Glide™’ Ball Bearing Assembly
Eliminate that dark line at the edge of a counter or other laminate-covered
L
surface. With this bit assembly, the laminate cemented to the substrate can
Trimming aº be trimmed and mitered in one pass. Then a pre-mitered edging strip can
B
be applied. The resulting seam is clean and crisp. Not intended for use in
a laminate trimmer.
a. Laminated top is ‘under-cut’, as shown.
Signmaking D b. Apron laminate is pre-cut at 45.°
c. Adhere pre-cut laminate for a perfect fit. A fine file
may be used to remove the sharp edge after joining.
Grooving a b c ØD a° B Ød L Tool No.
1-3/8 45° 1/4 1/4 2-3/8 55312
1-3/8 45° 1/4 1/2 2-3/8 55314
Replacement Parts: 1/4" Shank Arbor: #47600. 1/2" Shank Arbor: #47604.
Profiling
45° Cutter Only: #55310.
‘Ultra-Glide™’ Bearing: #47727.
Nut: #67088.
Architectural d d
4 Wing Bevel Trim
CuTTer AssemBly
Includes: Cutter, Arbor And Ball Bearing Guide
Jointing
Carbide Tipped
L L An assembly offers the option of switching cutters – from flush trim to either of
aº two bevel trims – without removing the bit from the router or even changing the
B B
Flooring depth-of-cut setup. Four flutes yield a smooth, crisp cut finish. All parts can be
replaced individually.
ØD a° B Ød L Tool No.
D D 7/8 Flush 1/4 1/4 2-3/8 47400
Flush 15° 1 15° 1/4 1/4 2-3/8 47404
Door Replacement Parts: Arbors: 1/4" – #47600, 3/8" – #47602, 1/2" – #47604.
Making Cutters: Flush – #47500, 15° – #47502.
Bearing: #47708.
Nut: #67088.
Solid Surface
Flush Bevel
4 Wing CuTTers Only
Carbide Tipped
Router Bits
Flush
Cutters for the above assembly are available separately.
d1
B
15% ØD a° B Ød1 Usage Tool No.
7/8 Flush 1/4 5/16 T or B 47500
1 15° 1/4 5/16 T* 47502
Industrial Quality
D 25% aº
1 15° 1/4 5/16 B** 47502-L
1-1/16 25° 1/4 5/16 T* 47504
1-1/16 25° 1/4 5/16 B** 47504-L
* Denotes top cutter.
** Denotes bottom cutter.
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
42 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
d d
The ideal laminate trimming bit for high-volume production. Solid carbide and
integral pilot (no bearing to maintain) extend life of bit, slim configuration L L
reduces vibration. Suitable for routers and trimmers.
B B
ØD B Ød L Type of Cut Tool No.
1/4 1/4 1/4 1-1/2 Flush
D D
1/4 1/4 1/4 1-1/2 7°
1/4 1/4 1/4 1-7/16 Flush * Flush Bevel
1/4 3/8 1/4 1-1/2 Flush
* #51204 has a short/flat pilot for dado clean out/ dado cleaning.
51200 51202
Flush Bevel
51204 51206
d d
B B
The ideal laminate trimming bit for high-volume production. Solid carbide and L L
integral pilot (no bearing to maintain) extend life of bit, slim configuration
reduces vibration. Suitable for routers and trimmers.
Unique double ended panel pilot bits provide 2 cutting sides in one tool. When B B
the bit dulls, just flip it over!
D D
ØD B Ød L Type of Cut Tool No.
1/4 1/4 1/4 2 Flush Flush Bevel
1/4 1/4 1/4 2 7° Bevel
Flush Bevel
Router Bits
Industrial Quality
51201
51203
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com
d
sOliD CArBiDe
hOle AnD Flush CuT
Straight
Plunge Trimmer
L Single Flute
B This bit is used where laminate is applied over pre-cut openings in the substrate.
In a continuous operation, bore through the laminate and cut the laminate out of
Trimming the opening. The plunge point bores through the laminate to begin, and the
D
integral pilot rides along the opening’s inside edge to guide the trimming cut.
ØD B Ød L Tool No.
1/4 1/4 1/4 1-1/2 51712
Signmaking
Grooving
sOliD CArBiDe
d
Profiling COmBinATiOn Flush
L
AnD 7° Bevel Trimmer
Single Flute
A bit designed specifically for use in a laminate trimmer, that will both flush and
Architectural a° B bevel trim. A change in cut depth is all it takes to switch from one to the other.
Must be used with a separate ball-bearing or edge guide.
D
ØD a° B Ød L Tool No.
1/4 7° 3/8 1/4 1-1/2 51706
Jointing
Flooring
d
sOliD CArBiDe
riP AnD slOTTing
Door Single Flute
Making
L Use this bit for cutting sheets of laminate, paneling, and other thin material, as
well as plowing narrow slots, dadoes, and grooves.
B ØD B Ød L Tool No.
Solid Surface
D 1/4 5/16 1/4 1-1/2 51708
Router Bits
d
sOliD CArBiDe
‘v’ grOOving
Single Flute
L Rout fine-line ‘V’ grooves in laminate-covered and wooden surfaces with this
Industrial Quality
solid-carbide bit, designed specifically for use in a laminate trimmer.
B
ØD B Ød L Tool No.
1/4 3/8 1/4 1-1/2 51710
D
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
44 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
WeATherseAl sTrAighT d
Carbide Tipped • Single Flute
Straight
This bit is used to re-groove door and window frames to allow for insulating Plunge
inserts to block wind and drafts.
L
ØD B Ød L Tool No.
1/8 1/2 1/4 2-1/4 43813
Trimming
B D
Signmaking
D
Grooving
WeATherseAl PrOFile d
Profiling
Carbide Tipped • Single Flute
This bit is used to re-groove door and window frames to allow for insulating
inserts to block wind and drafts.
Architectural
ØD D1 B a° Ød L Tool No. L
1/8 1/16 3/8 38° 1/4 2-1/2 45729
Jointing
B
a° D
B
Flooring
1:1 D1
D1
D
Door
Making
COmBinATiOn d
Bevel AnD Flush Trim Solid Surface
Cut, trim, and bevel laminates with this one bit. Change depth-of-cut setting to
shift from flush to bevel-trimming. Must be used with an edge or bearing guide d
or fence. Designed specifically for use in laminate trimmers. L d
Carbide Tipped L
L
B
ØD a° B Flutes Ød L Tool No. B B
1/2 23° 1/2 2 1/4 1-3/4 51100
a˚ a˚ a˚
51400
Router Bits
Industrial Quality
11/32 22.5° 1/2 2 1/4 1-5/8 D D D
11/32 25° 1/2 1 1/4 15/16 51500 2 Flute 1 Flute *2 Flute
13/32 22° 9/32 2 1/4 15/16 51600 * 51100 51500 51600
* Bevel Trim Only.
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 45
RC-2250 & RC-2252
The CNC insert spoilboard industrial router bits with scorers features a unique 2+2 knife design that contains two cutting flutes and
two up-shear scorers, which provide a smoother finish at the bottom of the cut than traditional two-knife style router bits. Engineered
with an Amana-exclusive carbide grade for the highest quality of cut, maximum cutting efficiency, faster material removal process and
the longest tool life. These industrial router bits feature insert knives with four cutting edges that allow users to flip the knife over when
one side becomes dull.
d
With Scorer and 2+2 Insert Knife Design
Insert spoilboard, planing and rabbeting router bit complete with two cutting
flutes and two up-shear scorer will give excellent results in MDF, balsa core,
hardwood, softwood and all man-made materials. A great tool for fast removal
CNC of materials over a large surface area. The scorer leaves an improved finish
USE ONLY L
at the bottom of the cut. Utilizes 4-sided carbide inserts.
Repl. T.C.
B ØD B Ød L Knives Max RPM Tool No.
D 80mm(3-1/8) 12mm(15/32) 3/4 90(3-1/2) AMA-12, RCK-70 18,000
RC-2252 Optional MDF knives: HMA-12 & HCK-70.
Replacement screws: (2) #67155 & (2) #67115.
Torx® key included.
AMA-12 D
RCK-70
Router Bits
To produce MDF Shaker
cabinet doors use #RC-2250 or
#RC-2252 and square corners
with #45200 straight plunge
router bit.
Industrial Quality
Create Your Own
MDF SIMULATED SHAKER DOORS
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188.
d
With Scorer and 2+2 Insert Knife Design
Mini insert spoilboard surfacing & rabbeting with scorer, great L
for cutting tight corners. Features unique 2+2 insert knife design
that contains two cutting flutes and two up-shear scorers, which
provide a smoother finish at the bottom of the cut than traditional
two-knife style router bits. B
D
• 2+2 Mini design for tighter corners
• Utilizes 4-sided carbide inserts
• Exclusive carbide grade for highest quality of cut
• Maximum cutting efficiency
• Faster material removal process
• Longest tool life
Repl. T.C.
ØD B Ød L Knives Max RPM Tool No.
1-1/2 1/2 1/2 2-5/16 AMA-12, RCK-70 18,000
MINI
Optional MDF knives: HMA-12 & HCK-70.
Replacement screws: (2) #67155 & (2) #67115.
DESIGN
AMA-12 RCK-70
RC-2250
Torx® key included.
d
RC-2257
Used in resurfacing of particle board, MDF and balsa core material.
L
Utilizes 4-sided carbide inserts.
Repl.
ØD B Ød L Knives Tool No.
2-1/2 1/2 1/2 2-1/2 HMA-12 B
Router Bits
Industrial Quality
4 1/2 3/4 4 HMA-12 *
* CNC Use Only. D
Replacement screws: #67115.
Replacement wrench: #5005.
HMA-12 D
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com
AmAnA Tool® hAs A rouTer biT for every signmAking ApplicATion.
Our insert carbide V-groove bits are available in a wide range of sizes and angles from 40 to 160
degrees. The insert carbide V-groove bits are a cost-effective way to extend your woodworking
budget, the cutting surfaces are not subject to the heat of brazing, allowing for a harder, longer-
wearing grade of carbide to be used. Our In-Groove CNC Insert Carbide Engraving System offers
the latest advancements in CNC tooling. The precision tips are designed to shape and engrave a
wide variety of materials from solid wood and veneers to aluminum and plastics.
48 r
! Warning: Before use, read router bit safety guidelines on pages 186-188.
d d
Cut decorative ‘V’ grooves and lettering on signs with these ‘V’ Groove bits.
Use with an edge guide to chamfer and bevel edges. Can be used with handheld,
table-mounted and CNC routers.
L
L
ØD a° B B1 Ød L Tool No.
B
1/2 60° 5/8 7/16 1/4 1-3/4 † B1
3/8 90° 7/16 3/16 1/4 1-5/8
a° B1 B
3/8 90° 7/16 3/16 1/2 2 D
1/2 90° 1/2 1/4 1/4 1-5/8
1/2 90° 1/2 1/4 1/2 2-1/8 a°
5/8 90° 1/2 5/16 1/4 1-5/8 D
5/8 90° 1/2 5/16 1/2 2
3/4 90° 5/8 3/8 1/4 1-3/4
3/4 90° 5/8 3/8 1/2 2-1/8
7/8 90° 5/8 7/16 1/4 1-7/8
7/8 90° 5/8 7/16 1/2 2-1/4
1 90° 5/8 1/2 1/4 1-7/8
1 90° 5/8 1/2 1/2 2-1/4
1-1/4 90° 3/4 5/8 1/2 2-1/2
1-1/4 90° 15/16 5/8 1/4 2-13/64 a°
1-1/4 100° 53/64 17/32 1/4 2-3/32
1-1/4 110° 47/64 7/16 1/4 2
1-1/4 120° 21/32 23/64 1/4 1-59/64
1-1/4 130° 31/64 13/64 1/4 1-3/4 45705 60°
1-1/4 150° 7/16 11/64 1/4 1-11/16
1-1/2 90° 1 3/4 1/2 2-3/4 ! 10 45700 90°
2 90° 1-3/4 1 1/2 3-1/4 ! 12
! Maximum RPM
! 10 =10,000;
! 12 =12,000
45704 90°
† 2 flute 60° ‘V’ Groove bit designed for lettering, signmaking
and decorative work.
Use in a table-mounted router. 45710 90°
CNC 45714 90°
USE ONLY
ØD a° B B1 Ø
Ød L Tool No.
1-1/4 90° 3/4 5/8 1/2 2-1/2 45752 100°
1-1/2 90° 1 3/4 1/2 2-3/4
2 90° 1-3/4 1 1/2 3-1/4
45756 120°
! Maximum RPM 18,000
These tools have an open flute design (not anti-kickback) and are
intended for high feed-rate CNC machine use only.
90° ‘V’ Groove bits are for decorative purposes and are not intended
for ‘miter-folding’, etc. 45728 90°
45732 90°
Router Bits
Industrial Quality
45726-CNC 90°
45728-CNC 90°
45732-CNC 90°
1:1
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com
inserT cArbide ‘v’ groove, miTer fold,
Straight
signmAking & leTTering
Plunge 40° to 160° • Single Flute & 2 Flute
Innovative CNC tool design uses the highest grade carbide insert knives which allow you to get two uses out of each knife. Once insert
knife shows signs of wear you can rotate the insert for a brand new cutting edge. Designed for ‘V’ Grooving, signmaking, lettering, miter
folding, and chamfering wood to a perfect joint! Cost-effective solution to replacing entire tool. Secure locking screw system ensures
Trimming maximum safety and maintains cutting accuracy.
1/2" Shank RCK-56 RCK-56
Cutting Gen. Purpose MDF Torx
ØD a° a°1 B B1 Flutes Edges Ød L1 L Repl.T.C Knife Repl.T.C Knife Screw Tool No.
Signmaking 47/64 40° 20° 1 1- 1/16 1 1 1/2 1-1/2 2-9/16 RCK-57 RCK-367 67117 RC-1040 r! 28
13/16 45° 22.5° 1 1- 1/16 1 1 1/2 1-3/8 2-3/8 RCK-56 RCK-350 67117 RC-1045 r! 24
13/16 45° 22.5° 1 1- 1/16 1 1 1/2 2-1/2 3-21/32 RCK-56 RCK-350 67108 RC-1049 r! 16
27/32 46° 23° 63/64 1- 1/16 1 1 1/2 1-3/8 2-3/8 RCK-56 RCK-350 67117 RC-1047 r! 18
Grooving 1-1/32 60° 30° 29/32 1- 1/16 1 1 1/2 1-3/8 2-7/16 RCK-56 RCK-350 67117 RC-1108 r! 18
1-7/32 70° 35° 7/8 1- 1/16 1 1 1/2 1-1/2 2-9/16 RCK-56 RCK-350 67117 RC-1048 r! 18
1-1/4 72° 36° 7/8 1- 1/16 1 1 1/2 1-1/2 2-19/32 RCK-56 RCK-350 67117 RC-1072 r! 18*
1-1/2 90° 45° 3/4 1- 1/16 1 2 1/2 1- 25/32 3 RCK-134 RCK-351 67117 RC-1102 r! 22
Profiling 1-1/2 91° 45.5° 3/4 1- 1/16 1 2 1/2 1- 25/32 3 RCK-119 RCK-352 67115 RC-1100 r! 22
1-3/4 110° 55° 5/8 1- 1/16 1 2 1/2 2 3-3/16 RCK-119 RCK-352 67117 RC-1105 r! 22
2-1/32 120° 60° 9/16 1-5/32 2 1 1/2 2 3-1/16 RCK-136 RCK-353 67139 RC-1104 r! 18
2-1/8 130° 65° 1/2 1-5/32 2 1 1/2 2 3 RCK-137 RCK-354 67115 RC-1107 r! 16
2-1/4 150° 75° 19/64 1-5/32 2 1 1/2 2 2-15/16 RCK-137 RCK-354 67115 RC-1106 r! 14
Architectural 2-5/16 160° 80° 13/64 1-5/32 2 1 1/2 2 2-25/32 RCK-137 RCK-354 67115 RC-1109 r! 14
* This tool will make 5 sided box.
Jointing
r
! Warning: Maximum RPM r
! 14 =14,000; r
! 16 =16,000; r
! 18 =18,000; r
! 22 =22,000; r
! 24 =24,000; r
! 28 =28,000
RC-1104
120°
Flooring
L1
a°1 a° L
Door
Making
B
B1
RC-1045
Solid Surface 45° D
CNC Insert Carbide Knives
Designed to V-Groove
These Materials: 8 sides (22.5°) 22.5° 45° Fold
MDF Melamine RC-1045 RC-1045 RC-1045
Router Bits
RC-1109 160°
RC-1106 150°
Laminate Veneered FoamCore Aluminum
Plywood FoamCore
Industrial Quality
RC-1107 130°
RC-1104 120°
Plywood Solid Surface Xanita® LightBoard™ Carbon Fiber
X-board™ For Engraving RC-1105 110°
X-board Plus™ Only 1:1
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
50 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
Innovative CNC tool design uses the highest grade carbide insert knives which allow you to get two uses out of each knife. Once insert
knife shows signs of wear you can rotate the insert for a brand new cutting edge. Designed for ‘V’ Grooving, signmaking, lettering, miter
folding, and chamfering wood to a perfect joint! Cost-effective solution to replacing entire tool. Secure locking screw system
em ensures
maximum safety and maintains cutting accuracy.
CNC
RCK-58 RCK-58 USE ONLY
Cutting Gen. Purpose MDF Torx
ØD a° a°1 B B1 Flutes Edges Ød L1 L Repl.T.C Knife Repl.T.C Knife Screw Tool No.
1-1/2 45° 22.5° 1-3/4 1-15/16 1 1 3/4 2-3/16 4-1/4 RCK-58 RCK-349 67108
! 18
2-5/8 90° 45° 1-9/32 1-27/32 1 2 3/4 2-5/32 3-13/16 RCK-133 RCK-355 67110
! 18
3 90° 45° 1-1/2 27/64 1 2 3/4 2-23/64 4-23/64 RCK-138 RCK-359 67115
! 18
2-5/8 91° 45.5° 1-5/16 1-3/8 1 2 3/4 2-3/8 3-7/8 RCK-117 RCK-356 67110
! 18
3-27/32 130° 65° 13/16 1-31/32 2 1 3/4 2-3/8 3-7/8 RCK-112 RCK-357 67115
! 12
3-25/32 150° 75° 1/2 1-31/32 2 1 3/4 2-3/8 3-1/2 RCK-112 RCK-357 67115
! 12
! Maximum RPM
! 12 =12,000;
! 18 =18,000
These tools have an open flute design (not anti-kickback) and are intended for high feed-rate CNC machine use only.
• Long lasting insert knives provide superior smooth quality cuts
every time.
• Quick and precise replacement of dull knives.
• Insert accuracy extends tool life.
• Insert tooling allows for harder grades of carbide.
• Knives can be re-sharpened multiple times without affecting the
original profile.
• Cost-effective solution compared to replacing brazed router bits.
• Special carbide grades for special applications.
d
RC-1028
91°
L1
Router Bits
Industrial Quality
aaº1
º1
L
RC-1028: 3/4" Shank Great for
RC-1100: 1/2" Shank V-Grooves
91° and
B
a˚= 91˚ Trimming
B1
Edges
33 Max.
a°
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com
(V-Tips Inserts Only)
The 8-piece In-Groove collection contains industrial-quality insert carbide knives that can
quickly and easily be interchanged while the tool body remains mounted in the CNC machine,
minimizing downtime and helping maintain consistent cutting accuracy.
Router Bits
Description Ød L Tool No.
8-Piece In-Groove Set 1/4 2-1/2
8-Piece In-Groove Set 1/2 2-1/2
Industrial Quality
QTY Description
1 Corner Round/Bead Groove Insert Carbide Knife
1 Straight Insert Carbide Knife
3 30º V-Tip Insert Carbide Knives
1 60º V-Tip Insert Carbide Knife
AMS-209
1 1/16" Radius Core Box Insert Carbide Knife
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188.
Replacement In-Groove™ Insert Carbide Knives
ØD1 B Tool No.
0.005 16mm(5/8)
0.010 16mm(5/8)
0.020 16mm(5/8)
0.030 16mm(5/8)
30º
0.040 16mm(5/8)
0.060 16mm(5/8) B
0.090 16mm(5/8)
ØD1 B Tool No.
0.005 7.5mm(9/32)
0.010 7.5mm(9/32)
0.020 7.5mm(9/32)
0.030 7.5mm(9/32)
60º
0.040 7.5mm(9/32)
0.060 7.5mm(9/32)
B
0.090 7.5mm(9/32)
AS GOOD AS
ØD1
0.005
B
4mm(5/32)
Tool No.
0.010 4mm(5/32)
d d 0.020 4mm(5/32)
90º
Industrial quality insert carbide knives produce 0.040 4mm(5/32)
crisp, clean cuts and last at least twice as long
as comparable solid carbide bits. B
This engraving system was engineered to
quickly interchange inserts while tool body
can remain mounted in CNC machine. This L
minimizes down-time and helps to maintain ØD1 B Tool No.
consistent cutting accuracy. 1/8 5mm(3/16)
CNC Tool bodies are expertly 3/16 6mm(15/64)
balanced for virtually no vibration 1/4 7mm(9/32)
to provide superior cutting results. 5/16 8mm(5/16)
Ideal for cutting laminated
materials, veneers, MDF, plastics, B
wood and solid surface. V-Tip
inserts can also cut aluminum. D1 D1
RC-1075* RC-1076*
Radius B Tool No.
Description Ød L Tool No. 1/16 5mm(3/16)
Tool Body 1/4 2-1/2 * 3/32 6mm(15/64)
Tool Body 1/2 2-1/2 * 1/8 7mm(9/32)
Replacement hex key #5004. Replacement screw #67127. 5/32 8mm(5/16)
Router Bits
Industrial Quality
* Insert knives sold separately.
B
www.amanatool.com/ingroove
Radius B Tool No.
1/16 8mm(5/16)
3/32 8mm(5/16)
1/8 8mm(5/16)
10 pc. Minimum
B
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com
TM
MAX
MIN
CNC INSERT CUT & QUAD CHAMFER SYSTEM
The Most Innovative time saving system
for cutting and chamfering in plastics.
Thirteen unique insert knife profiles produce smooth, chip-free cuts and last at
least twice as long as comparable solid carbide bits.
These industrial quality knives allow the user to both cut & chamfer the top
and bottoms of Plexiglas® or styrene sheets in one action. The knives fit the
In-Groove™ tool bodies – both the 1/4" shank #RC-1075 and the 1/2" shank
#RC-1076, which are expertly balanced to provide superior cutting results.
For more information visit
d
For Signmaking
L
For extra-fine carving and lettering details. These tools are used for wood,
plastic, aluminum and solid surface materials.
t = tip width Ød L Tool No.
0.005 1/4 2
t
0.010 1/4 2
0.020 1/4 2
0.030 1/4 2
0.040 1/4 2
1:1 45777 0.060 1/4 2
0.090 1/4 2
0.005 to 0.090 30° Set (7 Pcs.) 2
! Maximum RPM 28,000
Originally developed in Europe specifically for professional signmakers, this
L solid-carbide bit features an extra-fine 60° point that produces a clean, precise
cut. For those intricate lines, this bit is superior to standard ‘V’ groover. Makes
crisp, clean cuts in solid woods, MDF and acrylics.
B
Router Bits
B1 ØD a° B Flute B1 Ød L Tool No.
9/16 60° 1/2 3 7/16 1/4 2-1/4
a˚ 9/16 60° 1/2 3 7/16 1/2 2-1/4
D 9/16 60° 1/2 1 7/16 1/4 2-1/2 *
a° * Specialty 1-flute bit designed for optimal use with acrylics.
Industrial Quality
1:1 45730
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188.
solid cArbide d
cArving liner Straight
Single Flute Plunge
For extra-fine carving and lettering details.
ØD a° B Ød L Tool No. L
a°
1/4 18° 5/8 1/4 2-1/2 45783 Trimming
a°
1:1 45783 Signmaking
D
Grooving
solid cArbide d d
cArving/engrAving Profiling
2 Flute
For fine-line “engraving” in wood and composite materials, use either of these L
L
compact bits. Two-flute configuration and modest length (which minimizes
vibration) combine to produce crisp, clean cuts.
B
a° B Architectural
ØD a° B Ød L Tool No. a°
3/16 82.5° 1/2 1/4 1-5/8 45780 D
D
1/4 60° 3/16 1/4 1-1/2 45782
Jointing
Flooring
1:1 45780 1:1 45782
Door
d d Making
core boX & ‘v’ groove
With Upper Ball Bearing
Carbide Tipped • 2 Flute Solid Surface
Designed for fluting and ‘V’ grooving cuts guided by a template or pattern. The L L
shank-mounted ball-bearing pilot rides along the template edge, and the cutter
duplicates the template contour in the workpiece. With a handheld router, the
template must be on top of the workpiece. With a table-mounted router, the a° B
B
template must be on bottom of the workpiece. R
D
D
ØD a° R B Ød L Type Tool No.
Router Bits
‘V’ Groove 45750 *
Industrial Quality
1/2 90° — 1/2 1/4 2
1/2 — 1/4 3/8 1/4 2 Core Box 45950 Template Template
Replacement Bearing: #47701. Replacement Collar: #47724.
* NOTE: 90° ‘V’ Groove bit is for decorative purposes and
is not intended for ‘miter-folding’, etc.
1:1 1:1 45950
45750
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 55
Reach Tighter Corners Without Burn Marks!
If you’ve often wanted to trim and shape small details in tight corners, but
were disappointed by the scoring and burning left behind by solid pilot bits, we’ve got what you’ve been looking for: eight of the most
commonly used profiles in miniature sizes – complete with tiny miniature ball bearing guides. These bits are perfect for signs, lettering,
small boxes, and musical instruments; essentially any project that requires tiny flush trimming or shaping. Don’t let the small size fool you;
these bits are precisely machined and carbide-tipped.
ØD ØD1 R a° B A Ød L Description Tool No.
7/16 3/16 — — 1/2 1/8 1/4 1-7/8 Rabbet
3/16 3/16 — — 7/16 — 1/4 2 Flush Trim
9/16 3/16 3/32 — 5/16 — 1/4 1-7/8 Roman Ogee
1/4 3/16 — 7° 3/8 — 1/4 1-7/8 Bevel Trim
9/16 3/16 — 45° 1/4 — 1/4 1-7/8 Bevel Trim
3/8 3/16 3/32 — 3/8 — 1/4 1-13/16 Corner Rounding
7/16 3/16 1/8 — 3/8 — 1/4 1-13/16 Corner Rounding
1/2 3/16 5/32 — 3/8 — 1/4 1-13/16 Corner Rounding
Replacement bearing #47775. Hex nut #67135. Lock washer #67129.
d d
d
d
L L L
L
a°
B
B B B
A 1:1 1:1 R 1:1 1:1
D1 MR0100 D1 MR0102 D1 MR0104 D1 MR0106
Router Bits
D D D D
d d d
d
Industrial Quality
L L L L
a°
B B B B
1:1 1:1 R 1:1 R 1:1
R
D1 MR0108 D1 MR0110 D1 MR0112 D1 MR0114
D D D D
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188.
d d
Unique extra small diameter solid carbide compression spiral bit for
intricate work, signmaking, cutting out lettering and shapes. Features
L
special adapter to fit handheld trim routers, routers and CNC machines.
Description ØD ID B B1 Ød L Tool No. ID
B
S.C. Compression Bit 1/8 — 13/16 7/32 1/8 2-1/2
B1
Router Adapter — 1/8 — — 1/4 — D
d
Designed for routing signs. The 60° cutting angle expels excess material quickly
and eliminates chipping and splintering. For use in hardwood, softwood, plywood
and composition material.
ØD a° B Ød L Tool No. L
1-1/8 60° 3/4 1/2 2-3/4
1-1/8 60° 3/4 1/2 2-3/4 *†
* Replacement bearing #47738. Replacement collar #47740. B
† Not for use in CNC machines. a°
Template
D
45788
d
1:1 45788 1:1 45789
L
Router Bits
Industrial Quality
B
a°
D
45789
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com
d
T-sloT
Straight Carbide Tipped • 2 Flute
Plunge Designed for creating T-slot wall panels (used to cut their characteristic slots
for many purposes) and radiused edges on the T-slots (allow easier adjustment
of fixtures on the completed wall panels). Bits are not designed for plunging
L
operations. For best results use in CNC and table-mounted routers.
Trimming
Edge Type ØD ØD1 R a° a1° B B1 Ød L Tool No.
Straight 1-1/8 3/8 — — — 13/16 5/16 1/2 2-1/2 45660
B Radius 1-1/8 3/8 1/4 — — 13/16 5/16 1/2 2-1/2 45666
B1
B1 Straight 1-1/8 1/2 — — — 7/8 3/8 1/2 2-1/2 45662
Signmaking D1 Radius 1-3/8 1/2 1/4 — — 7/8 3/8 1/2 2-1/2 45667
D
Radius 1-13/64 13/32 1/16 — — 43/64 23/64 1/2 2-13/32 45661
Straight
Bevel 1-3/8 3/8 — 30° 15° 35/64 1/4 1/2 2-3/64 45671
d d Note: These tools are designed for ‘groove-forming’ T-slot wall panels, they are not
Grooving designed for plunging operations.
45671
1:1 1:1
Profiling
L
L
a°1 a˚ 45660 45662
B
R B1
B
Architectural
B1 D1
D 1:1 1:1
D1
D Bevel
Radius
Jointing
45666 45667
Flooring
1:1 1:1
45671
45661
Door
Making
Solid Surface
diAmond Tipped (pcd)
‘T’ sloT
Router Bits
‘T’ Slot diamond tipped router (standard ‘T’ slot). Use with particleboard MDF,
both raw or with melamine, veneer, hardwood, etc. Re-sharpen one to two times.
L ØD B D1 # of blades B1 Ød L Max RPM Tool No.
1-3/8 1/4 3/8 2+1 1/16 1/2 2-3/8 30,000 DRB-300-RH
1-3/8 1/4 3/8 2+1 1/16 1/2 2-3/8 30,000 DRB-304-LH **
Industrial Quality
45˚ ** LH indicates LEFT HAND ROTATION.
B1
B
D1 30˚
D
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
58 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
d d
For securing large panels or tabletops in a way that allows them to expand or
contract, due to changes in temperature or humidity. The screw slots prevent
the wood from splitting and the screw from failing. Great for drilling and
creating slots in one operation. Use in a table-mounted router. L L
ØD ØD1 B B1 Ød L Type Tool No.
7/16 11/64 13/16 1/2 1/2 2-1/2 Countersink
1/2 11/64 15/16 1/2 1/2 2-1/2 Counterbore B B
B1 B1
D1 D1
D D
Countersink Counterbore
1:1 55230 1:1 55232
® d
This bit is designed to produce a T-slot for Amerock® hinges. For best results
use in a table-mounted router.
L
ØD ØD1 R B B1 Ød L Tool No.
1-1/8 3/8 5/64 21/32 5/32 3/8 2 *
1-1/8 3/8 5/64 21/32 5/32 1/2 2-1/8 * R B
1-19/32 3/8 5/64 21/32 5/32 3/8 2 *
B1
* These bits are not guaranteed due to fragility and application. D1
D
1:1 48100/48101 1:1 48102
d
Form keyhole slots in plaques, picture frames, and other wall-hanging items
with this plunge-cutting bit. Plunge to form the entry, then advance the router to
Router Bits
Industrial Quality
L
cut a short T-slot. Use in a handheld plunge router.
ØD ØD1 B B1 Ød L Tool No. B
B1
3/8 13/64 3/8 3/16 1/4 1-1/2
D1
1/2 5/16 3/8 3/16 1/4 1-1/2
D
1:1 45650 1:1 45652
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com
d
BOWL & TRAY
Carbide Tipped • 2 Flute
Straight
Plunge For routing solid wood serving trays, flat dishes, shallow bowls, and similar
objects, use this 3-in-1 specialty plunging bit. It cuts flat, smooth bottom
surfaces, vertical walls, and a transition radius between them, all in one pass. It
can be used in handheld, table-mounted and CNC routers.
L
Trimming ØD R B Ød L Tool No.
1/2 1/8 1/2 1/4 2-1/8 45981
3/4 1/4 5/8 1/4 2-5/8 45982
B 3/4 1/4 5/8 1/2 2-5/8 45984
Signmaking R 1-1/8 1/4 5/8 1/2 2-5/8 45986
D
Grooving
45981
Profiling
45982/45984
45986
1:1
Architectural
Jointing
d
BOWL & TRAY
With Upper Ball Bearing Guide
Flooring Carbide Tipped • 2 Flute
Same bit as above, but with a shank-mounted bearing so the bit can be used
with a template or pattern.
L
Replacement
ØD R B Ød L Bearing Collar Tool No.
Door 1/2 1/8 1/2 1/4 2-1/8 47701 47724 45983
Making 3/4 1/4 5/8 1/4 2 47714 47724 45988
B
3/4 1/4 5/8 1/2 2-5/8 47721 47739 45990
R D 1-1/8 1/4 5/8 1/2 2-5/8 47738 47740 45992
Solid Surface
Template
45983
Router Bits
45988/45990
45992
1:1
Industrial Quality
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
60 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
BALL END d
Carbide Tipped • 2 Flute
Straight
Cut channels for pipes or cables using the ball end bit. The profile requires the cut Plunge
to be made in a single pass. To reduce stress on the bit, cut an initial groove using
a straight bit matching the D1 dimension of the ball end bit.
ØD ØD1 R B Ød L Tool No. L
Trimming
1/2 1/4 1/4 7/16 1/2 2-1/4 45960 D1
5/8 9/32 5/16 9/16 1/2 2-3/8 45962
3/4 5/16 3/8 11/16 1/2 2-1/2 45964 B
1 11/32 1/2 15/16 1/2 2-3/4 45968
Note: Profile is useful as a ‘conduit’ for cables, pipes, etc. R Signmaking
D
Grooving
45960
45962 Profiling
45964
45968
Architectural
1:1
Jointing
INSERT cARBIDE BALL END Flooring
Cut channels for pipes or cables using the ball end bit. The profile requires the
cut to be made in a single pass. To reduce stress on the bit, cut an initial groove
using a straight bit matching the D1 dimension of the ball end bit.
L
Single Flute Door
Repl. T.C. Making
ØD ØD1 B R Ød L Screw# Knife Tool No.
5/8 17/32 35/64 5/16 1/2 2-3/4 67117 RCK-52 RC-1122
B
2 Flute Solid Surface
R
3/4 19/32 21/32 3/8 1/2 2-5/8 67112 RCK-53 RC-1124 H D1
1 43/64 15/16 1/2 1/2 2-7/8 67115 RCK-54 RC-1126 H D
Note: Profile is useful as a ‘conduit’ for cables, pipes, etc.
r
! Warning: Maximum RPM 18,000
H Warning: These tools have an open flute design (not anti-kickback) and are
intended for high feed-rate CNC machine use only. Do not use in portable routers.
Router Bits
Industrial Quality
RC-1122
RC-1124
RC-1126
1:1
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 61
d d
Cut half-round grooves for fluted moldings, columns, millwork and signs using
a core box bit. Used with an edge guide, it can cut coves. Can be used with
handheld, table-mounted and CNC routers.
L
L
ØD R B Ød L Tool No.
B 1/8 1/16 3/8 1/4 1-3/4
3/16 3/32 1/2 1/4 1-3/4
R D B
1/4 1/8 1/4 1/4 1-5/8
R 3/8 3/16 1/4 1/4 1-1/2
D RCK-266
3/8 3/16 1/4 1/2 2
RC-45910 1/2 1/4 3/8 1/4 1-1/2
1/2 1/4 1/2 1/4 2-1/8
45900 1/2 1/4 3/8 1/2 2-1/8
5/8 5/16 7/16 1/4 1-5/8
45902
5/8 5/16 7/16 1/2 2
3/4 3/8 7/16 1/4 1-3/4
3/4 3/8 7/16 1/2 2
45918 7/8 7/16 1/2 1/2 2-1/4
45922 1 1/2 5/8 1/4 1-3/4
1 1/2 11/16 1/2 2-1/8
45924
1-1/4 5/8 3/4 1/2 2-5/16 ! 20
45928
! Maximum RPM
! 20 =20,000
Replacement Knife for #RC-45910: #RCK-266 (RC-45910 – single flute).
1:1 Replacement Bearing for #RC-45910: #47701.
Use in a table-mounted router.
CNC
USE ONLY
ØD R B Ød L Max RPM Tool No.
L 1-1/4 5/8 1-1/4 1/2 2-3/4 18,000
1-1/2 3/4 1-1/4 1/2 2-3/4 18,000
2 1 1-1/4 1/2 2-3/4 18,000
B
! Maximum RPM 18,000
These tools have an open flute design (not anti-kickback) and are
R intended for high feed-rate CNC machine use only.
D
Router Bits
Industrial Quality
45944-CNC
45946-CNC
45948-CNC
1:1
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188.
ELONGATED cORE BOX d
Carbide Tipped • 2 Flute • Extra Deep
Straight
Cut much deeper flutes than possible with a regular core box bit. Plunge
ØD R B Ød L Tool No.
3/8 3/16 1 1/2 2-3/4 45930
1/2 1/4 1-1/4 1/2 2-3/4 45932 L
Trimming
9/16 9/32 1-1/4 1/2 2-3/4 45934
5/8 5/16 1-1/4 1/2 2-3/4 45936
3/4 3/8 1-1/4 1/2 2-3/4 45938 B
1 1/2 1-1/4 1/2 2-3/4 45942
1-1/4 5/8 1-1/4 1/2 2-3/4 45944 tr! 20 Signmaking
1-1/2 3/4 1-1/4 1/2 2-3/4 45946 tr! 18 R
D
2 1 1-1/4 1/2 2-3/4 45948 tr! 14
2-1/4 1-1/8 1-1/4 1/2 3 45949 tr! 14
r
! Warning: Maximum RPM r
! 14 =14,000; r
! 18 =18,000; r
! 20 =20,000 Grooving
Note: All core box wood sample illustrations shown actual size.
t Use in a table-mounted router. Not for use in a handheld router!
Profiling
45930
45932
45934
45936 Architectural
45938
45944
45946
45948 Jointing
45949
1:1
SOLID cARBIDE d
Flooring
up-cuT SpIRAL fLuTE
2 Flute • Ball Nose
Used for carving, decorative doors and sign manufacturing. Up-Cut design leaves
an excellent finish and expels chips quickly.
Door
ØD B Ød L Tool No. Making
L
1/4 1 1/4 2-1/2 46376
3/8 1-1/4 3/8 3 46378
1/2 1-1/4 1/2 3 46380
1/2 2-1/8 1/2 4 46384 B Solid Surface
5/8 2-1/8 5/8 4 46386 H
3/4 2 3/4 4 46388 H
r
! Warning: Recommended RPM 20,000-21,000
D
H Warning: These tools have an open flute design (not anti-kickback) and are
intended for high feed-rate CNC machine use only. Do not use in portable routers.
Router Bits
Industrial Quality
SOLID cARBIDE d
BOTTOM ROuND
2 Flute
Developed for producing round bottomed grooves in hardwood and softwood, plywood
and composition material. Used for engraving and carving. L
ØD R B Ød L Tool No.
1/4 1/8 3/8 1/4 2-1/2 45784
B
R
D
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 63
d
cLASSIcAL GROOVE
Carbide Tipped • 2 Flute
Straight
Plunge Use this bit to form a bead-sided groove with a rounded bottom to embellish
solid wood surfaces. It can be used in handheld, table-mounted and CNC
routers, guided with an edge guide, fence, or in conjunction with a template
guide bushing.
L
Trimming ØD R R1 B Ød L Tool No.
1/2 3/32 9/64 7/16 1/4 2 56108
3/4 9/64 5/32 1/2 1/4 2-1/16 56110
3/4 9/64 5/32 1/2 1/2 2-3/4 56112
B
Signmaking 1 13/64 1/4 11/16 1/2 3 56114
R
R1
D
Grooving
Profiling 56110/56112
56114
Architectural
1:1
Jointing
Flooring
d
cLASSIcAL GROOVE
With Upper Ball Bearing Guide
Carbide Tipped • 2 Flute
Door Rout decorative grooves on solid wood or MDF panels and surfaces with a
Making handheld or CNC router. Form edges with a hand router equipped with an edge
L guide or on a router table. Shank-mounted bearing allows cuts to be guided
by a template mounted atop the workpiece.
ØD R R1 B Ød L Tool No.
Solid Surface
7/8 5/32 7/32 1/2 1/4 2 56130
B
R 1-3/8 1/4 13/32 9/16 1/2 2-5/8 56140
R1
D Replacement Parts:
Ball Bearing Lock Ring Tool No.
47708 47748 56130
Template 47734 47750 56140
Router Bits
Template
56130
Industrial Quality
56140
1:1
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
64 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
cLASSIcAL GROOVE d
With Upper Ball Bearing Guide
Straight
Carbide Tipped • 2 Flute Plunge
Rout decorative grooves on solid wood or MDF panels and surfaces with a
handheld or CNC router. Form edges with a hand router equipped with an edge
guide, or on a router table. Shank-mounted bearing allows cuts to be guided by a L
template mounted atop the workpiece. Trimming
ØD ØD1 R B Ød L Tool No.
7/8 .319 9/64 3/8 1/4 2 56148
1-3/8 .522 13/64 9/16 1/2 2-5/8 56150 B
R Signmaking
Replacement Parts: D1
Ball Bearing Lock Ring Tool No. D
47708 47748 56148
47734 47750 56150 Template Grooving
Template
56148 Profiling
56150
1:1
Architectural
ROuND OVER GROOVE
d
Jointing
Carbide Tipped • 2 Flute
This bit creates a flat-bottom groove between two quarter-round shapes. Short
vertical walls extending below the radius lend extra depth to the appearance. Flooring
Depending upon the cut depth adjustment, the radii can be flush with the work
surface or recessed. The profile can be formed on an edge using an edge guide L
or, on the router table using a fence.
ØD ØD1 R B B1 Ød L Tool No. B
R B1
3/4 .240 1/4 1/2 3/8 1/2 2 49700
Door
.615 .240 3/16 1/2 3/16 1/2 2-1/8 49701 Making
D1
7/8 .245 5/16 9/16 7/16 1/2 2-1/16 49702
D
7/8 1/2 1/8 1-1/4 1-1/8 1/2 2-1/2 49720 *
1 .250 3/8 5/8 15/32 1/2 2-1/8 49704
1-3/8 .363 1/2 1 3/4 1/2 2-1/2 49706 Solid Surface
1-3/4 .500 5/8 1-1/4 1 1/2 2-3/4 49708 tr! 14
2 .500 3/4 1-7/16 1-1/8 1/2 2-15/16 49710 tr ! 14
r
! Warning: Maximum RPM r
! 14 =14,000
t Use in a table-mounted router. Not for use in a handheld router!
* Elongated Plunge.
Router Bits
Industrial Quality
49700
49702
49706
49708
49720
1:1 1:1 49710
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 65
d d
pOINT cuTTING
Straight
56125
ROuNDOVER†
Plunge Carbide Tipped • 2 Flute
56126 For trimming, lettering & fluting.
L L
ØD R B B1 Ød L Tool No.
B1
Trimming 1:1 56128 1/4 1/8 5/16 1/8 1/4 2 56125 *
B
B1 R
B 3/8 3/16 19/64 3/16 1/4 1-7/8 56126
R
D 19/32 19/64 1/2 19/64 1/4 2-9/64 56128
D
56125 * Solid Carbide
Signmaking † Bit not guaranteed due to a very fine plunge point.
Use Tool #56125 with
Grooving
Tongue & Groove Assembly #55400 on page 125.
56125
Profiling 55400 55400
1:1
Architectural
Jointing
d
ROuND OVER GROOVE
Flooring Plunge Ovolo Router Bits
Carbide Tipped • 2 Flute
Rout decorative grooves on solid wood or MDF panels and surfaces
L with a handheld or CNC router. Form edges using an edge guide.
ØD R R1 B Ød L Tool No.
Door
Making 1-3/4 23/32 — 23/32 1/2 2-3/16 49570
B
1-5/8 1 — 23/32 1/2 2-3/16 49572
R 1-5/8 19/32 1/4 23/32 1/2 2-3/16 49574
D
Solid Surface
49572
49570
d 1:1
Router Bits
L
Industrial Quality
B
R1
R 1:1 49574
D
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
66 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
d
56100
Quarter-round profiles are formed by this bit as it grooves, one on each side
of a flat. The scale and depth of the beading profile distinguishes it from the 56170
round over at left. Used with a fence or edge guide, this beading bit can be used 56172
as an edge former. L
56174
ØD ØD1 R B Ød L Tool No. 56178
25/64 1/8 3/32 23/64 1/4 1-29/32 B 56179-CNC
1/2 1/4 1/8 3/8 1/4 1-7/8 R 1:1
3/4 1/2 1/8 3/8 1/4 2 D1
7/8 1/2 13/64 15/32 1/4 2-3/16 D
1-1/8 1/2 5/16 9/16 1/2 2-3/4 ! 14
1-1/4 1/2 3/8 5/8 1/2 2-9/16
! Maximum RPM
! 14 =14,000
Use in a table-mounted router.
These tools have an open flute design (not anti-kickback) and are
intended for high feed-rate CNC machine use only.
d
Rout a flat-bottom groove with ogee shoulders. Decorate any solid wood surface
using a handheld or CNC router.
ØD ØD1 R B Ød L Tool No. L
3/4 .256 9/64 1/2 1/2 2-3/4
1/2 .157 5/64 3/8 1/4 2
B 56118
1:1
R D11
D
D
d
CNC
USE ONLY
ØD ØD1 R B B1 Ød L Tool No.
1-3/8 23/64 1/2 1 3/4 1/2 2-1/2
2 1/2 3/4 1-7/16 1-1/8 1/2 2-15/16 L
! Maximum RPM 14,000
These tools have an open flute design (not anti-kickback) and are
intended for high feed-rate CNC machine use only. B
R B1
Router Bits
Industrial Quality
D1
D
49706-CNC
49710-CNC
1:1
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com
d d
OGEE GROOVE
Carbide Tipped • 2 Flute
Straight
Plunge This bit is similar to the ogee groove bits on the previous page, but these form a
L flat-bottom groove with a reverse ogee and step profile for the shoulders.
L
ØD ØD1 R B Ød L Tool No.
B 13/16 5/16 1/8 17/32 1/4 1-3/4 56200
Trimming R
15/16 5/16 5/32 21/32 1/4 1-7/8 56204
D1 B
D 1 3/8 3/16 19/32 1/2 1-7/8 56208
R 1-3/16 15/32 15/64 19/32 1/2 1-7/8 56210
D1
D
Signmaking
56200
Grooving 1:1 56208
56204 1:1 56210
Profiling
Architectural
Jointing
d
ROuND & OGEE GROOVE
Carbide Tipped • 2 Flute
Flooring Rout decorative grooves on solid wood or MDF panels and surfaces with a
handheld or CNC router. Form edges using an edge guide.
L ØD R R1 B Ød L Tool No.
1-5/8 3/8 3/4 23/32 1/2 2-3/16 49232
Door B
Making
R1
R
D
Solid Surface 1:1
d
RAISED pANEL GROOVE
Carbide Tipped • 2 Flute
Rout decorative grooves on solid wood or MDF panels and surfaces
Router Bits
with a handheld or CNC router. Form edges using an edge guide.
L ØD ØD1 a° B Ød L Tool No.
1-1/8 .454 30° 1/2 1/2 2-3/4 56116
Industrial Quality
B
a˚
D1
D
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
68 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
CHAMFER d
With Ball Bearing Guide
Straight
Carbide Tipped • 2 Flute Plunge
Chamfer or bevel edges for decorative effect or to form edge miter joints.
Produce crisp, uniform edges at accurate angles to make 4-, 6-, 8-, 12-, or aa°° L
16-sided boxes. For best results use in a router table.
Trimming
a° ØD B C Ød L Tool No. C B
45° 1-1/4 1/2 5/8 1/4 2 49400
45° 1-1/4 1/2 5/8 1/2 2-3/8 49402
45° 2 3/4 1-1/8 1/2 2-1/2 49404 t* D
45° 2-3/8 1 1-3/8 1/2 2-7/8 49406 tr! 18† Signmaking
45° 3 1-1/8 1-1/2 1/2 3 49405 tr! 16
11-1/4° 7/8 1 1 1/2 2-7/8 49407
15° 7/8 3/4 25/32 1/4 2-1/4 49408
22-1/2° 1-1/4 15/16 7/8 1/2 2-7/8 49410 Grooving
30° 1-3/8 13/16 7/8 1/4 2-1/4 49412
30° 1-3/8 13/16 7/8 1/2 2-3/4 49414
60° 2-1/2 11/16 1-1/8 1/2 2-3/4 49416 tr! 16
Profiling
Replacement bearings: #’s 49400 & 49402 use #47704.
#49405 use #47710. All other tools use #47706.
* 49404 will completely chamfer 3/4" material.
† 49406 will completely chamfer 1" material.
r
! Warning: Maximum RPM r
! 16 =16,000; r
! 18 =18,000 Architectural
t Use in a table-mounted router. Not for use in a handheld router! 49412/49414 30°
49405 45°
Jointing
49406 45°
49404 45°
49407 11.25°
49400/49402 45° Flooring
49408 15°
49416 60°
Door
1:1 1:1 Making
Solid Surface
Router Bits
Industrial Quality
49412 49410 49408 49407
6 sides (30°) 8 sides (22.5°) 12 sides (15°) 16 sides (11.25°)
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 69
d
CNC
USE ONLY
Insert router bit complete with two cutting flutes. Suitable for producing chamfer
cuts at various angles in softwood, hardwood and man-made boards. Cutting
angle can be adjusted in 7.5° steps by using a notched scale. Fine adjustment
of 1° is also possible. For use on routers and machining centers with CNC control.
L Max Repl. T.C.
ØD B a° Ød L RPM Knife Tool No.
85mm(3-3/8) 40mm(1-1/2) -45° to +90° 3/4 100mm(4) 12,000 RCK-40
B
48mm
118.5mm
8.5mm 18.5mm
18.5mm
D
75º 90º
40 60º Artwork not
38 shown at
34 45º
actual size.
28 20 30º
10
15º
10
20
28
34
40
Router Bits
Chamfer both sides of workpiece.
Industrial Quality
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188.
d
With Ball Bearing Guide
Chamfer both corners of an edge in one pass with this assembly. Switch from
30° or 45° chamfers by switching cutter positions on the arbor. Interchangeable
B11
B
spacers adjust assembly to accommodate different stock thicknesses. The a°1 L
assembly includes the arbor, a pair of multi-angle cutters, pilot bearing, spacers
and shims. Replacement parts are available separately. For best results use in a
router table. B
ØD a°1 a°2 B1 Ød L Tool No.
1-3/8 30° 45° 9/16 1/2 4-1/4
a°2 B11
B
Description Tool No.
Top Replacement Cutter (R/H) D
Bottom Replacement Cutter (L/H)
Ball Bearing Guide, 5/16 x .865
1/2" Shank Arbor With Nut
6mm Spacer (2 required)
0.5mm Shims (1 required)
0.1mm Shims (4 required)
1.0mm Black Washer (4 required)
45° 30°
B Max. With Ball Bearing
B B B B
B Min. Without Bearing, 3/4" 1-5/8" 5/8" 1-1/2"
Deduct Approx. 5/16" min. max. min. max.
From Min. Dimension.
1:1 1:1
45° 30°
Router Bits
Industrial Quality
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com
d d
CORNER ROuNdING
With Ball Bearing Guide
Straight
Plunge Carbide Tipped • 2 Flute
The basic edge-forming bit, the corner-rounding bit rounds an edge to a given
radius. The tool is shouldered to cut a fillet. The cut can be used to ease edges,
L L
as a simple profile, or as a part of a complex one. Also known as roundover,
Trimming rounding over and quarter-round. If a smaller pilot bearing is used, a second
B shoulder can be produced, in effect making the bit a beading bit.
B
R R
ØD R B Ød L Tool No.
D 5/8 1/16 5/16 1/4 1-3/4 49492
D
Signmaking RC-49504 5/8 1/16 5/16 1/2 2-1/4 49494
3/4 1/8 3/8 1/4 2 49496
1 1/8 3/8 1/4 2-3/16 RC-49496
3/4 1/8 3/8 1/2 2-5/16 49498
Grooving 13/16 5/32 3/8 1/4 2 49499
RCK-272
13/16 5/32 3/8 1/2 2-1/4 49501
49492 7/8 3/16 1/2 1/4 2 49500
49496/RC-49496 7/8 3/16 1/2 1/2 2-7/16 49502
Profiling 49498 1 1/4 1/2 1/4 2 49504
49500 1 1/4 1/2 1/4 2-1/16 RC-49504
49504/RC-49504
1 1/4 1/2 1/2 2-7/16 49506
49508
49512 1-1/8 5/16 1/2 1/4 2-1/16 49508
1-1/8 5/16 1/2 1/2 2-7/16 49510
Architectural
1-1/4 3/8 5/8 1/4 2-3/16 49512
1-1/4 3/8 5/8 1/2 2-9/16 49514
1:1 1-3/8 7/16 5/8 1/2 2-9/16 49515
49515 1-1/2 1/2 3/4 1/4 2-1/4 49516
Jointing
49516 1-1/2 1/2 3/4 1/2 2-5/8 49518
49517 1-5/8 9/16 3/4 1/2 2-5/8 49517
49519 1-3/4 5/8 7/8 1/2 2-3/4 49519 r ! 14
Flooring
49520 2 3/4 1 1/2 2-7/8 49520 r ! 14
49523 2-1/4 7/8 1-1/4 1/2 3-1/16 49521 r ! 14
49524 2-1/2 1 1-1/4 1/2 3-3/16 49522 r ! 14t*
49526 2-3/4 1-1/8 1-3/8 1/2 3-1/4 49523 r ! 10t*
3 1-1/4 1-1/2 1/2 3-1/4 49524 r ! 10t*
3-1/2 1-1/2 1-3/4 1/2 3-5/8 49526 r ! 10t*
Door * Not guaranteed due to extreme diameter and radius. For best results it is
Making recommended to use a smaller radius bit or chamfer the material prior to using
these large radius tools. Tool life will be prolonged and a smoother finish will result.
Replacement knife #RCK-268 (2 required).
Solid Surface Replacement knife #RCK-272 (2 required).
1:1 Replacement bearing #47706.
r
! Warning: Maximum RPM r
! 10 =10,000; r
! 14 =14,000
t Use in a table-mounted router. Not for use in a handheld router!
Router Bits
Industrial Quality
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
72 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
bEAdING d
With Ball Bearing Guide
Straight
Carbide Tipped • 2 Flute Plunge
Cut a quarter-round shape bounded by fillets, known as a bead, in one pass by
this bit. The width of one fillet is set by the pilot bearing size, while the other is
L
controlled by the depth of cut. A beading bit can be transformed into a corner
rounding bit by changing the bearing (& vice versa). Trimming
B
ØD R B Ød L Tool No. R
5/8 1/16 5/16 1/4 1-3/4 49592
3/4 1/8 3/8 1/4 2 49596
D
3/4 1/8 3/8 1/2 2-5/16 49598 Signmaking
7/8 3/16 1/2 1/4 2 49600
7/8 3/16 1/2 1/2 2-7/16 49602
1 1/4 1/2 1/4 2 49604
1 1/4 1/2 1/2 2-7/16 49606 Grooving
1-1/8 5/16 1/2 1/4 2-1/16 49608
1-1/8 5/16 1/2 1/2 2-7/16 49610
1-1/4 3/8 5/8 1/4 2-3/16 49612
1-1/4 3/8 5/8 1/2 2-9/16 49614 Profiling
1-1/2 1/2 3/4 1/4 2-1/4 49616
1-1/2 1/2 3/4 1/2 2-5/8 49618
1-3/4 5/8 7/8 1/2 2-3/4 49619 r ! 14
2 3/4 1 1/2 2-7/8 49620 r ! 14
Architectural
2-1/2 1 1-1/4 1/2 3-3/16 49622 r ! 14t*
* Not guaranteed due to extreme diameter and radius. For best results it is 49608
recommended to use a smaller radius bit or chamfer the material prior to using 49604
these large radius tools. Tool life will be prolonged and a smoother finish will result.
49600 Jointing
Replacement bearing #47702.
49596
r
! Warning: Maximum RPM r
! 14 =14,000
49592
t Use in a table-mounted router. Not for use in a handheld router! 1:1 Flooring
49622
Door
49620 Making
49619
49616
49612 Solid Surface
1:1
Router Bits
Industrial Quality
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 73
d
CORNER ROuNdING
With Ultra-Glide™ Radius Bearing
Straight
Plunge Carbide Tipped • 2 Flute
A unique pilot bearing allows you to produce a true 180° bullnose with this
corner rounding bit. Unlike a regular square-edge bearing, it follows the radiused
L surface produced on the first pass. Will neither leave a flat spot nor gouge the
Trimming edge. Use the (optional) regular 1/4" x 5/8" steel bearing for the first pass.
B
R Repl.
ØD A R ØD1 B Ød L Bearing Tool No.
1-9/32 3/4 3/8 58 9/16 1/2 3-3/4 47766 57191
Signmaking 1-5/8 1 1/2 5/8 3/4 1/2 2-3/4 47767 57190
D1
2-1/8 1-1/2 3/4 5/8 1 1/2 3 47768 57192
D
2-5/8 2 1 5/8 1-1/4 1/2 3-3/16 47769 57194 r ! 18t
Standard steel 1/4" x 5/8" bearing - use #47712 (order separately).
Grooving r
! Warning: Maximum RPM r
! 18 =18,000
t Use in a table-mounted router. Not for use in a handheld router!
Profiling
57194
57192
Architectural
57190
57191
Jointing
A
1:1
Flooring
Door
Making
Solid Surface
Router Bits
Industrial Quality
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
74 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
d
This is no ordinary corner rounding bit! A guide ring on the bit perimeter coupled
with a guide bearing above the profile allows you to round the edges of stock
that curves in two planes. Just what’s needed for shaping chairs or any furniture
that has compound curves. This unique tool is available in a 1/8" or 1/4" radius.
Repl.
L
ØD R B Ød L Alum. Ring Tool No.
1 1/8 5/16 1/2 3-13/16 47790
1-7/16 1/4 13/32 1/2 3-29/32 47792
Replacement bearings #47706 and #47721.
Replacement allen screw #67011.
Replacement lock ring #67176.
Replacement allen key #67165.
B
R
D
d
With Ball Bearing Guide
L
Eliminate the time-consuming hand-filing that normally follows each laminate
B
cutting job. Cutting a fillet, using a standard corner rounding bit, leaves a sharp
edge on the laminate. This unique bit “breaks” the sharp edge of the laminate, R
as it cuts the fillet together with a quarter-round shape in one pass.
D
ØD R B Ød L Tool No.
Router Bits
Industrial Quality
1-1/8 1/4 17/32 1/4 2
1-5/16 3/8 5/8 1/4 2-1/8
Replacement bearing #47706.
.050
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com
d
bullNOsE
Carbide Tipped
Straight
Plunge 2 Flute & 3 Flute (51566 Only)
Shape the full edge of a workpiece with a bullnose radius bit. Ideal for shaping
stair treads, window sills, table and counter edges, shelves, and making
L moldings. The “nose diameter” (M) is the thickness of stock that can be nosed,
Trimming i.e., given a full 180-degree roundover. Flats at top and bottom of the cutting
edges create fillets on stock thicker than the nose diameter. Must be used with
R M B an edge guide on handheld routers or the fence on a router table.
*‘M’ R B ØD Ød L Tool No.
Signmaking D 5/32 5/64 1/2 17/32 1/4 1-3/4 51540
7/32 7/64 1/2 19/32 1/4 1-3/4 51542
19/64 9/64 3/4 21/32 1/4 1-7/8 51544
5/32 5/64 1/2 17/32 1/2 2 51550
Grooving 7/32 7/64 1/2 19/32 1/2 2 51552
51540 51542 51544 51558 51559
9/32 9/64 3/4 21/32 1/2 2-1/4 51554
1:1
27/64 13/64 3/4 7/8 1/2 2-1/4 51556
35/64 17/64 1 1-1/32 1/2 2-1/2 51558
Profiling 5/8 5/16 1 1-1/8 1/2 2-1/2 51559
3/4 3/8 1-5/16 1-1/4 1/2 2-3/4 51560 r ! 20
1 1/2 1-9/16 1-11/16 1/2 3-1/16 51562 r ! 14
1-1/4 5/8 2 2 1/2 3-1/2 51564 r ! 10t
1-1/2 3/4 2 2-3/8 1/2 3-1/2 51566 r ! 10t†
Architectural
† #51566 is 3 flute (all others are 2 flute).
‘B’ *‘M’ 51560 51562 51564 51566
r
! Warning: Maximum RPM r
! 10 =10,000; r
! 14 =14,000; r
! 20 =20,000
t Use in a table-mounted router. Not for use in a handheld router!
Jointing
1:1
Flooring
d
bullNOsE
Door With Ball Bearing Guide
Making
Carbide Tipped • 2 Flute
*‘M’ R B ØD Ød L Tool No.
1/8 5/64 1/2 17/32 1/4 2-1/8 51565
Solid Surface L 3/16 7/64 1/2 19/32 1/4 2-1/8 51567
1/4 9/64 3/4 21/32 1/4 2-3/8 51568
R M B 3/8 13/64 3/4 7/8 1/2 2-3/4 51569
51565 51567 51568 35/64 17/64 1 1-1/16 1/2 2-7/8 51570
1:1 3/4 3/8 1-5/16 1-3/8 1/2 3-1/4 51572 r ! 20
1 1/2 1-19/32 1-13/16 1/2 3-1/2 51574 r ! 18
1-1/4 5/8 2 2 1/2 3-7/8 51576 r ! 14t
D
Very useful for template or pattern routing. Ball bearing is the same size as the small
Router Bits
diameter of the tool and rides against the template for an exact duplication.
* ‘M’ denotes thickness of material on which a full 180° roundover can be
accomplished.
Replacement bearings:
Tool #’s 51565, 51567, 51568, 51569, 51570 use #47706.
Industrial Quality
51569 51570 ‘B’ *‘M’ 51572 51574 51576 Tool #51572 use #47716.
Tool #’s 51574 & 51576 use #47714.
1:1 r
! Warning: Maximum RPM r
! 14 =14,000; r
! 18 =18,000; r
! 20 =20,000
t Use in a table-mounted router. Not for use in a handheld router!
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
76 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
CORNER bEAdING d
With Ball Bearing Guide
Straight
Carbide Tipped • 2 Flute Plunge
Produce three slightly different profiles using this bit – an edge bead with or
without a fillet and a full corner bead – by altering the bit extension or rolling the
workpiece between passes. This group of hard-to-find tools is particularly L
suitable for antique reproductions and restoration projects. Use in a handheld or Trimming
table-mounted router.
R B11 B
B
ØD ØD1 R B B1 Ød L Tool No.
45/64 5/8 1/16 5/16 1/8 1/4 1-11/16 54161
49/64 11/16 3/32 25/64 3/16 1/4 1-3/4 54163 D1 Signmaking
7/8 3/4 1/8 9/16 1/4 1/4 2-1/8 54160 D
7/8 3/4 1/8 9/16 1/4 1/2 2-1/2 54162
1-1/8 1 3/16 11/16 3/8 1/4 2-1/4 54164
1-1/8 1 3/16 11/16 3/8 1/2 2-5/8 54166 Grooving
1-1/4 1-1/8 1/4 23/32 17/32 1/4 2-5/16 54168
1-1/4 1-1/8 1/4 23/32 17/32 1/2 2-11/16 54170
1-1/2 1-3/8 3/8 1 3/4 1/2 2-7/8 54172
Profiling
Replacement bearing for #54160 – #54163 use #47706.
All other tools use #47716.
54172
54168 Architectural
54164
54160/54162
54163
54161
Jointing
1:1
Flooring
COVE & bEAd d
With Ball Bearing Guide Door
Making
Carbide Tipped • 2 Flute
The reverse cove-and-bead bit, which has the cove coming off the bearing,
produces the reverse of the classical cove and bead. Radii of both cove and bead
are identical. Use in a handheld or table-mounted router. L Solid Surface
ØD R B Ød L Tool No.
1 5/32 5/8 1/4 2-1/8 49208 B
R
1 5/32 5/8 1/2 2-1/2 49210
1-3/8 1/4 7/8 1/4 2-1/4 49212 R
1-3/8 1/4 7/8 1/2 2-5/8 49214 D
Replacement bearing #47704.
Router Bits
Industrial Quality
1:1 49208/49210 49212/49214
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 77
d ClAssICAl bEAd & COVE
With Ball Bearing Guide
Straight
Plunge Carbide Tipped • 2 Flute
This bead and cove combines the two basic forms, separating them with a fillet.
The cove comes off the pilot bearing. Produce a complex profile in a single pass.
L
Use in a handheld or table-mounted router.
Trimming
B ØD R R1 B Ød L Tool No.
R 1-1/4 13/64 5/16 1/2 1/4 2 54102
R1 1-1/4 13/64 5/16 1/2 1/2 2-3/8 54104
D 1-1/2 7/32 15/64 5/8 1/4 2-1/8 54106
Signmaking 1-1/2 7/32 15/64 5/8 1/2 2-1/2 54108
Replacement bearing #47706.
Grooving
1:1 54102/54104 1:1 54106/54108
Profiling
ClAssICAl COVE & bEAd
With Ball Bearing Guide
Architectural Carbide Tipped • 2 Flute
The positions of the bead and the cove are reversed on this series of bits, with
the bead coming off the bearing. With the optional 3/8" pilot bearing, the bit
produces a fillet at the base of the bead. Largest diameter bits should be run
Jointing at reduced speed. Use in a handheld or table-mounted router.
ØD R R1 B Ød L Tool No.
1-1/8 5/32 5/32 1/2 1/4 2 54128
Flooring 1-3/8 1/4 3/16 11/16 1/4 2-3/16 54130
B 1-1/8 5/32 5/32 1/2 1/2 2-3/8 54132
1-3/8 1/4 3/16 11/16 1/2 2-9/16 54134
A 1-1/2 3/16 5/16 5/8 1/2 2-1/2 54292
2 11/32 11/32 1-1/4 1/2 3-1/8 54100 r ! 18
2 3/8 3/8 1 1/2 2-3/4 54135 r ! 18
Door A Standard 1/2" bearing #47706 (included).
d
Making
B Optional 3/8" bearing #47702 (order separately).
r
! Warning: Maximum RPM r
! 18 =18,000
Solid Surface d
d
L
B
R L
R1
L
Router Bits
B
R
B
D R1
R
R11
R
D
Industrial Quality
54130 54128
1:1 54135 54100 1:1 54292 54134 1:1 54132
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
78 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
COVE d
With Ball Bearing Guide
Straight
Carbide Tipped • 2 Flute Plunge
The covetto form – produced by the cove bit – is one of the classic building
blocks for many molding profiles. Use it alone or in combination with beads and L
fillets. Use the cove to detail the edges of casework, doors and drawers, posts
B
and columns. The cove also makes up one-half of the rule joint used on drop-leaf Trimming
tables, the other half is the corner-round.
R
For best results with a large radius cutter, make a preliminary cut with a smaller
D
radius bit or chamfer the workpiece to reduce the amount of stock to be removed
in the finish pass. This will produce a smoother finish and prolong tool life. The
largest diameter bits must be run at reduced speed. Use in a handheld or table- Signmaking
mounted router. d
ØD R B Ød L Tool No.
1/2 1/16 1/2 1/4 2 49092
Grooving
5/8 1/8 1/2 1/4 2 49094
3/4 3/16 9/16 1/4 2 49100
L
3/4 3/16 9/16 1/2 2-3/8 49102
7/8 1/4 9/16 1/4 2 49104 Profiling
1 1/4 1/2 1/4 2-1/16 RC-49104 B
7/8 1/4 9/16 1/2 2-3/8 49106 R
RCK-274
1 5/16 9/16 1/4 2-1/8 49108
D
1 5/16 9/16 1/2 2-3/8 49110 RC-49104
1-1/8 3/8 9/16 1/4 2 49112 Architectural
1-1/8 3/8 9/16 1/2 2-3/8 49114
1-3/8 1/2 3/4 1/4 2-1/4 49116
1-3/8 1/2 3/4 1/2 2-1/2 49118
1-5/8 5/8 11/16 1/2 2-1/2 49119 r ! 18 Jointing
2 3/4 1 1/2 2-7/8 49120 r ! 12
2-1/4 7/8 1-1/4 1/2 3-1/8 49121 r ! 12†t
2-1/2 1 1-1/4 1/2 3 49122 r ! 12†t
Flooring
† Not guaranteed due to extreme diameter & radius. For best results, it is
recommended to use a smaller radius bit or chamfer the material prior to using
these large radius tools. Tool life will be prolonged and a smoother finish will result.
Replacement bearings: Tool #’s 49120, 49121 & 49122 use #47706.
All other tools use #47704 bearing.
Replacement knife #RCK-274 (2 required). Door
Making
r
! Warning: Maximum RPM r
! 12 =12,000; r
! 18 =18,000
t Use in a table-mounted router. Not for use in a handheld router!
49092 1/16"R
Solid Surface
49094 1/8"R
49100 3/16"R
49106 1/4"R & RC-49104
49110 5/16"R
49114 3/8"R
49116 1/2"R
49119 5/8"R
49120 3/4"R
Router Bits
Industrial Quality
49121 7/8"R
49122 1"R
1:1
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 79
d
lARGE RAdIus OVOlO
Carbide Tipped • 2 Flute
Straight
Plunge Now you can make extra-large coves with your router. This bit is perfect for
creating beautiful coves for furniture or architectural crown moldings. With this
bit you can make large coves in any wood species that you want. You’ll never
need to purchase cove molding again.
Trimming L ØD R B Ød L Tool No.
1-5/8 2 1-3/4 1/2 3-1/4 49124
2-1/16 2-3/4 2-3/16 1/2 3-13/16 49126
B
Signmaking
R
D
Grooving
R
Profiling
Architectural
Jointing
Flooring
Door
Making
d
ClAssICAl COVE
With Ball Bearing Guide
Solid Surface Carbide Tipped • 2 Flute
A cove flanked by step fillets, a classical project used in period moldings,
is produced by this tool. Use in a handheld or table-mounted router.
L
ØD R B Ød L Tool No.
B 1-1/8 3/16 1/2 1/4 2 54144
1-3/8 5/16 5/8 1/2 2-1/2 54150
R
Replacement bearing #47706.
Router Bits
D
Industrial Quality
1:1 54144 54150
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
80 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
OGEE FIllEt d
With Ball Bearing Guide
Straight
Carbide Tipped • 2 Flute Plunge
This ogee pattern has a step at the end of the concave portion of the curve.
Using the optional 3/8" bearing produces a profile with a fillet at the convex
end of the curve. Use in a handheld or table-mounted router. L
Trimming
ØD R B Ød L Tool No. B
1-3/8 5/32 1/2 1/4 2-1/16 54110
1-3/8 5/32 1/2 1/2 2-1/2 54112 R
1-5/8 1/4 3/4 1/2 2-5/8 54114
2-1/4 3/8 15/16 1/2 2-7/8 54127 r ! 18 Signmaking
D
A Standard 1/2" bearing #47706 (included).
B Optional 3/8" bearing #47702 (order separately).
r
! Warning: Maximum RPM r
! 18 =18,000
Grooving
B
Profiling
54127 A
54114
54110/54112
Architectural
1:1
Jointing
Flooring
ROMAN OGEE d
With Ball Bearing Guide
Carbide Tipped • 2 Flute
The Roman ogee bit, which has a convex curve coming off the bearing,
produces the reverse of the ogee (it isn’t an upside-down ogee). The curve Door
starts at the top as a concave, and fairs down into a convex curve. Use in L Making
a handheld or table-mounted router.
ØD R B Ød L Tool No. B
1 5/32 5/8 1/4 2-1/8 49200
R Solid Surface
1 5/32 5/8 1/2 2-1/2 49202
1-3/8 1/4 13/16 1/4 2-1/4 49204
D
1-3/8 1/4 13/16 1/2 2-5/8 49206
2 3/8 1 1/2 3 49207
Replacement bearing for #49207 use #47706.
All others use #47704 bearing.
Router Bits
Industrial Quality
49207
49204/49206
49200/49202
1:1
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 81
Multi-Profile Router Cutter System
Straight
Plunge The Nova System™ gives you a wide range of profiling options in a single router bit
with replaceable carbide tips. The innovation is in the bit. The easily replaceable hard
carbide blades gives a whole range of profile options in a single bit, as well as other
vital advantages such as durability, versatility, safety, service-free and cost effectiveness.
Trimming
bOdY tYpE A bOdY tYpE ‘A’
For Edge Form Routing For Edge Form Routing
Description L Tool No.
Signmaking Body ‘A’ 1/2" Shank 3 NS-106
concave convex
knife
retainer
knife
retainer
AVAIlAblE kNIVEs
For Edge Form Body
Grooving
R R1 a° ØD B Tool No.
Corner Round Knives, Sold as Pair
Profiling 1/8 — — 1-3/8 11/16 NRC-A03
3/16 — — 1-3/8 11/16 NRC-A04
Body type ‘A’ includes both concave and convex 1/4 — — 1-3/8 11/16 NRC-A05
knife retainers and ball bearing guide. 5/16 — — 1-3/8 11/16 NRC-A06
3/8 — — 1-1/2 11/16 NRC-A07
Architectural
Beading Knives, Sold as Pair
Tool Body
3/16 — — 1-3/8 11/16 NRC-A08
5/16 — — 1-1/2 11/16 NRC-A10
Jointing
Carbide Chamfer Knives, Sold as Pair
Knives
— — 45° 1-1/2 11/16 NRC-A02
Knife
Flooring Retainers Cove Knives, Sold as Pair
(2 Types) 1/4 — — 1-3/8 11/16 NRC-A11
5/16 — — 1-3/8 11/16 NRC-A12
3/8 — — 1-1/2 11/16 NRC-A13
Special Cove Knives, Sold as Pair
Door Ball Bearing Guide 3/16 — — 1-3/8 11/16 NRC-A14
Making Hex Lock Nut
Ogee Knives, Sold as Pair
D
5/32 11/64 — 1-3/8 11/16 NRC-A15
5/32 11/64 — 1-1/2 11/16 NRC-A16
Solid Surface
R
Roman Ogee Knives, Sold as Pair
5/32 — — 1-3/8 11/16 NRC-A17
D
Cove & Bead Knives, Sold as Pair
5/32 — — 1-3/8 11/16 NRC-A18
5/32 — — 1-1/2 11/16 NRC-A19
Double Roman Ogee Knives, Sold as Pair
Router Bits
R
5/32 — — 1-1/2 11/16 NRC-A20
Knives are marked
to indicate which Classical Cove Knives, Sold as Pair
retainer is needed. 3/16 — — 1-3/8 11/16 NRC-A21
Classical Molding Knives, Sold as Pair
Industrial Quality
5/32 — — 1-3/8 11/16 NRC-A22
5/32 — — 1-1/2 11/16 NRC-A23
Ordering Instructions: Choose the plunge type body ‘A’ #NS-104 (1/4" shank)
or #NS-106 (1/2" shank) and then select the desired profile knives listed above.
Replacement knife retaining screws #67084 (2 required). Replacement hex key #5007.
Replacement ball bearing #47714. Replacement hex lock nut #67089.
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
82 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
Straight
Plunge
Trimming
bOdY tYpE ‘b’ bOdY tYpE b
For Plunge Routing For Plunge Routing
Description L Tool No.
Body ‘B’ 1/2" Shank 2-5/8 NS-102 Signmaking
Tool Body
AVAIlAblE kNIVEs
For Plunge Body
Grooving
R a° ØD B Tool No.
‘V’ Groove Knives, Sold as Pair Carbide
Knives
— 45° 3/8 1/4 NRC-B51 Profiling
— 30° 1/2 3/8 NRC-B52
Core Box Knives, Sold as Pair
1/4 — 1/2 3/8 NRC-B53
1/2 — 1 1/2 NRC-B54 Architectural
Classical Knives, Sold as Pair
5/32 — 3/4 7/16 NRC-B55
B Jointing
Ordering Instructions: Choose the plunge type body ‘B’ #NS-100 (1/4" shank) or a˚
#NS-102 (1/2" shank) and then select the desired profile knives listed above.
Replacement knife retaining screws #67084 (2 required). Replacement hex key #5007.
Flooring
21 Profiles Available for Body Type ‘A’ (for Edge Form Routing)
Door
Making
1:1 1:1 1:1 1:1 1:1 1:1 1:1 1:1
NRC-A02 NRC-A03 NRC-A04 NRC-A05 NRC-A06 NRC-A07 NRC-A08 NRC-A10
Solid Surface
1:1 1:1 1:1 1:1 1:1 1:1 1:1 1:1
NRC-A11 NRC-A12 NRC-A13 NRC-A14 NRC-A15 NRC-A16 NRC-A17 NRC-A18
1:1 1:1 1:1 1:1 1:1
Router Bits
Industrial Quality
NRC-A19 NRC-A20 NRC-A21 NRC-A22 NRC-A23
5 Profiles Available for Body Type ‘B’ (for Plunge Routing)
1:1 1:1 1:1 1:1 1:1
NRC-B51 NRC-B52 NRC-B53 NRC-B54 NRC-B55
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 83
d
HAND GRIP PLUNGE
Carbide Tipped • 2 Flute
Straight
Plunge Intended for forming and edging internal hand-helds and cutouts in a single
pass, this bit will also cut a soft bullnose on any exposed edge. Use in a CNC
or other automatic router. Plunge cuts on router table are not recommended.
ØD a° R B B1 B2 Ød L Tool No.
Trimming 1-1/8 45° 1/2 1-9/16 7/8 1-1/4 1/2 3-5/8 51590
L
Signmaking B2 B1
R B
a˚
Grooving 1:1
D
Profiling
d BULLNOSE/COVE EDGE
With Ball Bearing Guide
Carbide Tipped • 2 Flute
Cut a thumbnail in a single pass, flanked top and bottom by a fillet and a
cove, a combination often called an astragal. Three sizes scaled for stock
Architectural 3/4" through 1-1/2" thick. Should be used in a table-mounted router. The
L tool is equipped with a ball-bearing guide for template work.
R
R1 B ØD R R1 B Ød L Tool No.
Jointing R 1-1/8 1/8 1/4 1 1/2 2-7/8 51530
Replacement bearing #47716.
D
Flooring
1:1
Door
Making
d d CONVEX EDGING
With or Without Ball Bearing Guide
Carbide Tipped • 2 Flute
Solid Surface
Cuts a shallow arc – the fingernail shape – rather than a full 180-degree
roundover. Like the bullnose radius bit, it has short flats above and below the
cutter arc, which produce fillets on stock thicker than 7/8". Must be used with
L L
an edge guide on handheld routers, or the fence on a router table.
ØD R B B1 Ød L Tool No.
R B1 B R B1 B 13/16 23/32 1-1/4 27/32 1/4 2-1/2 51580
13/16 23/32 1-1/4 27/32 1/2 2-3/4 51582
Router Bits
29/32 23/32 1-1/4 27/32 1/2 2-3/4 51586 *†
D Cuts a shallow radius (‘thumbnail’ shape) on board edges.
* Replacement bearing for #51586 use (2) #47712.
† Not for use in CNC machines.
D
51586
Industrial Quality
1:1
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
84 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
CLASSICAL MOLDING d
With Ball Bearing Guide
Straight
Carbide Tipped • 2 Flute Plunge
A double quarter-round profile is produced by this tool. The depth-of-cut
setting determines whether or not a fillet is formed at the top. Switching from
the standard pilot bearing to the optional 3/8" bearing introduces a fillet at the L
bottom of the profile. Use in a handheld or table-mounted router. Trimming
B
ØD R B Ød L Tool No. R
1-1/8 5/32 1/2 1/4 2 54136 R
1-3/8 7/32 11/16 1/4 2-3/16 54138
1-1/8 5/32 1/2 1/2 2-3/8 54140 Signmaking
1-3/8 7/32 11/16 1/2 2-9/16 54142 D
1-1/2 1/4 3/4 1/2 2-3/4 54141
A Standard 1/2" bearing #47706 (included).
Grooving
B Optional 3/8" bearing #47702 (order separately).
Profiling
1:1 54136/54140 1:1 54138/54142 1:1 54141 A
Architectural
Jointing
WAVY EDGE d Flooring
With Ball Bearing Guide
Carbide Tipped • 2 Flute
This bit produces an undulating curve with two convex forms flanking a concave
form. All the radii are equal. A shoulder on the cutter can form a fillet, depending
L
upon the depth-of-cut setting. Use in a handheld or table-mounted router. Door
Making
ØD R B Ød L Tool No. B
R
1-1/4 5/32 11/16 1/4 2-1/4 54180 R
1-1/4 5/32 11/16 1/2 2-5/8 54182
Replacement bearing #47706. Solid Surface
D
1:1 54180/54182
Router Bits
Industrial Quality
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 85
d
REED EDGE
Carbide Tipped • 2 Flute
Straight
Plunge Produces a thumbnail flanked by full beads, an elegant edge profile. Must be
used with an edge guide or router-table fence to control the cut. For stock
L between 3/4" and 1" thick.
R
ØD R R1 B Ød L Tool No.
Trimming R1 B 3/4 5/64 15/64 1 1/4 2-1/8 54360
R
D
Signmaking
Grooving 1:1
Profiling
Architectural
d
OGEE
With Ball Bearing Guide
Jointing
Carbide Tipped • 2 Flute
The ogee is one of the basic shapes used in moldings and decorative profiles.
An S-shaped curve, it is convex at the top fairing down into a concave (shown
L
Flooring inverted). The ogee bit is characterized by the concave shape coming off the
pilot bearing. Using the optional 3/8" bearing produces a profile with a fillet
B at the convex end of the curve. Use in a handheld or table-mounted router.
R
R1 ØD R R1 B Ød L Tool No.
1-1/8 5/32 5/32 1/2 1/4 2 54120
D
Door 1-3/8 1/4 3/16 11/16 1/4 2-3/16 54122
Making 1-1/8 5/32 5/32 1/2 1/2 2-3/8 54124
1-3/8 1/4 3/16 11/16 1/2 2-9/16 54126
A Standard 1/2" bearing #47706 (included).
B Optional 3/8" bearing #47702 (order separately).
Solid Surface
A
Router Bits
54122/54126
54120/54124
1:1
Industrial Quality
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
86 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
‘LEAF-EDGE’ BEADING d
With Ball Bearing Guide
Straight
Carbide Tipped • 2 Flute Plunge
In one pass, this bit forms a round-edged groove near the corner of the
workpiece. A second pass on the adjoining face yields a delicate leaf-shaped
corner bead. Use in a handheld or table-mounted router. L
R Trimming
ØD R B Ød L Tool No.
B
1 3/16 1/2 1/4 2-1/2 54190
1-1/8 1/4 5/8 1/4 2-5/8 54192
Replacement bearings #47712 (2 required).
D Signmaking
Replacement collar #47724.
One
Pass Grooving
1:1 54190 54192 Profiling
Two
Passes
Architectural
Jointing
FLUTE & BEAD SET d
Carbide Tipped • 2 Flute Flooring
Cut joints for staved assemblies, such as circular planters, canoes, kayaks
and hot tubs, with this pair of bits. One bit flutes an edge, and the other forms
the mating bead. Use in CNC or table-mounted routers. It will cut plywood, L1
hardwood, softwood and composition materials. For the best and accurate
R
match, we recommend using a table-mounted router.
B1 Door
ØD R B B1 Ød L L1 Tool No. Making
D
1-1/2 1/8 1/2 1/4 1/2 2 1-3/4 54176
Fluting
Set of 2 bits. Not sold separately.
d
Solid Surface
1:1
Fluting Beading
L
R B
Router Bits
Industrial Quality
D
Beading
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 87
d VARIABLE BEADING
Carbide Tipped • 2 Flute
Straight
Plunge Three different radii of beads are stacked on this one bit. Rout all three on
an edge, or use it to nose thin stock. Router-table use recommended for
best control, but use in a handheld router is possible. Must be used with an
edge guide.
L
Trimming ØD R R1 R2 B Ød L Tool No.
R
7/8 9/64 7/64 1/16 1-1/16 1/2 2-5/8 54216
B
R1
R2
Signmaking D
Grooving
1:1
Profiling
Architectural
d
MATCHED BEAD
With Ball Bearing Guide
Jointing Carbide Tipped • 2 Flute
This dual purpose bit produces both moldings and joints. Use in place of
matched flute-and-bead bit sets to mill the edges of strips used in various
stave constructions like planters, canoes and hot tubs. Switch from fluting
Flooring L to beading by raising or lowering the bit. Pilot bearing allows use for template-
guided cuts. Recommended for router table use; smaller sizes can be used
B with an edge-guide equipped portable router.
R
ØD R B Ød L Tool No.
1-1/4 3/16 1 1/2 2-7/8 54186
Door 2 1/4 1-1/4 1/2 3 54188 r ! 18
Making D
Replacement bearing for #54186 use #47706.
Replacement bearing for #54188 use #47716.
r
! Warning: Maximum RPM r
! 18 =18,000
Solid Surface
54188
Router Bits
54186
Industrial Quality
1:1
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
88 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
EDGE MOLDING d
With Ball Bearing Guide
Straight
Carbide Tipped • 2 Flute Plunge
The torus-and-cove profile produced by this bit make an excellent edge detail or
molding. The pilot bearing allows you to make template-guided cuts with the bit.
Use in a handheld or table-mounted router. L
Trimming
ØD R R1 B Ød L Tool No. R B
1-1/4 5/32 5/32 7/8 1/2 2-3/4 54322 R1
1-9/16 7/32 15/64 1-3/16 1/2 3 54324
Replacement bearing for #54322 use #47706.
Replacement bearing for #54324 use #47712. 54324 D Signmaking
54322
Grooving
1:1
Profiling
d
MULTI-EDGE BEADING
With Double Ball Bearings Architectural
Carbide Tipped • 2 Flute
Produce beading detail on edges or moldings. Use in a handheld or
table-mounted router.
L Jointing
ØD R B Ød L Tool No.
1 3/16 7/8 1/4 2-7/8 54296 R B
Replacement bearings #47712 (2 required).
Replacement collar #47724. Flooring
D
1:1
Door
Making
Solid Surface
EDGE BEADING
d
Carbide Tipped • 2 Flute
Similar to the corner bead, but with a radiused, rather than a hard-edged quirk.
Since this bit lacks a pilot, it must be used with a fence or edge guide. Use in a
handheld or table-mounted router. L
ØD ØD1 R B Ød L Tool No.
Router Bits
Industrial Quality
7/8 1/2 5/32 1-1/32 1/2 2-3/4 54208 R
B
R
D1
D
1:1
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 89
d
EDGE FLUTING
With Ball Bearing Guide
Straight
Plunge Carbide Tipped • 2 Flute
This bit produces a fingernail flute, rather than a full 180° radius flute. Creates
an interesting edge detail, and can be used to make small-scale cornice-type
moldings. Use in a handheld or a table-mounted router.
Trimming L
ØD R B C Ød L Tool No.
3/4 5/16 1/2 1/8 1/2 2-3/4 54302
B
7/8 15/32 3/4 3/16 1/2 3 54304
7/8 3/4 1 3/16 1/2 3-1/4 54306
R
Signmaking 1 1-1/4 1-1/2 1/4 1/2 3-3/4 54308
C Replacement bearing #47706.
D
54308
Grooving
54306
Profiling
54304
54302
Architectural
1:1
Jointing
Flooring
d
EDGE-FLUTING ASSEMBLY
With Upper & Lower Ball Bearing Guides
Carbide Tipped • 2 Flute
Door Cut individual flutes – shallow, small-radius grooves – in narrow edges without
Making having to balance a router on that edge. The bit cuts at right angles to the bit
L
axis. Flute depth is controlled by the pilot bearing, the flute’s position by the
router’s bit-height setting. Use in a handheld or table-mounted router.
R B
Solid Surface ØD R B C Ød L Tool No.
3/4 1/8 1/4 1/8 1/4 2-1/4 54330
C 7/8 13/64 3/8 1/4 1/4 2-3/8 54332
D
Replacement bearings #47701 (upper) and #47706 (lower).
Replacement collar #47724.
Router Bits
1:1 54330 54332
Industrial Quality
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
90 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
DOUBLE BEADING d
With Ball Bearing Guide
Straight
Carbide Tipped • 2 Flute Plunge
Produce pairs of beads on the edges of shelving or narrow molding strips.
Use in a handheld or table-mounted router.
L
ØD R B Ød L Tool No. Trimming
7/8 1/8 3/4 1/2 2-5/8 54294 R
B
Replacement bearing #47716. R
Signmaking
D
1:1
Grooving
Profiling
TRIPLE BEADING/ d d
TRIPLE FLUTING
With Ball Bearing Guide
Carbide Tipped • 2 Flute Architectural
Three uniform beads or flutes are formed in one pass with these bits.
Produce reeded or fluted pilasters or table legs referencing opposite faces L L
of the workpiece. Use in a handheld or table-mounted router.
Jointing
R B R B
ØD Type R B Ød L Tool No.
7/8 Bead 1/8 1 1/4 2-5/8 54211
7/8 Bead 1/8 1 1/2 3 54213
7/8 Flute 1/8 1 1/2 3 54217 Flooring
D D
Replacement bearing #47716. Fluting Beading
Door
Making
1:1 1:1
54211 54217
Solid Surface
TRIPLE BEADING
d
Carbide Tipped • 2 Flute
Three uniform beads are formed in one pass with this bit. Use it to produce
reeded pilasters or table legs. Must be used with an edge guide or fence.
Use in a handheld or table-mounted router.
Router Bits
Industrial Quality
L
ØD Type R B Ød L Tool No.
7/8 Bead 1/8 1 1/4 2-1/4 54210
R B
7/8 Bead 1/8 1 1/2 2-3/4 54212
1:1
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 91
d RABBET
With Ball Bearing Guide
Straight
Plunge Carbide Tipped • 2 Flute
This is the basic rabbeting bit. It cuts 3/8" wide and up to 1/2" deep. Switch
to one of four optional ball-bearing guides to alter the width of cut. Use in a
L handheld or table-mounted router.
Trimming
ØD A B Ød L Tool No.
B
1-1/4 3/8 1/2 1/4 2 49300
RCK-264 1-1/8 3/8 1/2 1/4 1-7/8 RC-49300
1:1 1-1/4 3/8 1/2 1/2 2-3/8 49302
A
Signmaking 49300/49302 Replacement Knife #RCK-264 (2).
D
Replacement bearing: #RC-49300 use #47702.
d
Grooving A Replacement Bearings:
Standard 3/8 Rabbet — 47706
A
OR 7/16 Rabbet — 47702
L OR 5/16 Rabbet — 47718
Profiling OR 1/4 Rabbet — 47720
B
D
Architectural RC-49300 RC-49300
Jointing d MulTi-RABBET sET
With Ball Bearing Guide
Carbide Tipped • 2 Flute
Flooring Six Different Rabbet Depths
The Multi-Rabbet bit steps in 1/16" increments from a 1/8" cut width to 1/2",
L
simply by switching ball-bearing guides. Six different bearings are provided.
Depth of cut capacity of 1/2". Use in a handheld or table-mounted router.
B
ØD A B Ød L Tool No.
Door A 1-3/8 1/8, 1/4, 5/16, 3/8, 7/16, 1/2 1/2 1/4 2 49340
Making 1-3/8 1/8, 1/4, 5/16, 3/8, 7/16, 1/2 1/2 1/2 2-3/8 49350
D
A Replacement Bearings:
Solid Surface 1/2 Rabbet 47702
7/16 Rabbet 47706
3/8 Rabbet 47718
5/16 Rabbet 47720
1/4 Rabbet 47719
1/8 Rabbet 47743 Set #6000
Set #6000: Complete replacement kit includes 6 bearings, hex key, washer & screw.
Router Bits
Screw #67094. Washer #67202.
1/2 7/16 3/8 5/16 1/4 1/8
Industrial Quality
1:1 1:1 1:1 1:1 1:1 1:1
1/2" rabbet use 7/16" rabbet use 3/8" rabbet use 5/16" rabbet use 1/4" rabbet use 1/8" rabbet use
#47702 bearing #47706 bearing #47718 bearing #47720 bearing #47719 bearing #47743 bearing
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
92 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
d
CNC
USE ONLY
With Scorer 2+2 Design
Insert rabbeting router bit complete with two cutting flutes and scorer. Suitable
for trimming and rabbeting in softwood, hardwood and man-made boards. Scorer
will give an improved finish at the bottom of the cut. For use on routers and
machining centers with CNC control.
L
Repl. T.C. Repl. T.C. Max
ØD B Ød L Knife Knife RPM Tool No.
40mm(1-1/2) 30mm(1-3/16) 3/4 100mm(4) RCK-30 RCK-70 18,000
B
40mm(1-1/2) 50mm(2) 3/4 120mm(4-3/4) RCK-50 RCK-70 18,000
60mm(2-3/8) 30mm(1-3/16) 3/4 100mm(4) RCK-30 RCK-70 18,000
60mm(2-3/8) 50mm(2) 3/4 120mm(4-3/4) RCK-50 RCK-70 18,000 D
d
With Ball Bearing Guide
Designed for the “smart clip” backsplash system.
L
ØD A B Ød L Tool No.
1-1/16 9/32 7/8 1/2 2-5/8 B
Replacement bearing #47706.
A
D
1:1
Router Bits
Industrial Quality
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com
5/8" d
supERABBET ™
*use #67426 With Ball Bearing Guide
collar
Straight
49360
Plunge This ingenious tool features both interchangeable cutting edges and an
3/4" interchangeable guide collar, enabling you to cut a wide range of rabbets.
*use (2) #47701 Changing the collars on the twin ball-bearing guide steps the cut width in
bearings 1/16" increments from flush through 3/4" with five extra “plywood” sizes.
L Between the standard and optional collars, there are 18 different rabbet sizes
Trimming
available. The deep guide collar design adds stability to the tool for hand-held
B router operations. The basic 2"-diameter bit includes a hex key, instructions,
and all necessary parts for 5/8" and 3/4" width rabbets. The “RC” version has
extra-long double-edged carbide inserts which enables the bit to cut 30mm
high. Inserts can be rotated or replaced without removing the bit from the router.
Signmaking
A Carbide Tipped • 2 Flute
D ØD A B Ød L Tool No.
Carbide Tipped #49360 2 5/8 & 3/4 7/8 1/2 3 49360 t
Grooving
r
! Warning: Maximum RPM r
! 22 =22,000
5/8" d Replacement Screw for bearing #67094. Replacement Washer for bearing #67202.
*use #67426
Replacement Spacer Bearing #67206.
Profiling collar t Use in a table-mounted router. Not for use in a handheld router!
3/4" Torx Screw
#67115
Insert Carbide • 2 Flute
*use (2) #47701
bearings Repl.
Architectural ØD A B Ød L Knives Tool No.
L 2 5/8 & 3/4 30mm 1/2 3-3/8 RCK-30* RC-49360
B r! Warning: Maximum RPM r ! 17 =17,000
Jointing * Standard general purpose replacement knives = #RCK-30; Knives also available for
MDF & solid surface materials – see replacement carbide section on pages 203–206.
RCK-30* #6002: Complete replacement kit for #49360 and #RC-49360. Includes the following:
hex key, spacers, screw, washer, #67426 (5/8" rabbet) collar and 2 ball bearings.
A
Flooring D Recommended by:
18 Different Depths With 1 Tool!
Carbide Inserts #RC-49360 See Optional Collars on Next Page.
Torx Key #5005.
Door
Making
d
iNsERT supERABBET, JR™
With Ball Bearing Guide
Insert Carbide • 2 Flute
Solid Surface A scaled-down version of the Superabbet,™ this tool features four-sided
replaceable carbide knives and a reduced cut depth capacity. It uses the same
twin ball-bearing guide collar assortment to produce the same extensive range
L
of precise rabbet widths. The standard tool is supplied with a collar for 1/2"
B rabbet width. Optional collars are available individually and in five-piece and
17-piece kits.
AMA-12*
ØD A B Ød L Tool No.
A 1-1/2 Flush to 1/2"† 12mm(.472) 1/2 2-19/32 RC-49355
Router Bits
D r
! Warning: Maximum RPM r
! 22 =22,000
† Using optional collars on next page. Standard depth=1/2"
Torx Key #5005. Torx Screw #67115.
* Standard general purpose replacement knives = #AMA-12; Knives also available for
MDF & solid surface materials – see replacement carbide section on pages 203–206.
Industrial Quality
13 Different Depths With 1 Tool!
See Optional Collars on Next Page.
1:1
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
94 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
ACCEssORiEs FOR
iNsERT supERABBET ™ & Straight
iNsERT supERABBET, JR™ Collars and Kits Plunge
Individual Collars
Collar ‘A’ Rabbet Depth
Diameter 49360/RC-49360 RC-49355 Order No. Trimming
2 Flush — 67398
1-7/8 1/16 — 67400 1:1 1:1 1:1
1-3/4 1/8 — 67402 flush rabbet 1/16" rabbet 7/64" rabbet
1-5/8 3/16 — 67404 Signmaking
1-17/32 15/64(6mm) — 67406
1-1/2 1/4 Flush 67408
1-3/8 5/16 1/16 67410
1-9/32 23/64(9mm) 7/64 67412 Grooving
1-1/4 3/8 1/8 67414
1-1/8 7/16 3/16 67416 1:1 1:1 1:1
1-1/16 15/32(12mm) 7/32 67418 1/8" rabbet 3/16" rabbet 7/32" rabbet
1 1/2 1/4 67420 Profiling
7/8 9/16 5/16 67422
13/16 19/32(15mm) 11/32 67424
3/4 5/8 3/8 67426
3/4 5/8 3/8 67427
5/8 11/16 7/16 67428 Architectural
9/16 23/32(18mm) 15/32 67430 1:1 1:1 1:1
15/64"(6mm) rabbet 1/4" rabbet 5/16" rabbet
Jointing
Collar Kits:
Insert Superabbet ™
#67500: 6-piece collar kit includes: #67398, #67400, #67402, #67408, #67414, Flooring
#67420.
#67600: 5-piece collar kit includes: #67404, #67410, #67416, #67422, #67428. 1:1 1:1 1:1
#67800: 21-piece collar kit includes: two #47701 bearings, #67206 spacer, #5000 11/32" rabbet 23/64"(9mm) rabbet 3/8" rabbet
allen key, #67094 allen screw and 16 individual collars: #67398, #67400,
#67402, #67404, #67406, #67408, #67410, #67412, #67414, #67416,
#67418, #67420, #67422, #67424, #67428, #67430. Door
Making
NOTE: 5/8" and 3/4" depth is standard with #49360 & #RC-49360.
Insert Superabbet, Jr ™
1:1 1:1 1:1 Solid Surface
#67350: 5-piece collar kit includes: #67408, #67410, #67414, #67420, #67426.
7/16" rabbet 15/32"(12mm) rabbet 1/2" rabbet
#67355: 17-piece collar kit includes: two #47701 bearings, #67206 spacer, #5000
allen key, #67094 allen screw and 12 individual collars: #67408, #67410,
#67412, #67414, #67416, #67418, #67420, #67422, #67424, #67426,
#67428, #67430.
Router Bits
Industrial Quality
1:1 1:1 1:1
9/16" rabbet 19/32"(15mm) rabbet 5/8" rabbet
1:1 1:1
11/16" rabbet 23/32"(18mm) rabbet
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 95
™
Amana Tool® introduces the new in-Tech™ Series insert router bits to provide all woodworkers access to the industrial-grade
technology at an affordable price. In-Tech™ router bits are priced comparable to standard router bits but last up to four times longer,
saving users money during the life of the tool as knives are replaced rather than the entire tool. Ideal for routing softwood/hardwood
and harder materials such as MDF & Chipboard.
Router Bits
• Cutting accuracy remains constant during the life of the insert carbide knife
• Priced comparably to brazed router bits with at least 4 times longer tool life
• Superior cutting quality
• No re-sharpening costs
• Nine popular profile sizes in 1/4" shank
Industrial Quality
• Harder grade tungsten carbide
For more information visit:
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188.
iN-TECh™ REplACEABlE iNsERT CARBidE kNivEs
Industrial Quality • 2 Flute
Straight
New line of popular insert router bit profiles provide all woodworkers access to the industrial-grade technology, at an affordable price. Plunge
By replacing worn knives instead of sharpening standard carbide tipped bits, router bit dimensions, cutting quality and accuracy remain
constant during the life of the tool. Ideal for routing softwood/hardwood as well as harder materials such as MDF & Chipboard.
ØD A R B a° Ød L Description Repl. Knives Repl. BB Tool No.
Trimming
1 — 1/4 1/2 — 1/4 2-1/16 Corner Round RCK-272* 47706 RC-49504
1 — 1/4 1/2 — 1/4 2-1/16 Cove RCK-274* 47706 RC-49104
1-1/32 — 3/16 5/8 — 1/4 2-3/8 Ogee Fillet RCK-276* 47706 RC-54111
1-1/8 3/8 — 1/2 — 1/4 1-7/8 Rabbet RCK-264* 47702 RC-49300
1/2 — — 20mm — 1/4 2-5/16 Flush Trim RCK-262* 47706 RC-47104 Signmaking
1 — 1/8 3/8 45° 1/4 2-3/16 (2 in 1) Corner Round or Bevel RCK-268* 47706 RC-49496
11/16 — — 11/32 45° 1/4 2-1/8 V-Groove/Signmaking AMA-12 — RC-45711
1/2 — 1/4 1/2 — 1/4 2-1/8 Core Box RCK-266 47701 RC-45910
1/2 — — 30mm — 1/4 2-5/8 Straight Plunge AMA-30 — RC-45226 Grooving
* Replacement insert knives sold as a pair.
d d d
RCK-272 RCK-274 RCK-276 Profiling
L L L Architectural
1:1 1:1 1:1
B
B B
R
R R Jointing
D D D
RC-49504 RC-49104 RC-54111
Flooring
RCK-264 d AMA-12 d RCK-266 d
Template
L Door
L L Making
1:1 1:1 1:1
B
A a° B
B Solid Surface
D
R
RC-49300 D D
RC-45711 RC-45910
d d d
RCK-262
RCK-268
Router Bits
Industrial Quality
AMA-30
2 in 1
L
L 1:1
L
1:1 B
B a°
B 1:1
1:1
D
D RC-49496
D RC-47104
RC-45226
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 97
r
! Warning: Before use, read router bit safety guidelines on pages 186-188.
Whether you’re an architectural woodworking specialist or simply a woodworker wanting to add value and detail to your home,
we have the tools that you need. Our assortment of architectural woodworking router bits include beautiful crown, casing, and
base molding profiles as well as matching sets for creating stunning wainscot.
One of the easiest ways to dress up a room is to replace the skimpy base
molding with a wide, bold profile. Amana offers classic ogee profiles in two
sizes so that you can choose a size that best fits with the architectural details
in the room. For quick easy installation we recommend that you attach the
molding to the top of the base. This method greatly simplifies installation by
allowing for a butt joint on inside corners.
ØD R R1 B B1 Ød L Tool No.
1-7/16 5/16 3/8 19/32 3/8 1/2 2
1-53/64 19/64 13/32 3/8 — 1/2 2 *
* Not for use in CNC machines.
Replacement bearing #47706.
Replacement screw #67014.
d
B1
B
R
R1 1:1 54297
D
d
Router Bits
Industrial Quality
B
R
R1 1:1 54299
D
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com
d
(Door & Window Opening Moldings)
Make your own door and window casing in cherry, oak or any wood specie that
you prefer. This bit makes beautiful classic colonial window and door trim. You can
even make curved window casing – perfect for trimming that Palladian window.
ØD ØD1 R R1 B Ød L Tool No.
1-17/32 51/64 3/8 1/4 2-3/4 1/2 4-1/2
L
R
B
R
R1
a°
1:1 54295
D1
D
d
With Ball Bearing Guide
An edge bead without a quirk is produced by this bit. Several different profile
proportions are available. The depth-of-cut setting determines whether or not
you get a fillet above the bead. Use in a handheld or table-mounted router.
L
R1 ØD R R1 B Ød L Tool No.
B 1 1 3/32 7/8 1/2 2-3/4
Router Bits
R 1 19/32 5/32 7/8 1/2 2-3/4
1 13/32 3/16 7/8 1/2 2-3/4
Replacement bearing #47716.
D
Industrial Quality
1:1 54350 54354 54356
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188.
Straight
Plunge
Trimming
WAiNscot sets Signmaking
Bead, Bevel, Classic & Ogee Styles
No other architectural feature adds quality and value to your home like wainscot
paneling. Now you can make your own wainscot with the Amana wainscot router Grooving
bit sets. Each three-piece set comes with a beautiful profile bit for the stile-and
rail edges, a cope bit for flawless joints at each intersection, and a chair rail bit
for a beautiful finishing touch.
Profiling
Carbide Tipped • 2 Flute • 3/4" Material
ØD R R1 a° B B1 Ød L Type Tool No.
1-21/32 1/8 1/4 — 1 — 1/2 2-7/8 Chair Rail 54266
3 Piece Set Including 49440, 49442 & 54266 49686
1-5/16 — — 33° 1/2 9/32 1/4 2 Bevel Stile 49440 Architectural
1-1/2 — — 33° 3/8 9/32 1/4 2 Bevel Rail 49442
3 Piece Set Including 49640, 49642 & 54266 49684
1-1/8 1/4 — — 3/8 1/4 1/4 2 Bead Stile 49640
Jointing
1-1/4 1/4 — — 5/16 7/64 1/4 2 Bead Rail 49642
Cut a rabbet along the
3 Piece Set Including 49664, 49666 & 54266 49680 #54266 inside edges of all
1-1/2 11/32 — — 9/16 1/4 1/4 2 Ogee Stile 49664 the frame members.
1-9/32 11/32 — — 3/8 1/8 1/4 2 Ogee Rail 49666 See pages 92–95
#49664
for Rabbeting Bits. Flooring
3 Piece Set Including 49674, 49676 & 54266 49682
1-5/16 3/16 — — 5/8 7/32 1/4 2 Classical Stile 49674 #49666
1/4"
1-1/2 3/16 — — 9/16 1/8 1/4 2 Classical Rail 49676 Plywood
Replacement bearing for stile cutters #47702 (3/8" diameter).
Replacement bearing for rail cutters #47701 (1/2" diameter).
Replacement collar for rail cutters #47724. Constructing Wainscot
Door
Making
Set #49680 d
Set #49686
a˚
Solid Surface
1:1 49664 1:1 49666
1:1 49440 1:1 49442 1:1 54266
L
B
Set #49684 R
R1
Router Bits
Industrial Quality
1:1 54266 D
1:1 1:1 49642 d d
49640 1:1 54266
Set #49682
L
B11
B
B
R
B11
B
R B
1:1 49674 1:1 49676 1:1 54266
D D
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 101
d
Produce mid-sized crown,
cove and bead molding profiles
for architectural and furniture
applications. The bits cut the
profile and bevel, as necessary,
which is the show face of the
L workpiece.
R
ØD R R1 B Ød L Tool No.
1-1/4 3/16 7/16 2-1/4 1/2 3-3/4
B
R1
1-1/4 1/2 3/4 2-1/4 1/2 3-3/4
1-1/4 17/32 17/32 2-1/4 1/2 3-3/4
! Maximum RPM
! 16 =16,000
Bevel the top and bottom edges on the table saw to complete the molding. Use
D a 2+ horsepower router, mounted in a table, with a fence to guide the work. To
54400 prolong cutter life, reduce strain on the router. To get the best cut finish, make
several passes to achieve full cut depth. Bevel back edges, cutting off 45° excess,
with one of our chamfer bits.
R R
R1
R1
R1 R1
1:1 1:1 1:1
54400 54402 54404
d
Now you can make extra-large architectural crown moldings with your table-
mounted router. Our new extender bit enables you to make unique crown
moldings in every type of wood. You’re no longer limited to the small selection
of crown moldings at the lumber dealer. This specially designed bit works in
L conjunction with either our vertical or horizontal crown molding bits allowing
you to make crown moldings up to 4-1/2" wide. Bevel back edges, cutting off
R 45° excess, with one of our chamfer bits. For use in a table-mounted router only.
B ØD R R1 B Ød L Tool No.
1-1/4 7/16 3-15/16 2-3/8 1/2 4
R1
Router Bits
D 54410
54410
54410
Industrial Quality
1 2 3 4 54410
54412
54414
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188.
reVersible d
croWN MolDiNG Straight
Carbide Tipped • 2 Flute Plunge
Give your ceilings that finished look!
With this bit you can easily make classic crown moldings with your table-
mounted router. The beautiful profile is a large cove flanked by roundovers.
Use your fence to control the cutting depth and a featherboard to keep the Trimming
stock firmly positioned against the fence. Bevel back edges, cutting off 45°
excess with one of our chamfer bits. L
R
ØD R R1 R2 B Ød L Tool No.
1-1/4 3/8 7/8 7/16 2-7/16 1/2 4-1/16 54412 Signmaking
B
Can be used with other Crown Molding Bits R1
to create many different combinations!
54412 R2 Grooving
54412
D
54412
Profiling
1 2 3 4 Architectural
54412
54410
54414 Jointing
Flooring
horizoNtAl d
croWN MolDiNG
Carbide Tipped • 2 Flute
Now you can make large cove moldings for furniture and trim with your table-
mounted router. This unique bit cuts a large, smooth arc; just what is needed Door
L
to create a cove shaped crown molding for your next piece of furniture Making
casework. Bevel back edges, cutting off 45° excess, with one of our chamfer
bits. For even greater versatility, combine this bit with our crown molding
profiles on pages 102-103. B
R Solid Surface
ØD R B Ød L Tool No.
D
2-1/4 1-3/4 5/8 1/2 2-3/8 54414
Can be used with other Crown Molding Bits
to create many different combinations!
54414
54414
Router Bits
Industrial Quality
54414
1 2 3 4
54414
54410
54412
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 103
d ArchitecturAl MolDiNG
With Ball Bearing Guide
Straight
Plunge Carbide Tipped • 2 Flute
These bits are designed for routing architectural and furniture moldings and
trim. Almost all have the profile laid out vertically, reducing the diameter of the
Type #2
bit. These bits should be used in a 2+ horsepower, table-mounted router, and
Trimming many should be run at reduced speed. Although most have ball-bearing guides,
L guiding the cuts with the fence is recommended.
R
Type ØD R R1 R2 R3 B Ød L Tool No.
R B
#2 7/8 5/32 5/16 — — 1-3/8 1/2 3-3/8 54204
Signmaking #3 1 9/64 3/16 25/32 15/64 1-5/8 1/2 3-1/4 54218
#4 1 1/8 7/8 3/8 — 1-11/16 1/2 3-1/4 54220 r ! 12
R1
#5 1-1/2 5/32 — — — 2 1/2 3-1/2 54250 r ! 14
1:1 54204 #7 1 9/64 3/32 3/4 9/32 1-3/4 1/2 3-5/8 54219
Grooving D
NOTE: Tool #54250 does not have a bearing.
Replacement bearing for all others use #47706.
r
! Warning: Maximum RPM r
! 12 =12,000; r
! 14 =14,000
Profiling
d
Architectural
Type #3 Type #4
r
! 12
Jointing
R L
L
R
Flooring R1
R1 B
R1
B
R2
R2
R1
R3
Door 1:1 54218 1:1 54220
Making D D
d
Solid Surface
d
Type #5
r
! 14
Type #7
Router Bits
L R L
R
R1
B
B R2
R3
Industrial Quality
1:1 54250 D 1:1 54219
D
(No ball bearing)
Duplicates #DC-98
molding pattern
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
104 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
ArchitecturAl MolDiNG
With Ball Bearing Guide
Straight
Carbide Tipped • 2 Flute Plunge
Type ØD ØD1 R R1 R2 R3 B Ød L Tool No.
#8 1-3/8 — 1/8 3/32 1/4 7/16 1-5/8 1/2 3-1/2 54222
#9 1-3/8 7/8 1/8 1/16 1/4 7/16 1-5/8 1/2 3-1/2 54224
Replacement bearing #47706. Trimming
r
! Warning: Maximum RPM r
! 18 =18,000
d
d
Signmaking
r
! 18 r
! 18
Type #8 Type #9
Grooving
R L
R L
R1 R1
Profiling
B
B
R2 R2
R3 Architectural
R3
1:1 54222 1:1 54224 D1
D D
Jointing
Flooring
ArchitecturAl MolDiNG d
With Ball Bearing Guide
Carbide Tipped • 2 Flute
Type ØD R R1 B Ød L Tool No.
#12 1-3/16 1/2 1/4 1-3/8 1/2 3-1/4 54234 Door
Type #12 Making
Replacement bearing for #54234 use #47716.
L
R B Solid Surface
R1
1:1 54234
D
Router Bits
Industrial Quality
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 105
d
sPeciAl iNterest MolDiNG
With Ball Bearing Guide
Straight
Plunge Carbide Tipped • 2 Flute
Designed for routing architectural and furniture moldings and trim, these bits
should be used in a 2+ horsepower, table-mounted router, and many should be
run at reduced speed. Although most have ball-bearing guides, guiding the cuts
Trimming r
! 18 L with a fence is recommended.
R1 B Repl.
R ØD R R1 R2 B Ød L Bearing Tool No.
1-9/16 5/32 1/2 — 1-1/8 1/2 3 47712 54232
Signmaking 1-5/8 1/8 3/8 1/4 1-1/8 1/2 3 47706 54260
1:1 54232 2 5/16 1/4 — 1 1/2 2-7/8 47706 54266
D
r
! Warning: Maximum RPM r
! 18 =18,000
Grooving d
d
Profiling
r
! 18
L
R
r
! 18
L
Architectural
B B
R
R1 R1
R2
Jointing
1:1 54260 1:1 54266 D
D
Flooring
sPeciAl iNterest MolDiNG
With Ball Bearing Guide
Carbide Tipped • 2 Flute
Door
Making Repl.
ØD R R1 B Ød L Bearing Tool No.
1-3/4 23/64 — 1 1/2 3 47712 54286
1-3/4 3/8 3/32 1 1/2 3 47706 54288
Solid Surface r
! Warning: Maximum RPM r
! 18 =18,000
d
d
Router Bits
r
! 18 L
r
! 18 L
B B
R
Industrial Quality
R R1
1:1 54286 1:1 54288
D D
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
106 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
Multi-ForM d
With Ball Bearing Guide
Straight
Carbide Tipped • 2 Flute Plunge
This one bit is designed to cut more than 40 different molding patterns.
By making simple adjustments to the cutter height and fence position,
and making two or more passes, you can produce a wide variety of profiles
and architectural details. Trimming
Use the bit only in a table-mounted router. Available with 1/2" shank only. R2 L
Tool #54198 is a miniature version of the multi-form bit.
R1
Repl. B
ØD R R1 R2 B Ød L Bearing Tool No. Signmaking
R1
1-1/4 3/16 9/64 1/8 1 1/2 2-3/4 47702 54198
2-1/4 23/64 21/64 1/4 1-7/8 1/2 4 47706 54200 r ! 12
R
r
! Warning: Maximum RPM r
! 12 =12,000
Grooving
D
Create over 40 different molding profiles with this one bit!
Profiling
Architectural
Jointing
Flooring
Door
Making
Solid Surface
Router Bits
Industrial Quality
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 107
hAND/tAble eDGe
With Ball Bearing Guide
Straight
Plunge Carbide Tipped • 2 Flute
These special router bits are used for cutting table top edges or used with
handrail side profile bits. Originally designed for easing and profiling the edges of
B tabletops, these bits also are widely used for the same purpose on handrails. See
Trimming page 110 for handrail patterns. Eliminate hard edges, reduce the visual thickness
of a tabletop, and add an elegant detail simultaneously with these bits.
A
ØD R R1 B Ød L Tool No.
1-3/16 15/32 — 3/8 1/4 1-3/4 49540
Signmaking 1-3/16 15/32 — 3/8 1/2 2-1/4 49542
2-3/4 1-3/4 — 5/8 1/2 2-7/8 49550 r ! 16
2-1/2 3/8 — 3/4 1/2 2-3/4 49554 r ! 16
2-1/2 3/8 1/4 3/4 1/2 2-3/4 49556 r ! 16
Grooving 2-5/16 19/64 1/4 7/8 1/2 2-3/4 49558 r ! 16
2-9/16 11/64 1-3/32 3/4 1/2 2-3/4 49560 r ! 16
A Standard 1/2" bearing #47706 (included).
B Optional 3/8" bearing #47702 (order separately).
Profiling
r
! Warning: Maximum RPM r
! 16 =16,000
49556 Ogee-And-Bead
d d
49540/49542 Cuts a shallow ogee into the tabletop
Architectural Elliptical Edge surface coupled with a bead at the
edge. Bit will produce a fillet if set to
Cuts a narrow profile with an
cut deep enough. With the optional 3/8"
arc based on the ellipse rather
bearing, it will produce a fillet at the
than the circle. With the optional
Jointing L
cut’s edge. Good choice for handrails.
3/8" bearing, it will produce a
fillet at the cut’s edge. r
! 16 L
B
R B
Flooring R
1:1 49540/49542 R1
D
1:1 49556
D
d 49550 Table Edge d
Door 49554 Ogee
Making Cuts a wide profile with an arc based
on the ellipse rather than the circle. Cuts a shallow, elongated ogee.
With the optional 3/8" bearing, it will With the optional 3/8" bearing, it
produce a fillet at the cut’s edge. will produce a fillet at the cut’s
Good choice for handrails. edge. Good choice for handrails.
Solid Surface r
! 16 L r
! 16 L
B
B
R
R
D
1:1 49550 1:1 49554
D
Router Bits
d
49558 Double-Cove And Bead d 49560 Thumbnail And Bead
Cuts the thumbnail arc coupled with Cuts the thumbnail arc coupled
a bead around the tabletop surface. with a bead around the tabletop
With the optional 3/8" bearing, it will surface. With the optional 3/8"
produce a fillet at the cut’s edge. bearing, it will produce a fillet at
Industrial Quality
the cut’s edge.
r
! 16
L r
! 16 L
B B
R R
R1
R1
1:1 49558 1:1 49560
D D
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
108 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
tAble eDGes
DesiGNeD bY Straight
With Ball Bearing Guide Plunge
Carbide Tipped • Profiles are designed for 3/4" thick tops.
This selection of table edge profiles from Master Woodworker Lonnie Bird offers
a wide variety of designs from which to choose. All will shape away the hard
edge, add detail, and reduce the visual thickness of the top. Trimming
ØD R R1 B Ød L Tool No.
2-21/64 1/2 1/4 55/64 1/2 2-3/4 49555
2-7/64 1/4 7/16 27/32 1/2 2-3/4 49557
1-5/32 3/8 5/16 7/8 1/2 2-3/4 49559 Signmaking
2 3/8 1/4 55/64 1/2 2-3/4 49561
2-3/8 1/16 — 27/32 1/2 2-25/32 49563
Replacement bearing #47718.
Grooving
d d d
Profiling
L L L
Architectural
B 3/4" B 3/4" B 3/4"
R
R R
R1
R1 R1
Jointing
D D D
Flooring
49555 - Reverse Curve 49557 - Cove & Thumbnail 49559 - Ogee
Door
The broad curves of this ogee create a Cuts a small cove combined with a This bit cuts the classic reverse curve Making
wide, elegant table edge. Notice that the larger thumbnail. Works well when so popular on period furniture designs.
curve continues under the top slightly to combined with a molding under the top.
make a large tabletop appear thin.
Solid Surface
d Guide d
Bearing
Template
L Workpiece L
Router Bits
Industrial Quality
B 3/4" B 3/4"
R R
R1
D D
49561 - Ogee with Step 49563 - Thumbnail
Similar to the ogee edge, this Cuts a classic thumbnail
profile joins the classic ogee profile. It’s just right for
curve with a small “fillet” or step the edges of large tables
to add a bit more refinement. and chest lids.
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 109
d
With Ball Bearing Guide
Shape the sides of a handrail to make it both attractive and easy to grip. (Then
ease the top edges with the table edge bits shown on page 108.) Use in a
handheld or table-mounted router.
ØD R R1 B Ød L Tool No.
L
1-3/8 1/8 19/32 1-1/2 1/2 3-3/8
R B 1-1/4 3/8 1 1-1/2 1/2 3-3/8
1-1/4 3/8 1/2 1-1/2 1/2 3-3/8
R1
Replacement bearings: #54262 use #47706.
Replacement bearings: #’s 54268 & 54269 use #47716.
1:1 54268
D
R
L
R1
R
1:1 54269 D
54262 & 49550 54269 & 49550 54268 & 49550
L
R
B
54268 & 49556 54269 & 49556 54262 & 49556
R1
1:1 54262
Router Bits
54269 & 49554 54262 & 49554 54268 & 49554
Industrial Quality
54262 & 49560 54268 & 49560 54269 & 49560
(Wood profiles not shown at actual size.)
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188.
The dovetail joint is the strongest construction method for drawers, boxes, chests and fine casework. Amana designs the bits needed
by many router dovetail jigs that require cutting half-blind and through dovetails. We carry the bits for name brand dovetail jigs,
including Leigh,® Keller,™ Omnijig® and Incra.®
Sliding Dovetail Variable Spaced Dovetail Half-Blind Dovetail Through Dovetail
d
For the Keller™ Dovetail Templates and certain Incra® applications, 7° dovetail
bits are required. (Bits for the Keller™ system are supplied with shank-mounted
bearings.) This angle is also used in cutting stair stringers.
L
ØD B Ød L Application Tool No.
9/32 1/2 1/4 2-13/32 Porter-Cable® Jig 4212 *
11/32 3/8 1/4 2-1/8 Keller™ †
17/32 25/32 1/2 2-3/16 Porter-Cable® Jig 4210 & 4212 B
5/8 7/8 1/2 2-5/8 Incra®
3/4 7/8 1/2 2-5/8 Incra®
D
7/8 7/8 1/2 2-1/2 Stair Tread
† For Keller™ Dovetail jigs. Includes 5/8" dia. bearing. Replacement bearing #47712,
snap ring #47752.
* 6.24° Angle
45809 7°
45810 7°
45812 7°
1:1
7°
The 7-1/2° dovetail bit is used with both Omnijig® & the Incra® dovetail system.
Router Bits
Industrial Quality
ØD B Ød L Application Tool No.
1/4 5/16 1/4 2-1/2 Incra®/Omnijig® #43639
45820 7-1/2°
1:1
7-1/2°
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com
d
Dovetail
8° Angle • Carbide Tipped
Straight
Plunge These 8° dovetail bits are designed especially for use with the Leigh® Dovetail Jig.
ØD B Ød L Application Tool No.
.260 0.270 1/4 2-1/2 Leigh® #50 45824
L
Trimming 5/16 0.400 1/4 2-1/2 Leigh® #60 45825
3/8 0.532 1/4 2-3/8 Leigh® #70 45826
7/16 0.650 1/4 2-9/16 Leigh® #75 45827
B 1/2 0.825 1/4 2-3/4 Leigh® #80 45828
11/16 1.025 1/2 2-3/4 Leigh® #90 45829
Signmaking .80 1.275 1/2 3 Leigh® #100 45830
D 45830-LH
.80 1.275 1/2 3.272 Leigh® #100 *
* Left Hand Rotation
Grooving
45824 8°
Profiling
1:1
8°
Architectural
9° Angle • Carbide Tipped
Jointing The 9° dovetail bit is used for certain operations with the Incra® dovetail system.
45802 9° ØD B Ød L Tool No.
5/16 3/8 1/4 2-1/2 45822 *
Flooring 5/16 3/8 1/2 2-1/2 45823 *
1:1 3/8 3/8 1/4 2 45800
3/8 3/8 3/8 2 45801
3/8 3/8 1/2 2 45802
* Solid Carbide
Door
Making
Solid Surface
9°
10° Angle • Carbide Tipped
The 10° dovetail bit is used with the Incra® and Leigh® dovetail systems.
Router Bits
ØD B Ød L Application Tool No.
45805 10° 1/2 5/8 1/2 2-5/8 Incra® 45805
1:1
Industrial Quality
10°
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
112 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
Dovetail d
14° Angle • Carbide Tipped
Straight
The 14° dovetail bit is used with common half-blind dovetail jigs, as well as Plunge
with Omnijig®, Incra® and Leigh® jigs.
ØD B Ød L Application Tool No.
1/2 1/2 1/4 1-3/4 — 45804 L 45804 14°
Trimming
1/2 1/2 1/4 2 Incra®/Omnijig® 43705 45832
45816 14°
1/2 1/2 1/4 2-3/8 Leigh® #120 45833
1/2 .532 1/2 2-1/2 Incra /Omnijig® 43750
®
45806 B 45814 14°
17/32 1/2 1/4 2 Incra® 45834
1:1
3/4 3/4 1/2 3 Omnijig® 43774 45816 Signmaking
7/8 7/8 1/2 2-5/8 — 45818 D
1 1 1/2 2-3/4 — 45814
Grooving
18° Angle • Carbide Tipped Profiling
The 18° dovetail bit is used with the Leigh jig.® 45835 18°
ØD B Ød L Application Tool No.
1/2 .415 1/4 2-1/4 Leigh® #128 45835 1:1
Architectural
14° Butterfly spline d
Jointing
Carbide Tipped • 2 Flute
Cut butterfly keys, splines and inlays with this bit, which complements
the Amana Tool® 14° dovetail bits. Use in a table-mounted router.
Flooring
ØD B Ød L Tool No.
1-1/8 1-3/4 1/2 3-1/4 45860
Use with Amana Tool® 14° dovetail bits #’s 45804, 45806, 45814, 45816 or 45818. L
Door
B
Making
1:1
D Solid Surface
Template
14° Dovetail d
With Upper Ball Bearings
Carbide Tipped • 2 Flute
Router Bits
Industrial Quality
This dovetail bit has a shank-mounted ball bearing guide for routing dovetail 45850
slots following a template and pattern routing. The template must be mounted L
between the workpiece and the router. With a handheld router, the template 45852
must be on top of the workpiece. With a table-mounted router, the template 1:1
must be underneath the workpiece.
B Template
ØD B Ød L Type Tool No.
1/2 1/2 1/4 2-1/4 Dovetail 45850 * D
3/4 3/4 1/2 3 Dovetail 45852 † **
† For pattern cutting or jigs.
* Replacement bearing #47701. Replacement collar #47724.
** Replacement bearing #47721. Replacement collar #47739.
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 113
d
Dovetail
Straight
for BrookMan MaChines
Carbide Tipped • 2 Flute For Brookman Machines
Plunge
The following bit is specifically designed for use in Brookman machines:
L ØD a° B Ød L Tool No.
a°
Trimming 9/16 10° 1/2 3/8 BSF* 1-1/2 45839
B
* BSF = British Standard Fine
D
Signmaking
1:1
Grooving
d d 7° stairtreaD
Profiling Carbide Tipped • 2 Flute
Cut stair stringers for the treads using this bit. Available in right hand and left
hand rotation versions.
ØD Rotation B Ød L Tool No.
Architectural L L
3/4 Right Hand 7/8 1/2 2-5/8 45810
3/4 Left Hand 7/8 1/2 2-5/8 45810-LH
7/8 Right Hand 7/8 1/2 2-1/2 45812
B B 7/8 Left Hand 7/8 1/2 2-1/2 45812-LH
Jointing 1 Right Hand 7/8 1/2 2-1/2 45813
1 Left Hand 7/8 1/2 2-1/2 45813-LH
D D
Right Hand Left Hand
Flooring
45810 45812
Door
Making 1:1 1:1
Solid Surface
d
leiGh® JiG straiGht Bits
Carbide Tipped • 2 Flute
Straight bits required to cut pins for through dovetail using the Leigh® jig.
ØD B Ød L Application Tool No.
5/16 1.03 1/4 2-1/4 Leigh® #140 45270
L
1/2 1-1/4 1/2 3-1/8 Leigh® #160 45494
Router Bits
D
Industrial Quality
45270
1:1
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
114 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
keller™ Dovetail systeM d
Carbide Tipped
Straight
The popular Keller™ Templates require the use of straight and dovetail bits Plunge
with shank-mounted pilot bearings.
The following bits are specifically designed for use in the Keller™ system:
L
Straight Cutter W/Upper Ball Bearing Trimming
ØD B Ød L Keller™ No. Tool No.
.615 1/2 1/4 2-1/4 1641 45469 r ! 18 B
Straight
.615 3/4 1/4 2-5/8 1643/2443 45470 r ! 16 45479
.615 1/2 1/4 2-1/4 1641 45476 D 1:1
Signmaking
.615 3/4 1/4 2-1/2 1643/2443 45478
9/16 3/4 1/4 2-1/4 3032 45479
7° Dovetail Bit System W/Upper Ball Bearing Grooving
ØD B Ød L Keller™ No. Tool No.
11/32 3/8 1/4 2-1/4 1631/1531 45880
7/16 3/4 1/4 2-5/8 1633/1533 45882
5/8 1 3/8 2-5/8 2435 45884 Profiling
d
7° Keller ™ Set 1601 Pro Series & 1500 Journeyman
Standard Bit Set W/Upper Ball Bearing Template
ØD B Ød L Bearing Type Keller™ No. Tool No. Architectural
7/16 3/4 1/4 2-5/8 47712 Dovetail 1633 45882
5/8 3/4 1/4 2-5/8 47712 Straight 1643/1543 45470 r ! 16 L
7° Jointing
7° Dovetail – Small Bit Set W/Upper Ball Bearing 45880
ØD B Ød L Bearing Type Keller™ No. Tool No. B
11/32 3/8 1/4 2-1/4 47712 Dovetail 1631 45880 D 1:1
.615 1/2 1/4 2-1/4 47712 Straight 1641/1541 45469 Flooring
Template
7° Dovetail – Model 2401 Pro Series & 2200 Journeyman
W/Upper Ball Bearing
ØD B Ød L Bearing Type Keller™ No. Tool No.
5/8 1 3/8 2-5/8 47741 Dovetail 2435 45884 Door
7/8 1 3/8 2-5/8 47741 Straight 2445 45472 Making
7° Dovetail – Small Bit Set W/Upper Ball Bearing
ØD B Ød L Bearing Type Keller™ No. Tool No. Solid Surface
7/16 3/4 1/4 2-5/8 47741 Dovetail 2433 45888
5/8 3/4 1/4 2-5/8 47712 Straight 1643/2443/3643 45470
d
14° Dovetail – Model 3600 – Standard Bit Set W/Upper Ball
Bearing
ØD B Ød L Bearing Type Keller™ No. Tool No.
1 1 1/2 2-3/4 47738 Dovetail 3637 45890
Router Bits
Industrial Quality
Template
5/8 3/4 1/4 2-5/8 47712 Straight 1643/2443/3643 45470 r ! 16
7/8 1 3/8 2-5/8 47741 Straight 3645/2445 45472
L
14° Dovetail – Large Bit Set W/Upper Ball Bearing
ØD B Ød L Bearing Type Keller™ No. Tool No.
7/8 1-1/4 3/8 2-7/8 47741 Straight 3649 45473 B
14°
1:1 45890
Replacement bearing for #’s 45469, 45470, 45474, 45880 and 45882 is #47712. D
Replacement bearing for #45884 is #47741.
r
! Warning: Maximum RPM r
! 16 =16,000; r
! 18 =18,000
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 115
™
Finally, a slot cutter without shims, spacers and the need to disassemble the
bit. Just turn the dial and lock the setting, it’s that easy. The E-Z Dial™ adjusts
in just seconds and is accurate to .004." Cutting precise grooves has never
been easier.
ØD B C Ød L Tool No.
2-1/8 1/8 to 1/4 1/2 1/2 3-3/4
2-1/8 1/4 to 1/2 1/2 1/2 3-3/4
Replacement Bearing #47738. Screw #67110.
Each E-Z Dial™ Slot Cutter includes
Learn Step-by-Step with Master Craftsman Lonnie Bird
d d
Minimum Maximum
Cut Cut
L
B
B
C
1:1 55500 1:1 55510
D D
Router Bits
Industrial Quality
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188.
SLOTTING CUTTER d
ASSEMBLIES Straight
Carbide Tipped Plunge
Groove edges for T-moldings, splines or biscuits, and other purposes. Rout
tongue-and-groove joinery. Slotting cutters are available with either 2-wing or
3-wing cutters. Each assembly includes a cutter, bearing for a 1/2" deep cut,
and either a 1/4"-, 3/8"-, or 1/2"-shank arbor. Use in a handheld or table- L Trimming
mounted router.
B
General Specs:
ØD B C Ød L
C
1-7/8 Kerf (from 1/6 to 1/4) **1/2 1/4 or 1/2 2-3/8 Signmaking
1/4" Shank 1/4" Shank 1/2" Shank 1/2" Shank
2-Wing 3-Wing 2-Wing 3-Wing D
B Tool No. Tool No. Tool No. Tool No.
Grooving
1/16 53300 53400 53300-1 53400-1
5/64 53302 53402 53302-1 53402-1
3/32 53304 53404 53304-1 53404-1
1/8 53306 53406 53306-1 53406-1 Profiling
5/32* 53307 53407 53307-1 53407-1
3/16 53308 53408 53308-1 53408-1
7/32 53309 53409 53309-1 53409-1
1/4 53310 53410 53310-1 53410-1 Replacement
Bearing 47708 Architectural
Note: All above assemblies include cutter, arbor and ball bearing.
Also available with 3/8" shank by adding ‘-2’ to part #. (example: #53400-2).
* 5/32" size also used for ‘biscuit-joint’ cutting.
** See page 119 for ‘Vari-Depth’™ bearings (1/4" and 3/8" depth).
Jointing
Replacement Arbor Tool No.
1/4" Shank 47600 1/16"
3/8" Shank 47602
1/2" Shank 47604 5/64" Flooring
3/32"
1/8"
Door
5/32" Making
3/16"
Solid Surface
2 & 3 WING 7/32"
SLOTTING CUTTERS
Carbide Tipped
1/4"
Two- and three-wing slotting cutters are available individually. Use a two-wing
cutter for faster feed rates, three-wing cutters for better cut finish.
1:1
Router Bits
Industrial Quality
B Ød1 2 Wing 3 Wing 1/2
ØD Kerf Bore Tool No. Tool No.
1-7/8 1/16 5/16 53100 53200
1-7/8 5/64 5/16 53102 53202
D D
1-7/8 3/32 5/16 53104 53204
1-7/8 1/8 5/16 53106 53206
1-7/8 5/32 5/16 53107 53207 * d1 d1
1-7/8 3/16 5/16 53108 53208
1-7/8 7/32 5/16 53109 53209
1-7/8 1/4 5/16 53110 53210
* 5/32" size also used for ‘biscuit-joint’ cutting. See above for complete
assemblies including arbor and ball bearing guide. Arbor sold separately. 2-Wing 3-Wing
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 117
d ™
With Ball Bearing Guide
The Quadraset™ is an adjustable slotting assembly that includes 1/8," 5/32,"
3/16," & 1/4" two-wing cutters, a 1/2" shank arbor with a pilot bearing, and a
L
handful of spacers, washers and shims.
B
Conceptually it is like a table-saw dado stack set. You can use the cutters
individually on the arbor, or you can combine two, three or all of the cutters on
the arbor. Thus you can cut slots that range in widths from 1/8" up to 23/32" in
1/32" increments.
A
For different depth of cut, see Vari-Depth™ bearings on page 119.
D
ØD A B-Kerf Ød1 Ød L Tool No.
1-7/8 1/2 1/8 to 23/32* 5/16 1/2 3
Extra 5/32 two-wing cutter only.
53106
1/8" Replacement bearing #47708.
53107 Replacement arbor #47612.
5/32" * A full 3/4" cut can be achieved using one additional #53107 cutter
53108 (available separately).
3/16" Use in a table-mounted router.
53110
1/4"
Minimum Kerf 1/8"
d1 Tongue
Groove
D Maximum Kerf 23/32"
1:1
Combined Cutters
7/32" to 23/32"
(Increments of 1/32")
Individual Cutters
Create grooves 1/8" to 23/32" by 1/4," 3/16," 5/32," 1/8"
using up to four included cutters.
Router Bits
Wainscot doors can be a beautiful addition to an informal, country style kitchen;
their beaded panels are reminiscent of times long past. Constructing wainscot
doors is easy with Amana router bits. You’ll need just two bits: the Quadraset™
#53600 and the corner bead bit #54163.
For more information on how to Construct
Industrial Quality
a Wainscot door, please see page 152.
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188.
SLOT CUTTER ‘VARI-DEPTH’™ BEARINGS
Carbide Tipped
Straight
All standard Amana Tool® slotting assemblies (including the Quadraset,™ Plunge
Duo-Set,™ and box joint) make a 1/2" deep cut. Reduce the cut depth to
either 1/4" or 3/8" with Vari-Depth™ precision ball bearings fitted with
non-marring Delrin® sleeves.
‘C’ Depth of Cut I.D. O.D. Tool No. Trimming
1/4 5/16 1-3/8 47727
3/8 5/16 1-1/8 47728
C
Two piece set (#47727 & #47728) 47729 1/4" or 3/8"
Signmaking
Grooving
‘BOX JOINT’ SET d
With Ball Bearing Guide
Carbide Tipped • 3-Wing Profiling
Cut strong, attractive box joints for small boxes, shallow drawers and trays
with this bit. By taking three passes it can be used with stock up to 1/2" thick
and 4" wide. The most accurate way to adjust the height of the bit while
ensuring a good fit when taking multiple passes is to align a cutter on the bit
with one of the previous cuts. The bit has five uniformly spaced 3-wing slotting Architectural
cutters and a ball-bearing guide on a 1/2" shank arbor. Use in a table-mounted L
router for best results.
ØD B B1 Ød L Tool No. B Jointing
1-7/8 1-3/8 5/32 1/2 3-3/4 53610 r ! 13
r
! Warning: Maximum RPM r
! 13 =13,000
B
B11
Individual Components: Flooring
Description Order # D
5/32" 3-Wing Cutters (5 required) 53207
1/2" Shank Arbor With Nut 47620
Steel Ball Bearing Guide (1/2" depth of cut) 47708
5.5mm Spacers (4 required) 55369
1mm Spacers (2 required) 55402 Door
.5mm Shim (1 required) 55404 Making
Solid Surface
1:1
Router Bits
Industrial Quality
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 119
d
With Ball Bearing Guide
Ideal for joining wood end-to-end as well as edge-to-edge, the finger joint can
be routed quickly and accurately with this tool. Rout one workpiece face up, the
other face down. When the bit height is correct, the two pieces should slide
together with their faces perfectly flush. The assembly includes five 2-wing
finger cutters, one 2-wing straight cutter, a ball bearing guide, a 1/2" shank
L arbor, shims, spacers, and washers. The number of finger cutters used varies
with the stock thickness; it can handle stock between 7/16" and 1-3/8" thick.
Full instructions for setup and use are included. For best results run at full speed
B in a 1-1/2 horsepower table-mounted router.
ØD B Ød L Tool No.
1-9/16 1-3/8 1/2 3-3/4
D Individual Components Description Order #
Finger Cutter (5 required) 55394
Straight Cutter (1 required) 55396
Ball Bearing (5/6" x 28mm) 47736
1/2" Shank Arbor With Nut 47620
3.4mm Spacer (7 required) 55367
6.0mm Spacer (1 required) 55368
0.1mm Shim (10 required) 55357
0.5mm Shim (1 required) 55404 1:1
Counter Cut
Cut 1.0mm Washer (2 required) 55402
Each Finger Joint Assembly includes
Learn Step-by-Step with Master Craftsman Lonnie Bird
55-Finger
Finger ccuts
ts 11-3/16"
3/16" to 11-3/8"
3/8" Stock
d
Cut interlocking fingers for strong end-to-end or edge-to-edge glueups with this
simple bit. Setup is fast. Center the cut profile on the stock, then cut, alternating
the orientation of the show face – up when cutting one workpiece, down when
cutting its mate. Use in all CNC and table-mounted routers. For best results use
in a router table.
L
Router Bits
ØD B B1 a° C Ød L Tool No.
1-3/8 1-9/16 21/64 14° 5/16 1/2 3
B1
B
a°
Industrial Quality
C
D
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188.
RAISED PANEL ‘V’ JOINT d
Carbide Tipped
Straight
The principal benefit of this glue-joint bit is that the glue seam is far less Plunge
evident on the bevels of raised panels. Equally important, setup is fast. Cut one
half of each joint with the bit at any height. Simply raise or lower the bit 3/32"
before cutting the mates. As with all glue-joint bits, the cutter profile expands
the edge-to-edge glue surface, but more importantly, produces the precise
surface alignment that’s essential for fast glueups. For best results use in a Trimming
L
router table.
ØD B a° Ød L Tool No.
1-3/8 1-37/64 80° 1/2 3-1/16 45790 B
Signmaking
a°
D
Grooving
Profiling
Architectural
DRAWER LOCK d
Carbide Tipped • 2 Flute
Jointing
With this one bit, cut a lock joint that’s ideal for quick construction of strong
drawer boxes. Use in a table-mounted router only. The same bit setting is used
for both halves of the joint; adjust the fence position slightly to switch between L
sides and fronts/backs. The drawer front (or back) is laid flat on the tabletop and
fed across the cutter. The side is braced vertically against the fence and fed Flooring
across the cutter. You can use stock of any thickness and any composition and
produce flush or lipped drawers. For best results use in a table-mounted router. B
B1
D1
ØD ØD1 B B1 Ød L Tool No.
D
3/4 1/2 1/2 5/32 1/4 1-5/16 55386
1 23/32 1/2 5/32 1/2 1-5/16 55387 Door
Making
Solid Surface
1:1 55386 55387
1/2
Router Bits
Industrial Quality
Fence
Drawer Fence
Side
Drawer Front
Adjust bit height so that these
Drawer Slide dimensions are equal
Bit height is identical for both cuts. Fence position must be adjusted.
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 121
d
The lock miter is an interlocking edge-to-edge joint, typically used at the corners
of casework. Used in a table-mounted router, run at reduced speed, this bit cuts
both halves of the joint. The same setup of bit and fence cuts both parts. One
L part is laid flat on the tabletop and fed across the cutter. The second is braced
vertically against the fence and fed across the cutter. For best results use in a
table-mounted router.
B Material
ØD D1 B a° Ød L Size Tool No.
a°
1-1/2 12.1mm 1/2 45° 1/4 1-5/8 5/16-7/16
D1 1-5/8 13.2mm 5/8 45° 1/4 1-3/4 3/8-1/2
D
1-3/4 6.4mm 7/8 45° 1/2 2-1/8 3/8-3/4
2-11/16 9.2mm 1-3/16 45° 1/2 2-5/8 1/2-1-1/8 ! 18
! Maximum RPM
! 18 =18,000
Each 45° Lock Miter Cutter includes
Learn Step-by-Step with Master Craftsman Lonnie Bird
d d
Intended primarily for corner cabinetry, this two-bit set produces a 45° assembly.
One bit bevels & grooves the workpiece, the second bevels and forms a tiny
tongue on the mating edge. The set can be used in assembling any octagonal
L structure, from boxes & planters up to posts. Works on stock thicknesses
minimum 3/8" to max 3/4." For best results use the bits in a table-mounted
router, and adjust each to the same elevation. That is, measure from the tabletop
to the bit top when you make the cuts with the first bit, then set the second bit
B
to the same height.
a°
ØD B a° Ød L Tool No.
D D
1-15/32 7/8 22.5° 1/2 2-1/2
Router Bits
MAX.
MIN.
Industrial Quality
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188.
2 PIECE
EDGE BANDING SETS Straight
Carbide Tipped • 2 Flute Plunge
This two-piece bit set provides an economical way to create your own edge
banding from the wood of your choice. This is a great way to create a finished
edge on plywood or MDF panels and shelves which blends perfectly with the
rest of your project. Trimming
Using this bit set is simple, too. Just position each bit so that it is centered on
the stock thickness and make the cut. For the best results we recommend that
you cut the edge band stock slightly oversize and then flush trim it after
assembly.
This unique set is available in two styles: 90 degree or 60 degree. The 90 Signmaking
degree bits can also be used to create ‘V’ grooves or double-sided chamfers.
The 60 degree set creates a larger surface area for glue.
1/2" shank, two flutes, carbide tipped for long life. For stock 1/2" to 1" in
thickness. For use only in a table-mounted router. Grooving
ØD ØD1 B B1 a° a1° Ød L Tool No.
1-25/32 1-13/16 1-1/32 — 90° — 1/2 2-21/32 55466
1-19/32 1-45/64 1 5/32 30° 60° 1/2 2-5/8 55468 Profiling
Replacement bearing for #55466 use (2) #47720.
Replacement bearing for #55468 use (1) #47720 and (1) #47718.
d d Architectural
d d
Jointing
L L
a° Flooring
1°
aa1°
B B1 a° B a°
a1°
a1°
a°
Door
D D1 D D1 Making
Solid Surface
1:1 1:1
55468 55466
Router Bits
Industrial Quality
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 123
d
MULTI-SIDED GLUE JOINT/
Straight
BIRD’S-MOUTH
Plunge Carbide Tipped • 2 Flute
If you’re looking for a better way to construct multi-sided boxes, planters, and
columns, then look no further. With these bits, there’s no need for complex
miters and time-consuming set-ups. Instead, simply choose the bit based upon
L the number of sides on the box, rout the joint, and assemble. Unlike a miter
Trimming
joint, the joint created by these bits aligns itself. And the joint stays in alignment
while gluing; no more slipping and sliding out of position.
B
ØD B # Sides a° Ød L Tool No.
Signmaking 1-5/8 1-1/4 16 67.5°/22.5° 1/2 2-7/8 54270
a°
1-3/4 1-3/64 8 45°/45° 1/2 2-21/32 54272
D 1-7/8 1-1/4 6 or 12 60°/30° 1/2 2-7/8 54274
54270
d
Grooving d
Profiling
Flush
L
L
Architectural
a° B
B
a°
Ribbed
Jointing D D
54272 54274
54270 54272 54274
Flooring
1:1
Door
Making
Solid Surface
d
GLUE JOINT
Carbide Tipped • 2 Flute
The glue joint cut by this bit is strong and self-aligning. One setup produces both
halves of the joint. Adjust the bit so the center of its profile aligns with the stock
center. Cut one part face down, the mate face up. Bit works on stock between
L 5/8" and 1" in thickness. Must be used in a table-mounted router. Since there is
no guide bearing, use the router-table fence to control the cut.
Router Bits
ØD ØD1 B Ød L Tool No.
B
1-7/8 1-7/16 1-3/32 1/2 2-5/8 55388
D1
D
Industrial Quality
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
124 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
d d
With Ball Bearing Guide
Cut perfectly fitted tongue-and-groove joints on stock between 3/8" and 1-1/8"
thick with a table-mounted router and this assembly. The tool consists of an
arbor with an integral shank, two identical, removable slotting cutters, and a
L
pair of bearings. To cut tongues, sandwich one bearing between the two cutters
B1
(as in drawing A). To cut slots, mount one cutter between the two bearings (as
in drawing B). B t
B1
ØD B B1 C Ød t L Tool No.
1-5/8 3/4 1/4 3/8 1/2 1/4 3 + C
1-5/8 1-1/8 3/8 3/8 1/2 3/8 3-3/8 •
D
+ Can be used on 1/2" through 3/4" thick material.
• Can be used on 3/4" through 1-1/8" thick material.
Tongue is cut as shown in assembly ‘A’.
For groove cut, reassemble the tool as shown in assembly ‘B’.
Instructions included.
1:1 55400
1:1 55401
Each set contains two complete tongue & groove assemblies, one to cut tongues,
one to cut slots. 1:1 55408
ØD B B1 C Ød t L Tool No. 1:1 55407
1-5/8 17/32 13/64 3/8 1/2 1/8 3
1-7/8 3/4 1/4 1/2 1/2 1/4 3
Each Tongue & Groove Assembly includes
Learn Step-by-Step with Master Craftsman Lonnie Bird
Description Order #
1/4" Kerf Cutters (2 required) for Tool #55400
3/8" Kerf Cutters (2 required) for Tool #55401
1/2" Shank Arbor With Nut For Tool #55400
1/2" Shank Arbor With Nut For Tool #55401
Ball Bearing Guide (2 required)
.05mm Shims (3 required)
.10mm Shims (3 required)
1mm Black Washer
6mm Steel Spacer
Router Bits
Industrial Quality
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com
d d
WEDGE TONGUE & GROOVE
Carbide Tipped • 2 Flute
Straight
Plunge The tongue-and-groove joint cut by this two-bit set can be used for applications
as diverse as assembling broad tabletops and other panels and making strip
flooring. Use it on stock from 5/8" through 1-1/4" thick. The bits are available
individually or as a two-piece set. Use in a table-mounted router.
L
Trimming
a° ØD ØD1 a° B B1 Ød L Description Tool No.
1-1/4 9/16 15° 1-1/4 1/4 1/2 2-3/4 Wedge Groove 55410
B1 a° B1 B 1-1/4 9/16 15° 1-1/4 7/16 1/2 2-3/4 Wedge Tongue 55412
Complete Wedge T & G (2 piece set) 55414
Signmaking
D1 D1
D D
Grooving
Profiling
Architectural 1:1 55410 1:1 55412
Jointing
Flooring d d
OGEE WINDOW SASH & RAIL
With Ball Bearing Guide
Carbide Tipped • 2 Flute
This reversible assembly is designed to cut window sash and glass door parts,
L including rails, stiles, mullions, and muntins, on stock between 1-1/8" and
Door 1-3/4" thick. Assembly includes an ogee profile cutter, a rabbet cutter, one
Making R bearing, a 1/2" shank arbor, spacers, shims, and washers. Configure as shown
B1 in the drawing to cut profile and rabbet on all parts. Switch bearing and profile
L B1 B
B2 B2 cutter and replace rabbet cutter with spacers to rout the copes. Use in a table-
mounted router.
R D
Solid Surface
B 55341 ØD R ‘A’ Reveal B B1 B2 B3 Ød L Tool No
1-3/8 1/8 1/4 1-13/16 5/16 5/8 7/8 1/2 3-3/4 55340
B3 d 1-3/8 1/8 — 21/32 1/16 27/64 — 1/2 2-1/8 55341
1-9/64 1/8 — 43/64 5/16 — — 1/2 2-1/8 55343
D Each Ogee Window Sash & Rail Cutter includes
55340
Full Color Instruction Manual
Router Bits
Learn Step-by-Step with Master Craftsman Lonnie Bird
L
R
B
B1
A
Industrial Quality
D
55343
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
126 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
BEAD AND ‘V’ d
PANELING ASSEMBLY Straight
With Ball Bearing Guide Plunge
Carbide Tipped • 2-Wing
These assemblies are designed to cut tongue & groove joinery for solid wood
paneling. Two patterns, a 1/4" bead (#55330) or a 45° ‘V’ (#55320), are L
available individually or as a set. Each assembly comprises a profile cutter, Trimming
a rabbet cutter and a groove cutter, two different-size bearings, a 1/2" shank
a°
arbor, and a selection of washers, shims and spacers. Assemble the profile
B
cutter, small bearing, and rabbet cutter as shown in the solid drawing to cut
the tongue. To rout the groove, mount the groover and large bearing with the
profiler, as shown in the ghosted drawing. The tool will work with stock from Signmaking
1/2" through 1" thick.
D1
ØD ØD1 R a° B Ød L Type Tool No. D
1-13/16 1-5/16 — 45° 1/2 to 1-3/16 1/2 3-1/8 ‘V’ 55320 ‘V’ Grooving
1-15/16 1-5/16 1/4 — 1/2 to 1-3/16 1/2 3-1/8 Bead 55330
d
Profiling
L Architectural
1:1 55320 1:1 55330
R
B
Jointing
D1
D Flooring
Bead
Door
Making
d d
Solid Surface
ADJUSTABLE ‘V’ PANEL SET
Carbide Tipped • 2 Flute
This assembly is designed to create attractive ‘V’ groove paneling. Included in
this set are spacers to produce ‘V’ paneling from 1/2," 3/4" or 1" thick stock.
ØD ØD1 B B1 Ød L Tool No.
1-11/64 1-37/64 1-1/8 5/32 to 5/16 1/2 3-3/8 55346
Router Bits
Industrial Quality
L
B
B1 B1
1"
3/4"
1/2"
D1 D1
1:1 1:1 1:1
D D
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 127
Straight
Plunge
Trimming
Signmaking
Grooving
Profiling
SOLID WOOD TONGUE AND GROOVE FLOORING SETS
With Nail Slot
Carbide Tipped • 2 Flute
Architectural Build your own wood floor with the wood of your choice! Amana Tool® now has the solution for this task. Set #55456 was
designed for 5/8" to 3/4" stock thickness, while set #55454 is for 1/2" to 5/8" stock thickness.
Material Size ØD ØD1 a° a1° R R1 T C C1 B d L Tool No.
Jointing 1/2 to 5/8 1-1/4 15/16 45° 60° — — 13/64 .163 .197 3/4 1/2 2-3/4 55454
5/8 to 3/4 1-13/64 1 45° — 1/8 1/16 1/4 1/4 — 15/16 1/2 2-7/8 55456
Replacement bearing #47706.
Flooring d #55454 d d #55456 d
Door
Making L L L L
a1˚ a˚
T B R
T B R T B T B
a˚
Solid Surface R1
C C1
D D1 C C
D D1
55454 55456
1:1
Router Bits
1:1
Industrial Quality
Tongue & Groove Shaper Cutters for Custom Wood Flooring
See page 292.
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
128 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
d d
With Upper Ball Bearing
L
L
This bit is essentially a plunge-cutting straight with a shank-mounted ball-
bearing pilot. It is a versatile bit, useful for template/pattern routing of parts, B
joints, and internal cuts, and can be used in handheld and table-mounted
D B
routers. The template is attached to the workpiece, and the pilot bearing 45460-S
rides along its edge as the cutting edges rout the workpiece, forming an D
exact duplicate of the template. With a handheld router, the pattern is on top 47174
of the work; with a table-mounted router, the pattern is underneath the work.
Replacement
ØD B Ød L Bearing Collar Tool No.
1/2 3/8 1/4 2-1/4 47701 47724 *
1/2 1/4 1/4 1-5/8 47701 47724
1/2 1/2 1/4 1-15/16 47706 — †
1/2 1/2 1/4 2 47701 47724
1/2 3/4 1/4 2-1/4 47701 47724
* For use on hardwood & flooring medallions. See page 33 for additional
flooring bits.
† Replaces Ocemco TA-170. See page 38 for more info.
d
For “Undercutting”
L
These bits are designed for slotting wood flooring, inlays and medallions.
C
Replacement
B
ØD C B Ød L Bearing Collar Tool No.
D
.894 5mm 4.5mm 1/4 2-1/4 47701 47724
1-1/4 3/8 1/4 1/4 1-7/8 47701 47724 45663 45672 45674 45668 45669
1-1/4 1/4 1/4 1/4 1-7/8 47714 47724
1-1/8 1/4 1/8 1/4 1-7/8 47712 47724
1-1/4 3/16 5/32 1/4 1-7/8 47708 47724 1:1
d
Replacement
L
ØD R C B Ød L Bearing Collar Tool No.
1-1/4 1/8 3/8 1/4 1/4 1-7/8 47701 47724 45676 45678
R C
1-1/4 1/8 5/16 1/4 1/4 1-7/8 47712 47724
Router Bits
Industrial Quality
B
See page 36 for upper bearing bits used in flooring industry. 1:1
For medallion inserts (#45481, #45460-S, #45462-S, #45464-S). D
Visit www.timberline-amana.com
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com
• Adjust the panel groove width (3/16" to 9/32" for 1/4" plywood), (7/16" to 17/32"
for 1/2" plywood).
• Cuts frame stock from 5/8" through 1-1/4" thickness.
• Designed to cut precise grooves to provide undersized plywood veneered panels
with a snug rattle-free fit.
• Each set includes 2 pcs. (1 for stile cuts & 1 for rail cuts & shims).
See Page 326
for Instile & Rail System™
Adjustable Tongue & Groove
Insert Shaper Cutter Set.
Shim Set
Router Bits
7/16" to 17/32" for 1/2" plywood 3/16" to 9/32" for 1/4" plywood
panel (1-1/4" doors) panel (3/4" doors)
Each Instile & Rail System™ includes
Industrial Quality
Learn Step-by-Step wit
with Master Craftsman Lonnie Bird
www.amanatool.com/instile
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188.
FLAT PANEL STILE & RAIL SETS With Ball Bearing Guide
Carbide Tipped
Straight
5/8" to 1-1/4" Material Plunge
Bits in these sets have profile and groove or rabbet cutters and ball-bearing guide mounted on a 1/2" shank. Respacing of the components
should only be necessary – using the provided shims – after the cutters have been resharpened. Guide straight cuts with the fence; use the
pilot bearing only for cuts on curved rails or stiles.
Trimming
ØD R a° B to B1 C Ød L Type Tool No.
1-5/8 5/32 — 5/8 to 1-1/4 3/8 1/2 3-11/32 Concave 55433
1-5/8 1/4 — 5/8 to 1-1/4 3/8 1/2 3-11/32 Ogee 55436
1-5/8 3/16 — 5/8 to 1-1/4 3/8 1/2 3-11/32 Bead 55437
1-5/8 — — 5/8 to 1-1/4 3/8 1/2 3-11/32 Mission (Straight) 55438 Signmaking
1-7/8 — — 5/8 to 1-1/4 1/2 1/2 3-11/32 Mission (Straight) 55439
1-7/8 — 18° 5/8 to 1-1/4 1/2 1/2 3-11/32 Straight with Bevel 55432
d d d d Grooving
Concave Ogee
55433 55436
Min Min
Profiling
1:1 1:1
L
L
B B
R R Architectural
B
B11 B1
B1
Max Max
C C
Jointing
1:1 1:1
D D D D
d d d d Flooring
Bead Mission
55437 Style Min
Min (Straight)
1:1 55438 1:1
Door
L L Making
B
R
B
B11 B1
B1 B
Max Solid Surface
Max
C C
D D 1:1 1:1
D D
d d d d
Straight a° Mission
Router Bits
Industrial Quality
w/Bevel Min Style Min
55432 (Straight)
1:1 Extra Deep 1:1
55439
L a° L
B B
B
B11 B1
B1
Max Max
C C
1:1 D D 1:1
D D
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 131
Set includes unique adjustment system
• Designed to cut precise grooves to provide undersized plywood veneered
panels with a snug rattle-free fit.
• Each set includes 2 pcs. (1 for stile cuts & 1 for rail cuts).
ØD B Ød C T L Max. RPM Tool No.
2-3/8 1-3/16 1/2 3/8 6.1mm to 6.6mm(1/4±) 2-15/16 18,000
Replacement knives sold individually (2 replacement knives required per bit).
d d
L
C
T B T
D D
6.1mm to 6.6mm (1/4±) Panel Groove
See Page 296 for
Instile & Rail System™ Tongue
& Groove Shaper Cutters Sets.
1-3/16"
Max. 3/8"
Min.
See Page 326 for
1:1 1:1 Instile & Rail System™
Tongue & Groove Insert Carbide
RCK-330 RCK-332 Shaper Cutter Set.
Router Bits
5.4mm to 6.0mm Panel Groove
• For 5.5mm undersized 1/4"
plywood.
• For 5.9mm oversized 1/4"
1-3/16"
Industrial Quality
veneered plywood. 3/8"
Top View
RCK-334 RCK-336
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188.
2-PIECE STILE & RAIL SETS d d
With Ball Bearing Guide Concave/
Convex Straight
Carbide Tipped • 2-Wing Plunge
55421
Our stile and rail sets give you two complete bits, one for doing the rail cuts,
one for the stiles. Make cabinet doors and all varieties of frame-and-panel
assemblies for furniture and architectural applications. These sets are offered L R
in two configurations, one for working material up to 1" thick, the other for Trimming
material between 5/8" and 7/8" in thickness. The same three profiles are B
available in either configuration. B1
B1
3/4" Material
Bits in this set have profile and groove or rabbet cutters and ball-bearing Signmaking
guide mounted on a 1/2" shank. Respacing of the components should only D D
be necessary – using the provided shims – after the cutters have been
resharpened. Use in a table-mounted router. Guide straight cuts with the
fence; use the pilot bearing only for cuts on curved rails or stiles. Grooving
ØD R B B1 Ød L Type Tool No.
1-5/8 1/4 11/16 1/4 1/2 3-1/8 Concave 55421
1-5/8 1/4 11/16 1/4 1/2 3-1/8 Ogee 55431 Profiling
1-5/8 3/16 11/16 1/4 1/2 3-1/8 Bead 55441 1:1
Complete listing of replacement parts can be found online at www.amanatool.com
Architectural
Jointing
Flooring
d d d d
Ogee Bead
55431 55441
Door
Making
L R L R
B B
B1 B1
Solid Surface
D D D D Router Bits
Industrial Quality
1:1 1:1
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 133
d d 2-PIECE STILE & RAIL SETS
Concave/ With Ball Bearing Guide
Straight Convex
Plunge 55420
Carbide Tipped • 2-Wing • 3/4" to 1" Material
In addition to the components provided with sets of the first type, these sets
include two trim cutters for stock 7/8" through 1" in thickness. (These trim
cutters can be removed for making bearing-guided cuts on stock under 7/8"
Trimming thick.) Use in a table-mounted router. Guide straight cuts with the fence, setting
L
it tangent to the trim cutters. Use the pilot bearing only for cuts on curved rails
R or stiles; for cuts on curved parts 7/8" to 1" thick, a template must to used.
B1 B
ØD R B B1 Ød L Type Tool No.
Signmaking 1-5/8 1/4 1-1/16 1/4 1/2 3-5/16 Concave 55420
1-5/8 1/4 1-1/16 1/4 1/2 3-5/16 Ogee 55430
1-5/8 3/16 1-1/16 1/4 1/2 3-5/16 Bead 55440
D D
Individual Components: Qty. Required for Tool No.
Grooving Description 55420 55430 55440 Order #
Concave Profile Cutter 1 — — 55422
Concave Cope Cutter 1 — — 55424
Ogee Profile Cutter — 1 — 55352
Profiling Ogee Cope Cutter — 1 1 55434
Bead Profile Cutter — — 1 55442
Bead Cope Cutter — — 1 55444
1:1 .250" Groove Cutter 1 1 1 55354
.300" Trim Cutter (.865" dia.) 1 1 1 55448
Architectural .433" Trim Cutter (.865" dia.) 1 1 1 55450
.400" Rabbet Cutter (1.615" dia.) 1 1 1 55452
.865" Ball Bearing 2 2 2 47708
1/2" Shank Arbor With Nut 2 2 2 47622
.002" Shims 4 4 4 55356
Jointing .040" Shims 4 4 4 55402
.004" Shims 4 4 4 55357
3.6mm Spacers 4 4 4 55367
Flooring d d d d
Ogee Bead
55430 55440
Door
Making
L L
R R
B1 B B1 B
Solid Surface
D D D D
Router Bits
1:1 1:1
Industrial Quality
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
134 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
REVERSIbLE STILE d d
& RAIL ASSEMbLIES Ogee
Straight
55350
With Ball Bearing Guide Plunge
Carbide Tipped • 2-Wing • 3/4" Material
Cut both the stiles and rails with a single economical assembly. Switch from the
stile cut to the rail cut simply by rearranging the cutters and bearing on the L
arbor. Because the profile and the cope are cut with the same cutter, you get a Trimming
perfect fit. The assembly order for each setup is shown in the drawing. Use in a
B
table-mounted router. Guide straight cuts with the fence; use the pilot bearing B1
only for cuts on curved rails or stiles.
Pattern 'A' A Signmaking
ØD Type Reveal B B1 Ød L Tool No.
D D
1-5/8 Ogee 3/8 11/16 7/8 1/2 3 55350
1-5/8 Traditional 3/8 11/16 7/8 1/2 3 55370
1-5/8 Classical 3/8 11/16 7/8 1/2 3 55380 Grooving
Note: Stile & Rail assemblies can be used on 5/8" through 7/8" material.
Tongue & Groove can be used on 1/2" through 3/4" material.
Profiling
1:1 55350
Architectural
Jointing
Flooring
d d d d
Traditional Classical
55370 55380
Door
Making
L L
B B1 B
B1 Solid Surface
A A
D D D D Router Bits
Industrial Quality
1:1 55370 1:1 55380
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 135
INSERT CARbIDE
Straight
STILE & RAIL SET
Plunge For 3/4" To 1-3/16" Material
Our stile and rail sets give you two complete bits, one for doing the rail cuts and
one for the stiles. Make cabinet doors and all varieties of frame-and-panel
assemblies for furniture and architectural applications.
Trimming 1:1
ØD B B1 R Ød C L Max. RPM Tool No.
2-5/8 1-11/64 1/4 1/4 1/2 3/8 3-1/8 18,000 RC-1130 *
* Set comes with Ogee Knives installed (RCK-215 & RCK-216)
Signmaking
d d
Grooving
Ogee Knives Included
29/32" 29/32"
3/8" 3/8"
Profiling L
R
1 3/16"
3/4"
1/4"
B1 B
Architectural
3/16"
C
RCK-215 RCK-216 D D
Jointing
Additional knives sold separately.
Flooring
Ogee Fillet Classical
Door
Making
RCK-211 RCK-212 RCK-213 RCK-214
Solid Surface
Traditional Concave Convex
Router Bits
RCK-217 RCK-218 RCK-219 RCK-221
Industrial Quality
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
136 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
These one piece stile & rail bits are an easy and effective technique for creating
cabinet door frames. You simply adjust the height of the bit accordingly in the
router table to cut the profile cut (with bit lowered in the table) and the cope cut
(with bit raised in the table).
ØD ØD1 R B B1 Ød L Tool No.
2 1-1/4 7/32 1-9/32 15/64 1/2 4-3/32
2 1-1/4 7/32 1-9/32 15/64 1/2 4-3/32
2 1-1/4 9/32 1-9/32 15/64 1/2 4-3/32
Replacement bearing #47744 (2 required).
Replacement nut #67131.
Replacement washer #67125.
d d d
R R R
L
B1 L B1 L B1
B B B
D1 D1 D1
D D D
1:1 55460 1:1 55462 1:1 55464
Router Bits
Industrial Quality
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com
CAbINET DOOR & DRAW EDGE
Straight
FRONT FACE EDGE
Plunge Carbide Tipped • 2 Flute
Cuts a decorative edge on cabinet fronts.
Shallow design will also work well with European hinges.
Trimming ØD ØD1 R R1 R2 B C Ød L Tool No.
1-1/4 1/2 5/64 — — 3/8 — 1/2 1-7/8 49530
15/16 — 9/64 — — 1/4 — 1/4 1-5/8 49532
1-1/4 — 7/32 9/64 — — 3/8 1/2 1-15/16 49534
1-5/8 1/2 1/8 11/32 — 7/16 — 1/2 2-19/16 49535
Signmaking 1-3/4 1/2 1/8 17/32 3.32mm 7/16 — 1/2 2-1/4 49536
1-3/4 1/2 1/8 31/64 — 7/16 — 1/2 2-1/4 49537
1-3/4 1/2 3/32 1/4 17/64 7/16 — 1/2 2-9/32 49538
Replacement bearing #47706.
Grooving
Profiling d d
d d
Architectural L L
L L
B B
B R1 R1
B R R
Jointing R 20˚
R
D1 C D1
D D D D
Flooring
R1 R1
R R
1:1 49530 1:1 49532 1:1 49534 1:1 49535
Door
Making
d d d
Solid Surface
L L L
R2 B B B
R1 R1 R2 R1
R R R
Router Bits
D1 D1 D1
D D D
R2 R1 R2
R1 R1
R
Industrial Quality
R R
1:1 49536 1:1 49537 1:1 49538
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
138 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
d
CNC
USE ONLY
This innovative cutter is part of our patent pending Nova System (see pages 82–83).
The hard, durable carbide blades provide durability, even on abrasive sheet stock.
And because the profiles are interchangeable, you’ll only need to purchase one bit.
Choose from a wide variety of popular profiles illustrated below.
ØD B Ød L L1 Max RPM Tool No.
40mm 17.5mm 3/4 110.5mm 2.5mm 28,000 * L
(1-1/2) (11/16) (4-3/8) (3/32)
* NRC-A13 included.
B
L1
D
Includes both concave and
convex knife retainers.
Concave Convex
1:1 NRC-A13*
For use with #RC-2470 cutter (above).
NRC-A01 NRC-A02 1:1 NRC-A03 NRC-A04 NRC-A05 NRC-A06 NRC-A07 1:1 NRC-A08 NRC-A10 1:1
Router Bits
Industrial Quality
NRC-A11 NRC-A12 NRC-A13 1:1 NRC-A14 NRC-A15 NRC-A16 1:1 NRC-A17 1:1
NRC-A18 NRC-A19 1:1 NRC-A20 1:1 NRC-A21 1:1 NRC-A22 NRC-A23 1:1
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com
Straight
Plunge
Trimming
Signmaking
Grooving
RAISED PANEL
Profiling With Ball Bearing Guide
d
Carbide Tipped • 2 Flute
Create raised panels for cabinet doors, frame-and-panel furniture, and
architectural paneling with a raised-panel bit. The cutter forms a fillet to
delineate the raised field, a shaped band around the field, and an integral tongue
Architectural
to fit the panel groove in the frame members. The profile contour and the reveal
width varies. All tools have 1/2" shanks. Must be used in a table-mounted
L
3+ horsepower router and run at reduced speed. Use these bits for panels
with curved edges. Multiple passes recommended.
Jointing
B
R
R1 Architectural
R2
ØD *‘A’ Reveal R R1 R2 B Ød L Tool No.
Flooring A
D 3-9/16 *1-17/32 5/32 1-23/32 57/64 1/2 1/2 2-1/4 54113
54113 Replacement bearing #47706.
d
Door
Making 1:1 54113
L Traditional
Solid Surface
ØD *‘A’ Reveal a° B B1 Ød L Tool No.
B 1-5/8 *9/16 25° 1/2 — 1/2 2-3/8 54116
a°
3-3/8 *1-7/16 15° 1/2 5/16 1/2 2-3/8 54117 r ! 14
Replacement bearing #47706.
D r
! Warning: Maximum RPM r
! 14 =14,000
54116
‘A’
d
Router Bits
1:1 54116
L ‘A’
Industrial Quality
B
a˚ B1
1:1 54117
D
54117
* Note: Reveal (‘A’) on all tools shown above, reflects the total length of cut. Therefore,
you must deduct 3/8" (usually) for allowing the panel to recess into the frame.
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
140 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
d
Cove
Straight
ØD *‘A’ Reveal R B Ød L Tool No. Plunge
3-3/8 *1-7/16 1-9/16 1/2 1/2 2-3/8 54119 r ! 14
Replacement bearing #47706. L
r
! Warning: Maximum RPM r
! 14 =14,000
Trimming
B
‘A’
R
D
Signmaking
1:1
d Grooving
Ogee
ØD *‘A’ Reveal R B B1 Ød L Tool No.
2-5/8 *1-1/16 3/4 5/8 5/16 1/2 2-1/2 54118 r ! 20
Profiling
3-3/8 *1-7/16 7/8 9/16 3/8 1/2 2-1/2 54121 r ! 14
Replacement bearing #47706.
L
r
! Warning: Maximum RPM r
! 14 =14,000; r
! 20 =20,000
‘A’ B Architectural
B1
‘A’
R
R
D
Jointing
1:1 54118 54121
Flooring
bUILDING A RAISED PANEL DOOR
WITH LONNIE bIRD - #DVD-01-07
Master craftsman Lonnie Bird demonstrates the steps to construct a raised
panel cabinet door using Amana Tool® router bits. All the important topics are
covered including: Types of router bits, Stock preparation, Shaping the cope, Door
Routing the profile, Shaping the panel and Assembly & Safety tips. Making
To order online – http://www.amanatool.com/Lonnie_Bird.html
RAISED PANEL bACK CUTTER d Solid Surface
Carbide Tipped • 2 Flute
Designed to cut back side of raised panels for a flush alignment with door
frames. This cutter can be used with any of our raised panel router bits found
on pages 140 and 141. L
ØD *‘A’ Reveal R B Ød L Tool No.
54278
Router Bits
Industrial Quality
1-3/4 5/8 1/4 7/16 1/2 2-1/16
B
Replacement bearing #47706.
R
‘A’
* Note: Reveal (‘A’) on all tools shown above, reflects the total length of cut. Therefore,
you must deduct 3/8" (usually) for allowing the panel to recess into the frame.
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 141
d
RAISED PANEL
With Back Cutter
Straight
Plunge Carbide Tipped • 2 Flute With Ball Bearing Guide
Raised panels fit standard panel grooves, even when the panel thickness
exceeds 5/8." As the main cutter raises the front of the panel, the back cutter
mills the back to produce a standard-thickness tongue around the panel. Each
L
Trimming tool is supplied with two different guide bearings, enabling you to stage cuts
B1 on curved edges effectively and safely. All tools have 1/2" shanks. Must be
a°
B used in a table-mounted 3+ horsepower router and run at reduced speed.
R
Multiple passes recommended.
Signmaking Traditional
‘A’* **
D1 ØD ØD1 Reveal ‘A1’ a° R B B1 Ød L Tool No.
D 3-3/8 2-1/8 1-3/8 1-1/16 15° 5/16 1-1/16 1/2 1/2 2-15/16 54227 tr ! 12
Grooving
‘A’ Bearing
#47713
‘A1’
Bearing
#47763
Profiling
1:1
Architectural
d
Ogee
‘A’* **
ØD ØD1 Reveal ‘A1’ R R1 B B1 Ød L Tool No.
Jointing
3-3/8 2-1/8 1-3/8 1-1/16 7/8 5/16 1-3/16 5/8 1/2 3-1/16 54221 tr ! 12
‘A’ Bearing
L #47713
Flooring ‘A1’ Bearing
B1
#47763
R B
R1
Door 1:1
Making
D1
D
Cove
‘A’* **
Solid Surface ØD ØD1 Reveal ‘A1’ R R1 B B1 Ød L Tool No.
3-3/8 2-1/8 1-3/8 1-1/16 1-9/16 5/16 1-1/16 1/2 1/2 2-15/16 54229 tr
d ! 12
Bearing
‘A’
#47713
‘A1’ Bearing
#47763
L
Router Bits
B1
R B
1:1
R1
* Note: Reveal (‘A’) on all tools shown above, reflects the total length of cut. Therefore,
Industrial Quality
you must deduct 3/8" (usually) for allowing the panel to recess into the frame.
D1 ** Note: To receive (‘A1’) use bearing #47713. Bearing included with tool.
D Replacement bearing #47713 (8mm x 16mm) and #47763 (8mm x 1-1/4").
Back Cutter #55435 = 1/4" Kerf; 5/16" Radius Cutter.
r
! Warning: Maximum RPM r
! 12 =12,000
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
142 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
ARCHITECTURAL DOOR
With Ball Bearing Guide
Straight
Carbide Tipped • 2 Flute Plunge
ØD B B1 R R1 R2 C A T Ød L L1 Type Tool No.
1-15/32 1 55/64 1/4 5/64 — 1/2 — 7/32 1/2 2-1/2 2-15/64 Stile & Rail Set 55428
3-9/16 1/2 — 5/32 1-23/32 57/64 — 1-17/32 — 1/2 2-1/4 — Raised Panel 54113 Trimming
1-1/4 7/16 — 7/32 9/64 — — — — 1/2 1-15/16 — Door Edge 49534
Replacement bearing #47706.
Signmaking
Classical Raised
Panel #54113 Grooving
Profiling
Stile & Rail
#55428
Door Edge Architectural
#49534
d d Jointing
Flooring
L L1
R
R
B1 B
T R1 T
R1 Door
1:1 55428 Making
C C
D D
Solid Surface
d d
L
L
Router Bits
Industrial Quality
B
R1
B R
R
R1
R2
C
A D
D
R1
R
1:1 54113 1:1 49534
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 143
d
Insert Raised panel bits for CNC machine or router table. Bits include ball bearing
L
& anti-dust plug. May also be used with optional back cutter below.
Repl. T.C.
B
ØD B Ød R A L Type Knife Tool No.
R
3-3/8 3/4 1/2 7/8 1-3/8 2-3/4 Ogee RCK-226
A 3-3/8 27/32 1/2 1-37/64 1-7/16 2-7/8 Cove RCK-228
D
All above insert raised panel bits include plug, ball bearing and retaining screw.
RC-4012
Replacement bearing #47706.
1:1 RC-4012
1:1 RC-4014
RC-4014
(Optional)
R
B
ØD B R Repl. T.C. Knife Tool No.
D 2-1/8 23/64 5/16 RCK-232
1:1
Router Bits
Industrial Quality
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188.
CNC d
USE ONLY
Insert profile router bit with two cutting flutes. Suitable for producing various raised panel
profiles in softwood, hardwood and man-made boards. Tool can be supplied complete with
a small trimmer for machining the edge of the panel. One router will take all eight different
profiles. For use on routers and machining centers with CNC control.
L
Max Repl. T.C.
ØD ØD1 B Ød L RPM Knife Tool No.
112mm(4-7/16) 18mm(23/32) 28mm(1-1/8) 3/4 110mm(4-11/32) 12,000 RCK-200
112mm(4-7/16) 18mm(23/32) 28mm(1-1/8) 3/4 110mm(4-11/32) 12,000 RCK-210 B
112mm(4-7/16) 18mm(23/32) 28mm(1-1/8) 3/4 110mm(4-11/32) 12,000 RCK-220
112mm(4-7/16) 18mm(23/32) 28mm(1-1/8) 3/4 110mm(4-11/32) 12,000 RCK-230
D1
112mm(4-7/16) 18mm(23/32) 28mm(1-1/8) 3/4 110mm(4-11/32) 12,000 RCK-260
D
(Optional)
Repl. T.C.
ØD1 B B1 Ød L Knife Tool No.
18mm(23/32) 12mm(15/32) 18mm(23/32) 8mm(5/16) 31mm(1-1/4) AMA-12
RC-4100
(Wood profiles not shown at actual size.)
max. 14
47.5 47.5 47.5
max. 15
max. 15
R30 R70
11 9.5 5.5
12.4
12.3
14
18
Router Bits
Industrial Quality
RCK-200 RCK-210 RCK-220
47.5
max. 8.5
6 47.5
max. 14
3 9
5.5
R8
6.2
R3.5
9.5 R3
12 R3.5
1
9.8
8.6
15 15
RCK-230 RCK-260
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com
Raised panels with a low-horsepower, fixed speed router using these
patented VERTICAL raised panel bits. You must do the work on a router table,
with the work on edge, braced against the fence. Arched or curved shapes
(i.e.: “cathedral” door panels) cannot be routed. To prolong tool life and get
the best cut finish, several passes are recommended.
ØD ØD1 B a° R1 R2 R3 Ød L Type Tool No.
1-3/16 7/16 1-5/8 — 7/8 23/32 — 1/2 3-1/8 Ogee
1-1/8 9/32 1-5/8 — 1-9/16 — — 1/2 3-1/8 Cove
1-3/16 3/16 1-5/8 — 7/8 23/32 1/8 1/2 3-1/8 Ogee w/Bead
1-1/8 19/32 1-5/8 15° — — — 1/2 3-1/8 Traditional
d d
54520 54524
L L
B B
R1
R1
R2
D1 D1
1:1 1:1 D
D
d d
54532
54528
L L
B B
R1
R2 a°
R3
D1 D1
1:1 D 1:1 D
Router Bits
Industrial Quality
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188.
CNC
USE ONLY
For MDF Cabinet Doors
W = width of the frame.
H = maximum depth of the frame.
The dimension W determines the frame width.
The dimension H determines the profile depth.
In the example shown, W = 50 and H = 13.
Any change in the dimensions of the frame
width and depth should be done according
to the formula that is written on each tool drawing.
60 W 50
45º 38
R2 R1 R25.4 R10 R0.2 R5 R105
4 R5
H
13 R1.5
26.5 18.8 12
H
13 W+24 T.C. Blade
74 RCK-190
ØD B L Ød Tool No
56mm(2-1/4) 25mm(1) 109mm(4-5/16) 3/4
H
13 T.C. Blade
83.3 RCK-192
ØD B L Ød Tool No.
56mm(2-1/4) 25mm(1) 109mm(4-5/16) 3/4
H-9.3
3.7
W+8 T.C. Blade
58 RCK-194
ØD B L Ød Tool No.
32mm(1-9/32) 24mm(15/16) 109mm(4-5/16) 3/4
Router Bits
Industrial Quality
15
19 T.C. Blade
RCK-324
ØD B L Ød Tool No.
106mm(4-3/16) 20mm(7/8) 99.5mm(3-29/32) 3/4
! Maximum RPM 10,000
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com
CNC
USE ONLY
This series of profiles utilizing our patented Nova™ Tool body system of
d d interchangeable carbide insert knives (see pages 82–83) are designed
to give the appearance of a Raised Panel door in MDF or solid panels.
One pass is all that is needed for a simple raised panel look using one
of the “Plunge Form” profiles.
Replacement knives are MDF Grade Carbide and will last much longer
than standard brazed carbide tipped bits.
L L
Repl. T.C.
ØD D1 B Style B1 Ød L Knife Tool No.
25/32 7/16 23/64 Bead 3/16 1/2 2-5/8 RCK-480
25/32 7/16 15/32 Ogee –– 1/2 2-5/8 RCK-481
B1 B B 25/32 7/16 7/16 Ogee 1/4 1/2 2-5/8 RCK-482
D1 D1 1-3/8 15/32 25/64 Traditional –– 1/2 2-5/8 RCK-483
D D 1-7/64 7/16 1/4 Ogee 7/64 1/2 2-5/8 RCK-484
Plunge Form Raised Panel
1-11/32 23/64 17/64 Cove –– 1/2 2-5/8 RCK-485
1-11/32 25/64 21/64 Traditional –– 1/2 2-5/8 RCK-486
Each tool includes 2 knives.
Tool Body #NS-102.
Replacement knives are interchangeable and may be purchased separately.
1:1 1:1 1:1 1:1
RC-2480 RC-2481 RC-2482 RC-2483
1:1 1:1 1:1
RC-2484 RC-2485 RC-2486
To create a more authentic raised panel with a deeper reveal, use one of the
many “Raised Panel” profiles in conjunction with the “Plunge Form” profile
for one pass each. Complete the look with one pass of the “door edge” (see
page 139) on the outside of the door.
Router Bits
CENTER CENTER
OF TOOL 13/32" OF TOOL 3/8"
25/64" 5/8" 25/64" 41/64"
Industrial Quality
5/16"
5/16"
RCK-480 RCK-485
RCK-480 RCK-486
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188.
CNC INSERT CARbIDE
MDF CAbINET DOORS Straight
(Continued) Plunge
CENTER CENTER Trimming
3/8"
OF TOOL 3/8" OF TOOL
35/64" 41/64"
35/64" 5/8"
5/16"
5/16"
RCK-485 RCK-486 Signmaking
RCK-481 RCK-481
Grooving
3/8" 3/8"
35/64" 41/64" Profiling
35/64" 5/8"
5/16"
5/16"
RCK-486
RCK-482 RCK-485 RCK-482
Architectural
Jointing
3/8"
3/8"
35/64" 41/64"
35/64" 5/8"
Flooring
5/16"
5/16"
RCK-485 RCK-486
RCK-483
RCK-483
Door
Making
11/32" 23/64"
35/64" 43/64" Solid Surface
13/32" 21/32"
5/16"
5/16"
RCK-484
RCK-484 RCK-482
RCK-480 Router Bits
Industrial Quality
23/64" 23/64"
35/64" 43/64"
35/64" 43/64"
5/16"
5/16"
RCK-484 RCK-484
RCK-481 RCK-483
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 149
Mullion
DIVIDED
ROUTER BIT SET
The Amana Tool divided light entry door sets enable you to make strong,
®
attractive divided light doors with real mortise-and-tenon joints. The first bit
Muntin shapes the decorative sticking along with a rabbet for the glass. The second bit
cuts the cope and the tenon. Once assembled, all of the door frame parts, stiles,
rails, muntins and mullions, interlock with 3/4" long tenons.
1 Shape profile 2 Cut 3 Route sticking & rabbet 4 Route tenon & cope
on test stock mortises
Used with
Timberline
Hollow Chisel
Mortise Bit
55360
#609-100
55360
55360
5 Cut haunch on 6 Assemble door
rail corners
Each Divided Light Router Bit Set includes
d d Learn Step-by-Step with Master Craftsman Lonnie Bird
If you’ve wanted to construct true divided light doors for fine furniture and
cabinets, look no further. Mullions are 3/4" wide.
ØD ØD1 B B1 R Ød L Tool No.
R L 2-1/8 1-1/4 1 1/4 3/16 1/2 3-1/8
B Replacement Bearing #47759.
B1
D1
D
1:1 1:1 1:1
d d
The wide mullions are perfect for large-scale furniture, cabinets, and
architectural woodwork such as casement windows. Mullions are 1" wide.
ØD ØD1 B B1 R Ød L Tool No.
Router Bits
2-3/16 1-7/16 1-5/8 1/4 1/4 1/2 3-3/4
Replacement Bearing #47759.
R
B B1
Industrial Quality
D1
D 1:1 1:1 1:1
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188.
Want the beauty of traditional cope and stick doors with the strength and
longevity of true mortise-and-tenon joinery? Our newest design allows you
to make beautiful doors with tenons of any length you choose.
This unique door-making system utilizes a “stub” spindle & cope cutter
arrangement. The counterbored cope cutter is secured to the spindle with
a cap screw. A matching profile bit is used to shape the decorative ogee
“sticking” along the edges of the stiles and rails. As the cope is cut on the
ends of the rails, the tenon passes over the top of the bit unobstructed.
This set is for making 1-3/4" thick entry doors with an ogee sticking.
1 Cut Mortise 2 Cut Tenon 3 Shape Cope 4 Shape Sticking Top of Cutter is
Counterbored for Head Cap Screw Secures
Fence of Cap Screw Cutter to Spindle
Used with
Timberline®
Mortise Chisel
The tenon is cut with the new Table
Cope Cutter
Bit #609-100
Amana Tool® Stacking Dado
#658060
Stub Spindle
Each Stub Spindle & Cope Cutter includes
Learn Step-by-Step with Master Craftsman Lonnie Bird
d
d
ØD ØD1 B R Ød L Type Tool No. L
L
2 3/4 5/8 11/32 1/2 2 Cope Cutter w/Stub Spindle
1-3/4 — 11/16 11/32 1/2 2-3/16 Ogee Bit R
Replacement Parts: Cope cutter: #47510. Stub spindle with screw: #47617. B B
Screw for stub spindle: #67012. Ball bearing: #47706. R
D1
D
D
47511
54131
d
d
Entry Door Screen Door
L
L
R
ØD ØD1 B R Ød L Type Tool No.
B B
1-1/2 3/4 15/32 7/32 1/2 2 Cope Cutter w/Stub Spindle
1-1/4 — 15/32 7/32 1/2 1-7/16 Ogee Bit D1 R
D
Replacement Parts: Cope cutter: #47512. Stub spindle with screw: #47617. D
47513
Screw for stub spindle: #67012. Ball bearing: #47706. 54173
d
Router Bits
d
Industrial Quality
L L
ØD ØD1 B R Ød L Type Tool No. R
1-5/8 3/4 3/8 1/4 1/2 2 Cope Cutter w/Stub Spindle B B
1-3/8 — 3/8 1/4 1/2 1-31/32 Ogee Bit R
D1
Replacement Parts: Cope cutter: #47514. Stub spindle with screw: #47617. Screw for D
stub spindle: #67012. Ball bearing: #47706. D
47515
54175
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com
Wainscot doors can be a beautiful addition to an informal, country style kitchen;
their beaded panels are reminiscent of times long past.
L
You’ll need just two bits: the B L
and the
. R B1 B
A
D
D D1
ØD ØD1 A R B B1 B-Kerf Ød L Tool No.
1-7/8 — 1/2 — — — 1/8 to 23/32* 1/2 3
49/64 11/16 — 3/32 25/64 3/16 — 1/4 1-3/4
* A full 3/4" cut can be achieved using one additional #53107 cutter
Use in a table-mounted router.
Router Bits
54163
Industrial Quality
Cut Joint Frame Shape the Wainscot Assemble
Full directions now available at www.amanatool.com/wainscotdoor
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188.
Straight
Plunge
Trimming
Signmaking
Grooving
Profiling
d d
HISTORICAL SHAKER DOOR
Carbide Tipped • 2 Flute
7/8" Frame Material And 5/8" Panel Material Architectural
If you’d like to reproduce exact Shaker details on your next
project, we’ve got the bits that you need. This Shaker door R
L L
set creates a short, steep 20 degree beveled panel edge
just like doors on Shaker originals. A simple thumbnail Jointing
R B
profile along the inside edges of the frame duplicates the B1 B
B1
original profile to complete the authentic look.
Flooring
ØD D1 B R B1 Ød L Type Tool No.
2-13/16 1 1/2 — — 1/2 2-1/64 Raised Panel 54133
D D
1-5/8 1-1/2 7/8 3/8 1/4 1/2 3-1/2 2 Piece Set 55426 D1
Replacement bearing #47708 for Tool #55426. 55426
d Door
Making
Solid Surface
L
75°
B
20°
D1
D
Router Bits
Industrial Quality
54133
25°
7/8
20°
5/8
7/8
1:1 1/4
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 153
Router Bits
Set #54314
Industrial Quality
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188.
d
d
d
L
L
L
R
B B
B R
“The tambour set makes it fast and easy to construct R1
R
beautiful tambours without the fuss of gluing strips to D D D
cloth. The interlocking tambour strips are beautiful, 54310 54312 49498
functional and durable. The ball and socket joints
operate smoothly and, unlike cloth backed tambours,
they won't wear out.” 1:1
- Lonnie Bird
1:1 1:1
The set is easy to set up and use. The first bit (#54310) shapes the face of the
stock; cutting from each face completes the contour of the ball. Afterwards, a
second bit (#54312) is used to shape the socket. A third bit in the set (#49498)
is used to shape the end of the tambour which provides a place to mount a pull
AB210
for opening the completed tambour. Antique
And, assembly is easy. Simply slide the slats together to create a beautiful, Solid Brass
flexible tambour that’s perfect for creating your own roll top desk, breadbox, Knob
or kitchen countertop storage areas.
ØD R R1 B Ød L Tool No.
Optional Tambour Groove Bit
1-3/16 1/8 5/64 1-1/4 1/2 2-3/4 Amana Tool® #45474-S or #45428
1/2 5/64 — 3/8 1/2 3
3/4 1/8 — 3/8 1/2 2-5/16 Minimum Radius For The
Tambour Door is 3-1/2"
Each Tambour Door Router Bit Set includes
Learn Step-by-Step with Master Craftsman Lonnie Bird
1. How to make a tambour door.
2. How to make a brea
breadbox.
www.amanatool.com/tambour
Router Bits
Industrial Quality
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com
Straight
Plunge
Trimming
Signmaking
Grooving
Profiling
STACKING bOxES SET
Carbide Tipped
Architectural Construct a Set of Stacking Boxes by Master Craftsman
Lonnie Bird
If you’re looking for the perfect gift or simply an enjoyable weekend woodworking
project, you’ve found it with these attractive stacking boxes. The carefully crafted
Jointing sides of each box feature fine details that you create yourself with a router and
d
the Amana Tool® Stacking Boxes Router Bit Set. The set also includes an ogee bit
to rout the profile on the lid, two antique brass knobs, and a complete set of
instructions to guide you step-by-step through the entire construction process.
Flooring d
L
Door
Making
B
B
R AB210
D1
Antique
D D
Solid Surface Solid Brass
56210 45446 Knob
d
ØD ØD1 R B Ød L Tool No.
Complete 4 Piece Router Bit Set Includes 2 Antique Knobs and: 58110
1-3/16 15/32 15/64 19/32 1/2 1-7/8 56210
d
7/8 — — 1-1/4 1/2 2-7/8 45446
3/4 1/2 1/8 3/8 1/4 2 56172
Router Bits
L 1-3/4 — 23/64 1 1/2 3 54286
Replacement bearing #47708 for Tool #55426.
L
B
Industrial Quality
B
R Each Stacking Boxes Router Bit Set includes
R
D1 Full Color Instruction Manual
D D Learn Step-by-Step with Master Craftsman Lonnie Bird
56172 54286
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
156 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
d
For Mission Style Glass Door
L
The strongest construction method for making doors is the B1
mortise-and-tenon joint. These new bits allow you to make
tenons with offset shoulders. This makes it easy to construct B2 B
T
offset mortise-and-tenon joints for Mission Style glass doors. B1
Use
ØD ØD1 B B1 B2 T Ød L Mortise Tool No.
D1
2-7/8 2-3/8 7/8 5/16 1/4 1/4 1/2 2-3/8 609-100 D
2-7/8 2-3/8 1-1/8 3/8 3/8 1/4 1/2 2-5/8 609-120
Replacement Bearing #47708; Screw #67090; Key #5004.
5/16"
1"
7/8" 1/4"
3/4"
1:1 53630 5/16"
3/8"
1"
1-1/8" 3/8"
3/4"
1:1 53632 3/8"
d
With Ball Bearing Guide
Create custom louver doors. Now you can easily simulate the timeless look
of wooden shutters (louvers) with this new industrial quality router bit.
ØD ØD1 R B B1 C a° Ød L Tool No.
1-1/4 22mm 5/32 2-29/32 2-9/32 3/16 15° 1/2 4-3/4 ! 12
a°
Replacement bearing #47776. L
! Maximum RPM
! 12 =12,000
B1 B
R
Router Bits
Industrial Quality
C
D1
D
1:1
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com
d d PROFILE SETS
For Glass Doors, Window, Paneling
Straight And Many Other Joinery Applications
Plunge
Carbide Tipped • 2 Flute With Ball Bearing Guides
L L
Our Profile Cutters are a unique and versatile series that can be used for general
B1
B profile routing, glass doors and windows, as well as stile and rail work. (The
Trimming a° a° panel groove and stub tenon must be cut separately.) The inverted hand cutters
B1
B will produce copes that nest perfectly into the profiles cut by the matching
“regular” bits. In addition, the inverted head allows you to profile edges that are
D D out of the reach of regular profile bits. These 1/4" shank bits will fit any router.
BEVEL SET All are equipped with ball bearing guides, either on the tip or on the shank.
Set #49443
Signmaking 49442
ØD R a° B B1 Ød L Type Tool No.
2-Piece Bevel Set Including 49440 & 49442 49443
49440 1-5/16 — 33° 1/2 9/32 1/4 2 Bevel Stile 49440
Grooving
d d 1-1/2 — 33° 3/8 3/32 1/4 2 Bevel Rail 49442
2-Piece Bead Set Including 49640 & 49642 49643
1-1/8 1/4 — 3/8 1/4 1/4 2 Bead Stile 49640
1-1/4 1/4 — 5/16 7/64 1/4 2 Bead Rail 49642
Profiling L L 2-Piece Bead Set Including 49644 & 49646 49647
1-5/16 3/8 — 5/8 17/64 1/4 2 Bead Stile 49644
B1 R
B B1 1-1/2 3/8 — 9/16 1/8 1/4 2 Bead Rail 49646
R B 2-Piece Window Stile & Rail Set Including 49650 & 49652 49653
D 1-1/16 11/16 — 11/16 11/64 1/4 2 Window Stile 49650
Architectural D 1-7/32 11/16 — 5/8 1/8 1/4 2 Window Rail 49652
Set #49643 BEAD SETS Set #49647 2-Piece Ogee Stile & Rail Set Including 49660 & 49662 49663
49642 49646 1-11/32 11/32 — 1/2 1/4 1/4 2 Ogee Stile 49660
1-1/2 11/32 — 3/8 3/32 1/4 2 Ogee Rail 49662
Jointing 2-Piece Ogee Stile & Rail Set Including 49664 & 49666 49667
49640 49644
1-1/2 11/32 — 9/16 1/4 1/4 2 Ogee Stile 49664
d d
1-19/32 11/32 — 3/8 1/8 1/4 2 Ogee Rail 49666
2-Piece Classical Stile & Rail Set Including 49670 & 49672 49673
Flooring
1-3/32 9/64 — 1/2 3/16 1/4 2 Classical Stile 49670
1-1/4 9/64 — 3/8 5/64 1/4 2 Classical Rail 49672
2-Piece Classical Stile & Rail Set Including 49674 & 49676 49677
L L 1-5/16 3/16 — 5/8 7/32 1/4 2 Classical Stile 49674
B1
B 1-1/2 3/16 — 9/16 1/8 1/4 2 Classical Rail 49676
R R
Door B1 B Replacement bearing for stile cutters #47702 (3/8" dia.).
Making Replacement bearing for rail cutters #47701 (1/2" dia.).
Replacement collar for rail cutters #47724.
D D
WINDOW SET Cut a rabbet along
Set #49653 the inside edges of
Solid Surface 49652 all the frame
members.
See pages 92–95
49650 for Rabbeting Bits.
d d d d Install glass
with trim.
L
Router Bits
L L L L
B1 B1
B B
R
B1 R R
R B B1
B
Industrial Quality
D D
OGEE SETS D D
Set #49663 Set #49667
Set #49673
CLASSIC SETS Set #49677
49662 49666 49672 49676
49660 49664
49670 49674
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
158 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
FINGER GRIP d
(Drawer Pull, Door Lip, Etc.)
Straight
Carbide Tipped • 2 Flute Plunge
Produce clean, modern chests and cabinets uninterrupted by hardware pulls L
and knobs by integrating the pulls into the doors, drawers and lids. These
one-pass cutters offer many appearance and ergonomic options, providing R
positive grips and softened, easy-on-the-fingers edges. All bits can be used B 1:1 53800 Trimming
in CNC and table-mounted routers. Larger diameter cutters will work in
D
edge-guide or template-guide equipped handheld routers.
ØD ØD1 ØD2 R R1 B B1 Ød L Tool No d
3/4 — — 1/4 — 1/4 — 1/4 1-3/4 53800 Signmaking
3/4 25/64 — 7/64 3/16 3/4 39/64 1/2 2-1/4 53806
1-1/2 11/16 — 5/64 15/64 13/16 45/64 1/2 2-5/16 53808
1-3/4 11/16 — 7/64 13/64 13/16 11/16 1/2 2-5/16 53810
2 3/4 — 1/4 3/16 1-1/4 — 1/2 2-3/4 53812 Grooving
1-21/32 .386 .649 1/2 7/64 3/4 — 1/2 2-1/4 53816 r! 14 L
r
! Warning: Maximum RPM r
! 14 =14,000
R B Profiling
R1
1:1 53812
D1
D
Architectural
d d
Jointing
L L
R Flooring
R1
B
B1 B R R1
1:1 53806 53808 53810 1:1 53816
D1 D1
D D
D2
Door
Making
WINDOW SILL EDGE d
Carbide Tipped • 2 Flute
These bits shape a flowing ogee edge for creating traditional window sills. Solid Surface
ØD D1 R R1 B B1 C Ød L Tool No
1-1/4 1/2 7/32 1/4 7/8 11/16 3/8 1/2 2-7/8 53822
1-7/16 5/8 3/8 5/16 1-1/8 1 13/32 1/2 3-7/8 53824 L
1-1/4 3/8 7/32 11/32 1 7/8 5/16 1/2 3 53826
1-7/16 11/16 23/64 9/16 1-3/8 1-1/4 3/8 1/2 3-3/8 53828
R B
B1
Router Bits
Industrial Quality
R1
D1 C
D
1:1 53822 53824 53826 53828
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 159
d
DOOR EDGE DETAIL
For DECO Door
Straight
Plunge Carbide Tipped • 2 Flute
Use these bits to shape the edges of cabinet doors. Style #53820 also eliminates
the need for a pull to create a clean, uncluttered look.
L
Trimming ØD ØD1 ØD2 R R1 B Ød L Tool No
2 23/32 31/32 3/8 1/8 1-3/16 1/2 2-1/2 53820
B 1-3/4 — — 3/8 1/8 11/16 1/2 2-5/8 49562
R R1
Replacement bearing #47706 for Tool #49562.
Signmaking D1
D2
D
Grooving d
1:1 53820
Profiling
B
Architectural
R R1
1:1 49562
D
Jointing
Flooring d
DOOR LIP ASSEMbLY
Carbide Tipped • 2 Flute
Corner Round & Taper Rabbet • Complete Assembly
Mill the edges of doors and drawer fronts with this assembly, rounding the show
edge and simultaneously forming a rabbet with a tapered shoulder on the back
Door edge. Works on straight stock from 5/8" through 1" in thickness. Must be used
Making L in a table-mounted router.
a°
R B ØD R a° B Ød L Tool No.
1-9/16 3/8 10° 1 1/2 3 55300
Solid Surface
Replacement Parts:
Description Tool No.
D 3/8" Corner Round Cutter 55302
10° Taper Rabbet Cutter 55304
1/2" Shank Arbor With Nut 47612
Router Bits
Industrial Quality
1:1 55300
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
160 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
r
! Warning: Before use, read router bit safety guidelines on pages 186-188.
Recommended by:
Amana Tool® has developed a line of over 100 special tools for the fabrication of
solid surface materials on the market. There are special tools for face-inlay,
trimming, corner rounding and bullnosing as well as bits for counter-tops and bowls.
Some of our tools with ball bearings utilize our Ultra-Glide™ high-performance
ball bearing guide assembly. The Ultra-Glide™ is a steel ball bearing fitted with
a non-marring Delrin® sleeve.
For decorative work, our other carbide-tipped router bits can also be used for
Photo courtesy of Wilsonart®
solid surface materials.
d
With Ball Bearing Guide
This bit will cut a ‘no-drip’ edge on kitchen and vanity counter-tops in one pass.
L Use in a handheld router.
ØD ØD1 A R B B1 Ød L Tool No.
R B
B1 1 3/4 1/2 5/16 7/8 5/8 1/2 3
1 3/4 3/4 5/16 1-1/8 15/16 1/2 3-1/4
Replacement Ultra-Glide™ bearing #47709 (includes #5003 5/32" hex key).
Replacement steel bearing (old style) #47714.
D1
D
1:1 57120
d
This bit cuts the inner portion of a ‘no-drip’ edge on kitchen and vanity
L countertops, where there’s no edge for a guide bearing to reference. Typically
used with edge-guide-equipped router. (Use the 5/16" radius corner-rounding
bits shown on page 164 to do the outer portion.)
B
ØD A B Ød L Tool No.
D 1 3/4 1/2 1/4 1-1/2
1 3/4 1/2 1/2 2-1/8
Router Bits
Industrial Quality
1:1
The application specifications, current at time of publication, are intended for reference purposes and are subject to change without notice.
Please refer to the Fabrication Guides provided with the particular material or bowl you are using for more specific installation instructions.
Amana Tool® makes no endorsements whatsoever to manufacturers of the solid surface materials listed herein.
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188.
d
With Ultra-Glide ™
Ball Bearing Guide Assembly
This tool is intended for use on 1/2" thick material. It will put a 3/8" radius round
over on the counter top. Furnished with Ultra-Glide™ non-marring Delrin®-sleeved L
ball-bearing guide. For use on “Vaso Sink Collection” by Dupont®.
ØD ØD1 a° R B B1 Ød L Tool No.
R B1 B
1-7/8 3/4 10° 3/8 1 25/32 1/2 2-29/32 aº
Replacement Ultra-Glide™ bearing assembly #47774 (includes #5009 1/8" hex key).
D1
D
Top
1:1
Bowl
57170
d
With Ultra-Glide™ Radius Bearing
This unique tool produces a true 180° bullnose in two passes. Make the
first pass with a regular 1/4" x 5/8" steel bearing (optional). Switch to the
Ultra-Glide™ radius bearing for the second pass. This unique bearing follows L
the curved surface, eliminating the flat track typical of the two-pass cut with
the regular bearing. B
R
Repl.
ØD ØD1 A R B Ød L Bearing Tool No.
1-3/8 3/8 3/4 3/8 5/8 1/2 2-5/8 47766
D1
1-5/8 5/8 1 1/2 3/4 1/2 2-3/4 47767
D
2-1/8 5/8 1-1/2 3/4 1 1/2 3 47768
2-5/8 5/8 2 1 1-1/4 1/2 3-3/16 47769 ! 18
Standard 1/4 x 5/8 bearing - use #47712 - (order separately).
! Maximum RPM
! 18 =18,000
57191 57190 57192 57194
Router Bits
Industrial Quality
1:1
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com
d
With Ultra-Glide™
Ball Bearing Guide Assembly
Use this bit for rounding edges where there’s access to a flat surface for the
L
Ultra-Glide™ non-marring bearing to reference. Used in concert with either
the Counter-top (‘No-Drip’) Design bit or the corner-rounding bit with a radius
B bearing, this bit will produce a no-drip edge or a bullnose in two passes.
R
ØD A R B Ød L Tool No.
1-1/8 3/4 5/16 1/2 1/4 1-7/8
D
1-1/8 3/4 5/16 1/2 1/2 2-1/4
3/4 — 1/8 3/8 1/2 2-5/16
1 — 1/4 1/2 1/2 2-7/16
1-1/2 — 1/2 3/4 1/2 2-3/8
2 — 3/4 1 1/2 2-3/8
Replacement Ultra-Glide™ bearing assembly #47707 (includes #5000 1/8" hex key).
1:1 57149 57147 57150 57139 57141
A
d
With Upper Ball Bearing
Round the lower edge of a counter with the router resting on the upper surface.
No need to turn the heavy material over. This tool is especially useful for
L “job-site” work.
(To complete a full 180° bullnose on 1/2," 1," 1-1/2" or 2" thick stock, use
the corner-rounding bit with the radius bearing.) Furnished with Ultra-Glide™
R non-marring Delrin®-sleeved ball-bearing guide.
B
ØD A R B Ød L Tool No.
2-1/8 1 1/2 3/4 1/2 2-7/8
D
2-5/8 1-1/2 3/4 1 1/2 3 ! 14
Replacement Ultra-Glide™ bearing #47737.
Replacement steel bearing #47738.
Replacement collar #47740.
! Maximum RPM
! 14 =14,000
A
Router Bits
1:1 57138
57140
Industrial Quality
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188.
d
With Ultra Glide Ball Bearing Guide
™
Trim a sink cutout flush with the bowl in stages using these “over-hang” and
flush trim bits in tandem. The overhang bits are equipped with non-marring
Ultra-Glide™ bearings that are tapered to match the slope of the bowl’s side.
A first pass with the appropriate overhang bit cleans the cutout edge, leaving a L
very slight overhang at the underside of the counter. A pass with the flush-trim
bit completes the operation.
B
ØD B a° Ød L Description Tool No.
3/4 1 10° 1/2 3-1/4 1/16 Over-Hang
49/64 1-1/2 5° 1/2 3-1/2 1/8 Over-Hang
a°
3/4 1 0° 1/2 3-1/2 Flush Trim
D
(Includes #5003 5/32" hex key).
Bearing Assembly Tool No.
47726
47709
47733
57153 10°
1:1 57155 5°
d
For Wilsonart HD Laminate Sinks
®
Only minimal sanding is required after using this bevel trim bit to profile the L
laminate and adhesive of a Wilsonart® HD sink.
B
ØD ØD1 ØD2 B a° Ød L Tool No. a°
1-55/64 15/16 7/8 3/8 50° 1/4 1-7/8
D2
Replacement bearing #47777. D1
D
Router Bits
Industrial Quality
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com
d d
FLUSH TRIM
With Ball Bearing Guide
Straight
Plunge Carbide Tipped • 4 Flute
For a super-smooth cut finish with a flush trimming bit, use one with four-flutes.
Feed rate is reduced, but chipping is virtually eliminated.
Trimming ØD B Ød L Tool No.
L 3/4 1 1/2 3 57184
3/4 1-1/2 1/2 4 57185
B 3/4 2 1/2 4-1/2 57186
L
3/4 2 1/2 4-3/4 57187 **
Signmaking
Standard replacement bearing (steel) use #47714.
B Optional Delrin® replacement bearing (steel) use #47709, for solid surface application.
** Replacement Bearings: #47714 (bottom), #47721 (2 top). Retaining Collar #47740.
Grooving D
4 Flute
Profiling
D
57187
Architectural
Jointing
Flooring
Up-Cut Down-Cut
ULTRATRIM™ SOLID CARBIDE
d d
SPIRAL TRIM
With Double Ball Bearing Guide
Door 2 Flute
Making
For the ultimate, chip-free finish in solid-surface, laminate, and melamine, and
for template work of all kinds, use this solid carbide up-spiral bit. The twin ball-
bearing pilot enhances the stability of the tool.
Solid Surface ‘Up-cut’ ‘Down-cut’
L ØD B Ød L Tool No. Tool No.
1/2 1-1/4 1/2 3-3/4 46300 46400
B
1/2 2 1/2 4-3/4 46304 46404
Standard replacement bearing: (.500" dia.), use #47706.
Undersized bearing (.492" dia.), use #47715 – for use after re-sharpening.
Replacement nut: use #67086.
Router Bits
D D
Industrial Quality
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
166 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
SOLID CARBIDE
SPIRAL PLASTIC ‘O’ FLUTE Straight
Single Flute Up-Cut & Down-Cut Plunge
This bit is designed to produce super clean, smooth cuts, especially in acrylic Up-Cut Down-Cut
materials (Plexiglas,® Lucite®) other plastics and wood. It includes a special d d
carbide grade, very high tolerance grinding and a unique carbide polishing
process. Trimming
For Super Clean Cuts In:
• Plastic • Solid surface materials L
• Wood • Foam board
Signmaking
B
The most popular design. Fits most CNC machines.
- Right Hand Helix
D D
- Right Hand Cut
Grooving
‘Up-Cut’ ‘Down-Cut’
ØD B Ød L Tool No. Tool No.
1/8 1/2 1/8 2 51410 51510
3/16 5/8 3/16 2 51412 51512 Profiling
1/4 3/4 1/4 2 51404 51504
1/4 1 1/4 2-1/2 51405 51505
Architectural
Jointing
DRAINBOARD d
Carbide Tipped • 2 Flute
Flooring
This bit is perfect for cutting custom drainboard patterns in solid surface
materials, as well as wooden countertops and cutting boards. It produces a
flat-bottomed groove with radiused corners. Use in a handheld router guided L
by a template, fence or edge guide.
ØD B R Ød L Tool No.
B Door
1/2 1/2 1/8 1/2 2 57114 Making
5/8 1/2 1/8 1/2 2 57115 R
D
3/4 1/2 1/8 1/2 2 57116
1 1/2 1/8 1/2 2 57117
Solid Surface
1:1 57114 1:1 57115
Router Bits
Industrial Quality
1:1 57116 1:1 57117
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 167
d CUT-OUT BITS
Carbide Tipped • 4-Wing
Straight
Plunge Use for cutting out undermount bowls, Surell,® Fountainhead® and other solid
surface undermount bowls. For Corian® bowls, must be used with a Corian®
bowl template.
ØD B C Ød L Tool No.
Trimming
L 3 3/16 7/8 & 1 1/2 3-5/32 57165 r ! 12
3-5/8 1/4 1 1/2 3-9/32 57166 r ! 12
7/8"
Bearing Spacer Collar Key Tool No.
Signmaking 47745, 47747 55371 47739 5002 57165
1"
47749 55363 47739 5002 57166
B
D
Note: To achieve the best possible results use these bits with a variable speed router:
57165 Minimum horsepower: 2-1/2 Speed: 12,000 RPM or less.
Grooving
r
! Warning: Maximum RPM r
! 12 =12,000
d
Profiling
Architectural L 1:1 57165 1:1 57166
C
Jointing
B
D
57166
Flooring
d
COUNTER-TOP TRIM
Door Carbide Tipped • 6-Wing
Making Create extra-smooth shallow recesses in countertops with this 6-wing tool.
The radiused cutting tips produce an edge that’s easy on the fingers and simple
to clean. Use in a handheld router.
Solid Surface ØD B C Ød L Tool No.
L 2-1/16 1/4 1/2 1/2 3-5/16 57136
C 1:1
B
Router Bits
D
Industrial Quality
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
168 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
COVE/BACKSPLASH d
™
With Upper Ultra-Glide
Ball Bearing Guide Assembly Straight
Plunge
Carbide Tipped • 2 Flute
Radius the transition from horizontal counter-top surface to vertical backsplash
with this bit. The cutting profile is a modified cove, having rounded corners L
separated by a flat. A shank-mounted Ultra-Glide™ bearing guides the cut. Use Trimming
in a handheld router.
ØD R B Ød L Tool No.
1-1/8 3/8 1/2 1/2 2-7/8 57232 B
Replacement Ultra-Glide™ bearing #47737. R Signmaking
D
Replacement collar #47740.
Grooving
Profiling
Template
Architectural
Jointing
1:1
Flooring
ROMAN OGEE d
™
With Ultra-Glide
Ball Bearing Guide Assembly Door
Making
Carbide Tipped • 2 Flute
Form a classic Roman ogee profile on the edges of solid-surface materials
without concern that the bearing will damage it. This bit’s Ultra-Glide™ bearing L
is gentle on the material.
Solid Surface
B
R B1
ØD R R1 B B1 Ød L Tool No.
1-1/8 1/8 5/32 5/8 3/8 1/2 2-1/2 57127 R1
Replacement Ultra-Glide™ bearing #47707.
D
Optional replacement steel bearing #47706.
Router Bits
Industrial Quality
1:1
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 169
Straight
Plunge
Trimming
Signmaking
Grooving
d
UNDERMOUNT BOWL
With Ultra-Glide™
Ball Bearing Guide Assembly
Profiling Carbide Tipped • 2 Flute
These bits prepare and/or finish counter-top edges in conjunction with
L
undermount bowl installations. The roundover and ogee bits trim and profile the
counter-top edges after the bowl is mounted. The bevel bit trims the sink cut-out
flush with an installed undermount bowl, but it also can be used with a template
Architectural to prepare a sink cut-out for a bevel-mount bowl. All these tools can be used for
a°
R B1 B undermount applications of Corian® sink and bowl #’s 802S, 804S, 805S, 809S,
and 871S.
ØD a° R A B B1 Ød L Type Tool No.
Jointing
D 2-1/8 18° 1/2 1/2 1 3/4 1/2 3 Roundover 57128
Roundover 2-1/4 18° 9/16 3/4 1-1/4 1 1/2 3-1/4 Roundover 57130
d 2-1/8 15° 1/2 1/2 1 3/4 1/2 3 Ogee 57124
Flooring 2-1/4 15° 9/16 3/4 1-1/4 1 1/2 3-1/4 Ogee 57126
1-1/4 11.5° — 1/2 & 3/4 15/16 — 1/2 3 Bevel 57122
Replacement Ultra-Glide™ bearing assembly #47726 (all tools).
(Includes #5003 5/32" hex key and #67093 allen screw).
L
Door
Making
a° B1 B
R B1 Undermount Flush Step-Down
Solid Surface
D
Ogee A Top Top
1:1 A
d
57128
Bowl
57130 Bowl
Router Bits
L
A Top Top Top
1:1 A A
Industrial Quality
B
57124 Bowl 1:1
a°
57126 Bowl 57122 Bowl
D
Bevel
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
170 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
UNDERMOUNT BOWL d
™
With Ultra-Glide Ball Bearing Guide
Straight
Carbide Tipped Plunge
2 Flute Assembly For Corian ® Bowl #’s
874s, 810as, 850, 857b, 859s, 871s, 872s, 891s, 893s
L
These bits are designed specifically for use in undermount installations of
Corian® bowl #874-S. They trim and profile the counter-top edges after the Trimming
bowl is mounted.
a° B1 B
R
ØD a° R A B B1 Ød L Type Tool No.
1-25/32 17° 3/8 1/2 11/16 17/32 1/2 2-1/2 Roundover 57156
2 14° 1/2 1/2 11/16 17/32 1/2 2-1/2 Roundover 57158
D Signmaking
Roundover
2-1/8 17° 1/2 3/4 1 25/32 1/2 2-7/8 Roundover 57160
2-1/4 15° 3/4 3/4 1-1/4 25/32 1/2 3 Roundover 57162 r ! 20
1-1/4 10° — 1/2 or 3/4 1 — 1/2 3 Bevel 57168
Grooving
Replacement Ultra-Glide™ bearing assembly #47731 (includes #5009 1/8" hex key
and #67146 special flat head machine screw).
r
! Warning: Maximum RPM r
! 20 =20,000
Profiling
A Top Top Top Top
1:1 A
57156 Bowl 57158 Bowl
1:1 Architectural
57160 Bowl 57162 Bowl
Jointing
Flooring
d
Door
Top Making
A
1:1
57168 Bowl Solid Surface
L
B
a°
Router Bits
Industrial Quality
D
Bevel
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 171
d
KARRAN®
STAINLESS STEEL
Straight
Plunge SINK EDGE BITS
With Ultra-Glide™ Radius Ball Bearing Guide
Carbide Tipped
Trimming L This bit is designed specifically for use for the Karran stainless steel edgesinks
for laminate and 1/2" solid surface materials. They trim the counter-top edge
after the bowl is mounted.
B
ØD A B Ød L Description Tool No.
1-3/16 1/2 or 3/4 1 1/2 3-1/8 Bevel 57169
Signmaking
49/64 1/2 or 3/4 1-1/2 1/2 3-1/2 Flush 57155
D 7/8 1/2 or 3/4 7/8 1/4 2-1/4 Bevel 49409
Bevel Replacement Ultra-Glide™ bearing assembly #47733 (fits #57169 & #57155
Grooving and includes #5009 1/8" hex key and #67146 special flat head machine screw).
Steel ball bearing #47718 (fits #49409).
d
Profiling
A Top
1:1 57169
Architectural
L Solid Surface with
Stainless Steel Sink
B
Jointing
Flooring
D
Flush
Laminate with
d Stainless Steel Sink
Door
Making
L
Solid Surface
B
D
Bevel
Router Bits
Industrial Quality
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
172 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
WILSONART® BOWL d d
™
With Ultra-Glide
Ball Bearing Guide Assembly Straight
Plunge
Carbide Tipped • 2 Flute
These three bits, designed specifically for use with the Wilsonart® bowl,
L
produce three different edge treatments – a bevel with a hard edge, a bevel
with a rounded-over edge, and a bevel with an ogee-profile edge. Use with L Trimming
any handheld router; the Ultra-Glide™ bearing guides the cut.
a° B1 B
B R
Counter-top
a°
ØD a° R Thickness(A) B B1 Ød L Type Tool No.
1-1/2 12° — 1/2 to 1-1/4 1-1/4 — 1/2 3-1/16 Bevel 57129 D Signmaking
2-3/8 12° 9/16 1/2 to 3/4 7/8 11/16 1/2 2-11/16 Roundover 57161 Roundover
D
Replacement Ultra-Glide™ bearing assembly #47732 (includes #5009 1/8" hex key
Bevel
and #67146 special flat bead machine screw).
Grooving
Top
A
Top Profiling
1:1 A
57129
1:1
Bowl 57161 Bowl
Architectural
Jointing
TOPMOUNT ROUTER d d Flooring
EUROPEAN TYPE
Carbide Tipped • 2 Flute
For sink cut-outs and to prepare counter-top for topmount installation of sink or
bowl. Among others, can be used for Corian® sink and bowl #’s 830A, 852RA,
852LA, and 854RA. L L Door
Making
ØD a° B Ød L Type Tool No.
3/8 — 1 1/2 2-3/4 1-Flute Plunge 45302 B
29/32 15° 15/16 1/2 2-1/2 2-Flute Bevel 57132 B
a°
Solid Surface
D
D 2-Flute Bevel
1-Flute Plunge
Router Bits
Industrial Quality
1:1 45302 1:1 57132
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 173
Straight
Plunge
Trimming
Signmaking
Grooving
Profiling
decorative edge
With Ultra-Glide™
Ball Bearing Guide Assembly
Carbide Tipped • 2 Flute
Architectural
Amana Tool® has a wider variety of profile cutters designed specifically for use
on solid surface materials than any other manufacturer. This series of profile
cutters are scaled for thick or even built-up solid surface structures. With most
profiles, uncomfortably sharp edges are entirely eliminated, replaced with soft
Jointing curves. All bits are equipped with easy-on-the-material Ultra-Glide™ pilot
bearings. All are large bits that must be run at reduced speed in a high-
horsepower router.
Flooring d ØD R B B1 Ød L Tool No.
2-5/8 5/16 1-5/8 15/16 1/2 3-1/2 57200
Replacement Ultra-Glide™ bearing #47709 (includes #5003 5/32" hex key).
r
! Warning: Maximum RPM 12,000
Door
Making
B
Solid Surface
B1
R
1:1
D
Router Bits
Industrial Quality
Note: Tools on this page can also be used for woodworking applications by
substituting #47709 Ultra-Glide™ bearing for #47714 steel bearing. Order
#47714 separately.
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
174 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
decorative edge d
™
With Ultra-Glide
Ball Bearing Guide Assembly Straight
Plunge
Carbide Tipped • 2 Flute
ØD R B B1 Ød L Tool No.
1-5/8 15/64 2 1-17/32 1/2 3-1/2 57202
Replacement Ultra-Glide™ bearing #47709 (includes #5003 5/32" hex key). Trimming
L
R B
B11 B
Signmaking
Grooving
1:1 D
Profiling
d
ØD R R1 B B1 Ød L Tool No. Architectural
2-3/4 1/2 1/4 1-5/16 1 1/2 3-1/8 57208
Replacement Ultra-Glide™ bearing #47709 (includes #5003 5/32" hex key).
r
! Warning: Maximum RPM 10,000
Jointing
L
Flooring
R B
B1
R1
1:1 Door
D Making
Solid Surface
d
ØD R R1 R2 R3 B B1 Ød L Tool No.
3 3/16 1/2 1/8 3/8 1-9/16 1-5/32 1/2 3-5/16 57210
Replacement Ultra-Glide™ bearing #47709 (includes #5003 5/32" hex key).
r
! Warning: Maximum RPM 10,000
Router Bits
Industrial Quality
L
R
B
R1 B1
R2
R3
1:1 D
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 175
d
decorative edge
With Ultra-Glide™
Straight Ball Bearing Guide Assembly
Plunge
Carbide Tipped • 2 Flute
ØD R B B1 Ød L Tool No.
2-3/4 1/2 1-1/4 1 1/2 3-1/4 57214
Trimming L Replacement Ultra-Glide™ bearing #47709 (includes #5003 5/32" hex key).
r
! Warning: Maximum RPM 10,000
B
B1
R
Signmaking
D
Grooving
1:1
Profiling
d
Architectural ØD R R1 B Ød L Tool No.
2-1/2 3/8 1/2 1-1/8 1/2 3-1/8 57216
Replacement Ultra-Glide™ bearing #47709 (includes #5003 5/32" hex key).
r
! Warning: Maximum RPM 12,000
Jointing
Flooring
R B
R1
D 1:1
Door
Making
Solid Surface
d ØD R R1 B B1 Ød L Tool No.
2-1/2 1/4 3/8 1-1/4 1-1/16 1/2 3-5/8 57218
Replacement Ultra-Glide™ bearing #47709 (includes #5003 5/32" hex key).
r
! Warning: Maximum RPM 12,000
Router Bits
B
R B1
Industrial Quality
R1
D 1:1
Note: Some tools on this page can also be used for woodworking applications
by substituting #47709 Ultra-Glide™ bearing for #47714 steel bearing. Order
#47714 separately. With #47707 Ultra-Glide,™ substitute #47706 steel bearing.
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
176 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
chamfer d
™
With Ultra-Glide
Ball Bearing Guide Assembly Straight
Plunge
Carbide Tipped • 2 Flute
Chamfer and even bevel solid-surface edges with one of these two bits. These
large bits must be run at reduced speed in a high-horsepower router.
Trimming
ØD a° B Ød L Tool No. L
2 45˚ 3/4 1/2 2-5/8 57220
2-17/32 30˚ 1-3/4 1/2 3-5/8 57258 r ! 12
aa˚˚ B
Replacement Ultra-Glide™ bearing #47707.
Signmaking
r
! Warning: Maximum RPM r
! 12 =12,000
D Grooving
Profiling
Architectural
1:1 57220 57258
Jointing
Flooring
doUBLe BULLNoSe d
With Ball Bearing Guide
Carbide Tipped • 2 Flute
Cut bullnose profiles on two layers in a stack in one pass with this large cutter. Door
Making
ØD ØD1 R B B1 Ød L Tool No.
1-1/2 1-1/8 15/64 2 1-1/2 1/2 3-1/8 57238 R L
Replacement bearing #47712.
Solid Surface
B1 B
D1
Router Bits
Industrial Quality
D
1:1
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 177
d
mULti radiUS
With Ultra-Glide™
Straight Ball Bearing Guide Assembly
Plunge
Carbide Tipped • 2 Flute
This versatile profile cutter can be used in its entirety or selectively to produce
an ogee, bead, or combinations of the two. It will handle material up to 1-1/2"
Trimming L thick. Use in a handheld router, guided by the non-marring Ultra-Glide™ pilot
bearing or an edge guide.
R
R1 B
ØD R R1 R2 B Ød L Tool No.
R2 2-1/4 15/64 3/32 9/32 1-3/8 1/2 3-1/8 57242
R1
Signmaking Replacement Ultra-Glide™ bearing assembly #47707.
Grooving
Profiling
1:1
Architectural
Jointing
d
LoNg ogee
Flooring With Ultra-Glide™
Ball Bearing Guide Assembly
Carbide Tipped • 2 Flute
To soften and beautify a thick or built-up edge, use this bit, which cuts a
vertically elongated reverse ogee profile. Use with a handheld router.
Door L
Making ØD R R1 B B1 Ød L Tool No.
R 1-3/4 15/64 33/64 1-1/4 1 1/2 3-1/4 57246
B
B1 Replacement Ultra-Glide™ bearing assembly #47707.
Solid Surface R1
1:1
Router Bits
Industrial Quality
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
178 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
With Ultra-Glide™
Ball Bearing Guide Assembly
Cut a table-edge type profile on the edge of a solid-surface countertop with this
large bit. The profile is an elongated ogee. Because of its large diameter, this bit
should only be used in a high-horsepower router and run at reduced speed. d
ØD R R1 B Ød L Tool No.
3 5/16 1/2 1-1/8 1/2 3-1/8
Replacement Ultra-Glide™ bearing assembly #47709.
! Maximum RPM 15,000
B
R
R1
1:1
D
This bit produces a table-edge type profile on a solid-surface countertop. The
bit combines the traditional ogee form with a large quarter-round. Because of its
large diameter, this bit should only be used in a high-horsepower router and run
at reduced speed.
d
ØD R R1 R2 B Ød L Tool No.
3 1/4 15/64 1/2 1-11/64 1/2 3-1/16
Replacement Ultra-Glide™ bearing assembly #47707.
! Maximum RPM 16,000
R B
R1
R2
1:1 D
This bit combines a traditional shallow ogee form with a substantial quarter-
round to produce a table-edge type profile on a solid-surface counter-top. Adjust
cut depth of router to control the margin of the profile. Because of its large
diameter, this bit should only be used in a high-horsepower router and run at
reduced speed.
d
ØD R R1 B Ød L Tool No.
Router Bits
Industrial Quality
2-1/2 19/32 19/64 7/8 1/2 2-3/4
Replacement Ultra-Glide™ bearing assembly #47707.
B
R
R1
1:1
D
3D renderings & tool illustrations shown at actual size. Visit our website for additional 1:1 profiles.
! Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com
d
decorative edge trim
Carbide Tipped • 2 Flute
Straight
Plunge
ØD B B1 R Ød L Tool No.
1-5/16 1-1/16 7/32 1-3/8 1/2 3-1/8 57257
Replacement bearing #47709.
L
Trimming B1
B
R
Signmaking
1:1
D
Grooving
Profiling
d
WavY JoiNt
Carbide Tipped • 2 Flute
Creates a solid joint in the material by adding a greater surface for glue.
ØD B Ød L Tool No.
Architectural 5/8 1-13/16 1/2 3-1/8 57260
L
Jointing B
Flooring D
1:1
Door
Making
Solid Surface
d
BackSpLaSh
Carbide Tipped • 2 Flute
Shape a low backsplash – the transition from counter-top to backsplash, the
slope, and its top edge-in one operation with this unique bit.
ØD a° R R1 B B1 Ød L Tool No.
1-17/32 7˚ 15/64 1/8 1-9/16 1-3/16 1/2 3-1/16 57228 r ! 22
L
1-17/32 7˚ 15/64 1/8 2-1/8 1-3/4 1/2 3-11/16 57230 r ! 18
r
! Warning: Maximum RPM r
! 18 =18,000; r
Router Bits
! 22 =22,000
R
B
B1
Industrial Quality
R1 a˚
D
1:1
3D renderings & tool illustrations not shown at actual size. Visit our website for additional 1:1 profiles.
180 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
Router Bit Technical Information
All router bits are carbide-tipped unless stated otherwise.
Technical informaTion 2. roUTer Tool SelecTion
Router Bit Selection, Application & Maintenance Carbide router bits provide an excellent finish in solid hard and
Amana Tool® has prepared the following guidelines to assist softwood, wood by-products such as MDF and plywood, and
our distributors and customers in the selection, application abrasive materials such as plastic, Corian® and other solid surface
and maintenance of our high quality industrial routing tools. sheet goods. Under certain conditions, non-ferrous metals such as
aluminum and brass can also be cut using carbide tools provided
that a coolant is used and proper clamping devices are employed.
ALL ROUTER BITS ARE CARBIDE-TIPPED Extreme care should be taken when cutting non-ferrous metals,
UNLESS STATED OTHERWISE. and if you are not familiar with the special cutting properties
of these materials, please seek professional advice before you
attempt any routing or sawing. Never attempt to cut ferrous
metals (steel, iron, etc.) with carbide router bits.
1. General informaTion Solid steel portions of our tools (shank, tool body) are turned,
The router bits contained in this catalog are designed for use in milled and ground (not cast) from the highest quality tool steel
portable or stationary/CNC routing machines only. Do not use router available.
bits in any other equipment such as a drill press, portable electric Note: On certain grinding equipment, cast body tools have
drill, etc. Conversely, ‘Boring Bits,’ are designed for boring machines been known to be more difficult to re-sharpen due to indexing
and/or drill presses, and not for routing machines or portable drills. complications. Choose your tools carefully.
Unless specified otherwise, all router bits in this catalog are for Always use the shortest cutting edge available that will meet the
clockwise (right hand) rotation. requirements of your application. Excessive cutting edge length
Always wear proper eye protection while operating routers. and/or overall length compounds vibration and deflection – a
Read and understand all information provided with the particular leading cause of tool breakage.
router you are using. The router should be of high quality and all Always use the largest diameter shank available that your router
parts thereof should be well maintained. Keep body, clothing and will accommodate.
hair away from all moving parts. Always use the correct size collet for your router and avoid using
Cutting tools that are properly sharpened and maintained will cut collet reducing sleeves or bushings. Reducers only add to vibration
faster, better and longer, and will be safer to use. In addition, less and run-out, and they generally do not provide the necessary
horsepower is required (both machine & operator) when sharp tools holding capabilities as with a collet alone.
are used.
Router Bit Index (by type) pages IV-V. Router Bit Index (by number) pages 339-345. www.amanatool.com 181
Single Edge (1 Flute) Router Bits Solid Carbide Plastic (O) Flute
should be used when the speed of the cut ‘Up-Cut’ And ‘Down-Cut’ Router Bits
(feed-rate) is primary and the finish is secondary. are used to produce super clean cuts, especially in
Available on certain plunge bits. acrylic materials (Plexiglas,® Lucite®), other plastics,
solid surface and wood.
Solid Carbide Aluminum (O) Flute
Double Edge (2 Flute) Router Bits ‘Up-Cut’ And ‘Down-Cut’ Router Bits
should be used when the finish is primary and are specifically designed for cutting aluminum,
feed-rate is secondary. Most router bits have brass, copper and other non-ferrous metals.
2 flutes.
Solid Carbide Router Bits
3° Down-Shear Router Bits (diamond pattern), are recommended for highly
are recommended when the finish from a standard abrasive materials such as fiberglass, tile, etc.
bit is inadequate or the horsepower is low. Shear
action cuts a smaller portion of the workpiece at
one time due to a radial flute design. Bits are
available in a straight plunge, shear plunge with
upper ball bearing and Supertrim.™ Down-shear is not
intended to be used ‘inverted’, as in a router table or
shaper. Also see the new ‘opposite-shear’ bits. Spiral Flute ‘Up-Cut’ and ‘Down-Cut’
Router Bits
are recommended for deeper mortising where chip
Stagger-Tooth Router Bits removal is essential to continuing the cut. Also used
Router Bit Technical Information
are considered 2 flute but the cutting edge is split for some plastics and solid-surface materials such
(staggered 180°) between the two flutes. These as Corian®, etc.
tools combine the speed and chip clearance of
one flute bits, with the strength and balance of
two-flute bits.
Solid Carbide Compression Spiral Bits
Flush Trim (2 Flute, 3 Flute And 4 Flute) are designed for CNC applications requiring high
Router Bits feed rates and a clean finish. Particularly suitable for
double-sided melamine or laminated material.
are available on some trim bits, spirals and insert Choose either single flute for the highest possible
bits. This design will provide an extremely smooth feed rate or double flute for the best finish.
All router bits are carbide-tipped unless stated otherwise.
finish on certain laminates that tend to chip easily.
Chipbreaker Bits
can be specially ordered for 3/4" shank CNC
Panel Pilot Router Bits applications. Designed to cut chipboard and MDF at
45506
have a plunge point and a pilot that can serve as an high automatic feed-rates found on CNC machines.
edge guide. Generally used by mobile home and Each flute is ground so that the chip breakers are
trailer manufacturers. staggered to each other, giving a straight cut.
(Two flute only). Also available as standard with
certain types of spiral bits.
Insert Tooling
Mortising Bits should be considered for long-term cost efficiency
especially on high-volume or repeated work. Cutter
have a large gullet between the two flutes for better diameters remain constant for a high degree of
chip removal during mortising type cuts. Screw-type accuracy and never require re-sharpening. Consult
bits are normally used in mortising jigs and door your local dealer or Amana Tool® for a fast cost
machines. comparison analysis on insert-type tooling.
182 Router Bit Index (by type) pages IV-V. Router Bit Index (by number) pages 339-345.
3. roUTer Tool USaGe 4. roUTer Tool mainTenance
Always use properly sharpened cutting tools. The feed-rate of a Carbide tools can be re-sharpened many times. Always have your
router to the workpiece (or vice-versa if used in a router table) is cutting tools re-sharpened by a reputable grinding firm only. Do
very important to the longevity of the tool and the overall quality of not attempt to sharpen your own router bits by means of files,
cut. The operator should feel a constant, even pressure when the whetstones, etc.
work is applied to the cutter. If chattering occurs, stop the router Keep your cutting tools clean and free of dirt, wood resin, pitch
promptly and inspect the router, cutting tool, collet and clamping and other contaminants using a standard commercial solvent. A
devices, and ensure that the proper tool is being used for the light coat of machine oil should prevent any surface discoloration
material being cut. or rust. Thoroughly wipe clean all shanks to prevent slippage
Always keep the tool moving. Allowing the tool to ‘dwell’ in the cut during use.
will cause burning and reduce tool life immensely. Remember, heat Ball Bearings should not be cleaned with
can ruin a sharp tool. solvents, as this will deteriorate the special
Feed-rate ultimately depends on three factors: 1) the type of grease packed inside them. Rather, use an air
material being cut, 2) the amount of material being removed and gun to blow off any dust or dirt. ‘Frozen’ ball
3) the type of tool being used. bearings (ones that do not rotate freely) should
be replaced promptly.
Hardware (nuts, screws, washers) should be
replaced if worn.
Board Face
See “Replacement Parts” on pages 190-191.
‘Climbing’
5. roUTer Tool TerminoloGY
Cutting Diameter (‘D’) refers to the largest cutting diameter of the
‘Climb-cutting’ is not recommended as a portable routing tool and is represented in fractions, decimals and/or millimeters.
technique. This action tends to grab the wood and pull the cutting Cutting Length (‘B or C’) refers to the length or ‘depth’ of the
tool in the direction indicated. cutting edge. This dimension usually represents the cutting edge
If using extremely large diameter tools, length parallel to the length of the shank and is represented in
always accomplish the cut with several fractions and/or millimeters.
Router Bit Technical Information
All router bits are carbide-tipped unless stated otherwise.
passes of the router or, if applicable, Shank Diameter (‘d’) refers to the largest diameter of the shank
remove as much material prior to using and is equivalent to the router collet inside diameter that is
the large tool by means of chamfering, necessary to use the tool. This dimension is represented in
etc. This method will increase tool life fractions.
and generally be a safer practice than Overall Length (‘L’) refers to the total length of a router bit from
trying to remove too much material in the top of the shank to the bottom of the tool at its furthestmost
one pass. Large diameter router bits point. This dimension is represented in fractions and/or millimeters.
should generally be used in a high Radius (‘R’) of a cutting tool edge refers to one-half the diameter
quality router table. of a complete circle, and is shown in fractions and/or millimeters.
Proper collet condition is of extreme Bevel Angle (‘a°’) refers to the angle formed between the cutting
importance. Worn, scored or out-of- tool edge and a straight line drawn parallel or perpendicular to the
round router collets do not provide shank length, and is measured in degrees.
adequate holding power and will
increase run-out and vibration. Multiply Rake Angle (‘T’) refers to the angle (or ‘hook’) of the cutting tool
these factors by the router RPM tip in relationship to a straight line drawn perpendicular through
(22,000 and greater), and you will realize the center of the tool. This dimension is measured in degrees.
why we must emphasize the importance Primary Radial Clearance (‘P’) refers to the relief grind on the
of proper router collet condition. Do not tip of the tool and is measured in degrees.
assume that new collets are geometrically correct. Dark marks Secondary Radial Clearance (‘O’) refers to the combined relief
or grooves in the router bit shank usually indicate slippage and grind of the primary clearance and the clearance ground into the
a worn collet, which should be replaced immediately. body of the tool. This dimension is measured in degrees.
Router bits should always be completely inserted into the collet Web Diameter (‘N’) refers to the thickness of the ground steel
and backed-off slightly (1/16" approx.). Never partially insert the body of the tool, including the heel area (‘M’). The web must be
bit into the collet. Follow the guidelines provided in your router of adequate thickness to withstand industrial routing applications.
owner’s manual for further information regarding this and the d d d
appropriate usage of the router base and sub-base (particularly
for larger diameter tools that do not clear the standard opening
in the router sub-base).
L L ‘T’
a°
a°
L
C B B ‘P’
‘N’ ‘O’
R B
D ‘M’
D
D ØD – DIAMETER
Router Bit Index (by type) pages IV-V. Router Bit Index (by number) pages 339-345. www.amanatool.com 183
cnc roUTer BiT feed raTe info
Explanation of the charts Recommended Feed Rate
Each chart is relating to one type of the different tool families on a different The following charts give you the recommended
type of wood. Each line on a chart is relating to the cutting diameter of the tool. feed rates for working with different spiral family
If you cannot find the exact diameter, please relate it as a parallel line to the groups on different wood types, plastics and
existing lines. aluminum. Because of the dependency which we
The information on the charts require a rotation speed of 18,000 RPM. Changing have between the cutting conditions and the non-
the rotation speed has a proportionally straight relation to the feed rate. For uniformity of the wood pieces, it is important to
example, if your tool is rotating at 12,000 RPM, you have to decrease the feed understand that these values are only
rate by the relation of 12,000/18,000. Cutting depth or wood thickness is given recommendations. Wood fiber direction, wood type,
with values which relate to the diameter. For example, cutting diameter is wood humidity, clamping stiffness, machine
10mm and wood thickness is 20mm, so it becomes a cutting depth of 2xD. stiffness, etc., all these variables together or one
by one can change the cutting condition.
How to get a feed rate value from the chart It is recommended that in any new application, you
reach the recommended feed rate gradually and if
1. Choose the correct chart according the cutting quality is OK, you can continue to
to the tool family and the wood type. increase the feed rate values.
2. Locate your line on the chart Please remember, the larger your chip per tip (high
D
according to diameter size. feed rate), the lifetime of the tool is increased.
3. Evaluate your cutting depth according Cutting depth
to the cutting diameter – is it equal to
1xD or 2xD or 1.5xD, etc.
4. Find the right feed rate according
to the wood thickness on the chart.
Solid Carbide Spiral W/Chipbreaker Solid Carbide Spiral Flute Plunge Spiral Flute Plunge Solid Carbide
Router Bit Technical Information
46132 46214
Refer to page 17. Refer to page 14. Refer to page 13.
All router bits are carbide-tipped unless stated otherwise.
184
Solid Carbide Spiral Roughing Compression Spiral Compression Spiral
w/Chipbreaker for Solid Wood for MDF/Laminate
46132 46390
Refer to page 17. Refer to page 17. Refer to page 15.
Router Bit Technical Information
All router bits are carbide-tipped unless stated otherwise.
Spiral Flute Plunge Spiral Flute Plunge
for Solid Wood for Solid Wood
Refer to page 14. Refer to page 14.
www.amanatool.com 185
Router Bit Technical Information
Al
Always refer
f tto your power ttooll owner’s
using your router & router bits.
’ manuall prior
i tto
Al
Always wear eye & hhearing
of cutting area.
i protection.
t ti KKeep clothing
l thi clear
l
All router bits are carbide-tipped unless stated otherwise.
N
Never exceedd th
the recommended d d RPM ffor th
the router
t bit
reference chart online http://www.amanatool.com/maxrpm
bit. SSee
Checkk th
Ch the router
t collet
ll t periodically
i di ll ffor wear.
Never use a large diameter bit in a handheld router. Refer
to Amana Tool® website & catalog for guidelines.
Plan th
Pl the cutting
tti path
th tto avoid
id cutting
tti ththe power cord.
d
For up to date Safety Guidelines in English, French and Spanish visit
www.amanatool.com/safety
For Router Bits
Always use a guardd andd a ffence while
Al hil routing.
ti
S
Secure the router
th t motor
to the power outlet.
t iin th
the bbase bbefore
f plugging
l i it iin
Router Bit Technical Information
All router bits are carbide-tipped unless stated otherwise.
M k certain
Make t i th
thatt th
the power switch
it h iis iin th
the “OFF”
position before connecting the router to the power source. Make certain
t i th
thatt th
the stock
t k iis ffree off warp, twist, nails,
screws, staples, grit or any other foreign object.
DDothennotback
t bbottom-out
tt t th
the bit iin th
the collet;
ll t iinsertt th
the bit ffully
it out 1/8" or to stop line I, when available.
ll andd
AlAlways
use ffeatherboards
th b d tto hhold
the table and fence.
ld th
the workpiece
k i fifirmly
l tto
Never start the router with the router bit in contact with
the stock/workpiece. AlAlways
use ““pushh bl
blocks”
your hands from the bit.
k ” andd ““pushh sticks”
ti k ” tto di
distance
t
For up to date Safety Guidelines in English, French and Spanish visit
www.amanatool.com/safety www.amanatool.com
For Router Bits
CORRECT WAY TO ROUT WORKPIECE
MATERIAL FEED
DO NOT ATTEMPT CLIMB CUTTING
ROUTE ENDGRAIN FIRST MATERIAL FEED
Push the router in a counter-clockwise direction for
external cuts and clockwise for internal cuts. Never "climb" cut. Always feed the workpiece against the
rotation of the bit.
Router Bit Technical Information
Avoid routing small stock. Shape a larger workpiece and
then reduce it in size. If you must shape a small piece use AlAlways
plan
l tto route
t iin severall passes tto achieve
hi th the fifinall profile.
Do not force the bit into the workpiece. If the router is straining
fil
a jig or large wooden clamp to grasp the stock. or becomes overloaded the cut is too heavy or bit is dull.
All router bits are carbide-tipped unless stated otherwise.
UUse
a jijig or miter
stock.
it gauge when
h shaping
h i endd off narrow
RReduce
d the ffence opening
th i as muchh as possible
ibl iin order
d tto provide
support for the workpiece. When using large diameter bits, such
id
as a raised panel bit, make a zero-clearance fence opening.
UUse
a starting
t ti pini when
use of a template.
h shaping
h i curvedd stock
t k without
ith t th
the
Wh
When shaping
h i curvedd stock
t k with
ith a ttemplate,
l t extend
t d ttemplate
l t
beyond the workpiece so that the template contacts the guide
bearing before workpiece contacts the bit.
For up to date Safety Guidelines in English, French and Spanish visit
www.amanatool.com/safety
r
! Warning: Before use, read router bit safety guidelines on pages 186-188.
Index
SET Dust Flat Lock Collar w/ Collar Set Snap Hex
Tool No. Page # Bearing(s) Screw Screw Shield Washer Washer Set Screw Screw Only Ring Nut
DRB-400 34,35 47706 — 67018 — — — — — — —
MR0100 to MR0114 56 47775 — — — 67129 — — — — 67135
RC-1000 to RC-1006 35 47711 — 67176 (3) — — — — — — —
RC-1008 to RC-1012 41 47712 — 67115 (3) — — — — — — —
RC-1014 41 47701 — 67115 (3) — — — — — — —
RC-1230 33 — — — — — — — — — —
RC-2000 34, 35 47706 67016 (2) 67018 — — — — — — —
RC-2400 33 — — — — — — — — — —
RC-45226 3, 97 — — 67013 — — — — — — —
RC-45910 62, 97 47701 — — — — — — — — —
RC-47104 34, 97 47706 67013 (2) 67011 — — — — — — —
RC-49104 79, 97 47706 — 67011 — — — — — — —
RC-49300 92, 97 47706 — 67011 — — — — — — —
RC-49355 94 — 67094 67094 — 67202 — — — — —
RC-49360 94 See Page — 67094 — 67202 — — — — —
RC-49496, RC-49504 72, 97 47706 — 67011 — — — — — — —
RC-54111 97 47706 — 67011 — — — — — — —
44100 22 47706 (2) — — 67098 — — — — — 67086
45360 to 45364 32 47721 — — — — — 47739 — — —
45460, 45461 32 47701 — — — — — 47724 67091 — —
45460-S 33, 129 47701 — — — — — 47724 67091 — —
45462 32 47712 — — — — — 47724 67091 — —
45462-S 33 47712 — — — — — 47724 67091 — —
45463 32 47721 — — — — — 47739 67091 — —
45464 32 47714 — — — — — 47724 67091 — —
45464-S 33 47714 — — — — — 47724 67091 — —
45465 32 47721 — — — — — 47739 67091 — —
45466 32 47722 — — — — — 47730 67091 — —
45467 32 47754 — — — — — 47739 67091 — —
45468 32 47738 — — — — — 47740 67091 — —
45469 to 45470 115 47712 — — — — — 47724 — — —
45474-S 33 47753 — — — — — 47724 — — —
45475 32 47751 (2) — — — — — 47764 — — —
45475-S 33 47751 (2) — — — — — 47764 — — —
45476, 45478, 45479 115 47712 — — — — — 47724 — 47752 —
45481 32, 129 47701 — — — — — 47724 — — —
45482 to 45483 32 47712 — — — — — 47724 67091 — —
45484 33 47714 — — — — — 47724 — — —
45485 32 47714 — — — — — 47724 67091 — —
45487, 45491 32, 129 47701 — — — — — 47724 — — —
45489-S 33 47701 — — — — — 47724 — — —
45495 33 47701 — — — — — 47724 — — —
45496 33 47714 — — — — — 47724 — — —
45499 32 47741 — — — — — 47730 — — —
45550, 45551 32 47738 — — — — — 47724 — — —
45561 31 47714 — — — — — 47724 67091 — —
45563 31 47721 — — — — — 47739 67091 — —
45565 31 47754 — — — — — 47740 67091 — —
45567 31 47758 — — — — — 47740 67091 — —
45582 30 47701 — — — — — 47724 67091 — —
45584 30 47712 — — — — — 47724 67091 — —
Replacement Parts & Accessories
45586 30 47714 — — — — — 47724 67091 — —
45590 30 47756 — — — — — 47740 67091 — —
45668, 45676 129 47701 — — — — — 47724 — — —
45669 129 47714 — — — — — 47724 — — —
45672, 45678 129 47712 — — — — — 47724 — — —
45674 129 47708 — — — — — 47724 — — —
45750, 45950 55 47701 — — — — — 47724 — — —
45788 57 47738 — — — — — 47740 — — —
45850 113 47701 — — — — — 47724 — — —
45852 113 47701 — — — — — 47739 — — —
45880 to 45882 115 47712 — — — — — 47724 — — —
45884 115 47741 — — — — — 47724 — — —
45983 60 47701 — — — — — 47724 67091 — —
45988 60 47714 — — — — — 47724 67091 — —
45990 60 47721 — — — — — 47739 67091 — —
45992 60 47738 — — — — — 47740 67091 — —
46192 40 47706 (2) — — — — — — — — 67086
46300 to 46304 39, 166 47706 (2) — 67096 67098 — — — — — 67086
46400, 46404 39, 166 47706 (2) — — — — — — — — 67086
47090 to 47092 34 47723 — 67134 — — — — — — —
47093 34 47702 — 67096 67100 67202 — — — — —
47094 37 47706 (L) & 47701 (U) — 67109 — 67101 — 47724 — — —
47096 37 47714 (L) & 47721 (U) — 67109 — 67101 — 47739 — — —
47100 to 47103 34 47702 — 67096 67100 67202 — — — — —
47104, 47106, 47108, 47110, 47112, 47114 34 47706 — 67096 67098 67202 — — — — —
47105, 47109, 47111, 47113 36 47706 — — — — — — — — —
47115 36 47702 — 67096 67100 67102 — — — — —
47116, 47117, 47118, 47120 34 47706 — 67096 67098 67202 — — — — —
47118-2 34 47706 (2) — 67096 67098 67202 — — — — —
47124 to 47129 36 47706 — 67096 67098 67202 — — — — —
47124-2 to 47128-2 36 47706 (2) — — 67098 67202 — — — — 67118
47130, 47134, 47135, 47136, 47138 37 47714 — 67109 — 67101 — — — — —
47131 36 47706 — 67109 67098 67101 — — — — —
47140 to 47141 34 47714 — 67109 67101 — — — — — —
47144 22 47706 — 67096 67098 67202 — — — — —
47150 to 47154 36 47704 — 67095 67100 67124 — — — — —
47160 to 47162 40 47706 — — — — — — — — —
47174 38, 129 47706 — — — — — — — — —
47180 36 47712 — 67109 — 67101 — — — — —
47182 to 47184 36 47714 — 67109 — 67101 — — — — —
47190 to 47194 40 47718 — 67096 67098 67101 — — — — —
47200 to 47204 41 — — 67096 67098 67202 — — — — —
47206 41 47704 — 67096 67100 67082 — — — — —
47210 41 47706 — 67109 67098 67202 — — — — —
47300 to 47304 41 47716 — 67096 67098 67202 — — — — —
47400, 47404 42 47708 — — — 67204 — — — — 67088
49092 to 49119 79 47704 — 67095 67100 67200 — — — — —
49120 to 49122 79 47706 — 67096 67098 67202 — — — — —
49200 to 49206 81 47704 — 67096 67098 67202 — — — — —
49207 81 47706 — 67096 67098 67202 — — — — —
49208 to 49214 77 47704 — 67095 67100 67200 — — — — —
49300 to 49302 92 47706 — 67096 67098 67202 — — — — —
49310 93 47706 — — — — — — — — —
49340 to 49350 92 see page — — — — — — — — —
49360 94 47701 (2) — 67094 — 67202 — — — — —
49400 to 49402 69 47704 — 67095 67100 67200 — — — — —
49404 69 47706 — 67096 67098 67202 — — — — —
49405 69 47710 — 67093 — 67101 — — — — —
49406, 49407, 49408, 49410 69 47706 — 67096 67098 67202 — — — — —
49409 172 47718 — 67096 67098 67101 — — — — —
49412 69 47704 — 67095 67100 67200 — — — — —
Industrial Quality
49414 to 49416 69 47706 — 67096 67098 67202 — — — — —
49440 101, 158 47702 — 67096 67101 67202 — — — — —
49442 101, 158 47701 — — — — — 47724 67091 — —
49492 to 49502, 49504 to 49506, 49508 to 49526 72 47706 — 67096 67098 67202 — — — — —
49503, 49507 75 47706 — 67096 67098 67202 — — — — —
49528 75 47706 & 47790 — 67011 — — — — — 67176 —
49529 75 47721 & 47792 — 67011 — — — — — 67176 —
49530 138 47706 — 67096 67098 67101 — — — — —
49532 138, 219 47706 — 67096 67098 67101 — — — — —
49534 138, 143 47706 — 67096 67098 67101 — — — — —
49535, 49536, 49537, 49538 138 47706 — 67096 67098 67101 — — — — —
49540 to 49554, 49556, 49558, 49560 108 47706 — 67096 67098 67202 — — — — —
49555, 49557, 49559, 49561, 49563 109 47718 — 67096 — 67202 — — — — —
49562 160 47706 — 67096 67098 67202 — — — — —
49592 to 49622 73 47702 — 67096 67101 67202 — — — — —
49640, 49664, 49674 101, 158 47702 — 67096 67101 67202 — — — — —
190 r
! Warning: Before use, read router bit safety guidelines on pages 186-188.
Index
SET Dust Flat Lock Collar w/ Collar Set Snap Hex
Tool No. Page # Bearing(s) Screw Screw Shield Washer Washer Set Screw Screw Only Ring Nut
49642, 49666, 49676 101, 158 47701 — — — — — 47724 67091 — —
49644, 49650, 49660, 49670 158 47702 — 67096 67101 67202 — — — — —
49646, 49652, 49662, 49672 158 47701 — — — — — 47724 67091 — —
49730 71 47708 — — — — — — — — 67088
51420, 51422 27 47723 — 67134 — — — — — — —
51430 27 47723 (2) — 67134 — — — — — — —
51432 27 47706 — 67011 — — — — — — —
51520, 51522 27 47723 — 67134 — — — — — — —
51530 84 47716 — 67096 67098 67202 — — — — —
51565 to 51570 76 47706 — 67096 67098 67202 — — — — —
51572 76 47716 — 67096 67098 67202 — — — —
51574 to 51576 76 47714 — 67093 67126 — — — — — —
51586 84 47712 (2) — — — — — — — — —
53600 118, 152 47708 — — — 67204 — — — — —
53610 119 47708 — — — — — — — — 67088
53630 157 47708 — 67090 — — — — — — —
54100 78 47706 — 67096 67098 67202 — — — — —
54102 to 54108 78 47706 — 67096 67098 67101 — — — — —
54110, 54112, 54114 81 47706 — 67096 67098 67101 — — — — —
54113 140, 143 47706 — 67096 67098 67101 — — — — —
54116 140 47706 — — — — — — — — —
54117 140 47706 — 67096 67098 67202 — — — — —
54118, 54121 141 47706 — 67096 67098 67202 — — — — —
54119 141 47706 — — — — — — — — —
54120, 54122 to 54126 86 47706 — 67096 67098 67202 — — — — —
54127 81 47706 — 67096 67098 67202 — — — — —
54128, 54130, 54132, 54134, 54135 78 47706 — 67096 67098 67202 — — — — —
54131 151 47706 — 67096 67098 67101 — — — — —
54133 153 47706 — 500-10 — — — — — — —
54136, 54138, 54140 to 54142 85 47706 — 67096 67098 67202 — — — — —
54144 to 54150 80 47706 — 67096 67098 67202 — — — — —
54160 to 54162 77 47706 — 67096 67098 67202 — — — — —
54163 77, 152 47706 — 67096 67098 67202 — — — — —
54164 to 54172 77 47716 — 67096 67098 67202 — — — — —
54173, 54175 151 47706 — 67096 67098 67101 — — — — —
54180 to 54182 85 47706 — 67096 67098 67202 — — — — —
54186 88 47706 — 67096 67098 67202 — — — — —
54188 88 47716 — 67096 67098 67082 — — — — —
54190, 54192 87 47712 (2) — 67109 — — — 47724 67091 — —
54198 107 47702 — 67096 — 67100 — — — — —
54200 107 47706 — 67096 — 67100 — — — — —
54204 104 47706 — 67096 67098 67202 — — — — —
54211, 54213, 54217 91 47716 — 67096 67103 67202 — — — — —
54218 to 54220 104 47706 — 67096 67098 67202 — — — — —
54221 142 47713, 47763 — — — — — — — — 67088
54222 to 54224 105 47706 — 67096 67098 67202 — — — — —
54227 142 47713, 47763 — — — — — — — — 67088
54229 142 47713, 47763 — — — — — — — — 67088
54232 106 47712 — — — — — — — — —
54234 105 47716 — 67096 67103 67202 — — — — —
54246 157 47776 — 67090 — 67101 — — — — —
Replacement Parts & Accessories
54260 106 47706 — 67096 67098 67202 — — — — —
Industrial Quality
54262 110 47706 — 67096 67098 67202 — — — — —
54266 101, 106 47706 — 67096 67098 67202 — — — — —
54268 to 54269 110 47716 — 67096 67103 67202 — — — — —
54278 141 47706 — 67096 67098 67101 — — — — —
54286 106, 156 47712 — 67096 67103 67202 — — — — —
54288 106 47706 — 67096 67098 67202 — — — — —
54292 78 47706 — 67096 67098 67202 — — — — —
54294 91 47716 — 67096 67098 67202 — — — — —
54296 89 47712 (2) — 67096 67098 67202 — 47724 — — —
54299 99 47706 — 67014 — — — — — — —
54302 to 54308 90 47706 — 67096 67098 67202 — — — — —
54322 89 47706 — 67096 67098 67202 — — — — —
54324 89 47712 — 67096 67103 67202 — — — — —
54330 to 54332 90 47701, 47706 — 67096 67098 67202 — 47724 — — —
54350 to 54356 100 47716 — 67096 67103 67202 — — — — —
55312 to 55314 42 47727 — — — 67204 — — — — 67088
55320 to 55330 127 47708, 47762 — — — — — — — — 67088
55340 126 47708 — — — — — — — — 67088
55343 126 47708 — — — — — — — — 67088
55350, 55370, 55380 135 47708 — — — — — — — — 67088
55360, 55362 150 47759 — — — — — — — — 67088
55392 120 47736 — — — — — — — — 67088
55400, 55401 125 47708 (2) — — — — — — — — 67088
55407, 55408 125 47708 — — — — — — — — —
55420, 55430, 55440 134 47708 — — — — — — — — 67088
55421, 55431, 55441 133 47708 — — — — — — — — —
55426 153 47708 — — — — — — — — 67088
55428 143 47706 — 67096 67098 67101 — — — — —
55432, 55433, 55436, 55437, 55438, 55439 131 47708 — — — — — — — — —
55454, 55456 128 47706 — 67096 — 67101 — — — — —
55460, 55462, 55464 137 47744(2) — — — 67125(2) — — — — 67131
55466 123 47720 (2) — — — — — — — — —
55468 123 47720, 47718 — — — — — — — — —
55500, 55510 116 47738 — — — — — — — — —
56130 64 47708 — — — — — — — 47748 —
56140 64 47734 — — — — — — — 47750 —
56148 65 47708 — — — — — — 67091 47748 —
56150 65 47734 — — — — — — 67091 47750 —
57118 to 57120 162 47709 — 67109 — 67101 — — — — —
57122 to 57126 170 47726 — 67093 67126 67101 — — — — —
57127 169 47707 — 67096 — 67202 67101 — — — —
57128 170 47726 — 67093 — 67101 — — — — —
57129 173 47732 — 67146 — — — — — — —
57130 170 47726 — 67093 67126 67126 — — — — —
57138, 57140 164 47737 — 67091 — — — 47740 67091 — —
57139, 57141 164 47707 — 67096 — 67202 — — — — —
57146, 57148 162 47707 — 67096 67098 67202 — — — — —
57147, 57149 to 57152 164 47707 — 67096 — 67202 — — — — —
57153 165 47726 — 67109 67103 67101 — — — — —
57154 165 47709 — 67146 — 67101 — — — — —
57155 165, 172 47133 — 67146 — 67101 — — — — —
57156, 57158, 57160, 57162 171 47731 — 67146 — — — — — — —
57159 165 47777 — 67023 — — — — — — —
57161 173 47732 — 67146 — — — — — — —
57165 168 47745, 47747 — — — 55371 — 47739 — — —
57166 168 47749 — — — 55363 — 47739 — — —
57168 171 47731 — 67146 — — — — — — —
57169 172 47733 — 67146 — — — — — — —
57170 163 47774 — 67146 — — — — — — —
57184 to 57186 34, 166 47714 — 67109 67116 — 67128 — — — —
57187 34, 166 47714 & 47721 (2) — 67109 — — — 47740 — — —
57190 74, 163 47767 — 67109 — 67101 — — — — —
57191 74, 163 47766 — — — — — — —
57192 74, 163 47768 — 67109 — 67101 — — — — —
57194 74, 163 47769 — 67109 — 67101 — — — — —
57200 174 47709 — 67109 67116 67101 — — — — —
57202, 57208, 57210 175 47709 — 67109 67116 67101 — — — — —
57214 to 57218 176 47709 — 67109 67116 67101 — — — — —
57220 177 47707 — 67096 — 67202 — — — — —
57232 169 47737 — — — — — 47740 — — —
57238 177 47712 — 67096 67103 67202 — — — — —
57242 to 57246 178 47707 — 67096 — 67082 — — — — —
57248 179 47709 — 67109 67116 67101 — — — — —
57252 to 57254 179 47707 — 67096 — 67101 — — — — —
57257 180 47709 — 67109 — 67101 — — — — —
57258 177 47707 — 67096 — 67082 — — — — —
r
! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 191
Steel Ball BearIng guIdeS
Amana Tool® uses only the finest industrial quality precision
ball bearings available. Bearings are double steel-shielded
for extra rigidity and to inhibit dust. A special high-performance,
high-temperature grease is used for maximum life.
Bearing #’s 47701-HP, 47706-HP and 47712-HP have Teflon®
shields which provide a better seal and increased bearing life
while routing materials that generate very fine dust particles
(such as solid surface).
Note: Solvents should not be used to clean ball bearings,
as this will deteriorate the special grease.
‘Frozen’ bearings (ones that do not rotate freely),
should be replaced immediately.
Fractional Listed By Size/Steel Shields & New Teflon ® Shields
Application Ød ØD B Tool No.
47090, 47092, 1/4" Diameter Trim Bits 1/8 1/4 .110 (7/64) 47723
47206, 49400, 49402, Smaller Cove Bits, Several Types Of Form Bits, 1/8 3/8 .155 (5/32) 47704
Old Style 3/8" Diameter Trim Bits, New ‘No-File’ Trim Bits
Old Style 1/2" Diameter Flush Trim Bits 1/8 1/2 .171 (11/64) 47700
3/8" Diameter Flush Trim, All Beading Bits, (49300/49302), 49340, 49350, 3/16 3/8 .124 (1/8) 47702
d
Replacement Parts & Accessories
49540, 49542, 49550, Many Types Of Form Bits
D Our Most Popular Bearing – Fits 1/2" Diameter Flush Trim, Some Bevel Trim, 3/16 1/2 .195 (3/16) 47706
All Corner Rounds, Raised Panel, Rabbet, Ovolo, Many Types Of Form Bits,
51570, 54160, 54162, 54198, 54370, New Style 54200 & 54220 (After 12/95)
With Teflon® Dust Shields Used As A Substitute For 47706 (See Above) 3/16 1/2 .195 (3/16) 47706-HP
For Fine Dust Conditions
New Undersized 1/2" Diameter Bearing For Use After Resharpening – Fits All Tools 3/16 .490 .195 (3/16) 47715
Such As Flush Trims, Corner Rounds, Etc., That Use The Standard 47706 Bearing
‘Overhang’ Bits, 49340, 49350 (49300/49302), 55343 3/16 5/8 .195 (3/16) 47718
B (49300/49302), 49340, 49350, Rc-4950 3/16 3/4 .280 (9/32) 47720
49340, 49350 For 1/4" Rabbet 3/16 7/8 .196 (3/16) 47719
3/16 1 47753
49340, 49350 For 1/8" Rabbet 3/16 1-1/8 .312 (5/16) 47743
45475, 45475-S 1/4 3/8 .124 (1/8) 47751
45460, 45461, 45750, 45850, 45950, 57100, 57106, 57112, RC-1014. 1/4 1/2 .186 (3/16) 47701
With Teflon® Dust Shields Used As A Substitute For 47701 (See Above) 1/4 1/2 .186 (3/16) 47701-HP
For Fine Dust Conditions
45462, 45476, 45478, 45479, 45809, 45811, 47180, 51530, 51532, 51534, 1/4 5/8 .195 (3/16) 47712
54188, 54190, 54192, 54194, 54296, 54324, 54350, 54352, 54354, 54356,
57100, 57106, 57112, ‘RC’ Series Bevel Trim Bits
With Teflon® Dust Shields Used As A Substitute For 47712 (See Above) 1/4 5/8 .195 (3/16) 47712-HP
For Fine Dust Conditions.
45464, 45988, 47140, 47182, 47184, 51574, 51576, 57100, 57106, 57112, 1/4 3/4 .280 (9/32) 47714
Old Style 57118, 57120
49405 1/4 1 .344 (11/32) 47710
55360 5/16 3/4 .280 (9/32) 47759
1/2" Depth Of Cut Slotting Assemblies, All Stile & Rail, 49730, 49770, 53610 5/16 .865 (7/8) .275 (9/32) 47708
55400, 55401, 56148, 55340
TRS-310 (Timberline®) 5/16 1 1/4 47770
TRS-310 (Timberline®) 5/16 1-1/8 1/4 47771
New Raised Panel With Back Cutter 54221, 54227, 54229 5/16 1-1/4 .196 47763
TRS-310 (Timberline®) 5/16 1-3/8 1/4 47772
55320, 55330, 55325 5/16 1.319 (1-5/16) .335 (21/64) 47762
45884, 45499 3/8 7/8 7mm 47741
Industrial Quality
45463, 45465, 45990 1/2 3/4 .156 (5/32) 47721
45468, 45789, 45992, 51590, 57142, 57144, 57138 & 57140 1/2 1-1/8 .312 (5/16) 47738
57165 1/2 1 5.7mm 47745
57165 1/2 1-1/4 5.7mm 47747
57166 1/2 1-1/2 .500 (1/2) 47749
Note: Fractional size specifications shown in parentheses ( ) are approximate, and are provided for reference purposes only.
Tool numbers shown in parentheses ( ) exhibit optional (not standard) bearings for these tools.
Tool illustrations not shown at actual size.
192 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
Steel Ball BearIng guIdeS
Metric Listed By Size/Steel Shields
Application Ød ØD B Tool No.
New Miniature Router Bits 4mm 8mm 3mm(7/64) 47703
Old Style (Prior To 12/95) 54200, 54220 – For New Style (After 12/95) Use 47706 5mm 13mm 4mm(5/32) 47705
47300, 47302, 51572, 54164 Through 54172, 54215, 5mm 16mm 5mm(3/16) 47716
54217, 54268, 54269, 54294, 57188, RC-4952, RC-4954, RC-4956
‘RC’ Series Flush Trim Bits 6mm 19mm 6mm(15/64) 47711
RC-1040, RC-1042, RC-1044 7mm 14mm 5mm(3/16) 47746 d
New Raised Panel With Back Cutter 54221, 54227, 54229 8mm 16mm 5mm(3/16) 47713 D
49750, 55392 8mm 28mm 9mm(23/64) 47736
45466 10mm 26mm 8mm(5/16) 47722
56140, 56150, 56158 15mm 35mm 11mm(7/16) 47734
45467 15mm 1 .218 (7/32) 47754
45469 15mm 1-1/4 .343 (11/32) 47756
45470 15mm 1-1/2 .343 (11/32) 47758
TRS-310 (Timberline®) 15mm 2 13mm 47760
Note: Fractional size specifications shown in parentheses ( ) are approximate, and are provided for reference purposes only. B
Tool numbers shown in parentheses ( ) exhibit optional (not standard) bearings for these tools.
20 pIece replacement BearIng kIt
Replacement Parts & Accessories
Industrial Quality
This 20 piece replacement bearing kit contains the most popular bearings
to fit our most popular router bits.
Description Tool No.
20 Piece Replacement Bearing Kit 6004
Includes the following sizes:
Ø I.D. x Ø O.D. ‘B’ Bearing Thickness Qty. Tool No.
1/8 x 1/4 .110 (7/64) 2 47723
1/8 x 3/8 .155 (5/32) 3 47704
Includes handy plastic storage box.
3/16 x 3/8 .124 (1/8) 5 47702
3/16 x 1/2 .195 (3/16) 5 47706
1/4 x 1/2 .186 (3/16) 3 47701
1/2 x 3/4 .156 (5/32) 2 47721
d
D
Tool illustrations not shown at actual size.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 193
ultra-glIde™ HIgH-performance
Ball BearIng guIde aSSemBlIeS
Using the same quality standards as our regular steel bearings, these
Ultra-Glide™ bearing assemblies feature satin-smooth Delrin® sleeves. Delrin®
is an industrial synthetic plastic material similar to nylon, and will leave no
marks on the material being cut. Applications include solid-surface materials
such as Gibraltar,® Corian,® Surell® & Fountainhead.® etc.; Plexiglas® & other clear
acrylics; and plastic laminates. Not recommended for regular wood applications
due to a higher wear factor. Product #’s 47709, 47725, 47726, 47731 & 47733
now include new Teflon® dust shields. These bearings provide a better seal to
increase bearing life while routing materials that generate very fine dust
particles (such as solid surface).
Application Ød ØD a°/ R Tool No.
1/2" Diameter Flush Trim, Corner Rounds, Etc. 3/16 .500 -0- 47707
All Tools That Accept Our Regular #47706 Steel Bearing (1/2)
47140, 57154 Trim Bits And 1/4 .750 -0- 47709*
New Style 57118, 57120, 57257 (3/4)
Slot Cutter Assemblies: 5/16 1.382 -0- 47727
1/4" Depth Of Cut, 53610 (1-3/8)
Slot Cutter Assemblies: 5/16 1.137 -0- 47728
3/8" Depth Of Cut, 53610 (1-9/64)
Set Of Two Above: 47727 & 47728 5/16 -0- 47729
d
Old Style 57122 Bevel Bit 1/4 .965 10° 47725*
D
With 31/32" Large Diameter (31/32)
New Style 57122, 1/4 .866 (7/8) 10° 47726*
Other ‘Solid-Surface’ Type Bits
57156 Through 57168 Bowl Bits Only 1/4 .866 (7/8) 10° 47731*
Replacement Parts & Accessories
57129 And 57161 1/4 1 12° 47732*
New Bowl Bits 1/4 1 5° 47733*
a°
57138, 57140 15mm 1.125 -0- 47737
(1-1/8)
57191 1/4 15/16 3/8 47766
57190 1/4 27/32 1/2 47767
57192 1/4 3/4 3/4 47768
57194 1/4 3/4 1 47769
Note: Outside dimensions are approximate and are given for reference purposes only.
* Includes new Teflon® dust shields.
Steel duSt SHIeldS
Application: Used between ball bearing and router bit to inhibit dust.
‘Cone-shaped’ end always faces the bearing.
Diameters
‘d’ Inside x ‘D’ Outside Use with Bearing # Tool No.
3/16 X 1/2 47700, 47701, 47706, 47712, 47714, 47718, 47720 67098
1/8 X 3/8 47704 67100
5mm X 16mm 47716 67103
1/4 X 5/8 47712 (Solid Surface Bowl Bits Only) 67116
3/16 X 5/8 47712 (Solid Surface Bowl Bits Only) 67126
Industrial Quality
Tool illustrations not shown at actual size.
194 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
router arBorS
With Hex Nut And Washers
Application ØD Ød A B C Tool No.
2 & 3-Wing Slotting Assemblies, 5/16-24 NF 1/4 1-1/4 7/8 2-3/8 47600
Assemblies, And Single 5/16-24 NF 3/8 1-1/4 7/8 2-3/8 47602
4-Wing Trim Cutter Assemblies 5/16-24 NF 1/2 1-1/2 7/8 2-3/8 47604
Shorter Length Than 47600 5/16-24 NF 1/4 1-1/4 5/8 2-1/8 47606
Double Trim Cutters, Rail & Stile, 5/16-24 NF 1/2 1-1/2 1-3/8 3-1/8 47612
53600, 55300, 55320, 55325,
55330, 55400 (Replaces 55360 Arbor)
49730, 49770 5/16-24 NF 1/2 1-7/16 2-9/16 4-3/16 47618
49750, 55340, 55392 5/16-24 NF 1/2 1-3/8 2-1/8 3-3/4 47620 C
55420, 55430, 55440 5/16-24 NF 1/2 1-5/16 1-3/4 3-5/16 47622
General Purpose 1/4-28 NF 1/4 1-1/4 7/8 2-3/8 47610 d D
Screw Type Mortising Bits 1/4-28 NF 1/4 1-7/16 1/4 1-13/16 47611 *
55250 Through 55258
A B
Screw Type Mortising Bits 1/4-28 NF 1/2 1-3/4 1/4 1-1/2 47614 *
55250 Through 55258
* Due to application, these arbors are not furnished with hex nut or washers.
Hex nutS for router arBorS
Application Description Tool No.
46300, 46304 Spiral Trim Bits 10-32 NF 67086
All Arbors With 5/16-24 NF Thread 5/16-24 NF 67088
Replacement Parts & Accessories
Industrial Quality
47610 Arbor, “Nova” 1/4-28 NF 67089
47124-2, 47126-2, 47128-2 Trim Bits 5mm X .8mm (10-32) 67118
55460, 55462, 55464 12mm X 1.75mm 67131
Steel flat WaSHerS
Application: Used between ball bearing & screw head or hex nut. Part No. 67101
is used in place of a dust shield on beading bits #’s 49592 through 49622.
Diameters Use with
‘d’ Inside x ‘D’ Outside Bearing # Use with Screw # Tool No.
3/16 X 5/16 47702 67094, 69096 67101
12mm X 18.7mm 47744 55460, 55462, 55464 67125
1/4 X 3/8 47701 ‘Face Inlay’ Spacer 67132 d D
3/32 X 1/4 47704 67095 67200
1/8 X 5/16 47706 67094, 67096 67202
5/16 X 1/2 47708 5/16 Thread Arbors (For Slot Cutters) 67204
1/4 X .356 47701 ‘Superabbet’ Spacer 67206
Steel SplIt lock WaSHerS
Application: Used between ball bearing & screw head or hex nut to serve as
a lock washer.
Diameters
‘d’ Inside x ‘D’ Outside Tool No.
1/8 X 1/4 67082 d D
1/8 X 1/4 67111
1/8 X 1/4 67124
12mm X 18.7mm 67128
Tool illustrations not shown at actual size.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 195
Steel SpacerS
Application: General purpose arbor spacers used on assembly type tools that
require cutter adjustment.
d D
Diameters: ‘d’ Inside x ‘D’ Outside ‘B’ Face Width Tool No.
5/16 x 5/8 3.0mm(1/8) 55366
5/16 x 5/8 3.4mm(9/64) 55367
5/16 x 5/8 6.0mm(1/4) 55368
B 5/16 x 5/8 5.5mm(7/32) 55369
1/2 x 3/4 6.0mm(1/4) 55363
1/2 x 18mm 5.0mm 55371
8 pIece Spacer Set
Diameters:
‘d’ Inside x ‘D’ Outside ‘B’ Shim Thickness Description Qty. Tool No.
1-1/4 x 1-31/32 7.1mm (.2797) 0.1mm(.0040) 2pc. 67208
0.2mm(.0078) 2pc.
0.5mm(.0197) 1pc.
1.0mm(.0393) 1pc.
2.0mm(.0788) 1pc.
3.0mm(.1182) 1pc.
Replacement Parts & Accessories
Steel SHImS
Application: General purpose arbor shims used on assembly type tools that require
cutter adjustment. Particularly useful after tool re-sharpening.
B
Diameters: ‘d’ Inside x ‘D’ Outside ‘B’ Shim Thickness Tool No.
5/16 x 5/8 .05mm(.002) 55356
d 5/16 x 5/8 .10mm(.004) 55357
32mm x 3/4 .18mm(.007) 55358
5/16 x 5/8 1.00mm(.040) 55402
5/16 x 5/8 .50mm(.020) 55404
5/16 x 5/8 .40mm(.015) 55403
Ball BearIng retaInIng collarS
and Snap rIngS
Application: To retain bearings on tools furnished with upper ball bearing guides.
Collars include #67091 set screw.
Diameters: ‘d’ Inside x ‘D’ Outside Used On Tool No. (’s) Tool No.
Snap Rings .289 x .375 56130, 56148, 49150, 49152, 49154 47748
.542 x .675 56140, 56150 47750
Diameters Face
‘d’ Inside x ‘D’ Outside Thickness Used On Tool No.(’s) Tool No.
1/4 x 7/16 .203 (13/64) 45460, 45461, 45462, 45464, 47724
45750, 45850, 45950, 45988,
Industrial Quality
54190, 54192, 54194
Retaining Collars 3/8 x 5/8 .203 (13/64) 45466 47730
1/2 x 23/32 .234 (15/64) 45463, 45465, 45467, 45991 47739
1/2 x 25/32 .234 (15/64) 45468, 45469, 45470, 45990, 45992, 47740
51592, 57138, 57140, 57142, 57144
9.5 x 6.3 1/4 45475, 45475S 47764
Tool illustrations not shown at actual size.
196 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
allen-type Set ScreWS
flat (fp) & cup-poInt (cp) Slotted
Case Hardened • Black-Oxide Finish
Application Description Use With Key Size Tool No.
Boring Bits 5mm x .8mm (FP) S/D Slotted* 67007*
Rosette Cutterheads 6mm x 1.0mm (FP) 3mm (#5008) 67008 Allen
RC-3100 3 x 4mm Special (FP) 1.5mm (#5000) 67015
RC-3200 & 3110 3 x 5mm Special (FP) 1.5mm (#5000) 67016
RC-3204 & 3307 3 x 6mm Special (FP) 1.5mm (#5000) 67017
Metric Countersinks (6mm to 12mm) 6mm x 1.0mm (CP) 3.0mm (#5004) 67079
#55 Countersinks With 1 Screw 6mm x 1.0mm (FP) 3.0mm (#5004) 67083
Metric Countersinks (5mm Only) 5mm x .8mm (CP) 2.5mm (#5007) 67087
47724-47752 Collars #5-40 NC (CP) 1/16 (#5002) 67091
#55 Countersinks With 2 Screws #10-24 NC (CP) 3/32 (#5000) 67092
Metric Chucks 5mm x .8mm (FP) 2.5mm (#5007) 67097
* #67007 Boring bit adjustment screw is screwdriver slotted.
Socket Head
Replacement Parts & Accessories
Industrial Quality
allen type, Hex, flat, torx® and
pHIllIpS® retaInIng ScreWS Allen
Case Hardened • Black Oxide Finish
Application Type Description Use With Key Size Tool No. Phillips®
RC-2000 Allen 3.5 x 6mm 2.5mm (#5007) 67018
‘Mini’ Bits Allen 3 x .5 x 10mm 2.5mm (#5007) 67080
20200 Adj. C/S Allen 4 x .7mm x 12mm 3mm (#5004) 67090
Multi-Use Allen #10-32 x 3/8 NF 5/32 (#5003) 67093 Torx®
Multi-Use Allen #5-40 x 1/2 NC 3/32 (#5000) 67094
Multi-Use Allen #3-48 x 3/8 NC 5/64 (#5001) 67095
Multi-Use Allen #5-40 x 3/8 NC 3/32 (#5000) 67096
Multi-Use Allen #10-32 x 1/2 NF 5/32 (#5003) 67109
Torx® Screw
For Insert Trim & Plunge Bits Torx® 4 X .7mm x 5mm #T-15 (#5005) 67115
Torx® Screw
For Insert Plunge Bits Torx® 3.5 X .6mm x 3mm #T-15 (#5005) 67117
47090 & 47092 1/4 Trim Bits Phillips® #2-56 x 7/32 NC #0 Phillips® 67134
Special Allen #10-32 x 3/8 NF 1/8 (#5009) 67146
Insert Flush Trim Torx® 4mm x 12mm #T-15 (#5005) 67176
In-Tech™ Bits Hex #3-48 x 3/8 NC 5/64 (#5001) 67013
In-Tech™ Bits Flat — — 67099
Tool illustrations not shown at actual size.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 197
allen-type Hex & torx® keyS
Allen Torx® SHort arm
Case Hardened • Black Oxide Finish
Key Screw
Use With Application Type Size #(s) Tool No.
Multi-Use Allen 3/32 67094,67096 5000
Insert Plunge Allen 5/64 (2mm) 67095 5001
47724-47730, 47739 Collars Allen 1/16 67091 5002
Helix Trim & Bowl Bit Allen 5/32 67093,67109 5003
20200 Adj. C/S Allen 3mm 67090 5004
Insert Plunge RC-2000 Allen .050 (1.2mm) 67077 5006
Metric C/S & Chucks Allen 2.5mm 67087,67097 5007
Solid Surface Bits Allen 1/8 67109 5009
Insert Cutterheads Allen 3mm 67142 5012
New Insert Bits RC-2000 Allen 1.5mm 67015,67016, 5011
& RC-3000 Series 67017
Profile Pro™ Cutterheads Allen 4mm 67144 5010
61288, 61292 Torx® *T-25 67154 5025
torx® & allen key
Case Hardened • Black-Oxide Finish
Use With
Application Type Key Size Screw # Tool No.
Allen Torx ®
‘RC’ Series Insert Trim Bits Torx® #T-15 67115 5005
Replacement Parts & Accessories
Insert Cutterheads Torx® #T-9 67160 5090
Rosette Cutterheads – Hex Key Allen 3mm 67008 5008
Hex key / ‘t’- Handle
Case Hardened • Black-Oxide Finish
Use With
Application Type Key Size Screw # Tool No.
Insert Cutterheads-T Handle Allen 2.5mm — 5013
Insert Cutterheads-T Handle Allen 4mm 67144 5014
WrencH Handle
Case Hardened • Black-Oxide Finish
Application Tool No.
EZ Dial™ Slot Cutters 5017
Nova System™ Router Bits 5015
Industrial Quality
Tool illustrations not shown at actual size.
198 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
10 pIece BraSS template guIde Set
Bushings are designed to fit into the router sub-base and guide the router
through curved and complex shapes. Bushings must be used with a template
and the template must be offset to accommodate the bushing diameter. Includes
7 different guides, #ADP-09 adapter and 2 threaded lock collars in a molded
plastic case.
Description Tool No.
10 Piece Template Guide Set BTG-100
Includes the following sizes:
I.D. O.D.
1/4 5/16
9/32 3/8
11/32 7/16
13/32 1/2
17/32 5/8
21/32 3/4
5/8 51/64
BraSS Inlay BuSHIng
Includes both 3/16" & 9/16" O.D. for 1:1 ratio. Threaded lock collar included.
Use #46200 1/8" down-cut spiral (not included).
Description Tool No.
Replacement Parts & Accessories
Industrial Quality
Inlay Bushing BTG-200
9 pIece router template guIde Set
If the sub-base on your router does not accept standard guide bushings and you’d
like to rout with a template then we have the solution. Our universal base will fit
virtually any brand of router. The included centering pins make it easy to center
the base to the router collet. The set come complete with 5 different bushings, a
lock ring, 2 centering pins and mounting screws in a molded plastic case.
Description Tool No.
9-Piece Bushing Set RGB-200
Includes the following sizes:
I.D. O.D.
1/4 5/16
3/8 7/16
17/32 5/8
3/8 7/16 Long)
17/32 5/8 (Long)
router SHank reductIon BuSHIngS
ØD Ød L Tool No.
1/4 3mm 1 RB-100
1/4 1/8 1 RB-102
8mm 6mm 1 RB-104
8mm 1/4 1 RB-106
3/8 1/4 1 RB-108
10mm 8mm 1 RB-110
12mm 6mm 1 RB-112
L
12mm 8mm 1 RB-114 d
1/2 1/4 1 RB-116 D
1/2 8mm 1 RB-118
1/2 10mm 1 RB-120
1/2 3/8 1-3/16 RB-122
Tool illustrations not shown at actual size.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 199
adapter/Holder
ISO Tool Holder with Pull Stud for Morbidelli & SCM Machines
ØD Adapter Standard B Collet Standard Tool No.
50mm(2) ISO30 55mm(2-5/32) ER32 HO-112
ISO Tool Holder
ØD Adapter Standard B Collet Standard Tool No.
50mm(2) ISO30 50mm(2) ER32 HO-116
50mm(2) ISO40 63mm(2-1/2) ER32 HO-124
B
Replacement Parts & Accessories
HSK Tool Holder
ØD Adapter Standard B Collet Standard Tool No.
50mm(2) HSK63F 68mm(2-11/16) ER32 HO-132
63mm(2-1/2) HSK63F 68mm(2-11/16) ER40 HO-136
For CNC Collets see page 202.
Industrial Quality
Visit www.amantool.com for more Adapters/Holders.
Tool illustrations not shown at actual size.
200 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
retaInIng Stud
D
D1
For Machines
L
ØD ØD1 L G Adapter Tool No.
Morbidelli, SCM
8.5mm(11/32) 6.5mm(1/4) 22mm(7/8) M10 ISO30 CO-300
G
D
D1
Busellato, Weeke, Bulleri, Maka
13mm(1/2) 9mm(3/8) 24mm(15/16) M12 ISO30 CO-304 L
Cosmec, Reichenbacher
19mm(3/4) 14mm(9/16) 26mm(1-1/32) M16 ISO40 CO-308
G
D
D1
Alberti, Vitap, Masterwood
13mm(1/2) 9mm(3/8) 24mm(15/16) M12 ISO30 CO-312 L
Replacement Parts & Accessories
Industrial Quality
D
Esseteam D1
12mm(15/32) 8mm(5/16) 24mm(15/16) M12 ISO30 CO-316
L
D
Biesse D1
13mm(1/2) 9mm(3/8) 24mm(15/16) M12 ISO30 CO-328
L
D
Biesse, Masterwood D1
12mm(15/32) 8mm(5/16) 24mm(15/16) M12 ISO30 CO-332
L
Komo D
D1
13mm(1/2) 9mm(3/8) 24mm(15/16) M12 BT30 CO-336
L
Visit www.amantool.com for more Retaining Studs. G
Tool illustrations not shown at actual size.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 201
colletS for er32 nut & er40 nut
D D
ØD ER32 Tool No. ER40 Tool No.
2mm to 3mm CO-100 —
3mm to 4mm CO-104 CO-200
5mm to 6mm CO-112 CO-204
6mm to 7mm CO-116 CO-206
7mm to 8mm CO-120 CO-208
9mm to 10mm CO-130 CO-212
10mm to 11mm CO-134 CO-214
11mm to 12mm CO-138 CO-216
12mm to 13mm CO-142 CO-218
13mm to 14mm CO-146 CO-220
14mm to 15mm CO-150 —
15mm to 16mm — CO-224
16mm to 17mm CO-158 CO-226
17mm to 18mm CO-162 CO-228
18mm to 19mm CO-166 —
19mm to 20mm CO-170 —
Replacement Parts & Accessories
20mm to 21mm — CO-234
24mm to 25mm — CO-242
25mm to 26mm — CO-244
1/4 CO-174 CO-246
3/8 CO-178 CO-248
1/2 CO-182 CO-250
5/8 — CO-252
3/4 CO-190 CO-254
key
ØD Tool No.
For ER32 Nut WR-100
For ER40 Nut WR-104
Industrial Quality
Tool illustrations not shown at actual size.
202 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
StraIgHt carBIde InSert knIVeS
New grades now available for different material types such as softwood/
hardwood, MDF/solid surface and micro-finish for general purpose. All knives
have a 35° bevel, except the micro finish ‘MF’ series which has a 45° bevel.
‘G’ 35º ‘S’ 35º ‘H’ 35º ‘MF’ 45º
Tool Gen. Purpose Wood, Softwood/ MDF, Chipboard, Micro-finish
Application Chipboard, Plywood Hardwood Solid Surface Gen. Purpose
Insert Trim Bits Tool # Tool # Tool # Tool # 12 x 12 x 1.5mm – 4 Cutting Edges
RC-1000, RC-1008, AMA-12 SMA-12 HMA-12 MFA-12
RC-1010, RC-1012,
12mm 4mm
RC-1014, RC-1024,
RC-1026, RC-2257,
RC-2258 12mm 1.5mm
Insert Cutterheads Tool # Tool # Tool # — 14 x 14 x 2mm – 4 Cutting Edges
61288, 61292, RCK-70 SCK-70 HCK-70
61340, 61360,
14mm 6.5mm
61362, 61460,
61462, 61470,
61472, 61480, 61482 14mm 2.0mm
Replacement Parts & Accessories
Industrial Quality
Insert Cutterheads Tool # — — — 14 x 14 x 1.2mm – 4 Cutting Edges
61330, 61350, RCK-71
61450, 61452
14mm 8.6mm
14mm 1.2mm
Various Tool # — — — 14.3 x 14.3 x 2.5mm – 4 Cutting Edges
RCK-73
14.3mm 6.2mm
14.3mm 2.5mm
Various Tool # — — — 15 x 15 x 2.5mm – 4 Cutting Edges
RCK-15
15mm 6.2mm
15mm 2.5mm
Various Tool # — — — 40 x 12 x 1.5mm – 2 Cutting Edges
ICK-40
12mm 4mm
14mm 1.5mm
40mm
Tool illustrations not shown at actual size.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 203
‘G’ 35º ‘S’ 35º ‘H’ 35º ‘MF’ 45º
Tool Gen. Purpose Wood, Softwood/ MDF, Chipboard, Micro-finish
Application Chipboard, Plywood Hardwood Solid Surface Gen. Purpose
18 x 18 x 2mm – 4 Cutting Edges Insert Cutterheads Tool # — — —
61330, 61350, RCK-18
61450, 61452
18mm 10.3mm
18mm 2mm
7.5 x 12 x 1.5mm – 2 Cutting Edges Insert Trim Bits Tool # — Tool # —
RC-1040, RC-1042, AMA-17 HCK-17
RC-1044
12mm 4mm
Insert Cutterheads
61360, 61384
7.5mm 1.5mm
8 x 5.5 x 1.1mm – 2 Cutting Edges Use on RC-2000 Tool # — — —
RCK-8
5.5mm
8mm
Replacement Parts & Accessories
14 x 14 x 1.2mm – 4 Cutting Edges For Holz-Her® System Tool #
RCK-75
14mm 8.6mm
14mm 1.2mm
20 x 5.5 x 1.1mm – 2 Cutting Edges Insert Straight Bit Tool # — — —
RC-3100 RCK-32
5.5mm
20mm 1.1mm
30 x 5.5 x 1.1mm – 2 Cutting Edges Insert Straight Bits Tool # — Tool # —
RC-3110, RC-3200, RCK-34 HCK-34
RC-3204, RC-3260,
5.5mm
RC-3300, RC-3305,
30mm 1.1mm
RC-3310, RC-3312,
RC-3318, RC-3320
50 x 5.5 x 1.1mm – 2 Cutting Edges Insert Straight Bits Tool # — Tool # —
RCK-36 HCK-36
Industrial Quality
RC-3208, RC-3264,
RC-3304, RC-3307,
5.5mm
RC-3314, RC-3316,
50mm RC-3322, RC-3324
1.1mm
Tool illustrations not shown at actual size.
204 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
‘G’ 35º ‘S’ 35º ‘H’ 35º ‘MF’ 45º
Tool Gen. Purpose Wood, Softwood/ MDF, Chipboard, Micro-finish
Application Chipboard, Plywood Hardwood Solid Surface Gen. Purpose
Insert Straight Bits Tool # — Tool # — 30 x 9 x 1.5mm – 4 Cutting Edges
RC-1080, RC-1082, AMA-30 MDF-30
RC-1154, RC-2080, 9mm 4mm
RC-2082, RC-2154
14mm 1.5mm
30mm
Various Tool # — — — 50 x 9 x 1.5mm – 4 Cutting Edges
AMA-50
9mm
26mm
50mm
4mm
1.5mm
Insert Cutterheads Tool # — Tool # — 15 x 12 x 1.5mm – 2 Cutting Edges
61342, 61362, ICK-15 HCK-15
61386 12mm 4mm
Replacement Parts & Accessories
Industrial Quality
15mm 1.5mm
Insert Cutterhead Tool # Tool # Tool # — 20 x 12 x 1.5mm – 2 Cutting Edges
61388 ICK-20 SCK-20 HCK-20
12mm 4mm
20mm 1.5mm
Various Tool # — Tool # — 25 x 12 x 1.5mm – 2 Cutting Edges
AMA-25 HMA-25
12mm 4mm
25mm 1.5mm
Various Tool # — Tool # — 25 x 12 x 1.5mm – 2 Cutting Edges
ICK-25 HCK-25
12mm 4mm
14mm 1.5mm
25mm
Various Tool # — — — 10.5 x 10.5 x 1.5mm – 4 Cutting Edges
AMA-10
10.5mm 4mm
10.5mm 1.5mm
Tool illustrations not shown at actual size.
r! Warning: Before use, read router bit safety guidelines on pages 186-188. www.amanatool.com 205
‘G’ 35º ‘S’ 35º ‘H’ 35º ‘MF’ 45º
Tool Gen. Purpose Wood, Softwood/ MDF, Chipboard, Micro-finish
Application Chipboard, Plywood Hardwood Solid Surface Gen. Purpose
30 x 12 x 1.5mm – 2 Cutting Edges Insert Trim Bits Tool # Tool # Tool # Tool #
RC-1002, RC-1004, ICK-30 SCK-30 HCK-30 MFK-30
General Use
12mm 4mm
14mm 1.5mm
30mm
29.5 x 12 x 1.5mm – 4 Cutting Edges Insert Straight Bits Tool # Tool # Tool # —
RC-1084, RC-1086, RCK-30 SRK-30 HRK-30
RC-1088, RC-1090,
12mm 4mm
RC-1156, RC-1160,
RC-1164, RC-2084,
14mm 1.5mm RC-2086, RC-2088,
30mm
RC-2090, RC-2156,
RC-2160, RC-2164
50 x 12 x 1.5mm – 2 Cutting Edges Insert Cutterheads Tool # Tool # Tool # —
61304, 61306, ICK-50 SCK-50 HCK-50
61310
4mm 12mm
26mm
50mm 1.5mm
Replacement Parts & Accessories
50 x 12 x 1.5mm – 4 Cutting Edges Insert Cutterheads Tool # Tool # Tool # —
RC-1158, RC-1162, RCK-50 SRK-50 HRK-50
RC-1166, RC-2158,
4mm 12mm
RC-2162, RC-2164
26mm
50mm 1.5mm
30 x 12 x 1.5mm – 2 Cutting Edges Edgebander Trim Tool # — — —
Knives, Right Hand ICK-35RH
12mm 4mm
14mm 1.5mm
30mm
30 x 12 x 1.5mm – 2 Cutting Edges Edgebander Trim Tool # — — —
Knives, Left Hand ICK-35LH
12mm 4mm
14mm 1.5mm
30mm
50 x 12 x 1.7mm – 4 Cutting Edges Use on RC-2400 Tool # — — —
RCK-151
Industrial Quality
Use on RC-1006
4mm 12mm
50mm
1.7mm
Tool illustrations not shown at actual size.
206 r! Warning: Before use, read router bit safety guidelines on pages 186-188.
d d
brad point borinG†
57mm Long, 10mm x 30mm Shank
In-Line Tool No. Tool No.
Boring ØD B Ød L LH RH
Machines 3mm 27mm 10mm 57mm 301003 201003 *
L L
3.2mm 27mm 10mm 57mm 301032 201032
4mm 27mm 10mm 57mm 301004 201004
B B 4.5mm 27mm 10mm 57mm — 201045
Multi-Purpose
Boring 5mm 27mm 10mm 57mm 301005 201005
5.1mm 27mm 10mm 57mm 301051 201051
D D 5.2mm 27mm 10mm 57mm 301052 201052
Left Hand Right Hand 5.5mm 27mm 10mm 57mm 301055 201055
6mm 27mm 10mm 57mm 301006 201006
Countersinks/
Counterbores 6.5mm 27mm 10mm 57mm 301065 201065
a 6.7mm 27mm 10mm 57mm 301067 201067
7mm 27mm 10mm 57mm 301070 201070
7.5mm 27mm 10mm 57mm 301075 201075
8mm 27mm 10mm 57mm 301008 201008
8.2mm 27mm 10mm 57mm 301082 201082
9mm 27mm 10mm 57mm 301090 201090
10mm 27mm 10mm 57mm 301010 201010
10.5mm 27mm 10mm 57mm 301105 201105
12mm 27mm 10mm 57mm 301012 201012
14mm 27mm 10mm 57mm — 201014
15mm 27mm 10mm 57mm 301015 201015
16mm 27mm 10mm 57mm 301016 201016
17mm 27mm 10mm 57mm 301017 201017
18mm 27mm 10mm 57mm 301018 201018
19mm 27mm 10mm 57mm 301019 201019
20mm 27mm 10mm 57mm 301020 201020
3/16 27mm 10mm 57mm 301047 —
1/4 27mm 10mm 57mm 301007 201007
3/8 27mm 10mm 57mm 301009 201009
1/2 27mm 10mm 57mm 301013 201013
* With solid carbide cutting edge.
d d
HiGH pErForManCE ditEC™
brad point borinG†
Ditec™ dowel drills feature special grinding and high performance carbide for
Boring/Drilling
ultra long-lasting applications.
L L
Tool No. Tool No.
B B ØD B Ød L LH RH
5mm 27mm 10mm 57mm 305005 205005
8mm 27mm 10mm 57mm 305008 205008
5mm 40mm 10mm 70mm 306005 206005
D D
8mm 40mm 10mm 70mm 306008 206008
Left Hand Right Hand
Industrial Quality
† Application: Not to be used in portable drills or handheld routers.
3D renderings & tool illustrations not shown at actual size.
208 Wood profiles shown at actual size. Visit our website for additional 1:1 profiles.
† d d
Tool No. Tool No.
ØD B Ød L LH RH
3mm 40mm 10mm 70mm *
L L
3.2mm 40mm 10mm 70mm
4mm 40mm 10mm 70mm
4.5mm 40mm 10mm 70mm B B
5mm 40mm 10mm 70mm
5.1mm 40mm 10mm 70mm
5.2mm 40mm 10mm 70mm
5.5mm 40mm 10mm 70mm D D
6mm 40mm 10mm 70mm Left Hand Right Hand
6.5mm 40mm 10mm 70mm
6.7mm 40mm 10mm 70mm
7mm 40mm 10mm 70mm
a
7.5mm 40mm 10mm 70mm
8mm 40mm 10mm 70mm
8.2mm 40mm 10mm 70mm
9mm 40mm 10mm 70mm
10mm 40mm 10mm 70mm
11mm 40mm 10mm 70mm
12mm 40mm 10mm 70mm
13mm 40mm 10mm 70mm
14mm 40mm 10mm 70mm
15mm 40mm 10mm 70mm
16mm 40mm 10mm 70mm
17mm 40mm 10mm 70mm —
3/16 40mm 10mm 70mm
1/4 40mm 10mm 70mm
3/8 40mm 10mm 70mm
7/16 40mm 10mm 70mm
1/2 40mm 10mm 70mm
5/8 40mm 10mm 70mm
d d
4mm 47mm 10mm 77mm
5mm 47mm 10mm 77mm
5.1mm 47mm 10mm 77mm
5.2mm 47mm 10mm 77mm
6mm 47mm 10mm 77mm —
7mm 47mm 10mm 77mm L L
8mm 47mm 10mm 77mm
8.2mm 47mm 10mm 77mm
9mm 47mm 10mm 77mm B B
10mm 47mm 10mm 77mm Boring/Drilling
Industrial Quality
12mm 47mm 10mm 77mm
* With solid carbide cutting edge.
D D
Left Hand Right Hand
† Application: Not to be used in portable drills or handheld routers.
3D renderings & tool illustrations shown at actual size.
Wood profiles shown at actual size. Visit our website for additional 1:1 profiles. www.amanatool.com
d d
tHrouGH-HolE (‘v’ point)†
57mm Long, 10mm x 22mm Shank
In-Line
Boring Tool No. Tool No.
Machines ØD B Ød L LH RH
4mm 35mm 10mm 57mm 413004 313004
L L 5mm 35mm 10mm 57mm 413005 313005
6mm 35mm 10mm 57mm 413006 313006
Multi-Purpose B B 7mm 35mm 10mm 57mm 413070 313070
Boring
8mm 35mm 10mm 57mm 413008 313008
9mm 35mm 10mm 57mm 413090 313090
10mm 35mm 10mm 57mm 413010 313010
D D 12mm 35mm 10mm 57mm 413012 313012
Left Hand Right Hand
Countersinks/ 1/4 35mm 10mm 57mm 413007 313007
Counterbores 3/8 35mm 10mm 57mm 413009 313009
1/2 35mm 10mm 57mm 413013 313013
d d 70mm Long, 10mm x 23mm Shank
4mm 47mm 10mm 70mm 414004 314004
5mm 47mm 10mm 70mm 414005 314005
5.5mm 47mm 10mm 70mm 414055 314055
6mm 47mm 10mm 70mm 414006 314006
7mm 47mm 10mm 70mm 414070 314070
8mm 47mm 10mm 70mm 414008 314008
L L 9mm 47mm 10mm 70mm 414090 314090
10mm 47mm 10mm 70mm 414010 314010
11mm 47mm 10mm 70mm 414011 314011
B B
12mm 47mm 10mm 70mm 414012 314012
14mm 47mm 10mm 70mm 414014 314014
16mm 47mm 10mm 70mm 414016 314016
3/16 47mm 10mm 70mm 414047 314047
1/4 47mm 10mm 70mm 414007 314007
D D
Left Hand Right Hand 9/32 47mm 10mm 70mm 414281 314281
21/64 47mm 10mm 70mm 414833 314833
11/32 47mm 10mm 70mm 414343 —
3/8 47mm 10mm 70mm 414009 314009
7/16 47mm 10mm 70mm 414111 314111
1/2 47mm 10mm 70mm 414013 314013
5/8 47mm 10mm 70mm 414113 314113
d d
77mm Long, 10mm x 27mm Shank
5mm 50mm 10mm 77mm 415005 315005
6mm 50mm 10mm 77mm 415006 315006
7mm 50mm 10mm 77mm 415070 315070
8mm 50mm 10mm 77mm 415008 315008
Boring/Drilling
L L 9mm 50mm 10mm 77mm 415090 315090
10mm 50mm 10mm 77mm 415010 315010
B B
D D
Left Hand Right Hand
Industrial Quality
† Application: Not to be used in portable drills or handheld routers.
3D renderings & tool illustrations not shown at actual size.
210 Wood profiles shown at actual size. Visit our website for additional 1:1 profiles.
ditEC™ Solid CarbidE d d
brad point dowEl drill†
Special solid carbide grade cutting flute for long lasting performance. In-Line
Boring
Tool No. Tool No. Machines
ØD B Ød L LH RH
5mm 22mm 10x25mm 57.5mm 315105 215005 L L
8mm 22mm 10x25mm 57.5mm 315108 215008
5mm 40mm 10x25mm 70mm 317005 217005 Multi-Purpose
Boring
8mm 40mm 10x25mm 70mm 317008 217008 B B
D D
Countersinks/
Left Hand Right Hand Counterbores
ditEC™ Solid CarbidE d d
tHrouGH-HolE dowEl drill†
Special solid carbide grade cutting flute for long lasting performance.
Tool No. Tool No.
ØD B Ød L LH RH
5mm 22mm 10x25mm 57.5mm 315015 215015
8mm 22mm 10x25mm 57.5mm 315018 215018 L L
5mm 40mm 10x25mm 70mm 317015 217015
8mm 40mm 10x25mm 70mm 317018 217018
B B
D D
Left Hand Right Hand
Boring/Drilling
Industrial Quality
† Application: Not to be used in portable drills or handheld routers.
3D renderings & tool illustrations not shown at actual size.
Wood profiles shown at actual size. Visit our website for additional 1:1 profiles. www.amanatool.com 211
d
CountErSinkS
For borinG MaCHinES†
In-Line With Slow Spiral, HSS M2 DIN 338 Fully Ground Drill
Boring
Machines Carbide-Tipped • 2 Flute
L Drills and countersinks in one step. Available in two sizes and each complete
with the drill bit and Allen wrench for easy bit replacement.
Multi-Purpose Repl.
Boring ØD ØD1 a° Ød L Drill Bit Tool No.
a° 1/2 4mm 45° 10mm 60mm 630-202 55640
a°= 45° 1/2 5mm 45° 10mm 60mm 55105 55642
Countersinks/
Counterbores D1
D
D
MEtriC CountErSinkS†
Carbide-Tipped • 2 Flute
Application: Use with 10mm shank boring bits to drill and countersink for
screws in one pass.
Drills sold separately.
Tool No. Tool No.
a° L
ØD Ød L LH RH
16mm 5mm 16.5mm 416005 316005
a°= 45°
16mm 6mm 16.5mm 416006 316006
16mm 7mm 16.5mm 416007 316007
18mm 8mm 16.5mm 416008 316008
18mm 9mm 16.5mm 416009 316009
20mm 10mm 16.5mm 416010 316010
20mm 12mm 16.5mm 416012 316012
d Replacement set screw #67087 (5mm only).
Boring/Drilling
Replacement set screw #67079 (6mm to 12mm).
Note: Right hand tools rotate clockwise. Left hand tools rotate counter-clockwise.
Industrial Quality
† Application: Not to be used in portable drills or handheld routers.
3D renderings & tool illustrations not shown at actual size.
212 Wood profiles shown at actual size. Visit our website for additional 1:1 profiles.
† d
Application: Boring machines (10mm shank) and drill presses (3/8" shank)
Tool No. Tool No.
ØD Ød L LH RH
15mm 10mm 57mm L
18mm 10mm 57mm —
20mm 10mm 57mm
22mm 10mm 57mm
25mm 10mm 57mm
26mm 10mm 57mm
28mm 10mm 57mm
D
30mm 10mm 57mm
32mm 10mm 57mm
35mm 10mm 57mm
40mm 10mm 57mm
3/4 10mm 57mm
13mm 10mm 70mm
14mm 10mm 70mm —
15mm 10mm 70mm
16mm 10mm 70mm —
20mm 10mm 70mm
25mm 10mm 70mm
26mm 10mm 70mm
30mm 10mm 70mm
35mm 10mm 70mm
40mm 10mm 70mm
9/16 10mm 70mm
3/4 10mm 70mm
25mm 10mm 77mm
30mm 10mm 77mm
35mm 10mm 77mm
16mm 10mm 90mm —
18mm 10mm 90mm —
22mm 10mm 90mm —
28mm 10mm 90mm —
35mm 10mm 90mm —
Boring/Drilling
Industrial Quality
35mm 3/8 90mm —
† Application: Not to be used in portable drills or handheld routers.
3D renderings & tool illustrations shown at actual size.
Wood profiles shown at actual size. Visit our website for additional 1:1 profiles. www.amanatool.com
d
†
L1
Application: Drill Presses Only / Metric European hinges.
ØD Ød L1 L Tool No.
11mm 10mm 30mm 90mm
12mm 10mm 30mm 90mm
15mm 10mm 30mm 90mm
L
18mm 10mm 30mm 90mm
19mm 10mm 30mm 90mm
20mm 10mm 30mm 90mm
21mm 10mm 30mm 90mm
22mm 10mm 30mm 90mm
23mm 10mm 30mm 90mm
24mm 10mm 30mm 90mm
26mm 10mm 30mm 90mm
D
28mm 10mm 30mm 90mm
30mm 10mm 30mm 90mm
31mm 10mm 30mm 90mm
32mm 10mm 30mm 90mm
34mm 10mm 30mm 90mm
35mm 10mm 30mm 90mm
36mm 10mm 30mm 90mm
40mm 10mm 30mm 90mm
Boring/Drilling
Industrial Quality
† Application: Not to be used in portable drills or handheld routers.
3D renderings & tool illustrations shown at actual size.
Wood profiles shown at actual size. Visit our website for additional 1:1 profiles.
HinGE borinG For drill prESSES† d
3/8" Shank • 2-Wing
Application: Drill presses only, right hand rotation. Economical alternative to In-Line
other 35mm hinge bits. Boring
Machines
ØD Ød L Tool No. L
35mm 3/8 57mm EB-351
Note: Right hand tools rotate clockwise. Left hand tools rotate counter-clockwise.
Multi-Purpose
Boring
Countersinks/
Counterbores
HinGE borinG For routErS† d
60mm Long, 1/2 Shank, 2-Wing (No Spurs)
Application: Designed for high RPM (22,000) on plunge routers, CNC routers,
L1
machining centers and point-to-point machines.
ØD Ød L1 L Max RPM Tool No. L
35mm 1/2 30mm 60mm 28,000 203431
FraCtional SiZE borinG† d
2 & 3 Wing • With Spurs
Application: 1/2" shank for use in drill presses only.
Boring/Drilling
Industrial Quality
ØD Ød L Wings Tool No.
1-1/8 1/2 4 2 420208
1-1/4 1/2 4 2 420308
1-3/8 1/2 4 2 420408
1-1/2 1/2 4 2 420508 L
2 1/2 4 3 420908
2-1/4 1/2 4 3 420998
D
2-Wing Shown
† Application: Not to be used in portable drills or handheld routers.
3D renderings & tool illustrations not shown at actual size.
Wood profiles shown at actual size. Visit our website for additional 1:1 profiles. www.amanatool.com 215
d
Solid CarbidE
MEtriC brad point borinG drillS†
In-Line Application: Boring machines for shelving hardware, etc. Use with adapters or
Boring bushings, shown below.
Machines
L Tool No. Tool No.
Ød & ØD L LH RH
2mm 49mm 463002 * 363002*
Multi-Purpose 2.5mm 55mm 463025 * 363025*
Boring
3mm 55mm 463003 363003
D 3.2mm 55mm 463032 363032
3.5mm 55mm 463035 363035
4mm 55mm 463004 363004
Countersinks/ 4.5mm 55mm 463045 363045
Counterbores 5mm 55mm 463005 363005
* Due to small diameter, these bits are only available with a “V” point.
d 10MM SHank drill adaptErS†
With Retaining Screw
Application: Use with solid carbide drills, shown above. For quick insertion and
L removal from chuck. (Can be used on left or right hand drills.)
Drills sold separately.
ØD Ød L Tool No.
2mm 10mm 38mm 364020
2.3mm 10mm 38mm 364023
2.5mm 10mm 38mm 364025
3mm 10mm 38mm 364030
3.2mm 10mm 38mm 364032
D 3.5mm 10mm 38mm 364035
4mm 10mm 38mm 364040
4.5mm 10mm 38mm 364045
5mm 10mm 38mm 364050
1/4" 10mm 38mm 364063
Replacement set screw #67092 (new style #10-24) or #67097 (old style 5x8mm).
D
d 10MM SHank drill buSHinGS†
L
Application: Use with solid carbide drills, shown above. Economical alternative
Boring/Drilling
to drill adapters. (Can be used on left or right hand drills.)
ØD Ød L Tool No.
2mm 10mm 23mm 365020
2.5mm 10mm 23mm 365025
3mm 10mm 23mm 365030
3.2mm 10mm 23mm 365032
3.5mm 10mm 23mm 365035
4mm 10mm 23mm 365040
4.5mm 10mm 23mm 365045
Industrial Quality
5mm 10mm 23mm 365050
3D renderings & tool illustrations not shown at actual size.
216 Wood profiles shown at actual size. Visit our website for additional 1:1 profiles.
borinG MaCHinE
rEplaCEMEnt CHuCkS†
For 10mm Shank In-Line Boring Machines In-Line
Application: Replace worn or damaged chucks. In stock for immediate delivery. Boring
Machines
Meets or exceeds O.E.M. specifications.
Due to many different styles, please order carefully.
Multi-Purpose
L Boring
L1
Chuck for Nottmeyer Machines M8 d D
Tool No. Tool No. Countersinks/
ØD L1 M Ød L LH RH Counterbores
19.5mm 15mm 8mm 10mm 40mm 310105 310010 Style 310
L
L1
Chuck for Torwegge • Ayen Machines
Tool No. Tool No.
M10 d D
ØD L1 M Ød L LH RH
19.5mm 15mm 10mm 10mm 40mm 302105 302010
Style 302
L
L1
Chuck for Busselatto • Ompec Machines
Tool No. Tool No.
M10 d D
ØD L1 a° M Ød L LH RH
19.5mm 11mm 30° 10mm 10mm 46mm 303105 303010
a°
Style 303
L
L1
Chuck for Bilek Machines
Tool No. Tool No.
M8 d D
ØD L1 a° M Ød L LH RH
19.3mm 11mm 20.8° 8mm 10mm 48mm 304105 304010
a°
Style 304
L
Chuck for Holz-her • S.C.M.I. • Morbidelli • Biese L1
Reimall • Vitap • Weeke Machines
Tool No. Tool No. M10 d D
ØD L1 M Ød L LH RH
19.5mm 16mm 10mm 10mm 41mm 305105 305010
Boring/Drilling
Industrial Quality
Style 305
L
L1
Chuck for • Morbidelli • Nottmeyer Machines
Tool No. Tool No.
ØD L1 M Ød L LH RH M8 d D
19.3mm 15mm 8mm 10mm 41mm 358105 358010
Style 358
L
Chuck for Scheer Machines
Tool No. Tool No.
ØD L1 M Ød L LH RH M10 d D
19.5mm — 10mm 10mm 42mm 359105 359010
Note: Right hand tools rotate clockwise. Left hand tools rotate counter-clockwise.
Style 359
† Application: Not to be used in portable drills or handheld routers.
3D renderings, tool illustrations and wood profiles not shown at actual size.
Visit our website for 1:1 profiles. www.amanatool.com 217
In-Line
CuttEr SyStEM
Boring For Drill Press
Machines
Carbide Tipped
The only Rosette Cutter featuring replaceable carbide tipped insert knives.
Sixteen different standard knife profiles available along with three sizes of blank
Multi-Purpose knives for custom grinding.
Boring The only Rosette Cutter with an optional shaper cutter head to make matching
moldings.
Precision balanced for high speed operation on a heavy-duty drill press, milling
machine, lathe or shaper. All cutter bodies are manufactured using the highest
Countersinks/
quality tool steel.
Counterbores The Rosette Cutter works well in softwoods, hardwoods, MDF and solid surface
materials such as Corian,® Gibraltar,® Surell,® etc.
CoMplEtE roSEttE CuttEr SyStEM
Important Ordering Instructions:
1-11/16 1) Select the desired product number for either the Rosette cutterhead, shaper head,
1-31/32 * or both.
2) Knives must be ordered separately and you must order two of each of
59010 the selected knife for proper operation.
3) The Rosette cutterhead is designed to be used with a heavy-duty drill press,
milling machine or lathe. Do not attempt to use this product in a light-duty
drill press, portable electric drill or router.
1-15/16
4) Suggested initial speed for a drill press, etc., is 800 RPM with a slow feed rate.
2-5/16 * Increase RPM if tool is cutting too slowly. Conversely, if burning occurs,
decrease RPM.
59020
5) Maximum RPM 5,000 (Rosette Cutter) and 10,000 (shaper cutterhead only).
2-1/2 * These knife patterns will cut either a standard recessed rosette or a rosette
“button.” (See photo and illustrations.)
*
Note: All knives are sold individually. Two of each knife are required for
59160 proper operation.
2-5/16 Set No. 59000
Includes:
59030
3-1/8" diameter Rosette Cutter (1/2" shank).
3-3/4" diameter shaper cutterhead (1" bore)
hex key & custom wood box.
2-15/16 Set No. 5900 can be used on CNC Machines.
3-7/64 * r! Max RPM is 6,000 for MDF and 3,500 for r
! Knives not included.
Solid Wood.
59100 Order knives separately, knives not included.
Set No. 59004
Boring/Drilling
2-15/16
3-7/64 * Includes:
3-1/8" diameter Rosette Cutter (1/2" shank)
hex key & custom wood box.
59120 Order knives separately, knives not included.
r
! Knives not included.
3-15/16
No. 59002
59140 Includes:
3-3/4" diameter shaper cutter only (1" bore).
3-1/8
Order knives separately, knives not included.
Industrial Quality
r
! Knives not included.
59090
Blank carbide tipped knives: Accessories/Parts:
3-1/8 1-1/2" width 59510 Special 1" x 3/4" shaper cutter bushing 59700
1-15/16" width 59520 Replacement 3mm hex key 5008
59110 Replacement special screw (6 required) 67008
Replacement 1/2" shank arbor only 59702
Replacement Bushing BU-564
Wood profiles not shown at actual size. 3D renderings & tool illustrations not shown at actual size.
218 For additional 1:1 profiles and replacement part listing visit www.amanatool.com
For Drill Press
ØD ØD1 B Ød L Max RPM Tool No.
1-25/32 1-23/32 19/64 3/8 2-7/8 1,800
2-1/2 2-27/64 25/64 3/8 2-7/8 1,800
3-11/32 3-1/8 21/64 3/8 2-7/8 1,800
d d d
Top of shank
L
L L
B B B
D1 D1 D1
D D D
DP-300 DP-302 DP-304
49532 DP-300 49532
49532 DP-302 49532
49532 DP-304 49532
1:1
d
Create the edge detail to the rosette to achieve the finished look.
L
ØD a° R B Ød L Tool No. Boring/Drilling
Industrial Quality
15/16 20° 9/64 1/4 1/4 1-5/8 a˚ B
Replacement bearing #47706. R
1:1
Optional Edge
Made With Tool #49532
3D renderings & tool illustrations shown at actual size.
Wood profiles shown at actual size. Visit our website for additional 1:1 profiles. www.amanatool.com
Used to countersink and counterbore holes for the heads of screws in woods, plastic and non-ferrous materials. The 2-flute integral design
ensures uniform and concentric results each and every time. Carbide tips provide chip free hole edges and last at least 40 times longer than
steel countersinks. Available in a wide variety of sizes, complete with the HSS drill bit.
d
With Slow Spiral, HSS M2 DIN 338 Fully Ground Drill
10mm
L1 Wood
L Screw Repl.
Size ØD ØD1 B Ød L1 L Drill Bit Tool No.
B
a° #4 11/32 3/32 1/2 5/16 1-5/8 2-1/4 630-002
a°= 49° #4 3/8 7/64 1/2 5/16 1-5/8 2-3/8 630-098
#6 5/16 1/8 1/2 5/16 1-5/8 2-9/16 630-102
#6 3/8 1/8 1/2 5/16 1-5/8 2-9/16 630-102
D1
#6 1/2 1/8 1/2 5/16 1-5/8 2-9/16 630-102
D
#6 25/64 9/64 1/2 5/16 1-5/8 2-3/4 630-802
#8 25/64 5/32 1/2 5/16 1-5/8 2-7/8 630-202
#8 7/16 11/64 1/2 5/16 1-5/8 3 630-302
#10 7/16 3/16 1/2 3/8 1-3/4 3 630-402
#10 1/2 3/16 1/2 3/8 1-3/4 3 630-402
#12 15/32 7/32 1/2 3/8 1-3/4 3 630-502
Replacement set screw #67083.
Boring/Drilling
d
With Taper Point, HSS M2 DIN 338 Fully Ground Drill
10mm
L1 Wood
L
Screw Repl.
Size ØD ØD1 B Ød L1 L Drill Bit Tool No.
B #4 11/32 3/32 1/2 5/16 1-5/8 2-1/4 630-262
a°
Industrial Quality
a°= 49° #6 3/8 1/8 1/2 5/16 1-5/8 2-9/16 630-266
#6 25/64 9/64 1/2 5/16 1-5/8 2-3/4 630-268
#8 7/16 11/64 1/2 5/16 1-5/8 3 630-272
D1
#10 7/16 3/16 1/2 3/8 1-3/4 3 630-274
D
Replacement set screw #67083.
3D renderings & tool illustrations shown at actual size.
Wood profiles shown at actual size. Visit our website for additional 1:1 profiles.
d
With Slow Spiral, HSS M2 DIN 338 Fully Ground Drill
Drill pilot hole and tapered countersink for wood screws. Carbide tipped for long
lasting results in hardwood, plywood, plastics, etc. L
10mm
Wood Repl.
ØD ØD1 Screw Size a° Ød L Drill Bit Tool No.
3/8 5/64 #4 49° 1/4 2-1/8 630-001 a°
3/8 3/32 #6 49° 1/4 2-1/8 630-002 a°= 49°
3/8 7/64 #8 49° 1/4 2-1/8 630-098
3/8 1/8 #10 49° 1/4 2-1/8 630-102 D1
1/2 9/64 #12 49° 1/4 2-1/8 630-802 D
3/8 5/32 #12 to #14 49° 1/4 2-1/8 630-202
Replacement set screw #67083. Hex key #5009.
d
With Taper Point, HSS M2 DIN 338 Fully Ground Drill
Drill pilot hole and tapered countersink for wood screws. Carbide tipped for long
lasting results in hard wood, plywood, plastics, etc. L 10mm
Wood Repl.
ØD ØD1 Screw Size a° Ød L Drill Bit Tool No.
3/8 5/64 #4 49° 1/4 2-1/8 630-260 a°
3/8 3/32 #6 49° 1/4 2-1/8 630-262 a°= 49°
3/8 7/64 #8 49° 1/4 2-1/8 630-264
3/8 1/8 #10 49° 1/4 2-1/8 630-266 D1
1/2 9/64 #12 49° 1/4 2-1/8 630-268 D
Replacement set screw #67083. Hex key #5009.
With Slow Spiral, HSS M2 DIN 338 Fully Ground Drill
L
Flat bottom counterbores for using round head screws, hex bolts, etc. Includes
pilot drill.
Repl. D
ØD ØD1 Ød L Drill Bit Tool No.
3/8 3/16 1/4 2-3/16 630-402
1/2 1/4 1/4 2-3/4 630-702
5/8 1/4 1/4 2-3/4 630-702
Boring/Drilling
Industrial Quality
Replacement set screw #67083. Hex key #5009.
D1
d
Simply pull sleeve to change drill bits, screwdrivers, countersinks and other
power bits. Special long shaft for use with keyless chucks. This is an industrial
quality accessory manufactured with exacting tolerances.
Ød L Tool No. L
3/8 2
3D renderings & tool illustrations shown at actual size.
Wood profiles shown at actual size. Visit our website for additional 1:1 profiles. www.amanatool.com
Countersink
With ADJustABLe Depth stop
In-Line Carbide-Tipped • 2-Wing
Boring With Slow Spiral, HSS M2 Fully Ground Drill
Machines
A new addition to the well known range of Amana Tool® countersinks. Unique
adjustable depth-stop developed for quick and easy adjustment of the
countersink depth.
Multi-Purpose The user fiendly design enables control of the drill length and its replacement,
Boring without the need to disassemble the depth-stop.
Drill Repl.
ØD ØD1 a° Ød L DIN Drill Bit Tool No.
3/8 5/64 49° 1/4 2-3/8 338 630-220 55234
Countersinks/
Counterbores 3/8 3/32 49° 1/4 2-3/8 338 630-222 55235
3/8 7/64 49° 1/4 2-3/8 1897 630-224 55236
3/8 1/8 49° 1/4 2-3/8 1897 630-226 55237
1/2 9/64 49° 1/4 2-3/8 1897 630-228 55238
d 3/8 5/32 49° 1/4 2-3/8 1897 630-230 55239
Replacement NF1/4 x 1/4 set screw #67070 for tightening depth stop.
Replacement NF1/4-28 x 3/16 set screw #67083 for drill tightening.
Replacement 1/8 x 5/32 double-sided hex key #5019 (included).
a°
a°= 49°
D1
D
Countersink & pLuG set
10mm Carbide Tipped • 10mm Diameter Countersink & Plug
• Drilling & Countersinking with a single tool.
• Concealing of screwheads with plugs which perfectly fit with countersink.
• Designed for portable drills and drill presses.
Description Drill Dia. Tool No.
2 Pc. Countersink & Plug Cutter 1/8 PS-100
2 Pc. Countersink & Plug Cutter 9/64 PS-200
Boring/Drilling
2 Pc. Countersink & Plug Cutter 5/32 PS-300
2 Pc. Countersink & Plug Cutter 11/64 PS-400
All 4 Countersinks & drills & 1 Plug Cutter — PS-500
Plug Cutter only (10mm dia.) — PLC-100
Note: All countersinks are carbide-tipped. The plug cutter and drill bits are high-
speed steel. Countersinks have 8mm shank diameter.
Industrial Quality
PS-500
3D renderings & tool illustrations not shown at actual size.
222 Wood profiles shown at actual size. Visit our website for additional 1:1 profiles.
Improved Spiral Action for Better Chip Ejection d
CountErborES †
Fit Evans, Ritter, Unique, Marcon, Norfield ®
In-Line
and Castle ® Face Frame Machines Boring
Carbide Tipped Machines
Application: Features include precision ground carbide-tipped counterbore for
splinter-free cutting, non-slip surface treatment for positive clamping, wide web
design for superior strength and replaceable HSS fishtail drills. Multi-Purpose
L
Boring
Description ØD ØD1 Ød L Tool No.
Counterbore 3/8 .136 3/8 4-1/16 424000
Replacement #8-32 NC set screw, #67010.
#29 Replacement HSS Fish Tail Drills Countersinks/
Counterbores
Description ØD1 Ød L Tool No.
Standard .136 — 2-7/8 424004
DHN Surface Treated for Longer Tool Life .136 — 2-7/8 424006
D1
D
424000
424004
424006
pluG CuttEr For drill prESS d
Carbide Tipped • 1/2" Shank • 2 Flute
Boring/Drilling
Industrial Quality
Must clamp work piece firmly to drill press table.
ØD ØD1 B Ød L Tool No.
5/8 3/8 1/2 1/2 2-1/2 55220
25/32 1/2 1/2 1/2 2-1/2 55222
29/32 5/8 1/2 1/2 2-1/2 55224 L
B
D1
D D1
3D renderings & tool illustrations not shown at actual size.
Wood profiles shown at actual size. Visit our website for additional 1:1 profiles. www.amanatool.com 223
d
With HSS Slow Spiral Drill
Commonly used for RTA (ready-to-assemble) furniture fittings. Specially-treated
high-speed steel countersink with polished slow-spiral drill bit. Will perform 3
tasks in one: pilot hole, clearance hole and countersink. For connecting screws
L1 (Confirmat, Directa, etc.). The shankless countersink is heat treated.
D
ØD ØD1 ØD2 B Ød L1 L Tool No.
L
10mm 5mm 7mm <30mm* 7mm 30mm 106mm
* B can be adjusted up to 30mm.
B
D2
D1
d
With HSS Slow Spiral Drill
L Commonly used for RTA (ready-to-assemble) furniture fittings. Specially-treated
high-speed steel countersink with polished slow-spiral drill bit. Will perform 3
B1
L1 tasks in one: pilot hole, clearance hole and countersink. For connecting screws
D2
(Confirmat, Directa, etc.). The shankless countersink is heat treated.
B
D1 ØD ØD1 ØD2 B B1 Ød L1 L Tool No.
3.5mm 5mm 7mm 15mm 5mm 10mm 33mm 52mm
5mm 7mm 10mm 19mm 5mm 10mm 32mm 58mm
Replacement 3.5mm HSS slow spiral drill bit, 2-3/4" long, #55104.
Replacement 5.0mm HSS slow spiral drill bit, 3-7/16" long, #55105.
D Replacement #10-24 set screw, #67092 (requires #5000 3/32" hex key).
Boring/Drilling
L RTA furniture step drill – bit creates steps for the “Confirmat” style furniture
screw. Used for drilling pilot hole, clearance hole and countersinking.
B1
L1
D2 ØD ØD1 ØD2 Ød B B1 L1 L Tool No.
Industrial Quality
B 3.5mm 5mm 7mm 1/4 15mm 5mm 33mm 60mm
5mm 7mm 10mm 1/4 19mm 5mm 38mm 62mm
D1
Replacement 3.5mm HSS slow spiral drill bit, 2-3/4" long, #55104.
Replacement 5.0mm HSS slow spiral drill bit, 3-7/16" long, #55105.
D Replacement #10-24 set screw, #67092 (requires #5000 3/32 hex key).
3D renderings & tool illustrations shown at actual size.
Wood profiles shown at actual size. Visit our website for additional 1:1 profiles.
‘di-Count’™ adJuStablE CountErSink d
Carbide-Tipped • 2-Wing
Accepts Drills* from 3/32" through 9/32" (Wood Screw Sizes #2 through #18). In-Line
* Drills not included. Boring
Machines
ØD a° B Ød L Tool No.
7/16 to 19/32 45° 7/16 3/32 to 9/32 1-1/4 20200
Replacement allen screws (2 required) #67090. Multi-Purpose
Replacement 3mm hex key #5004 (included). Boring
L
B
a°
a°= 45°
Countersinks/
Counterbores
D
adJuStablE univErSal
drill-dEptH StopS
Can be clamped onto any drill* from 3mm to 10mm. An innovation and universal
solution to the problem of drilling holes to an accurate depth. Special design to
minimize any marks on the surface being drilled. User friendly – quick assembly
and easy drill-depth adjustment.
* Drills not included.
Range of Drill Diameters Tool No.
3mm to 7mm (1/8 to 1/4) 20210 Boring/Drilling
Industrial Quality
6mm to 10mm (1/4 to 3/8) 20212
Replacement 3mm hex key #5004 (not included).
† Application: Not to be used in portable drills or handheld routers.
3D renderings & tool illustrations not shown at actual size.
Wood profiles shown at actual size. Visit our website for additional 1:1 profiles. www.amanatool.com 225
ForStnEr pattErn SEtS
All sets are packed in beautiful, custom-made hardwood cases. Features a
sliding, clear acrylic door with sizes imprinted on the front and a pre-drilled
In-Line bit tray that rotates for easy access to your tools.
Boring
Machines
Set No. FO-600 3/8" Shank High Carbon Tool Steel
Description Order #
6-Piece Forstner bit set, 3/8" shank. Sizes: 3/8, 1/2, 5/8, 3/4, 7/8, 1. FO-600
Multi-Purpose 15-Piece Forstner bit set, 3/8" shank. FO-700
Boring
Sizes: All 15 fractional sizes. (3/8 through 2-1/8 in 1/8 increments.)
Set No. FO-700
Countersinks/
d Multi-tootH ForStnEr bitS
Counterbores Specially designed Forstner bits for cutting telephone and computer wire
grommet access holes in office furniture. All tools feature precision ground
and tempered tool steel, multi-tooth cutting edges for faster cutting and chip
removal, and massive cutter body to dissipate heat and resist burning.
1/2" Shank High Carbon Tool Steel
ØD Ød L Tool No.
L 2-1/8(54mm) 1/2 6 FO-546
2-1/4(57mm) 1/2 6 FO-558
2-3/8(60mm) 1/2 6 FO-562
3(76mm) 1/2 6 FO-574
3-1/8(80mm) 1/2 6 FO-560
ForStnEr pattErn bitS
D Application: Drill pocket-holes, flat-bottom holes*, etc., using any 3/8" or larger
portable drill or stationary drill press. Forstner pattern bits are well known for their
ability to drill clean and chip-free holes in wood. Amana Tool® uses only the finest
quality tool steel, precision machined and ground on state-of-the-art equipment.
Large gullets milled in the tool body provide exceptional chip clearance.
2 Wing High Carbon Tool Steel
d ØD Ød L Tool No.
1/4 5/16 3-1/2 FO-080
3/8 3/8 3-1/2 FO-095
5/16 3/8 3 FO-079
7/16 3/8 3-1/2 FO-111
1/2 3/8 3-1/2 FO-127
9/16 3/8 3-1/2 FO-142
5/8 3/8 3-1/2 FO-160
L 11/16 3/8 3-1/2 FO-174
3/4 3/8 3-1/2 FO-190
13/16 3/8 3-1/2 FO-206
Boring/Drilling
7/8 3/8 3-1/2 FO-222
15/16 3/8 3-1/2 FO-238
1 3/8 3-1/2 FO-254
1-1/16 3/8 3-1/2 FO-269
1-1/8 3/8 3-1/2 FO-285
D 1-1/4 3/8 3-1/2 FO-317
1-3/8 3/8 3-1/2 FO-349
35mm 3/8 3-1/2 FO-350
1-1/2 3/8 3-1/2 FO-381
Industrial Quality
1-5/8 3/8 3-1/2 FO-413
1-3/4 3/8 3-1/2 FO-445
1-7/8 3/8 3-1/2 FO-476
2 3/8 3-1/2 FO-508
2-1/8 3/8 3-1/2 FO-540
* Note: A small pilot hole used for centering will be present on flat bottom holes.
3D renderings & tool illustrations not shown at actual size.
226 Wood profiles shown at actual size. Visit our website for additional 1:1 profiles.
™
B
20° 20°
18°
18° ØD C
The Amana Tool® Presitge™ general-purpose blade cuts
smoother and stays sharper, longer – in both solid wood and
man-made materials. It features a massive tool-steel plate
(.102" thick!) with expansion slots and copper plugs that
practically eliminate vibration. The 40 teeth are ground with a
steep 20° bevel angle, alternating left and right, for crisp, clean Soft/Hardwood Combination Soft/Hardwood Cabinet Plywood
cuts both across grain and with the grain. The 18° hook angle Ripping Rip/Crosscut Crosscut Rip/Crosscut
yields an effortless feed. The precision-ground D-10 carbide
teeth are individually computer-verified to have minimal runout.
• Massive (.102" thick!) tool-steel plate with copper plugs Ripping solid wood
that practically eliminates vibration. Crosscutting solid wood
• Precision-ground D-10 carbide teeth (20˚ ATB, hook) are Ripping plywood
individually computer verified for runout of less than
Crosscutting plywood
1/10,000" on all axis.
Industrial Quality • Carbide Tipped
Saw Blades
“Over the years, I’ve tried virtually every major brand of saw
blade. The Amana Prestige has all the performance features that
I want in a blade, including crisp, smooth cuts both with and
across the grain, low feed resistance and incredible edge
retention. Without a doubt, the Amana Prestige is the finest
combination saw blade I’ve ever used.”
ØD ‘B’ Kerf ‘C’ Plate
Inch mm Teeth Grind Inch Inch Bore Tool No.
10 250 40 ATB .134 .102 5/8
12 300 40 ATB .134 .102 1
! Before use, read saw blade safety guidelines on pages 266-268.
With Cooling Slots And Anti-Kickback Feature
1.0 B
15°
ØD C
20°
Designed for ripping hardwood and softwood, this exceptional blade cuts fast
and smooth. The flat-top grind and the high positive hook angle reduce feed
effort. The anti-kickback limits the thickness of chip; taken to offer a safer cut.
Cooling slots in the body prevent excessive heat build-up.
Soft/Hardwood Ripping
ØD ‘B’ Kerf ‘C’ Plate
Inch mm Teeth Grind Inch Inch Bore *P.H. Tool No.
10 250 20 FT .126 .087 5/8 —
10 250 20 FT .126 .087 30mm 2/7/42 & 2/10/60
12 300 24 FT .126 .087 1 —
12 300 24 FT .126 .087 30mm 2/7/42 & 2/10/60
14 350 28 FT .126 .087 1 —
14 350 28 FT .126 .087 30mm 2/7/42 & 2/10/60
16 400 28 FT .137 .098 1 —
All 30mm bore include the pin-hole arrangements.
B
15°
ØD C
20°
This blade is the classic ripper for both hardwood and softwood. It features
the flat-top grind for cutting with the grain efficiently; ample gullets for fast
chip-clearance; expansion slots and turbulence-reducing copper plugs. Available
in 18° and 20° hook configurations. The new blade with the 20° hook angle
features a thicker plate and cuts a wider kerf. Use in single and gang-rip saws.
Soft/Hardwood Ripping
ØD ‘B’ Kerf ‘C’ Plate
Inch mm Teeth Grind Inch Inch Bore *P.H. Tool No.
10 250 24 FT .142 .095 5/8 —
12 300 30 FT .160 .110 1 —
12 300 30 FT .173 .110 30mm 2/7/42 & 2/10/60
Saw Blades
Industrial Quality • Carbide Tipped
16 400 36 FT .173 .118 30mm 2/7/42 & 2/10/60
18 450 32 FT .157 .110 1 —
20 500 36 FT .173 .110 1 —
ØD ‘B’ Kerf ‘C’ Plate
Inch mm Teeth Grind Inch Inch Bore *P.H. Tool No.
10 250 20 FT .126 .087 5/8 —
12 300 24 FT .126 .087 1 —
12 300 24 FT .126 .087 30mm 2/7/42 & 2/10/60
14 350 28 FT .137 .098 1 —
16 400 32 FT .137 .098 1 —
16 400 32 FT .137 .098 30mm 2/7/42 & 2/10/60
* P.H. denotes pin-hole configuration, if applicable. Example: // = @ mm dia. on mm circle.
! Before use, read saw blade safety guidelines on pages 266-268. www.amanatool.com
B
15°
ØD C
18°
Heavy-duty production ripping is this blade’s forte. It has all the features
needed for use with power feeders and gang-ripping operations: a low
tooth count, flat-top grind, deep gullets for efficient chip clearance and a
thick plate for reduced vibration.
Soft/Hardwood Ripping
ØD ‘B’ Kerf ‘C’ Plate
Inch mm Teeth Grind Inch Inch Bore *P.H. Tool No.
10 250 20 FT .150 .095 5/8 —
12 300 24 FT .173 .110 1 —
14 350 28 FT .173 .110 1 —
14 350 28 FT .173 .110 30mm 2/7/42 & 2/10/60
16 400 32 FT .173 .118 1 —
16 400 32 FT .173 .118 30mm 2/7/42 & 2/10/60
0.3 B
15° 45° 45°
ØD C
22°
Rip then glue up. With this exceptional blade, there’s no need for sanding or
jointing after the cut. The precision triple-chip grind & extra-high hook angle
allow aggressive feed rates, yet produces an extra-smooth cut finish. The thick
plate minimizes vibration. Use on table saws, sliding table saw, single and
gang-rip operations.
Soft/Hardwood Ripping
ØD ‘B’ Kerf ‘C’ Plate
Inch mm Teeth Grind Inch Inch Bore Machine Tool No.
10 250 30 TCG .145 .095 5/8 —
12 300 40 TCG .160 .110 1 —
12 300 40 TCG .160 .110 70mm SCM
14 350 40 TCG .169 .118 1 —
14 350 40 TCG .169 .118 3-1/8 Mereen-Johnson
14 350 40 TCG .169 .118 70mm SCM
Industrial Quality • Carbide Tipped
Saw Blades
2 Keyways (20mm Centers x 5mm Dia.)
* P.H. denotes pin-hole configuration, if applicable. Example: // = @ mm dia. on mm circle.
! Before use, read saw blade safety guidelines on pages 266-268.
B
10° 10°
15°
ØD C
20°
This is an excellent and popular general purpose configuration blade.
Its low tooth count, high hook angle, and ample gullets make it an
aggressive, fast-cutting ripping blade. But its ATB grind allows it to
crosscut well. A good choice for all-around use.
Soft/Hardwood Ripping Soft/Hardwood Crosscut
ØD ‘B’ Kerf ‘C’ Plate
Inch mm Teeth Grind Inch Inch Bore *P.H. Tool No.
10 250 30 ATB .126 .087 5/8 —
10 250 30 ATB .126 .087 30mm 2/7/42 & 2/10/60
12 300 36 ATB .126 .087 1 —
12 300 36 ATB .126 .087 30mm 2/7/42 & 2/10/60
14 350 42 ATB .137 .098 1 —
14 350 42 ATB .137 .098 30mm 2/7/42 & 2/10/60
16 400 48 ATB .137 .098 1 —
16 400 48 ATB .137 .098 30mm 2/7/42 & 2/10/60
18 450 54 ATB .150 .110 1 —
20 500 60 ATB .173 .110 1 —
B
10° 10°
15°
ØD C
15°
While similar in most aspects to the blade above, this one has a slightly lower
hook angle. That lower angle improves the surface quality of the cut but
increases the feed pressure required. This blade is a good choice for general
purpose ripping and crosscutting of hardwoods and softwoods in a range of
thicknesses, with occasional cutting of plywood and other man-made materials
mixed in. Soft/Hardwood Ripping Soft/Hardwood Crosscut
ØD ‘B’ Kerf ‘C’ Plate
Inch mm Teeth Grind Inch Inch Bore *P.H. Tool No.
8 200 34 ATB .118 .079 5/8 —
Saw Blades
Industrial Quality • Carbide Tipped
— 220 34 ATB .118 .079 30mm 2/7/42 †
9 230 24 ATB .118 .079 5/8 —
9 230 40 ATB .118 .079 5/8 —
12 300 48 ATB .126 .087 1 —
12 300 48 ATB .126 .087 30mm 2/7/42 & 2/10/60
14 350 54 ATB .137 .098 1 —
14 350 54 ATB .137 .098 30mm 2/7/42 & 2/10/60
16 400 60 ATB .137 .098 1 —
16 400 60 ATB .137 .098 30mm 2/7/42 & 2/10/60
† For Holz-Her® 220mm panel saws.
See the Amana Tool® PRESTIGE™ general purpose blade on page 228.
* P.H. denotes pin-hole configuration, if applicable. Example: // = @ mm dia. on mm circle.
! Before use, read saw blade safety guidelines on pages 266-268. www.amanatool.com
B
10° 10°
15°
ØD C
15°
A thin-kerf blade has a slightly thinner plate and cutting tips. The benefits
include reduced stress on the saw and its motor and reduced stock loss.
Thin-kerf blades typically are used on saws powered by universal motors,
including jobsite table saws and the various types of miter saws. The
Amana Tool® thin-kerf general purpose blade is not recommended for
cutting stock thicker than 3/4" unless stabilizer(s) are used.
Soft/Hardwood Crosscut Combination Rip/Crosscut
ØD ‘B’ Kerf ‘C’ Plate
Inch mm Teeth Grind Inch Inch Bore Tool No.
8 200 34 ATB .090 .062 5/8
10 250 40 ATB .090 .062 5/8
12 300 48 ATB .090 .062 1
14 350 54 ATB .090 .062 1
15 375 48 ATB .104 .079 1
B
0.25
15° 12° 12°
ØD C
15°
Where one blade must do almost everything – ripping and crosscutting
hardwood and softwood, cutting plywood – this blade is a good choice. It is
in the traditional combination-blade configuration, with a flat-top tooth and
4 alternate top bevel teeth in groupings of five. The large gullets at the raker
tooth allow deep cuts with improved chip ejection.
Combination Rip/Crosscut
ØD ‘B’ Kerf ‘C’ Plate
Inch mm Teeth Grind Inch Inch Bore Tool No.
Industrial Quality • Carbide Tipped
Saw Blades
8 200 40 4&1 .126 .087 5/8
9 230 40 4&1 .126 .087 5/8
10 250 50 4&1 .135 .095 5/8
12 300 60 4&1 .150 .110 1
14 350 70 4&1 .150 .110 1
16 400 80 4&1 .158 .118 1
! Before use, read saw blade safety guidelines on pages 266-268.
B
10° 10°
15°
ØD C
10°
As our standard cut-off and crosscut blade, this is ideal for table saws and
sliding table saws. Its combination of 10° hook and the alternate top bevel
tooth grind provide good-quality cuts and a long cutting life. Suitable for
hardwood, softwood, even plywood and chipboard. Good choice for heavy
production in any cabinet-making shop.
Soft/Hardwood Crosscut
ØD ‘B’ Kerf ‘C’ Plate
Inch mm Teeth Grind Inch Inch Bore *P.H. Tool No.
8 200 48 ATB .118 .079 5/8 —
9 230 60 ATB .118 .079 5/8 —
10 250 60 ATB .126 .087 5/8 —
10 250 60 ATB .126 .087 30mm 2/7/42 & 2/10/60
12 300 60 ATB .126 .087 1 —
12 300 60 ATB .126 .087 30mm 2/7/42 & 2/10/60
12 300 72 ATB .126 .087 1 —
12 300 72 ATB .126 .087 30mm 2/7/42 & 2/10/60 †
14 350 72 ATB .137 .098 1 —
14 350 72 ATB .137 .098 30mm 2/7/42 & 2/10/60
14 350 84 ATB .137 .098 1 —
16 400 96 ATB .137 .098 1 —
18 450 108 ATB .158 .110 1 —
18 450 108 ATB .158 .110 30mm 2/7/42 & 2/10/60
20 500 120 ATB .173 .110 1 —
† For Altendorf,® Omega, SCMI,® and Striebig® sliding table saws.
B
10° 10°
15°
ØD C
a°
This is a heavy-duty production blade for general trimming and crosscutting of
hardwood and softwood. It has an extra-thick plate and cuts a wide kerf. The
Saw Blades
Industrial Quality • Carbide Tipped
hook angle is aggressive, varying from 10° to 18°, depending upon the tooth
count and blade diameter. All blades feature the alternate top bevel grind for
clean cuts. Appropriate for use on table saws and radial arm saws.
Soft/Hardwood Crosscut
ØD ‘B’ Kerf ‘C’ Plate
Inch mm Teeth Grind aº Inch Inch Bore Tool No.
12 300 48 ATB 10º .173 .098 1
12 300 96 ATB 10º .173 .110 1
14 350 54 ATB 15º .173 .110 1
16 400 60 ATB 18º .173 .110 1
16 400 80 ATB 10º .173 .110 1
16 400 96 ATB 10º .173 .110 1
* P.H. denotes pin-hole configuration, if applicable. Example: // = @ mm dia. on mm circle.
! Before use, read saw blade safety guidelines on pages 266-268. www.amanatool.com
B
0.4
15° 45° 45°
ØD C
*a°
Heavy-duty production blade featuring increased thickness of plate and
kerf and more aggressive hook angle. Good for cutting plastic laminated
materials, composition board and plywood.
Plastic Laminate MDF/Fiberboard
Single & Double Sided
ØD ‘B’ Kerf ‘C’ Plate
Inch mm Teeth Grind aº Inch Inch Bore Tool No.
12 300 60 TCG 15º .173 .095 1
12 300 96 TCG 10º .173 .098 1
14 350 54 TCG 15º .173 .110 1
14 350 72 TCG 15º .173 .110 1
14 350 84 TCG 10º .173 .110 1
16 400 60 TCG 10º .173 .118 1
16 400 80 TCG 10º .173 .118 1
16 400 96 TCG 18º .173 .118 1
B
0.3
15° 45° 45°
ØD C
10°
This blade is ideal for cutting materials with fragile surface layers, like
veneers and laminates. High tooth counts yield smooth finishes. The 10°
hook angle provides effortless feeding. The triple-chip tooth opens a
narrow kerf, and the raker widens it.
Plastic Laminate MDF/Fiberboard
Single & Double Sided
ØD ‘B’ Kerf ‘C’ Plate
Inch mm Teeth Grind Inch Inch Bore *P.H. Tool No.
Industrial Quality • Carbide Tipped
Saw Blades
8 200 64 TCG .118 .079 5/8 —
8 200 64 TCG .118 .079 30mm —
– 220 64 TCG .118 .079 30mm 2/7/42 †
10 250 80 TCG .126 .087 5/8 —
10 250 80 TCG .126 .087 30mm 2/7/42 & 2/10/60
12 300 96 TCG .126 .087 1 —
12 300 96 TCG .126 .087 30mm 2/7/42 & 2/10/60
14 350 108 TCG .137 .098 1 —
14 350 108 TCG .137 .098 30mm 2/7/42 & 2/10/60
16 400 120 TCG .137 .098 1 —
18 450 132 TCG .157 .110 1 —
† For Holz-Her® 220mm Panel Saws.
* P.H. denotes pin-hole configuration, if applicable. Example: // = @ mm dia. on mm circle.
! Before use, read saw blade safety guidelines on pages 266-268.
™
0.3 B
15° 45° 45°
HARDER
GRADE
ØD C CARBIDE
0° Hook
If you cut MDF on a regular basis, this is the blade you should use. It has
the same features as our Fine Crosscut blades (see page 234) – such as a
thicker than standard plate, high tooth count, and the TCG grind, but this blade
has the long-lasting DITEC™ carbide tips. In addition, this blade cuts hard and
abrasive composite materials such as: , etc.
MDF/Fiberboard
ØD ‘B’ Kerf ‘C’ Plate
Inch mm Teeth Grind Inch Inch Bore Tool No.
12 300 96 TCG .126 .094 1
14 350 84 TCG .130 .098 1
B
0.3
15° 45° 45°
ØD C
10°
While this blade handles general trimming and crosscutting of hardwood and
softwood, plywood and composition materials, it excels at cutting single or
double-sided plastic-laminated material. It leaves a smooth, clean, chip-free
finish on the top and bottom edges. The blades in this series feature a high tooth
count, the triple-chip grind and a 10° hook angle for a successful compromise
between feed effort and cut finish.
Plastic Laminate MDF/Fiberboard
Single & Double Sided
ØD ‘B’ Kerf ‘C’ Plate
Inch mm Teeth Grind Inch Inch Bore *P.H. Tool No.
8 200 48 TCG .118 .079 5/8 —
9 230 40 TCG .118 .079 5/8 — •
10 250 40 TCG .126 .087 5/8 —
10 250 60 TCG .126 .087 5/8 —
10 250 60 TCG .126 .087 30mm 2/7/42 & 2/10/60
12 300 60 TCG .126 .087 1 —
12 300 60 TCG .126 .087 30mm 2/7/42 & 2/10/60
12 300 72 TCG .126 .087 1 —
12 300 72 TCG .126 .087 30mm 2/7/42 & 2/10/60 †
Saw Blades
Industrial Quality • Carbide Tipped
14 350 54 TCG .137 .106 1 —
14 350 72 TCG .137 .098 1 —
14 350 72 TCG .137 .098 30mm 2/7/42 & 2/10/60
14 350 84 TCG .137 .098 1 —
16 400 96 TCG .137 .098 1 —
18 450 108 TCG .158 .110 1 —
18 450 108 TCG .158 .110 30mm 2/7/42 & 2/10/60
20 500 120 TCG .173 .110 1 —
• 15º Hook Angle (Tool # 694001 Only)
† For Altendorf,® Omega, SCMI,® and Striebig® sliding table saws.
* P.H. denotes pin-hole configuration, if applicable. Example: // = @ mm dia. on mm circle.
! Before use, read saw blade safety guidelines on pages 266-268. www.amanatool.com
B
10° 10°
15°
ØD C
10°
Our trim blade, suitable for use on table saws, sliding table saws, radial arms,
and miter saws of all types, leaves a super-smooth finish when cutting hard or
softwood. It is especially suited to trimming and sizing veneers and laminates,
in single sheets or in stacks. The alternate top bevel grind and high tooth counts
produce excellent, chip-free cuts. The 10° hook angle provides effortless feeding.
Soft/Hardwood Crosscut Cabinet Plywood Rip/Crosscut
ØD ‘B’ Kerf ‘C’ Plate
Inch mm Teeth Grind Inch Inch Bore *P.H. Tool No.
7 180 58 ATB .118 .079 5/8 —
8 200 64 ATB .118 .079 5/8 —
– 220 64 ATB .118 .079 30mm 2/7/42 +
10 250 80 ATB .126 .087 5/8 —
10 250 80 ATB .126 .087 30mm 2/7/42 & 2/10/60
12 300 96 ATB .126 .087 1 —
12 300 96 ATB .126 .087 30mm 2/7/42 & 2/10/60
14 350 108 ATB .137 .098 1 —
14 350 108 ATB .137 .098 30mm 2/7/42 & 2/10/60
16 400 120 ATB .137 .098 1 —
18 450 132 ATB .157 .110 1 —
+ For Holz-Her® 220mm Panel Saws.
ATB
TCG ATB
B B
0.3
15° 45° 45°
10° 10°
TCG
ØD C C
10°
Thin-kerf blades require less power because they have thinner plates and
narrower tips. This trim blade is ideal for jobsite table saws and the various
miter saws for that reason. Available in either alternate top bevel grind for
cutting hardwood, softwood and plywood, or triple-chip grind for chipboard
and laminate-covered material. The TC grind is also suitable for cutting thin
Plexiglas,® masonite, and plastics. Use of stabilizers is recommended when
cutting stock over 3/4" thick.
ATB ATB TCG TCG
Industrial Quality • Carbide Tipped
Saw Blades
Combination Cabinet Plywood Plastic Laminate MDF/Fiberboard
Rip/Crosscut Rip/Crosscut Single & Double Sided
ØD ‘B’ Kerf ‘C’ Plate
Inch mm Teeth Grind Inch Inch Bore Tool No.
8 200 64 ATB .090 .062 5/8
10 250 80 ATB .090 .062 5/8
10 250 100 ATB .090 .062 5/8
12 300 96 ATB .090 .062 1
14 350 108 ATB .090 .062 1
8 200 64 TCG .090 .062 5/8
10 250 80 TCG .090 .062 5/8
10 250 100 TCG .090 .062 5/8
12 300 96 TCG .090 .062 1
14 350 108 TCG .090 .062 1
* P.H. denotes pin-hole configuration, if applicable. Example: // = @ mm dia. on mm circle.
! Before use, read saw blade safety guidelines on pages 266-268.
B
10° 10°
15°
ØD C
10°
Thin kerf blades are designed for miter smooth cuts; less drag on bearings and
brake and reduces stock loss on expensive woods and veneer plywoods. Not
recommended to cut stock over 3/4" without the use of a stabilizer.
Soft/Hardwood Cabinet Plywood
Crosscut Rip/Crosscut
ØD ‘B’ Kerf ‘C’ Plate
Inch mm Teeth Grind Inch Inch Bore Tool No.
10 250 80 ATB .090 .062 5/8
12 300 96 ATB .090 .062 1
14 350 108 ATB .090 .062 1
15 375 100 ATB .104 .079 1
B
0.3
15° 45° 45°
Saw Blades
Industrial Quality • Carbide Tipped
ØD C
10°
Thin kerf blades are designed for miter smooth cuts; less drag on bearings and
brake and reduces stock loss on expensive woods and veneer plywoods. Not
recommended to cut stock over 3/4" without the use of a stabilizer. TCG grind
can also be used for cutting thin Plexiglas,® masonite and plastics.
Plastic Laminate
Single & Double Sided
ØD ‘B’ Kerf ‘C’ Plate
Inch mm Teeth Grind Inch Inch Bore Tool No.
10 250 80 TCG .090 .062 5/8
! Before use, read saw blade safety guidelines on pages 266-268. www.amanatool.com
0.25
20° 20°
15°
ØD C
NEG 2°
Designed especially for use on the various styles of miter saws, as well as
radial arm saws, this blade cuts crisp, chip-free miters in hardwood and
softwood, in moldings and picture-frame stock. All these blades feature the
alternate top bevel plus raker grind (4 ATB plus 1 raker), 2° negative hook
angle, and a high tooth count to produce exactly what you want for tight
miters – extremely smooth cuts.
Soft/Hardwood Cabinet Plywood
Crosscut Rip/Crosscut
*ØD ‘B’ Kerf ‘C’ Plate
Inch Teeth Grind Inch Inch Bore Machine Type Tool No.
10 60 4&1 .115 .087 5/8 All Types
12 100 4&1 .134 .110 5/8 Pistorius, CTD
12 80 4&1 .122 .110 5/8 Pistorius, CTD
12 80 4&1 .122 .110 1 Dewalt, Hitachi
14 100 4&1 .150 .118 5/8 Pistorius, CTD
14 100 4&1 .150 .118 1 Makita
15 100 4&1 .118 .098 1 Hitachi
* True “Imperial” Sizes.
B
35° 35° 35°
ØD C
NEG 5°
The California triple chip grind is the choice in the door and window
manufacturing industry, and in framing shops everywhere. Its cuts are crisp and
clean in wood, and burr-free in aluminum and other non-ferrous metals. This
blade has a very high tooth count, a 5° negative hook, and a stout plate for
smooth cuts and long tool life. It works in miter saws, compound miter saws, and
sliding compound saws.
Soft/Hardwood Crosscut Non-Ferrous Alloys
Industrial Quality • Carbide Tipped
Saw Blades
*ØD ‘B’ Kerf ‘C’ Plate
Inch Teeth Grind Inch Inch Bore Machine Type Tool No.
10 96 C-TCG .125 .100 5/8 Pistorius, CTD
12 90 C-TCG .135 .110 5/8 Pistorius, CTD
12 108 C-TCG .135 .110 1 Pistorius, CTD
* True “Imperial” Sizes.
! : NEVER attempt to cut ferrous metals (steel, iron, etc.) with these saw blades.
When cutting non-ferrous metals, a coolant or blade wax should be used and proper
clamping devices employed.
! Before use, read saw blade safety guidelines on pages 266-268.
0.3
15° 30° 30°
ØD C
NEG 6° R 8mm
This specially designed saw blade makes exceptionally smooth cuts in melamine
and other coated boards, without the need for scoring. The unique hollow grind,
which pairs a triple-chip tooth with a raker tooth that’s ground to a concave
profile, produces crisp, clean cuts. The grind is commonly used in vertical panel
saws, such as those made by Striebig® and Holz-Her.® The negative hook angle is
particularly suitable for vertical panel saws. Melamine
Single & Double Sided
ØD ‘B’ Kerf ‘C’ Plate
Inch mm Teeth Grind Inch Inch Bore *P.H. Machines Tool No.
— 220 42 HG .126 .087 30mm 2/7/42 Holz-Her® †
10 253 48 HG .126 .087 5/8 — —
10 253 48 HG .126 .087 30mm 2/7/42 & 2/10/60 Holz-Her®
12 303 60 HG .126 .087 1 — —
12 305 60 HG .126 .087 5/8 — Pistorius
12 303 60 HG .126 .087 30mm 2/7/42 & 2/10/60 Holz-Her®
14 350 72 HG .126 .087 30mm 2/7/42 & 2/10/60 —
† For Holz-Her® 220mm panel saws.
B
0.3
15° 30° 30°
ØD C
10° R 8mm
This specially designed saw blade makes exceptionally smooth cuts in melamine
and other coated boards, without the need for scoring. The unique hollow grind,
which pairs a triple-chip tooth with a raker tooth that’s ground to a concave
profile, produces crisp, clean cuts. The positive hook angle is particularly
suitable for use on horizontal sliding table saws such as those made by Striebig,®
Altendorf,® SCM and Holz-Her.® Melamine
Single & Double Sided
ØD ‘B’ Kerf ‘C’ Plate
Saw Blades
Industrial Quality • Carbide Tipped
Inch mm Teeth Grind Inch Inch Bore *P.H. Tool No.
— 220 42 HG .126 .087 30mm 2/7/42 †
10 253 48 HG .126 .087 30mm 2/7/42 & 2/10/60
12 303 60 HG .126 .087 30mm 2/7/42 & 2/10/60
† For Holz-Her® 220mm panel saws.
* P.H. denotes pin-hole configuration, if applicable. Example: // = @ mm dia. on mm circle.
! Before use, read saw blade safety guidelines on pages 266-268. www.amanatool.com
B
25° 25°
15°
ØD C
NEG 6°
Designed specifically to cut melamine, this blade does just that without chipping
on the top or bottom edges. (Your table saw must be properly tuned, of course.)
The special “High-ATB” grind (with 25° bevels) slices cleanly through fragile
surface coatings like melamine and laminate. Coupled with a thick, heavy-duty
plate for added stability, this blade produces extremely smooth cuts. It is easily
resharpened. Melamine
Single & Double Sided
ØD ‘B’ Kerf ‘C’ Plate
Inch mm Teeth Grind Inch Inch Bore *P.H. Tool No.
8 200 64 H-ATB .110 .087 5/8 —
— 220 42 H-ATB .110 .087 30mm 2/7/42 †
10 250 80 H-ATB .126 .102 5/8 —
10 250 80 H-ATB .126 .102 30mm 2/7/42 & 2/10/60
12 300 96 H-ATB .126 .102 1 —
12 300 96 H-ATB .126 .102 30mm 2/7/42 & 2/10/60
Industrial Quality • Carbide Tipped
Saw Blades
14 350 108 H-ATB .126 .102 1 —
14 350 108 H-ATB .126 .102 30mm 2/7/42 & 2/10/60
16 400 120 H-ATB .150 .126 1 —
The 8" blade can be used on vertical type panel saws, such as ‘Safety Speed Cut’, etc.
† For 220mm Holz-Her® Panel Saws.
* P.H. denotes pin-hole configuration, if applicable. Example: // = @ mm dia. on mm circle.
! Before use, read saw blade safety guidelines on pages 266-268.
B
35° 35°
15°
ØD C
NEG 2°
Alterations to the geometry and plate thickness provide improved results in
certain melamine boards. The bevel angle of the ATB grind is far more
acute (35°), and the plate is thinner than our standard melamine blades as
seen on the previous page. Melamine
Single & Double Sided
ØD ‘B’ Kerf ‘C’ Plate
Inch mm Teeth Grind Inch Inch Bore *P.H. Tool No.
10 250 80 H-ATB .118 .087 5/8 —
10 250 80 H-ATB .118 .087 30mm 2/7/42 & 2/10/60
12 300 96 H-ATB .118 .087 1 —
12 300 96 H-ATB .118 .087 30mm 2/7/42 & 2/10/60
B
0.3
15° 45° 45°
ØD C
0° Hook
This blade is designed for cutting plastic laminate, Plexiglas,® and solid surface
materials such as Dupont Corian,® Wilsonart,® Gibraltar® & Fountainhead.® The
triple chip grind is especially configured to leave a swirl-free cut in solid surface
materials. Thick, stable plate reduces vibration that degrades the cut and
shortens tool life. The blade is suitable for a variety of saw configurations. The
0° hook angle virtually eliminates self-feeding when used with a radial arm saw. Solid Surface Plastic Laminate
Single & Double Sided
ØD ‘B’ Kerf ‘C’ Plate
Inch mm Teeth Grind Inch Inch Bore *P.H. Tool No.
10 250 72 MTC .126 .095 5/8 —
10 250 72 MTC .126 .095 30mm 2/7/42 & 2/10/60
Saw Blades
Industrial Quality • Carbide Tipped
12 300 84 MTC .126 .095 1 —
12 300 84 MTC .126 .095 30mm 2/7/42 & 2/10/60
14 350 96 MTC .126 .102 1 —
16 400 108 MTC .126 .102 1 —
* P.H. denotes pin-hole configuration, if applicable. Example: // = @ mm dia. on mm circle.
! Before use, read saw blade safety guidelines on pages 266-268. www.amanatool.com
B
0.3
15° 45° 45°
ØD C
NEG 2°
When cutting acrylics and plastics, “chip-welding” – a melting of the material –
is a concern. But not with these Non-Melt blades. With a modified triple-chip
grind and a 2° negative hook angle, they produce less heat than a standard
blade, leaving a crisp and smooth edge in acrylic sheets, corrugated
polypropolyene, HDPE, Lexan,® Plexiglas,® polycarbonates and other plastics.
Acrylic & Non-Melt Plastic
ØD ‘B’ Kerf ‘C’ Plate
Inch mm Teeth Grind Inch Inch Bore *P.H. Tool No.
8 200 64 MTC .098 .070 5/8 —
— 220 64 MTC .126 .079 30mm 2/7/42 †
10 250 80 MTC .100 .070 5/8 —
10 250 80 MTC .100 .070 30mm 2/7/42 & 2/10/60
12 300 96 MTC .125 .102 1 —
12 300 96 MTC .125 .102 30mm 2/7/42 & 2/10/60
14 350 108 MTC .145 .118 1 —
16 400 120 MTC .145 .118 1 —
† For Holz-Her® 220mm panel saws.
Non-Melt / Plastic Blades
Industrial Quality • Carbide Tipped
Saw Blades
Non-Ferrous Blades
see page 243
* P.H. denotes pin-hole configuration, if applicable. Example: // = @ mm dia. on mm circle.
! Before use, read saw blade safety guidelines on pages 266-268.
B
0.3
15° 45° 45° THICK
ØD
ALUMINUM
C More than 1/4"
NEG 6°
T
Thanks to its special carbide formulation and blade geometry, this is the ideal blade for
cutting relatively and non-ferrous metal bars such as copper,
brass, bronze and lead. It also is good for cutting extrusions and profiles. The negative
hook angle (-6°), triple-chip grind and thick plate combine to produce a superior finish.
The blade can also be used to cut other “difficult” materials such as plastic, PVC tubing
and fiberglass. Use a coolant or blade wax and clamp down the workpiece when cutting
Non-Ferrous Alloys Phenolic & Hard Plastic
non-ferrous metals.
ØD ‘B’ Kerf ‘C’ Plate
Inch mm Teeth Grind Inch Inch Bore *P.H. Tool No.
8 200 48 TCG .110 .087 5/8 —
10 250 60 TCG .126 .102 5/8 —
10 250 60 TCG .126 .102 30mm 2/7/42 & 2/10/60
12 300 72 TCG .126 .102 1 —
12 300 72 TCG .126 .102 30mm 2/7/42 & 2/10/60
14 350 84 TCG .126 .102 1 —
16 400 96 TCG .150 .126 1 —
18 450 108 TCG .157 .134 1 —
B
0.3
15° 45° 45°
THIN
ØD
ALUMINUM
C
NEG 6° Less than 1/4"
A product of the same design & engineering as the above blade, this one
is designed specifically for cutting relatively and
non-ferrous extrusions and frames. Use a coolant or blade wax and clamp
down the workpiece when cutting non-ferrous metals.
Non-Ferrous Alloys Phenolic & Hard Plastic
ØD ‘B’ Kerf ‘C’ Plate
Inch mm Teeth Grind Inch Inch Bore *P.H. Tool No.
7 180 58 TCG .110 .087 5/8 — —
8 200 64 TCG .110 .087 5/8 — —
9 230 60 TCG .110 .087 5/8 — —
10 250 80 TCG .126 .102 5/8 — —
10 250 100 TCG .126 .102 5/8 — —
10 250 80 TCG .126 .102 30mm 2/7/42 & 2/10/60 —
Saw Blades
Industrial Quality • Carbide Tipped
12 300 96 TCG .126 .102 1 — —
12 300 96 TCG .126 .102 30mm 2/7/42 & 2/10/60 —
14 350 100 TCG .146 .118 5/8 — Pistorious
14 350 100 TCG .122 .098 25mm — Makita †
14 350 108 TCG .126 .102 1 — —
14 350 108 TCG .126 .102 30mm 2/7/42 & 2/10/60 —
15 375 100 TCG .120 .098 1 — Hitachi •
16 400 120 TCG .150 .126 1 — —
18 450 120 TCG .150 .126 1 — —
20 500 120 TCG .174 .134 1 — —
20 500 120 TCG .174 .152 30mm 2/7/42 & 2/10/60 —
• For Hitachi Miter box (Thin Kerf). † For Makita Miter box.
* P.H. denotes pin-hole configuration, if applicable. Example: // = @ mm dia. on mm circle.
! Before use, read saw blade safety guidelines on pages 266-268. www.amanatool.com
B
0.25
10° 10°
15°
ØD C
0° Hook
Designed especially for radial arm saws, sliding compound miter saws
and others with the blade above the workpiece, these blades minimize
the tendency to self-feed. They feature a low tooth count and an ATB
plus raker grind (typically used on combination blades). Excellent choice
for cutting hardwood and softwood. For plywood, use tool #610720,
which has a high tooth count and an ATB grind.
Combination Cabinet Plywood
Rip/Crosscut Rip/Crosscut •
ØD ‘B’ Kerf ‘C’ Plate
Inch mm Teeth Grind Inch Inch Bore Tool No.
10 250 24 ATB .134 .095 5/8
10 250 72 ATB .126 .095 5/8 •
12 300 36 ATB .150 .110 1
14 350 40 4&1 .165 .110 1
14 350 42 ATB .165 .110 1
16 400 40 4&1 .165 .118 1
16 400 48 ATB .165 .118 1
• For plywood use #610720.
®
B
10° 10°
15° See table below for
grind & hook angle.
ØD C
a°
Designed specifically for the Holz-Her® 220mm panel saws. Blades are available
for general purpose cutting, crosscutting and sawing laminates, melamine,
acrylic and other plastics and solid surface materials. Blades with tips made of
the high-performance DITEC™ carbide, an Amana Tool® exclusive, are also
included in this line.
Soft/Hardwood Cabinet Plywood Plastic Laminate Melamine Solid Surface Acrylic & Non-Melt Plastic
Crosscut Rip/Crosscut Single & Double Sided Single & Double Sided
Industrial Quality • Carbide Tipped
Saw Blades
ØD ‘B’ Kerf ‘C’ Plate
mm Teeth Grind a° Inch Inch Bore *P.H. Application Tool No.
220 34 ATB 10˚ .118 .079 30mm 2/7/42 General Purpose
220 64 ATB 10˚ .118 .079 30mm 2/7/42 Crosscut Wood
220 64 TCG 10˚ .118 .079 30mm 2/7/42 Laminate/MDF
220 64 TCG -2˚ .126 .0791 30mm 2/7/42 Plastic Non-Melt
220 42 HG -6˚ .126 .087 30mm 2/7/42 Melamine
220 42 H-ATB -6˚ .110 .087 30mm 2/7/42 Melamine
220 64 H-ATB 0˚ .126 .079 30mm 2/7/42 DITEC™ Melamine †
220 64 TCG 10˚ .126 .079 30mm 2/7/42 DITEC™ Laminate/MDF †
220 64 TCG 0˚ .126 .079 30mm 2/7/42 DITEC™ Solid Surface †
† Denotes high-performance DITEC™ carbide.
* P.H. denotes pin-hole configuration, if applicable. Example: // = @ mm dia. on mm circle.
! Before use, read saw blade safety guidelines on pages 266-268.
™
Resistance to abrasion is the single most important characteristic of the
tungsten carbide used for saw teeth. DITEC™ saw blades feature carbide tips
with greater hardness, with no loss of toughness, than any previous formulation.
Using this carbide, Amana Tool® has produced a line of laser cut saw blades that
last 2 to 3 times longer than standard carbide formulations.
The laser cut saw bodies feature expansion slots for great stability and low • For maintenance grinding, use fine grit (D400 to
noise levels. Every saw blade is analyzed by an innovative and sophisticated D600) diamond wheels. To match the factory
computerized system to ensure faultless quality control. Runout tolerances are grind, use a slower than normal feed rate.
maintained at .002" or less. Exceptionally sharp edges are ground and honed
• Damaged teeth can be replaced by any grade of
on the carbide tips with 400 and 600 grit diamond wheels. The surface quality
carbide tooth. Replacing of a large number of teeth
of the saw teeth is second to none.
will, of course, shorten the life of the saw blade.
In extensive testing, were
• Since the carbide in the DITEC™ is harder than
recorded. The random tests were performed by outside firms running panel saws
other carbides, it is critical that you protect them
2 to 3 shifts per day.
from “thermal shock” if an adjacent tooth is
replaced. Heat absorbed during the brazing
process will seriously degrade the DITEC™ carbide.
™
B
25° 25°
15° HARDER
GRADE
ØD CARBIDE
C
0° Hook
If you cut melamine on a regular basis, this is the blade you should use. It has
Saw Blades
Industrial Quality • Carbide Tipped
the same features as our regular melamine blades – the MB series and MSB
series (see page 240) – such as a thicker than standard plate, high tooth count,
and the H-ATB grind, but this blade has long-lasting DITEC™ carbide tips.
Melamine
Single & Double Sided
ØD ‘B’ Kerf ‘C’ Plate
Inch mm Teeth Grind Inch Inch Bore *P.H. Tool No.
— 220 64 H-ATB .126 .079 30mm 2/7/42 †
10 250 72 H-ATB .126 .102 5/8 —
10 250 72 H-ATB .126 .102 30mm 2/7/42 & 2/10/60
12 300 84 H-ATB .126 .102 1 —
12 300 84 H-ATB .126 .102 30mm 2/7/42 & 2/10/60
† For Holz-Her® 220mm panel saws.
* P.H. denotes pin-hole configuration, if applicable. Example: // = @ mm dia. on mm circle.
! Before use, read saw blade safety guidelines on pages 266-268. www.amanatool.com
™
TCG
TCG ATB ATB
B B
0.3
10° 10° HARDER
15° 45° 45° GRADE
CARBIDE ATB
ØD C C
10°
These high-performance crosscutting blades are designed primarily for use
in sliding table saws, such as Striebig,® Altendorf,® SCMI® & Delta® models.
They are suitable for use in regular table saws & radial arm saws. The
blades incorporate an exceptional array of features: high tooth count, a
choice of alternate top bevel or triple chip grind, expansion slots and
turbulence-dampening copper plugs. The DITEC™ carbide tips add ATB ATB TCG
exceptional sharpness and long tool life to these features. Choose the ATB Soft/Hardwood Cabinet Plywood Plastic Laminate
grind for solid wood or plywood, the TC grind for MDF, OSB, HDF, single or Crosscut Rip/Crosscut Single & Double Sided
double-sided melamine and plastic laminated panels.
ØD ‘B’ Kerf ‘C’ Plate
Inch mm Teeth Grind Inch Inch Bore *P.H. Tool No.
12 300 72 ATB .126 .087 1 —
12 300 72 ATB .126 .087 30mm 2/7/42 & 2/10/60 †
12 300 72 TCG .126 .087 1 —
12 300 72 TCG .126 .087 30mm 2/7/42 & 2/10/60 †
12 300 96 ATB .126 .087 1 —
12 300 96 ATB .126 .087 30mm 2/7/42 & 2/10/60 †
12 300 96 TCG .126 .087 1 —
12 300 96 TCG .126 .087 30mm 2/7/42 & 2/10/60 †
14 350 84 ATB .137 .098 1 —
14 350 84 ATB .137 .098 30mm 2/7/42 & 2/10/60
14 350 84 TCG .137 .098 1 —
14 350 84 TCG .137 .098 30mm 2/7/42 & 2/10/60
14 350 108 ATB .137 .098 30mm 2/7/42 & 2/10/60
14 350 108 TCG .137 .098 1 —
14 350 108 TCG .137 .098 30mm 2/7/42 & 2/10/60
† Fits Striebig® vertical panel saw.
™ TCG
ATB
TCG ATB
B B
0.3
10° 10° HARDER
15° 45° 45° GRADE ATB
CARBIDE
ØD C C
10°
This series of 10-inch cut-off and trim blades has the same features as
Industrial Quality • Carbide Tipped
Saw Blades
our regular cut-off and trim blades, including high tooth count, 10° hook
angle and a choice of alternate top bevel or triple chip grind, expansion
slots and turbulence-dampening copper plugs. The DITEC™ carbide tips
add exceptional sharpness and long tool life to these features. These ATB ATB TCG
blades are suitable for table saws, radial arm saws and all miter saws. Soft/Hardwood Cabinet Plywood Plastic Laminate
Crosscut Rip/Crosscut Single & Double Sided
ØD ‘B’ Kerf ‘C’ Plate
Inch mm Teeth Grind Inch Inch Bore *P.H. Tool No.
10 250 60 TCG .126 .087 5/8 —
10 250 80 ATB .126 .087 5/8 —
10 250 80 TCG .126 .087 5/8 —
10 250 80 TCG .126 .087 30mm 2/7/42 & 2/10/60
* P.H. denotes pin-hole configuration, if applicable. Example: // = @ mm dia. on mm circle.
! Before use, read saw blade safety guidelines on pages 266-268.
™
B
0.4
15° 45° 45° HARDER
GRADE
ØD C CARBIDE
0° Hook
These blades are designed for cutting plastic laminate, Plexiglas,® and solid
surface materials such as Dupont Corian,® Wilsonart,® Gibraltar® & Fountainhead.®
The DITEC™ carbide tips are ground in a triple chip geometry unique to this
blade, and leave a swirl-free cut in solid surface materials. The thick, stable
plate reduces vibration that degrades the cut and shortens tool life. The blade is
Solid Surface
suitable for a variety of saw configurations. Its 0° hook angle virtually eliminates
self-feeding when used with a radial arm saw.
ØD ‘B’ Kerf ‘C’ Plate
Inch mm Teeth Grind Inch Inch Bore *P.H. Tool No.
— 220 64 S-TCG .126 .102 30mm 2/7/42 †
10 250 72 S-TCG .126 .102 5/8 —
12 300 84 S-TCG .126 .102 1 —
12 300 84 S-TCG .126 .102 30mm 2/7/42, 2/10/60
† For Holz-Her® 220mm panel saws.
™
B
5° 5°
15° HARDER
GRADE
ØD CARBIDE
12° C
Used on panel saws or sliding table saws with separate scoring units for
chip-free cuts on both sides of the material. Adjustable scoring sets consist
of two 12-tooth saw blades with shims to adjust the kerf width (2.8mm to
3.6mm). Used in combination with our industrial saw blades with standard Scoring Particleboard &
Double Sided Laminate
kerf (example #612721, #DT12721, etc.).
ØD Teeth Grind ‘B’ Kerf ‘C’ Plate Bore Machine Application Tool No.
120mm 12 x 2 ATB 2.8mm to 3.6mm 2mm(x2) 22mm Altendorf,® Martin, Mrozek
120mm 12 x 2 ATB 2.8mm to 3.6mm 2mm(x2) 20mm Altendorf,® Martin, Mrozek
Adjustable scoring sets with bore can be converted to either 3/4" bore by ordering two each bushings,
or to bore by ordering two each bushings.
Saw Blades
Industrial Quality • Carbide Tipped
Replacement 5-piece shim set (0.6mm, .10mm, .20mm (2) and 2.8mm) order No. . Will fit 20mm or 22mm scoring sets.
* P.H. denotes pin-hole configuration, if applicable. Example: // = @ mm dia. on mm circle.
! Before use, read saw blade safety guidelines on pages 266-268. www.amanatool.com
™
B
5° 5°
12° HARDER
GRADE
ØD CARBIDE
C
8°
Used on panel saws with separate scoring units for chip-free cuts on both sides
of the material. With conical type scoring blades, the kerf width changes with
depth of penetration. Used in combination with our industrial saw blades ‘7’ Scoring Particleboard &
series only (#714721, etc.). Also used in combination with the DITEC™ series Double Sided Laminate
panel saw main blades. Kerf range should match the main blade.
ØD Teeth Grind ‘B’ Kerf ‘C’ Plate Bore Machine Application Tool No.
120mm 24 Conical 3.2mm to 4.2mm 2.2mm 20mm SCMI,® Altendorf ®
120mm 24 Conical 4.4mm to 5.4mm 2.8mm 20mm Altendorf,® Martin, SCMI®
B
10° 10°
15°
ØD C
10°
Replacement trim saw blades for edgebanding machines feature alternate top
bevel grind on the teeth, 10° hook angle, and standard thickness plates. Most Soft/Hardwood
Crosscut
machines require two blades.
ØD ‘B’ Kerf ‘C’ Plate
mm Teeth Grind Inch Inch Bore Tool No.
150mm 30 ATB .126 .087 30mm
180mm 58 ATB .126 .087 20mm
663000 is for IDM-137 and Ocmac Chica 290 edgebanders, and others.
663010 is for Olimpic Nova-2 edgebanders, and others.
Industrial Quality • Carbide Tipped
Saw Blades
! Before use, read saw blade safety guidelines on pages 266-268.
™
Adjustments can easily be made while the scoring set is mounted on the
machine! Adjusting the scoring set is quick and easy, simply turn the dial to
adjust the width of the score. Eliminates the need for shims, endless measuring,
reassembling, testing and adjusting to obtain the required width.
Kerf Repl. Set
ØD mm Teeth Bore Screws Tool No.
100mm 2.8 to 3.6 12x2 22mm & 3/4" 67020 *
120mm 2.8 to 3.6 12x2 20mm 67020
120mm 2.8 to 3.6 12x2 15mm, 22mm & 3/4" 67021 **+
125mm 2.8 to 3.6 12x2 22mm & 3/4" 67020 *
Re-Sharpening Adapter
100mm 12x2 #EZA-08 for 100mm
120mm 12x2
125mm 12x2
For 100mm
Saw Blades
Industrial Quality • Carbide Tipped
For 120mm and 125mm
Re-Sharpening Adapter
#EZA-10 for 120mm and 125mm
For 100mm
For 120 and 125mm
* Includes bushing part #BEZ-01 from 22mm to 3/4."
** Fits additional machines: Casolin Astra Top, Casadei Shark & Lazzari.
+ Chamfered dial for SCM machine. #BEZ-015 from 22mm to 15mm. Panel Sizing/Scoring Scoring Particleboard &
Double Sided Laminate
! Before use, read saw blade safety guidelines on pages 266-268. www.amanatool.com
B
5° 5°
12°
ØD
C
8°
This conical-type scoring blade is similar to the DITEC™ scoring blade, but Scoring Particleboard &
Double Sided Laminate
features our standard carbide tips. Match the kerf width of your main blade by
adjusting the scoring blade’s cutting depth. Range typically is 1mm (for example,
from 4.4mm to 5.4mm). Select a scoring blade with a range matching your main
blade’s kerf width. Use in combination only with our ‘7’ series industrial saw
blades (#714721, 716961, etc.). Use also in combination with the new DITEC™
panel saw blades.
ØD ‘B’ Kerf Range ‘C’ Plate Bore †Machine
mm Teeth Grind mm Inches mm Inches mm Application Tool No.
100 20 ATB 3.2 to 4.2 .125 to .165 2.2 .086 20 Various
120 24 ATB 3.2 to 4.2 .125 to .165 2.2 .086 20 Various
125 24 ATB 4.4 to 5.4 .173 to .212 2.8 .110 20 Martin, Mayer-Lombach, Giben
150 24 ATB 4 to 5.0 .157 to .196 2.8 .110 20 Various
150 36 ATB 4.4 to 5.4 .173 to .212 2.8 .110 20 Shelling, Holzma
160 36 ATB 4.4 to 5.4 .173 to .212 2.8 .110 20 Gabbiani
200 36 ATB 4.4 to 5.4 .173 to .212 2.8 .110 20 Shelling, Holzma
Standard bore is 20mm. Other kerf sizes available, please inquire.
B
5° 5°
15°
ØD
12° C Scoring Particleboard &
Double Sided Laminate
Used on panel saws and sliding table saws with separate scoring units for
chip-free cuts on both sides of the material. Adjustable scoring sets consist of
two 12-tooth saw blades with shims to adjust the kerf width (2.8mm to 3.6mm).
Used in combination with our industrial saw blades ‘6’ series only. (Example:
#614721, #616961, etc.).
ØD ‘B’ Kerf Range ‘C’ Plate Bore †Machine
mm Teeth Grind mm Inches mm Inches mm Application Tool No.
Industrial Quality • Carbide Tipped
Saw Blades
100 12x2 ATB 2.8 to 3.6 .110 to .142 2(x2) .078(x2) 20 Shelling
100 12x2 ATB 2.8 to 3.6 .110 to .142 2(x2) .078(x2) *22 Altendorf,® Delta,® Martin, Mrozek, Panhans
120 12x2 ATB 2.8 to 3.6 .110 to .142 2(x2) .078(x2) 20 SCMI®
120 12x2 ATB 2.8 to 3.6 .110 to .142 2(x2) .078(x2) *22 Altendorf,® Martin, Mrozek
125 12x2 ATB 2.8 to 3.6 .110 to .142 2(x2) .078(x2) 20 Griggio
† Due to many different scoring machine sizes (particularly arbor sizes), it is advisable to measure both the scoring and main blades that are
presently on your machine (diameter, bore, kerf, etc.).
* Adjustable scoring sets with 22mm bore can be converted to either 3/4" bore by ordering two each #BU-130 bushings, or to 20mm bore by
ordering two each #BU-140 bushings.
Replacement 5-piece shim set (0.6mm, .10mm, .20mm (2) and 2.8mm) order No. ‘Shim Set’. Will fit 20mm or 22mm scoring sets.
! Before use, read saw blade safety guidelines on pages 266-268.
dYnamic Panel SawinG Manufacturing Technology:
TCG (Triple Chip Grind) • Extended Life HARDER
GRADE
CARBIDE
Balanced Dynamic Pressure
G 6.3 Straightness
15° 45° 45° 12°
5° 5°
ØD 5° 5°
ØD
18°
8° C
Main Saw for Panel Sizing Laminated Boards Scorer for Panel Sizing
Machine ØD Teeth Kerf/Plate Bore ØD Teeth Fits Main Bore
Style mm Count mm mm *P.H. Tool No. mm Count Saw Kerf mm *P.H. Tool No.
Anthon LNA 400 72 4.4/3.2 60 2/11/85 DT400T721-60 180 30 4.4/5.4 20 — DT180T30-20
Gabbiani 355 72 4.4/3.0 80 4/9/100, 2/7/110 DT355T721-80 200 36 4.4/5.4 65 4/9/110 DT200T36-65
380 60 4.4/3.2 60 4/9/100 DT380T601-60 160 36 4.4/5.4 55 3/7/66 DT160T36-55
400 60 4.4/3.2 80 4/9/100, 2/7/110 DT400T601-80 200 36 4.8/5.8 65 2/9/100 DT200T36-65A
400 72 4.4/3.2 80 — DT400T721-80 200 36 4.8/5.8 65 2/9/100 DT200T36-65A
500 72 4.8/3.5 80 2/8/110 & 2/10/130 DT500T721-80A 160 36 4.4/5.4 55 3/7/66 DT160T36-55
Giben 450 72 4.4/3.2 75 — DT450T721-75
Giben 500 72 5.0/3.5 75 — DT500T721-75B
Giben 550 72 5.0/3.5 100 — DT550T721-100B
Giben Junior 305 60 4.4/3.2 75 — DT305T601-75 125 24 4.4/5.4 45 — DT125T24-45
Giben Trend 355 54 4.4/3.2 75 — DT355T541-75 125 24 4.4/5.4 45 — DT125T24-45
Giben Trend 355 72 4.4/3.2 75 — DT355T721-75 125 24 4.4/5.4 45 — DT125T24-45
Giben Trend 400 60 4.4/3.2 75 4/15/105 DT400T601-75 125 24 4.4/5.4 45 — DT125T24-45
Holz-Her® 220 64 3.0/2.2 30 2/7/42 DT220T641
Holzma 355 72 4.4/3.2 60 2/14/100 DT355T721-60 180 30 4.4/5.4 45 — DT180T30-45
380 60 4.4/3.2 60 4/9/100, 2/14/100 DT380T601-60 200 36 4.4/5.4 65 4/9/110 DT200T36-65
420 72 4.4/3.2 60 — DT420T721-60 200 36 4.4/5.4 45 — DT200T36-45
420 72 4.8/3.5 60 — DT420T721-60A 200 36 4.8/5.8 45 — DT200T36-45A
450 72 4.4/3.2 60 — DT450T721-60 200 36 4.4/5.4 45 — DT200T36-45
500 60 4.8/3.5 60 — DT500T601-60A 200 36 4.8/5.8 45 — DT200T36-45A
500 72 4.8/3.5 60 2/11/115 DT500T721-60A 200 36 4.8/5.8 45 — DT200T36-45A
500 72 5.0/3.5 60 — DT500T721-60B 200 36 4.8/5.8 45 — DT200T36-45A
600 72 5.8/4.0 60 2/19/120, 2/11/115 DT600T721-60 200 36 5.8/6.8 45 — DT200T36-45B
Mayer 355 54 4.4/3.0 30 — DT355T541-30
355 72 4.4/3.0 30 — DT355T721-30
400 72 4.4/3.2 30 — DT400T721-30
New Sigma 115 400 72 4.4/3.2 80 — DT400T721-80
New Sigma 90 355 54 4.4/3.2 30 — DT355T541-30 160 36 4.4/5.4 55 3/7/66 DT160T36-55
Panhans 305 48 4.4/3.2 30 — DT305T481-30 180 30 4.4/5.4 30 — DT180T30-30
355 54 4.4/3.2 30 — DT355T541-30 180 30 4.4/5.4 30 — DT180T30-30
355 72 4.4/3.0 30 — DT355T721-30 180 30 4.4/5.4 30 — DT180T30-30
Saw Blades
Industrial Quality • Carbide Tipped
* P.H. denotes pin-hole configuration, if applicable. Example: 2/10/60 = 2 @ 10mm dia. on 60mm circle.
r ! Warning: Before use, read saw blade safety guidelines on pages 266-268. www.amanatool.com 251
dYnamic Panel SawinG Manufacturing Technology:
TCG (Triple Chip Grind) • Extended Life HARDER
GRADE
CARBIDE
Balanced Dynamic Pressure
G 6.3 Straightness
15° 45° 45° 12°
5° 5°
ØD 5° 5°
ØD
18°
8° C
Main Saw for Panel Sizing Laminated Boards Scorer for Panel Sizing
Machine ØD Teeth Kerf/Plate Bore ØD Teeth Fits Main Bore
Style mm Count mm mm *P.H. Tool No. mm Count Saw Kerf mm *P.H. Tool No.
Prismatic No.1 400 72 4.4/3.2 75 4/15/105 DT400T721-75 160 36 4.4/5.4 45 3/17/170 DT160T36-45
Prismatic No.2 430 96 4.4/3.2 75 4/15/105 DT430T961-75 215 42 4.4/5.4 50 3/15/80 DT215T42-50
Prismatic No.2 430 96 4.4/3.2 50 3/15/80 DT430T961-50
Prismatic No.3 470 96 4.4/3.2 75 4/15/105 DT470T961-75 215 42 4.4/5.4 50 3/15/80 DT215T42-50
Prismatic No.3 500 72 4.4/3.2 75 — DT500T721-75 125 24 4.4/5.4 45 — DT125T24-45
Prismatic No.3 500 72 4.8/3.5 75 — DT500T721-75A 125 24 4.8/5.8 45 — DT125T24-45A
Prismatic No.3 550 72 5.0/3.5 100 — DT550T721-100B 180 30 5.0/6.0 55 — DT180T30-55
Schelling 350 72 4.4/3.2 30 — DT350T721-30
355 72 4.4/3.2 30 — DT355T721-30 200 36 4.4/5.4 20 — DT200T36-20
370 72 4.4/3.2 30 2/10/60 DT370T721-30 200 36 4.4/5.4 20 — DT200T36-20
400 60 4.4/3.2 30 — DT400T601-30 200 36 4.4/5.4 20 — DT200T36-20
400 72 4.4/3.2 30 — DT400T721-30 200 36 4.4/5.4 20 — DT200T36-20
450 72 4.4/3.2 30 2/12/94 DT450T721-30 200 36 4.4/5.4 20 — DT200T36-20
460 72 4.4/3.2 30 2/12/94 DT460T721-30
480 80 4.4/3.2 30 — DT480T801-30 200 36 4.4/5.4 20 — DT200T36-20
550 72 5.0/3.5 40 — DT550T721-40 200 36 5.0/6.0 20 — DT200T36-20A
Selco 355 72 4.4/3.2 80 4/9/100 DT355T721-80 200 36 4.4/5.4 65 4/9/110 DT200T36-65
2/14/110, 2/7/110
400 72 4.4/3.2 80 4/19/120, 2/9/130 DT400T721-80 200 36 4.4/5.4 65 4/9/110 DT200T36-65
400 72 4.4/3.2 80 2/9/130 DT400T721-2PH
430 72 4.4/3.2 80 4/19/120, 2/9/130 DT430T721-80 200 36 4.4/5.4 65 4/9/110 DT200T36-65
450 72 4.4/3.2 80 4/19/120, 2/9/130 DT450T721-80 200 36 4.4/5.4 65 4/9/110 DT200T36-65
450 72 4.8/3.5 80 4/19/120, 2/9/130 DT450T721-80A 200 36 4.8/5.8 65 4/9/110 DT200T36-65A
Sigma65K 305 72 4.4/3.2 80 4/9/100 DT305T721-80 160 36 4.4/5.4 55 3/7/66 DT160T36-55
2/14/110, 2/7/110
Sigma65K 380 72 4.4/3.5 80 4/9/120, 2/9/130 DT380T721-80 160 36 4.4/5.4 55 3/7/66 DT160T36-55
Sigma90 355 72 4.4/3.0 30 — DT355T721-30 160 36 4.4/5.4 55 3/7/66 DT160T36-55
Various 305 60 4.4/3.2 30 — DT305T601-30
Various 380 72 4.4/3.2 75 — DT380T721-75
Various 380 72 4.8/3.5 60 — DT380T721-60A
Various 430 72 4.4/3.2 30 — DT430T721-30
Various 450 72 4.8/3.5 80 — DT450T721-80A
Industrial Quality • Carbide Tipped
Saw Blades
Various 480 72 4.8/3.5 80 4/19/120 DT480T721-80A
Various 550 72 5.0/3.5 40 — DT550T721-40
* P.H. denotes pin-hole configuration, if applicable. Example: 2/10/60 = 2 @ 10mm dia. on 60mm circle.
252 r ! Warning: Before use, read saw blade safety guidelines on pages 266-268.
dYnamic Panel SawinG Manufacturing Technology:
ATB (Alternate Top Bevel) • Extended Life HARDER
GRADE
CARBIDE
Balanced Dynamic Pressure
G 6.3 Straightness
15° 12°
10° 10° 5° 5°
ØD 5° 5°
ØD
10° 8° C
Main Saw for Panel Sizing Laminated Boards Scorer for Panel Sizing
Machine ØD Teeth Kerf/Plate Bore ØD Teeth Fits Main Bore
Style mm Count mm mm *P.H. Tool No. mm Count Saw Kerf mm *P.H. Tool No.
Gabbiani 355 72 4.4/3.0 80 4/9/100 & 2/7/110 DT355T720-80 160 36 4.4/5.4 55 3/7/66 DT160T36-55
400 72 4.4/3.2 80 4/9/100 DT400T720-80 160 36 4.4/5.4 55 3/7/66 DT160T36-55
2/7/110 & 2/14/110
Giben 355 72 4.4/3.0 75 — DT355T720-75 125 24 4.4/5.4 45 — DT125T24-45
400 60 4.4/3.2 75 — DT400T600-75
400 72 4.4/3.2 75 4/15/115 DT400T720-75 125 24 4.4/5.4 45 — DT125T24-45
Giben Trend 355 54 4.4/3.0 75 — DT355T540-75 125 24 4.4/5.4 45 — DT125T24-45
Holzma 400 72 4.4/3.2 60 — DT400T720-60 200 36 4.4/5.4 45 — DT200T36-45
Mayer 305 48 4.4/3.0 30 — DT305T480-30 125 24 4.4/5.4 20 — DT125T24
Panhans 305 60 4.4/3.0 30 — DT305T600-30 125 24 4.4/5.4 20 — DT125T24
355 54 4.4/3.0 30 — DT355T540-30 125 24 4.4/5.4 20 — DT125T24
355 72 4.4/3.0 30 2/10/60 DT355T720-30 125 24 4.4/5.4 20 — DT125T24
450 72 4.4/3.2 30 2/10/60 DT450T720-30
Schelling 400 60 4.4/3.2 30 — DT400T600-30 200 36 4.4/5.4 20 — DT200T36-20
Various 430 72 4.4/3.2 30 — DT430T720-30
Saw Blades
Industrial Quality • Carbide Tipped
* P.H. denotes pin-hole configuration, if applicable. Example: 2/10/60 = 2 @ 10mm dia. on 60mm circle.
r ! Warning: Before use, read saw blade safety guidelines on pages 266-268. www.amanatool.com 253
™
B
5° 5°
12° HARDER
GRADE
ØD CARBIDE
C
8°
Used on panel saws with separate scoring units for chip-free cuts on both sides
of the material. With conical type scoring blades, the kerf width changes with
depth of penetration. Used in combination with our industrial saw blades ‘7’
series only (#714721, etc.). Also used in combination with the new DITEC™
Panel Sizing/Scoring
series panel saw main blades on pages 251 & 252. Kerf range should match
the main blade.
Machine ØD Teeth ‘B’ Kerf ‘C’ Plate
Style mm Count mm mm Bore *P.H. Tool No.
Giben 125 24 4.4 to 5.4 3.2 45mm —
125 24 4.8 to 5.8 3.2 45mm —
180 30 5.2 to 6.2 3.5 55mm —
300 48 4.4 to 5.4 3.2 50mm 3/15/80
Giben Prismatic 160 36 4.4 to 5.4 3.2 45mm 3/15/70
215 42 4.4 to 5.4 3.2 50mm 3/15/80
Holzma 175 28 4.4 to 5.4 3.2 45mm —
175 28 4.8 to 5.8 3.2 45mm —
180 30 4.4 to 5.4 3.2 45mm —
200 36 4.4 to 5.4 3.2 45mm —
200 36 4.8 to 5.8 3.5 45mm —
Martin 125 24 4.4 to 5.4 3.2 22mm —
Mayer 150 24 4.4 to 5.4 3.2 30mm —
Panhans 180 30 4.4 to 5.4 3.2 30mm —
200 36 4.4 to 5.4 3.2 30mm —
Schelling 150 24 4.4 to 5.4 3.2 20mm —
180 30 4.4 to 5.4 3.2 20mm —
200 36 4.4 to 5.4 3.2 20mm —
200 36 5.0 to 6.0 3.5 20mm —
300 48 4.4 to 5.4 3.2 30mm —
SCMI® 150 24 4.4 to 5.4 3.2 1-1/4" —
Selco 200 36 4.4 to 5.4 3.5 65mm 2/8/110 & 2/10/110
Various 125 24 4.4 to 5.4 2.8 20mm —
150 36 4.4 to 5.4 2.8 20mm —
160 36 4.4 to 5.4 3.5 55mm —
180 30 4.8 to 5.8 3.5 45mm —
200 36 5.8 to 6.6 3.5 45mm —
200 36 4.8 to 5.8 3.5 65mm —
Please specify if your application requires 22mm, 30mm, 45mm bore, etc. Due to many different scoring machine sizes (particularly arbor
sizes), it is advisable to measure both the scoring and main blades that are presently on your machine (diameter, bore, kerf, etc.).
BUSHINGS & STABILIZERS available, see page 261.
Industrial Quality • Carbide Tipped
Saw Blades
RE-BORING Services, see page 262.
* P.H. denotes pin-hole configuration, if applicable. Example: // = @ mm dia. on mm circle.
! Before use, read saw blade safety guidelines on pages 266-268.
prestige™ sUper FiNe DaDo sets
With Six 4-Wing Chippers
1/4" to 29/32" • ATB Grind
Packed In A Handy Black Molded Carrying Case INDUSTRIAL QUALITY
SUPER FINE DADO SET
Our Prestige™ Dado Set cuts perfectly smooth edges, flat-bottom cuts and H-ATB
GRIND
Tool No. 658060
-10° HOOK
grooves both along and across the grain that are free of splinters or rough
edges. This dado set is part of the renowned “Prestige™” line of superior
performance blades. MAX SLOT WIDTH
8" x 24T 29/32”
Like all of the blades in our Prestige™ lineup, this super- 5/8" BORE
MAX RPM 7000
smooth cutting Prestige™ dado set features the latest FOR SAFETY, USE MACHINE GUARDS
& WEAR EYE PROTECTION
in cutting tool technology including massive tool-steel
plates and precision ground D-10 carbide teeth. The 8"
diameter, 24-tooth outside plates are hollow ground for
proper clearance and feature ATB grind geometry with
every sixth tooth flat ground for efficient chip removal.
Each tooth body also features anti-kickback design to 2 Outside 8" x 24T Blades
help prevent overfeeding.
Set accommodates today’s undersized plywoods.
Each of the six interior chippers features four teeth and the standard width
capacity is 1/4" through 29/32." Adjustments can be easily made in 1/32"
increments and even finer adjustments, as small as .002," can be made by using
the supplied shim set. A 46-tooth dado set (see page 256) is also available for
use with plywood and melamine.
A stacking dado set is an ideal tool for cutting dadoes, grooves and tenons for
strong mortise-and-tenon joinery.
6 Carbide Tipped Four-Wing Chippers
Saw Blades
Industrial Quality • Carbide Tipped
Half Lap Tenons Dentil Groove & Rabbets
Set Includes Shim Set Set Accommodates
Corner Lap End Lap Box Joints Ship Lap for Fine Adjustments Undersized Plywood
ØD Hook Angle *Teeth Chippers Grind Kerf Range Bore Tool No.
8 -10° 24 1/8(x4), 3/32(x1), 1/16(x1) ATB 1/4 to 29/32 5/8 658060
8 -10° 24 1/8(x4), 3/32(x1), 1/16(x1) ATB 1/4 to 29/32 1 658060-1
* Teeth refers to the number of teeth for each outside saw blade.
Note: Always use the outside blades. Never attempt to use the chippers without the outside blades.
r
! Warning: Before use, read saw blade safety guidelines on pages 266-268. www.amanatool.com 255
Dado’s (cross-grain cuts) and grooves (cuts with the grain) are cut 46 Teeth
Only
efficiently on the table saw with a dado stack set. Unlike a “wobbler,” a
stack set produces a flat-bottom cut with chip-free edges. Amana Tool®
makes dado stack sets for every machine and every type of woodworking
material. The standard width capacity ranges from 1/8" to 13/16." 18, 24 &
Additional chippers may be purchased separately to expand the capacity 36 Teeth
beyond 13/16." The standard set, regardless of diameter or tooth count,
consists of two outside saw blades and four inside chippers. The outside
blades feature hollow-ground plates for proper clearance, and alternate
top bevel (ATB) grind with every sixth tooth flat ground (FT). See charts
below for additional components. For plywood and melamine, the sets
with 46-tooth outside blades are recommended.
Melamine Cabinet Plywood Soft/Hardwood
Single & Double Sided Rip/Crosscut Crosscut
46 Teeth 18, 24 &
Only 36 Teeth
ØD Hook Angle *Teeth Grind Kerf Range Bore Plastic Molded Case Tool No.
6 +15° 18 ATB/FT 1/4 to 13/16 5/8 Yes
8 – 5° 24 ATB/FT 1/4 to 13/16 5/8 Yes
8 – 5° 24 ATB/FT 1/4 to 13/16 1 Yes
8 +15° 24 ATB/FT 1/4 to 13/16 5/8 Yes
8 – 5° 46 ATB/FT 1/4 to 13/16 5/8 Yes †
8 – 5° 46 ATB/FT 1/4 to 13/16 1 Yes †
10 +15° 24 ATB/FT 1/4 to 13/16 5/8 No
10 +15° 24 ATB/FT 1/4 to 13/16 1 No
12 +15° 24 ATB/FT 1/4 to 13/16 1 No
† 8" x 46T set for super smooth cuts in cabinet grade plywoods and melamine.
‘Anti-Kickback’ design.
* Teeth refers to the number of teeth for each outside saw blade.
Max. Width Number of Chippers required
of Groove 1/16 1/8 1/4
13/16 1 2 1
1-1/16 1 2 2
1-9/16 1 2 4
2-1/16 1 2 6
3-1/16 1 2 10
4-1/16 1 2 14
Industrial Quality • Carbide Tipped
Saw Blades
Handheld reusable
plastic molded case
& shim set included
in all 6" & 8"
diameter dado sets
! Before use, read saw blade safety guidelines on pages 266-268.
DaDo shim sets
The perfect accessory for any dado set. Each set includes 14 color-coded plastic
shims in various thicknesses for precise adjustment of your dado set. Especially
useful when cutting plywood and other materials that are slightly under or
oversized.
Bore Tool No.
5/8 DSS-100 14 Piece Shim Set
1 DSS-101
30mm DSS-102
1-1/4 DSS-103
Each set includes the following:
Thickness
Quantity Shims Inch mm Color ØD
5 0.002 0.05mm Gold 60mm
1 0.005 0.15mm Violet/Orange 60mm
4 0.010 0.25mm Clear 60mm
4 0.020 0.50mm White 60mm
iNDiviDUal DaDo set CompoNeNts: 35° B 1/16 1/8 1/8 1/4 B 35°
DaDo Chippers
6" to 12"
L/H R/H
Flat Top (FT) Grind • Two Teeth Per Chipper
Amana Tool® has a full range of replacement parts for our dado sets, including
chippers and outside blades. This allows you to replace damaged cutters and to
expand the range of a standard set. These parts are manufactured to the same
C C C C C C
exacting standards as the full sets.
3/32" Kerf Available
Order Number Chipper Thickness:
ØD Bore ‘B’ 1/16 ‘B’ 1/8 ‘B’ 1/4 ‘B’ 3/32
6 5/8 651660 651860 651460 —
8 5/8 651680 651880 651480 651280
8 5/8 t651680-AK t651880-AK t651480-AK —
8 1 651680-1 651880-1 651480-1 —
10 5/8 651610 651810 651410 —
10 1 651610-1 651810-1 651410-1 —
12 1 651612 651812 651412 —
t 8" ‘Anti-Kickback’ chippers.
DaDo oUtsiDe BlaDes
6" to 12"
ATB Grind
Order No. Order No.
ØD Bore Teeth Kerf L/H R/H
6 5/8 18 .126 656010 656010-R
Saw Blades
Industrial Quality • Carbide Tipped
8 5/8 24 .126 658010 658010-R
8 5/8 24 .126 t 658010-AK t 658010-AK-R
8 1 24 .126 658010-1 658010-1-R
8 5/8 46 .126 658020 658020-R
8 1 46 .126 658020-1 658020-1-R
10 5/8 24 .126 651010 651010-R
10 1 24 .126 651010-1 651010-1-R
12 1 24 .126 651210 651210-R
t 8" ‘Anti-kickback’ outside blades.
Note: Specify left or right hand blades. Although each outside saw blade is sold
separately, it is recommended to buy one set of both blades so the O.D.
matches. See illustration at right for description.
r
! Warning: Before use, read saw blade safety guidelines on pages 266-268. www.amanatool.com 257
groovers
8" to 10"
Flat Top (FT) Grind • 12° Hook Angle
These blades are designed to cut 1/4" grooves in solid wood and plywood
on table saws and sliding table saws.
ØD ‘B’ Kerf ‘C’ Plate Max
Inches mm Teeth Inches mm Inches mm RPM Bore Tool No.
8 200 24 .250 6.35 .180 4.57 9,000 5/8 61365
10 250 24 .250 6.35 .180 4.57 7,600 5/8 61368
plate JoiNter
100mm Diameter
This plate jointer blade is designed with anti-kickback “fingers” that limit chip
thickness to provide a safer cut without loss of cutting speed or quality. The
blade fits most brands and models of plate jointers, including Lamello, Virutex,
Freud, Kaiser, Elu, and DeWalt and other makes of plate-jointer machines.
Packaged in a re-usable protective foam sleeve.
ØD Teeth Kerf Bore Tool No.
100mm 6 4mm 22mm LAM400T6
speCial ‘FaCe-Frame’ plate JoiNter
3-1/16"
Cut blind right-angle biscuit joints in stock as narrow as 1-3/4" with this smaller
diameter blade that fits most biscuit jointers, including Lamello, Virutex, Freud,
Kaiser, and DeWalt. A simple depth adjustment on your machine allows the use
Industrial Quality • Carbide Tipped
Saw Blades
of this blade.
ØD Description Teeth Kerf Bore Tool No.
3-1/16 Standard ‘Face-Frame’ 4 3mm 22mm LAM300T4 †
†LAM300T4 (22mm bore) will fit Lamello, Virutex, Freud, Kaiser, Elu, DeWalt and others.
258 r
! Warning: Before use, read saw blade safety guidelines on pages 266-268.
B
D
Combination
C Rip/Crosscut
This carbide-tipped trim-saw blade is the ideal upgrade (or replacement blade)
for Porter-Cable, Makita, and other brands of portable trim saws. The alternate
top bevel grind ensures high-quality crosscuts in solid wood and sizing cuts in
plywood.
ØD Teeth ‘B’ Kerf ‘C’ Plate Bore Tool No.
4-3/8 30 .072 .052 20mm**
5-1/2 30 .072 .052 5/8 ***
** RM-438 fits Porter-Cable and Makita portable trim saws.
Comes with adapter bushing for 3/8" arbor.
***RM-550 fits Makita 5-1/2" saw and others.
Comes with two adapter bushings, one for 5/8" arbor and one for 10mm arbor.
Replacement bushing for RM-438: #BU-120 (20mm x 3/8).
Replacement bushing for RM-550: #BU-110 (5/8 x 1/2), #BU-125 (5/8 x 10mm).
BUSHINGS & STABILIZERS available, see page 261.
B
D
C
Here is the mainstay cutter in the construction trades and home improvement Combination
realm. Get fast, clean, burn-free cuts in framing and pressure-treated stock and Rip/Crosscut
in plywood and other construction-grade sheet goods. Use in any brand or model
Saw Blades
Industrial Quality • Carbide Tipped
of circular saw.
ØD Teeth ‘B’ Kerf ‘C’ Plate Bore Tool No.
7-1/4 24 .120 .078 *5/8 Universal
* All blades marked with ‘*’ have a universal bore with 5/8" diameter arbor hole and
diamond knock-out. All other blades are as noted.
! Before use, read saw blade safety guidelines on pages 266-268. www.amanatool.com
B
D
C
For crosscutting and mitering with portable circular saws and small sliding Soft/Hardwood
Crosscut
compound miter saws, choose this blade. High tooth counts and alternate top
bevel grinds produce smooth, crisp cuts. Blade #250-60 is intended for use in
small SCM saws and has a 5° negative hook.
ØD Teeth ‘B’ Kerf ‘C’ Plate Bore Tool No.
6-1/2 40 .120 .078 *5/8 Universal
7-1/4 40 .120 .078 *5/8 Universal
8-1/2 60 .120 .083 5/8 only †
† 5° negative hook blade for Hitachi compound miter saw.
* All blades marked with ‘*’ have a universal bore with 5/8" diameter arbor hole and
diamond knock-out. All other blades are as noted.
B
D
C
Acrylic & Non-Melt Plastic
This blade produces quality cuts when sizing plywood & other sheet goods with
a portable circular saw. The blade can also be used for cutting plastics.
ØD Teeth ‘B’ Kerf ‘C’ Plate Bore Tool No.
7-1/4 40 .120 .078 *5/8 Universal
* All blades marked with ‘*’ have a universal bore with 5/8" diameter arbor hole and
diamond knock-out. All other blades are as noted.
B
Industrial Quality • Carbide Tipped
Saw Blades
D
C
This blade is designed especially for renovation and demolition work, where Demolition
Emergency
contact with nails, screws, and similar debris has to be expected. The blade is
configured – low tooth count and flat-top grind – for ripping. A negative hook
angle and strong shoulder design to help prevent the blade’s carbide tips of
breaking off upon impact against a hidden nail.
ØD Teeth ‘B’ Kerf ‘C’ Plate Bore Tool No.
7-1/4 14 .120 .078 5/8
! Before use, read saw blade safety guidelines on pages 266-268.
saw BlaDe Bore reDUCtioN BUshiNgs
ØD Ød A Tool No.
5/8 10mm .053 BU-125
5/8 1/2 .060 BU-110
3/4 5/8 .062 BU-150
20mm 3/8 .060 BU-120
22mm 3/4 .062 BU-130 A d
22mm 20mm .070 BU-140 D
1 5/8 .086 BU-100
1 7/8 .097 BU-225
1 7/8 .110 BU-250
1 3/4 .075 BU-200
1 20mm .097 BU-122
1-1/8 1 .086 BU-300
1-1/4 1 .086 BU-400
1-1/4 1-1/8 .075 BU-500
1-1/4 30mm .086 BU-450
30mm 5/8 .070 BU-515
30mm 3/4 .070 BU-520
30mm 25mm .070 BU-530
30mm 1 .070 BU-525
Note: Most saw blade bushings have serrations on the outside diameter edge to
provide a better grip & fit.
saw BlaDe staBilizer / stiFFeNer
The purpose of blade stabilizers is to increase the overall stiffness of the saw
blade, thus reducing vibration. Reduction in vibration improves cut quality and
dampens noise. Stabilizers are particularly beneficial when used with thin-kerf
blades. Amana Tool® stabilizers are made from the steel used for our Industrial
Series saw blades. The steel is ground (not stamped), and it is extremely flat on
both sides to reduce run-out and vibration. Please note that depth of cut will be
reduced slightly and interference between the stabilizers and the table insert
may occur. You may use one or two stabilizers, depending on the application and Saw Blade
arbor length. Body
Each order number consists of one pair.
Inside Outside
Use With Saw Blade Stabilizer Stabilizer
ØD Ød B Diameter(s) Tool No.
Inside Outside
4 5/8 .098 (x2) 8 to 12 STF-4
Collar Collar
Threads
Arbor
Lock Nut
Saw Blades
Industrial Quality • Carbide Tipped
A d
D
r
! Warning: Before use, read saw blade safety guidelines on pages 266-268. www.amanatool.com 261
Re-BoRing SeRvice
Most Amana Tool® saw blades, scoring saws and dado sets can be re-bored
to fit special size arbors.
Example: If you needed a 12" x 40 tooth TCG blade (#612401) re-bored to 30mm
(Bore-2), order as follows:
Quantity Description Item No.
1 Each 12" x 40T TCG 612401
1 Each Re-Bore Above #612401 To 30mm Bore-2
Note: For special boring requests (pin-holes, keyways, etc.) please see next page for
a detailed drawing to show bore specifications and arrangement.
Example:
Blade: #612401
Main Bore: 30mm diameter
Pin-holes (2): 10mm diameter each
Pin-hole location: 30mm from center of main bore to center of each
pin-hole (60mm circle).
Delivery: Please allow 7-10 working days to process your order.
Guarantee: Blades carry the same Amana Tool® quality guarantee. However, blades
are not returnable once re-bored except for defects in material or workmanship.
Bore Range Item No.
3/4" to 1-3/8" Bore
1-1/2" to 3-1/2" Bore-1
Bore-2
Saw Blades Technical Information
20mm to 35mm
36mm to 75mm Bore-3
Bore Keyway
Bore Pin-Hole
3/4" to 30mm Bore - Dado
Larger sizes available on request.
Important Note:
Due to the many different size scoring saw arbors on the market, please order
carefully. For example: If you were to assume that the arbor hole needed was
1-3/16" (1.187") and it was actually 30mm (1.181"), the difference of only
.006" (6/1000th of one inch) is enough that the blade would not fit onto the
arbor properly. (1-3/16" is too large to fit on 30mm arbors and will have excessive
vibration and run-out and will not run concentrically.) Conversely, if the arbor hole is
too small, you could do damage to the arbor, blade and tensioning if you attempt to
force the blade onto the arbor.
Industrial Quality • Carbide Tipped
262
DiagRam FoR Re-BoRing oF Saw BlaDeS
Amana Tool ® Saw Blade Part # __________________________
A - Bore Diameter __________________________________
B - Pin-Hole Diameter ______________________________
Number Of Pinholes ______________________________
C - Bolt Circle Diameter ______________________________
(Pin-hole Center To Pin-hole Center)
Saw Blades Technical Information
Industrial Quality • Carbide Tipped
B A
D
Number Of Keyways __________________________________
D = Depth = ________________________________________
W
W = Width = ________________________________________
www.amanatool.com 263
Used on saw blades for cutting soft and hardwood along the grain (ripping).
Alternate right top bevel and left top bevel. Used on saw blades for general
purpose and crosscutting natural wood & veneered plywood.
Higher top bevel grind and longer tooth than our standard alternate top bevel. Used
on ‘MB’ and ‘MSB’ Series blades and are specifically designed for cutting
melamine chip-free on table saws without the aid of scoring units.
Groups of four alternate top bevel and one flat ground tooth, divided by large
gullets in the saw plate. Used on combination blades for general purpose wood
Saw Blades Technical Information
applications.
Alternate flat raker tooth and higher trapeze tooth divides the chips to achieve
cuts in hard materials, MDF, OSB and plastics. Also used on blades for cutting
non-ferrous materials.
For use in miter saws in picture frame shops, window and door manufacturers or
anywhere that miter machines are used.
Produces burr-free cuts in non-ferrous materials as well as splinter-free cuts in
wood and wood-based products.
Used on conical tooth scoring blades.
Industrial Quality • Carbide Tipped
Hollow face grind is used for cutting melamine and other difficult to machine
materials. Generally used on vertical panel saws (Striebig, etc.).
geneRal inFoRmaTion
2. TooTh angleS
Hook (Rake) Angle 6° to 22°
Soft materials or rip blades require an angle of about 18° to 22,° hard materials
about 6.° Saw blades for cutting aluminum and melamine have a negative hook
angle.
Top Clearance Angle 12° to 15°
This angle changes according to the hardness of material; 12° for hard and 15°
for softer materials.
1. Top Bevel Angle 8° to 12°
Normally 10,° enabling gradual penetration into material.
2. Radial Side angle 1° to 2°
Allows clearance along the sides of the tooth.
1. 2.
Saw Blades Technical Information
3. geneRal
Industrial Quality • Carbide Tipped
B B B
Kerf (‘B’)
Refers to the largest width of the saw tooth and is represented in decimals and/or
millimeters.
Plate (‘C’)
Refers to the thickness of the steel saw body, on to which the carbide teeth are
brazed. This dimension is represented in decimals and/or millimeters.
Note: Most industrial series saw plates are laser cut. C C C
Expansion Slots
Allows the saw body to expand and contract under load and heat and to prevent
twisting or warpage.
Copper Plugs Expansion Slots
Reduces the turbulent noise created by the saw blade while it is being operated. Copper Plugs
Bore, Pin-Holes, Keyways
Refers to the diameter of the arbor hole, pin-holes, keyways, etc. and is
represented in fractions or millimeters.
Note: P.H. denotes pin-hole configuration, if applicable.
Example: 2/10/60 = 2 @ 10mm dia. on 60mm circle.
Note: A special re-boring service and bushings are available for non-standard sizes.
Please see page 263.
www.amanatool.com 265
Saw Blades Technical Information
Always refer
Al f tto your power ttooll owner’s
’ manual.l
Al
Always wear eye andd ear protection
power tools.
t ti dduring
i operation
ti off
Di
Disconnectt th
the power ttooll ffrom th
changing the saw blade.
the power source bbefore
f
Never cut stock freehand. Always use the fence or miter
gauge to support the workpiece.
Industrial Quality • Carbide Tipped
KKeep your hhands
d outt off path
th off th
the saw bl
blade.
d
Al
Always ffeedd th
tool rotation.
the stock
t k against
i t th
the di
direction
ti off th
the power
For up to date Safety Guidelines in English, French and Spanish visit
For
o Sa
Saw Blades
ades
D nott use a bl
Do blade
d ththatt iis cracked
k d or bbroken,
k hhas a chipped
or missing tooth, or has been dropped or damaged.
hi d
Wh mounting
When ti th
the saw blblade,
d saw tteeth
direction of power tool rotation.
th mustt fface th
the
Saw Blades Technical Information
Industrial Quality • Carbide Tipped
M k certain
Make
the saw.
t i th
thatt th
the arbor
b nutt iis secure bbefore
f starting
t ti
NNever
exceedd maximum
i RPM off th
the saw bl
blade.
d
Each blade may differ, please see blade stencil.
Do not attempt to cut screws, nails, staples, concrete or
other foreign materials. Use saw blade only for which it NNever
make
spinning.
k adjustments
dj t t tto th
the saw while
hil th
the bl
blade
d iis
was intended.
UUse a splitter
litt or riving
i i kknife
if tto preventt ki
kickback.
kb k
BBefore
f starting
t ti th the saw, adjust
dj t th
height 1/8" above the workpiece.
the saw bl
blade
d
For up to date Safety Guidelines in English, French and Spanish visit
www.amanatool.com
For Saw Blades
AlAlways use ththe guardd ththatt came withith ththe saw.
UUse
a pushh stick
ti k tto di
distance
t
when ripping narrow stock.
your hhands
d ffrom th
the bl
blade
d
Saw Blades Technical Information
AllAllow saw tto reachh maximum
i RPM bbefore
f starting
t ti th the cut.
t
MMake
k certain
the saw.
t i th
the workpiece
k i iis supported
t d bbefore
f starting
t ti
(A)
(B)
NNever
use ffence(A)
(A) andd th
the guide(B)
id (B) att th
the same titime. D
not force the blade into the cut. Use a feed rate that does
Do
UUse roller
ll stands
t d tto supportt th
the llarge workpiece.
k i
not bog down the saw.
Industrial Quality • Carbide Tipped
HHave
your saw bl
inspected.
blade
d professionally
f i ll sharpened
h d andd
KKeep ththe saw blbladed sharp
h andd clean.
l
For up to date Safety Guidelines in English, French and Spanish visit
Over 250 different cutters for all your shaping needs. Extra-thick carbide tips
offer many resharpenings and longer tool life. RPM rating: 12,000 and under.
Cutters are furnished with either 1/2," 3/4" or 1-1/4" bore.
Cutters with 3/4" bore include 2 reduction bushings (1/2" x 3/4")
which will reduce the bore to 1/2."
Cutters with 1-1/4" bore include 2 reduction bushings (1" x 1-1/4")
which will reduce the bore to 1."
d
1:1
D 1:1
ØD B Ød Tool No.
1-7/8 1/4 1/2 & 3/4
2 1/4 1/2
2-1/2 1/4 1 & 1-1/4
2-5/8 1/4 1/2 & 3/4 †
2-3/4 1/4 1/2 & 3/4
2-7/8 1/4 1/2 & 3/4
2-7/8 1/4 1 & 1-1/4
3-1/8 1/4 1/2 & 3/4 ††
3-3/8 1/4 1 & 1-1/4
3-9/16 1/4 1 & 1-1/4
2-5/8 3/8 1/2 & 3/4 †
2 1/2 1/2
2-1/2 1/2 1/2 & 3/4
2-5/8 1/2 1/2 & 3/4
2-5/8 3/4 1/2 & 3/4
2 1 1/2
2-5/8 1 1/2 & 3/4
2-5/8 1-1/2 1/2 & 3/4
2-5/8 2 1/2 & 3/4
† Due to size, furnished with only one 1/2" x 3/4" bushing.
††Cabinet set replacement cutter, no bushing is furnished.
d
Shaper Cutters
Industrial Quality • Carbide Tipped • 3-Wing
1:1 A-27-104
1:1 A-27-106
D
ØD B Ød Tool No.
4 1/4 1-1/4
4 3/8 1-1/4
4 1/2 1-1/4
4 3/4 1-1/4
4 1 1-1/4
4 1-1/4 1-1/4
4 1-3/4 1-1/4
4 2 1-1/4
For rub collars & bushings. See pages 332–333.
3D renderings & tool illustrations shown at actual size.
Wood profiles shown at actual size. Visit our website for additional 1:1 profiles.
PRESTIGE™ MIGhTy aDjuSTablE SuPER-FInE DaDo/GRoovER SET
For Shapers • Accommodates Undersized Plywood
4 Wing • ATB & FT Grind • 1/4" to 1" Grooving
Our Prestige Dado Set cuts perfectly smooth edges, flat-bottom cuts and grooves both along and across the grain that
™
are free of splinters or rough edges. This set consists of seven cutters made of a hard wearing steel tool body complete with
four tungsten carbide tips. Ideal for producing different dado cuts, slots and rabbeting in softwood, hardwood and man-made
Profiling
boards on a shaper machine. Width can be adjusted as required using included shim set.
ØD Hook Angle Teeth ATB Angle Grind Kerf Range Ød Groovers RPM Tool No.
4 -10° 4 15° ATB 1/4 to 1 3/4 1/16, (2)1/8, 3/16, 1/4 6,100-10,500 61370 *
* Includes shim set #67254. Jointing
15°
7-Piece Set #61370 Includes:
1/8"
1/16"
1/8" Door
1/8" Making
3/16"
d B 1/4"
1/8"
Shim Set
1/4" to 1"
GRoovERS Max t
4 Wing • FT Grind
ØD Hook Angle B Teeth Ød Max t RPM Tool No.
4 15° 1/16 4 3/4 1-1/4 6,100-10,500 61372
4 15° 1/8 4 3/4 1-1/4 6,100-10,500 61374
4 15° 3/16 4 3/4 1-1/4 6,100-10,500 61376
4 15° 1/4 4 3/4 1-1/4 6,100-10,500 61378
PRESTIGE™ MIGhTy DaDo ShIM SET
A stacking dado set is an ideal tool for
cutting dadoes, grooves and tenons
The perfect accessory for the above dado/groover set. Each set includes 19 shims for strong mortise-and-tenon joinery.
in various thicknesses for precise adjustments of your dado/groover set width.
Especially useful when working with plywood and other materials that are slightly
under or oversized.
Each Shim Set #67254 includes the following:
Thickness
Quantity Shims Color Inch mm Ød ØD Half Lap Tenons
Shaper Cutters
Industrial Quality • Carbide Tipped
5 Silver 0.002 0.05 3/4 2-1/4
6 Clear 0.010 0.25 3/4 2-1/4
8 White 0.020 0.50 3/4 2-1/4
Each Prestige™ Mighty Adjustable Dado/Groover Set Includes:
Instruction Manual Dentil Groove & Rabbets
With Dado Configurations Including Set-Ups for
Undersized Plywood
Perfect for Crosscutting and Ripping These Materials:
Corner Lap End Lap
Melamine/Laminate Veneered Plywood Hardwood
For rub collars & bushings. See pages 332–333. Box Joints Ship Lap
3D renderings & tool illustrations not shown at actual size. www.amanatool.com 271
CoRnER RoUnD
d
Grooving R
Profiling B
R1
1:1
Jointing
D1
D
ØD ØD1 B R R1 Ød Rub Collar Tool No.
2-5/8 1-5/8 15/16 1/4 1/2 1/2 & 3/4 C-005** C-011** 905
Door 3-5/32 2-5/32 15/16 1/4 1/2 1 & 1-1/4 C-051*** SC680
Making
CovE & CoRnER RoUnD
R d
B
B1
T1
R1
1:1 950
D1
D
ØD ØD1 B B1 T T1 R R1 Ød Rub Collar Tool No.
2-5/8 2 15/16 1/8 1/2 5/16 1/2 5/16 1/2 & 3/4 C-005** 950
2-3/4 1-3/4 1-3/8 3/8 1/2 1/2 1/2 1/2 1/2 & 3/4 C-006** SC410
3 1-3/4 1-9/16 5/16 5/8 5/8 5/8 5/8 1/2 & 3/4 C-006** SC412
3-1/4 1-3/4 1-7/8 3/8 3/4 3/4 3/4 3/4 1/2 & 3/4 C-006** SC414
3-3/4 1-3/4 2-1/4 1/4 1 1 1 1 1/2 & 3/4 C-006** SC416
FlUTE & CovE
d
R
Shaper Cutters
Industrial Quality • Carbide Tipped • 3-Wing
1:1
B1
ØD B B1 R Ød Tool No.
2 1 1/4 1/2 1/2 SC600
For rub collars & bushings. See pages 332–333.
*Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only!
3D renderings & tool illustrations not shown at actual size.
272 Wood profiles shown at actual size. Visit our website for additional 1:1 profiles.
5/16" CovE & 3/8" BEAD
d Grooving
R
B Profiling
R1
1:1 Jointing
ØD B R R1 Ød Rub Collar Tool No.
2-5/8 1 3/8 5/16 1/2 & 3/4 C-010** 951
Door
Replacement ‘T’ bushing(s) #BU-550. Making
1/8" To 3/8" CoRnER RoUnD & 1/4" BEAD
d
B
R1
R1
1:1
D1
D
ØD ØD1 B R R1 Ød Rub Collar Tool No.
2 1-1/4 1 3/8 1/8 1/2 C-002* SC602
2-5/8 1-7/8 15/16 3/8 1/8 1/2 & 3/4 C-008** 952
DRoP lEAF CovE
d
Shaper Cutters
Industrial Quality • Carbide Tipped • 3-Wing
R
1:1
ØD B R Ød Rub Collar Tool No.
2-5/8 1 3/8 1/2 & 3/4 C-008** SC634
For rub collars & bushings. See pages 332–333.
*Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only!
3D renderings & tool illustrations not shown at actual size.
Wood profiles shown at actual size. Visit our website for additional 1:1 profiles. www.amanatool.com 273
CoRnER RoUnD d
Grooving
R
Profiling
1:1
Jointing D1
D
Description ØD ØD1 B R Ød Rub Collar Tool No.
Corner Round 3-5/8 2-1/8 1 3/4 1/2 & 3/4 C-011** 959
Drop Leaf-Bead 2-5/8 1-5/8 1 1/2 1/2 & 3/4 C-005** SC636
Replacement ‘T’ bushing(s) #BU-550.
Door
Making
HEAvy-DUTy CoRnER RoUnD
A-30-118
d
A-30-114
R A-30-112
B A-30-110
A-30-108
A-30-106
A-30-104
A-30-102
D1 A-30-100
D
1:1
Counter-clockwise rotation: Wood face-down
ØD ØD1 R B Ød Rub Collar Tool No.
4 3-3/4 1/8 3/8 1-1/4 C-038 A-30-100
4 3-5/8 3/16 7/16 1-1/4 C-037 A-30-102
4 3-1/2 1/4 1/2 1-1/4 C-035 A-30-104
4 3-3/8 5/16 9/16 1-1/4 C-034 A-30-106
4 3-1/4 3/8 5/8 1-1/4 C-033 A-30-108
4 3 1/2 3/4 1-1/4 C-032 A-30-110
4 2-3/4 5/8 7/8 1-1/4 C-031 A-30-112
4 2-1/2 3/4 1 1-1/4 C-017 A-30-114
4-1/2 2-1/2 1 1-1/4 1-1/4 C-017 A-30-116
4-1/2 2-1/2 1-1/4 1-1/2 1-1/4 C-017 A-30-118
STAIR TREAD noSE
d
Shaper Cutters
Industrial Quality • Carbide Tipped • 3-Wing
B B1 R
1:1
D1
D
ØD ØD1 B B1 R Ød Rub Collar Tool No.
3-3/8 1-7/8 1-1/2 1-1/8 9/16 1/2 & 3/4 C-008** 932
For rub collars & bushings. See pages 332–333.
*Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only!
3D renderings & tool illustrations not shown at actual size.
274 Wood profiles shown at actual size. Visit our website for additional 1:1 profiles.
BUll noSE
d Grooving
B B1 R Profiling
973 974 925 927 929
1:1
Jointing
D1
D
Description ØD ØD1 B B1 R Ød Rub Collar Tool No.
1/4 Bead 2-5/8 2-3/8 9/16 1/4 1/8 1/2 & 3/4 C-015** 973 † Door
Making
3/8 Bead 2-5/8 2-1/4 5/8 3/8 3/16 1/2 & 3/4 C-025** 974
1/2 Bead 2-5/8 2-1/8 13/16 1/2 1/4 1/2 & 3/4 C-011** 925
5/8 Bead 2-5/8 2 15/16 5/8 5/16 1/2 & 3/4 C-010** 923
3/4 Bead 2-5/8 1-7/8 1-1/16 3/4 3/8 1/2 & 3/4 C-008** 927
1 Bead 2-5/8 1-5/8 1-1/2 1 1/2 1/2 & 3/4 C-005** 929
1-1/4 Bead 3-9/16 2-5/16 1-5/8 1-1/4 5/8 1 & 1-1/4 C-040*** SC570
1-1/2 Bead 3-13/16 2-5/16 2 1-1/2 3/4 1 & 1-1/4 C-040*** SC572
2 Bead 4-5/16 2-5/16 2-1/2 2 1 1 & 1-1/4 C-040*** SC574
† Due to size, furnished with only one 1/2" x 3/4" bushing.
HEAvy-DUTy BEAD (BUll noSE)
d
B B1 A-29-100 A-29-102 A-29-104 A-29-108
R 1:1
D1
D
Shaper Cutters
Industrial Quality • Carbide Tipped • 3-Wing
ØD ØD1 R B B1 Ød Rub Collar Tool No.
4 3-3/4 1/8 1/2 1/4 1-1/4 C-038 A-29-100
4 3-5/8 3/16 5/8 3/8 1-1/4 C-037 A-29-102
4 3-1/2 1/4 13/16 1/2 1-1/4 C-035 A-29-104
4 3-1/4 3/8 1-1/8 3/4 1-1/4 C-033 A-29-106
4 3 1/2 1-5/16 1 1-1/4 C-032 A-29-108
For rub collars & bushings. See pages 332–333.
*Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only!
3D renderings & tool illustrations not shown at actual size.
Wood profiles shown at actual size. Visit our website for additional 1:1 profiles. www.amanatool.com 275
FlUTE (ConvEX)
Grooving d
B R 972 926 928 930
Profiling
1:1
Jointing D
Description ØD B R Ød Rub Collar Tool No.
1/4 Flute 2-5/8 1/4 1/8 1/2 & 3/4 C-015** 971 †
3/8 Flute 2-5/8 3/8 3/16 1/2 & 3/4 C-025** 972 †
1/2 Flute 2-5/8 1/2 1/4 1/2 & 3/4 C-011** 926
Door 3/4 Flute 2-5/8 3/4 3/8 1/2 & 3/4 C-008** 928
Making 1 Flute 2-5/8 1 1/2 1/2 & 3/4 C-005** 930
1-1/4 Flute 3-1/4 1-1/4 5/8 1 & 1-1/4 C-050*** SC532
1-1/2 Flute 3-1/2 1-1/2 3/4 1 & 1-1/4 C-050*** SC534
2 Flute 4 2 1 1 & 1-1/4 C-050*** SC536
† Due to size, furnished with only one 1/2" x 3/4" bushing.
HEAvy-DUTy FlUTE (ConvEX)
d
B A-28-100 A-28-104 A-28-106 A-28-108
R 1:1
ØD R B Ød Rub Collar Tool No.
4 1/8 1/4 1-1/4 C-038 A-28-100
4 1/4 1/2 1-1/4 C-035 A-28-104
4 3/8 3/4 1-1/4 C-033 A-28-106
4 1/2 1 1-1/4 C-032 A-28-108
CoRnER TRIPlE BEAD
Shaper Cutters
Industrial Quality • Carbide Tipped • 3-Wing
C d
B
R
1:1
D1
D
ØD ØD1 B C R Ød Rub Collar Tool No.
2-5/8 1-1/2 7/8 9/16 3/16 1/2 & 3/4 C-043** SC624
For rub collars & bushings. See pages 332–333.
*Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only!
3D renderings & tool illustrations not shown at actual size.
276 Wood profiles shown at actual size. Visit our website for additional 1:1 profiles.
MATCHED/REvERSIBlE DETAIl BEAD & CovE
C d Grooving
Profiling
R
1:1 Jointing
D1
D
ØD ØD1 B C R Ød Rub Collar Tool No.
3 1-3/4 15/16 5/8 1/4 1/2 & 3/4 C-006** SC646
Door
Making
MATCHED/REvERSIBlE CoRnER BEAD
C d
B
R
1:1
D1
D
ØD ØD1 B C R Ød Rub Collar Tool No.
3-3/8 1-7/8 15/16 3/4 1/2 1/2 & 3/4 C-008** SC648
MATCHED/REvERSIBlE oGEE
d
Shaper Cutters
B Industrial Quality • Carbide Tipped • 3-Wing
B1 R
1:1 906
ØD B B1 R Ød Rub Collar Tool No.
2-5/8 3/4 1/2 1/4 1/2 & 3/4 C-005** 906
3-1/8 3/4 1/2 1/4 1 & 1-1/4 C-051** SC682
For rub collars & bushings. See pages 332–333.
*Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only!
3D renderings & tool illustrations not shown at actual size.
Wood profiles shown at actual size. Visit our website for additional 1:1 profiles. www.amanatool.com 277
WAvE EDGE
Grooving C d
Profiling
B
R
R1
Jointing R2
1:1
D1
D
ØD ØD1 B C R R1 R2 Ød Rub Collar Tool No.
2-3/4 1-5/8 1 9/16 3/16 1/4 1/8 1/2 & 3/4 C-005** SC626
Door
Making
RoUnDED FlUTE
d
B R1
R
1:1
D1
D
ØD ØD1 B R R1 Ød Rub Collar Tool No.
2-5/8 2-5/16 1 3/32 7/32 1/2 & 3/4 C-013** SC628
oGEE & BEAD TABlE EDGE
d
Shaper Cutters
Industrial Quality • Carbide Tipped • 3-Wing
R R1
B
B1
1:1
D1
D
ØD ØD1 B B1 R R1 Ød Rub Collar Tool No.
3-1/4 2-1/8 1 3/4 1/2 1/8 1/2 & 3/4 C-007** 958
For rub collars & bushings. See pages 332–333.
*Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only!
3D renderings & tool illustrations not shown at actual size.
278 Wood profiles shown at actual size. Visit our website for additional 1:1 profiles.
CRoWn MolDInG
Grooving
d
a° Profiling
SC666
R1
962
a° 1:1
SC664 Jointing
B B1
SC662
R
SC660
Door
a° Making
ØD B B1 a° R R1 Ød Rub Collar Tool No.
2-3/4 2-1/4 2 45° 1/2 3/16 1/2 & 3/4 C-027** 962
3-1/2 2 1-3/4 45° 11/32 1/4 1 C-049*** SC666
3-1/2 2-1/2 2-1/4 45° 13/32 11/32 1 & 1-1/4 — SC664
3-1/2 3 2-3/4 45° 17/32 11/32 1 & 1-1/4 — SC662
3-1/2 3-1/2 3-1/4 45° 9/16 1/2 1 & 1-1/4 — SC660
BASE MolDInG 57/64"
3 Wing
3-1/4"
B
Shaper Cutters
Industrial Quality • Carbide Tipped • 3-Wing
R1
R2
L
D1
D
1:1
ØD ØD1 B R R1 R2 L Ød Rub Collar Tool No.
4-9/64 2-23/64 3-5/16 29/64 3/16 7/32 7/8 1 & 1-1/4 C-040*** SC668
For rub collars & bushings. See pages 332–333.
*Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only!
3D renderings & tool illustrations not shown at actual size.
Wood profiles shown at actual size. Visit our website for additional 1:1 profiles. www.amanatool.com 279
MUlTI-FoRM
d
Grooving R2
R1
Profiling
B
R1
R
Jointing
D1 1:1
D
Door
Making
ØD ØD1 B R R1 R2 Ød Rub Collar Tool No.
3-1/2 2-7/8 1-7/8 1/4 5/16 3/8 1/2 & 3/4 C-007** 965
MolDInG
d
R2
R1
B
R1
1:1
D
ØD B R R1 R2 Ød Rub Collar Tool No.
3 1-3/4 1/8 5/32 1/4 1/2 & 3/4 C-010** 966
MolDInG
C d
Shaper Cutters
Industrial Quality • Carbide Tipped • 3-Wing
R1
B
R
1:1
D1
D
ØD ØD1 B C R R1 Ød Rub Collar Tool No.
2-5/8 1-3/4 15/16 7/16 1/4 3/16 1/2 & 3/4 C-006** SC630
For rub collars & bushings. See pages 332–333.
*Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only!
3D renderings & tool illustrations not shown at actual size.
280 Wood profiles shown at actual size. Visit our website for additional 1:1 profiles.
CRoWn MolDInG
d
Grooving
Profiling
B R
Jointing
a°
Door
1:1 Making
D
ØD B a° R Ød Rub Collar Tool No.
3-1/4 2-1/4 45° 1-1/4 1/2 & 3/4 C-030** 967
Replacement ‘T’ bushing(s) #BU-550.
WInDoW SASH
With Ball Bearing Rub Collar
d
B3
B B1 R
B2
B1 For this profile, use bottom cutter
and rub collar only.
1:1
D
ØD B B1 B2 B3 R Ød Rub Collar Tool No.
2 1-5/8 5/16 3/8 5/8 1/4 1/2 & 3/4 C-043** 939
SASH d R
B
Shaper Cutters
Industrial Quality • Carbide Tipped • 3-Wing
B
R
Tool #976
Tool #975
D1 D
1:1 975 976
Description ØD ØD1 B R Ød Rub Collar Tool No.
Female Sash 2-5/8 2-1/8 5/8 1/8 1/2 & 3/4 C-024** 975
Male Sash 2-5/8 2-1/8 5/8 1/8 1/2 & 3/4 C-024** 976
For rub collars & bushings. See pages 332–333.
*Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only!
3D renderings & tool illustrations not shown at actual size.
Wood profiles shown at actual size. Visit our website for additional 1:1 profiles. www.amanatool.com 281
joInERy
Wedge Tongue & Groove
Grooving
d
Profiling
B B1
Jointing
1:1
D1
D
Door
Making ØD ØD1 B B1 Ød Rub Collar Tool No.
2-5/8 2 15/16 11/32 1/2 & 3/4 C-010** 903
B B1
1:1
D1
D
ØD ØD1 B B1 Ød Rub Collar Tool No.
2-5/8 2 15/16 11/32 1/2 & 3/4 C-010** 904
Replacement ‘T’ bushing(s) #BU-550.
GlUE joInT
d
Shaper Cutters
Industrial Quality • Carbide Tipped • 3-Wing
B B1
1:1 SC617
D1
D
ØD ØD1 B B1 Ød Rub Collar Tool No.
2-5/8 2-1/4 1-3/16 3/8 1/2 & 3/4 C-026** 911
2-13/16 2-1/2 1-3/16 3/8 1 & 1-1/4 C-017** SC617
For rub collars & bushings. See pages 332–333.
*Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only!
3D renderings & tool illustrations not shown at actual size.
282 Wood profiles shown at actual size. Visit our website for additional 1:1 profiles.
loCK MITER
Grooving
d
Profiling
B B1
Jointing
a°
D1
Door
D Making
1:1
ØD ØD1 B B1 a° Ød Rub Collar Tool No.
3-3/4 2 1 3/8 45° 1/2 & 3/4 C-006** 998
4-17/32 2-31/64 1 3/8 45° 1 & 1-1/4 C-017*** SC619
Replacement ‘T’ bushing(s) #BU-550.
FInGER joInT
d
B1
L 1:1 999
D1
D
ØD ØD1 B B1 L Ød Rub Collar Tool No.
2-7/8 2-1/8 1-1/2 11/32 3/8 1/2 & 3/4 C-011** 999
3 2-1/4 1-1/2 13/64 3/8 1 & 1-1/4 — SC300
GlUE joInT
Shaper Cutters
Industrial Quality • Carbide Tipped • 3-Wing
d
B B1
1:1
D1
D
ØD ØD1 B B1 Ød Rub Collar Tool No.
2-5/8 2-3/8 3/4 11/32 1/2 & 3/4 C-014** 933
For rub collars & bushings. See pages 332–333.
*Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only!
3D renderings & tool illustrations not shown at actual size.
Wood profiles shown at actual size. Visit our website for additional 1:1 profiles. www.amanatool.com 283
DOOR LIP
Corner Round & Rabbet
Grooving (counter-clockwise, rabbet up)
a° d
Profiling
B1
B
R
Jointing
1:1
D1
D
Door
Making
ØD ØD1 B B1 R a° Ød Rub Collar Tool No.
2-5/8 1-3/4 1-3/16 5/8 3/8 10° 1/2 & 3/4 C-006** 900
Corner Round & Taper Rabbet
(counter-clockwise, rabbet down)
R
B
B1
a°
1:1
D1
D
ØD ØD1 B B1 R a° Ød Rub Collar Tool No.
2-5/8 1-3/4 1-1/4 11/16 3/8 10° 1/2 & 3/4 C-006** 901
Replacement ‘T’ bushing(s) #BU-550.
Shaper Cutters
Industrial Quality • Carbide Tipped • 3-Wing
For rub collars & bushings. See pages 332–333.
*Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only!
3D renderings & tool illustrations not shown at actual size.
284 Wood profiles shown at actual size. Visit our website for additional 1:1 profiles.
DOOR LIP
Corner Round & Taper Rabbet
(counter-clockwise, rabbet down) Grooving
Profiling
R
B
B1 Jointing
1:1
a°
D1
D
Door
Making
ØD ØD1 B B1 R a° Ød Rub Collar Tool No.
2-5/8 2 1 7/16 1/8 10° 1/2 & 3/4 C-006** 991
Corner Round & Ogee
B
B1
1:1
D1
D
ØD ØD1 B B1 Ød Rub Collar Tool No.
2-5/8 2-1/4 1 13/16 1/2 & 3/4 C-023** 992
Ogee & Cove
d
Shaper Cutters
B
Industrial Quality • Carbide Tipped • 3-Wing
1:1
D1
D
ØD ØD1 B Ød Rub Collar Tool No.
2-5/8 1-1/2 1 1/2 & 3/4 47806** 993
For rub collars & bushings. See pages 332–333.
*Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only!
3D renderings & tool illustrations not shown at actual size.
Wood profiles shown at actual size. Visit our website for additional 1:1 profiles. www.amanatool.com 285
DOOR LIP
Ogee & Cove
Grooving
d
Profiling
B1 R
B R1
Jointing
C 1:1
D1
D
ØD ØD1 B B1 C R R1 Ød Rub Collar Tool No.
4-5/16 3-1/8 1-1/32 9/32 3/8 1/4 1/8 1 & 1-1/4 C-049*** SC462
Door
Making
Ogee & Cove
B1 R
B R
C 1:1
D1
D
ØD ØD1 B B1 C R Ød Tool No.
4-5/16 3-1/8 1-1/32 3/8 13/32 1/8 1 & 1-1/4 SC464
90° ‘V’ GROOVE
d
Shaper Cutters
a°
Industrial Quality • Carbide Tipped • 3-Wing
1:1
ØD B a° Ød Rub Collar Tool No.
2-5/8 15/16 45° 1/2 & 3/4 47810** 957
For rub collars & bushings. See pages 332–333.
*Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only!
3D renderings & tool illustrations not shown at actual size.
286 Wood profiles shown at actual size. Visit our website for additional 1:1 profiles.
BEVEL
90° Double Bevel
Grooving
d
Profiling
a°
B
Jointing
1:1
C
D1 Door
Making
D
ØD ØD1 B a° C Ød Rub Collar Tool No.
2-5/8 1-11/16 1-3/16 45° 1/2 1/2 & 3/4 C-005** SC638
BEVEL
d
a°
B
1:1 977
SC618
D1 SC621
D
Description ØD ØD1 B a° Ød Rub Collar Tool No.
30° Bevel 2-5/8 1-3/8 1 30° 1/2 & 3/4 C-044** 977
45° Bevel 3-1/2 1-1/2 1 45° 1/2 & 3/4 C-011** SC618
45° Bevel 4 2 1 45° 1 & 1-1/4 C-050*** SC621
CLassICaL
d
Shaper Cutters
Industrial Quality • Carbide Tipped • 3-Wing
B B1 R
1:1
D1
D
ØD ØD1 B B1 R Ød Rub Collar Tool No.
2-5/8 2 1 3/8 3/16 1/2 & 3/4 C-004** 964
For rub collars & bushings. See pages 332–333.
*Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only!
3D renderings & tool illustrations not shown at actual size.
Wood profiles shown at actual size. Visit our website for additional 1:1 profiles. www.amanatool.com 287
REVERsIBLE/matChED COVE & BEaD
Grooving d
Profiling B B1
R
R
1:1
Jointing
D1
D
ØD ØD1 B B1 R Ød Rub Collar Tool No.
3 1-3/4 3/4 1/2 15/64 1/2 & 3/4 C-006** 968
Door
Making
REVERsIBLE/matChED OGEE
d
B B1
R
R
1:1
D1
D
ØD ØD1 B B1 R Ød Rub Collar Tool No.
3-1/4 1-3/4 7/8 3/8 1/2 1/2 & 3/4 C-006** 969
DOUBLE FLUtE COVE
d
Shaper Cutters
Industrial Quality • Carbide Tipped • 3-Wing
BR
1:1
D1
D
ØD ØD1 B R Ød Rub Collar Tool No.
2-5/8 2-3/8 7/8 1/8 1/2 & 3/4 C-015** SC620
Replacement ‘T’ bushing(s) #BU-550.
For rub collars & bushings. See pages 332–333.
*Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only!
3D renderings & tool illustrations not shown at actual size.
288 Wood profiles shown at actual size. Visit our website for additional 1:1 profiles.
tRIPLE BEaD
d Grooving
Profiling
B B1 R
Jointing
1:1
ØD B B1 R Ød Rub Collar Tool No. Door
Making
2-5/8 1 5/8 5/64 1/2 & 3/4 C-015**, C-028** 960
tRIPLE FLUtING
d
B B1 R
1:1
ØD B B1 R Ød Rub Collar Tool No.
Shaper Cutters
Industrial Quality • Carbide Tipped • 3-Wing
2-5/8 1 5/8 5/64 1/2 & 3/4 C-015**, C-028** 961
For rub collars & bushings. See pages 332–333.
*Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only!
3D renderings & tool illustrations not shown at actual size.
Wood profiles shown at actual size. Visit our website for additional 1:1 profiles. www.amanatool.com 289
Wainscot and paneling are a great way to add visual interest to walls. Paneling is used to cover an entire wall while wainscot stops at
the chair rail. Amana Tool® offers three styles of profiles to choose from.
The first, wainscot with a ‘V,’ provides a simple forty-five degree ‘V’ profile along the edges of the stock. The other two sets create
a 5/16" diameter bead along the edges of the stock. All three sets are designed for 3/4" thick stock and create an interlocking 1/4"
tongue-and-groove joint for ease of assembly.
d d
a°
T1
a°
T B
T1
L
D1 D1
D D
Fence Fence
Shaper Cutters
Industrial Quality • Carbide Tipped • 3-Wing
SC420 Set
Table Table
45° 90°
3/8"
3/4" 1/4"
3/8" 1:1
1/4"
ØD ØD1 B a° T T1 L Ød Rub Collar Tool No.
3-1/2 3 1 45° 1/4 3/8 1/4 1/2 & 3/4 C-016** (SET)
For rub collars & bushings. See pages 332–333.
*Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only!
3D renderings & tool illustrations shown at actual size.
Wood profiles shown at actual size. Visit our website for additional 1:1 profiles.
Wainscot With Bead Cutters
d L L1 d d
Grooving
T1
T B B
R
T1 D1
Profiling
D
D1 D2
D D
Jointing
Fence Fence Fence
SC430 Set
Table Table Table SC424
7/16" 1/4" Door
R 5/32"
5/16" 3/16" Making
3/8"
1/16" 3/4" 1/4"
3/8" 1:1
1/16"
ØD ØD1 ØD2 B T T1 R L L1 Ød Rub Collar Tool No.
3 2-1/2 2-5/8 1 1/4 3/8 — 1/4 3/16 1/2 & 3/4 47822** SC430 (SET)
3 2-11/16 — 7/16 1/16 5/16 5/32 — — 1/2 & 3/4 C-019** SC424
Wainscot With ‘V’ & Bead Cutters
d L L d
d
C a° T1
T1
B T T B
T1 R L
a°
D1 D1 D1
D D D
Fence Fence Fence
Table SC432 Table SC422 Table SC426
Shaper Cutters
Industrial Quality • Carbide Tipped • 3-Wing
5/16" 1/4"
45° 3/16" 7/32" 45°
3/8"
R 5/32"
3/4" 1/4"
3/8" 1:1
1/16"
ØD ØD1 B a° T T1 R L Ød Rub Collar Tool No.
3 2-5/8 1 — 1/4 3/8 — 3/16 1/2 & 3/4 47822** SC432
3 2-1/2 1 45˚ 3/8 1/4 — 1/4 1/2 & 3/4 C-017** SC422
2-13/16 2-3/8 25/32 45˚ 5/16 1/4 5/32 7/32 1/2 & 3/4 C-017** SC426
For rub collars & bushings. See pages 332–333.
*Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only!
3D renderings & tool illustrations not shown at actual size.
Wood profiles shown at actual size. Visit our website for additional 1:1 profiles. www.amanatool.com 291
Build your own wood floors with this matched shaper cutter set, which ensures
perfectly aligned tongue and groove flooring strips. The unique rounded edge
created by these cutters makes flooring fast and easy to install, while the nail
slot helps prevent splitting.
C1 d C d
R1
B T
R 1:1 SC450
D D1
ØD ØD1 B C C1 T R R1 Ød Rub Collar Tool No.
3-1/4 2-25/32 7/8 1/4 11/32 1/4 1/8 1/16 1/2 & 3/4 C-029, C-014**
3-1/4 2-13/16 7/8 1/4 11/32 1/4 1/8 1/16 1 & 1-1/4 C-042, C-040***
‘V’ paneling is a quick and easy way to add architectural detail to any room.
These two-piece sets are perfectly matched so that you can shape precisely
milled paneling strips in any wood species.
d d
a°
B
D1 D1
D2 1:1 938
D D
ØD ØD1 ØD2 B a° Ød Rub Collar Tool No.
2-5/8 2-1/4 1-1/2 29/32 45° 1/2 & 3/4 C-008**
Shaper Cutters
Industrial Quality • Carbide Tipped • 3-Wing
C d C d
B
a°
1:1 SC640
D1 D1
D D
ØD ØD1 B C a° Ød Rub Collar For Material Tool No.
2-5/8 1-1/8 3/4 7/16 45° 1/2 & 3/4 C-006, C-011** 1/2
2-3/4 2 1 5/8 45° 1/2 & 3/4 C-010, C-043* 3/4
For rub collars & bushings. See pages 332–333.
*Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only!
3D renderings & tool illustrations shown at actual size.
Wood profiles shown at actual size. Visit our website for additional 1:1 profiles.
d
B
1:1
D
ØD B Ød Repl. Ball Bearing Tool No.
2-13/32 1 1/2 & 3/4 47757 (42mm x 3/4 x 9mm)
d
1:1
D
ØD B Ød Repl. Ball Bearing Tool No.
2-13/32 1 1/2 & 3/4 47757 (42mm x 3/4 x 9mm)
d
1:1
D
ØD B Ød Repl. Ball Bearing Tool No.
2-13/32 1 1/2 & 3/4 47757 (42mm x 3/4 x 9mm)
Shaper Cutters
Industrial Quality • Carbide Tipped • 3-Wing
d
1:1
D
ØD B Ød Repl. Ball Bearing Tool No.
2-13/32 1 1/2 & 3/4 47757 (42mm x 3/4 x 9mm)
For rub collars & bushings. See pages 332–333.
3D renderings & tool illustrations shown at actual size.
Wood profiles shown at actual size. Visit our website for additional 1:1 profiles. www.amanatool.com
STILE & RAIL CAbINET dOOR SETS FOR 5/8" TO 3/4" MATERIAL
Concave With Eased Edge
Grooving
d L d
R Eased edge corners
Profiling R
B
T
1:1
D1 D1
Jointing D D
ØD ØD1 B T L R Ød Rub Collar Tool No.
3 2-9/32 3/4 1/4 11/32 1/4 1/2 & 3/4 C-014** SC441
Door
Making
STILE & RAIL CAbINET dOOR SETS FOR 3/4" TO 1" MATERIAL
These Stile & Rail sets are great for making cabinet doors.
Concave
C d L d
T
B
R
R 1:1
D D
ØD C B T L R Ød Rub Collar Tool No.
2-11/16 1/4 1 1/4 7/16 1/4 1/2 & 3/4 C-009** SC440
3-9/16 1/4 1 1/4 7/16 1/4 1 & 1-1/4 C-019, C-021*** SC540
Concave
C d L d
R
B
R T
D D 1:1
ØD C B T L R Ød Rub Collar Tool No.
3-9/16 1/4 1 1/4 7/16 13/64 1 & 1-1/4 C-019, C-021*** SC550
Shaper Cutters
Industrial Quality • Carbide Tipped • 3-Wing
Ogee
d L d
R
B T
1:1 SC444
D D
ØD B T L R Ød Rub Collar Tool No.
2-11/16 1 1/4 7/16 1/8 1/2 & 3/4 C-007, C-012*** SC444
For rub collars & bushings. See pages 332–333.
*Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only!
3D renderings & tool illustrations not shown at actual size.
294 Wood profiles shown at actual size. Visit our website for additional 1:1 profiles.
STILE & RAIL CAbINET dOOR SETS FOR 3/4" MATERIAL
Bead Grooving
C d L d
T
B Profiling
R 1:1
D D
Jointing
ØD C B T L R Ød Rub Collar Tool No.
2-11/16 3/8 1 1/4 7/16 9/32 1/2 & 3/4 C-007, C-010*** SC446
3-9/16 3/8 1 1/4 7/16 9/32 1 & 1-1/4 C-019, C-020*** SC546
Ogee Door
Making
C d L d
T
B
R
R1 1:1
D D
ØD C B T L R R1 Ød Rub Collar Tool No.
2-11/16 3/8 1 1/4 7/16 5/16 3/16 1/2 & 3/4 C-007, C-010*** SC442
3-9/16 3/8 15/16 1/4 7/16 1/4 3/16 1 & 1-1/4 C-019, C-020*** SC542
GLASS dOOR & MuLLION SET SC442 (TOP)
For SC442 And SC446
Used in conjuction with cutter SC442 and SC446 to make rabbets for the back of doors
for glass door panels or mullions. Glass must be secured in place with molding. SC445 (BOTTOM)
d d
1:1
SC446
shown SC446 (TOP)
B SC445 SC445 (BOTTOM)
B
D D1 1:1
ØD ØD1 B Ød Tool No
Shaper Cutters
Industrial Quality • Carbide Tipped • 3-Wing
2-7/8 1-13/16 1/2 3/4 SC445
Ogee
C d L d
T
R B
R
D D 1:1
ØD C B T L R Ød Rub Collar Tool No.
3-9/16 3/8 1 1/4 7/16 9/64 1 & 1-1/4 C-019, C-020*** SC548
For rub collars & bushings. See pages 332–333.
*Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only!
3D renderings & tool illustrations not shown at actual size.
Wood profiles shown at actual size. Visit our website for additional 1:1 profiles. www.amanatool.com 295
Grooving
Profiling
Jointing
Door
Making
FLAT PANEL CABINET DOOR MAKING SET
AdjuSTAbLE TONGuE & GROOVE
CAbINET dOOR SETS
5/8" TO 1-1/4" MATERIAL
Shaker and Arts & Crafts
• Designed to cut precise grooves to provide undersized plywood veneered panels
with a snug rattle-free fit.
• Adjust the panel groove width 3/16" to 9/32" for 1/4" plywood.
• 5.5mm for undersized 1/4" plywood and 5.9mm for oversized 1/4" veneered plywood.
d L L d
See Pages 130-132 for
Instile & Rail System™
C
Adjustable Tongue & Groove
B Router Bit Sets.
T
C
See Page 326 for
Instile & Rail System™
Adjustable Tongue & Groove
D1 D1 Insert Carbide Shaper Cutter Set.
D D
Shaper Cutters
Industrial Quality • Carbide Tipped • 3-Wing
3/16" 9/32" 1
1:1
1:1
Minimum
Maximum
ØD ØD1 B C T L Ød Rub Collar Tool No.
2-3/8 1-5/8 1 to 1-5/16 7/16 3/16 to 9/32 3/8 1/2 & 3/4 C-005** SC555
2-59/64 2-5/32 1-1/16 to 1-21/64 7/16 3/16 to 9/32 3/8 1 & 1-1/4 C-051*** SC553
For rub collars & bushings. See pages 332–333.
*Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only!
3D renderings & tool illustrations not shown at actual size.
296 Wood profiles shown at actual size. Visit our website for additional 1:1 profiles.
FLAT PANEL CABINET DOOR MAKING SET
Accommodates Undersized Plywood
3/16"
22.5˚ d L L d 22.5˚
1:1
Minimum
C
T
B
C
D1 D1 9/32"
D D
1:1
Maximum
ØD ØD1 B C T L Ød Rub Collar Tool No.
2-3/8 1-5/8 1-1/16 to 1-21/64 7/16 3/16 to 9/32 3/8 1/2 & 3/4 C-005**
d L d
C
B
T
C
D1 D1
D D
Shaper Cutters
Industrial Quality • Carbide Tipped • 3-Wing
1:1 SC554
ØD ØD1 B C T L Ød Rub Collar For Material Tool No.
2-3/4 1-7/8 1 3/8 1/4 7/16 1/2 & 3/4 C-008** 5/8 to 1
3-3/8 2-1/2 1-1/8 7/16 1/4 7/16 1 & 1-1/4 C-017*** 5/8 to 1-1/8
2-3/4 1-7/8 1-3/4 11/16 3/8 7/16 1/2 & 3/4 C-008** 3/4 to 1-3/4
3-1/4 2-3/8 1-3/4 11/16 3/8 7/16 1 & 1-1/4 C-041*** 3/4 to 1-3/4
3-1/2 2-1/2 2-1/8 13/16 1/2 1/2 1 & 1-1/4 C-017*** 1 to 2-1/8
For rub collars & bushings. See pages 332–333.
*Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only!
3D renderings & tool illustrations shown at actual size.
Wood profiles shown at actual size. Visit our website for additional 1:1 profiles. www.amanatool.com
STILE & RAIL CAbINET dOOR SETS
Grooving
FOR 1" TO 1-3/4" MATERIAL
Cabinet Molding Set With 1/4"W X 3/8"D Tongue & Groove
Profiling
d d
913
910
Jointing 919
R B1
918 R1
B 914
R1
R
909 D1
D
Door
Making
D1
D
1:1 921
ØD ØD1 B B1 R R1 Ød Rub Collar Tool No.
2-5/8 1-7/8 1-13/16 1 1/8 5/32 1/2 & 3/4 C-008** 921
Includes:
Cabinet R.H. female 909
Cabinet L.H. female 910
Cabinet L.H. male 913
Cabinet R.H. male 914
1/4" Straight 918
Steel spacer 919
‘T’ bushing, 1/2" x 3/4" (4 pcs.) BU-550
Sleeve bushing, 1/2" x 3/4" x 1/2" long BU-900
Sleeve bushing, 1/2" x 3/4" x 1-1/8" long BU-930
STILE & RAIL CAbINET dOOR SETS
FOR 7/8" TO 1-3/16" MATERIAL
Concave
C d L d
Shaper Cutters
Industrial Quality • Carbide Tipped • 3-Wing
R
B T
R
D D 1:1 SC460
ØD C B T L R Ød Rub Collar Tool No.
2-7/8 1/4 1-3/16 1/4 7/16 15/64 1/2 & 3/4 C-009*** SC460
3-9/16 1/4 1-3/16 1/4 7/16 15/64 1 & 1-1/4 C-019*** SC560
For rub collars & bushings. See pages 332–333.
*Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only!
3D renderings & tool illustrations not shown at actual size.
298 Wood profiles shown at actual size. Visit our website for additional 1:1 profiles.
STILE & RAIL CAbINET dOOR SET
FOR 1" MATERIAL Grooving
Bead
d C d
L Profiling
T B
Jointing
R
D D
1:1
Door
ØD C B T L R Ød Rub Collar Tool No. Making
3-9/16 3/8 1-3/8 1/4 7/16 9/32 1 & 1-1/4 C-019*** SC562
STILE & RAIL CAbINET dOOR SET
FOR 1" MATERIAL
Ogee
d C d
L
B T
R
D D
1:1
ØD C B T L R Ød Rub Collar Tool No.
3-9/16 3/8 1-3/16 1/4 7/16 5/32 1 & 1-1/4 C-019*** SC564
Shaper Cutters
Industrial Quality • Carbide Tipped • 3-Wing
For rub collars & bushings. See pages 332–333.
*Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only!
3D renderings & tool illustrations not shown at actual size.
Wood profiles shown at actual size. Visit our website for additional 1:1 profiles. www.amanatool.com 299
STILE & RAIL CAbINET dOOR SETS
Grooving
FOR 1-5/16" MATERIAL
Ogee Stile & Rail Set With 1/4"W x 5/16"D Tongue & Groove
d d
R 995
Profiling R1
996
917
919 B
948 948
Jointing
D1 D2
D2 D 1:1
ØD D1 D2 B R R1 Ød Rub Collar Tool No.
Door
Making 3-1/8 1-7/8 2-1/2 1-5/16 3/16 5/32 1/2 & 3/4 C-008, C-016** 994
Includes:
1/2" straight (2 pcs.) 948
1/4" straight 917
Steel spacer 919
Ogee stile 995
Rail for ogee stile 996
‘T’ bushing, 1/2" x 3/4" (4 pcs.) BU-550
Sleeve bushing, 1/2" x 3/4" x 3/4" long (2 pcs.) BU-910
STILE & RAIL CAbINET dOOR SET
FOR 1-5/16" MATERIAL
Concave Stile & Rail Set
With 1/4"W x 5/16"D Tongue & Groove
d d
R 942
941
917
919 B
948 948
D2 D
1:1
D D1
ØD D1 D2 B R Ød Rub Collar Tool No.
Shaper Cutters
Industrial Quality • Carbide Tipped • 3-Wing
2-1/2 1-7/8 3-1/8 1-17/64 5/16 1/2 & 3/4 C-008**, C-016** 940
Includes:
Concave stile 941
Rail for concave stile 942
1/2" straight (2 pcs.) 948
1/4" straight 917
Steel spacer 919
‘T’ bushing, 1/2" x 3/4" (4 pcs.) BU-550
Sleeve bushing, 1/2" x 3/4" x 3/4" long (2 pcs.) BU-910
For rub collars & bushings. See pages 332–333.
*Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only!
3D renderings & tool illustrations not shown at actual size.
300 Wood profiles shown at actual size. Visit our website for additional 1:1 profiles.
STILE & RAIL CAbINET dOOR SETS
FOR 1-3/8" MATERIAL Grooving
Ogee
d L d
Profiling
R
B T
Jointing
D1 D1
D D
1:1 SC580
Door
ØD B D1 T L R Ød Rub Collar Tool No. Making
3-9/16 1-1/2 — 1/4 9/16 3/16 1 & 1-1/4 C-017*** SC580
3-9/16 1-3/4 2-1/2 1/2 17/32 3/16 1 & 1-1/4 C-017*** SC581
STILE & RAIL CAbINET dOOR SETS
FOR 1-9/16" MATERIAL
Bead
d L d
R
C
C1
B T
D1 D1
D D
Shaper Cutters
Industrial Quality • Carbide Tipped • 3-Wing
1:1
ØD D1 B L C C1 R Ød T Rub Collar Tool No.
2-27/32 1-27/32 1-9/16 1/2 17/32 1/8 5/16 1/2 & 3/4 7/32 C-007** SC582
3-9/16 2-9/16 1-9/16 1/2 17/32 1/8 5/16 1 & 1-1/4 7/32 C-018*** SC583
† For grill/mullion on passage doors with divided glass.
For rub collars & bushings. See pages 332–333.
*Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only!
3D renderings & tool illustrations not shown at actual size.
Wood profiles shown at actual size. Visit our website for additional 1:1 profiles. www.amanatool.com 301
STILE & RAIL CAbINET dOOR SETS
Grooving
FOR 1-3/8" MATERIAL
Bead & Cove
C d L d
Profiling
R
B T
Jointing
D1 D1
D D
Door
Making 1:1 SC584
ØD ØD1 C B T L R Ød Rub Collars Tool No.
3-1/16 2-1/32 33/64 1-9/16 1/4 9/16 3/16 1/2 & 3/4 C-039** SC585
3-9/16 — 7/8 1-5/8 1/4 9/16 13/64 1 & 1-1/4 C-018*** SC584
STILE & RAIL CAbINET dOOR SET
FOR 1-3/8" MATERIAL
Convex Stile & Rail Set
With 1/4"W X 5/16"D Tongue & Groove
3-Wing
D2 D2
d d
R 946
947
917
919 B
948 948
D1 D 1:1
ØD ØD1 ØD2 B R Ød Rub Collars Tool No.
3-1/8 1-7/8 2-1/2 1-23/64 5/16 1/2 & 3/4 C-008, C-016** 945
Shaper Cutters
Industrial Quality • Carbide Tipped • 3-Wing
Includes:
Convex stile 946
Rail for convex stile 947
1/2" straight (2 pcs.) 948
1/4" straight 917
Steel spacer 919
‘T’ bushing, 1/2" x 3/4" (4 pcs.) BU-550
Sleeve bushing, 1/2" x 3/4" x 3/4" long (2 pcs.) BU-910
For rub collars & bushings. See pages 332–333.
*Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only!
3D renderings & tool illustrations not shown at actual size.
302 Wood profiles shown at actual size. Visit our website for additional 1:1 profiles.
STILE & RAIL EXTERIOR dOOR SET
FOR 1-3/4" MATERIAL Grooving
Bead & Cove
C d L d Profiling
Jointing
B T
Door
D D Making
1:1
ØD C B T L R Ød Rub Collar Tool No.
2-7/8 1/2 1-3/4 1/4 1/2 21/64 1/2 & 3/4 C-008** SC590
STILE & RAIL EXTERIOR dOOR SETS
FOR 1-3/4" MATERIAL
Cove & Bead Set
With 1/4"W x 17/32"D Tongue & Groove
D D2
d d
907
916
917 R 919
R1
B
R R1
908
915
D3 D1
Shaper Cutters
Industrial Quality • Carbide Tipped • 3-Wing
1:1
ØD ØD1 ØD2 ØD3 B R R1 Ød Rub Collars Tool No.
3-1/8 1-7/8 2-5/16 2-1/16 1-3/4 15/64 11/32 1/2 & 3/4 C-008, C-022** 922 †
3-5/8 2-3/8 3-7/16 3-9/16 1-3/4 11/32 1-5/64 1 & 1-1/4 — 924
† For replacement cutters, see references in above photo.
For rub collars & bushings. See pages 332–333.
*Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only!
3D renderings & tool illustrations not shown at actual size.
Wood profiles shown at actual size. Visit our website for additional 1:1 profiles. www.amanatool.com 303
C d L d
R
B T
D1 D1
D D
1:1 SC592 1:1 SC593 1:1 SC596
ØD ØD1 C B T L R Ød Rub Collar Tool No.
2-7/8 1-13/16 17/32 2 1/4 9/16 25/64 1/2 & 3/4 C-007**
3-11/32 2-5/16 33/64 1-31/32 1/4 9/16 25/64 1 & 1-1/4 C-040***
3-17/32 2-17/32 1/2 2-1/8 1/2 1/2 25/64 1 & 1-1/4 C-018***
Shaper Cutters
Industrial Quality • Carbide Tipped • 3-Wing
For rub collars & bushings. See pages 332–333.
*Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only!
3D renderings & tool illustrations shown at actual size.
Wood profiles shown at actual size. Visit our website for additional 1:1 profiles.
STILE & RAIL EXTERIOR dOOR SET
FOR 2" MATERIAL Grooving
Ogee
Profiling
d L d
R
Jointing
B T
Door
D D Making
1:1
ØD B T L R Ød Rub Collars Tool No.
3-9/16 2-1/16 1/4 9/16 1/4 1 & 1-1/4 C-018*** SC594
STILE & RAIL EXTERIOR dOOR SET
FOR 2-1/8" MATERIAL
Bead
C d L d
B T
Shaper Cutters
Industrial Quality • Carbide Tipped • 3-Wing
D1 D1
D D
1:1
ØD ØD1 C B T L R Ød Rub Collar Tool No.
3-17/32 2-17/32 1/2 2-1/8 1/2 1/2 25/64 1 & 1-1/4 C-018*** SC596
For rub collars & bushings. See pages 332–333.
*Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only!
3D renderings & tool illustrations not shown at actual size.
Wood profiles shown at actual size. Visit our website for additional 1:1 profiles. www.amanatool.com 305
RAISEd PANEL FOR 5/8" MATERIAL
Grooving Cove
C d
Profiling
B
R a°
1:1 SC658
Jointing D
ØD B C R a° Ød Rub Collar Tool No.
4-5/8 5/8 1-3/16 2-23/64 6° 1/2 & 3/4 C-005*** SC658
5-1/2 5/8 1-1/2 1-29/32 6° 1 & 1-1/4 C-017*** SC514
Door Traditional
Making
C d
B
a° 1:1 SC652
D
ØD B C a° Ød Rub Collar Tool No.
4-5/8 5/8 1-3/16 15° 1/2 & 3/4 C-005*** SC652
5-1/2 5/8 1-1/2 12° 1 & 1-1/4 C-017*** SC516
Traditional
C d
B
R a°
1:1 SC650
D
ØD B C R a° Ød Rub Collar Tool No.
4-5/8 5/8 1-3/16 5/32 5° 1/2 & 3/4 C-005*** SC650
5-1/2 5/8 1-1/2 1/8 12° 1 & 1-1/4 C-017*** SC518
Shaper Cutters
Industrial Quality • Carbide Tipped • 3-Wing
Ogee
1:1 SC654
C d
B
R a°
1:1 SC520
D
ØD B C R Ød Rub Collar Tool No.
4-5/8 5/8 1-3/16 1-1/2 1/2 & 3/4 C-005*** SC654
5-1/2 5/8 1-1/2 1-9/16 1 & 1-1/4 C-017*** SC520
For rub collars & bushings. See pages 332–333.
*Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only!
3D renderings & tool illustrations not shown at actual size.
306 Wood profiles shown at actual size. Visit our website for additional 1:1 profiles.
RAISEd PANEL FOR 5/8" MATERIAL
Classical Grooving
C d
Profiling
B
a°
R 1:1 SC522
D
Jointing
ØD B C R a° Ød Rub Collar Tool No.
4-5/8 5/8 1-3/16 1/8 12° 1/2 & 3/4 C-005*** SC656
5-1/2 5/8 1-1/2 5/32 7° 1 & 1-1/4 C-017*** SC522
Traditional
C d Door
Making
B
R 1:1
D
ØD B C R Ød Rub Collar Tool No.
5 5/8 1-1/2 1/8 1/2 & 3/4 C-010** SC690
5-1/2 5/8 1-1/2 1/8 1 & 1-1/4 C-017*** SC524
Traditional
C d
B
R 1:1
D
ØD B C R Ød Rub Collar Tool No.
5-1/2 5/8 1-1/2 9/64 1 & 1-1/4 C-017*** SC526
Traditional
C d
B
a°
R 1:1
D
Shaper Cutters
Industrial Quality • Carbide Tipped • 3-Wing
ØD B C R a° Ød Rub Collar Tool No.
5 5/8 1-1/2 5/32 4° 1/2 & 3/4 C-010** SC694
5-1/2 5/8 1-1/2 5/32 4° 1 & 1-1/4 C-017*** SC528
Traditional
C d
B
a°
R R1 1:1
D
ØD B C R R1 a° Ød Rub Collar Tool No.
5-1/2 5/8 1-1/2 1-5/16 1-15/16 28° 1 & 1-1/4 C-017*** SC530
For rub collars & bushings. See pages 332–333.
*Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only!
3D renderings & tool illustrations not shown at actual size.
Wood profiles shown at actual size. Visit our website for additional 1:1 profiles. www.amanatool.com 307
RAISEd PANEL
Grooving
FOR 5/8" MATERIAL
Horizontal Panel Raising / Shear Face
Traditional
C d
Profiling
B1
B
a°
Jointing R
1:1
D
Counter-clockwise rotation: Wood face-up
ØD B B1 R C a° Ød Rub Collar Tool No.
5-1/2 5/8 3/8 5/32 1-1/2 5° 1 & 1-1/4 C-017*** 931
Door
Making
RAISEd PANEL
FOR 5/8" MATERIAL
Horizontal Panel Raising / Shear Face
Traditional
C d
B1
B
a°
1:1
D
ØD B B1 C a° Ød Rub Collar Tool No.
4-5/8 5/8 5/16 1-1/2 15° 1/2 & 3/4 C-005** SC401
5-1/2 5/8 5/16 1-1/2 15° 1 & 1-1/4 C-017*** 984
RAISEd PANEL
FOR 5/8" MATERIAL
Vertical Panel Raising / Shear Face
Traditional
B d
B1
Shaper Cutters
Industrial Quality • Carbide Tipped • 3-Wing
a°
C
1:1
ØD B B1 C a° Ød Rub Collar Tool No.
3-1/2 5/8 5/16 1-5/8 15° 1/2 & 3/4 47822** 984-VC
Note: Reveal (C) shown on all above tools reflects the total length of cut. Therefore, you must deduct 3/8" (usually) for allowing the panel to
recess into the frame. Replacement ‘T’ bushings #BU-720 (2 required).
For rub collars & bushings. See pages 332–333.
*Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only!
3D renderings & tool illustrations not shown at actual size.
308 Wood profiles shown at actual size. Visit our website for additional 1:1 profiles.
RAISEd PANEL
FOR 5/8" MATERIAL Grooving
Vertical Panel Raising / Shear Face
Cove
B d
B1 Profiling
R
C Jointing
1:1
D
Door
ØD B B1 R C Ød Rub Collar Tool No. Making
3-1/2 5/8 1/4 1-9/16 1-5/8 1/2 & 3/4 47822** 987-VC
RAISEd PANEL
FOR 19/32" MATERIAL
Classical
B d
B1
R
a°
1:1
D
ØD B B1 R C a° Ød Rub Collar Tool No.
3-1/2 19/32 3/16 1/8 1-5/8 12° 1/2 & 3/4 C-016** 986-VC
RAISEd PANEL
FOR 21/32" MATERIAL
Ogee
B d
B1
R
Shaper Cutters
C Industrial Quality • Carbide Tipped • 3-Wing
1:1
ØD B B1 R C Ød Rub Collar Tool No.
3-1/2 21/32 9/32 3/4 1-5/8 1/2 & 3/4 C-016** 985-VC
Note: Reveal (C) shown on all above tools reflects the total length of cut. Therefore, you must deduct 3/8" (usually) for allowing the panel to
recess into the frame. Replacement ‘T’ bushings #BU-720 (2 required).
For rub collars & bushings. See pages 332–333.
*Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only!
3D renderings & tool illustrations not shown at actual size.
Wood profiles shown at actual size. Visit our website for additional 1:1 profiles. www.amanatool.com 309
RAISEd PANEL FOR 11/16" MATERIAL
Horizontal Panel Raising / Shear Face
Grooving
Ogee
C d
Profiling B1
B
R
Jointing 1:1
D
ØD B B1 R C Ød Rub Collar Tool No.
4-5/8 11/16 9/32 7/8 1-1/2 1/2 & 3/4 C-005** SC403
5-1/2 11/16 9/32 3/4 1-1/2 1 & 1-1/4 C-017*** 985
Door
Making Classical
C d
B1
B
a°
R
1:1
D
ØD B B1 R C a° Ød Rub Collar Tool No.
4-5/8 11/16 11/32 1/8 1-1/2 12° 1/2 & 3/4 C-005** SC405
5-1/2 11/16 11/32 1/8 1-1/2 12° 1 & 1-1/4 C-017*** 986
Cove
C d
B1
B
R
1:1
D
ØD B B1 R C Ød Rub Collar Tool No.
4-5/8 11/16 7/32 2-1/2 1-1/2 1/2 & 3/4 C-005** SC407
5-1/2 11/16 7/32 1-9/16 1-1/2 1 & 1-1/4 C-017*** 987
RAISEd PANEL bACk
With Ball Bearing Rub Collar
Shaper Cutters
Industrial Quality • Carbide Tipped • 3-Wing
R d
1:1
D
ØD B R Ød Rub Collar Tool No.
3-1/2 1/2 1/4 1/2 & 3/4 C-006** 980
3-39/64 1/2 1/4 1 & 1-1/4 C-045*** 989
For rub collars & bushings. See pages 332–333.
*Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only!
3D renderings & tool illustrations not shown at actual size.
310 Wood profiles shown at actual size. Visit our website for additional 1:1 profiles.
RAISEd PANEL FOR 3/4" MATERIAL
Cove Grooving
d
Profiling
B
R
D 1:1 SC400
Jointing
ØD B R Ød Rub Collar Tool No.
4-15/16 11/16 1-57/64 1/2 & 3/4 C-004*** SC400
5-1/2 5/8 1-57/64 1 & 1-1/4 C-017*** SC500
Door
Making
Ogee
d
C
B
R
R1
1:1 SC402
D
ØD B C R R1 Ød Rub Collar Tool No.
4-15/16 3/4 3/8 1-15/32 1/8 1/2 & 3/4 C-004*** SC402
5-1/2 5/8 5/16 1-15/32 1/8 1 & 1-1/4 C-017*** SC502
Traditional
d
C
B
a°
D 1:1 SC404
ØD B C a° Ød Rub Collar Tool No.
4-15/16 5/8 1/4 17° 1/2 & 3/4 C-004*** SC404
5-1/2 5/8 1/4 17° 1 & 1-1/4 C-017*** SC504
Shaper Cutters
Industrial Quality • Carbide Tipped • 3-Wing
Traditional
d
B
R a°
1:1 SC406
D
ØD B R a° Ød Rub Collar Tool No.
4-15/16 9/16 13/64 13° 1/2 & 3/4 C-004*** SC406
5-1/2 5/8 13/64 13° 1 & 1-1/4 C-017*** SC506
For rub collars & bushings. See pages 332–333.
*Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only!
3D renderings & tool illustrations not shown at actual size.
Wood profiles shown at actual size. Visit our website for additional 1:1 profiles. www.amanatool.com 311
RAISEd PANEL FOR 3/4" MATERIAL
Grooving Ogee
d
Profiling C
B
R a°
R1 1:1 SC508
D
Jointing ØD B C R R1 a° Ød Rub Collar Tool No.
4-15/16 11/16 3/8 1-31/32 1-3/8 23° 1/2 & 3/4 C-004*** SC408
5-1/2 5/8 5/16 1-31/32 1-31/32 23° 1 & 1-1/4 C-017*** SC508
Classical d
Door
Making
C
B
R R1
1:1
D
ØD B C R R1 Ød Rub Collar Tool No.
5-1/2 5/8 3/8 13/64 1/8 1 & 1-1/4 C-017*** SC510
Classical d
C
B
a°
R 1:1
D
ØD B C R a° Ød Rub Collar Tool No.
5-1/2 5/8 1/4 13/64 10° 1 & 1-1/4 C-017*** SC512
Cove & Corner Round
d
C
B
a°
R R1 1:1
D
Shaper Cutters
Industrial Quality • Carbide Tipped • 3-Wing
ØD B C R R1 Ød Rub Collar Tool No.
5-1/2 5/8 1/4 1/8 5/32 1 & 1-1/4 C-017*** SC509
Cove & Corner Round
d
C
B
a° 1:1
R
D
ØD B C R a° Ød Rub Collar Tool No.
5-1/2 5/8 1/4 1/8 4° 1 & 1-1/4 C-017*** SC511
For rub collars & bushings. See pages 332–333.
*Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only!
3D renderings & tool illustrations not shown at actual size.
312 Wood profiles shown at actual size. Visit our website for additional 1:1 profiles.
GroovinG 7-1
EN8447-2
E N8
With Scorer 4mm to 6mm
Grooving Hard wearing steel body complete with tungsten carbide knives and scorer for
improved finish. Suitable for producing grooves and slots in softwood, hardwood
and man-made boards (with or without coating) on a spindle molder. Can be
used with spacer rings for comb jointing.
Rabbeting
t
B
d
D
Planing
Profiling
ØD B Teeth Ød Max. t RPM Repl. T.C.Knife Tool No.
125mm(5) 4mm(5/32) 4+4 1-1/4 35mm(1-3/8) 6,100-10,500 RCK-18 RCK-71 61451
Jointing 125mm(5) 5mm(3/16) 4+4 1-1/4 35mm(1-3/8) 6,100-10,500 RCK-19 RCK-71 61453
125mm(5) 6mm(15/64) 4+4 1-1/4 35mm(1-3/8) 6,100-10,500 RCK-33 RCK-71 61454
125mm(5) 1/4 4+4 1-1/4 35mm(1-3/8) 6,100-10,500 RCK-33 RCK-71 61466
150mm(5-7/8) 4mm(5/32) 4+4 1-1/4 45mm(1-3/4) 5,200-8,900 RCK-18 RCK-71 61455
150mm(5-7/8) 5mm(3/16) 4+4 1-1/4 45mm(1-3/4) 5,200-8,900 RCK-19 RCK-71 61456
150mm(5-7/8) 6mm(15/64) 4+4 1-1/4 45mm(1-3/4) 5,200-8,900 RCK-33 RCK-71 61457
Door 180mm(7-1/16) 4mm(5/32) 8+8 1-1/4 55mm(2-5/32) 4,200-7,200 RCK-18 RCK-71 61458
Making 180mm(7-1/16) 5mm(3/16) 8+8 1-1/4 55mm(2-5/32) 4,200-7,200 RCK-19 RCK-71 61459
180mm(7-1/16) 6mm(15/64) 8+8 1-1/4 55mm(2-5/32) 4,200-7,200 RCK-33 RCK-71 61461
Lamello®
Profile Pro™
AdjustAble GroovinG 7-1
EN8447-2
EN8
Accessories
With Scorer 4mm to 7.5mm
Hard wearing steel body complete with tungsten carbide knives & scorer for
Insert Shaper Cutters
improved finish. Suitable for producing various thickness grooves and slots
in softwood, hardwood and man-made boards (with or without coating) on
a spindle molder. Cutting width can be adjusted in 0.1mm increments by using
supplied spacer rings.
t
B
E
d
D
ØD B Teeth E Ød Max. t RPM Repl. T.C. Knife Tool No.
160mm(6-5/16) 4 to 7.5mm(5/32 to 19/64) 8+4 6.35(1/4) 1-1/4 30mm(1-3/16) 4,800-8,300 RCK-18 RCK-71 61350
180mm(7-1/16) 4 to 7.5mm(5/32 to 19/64) 8+4 6.35(1/4) 1-1/4 40mm(1-1/2) 4,300-7,500 RCK-18 RCK-71 61352
Industrial Quality
314 3D renderings & tool illustrations not shown at actual size. Visit our website for 1:1 profiles.
3 PArt AdjustAble GroovinG 7-1
EN8447-2
E N8
With Scorer 4mm to 15.5mm
Grooving
Hard wearing steel body complete with tungsten carbide knives and scorer for
improved finish. Suitable for producing various thickness grooves and slots in
softwood, hardwood and man-made boards (with or without coating) on a
spindle molder. Cutting width can be adjusted in 0.1mm increments by using
supplied spacer rings. Rabbeting
t
B
d
D Planing
Profiling
ØD B Teeth Ød Max. t RPM Repl. T.C. Knife Tool No.
150mm(5-7/8) 4 to 15.5mm(5/32 to 5/8) 2+4+4 1-1/4 45mm(1-3/4) 5,500-8,500 AMA-17 RCK-18 RCK-71 61354 Jointing
Door
Making
AdjustAble GroovinG 7-1
EN8447-2
EN8
With Scorer And Ring Nut
Hard wearing steel body complete with tungsten carbide knives and scorer for Lamello®
improved finish. Suitable for producing various thickness grooves and slots in
softwood, hardwood and man-made boards (with or without coating) on a
spindle molder. Cutting width can be adjusted in 0.1mm increments by special
threaded bushing and scale without removing the cutter from the spindle.
Profile Pro™
t
B
Accessories
d
Insert Shaper Cutters
Industrial Quality
D
With Scorer And Ring Nut 4mm to 7.5mm
ØD B Teeth Ød Max. t RPM Repl. T.C.Knife Tool No.
130mm(5-1/8) 4 to 7.5mm(5/32 to 19/64) 8+4 1-1/4 20mm(7/8) 5,900-9,800 RCK-18 RCK-71 61330
160mm(6-5/16) 4 to 7.5mm(5/32 to 19/64) 8+4 1-1/4 30mm(1-3/16) 4,800-8,300 RCK-18 RCK-71 61345
180mm(7-1/16) 4 to 7.5mm(5/32 to 19/64) 8+4 1-1/4 40mm(1-1/2) 4,300-7,500 RCK-18 RCK-71 61346
With Scorer And Ring Nut 8mm to 24mm
ØD B Teeth Ød Max. t RPM Repl. T.C.Knife Tool No.
160mm(6-5/16) 8 to 15mm(5/16 to 19/32) 4+4 1-1/4 30mm(1-3/16) 4,800-8,300 AMA-17 RCK-70 61340
160mm(6-5/16) 12.5 to 24mm(1/2 to 15/16) 4+4 1-1/4 30mm(1-3/16) 4,800-8,300 AMA-19 RCK-70 61342
180mm(7-1/16) 8 to 15mm(5/16 to 19/32) 4+4 1-1/4 40mm(1-1/2) 4,300-7,500 AMA-17 RCK-70 61343
3D renderings & tool illustrations not shown at actual size. Visit our website for 1:1 profiles. www.amanatool.com 315
GroovinG 7-1
EN8447-2
E N8
With Scorer 8mm to 12mm
Grooving Hard wearing steel body complete with tungsten carbide knives and scorer for
improved finish. Suitable for producing grooves and slots in softwood, hardwood
and man-made boards (with or without coating) on a spindle molder.
Rabbeting
t
B
Planing d
D
Profiling
ØD B Teeth Ød Max. t RPM Repl. T.C.Knife Tool No.
125mm(5) 8mm(5/16) 4+4 1-1/4 35mm(1-3/8) 6,100-10,500 AMA-17 RCK-70 61411
125mm(5) 10mm(13/32) 4+4 1-1/4 35mm(1-3/8) 6,100-10,500 AMA-18 RCK-70 61412
Jointing 125mm(5) 12mm(15/32) 4+4 1-1/4 35mm(1-3/8) 6,100-10,500 AMA-19 RCK-70 61413
125mm(5) 1/2 4+4 1-1/4 35mm(1-3/8) 6,100-10,500 AMA-12 RCK-70 61422
150mm(5-7/8) 8mm(5/16) 4+4 1-1/4 45mm(1-3/4) 5,200-8,900 AMA-17 RCK-70 61414
150mm(5-7/8) 10mm(13/32) 4+4 1-1/4 45mm(1-3/4) 5,200-8,900 AMA-18 RCK-70 61415
180mm(7-1/16) 8mm(5/16) 4+8 1-1/4 55mm(2-5/32) 4,200-7,200 AMA-17 RCK-70 61417
180mm(7-1/16) 10mm(13/32) 4+8 1-1/4 55mm(2-5/32) 4,200-7,200 AMA-18 RCK-70 61418
Door
Making 180mm(7-1/16) 12mm(15/32) 4+8 1-1/4 55mm(2-5/32) 4,200-7,200 AMA-19 RCK-70 61419
Lamello®
Profile Pro™
AdjustAble GroovinG 7-1
EN8447-2
EN8
With Scorer 8mm to 24mm
Hard wearing steel body complete with tungsten carbide knives and scorer for
improved finish. Suitable for producing various thickness grooves and slots in
Accessories softwood, hardwood and man-made boards (with or without coating) on a
spindle molder. Cutting width can be adjusted in 0.1mm increments by using
supplied spacer rings.
Insert Shaper Cutters
t
B
d
D
ØD B Teeth Ød Max. t RPM Repl. T.C.Knife Tool No.
160mm(6-5/16) 8 to 15mm(5/16 to 19/32) 4+4 1-1/4 30mm(1-3/16) 4,800-8,300 AMA-17 RCK-70 61360
160mm(6-5/16) 12.5 to 24mm(1/2 to 15/16) 4+4 1-1/4 30mm(1-3/16) 4,800-8,300 AMA-19 RCK-70 61362
180mm(7-1/16) 8 to 15mm(5/16 to 19/32) 4+4 1-1/4 40mm(1-1/2) 4,300-7,500 AMA-17 RCK-70 61364
180mm(7-1/16) 12.5 to 24mm(1/2 to 15/16) 4+4 1-1/4 40mm(1-1/2) 4,300-7,500 AMA-19 RCK-70 61366
Industrial Quality
316 3D renderings & tool illustrations not shown at actual size. Visit our website for 1:1 profiles.
intermediAte stAckAble
7mm, 15mm and 20mm Kerfs
Grooving
Expand the range of the shim-type adjustable groovers with these intermediate
cutters. Works like a stackable dado set: sandwich one or more of the
intermediate cutters between a pair of the groovers (model #’s 61350, 61352,
61360, 61362, 61364, 61366). Find the coarse groove width by stacking the
appropriate selection of cutters on the shaper spindle, and fine-tune the width Rabbeting
by shimming the outside groovers.
t
B Planing
d
D
Profiling
ØD B Teeth Ød Max. t RPM Repl. T.C.Knife Tool No. Jointing
160mm(6-5/16) 7mm(9/32) 2 1-1/4 30mm(1-3/16) 4,800-8,300 AMA-17 61384
160mm(6-5/16) 15mm(19/32) 2 1-1/4 30mm(1-3/16) 4,800-8,300 ICK-15 61386
180mm(7-1/16) 20mm(25/32) 2 1-1/4 30mm(1-3/16) 4,300-7,500 ICK-20 61388
Door
Making
Lamello®
AdjustAble GroovinG 7-1
EN8447-2
And rAbbetinG
EN8
With Scorer 20.6mm to 100mm Profile Pro™
Hard wearing steel body complete with tungsten carbide knives & scorer for
improved finish. Suitable for producing various thickness grooves and rabbets
in softwood, hardwood and man-made boards (with or without coating) on a
spindle molder. Cutting width can be adjusted in 0.1mm increments by using Accessories
supplied spacer rings.
Insert Shaper Cutters
Industrial Quality
t
d
D
ØD B Teeth Ød Max. t RPM Repl. T.C.Knife Tool No.
160mm(6-5/16) 20.6 to 40mm(13/16 to 19/16) 4+4 1-1/4 40mm(1-1/2) 4,800-8,000 ICK-20 RCK-70 61355
160mm(6-5/16) 30.6 to 60mm(1-7/32 to 2-3/8) 4+4 1-1/4 40mm(1-1/2) 4,800-8,000 RCK-30 RCK-70 61356
160mm(6-5/16) 50.6 to 100mm(2 to 3-15/16) 4+4 1-1/4 40mm(1-1/2) 4,800-8,000 ICK-50 RCK-70 61357
200mm(7-7/8) 20.6 to 40mm(13/16 to 19/16) 4+4 1-1/4 50mm(2) 4,000-6,500 ICK-20 RCK-70 61358
3D renderings & tool illustrations not shown at actual size. Visit our website for 1:1 profiles. www.amanatool.com 317
7-1
EN8447-2
sheAr rAbbetinG E N8
Grooving Cutterhead bodies available in hard wearing aluminum or steel, complete with
shear angle tungsten carbide knives and scorer. Suitable for producing various
thickness rabbets in softwood, hardwood and man-made boards (with or without
coating) on a spindle molder. Shear angle reduces tear out and improves quality
Rabbeting of cut.
Planing
B
Profiling d
D
ØD B Teeth Ød Max. t RPM Repl. T.C.Knife Tool No.
Jointing
125mm(5) 30mm(1-3/16) 2+4 1-1/4 27mm(1-1/16) 6,100-10,300 RCK-30 RCK-70 61480
125mm(5) 50mm(2) 4+4 1-1/4 27mm(1-1/16) 6,100-10,300 ICK-50 RCK-70 61482
125mm(5) 60mm(2-3/8) 2+4 1-1/4 27mm(1-1/16) 6,100-10,300 ICK-60 RCK-70 61484 *
150mm(5-7/8) 60mm(2-3/8) 2+4 1-1/4 40mm(1-1/2) 5,200-8,600 ICK-60 RCK-70 61485 *
* Aluminum
Door
Making
Lamello® 7-1
EN8447-2
rAbbetinG EN8
Cutterhead bodies available in hard wearing aluminum or steel, complete with
tungsten carbide knives and scorer for improved finish. Suitable for producing
Profile Pro™ various thickness rabbets in softwood, hardwood and man-made boards (with or
without coating) on a spindle molder.
Accessories
Insert Shaper Cutters
d
D
ØD B Teeth Ød Max. t RPM Repl. T.C.Knife Tool No.
85mm(3-3/8) 50mm(2) 2+4 1-1/4 8mm(5/16) 9,000-15,000 RCK-50 RCK-70 61463
90mm(3-9/16) 40mm(1-1/2) 2+4 1-1/4 15mm(19/32) 8,500-12,000 RCK-40 RCK-70 61464 *
100mm(4) 30mm(1-3/16) 2+4 1-1/4 20mm(7/8) 7,600-12,900 RCK-30 RCK-70 61460 *
100mm(4) 50mm(2) 2+4 1-1/4 20mm(7/8) 7,600-12,900 RCK-50 RCK-70 61462 *
125mm(5) 30mm(1-3/16) 2+4 1-1/4 30mm(1-3/16) 6,100-10,000 RCK-30 RCK-70 61470
125mm(5) 50mm(2) 2+4 1-1/4 30mm(1-3/16) 6,100-10,000 RCK-50 RCK-70 61472
Industrial Quality
125mm(5) 50mm(2) 2+4 1-1/4 30mm(1-3/16) 6,100-10,000 RCK-50 RCK-70 61465 *
125mm(5) 60mm(2-3/8) 2+4 1-1/4 30mm(1-3/16) 6,100-10,000 ICK-60 RCK-70 61467
*Aluminum
318 3D renderings & tool illustrations not shown at actual size. Visit our website for 1:1 profiles.
Grooving
Rabbeting
Planing
Profiling
Jointing
sPirAl PlAner/jointinG
ALU
Hard wearing aluminum body complete with spiral positioned tungsten carbide knives. Suitable for planing and jointing in softwood,
hardwood and man-made boards on a spindle molder. Can be used with a bearing guide and ring fence for planing and routing
curved work pieces with a template.
Door
Making
Lamello®
d
Profile Pro™
D
Accessories
ØD B Teeth Ød RPM Repl. T.C.Knife Rub Collar Tool No.
61292
Insert Shaper Cutters
62mm(2-1/2) 80mm(3-1/8) 12 1-1/4 8,000-12,000 RCK-70 61596
Industrial Quality
Replacement screw #67154.
sAndinG drum
For sanding rough workpieces using a bottom
template and rub collar with ball bearing.
d
D
ØD B Ød RPM Abrasive Replacement Rub Collar Tool No.
60mm(2-3/8) 100mm(4) 1-1/4 4,500 AB61293 61596 61293
Replacement Abrasive Material = AB61293 (9"x3") 80 Grit Paper
3D renderings & tool illustrations not shown at actual size. Visit our website for 1:1 profiles. www.amanatool.com 319
7-1
EN8447-2
AdjustAble chAmfer E N8
Grooving Cutterhead bodies available in hard wearing aluminum or steel, complete with tungsten
carbide knives. Suitable for producing chamfer cuts at various angles in softwood,
hardwood and man-made boards on a spindle molder. Cutting angle can be adjusted
in 7.5° increments by using notched scale. Fine adjustment of 1° is also possible.
Rabbeting
Planing
d
D
ØD B a° Ød RPM Repl. T.C.Knife Tool No.
Profiling 110mm(4-11/32) 40mm(1-1/2) -45.0° to +45.0° 1-1/4 7,000-9,000 RCK-40 61303
120mm(4-3/4) 40mm(1-1/2) -45.0° to +45.0° 1-1/4 6,000-8,500 RCK-40 61304 *
130mm(5-1/8) 50mm(2) -67.5° to +67.5° 1-1/4 5,000-8,500 ICK-50 61306
150mm(5-7/8) 50mm(2) -90.0° to +90.0° 1-1/4 5,100-7,400 ICK-50 61307
Jointing
160mm(6-1/4) 50mm(2) -90.0° to +90.0° 1-1/4 4,800-6,000 ICK-50 61310 †*
*Aluminum
† Tool has special mechanism to enable fine tuning angle of 1˚
Door multi Profile cutter
Making Aluminum alloy heads with special multi-radii replaceable carbide knives. A very
versatile cutter for moldings such as beads, corner rounds, classical or a
combination of each. Multiple passes and depth settings will give even further
combinations. Two different sizes available. Standard bore is 1-1/4". Includes
3mm T-Handle hex key.
Lamello®
R 6mm R 4.8mm
R 7mm
40mm
R 4.5mm
50mm
R 8mm R 7mm
Profile Pro ™
B
R 10mm
d 7˚
16mm
D
Accessories 25mm
Insert Shaper Cutters
ØD B d RPM Repl. T.C. Knife Tool No.
120mm(4-3/4) 40mm(1-1/2) 1-1/4 6,400-10,000 RCK-84 61276
160mm(6-1/4) 50mm(2) 1-1/4 4,800-8,000 RCK-86 61280
7-1
EN8447-2
45˚ lock miter
STL
EN8
This tool features a solid-steel cutterhead, complete with two tungsten carbide knives.
Suitable for producing 45° lock miter joints in softwood, hardwood and man-made
boards on a spindle molder. Can also be used for jointing horizontal pieces of timber.
90°
d 9
B
Industrial Quality
9 14-28
21.5 45°
D
ØD B d RPM Repl. T.C. Knife Tool No.
170mm(6-11/16) 40mm(1-1/2) 1-1/4 5,500-10,000 RCK-90 61290
320 3D renderings & tool illustrations not shown at actual size. Visit our website for 1:1 profiles.
AdjustAble STL
lock miter Grooving
This tool cuts the 45° lock miter and other angles as well. It’s the ideal cutter for
joining polygon shapes, such as hexagons (6-sided) and octagons (8-sided). The
cutter has a solid steel body with replaceable carbide knives. An exclusive
adjustment system is used that features positive stops at 7.5° increments for
precise indexing of angles. Rabbeting
d
B
Planing
D
Profiling
ØD B a° Ød Max. RPM Repl. T.C.Knife Tool No.
Jointing
170mm(6-11/16) 40mm(1-1/2) -45° to +45 1-1/4 6,000 RCK-90 61298
Door
Making
Lamello®
finGer joint
STL
This stackable finger-jointing tool is an open-design cutter with no limitation on
chip size. As such, it’s a high-production, high-performance tool to be used only Profile Pro™
with an automatic or power feed. The tool features a 3-wing solid-steel
cutterhead that takes replaceable carbide knives. Each cutter will cut up to
40mm high and 10mm deep. Stack two or more cutterheads on the spindle to
increase the cut height capacity.
Accessories
Insert Shaper Cutters
Industrial Quality
B
d D
t
ØD B Ød Max. t RPM Repl. T.C.Knife Tool No.
170mm(6-11/16) 40mm(1-1/2) 1-1/4 10mm(13/32) 7,000 RCK-92 61270
3D renderings & tool illustrations not shown at actual size. Visit our website for 1:1 profiles. www.amanatool.com 321
‘v’ tyPe ALU
7-1
EN8447-2
Grooving
Glue joint E N8
Cutterhead bodies in hard wearing aluminum, complete with tungsten carbide
knives. Suitable for producing glue joints in softwood, hardwood and man-made
boards on a spindle molder.
Rabbeting
2.8mm
5mm
Planing
Profiling
d
D
Jointing
ØD B Ød RPM Repl. T.C. Knife Tool No.
90mm(3-1/2) 50mm(2) 1-1/4 8,500-12,000 RCK-72 61296
120mm(4-3/4) 50mm(2) 1-1/4 6,100-10,000 RCK-72 61297
Door
Making
7-1
EN8447-2
Glue joint EN8
Cutterhead bodies in hard wearing steel and aluminum complete
with tungsten carbide knives. Suitable for producing ‘finger style’
Lamello ®
reversible glue joints in softwood, hardwood and man-made
boards on a spindle molder.
Profile Pro™
A B
Accessories d
D
Insert Shaper Cutters
60 max. 49.6 max.4 60 max.
8 16 16
30° 30° 30°
4.7 4.7 4.7
Profile 1 Profile 2 Profile 3
RCK-83 2.7 RCK-85 2.7 RCK-87 2.7
Industrial Quality
ØD B Profile A Ød RPM Repl. T.C.Knife Tool No.
120mm(4-3/4) 60mm(2-3/8) 1 7.7mm(5/16) 1-1/4 6,500-9,500 RCK-83 61258 *
130mm(5-1/8) 60mm(2-3/8) 3 23mm(15/16) 1-1/4 5,400-8,800 RCK-87 61268 *
140mm(5-1/2) 50mm(2) 2 15.4mm(5/8) 1-1/4 5,400-8,800 RCK-85 61264
* Aluminum
322 3D renderings & tool illustrations not shown at actual size. Visit our website for 1:1 profiles.
lAmello® STL
7-1
EN8447-2
biscuit joint
E N8
Grooving
Hard wearing steel body complete with tungsten carbide knives and scorers.
Suitable for producing grooves and slots in softwood, hardwood and man-made
boards for biscuit jointing. For use with most biscuit jointing machines.
Rabbeting
B
d Planing
D
Profiling
ØD B Teeth Ød RPM Repl. T.C. Knife Tool No.
100mm(4) 4mm(5/32) 2+2 7/8 7,700-15,000 RCK-18 RCK-71 61450
100mm(4) 4mm(5/32) 4+4 7/8 7,700-15,000 RCK-18 RCK-71 61452 Jointing
Door
Making
rAised PAnel ALU
7-1
EN8447-2
& bAckcutter EN8
Lamello®
Cutterhead in hard wearing aluminum, complete with tungsten carbide knives.
Suitable for producing raised panel profiles in softwood, hardwood and
man-made boards on a spindle molder.
Profile Pro™
t
B
Accessories
d
D
Insert Shaper Cutters
Industrial Quality
#61262
R6
3
20.5 9.5
R40 #61599
R40 #61262 With Back Cutter #61265
57 Bearing
and Bearing #61599
#61265
Type ØD R B Ød Max. t RPM Repl. T.C. Knife Rub Collar Tool No.
Raised Panel 180mm(7-1/16) — 25mm(1) 1-1/4 57(2-1/4) 4,500-7,500 RCK-78 61599 61262
Back Cutter 104mm(4-3/32) 5/16 18mm(23/32) 1-1/4 — 7,600-10,000 RCK-132 — 61265
3D renderings & tool illustrations not shown at actual size. Visit our website for 1:1 profiles. www.amanatool.com 323
7-1
ALU EN8447-2
rAised PAnel E N8
Grooving Cutterheads in hard wearing aluminum, complete with two tungsten carbide
knives and two scribes. Suitable for producing various raised panel profiles in
softwood, hardwood and man-made boards. Raising or lowering the cutterhead
on the spindle molder produces different profiles.
Rabbeting
B
Planing
d
D
Profiling
52
Jointing 8.8 max. R6 61241 61242
R6
11
3.5 5
RCK-82 NCK-40 3°
Door
Making 63
R6 Back Cutter #61265 fits
#61265
#61241 & #61242.
25 max. R40
4
Lamello ® 8
RCK-242 R20 NCK-50
Type ØD R B Ød Max. t RPM Teeth Repl. T.C. Knife Tool No.
Profile Pro™
Raised Panel 200mm(7-7/8) — 20mm(7/8) 1-1/4 52mm(2-1/16) 3,800-6,500 2+2 RCK-82 NCK-40 61241
Raised Panel 200mm(7-7/8) — 24mm(15/16) 1-1/4 63mm(2-1/2) 3,800-6,500 2+2 RCK-242 NCK-50 61242
Back Cutter 104mm(4-3/32) 5/16 18mm(23/32) 1-1/4 — 7,600-10,000 — — 61265
Accessories 7-1
rAised PAnel
ALU EN8447-2
EN8
Insert Shaper Cutters
Three different carbide knife profiles for raised panels are available for this
aluminum alloy cutterhead. Knives have two cutting edges each. In the standard
package, the traditional profile knives (#RCK-42) are furnished with the
cutterhead. Only a regular flat-blade screwdriver is required to change knives.
To cut the ogee or cove profiles, order the cutterhead and the desired knives
45582
separately.
D
d
B
Back Cutter #61265
t fits #61260. #61265
50 50 50
R5
R5
20 20 R40 20 R20
R5 R40
Industrial Quality
3° 3° 3°
RCK-42 RCK-44 RCK-46
Type ØD R B Ød Max. t RPM Teeth Repl. T.C. Knife Tool No.
Raised Panel 160mm(6-1/4) — 22mm(7/8) 1-1/4 50mm(2) 4,800-8,000 2+2 — 61260 *
Back Cutter 104mm(4-3/32) 5/16 18mm(23/32) 1-1/4 — 7,600-10,000 — RCK-132 61265
* RCK-42 included. Replacement knives sold separately.
324 3D renderings & tool illustrations not shown at actual size. Visit our website for 1:1 profiles.
7-1
ALU EN8447-2
EN8
Cutterhead in hard wearing aluminum alloy with one-sided reversible tungsten
carbide knives, utilizing the same knives for both stile and rail cuts by simply
adjusting the spindle height of your shaper. Same tool body accepts all four
different profiles. 3mm T-handle hex key included. To change profiles order
individual knives separately. All patterns are designed for 7/8" through 1" thick
materials.
B
3 max. 1
R6 R6
R4 R4
8 2 14 d
27 27 D
max. 3 max. 1
5 1.5 5
11.8 11.8
RCK-60 RCK-64
3 max. R6 4.26 max.
R6 8 26.5° 14
27 27 4.26
max. 3 max.
5 5
Insert Shaper Cutters
Industrial Quality
11.8 11.8
RCK-62 RCK-66
ØD B Teeth Ød Max. t RPM Repl. T.C.Knife Tool No.
120mm(4-3/4) 40mm(1-1/2) 2 1-1/4 11.8mm(15/32) 6,400-8,400 RCK-60
120mm(4-3/4) 40mm(1-1/2) 2 1-1/4 11.8mm(15/32) 6,400-8,400 RCK-64
120mm(4-3/4) 40mm(1-1/2) 2 1-1/4 11.8mm(15/32) 6,400-8,400 RCK-62
120mm(4-3/4) 40mm(1-1/2) 2 1-1/4 11.8mm(15/32) 6,400-8,400 RCK-66
Optional replacement bearing #61609 (98mm x 1-1/4 x 15mm).
3D renderings & tool illustrations shown at actual size. Visit our website for 1:1 profiles. www.amanatool.com
Grooving
Rabbeting
Planing
Profiling
Jointing
AdjustAble tonGue & Groove set
STL
The perfect fix for undersized plywood flat panel “Mission Style, Arts & Crafts and
Door Shaker” cabinet doors.
Making
Set includes unique adjustment system and a gauge for precise settings.
• Designed to cut precise grooves to provide undersized
plywood veneered panels with a snug, rattle-free fit.
• For 5.5mm undersized 1/4" plywood.
Lamello® • For 5.9mm oversized 1/4" veneered plywood.
• Adjust the panel groove width 3/16" to 5/16".
• Cut frame stock from 5/8" through 1-3/16" in thickness.
Profile Pro™
ØD ØD1 T C B Ød RPM Repl. T.C. Knife Rub Collar Tool No.
4 3-1/4 4.7 to 7.9mm (3/16 to 5/16) 3/8 1-3/16 1-1/4 12,900 RCK-236 RCK-238 C-033 61218
Accessories Replacement knives RCK-236 & RCK-238 consist of one pair each.
Insert Shaper Cutters
Adjustable Screw
d
Max D1 D
Min
Adjust the panel groove width 3/16" to 5/16" Adjustment Gauge
See Pages 130-132 for C
Industrial Quality
Instile & Rail System™
Adjustable Tongue & Groove
Router Bit Sets.
T B
See Page 296 for
Instile & Rail System™
Adjustable Tongue & Groove
Shaper Cutters Sets.
326 3D renderings & tool illustrations not shown at actual size. Visit our website for 1:1 profiles.
P R O F I L E P R O™
SHAPER CUTTERS Grooving
Rabbeting
Planing
Profiling
Jointing
Door
Making
Note: Machine safety guards have been removed for photo clarity.
the Profile Pro™ universAl shAPer
cutter system from AmAnA tool.® Lamello®
Designed for professionals, the Profile Pro features over 135 different
™
interchangeable steel knife patterns, ranging from molding to joinery to door
sets, which can all be used with a single cutterhead. Blank (unground) knives
are also available for custom patterns.
Profile Pro™
The Profile Pro™ features a unique system of fixed steel pins (A), screws (B) and
a wedge block (C) that simultaneously indexes and secures the knives (D) to the Above: Aluminum-Alloy
head (E). This enables fast, accurate set-ups and eliminates the tedious task of Profile Pro™ Shaper Head
adjusting the knives. This type of system also offers greater safety over other
types of cutterheads. Accessories
The Profile Pro™ cutterheads are 100mm, 110mm and 120mm black-oxide
Insert Shaper Cutters
Industrial Quality
finished solid steel or 68mm, 88mm, 100mm and 120mm anodized lightweight
aluminum alloy. The steel cutterheads are recommended for heavy-duty type
shapers with 3 horsepower or more. The aluminum heads, which are 60% less
weight than their steel counterparts, are recommended for all spindle shapers,
especially smaller machines with 2 horsepower or less.
When selecting the diameter, choose a cutterhead that will properly fit within
the table insert rings of your shaper. The diameters shown are for the head only,
so you must add from 14mm to 38mm to the diameter to allow for the knives.
(Example: Cutterhead #61100 or SCS-1000 (88mm) with #64F000 straight Above: Solid Steel
knives (add 14mm) = 102mm total outside diameter.) Profile Pro™ Shaper Head
B C
10 PoPulAr Profiles
D
E
now AvAilAble cArbide tiPPed A
See Pages 330-331.
3D renderings & tool illustrations not shown at actual size. Visit our website for 1:1 profiles. www.amanatool.com 327
Profile Pro™ Multi-ShaPer
Starter SetS
Grooving All sets include the basic 68mm or 88mm diameter aluminum alloy cutterhead
and seven pairs of interchangeable profile knives. Also included is a custom
hardwood storage box, hex key and color poster showing many of the different
available knife profiles. Look over the following pages for a full line of aluminum
Rabbeting and steel cutterheads in 3/4," 1," 1-1/4" and 30mm bores, a wide array of
additional knives, T-bushings for 1/2" and 3/4" diameter arbors, and empty
hardwood storage boxes.
ØD B Ød RPM Ideal/max. Set No.
Planing
68mm(2-11/16) 40mm(1-1/2) 3/4 to 1/2 7,000/9,000 SCS-1106*
88mm(3-1/2) 40mm(1-1/2) 1 7,000/9,000 SCS-1000
88mm(3-1/2) 40mm(1-1/2) 30mm 7,000/9,000 SCS-1002
Profiling 88mm(3-1/2) 40mm(1-1/2) 1-1/4 7,000/9,000 SCS-1004
ØD B Ød RPM Ideal/max. Set No.
Jointing 68mm(2-11/16) 40mm(1-1/2) 3/4 to 1/2 7,000/9,000 SCS-1108*
88mm(3-1/2) 40mm(1-1/2) 30mm 7,000/9,000 SCS-1100
88mm(3-1/2) 40mm(1-1/2) 1 7,000/9,000 SCS-1102
88mm(3-1/2) 40mm(1-1/2) 1-1/4 7,000/9,000 SCS-1104
* Includes 2 bushings (#BU-561) 3/4" to 1/2."
Door
Making B
Replacement Parts:
Description Size Qty. Required Tool No.
d
Wedge Blocks For 40mm Knives 2 WB-40
D Allen Socket Knife Screws 8x16mm 2 67144
Lamello® ‘L’ Shaped Allen Key 4mm 1 5010
Wood Storage Box For 6 Pair Of Knives 1 62282
Bushing 3/4" to 1/2" 2 BU-561
Knife Set Pins — 4 67153
Profile Pro™
Accessories
Insert Shaper Cutters
The following 40mm knives are included in each set:
SCS-1000/1002/1004/1106
64F000 64F001 64F002 64F003 64F004 64F005 64F006
SCS-1100/1102/1104/1108
B
Industrial Quality
64F000 64F001 64F016† 64F017† 64F096 64F098 64F099
† Part #’s 64F016 and 64F017 available carbide tipped, see page 331 for more information.
Knives shown at approx. 50% of actual size. See pages 331–332 for larger selection of knives.
328 3D renderings & tool illustrations not shown at actual size. Visit our website for 1:1 profiles.
Profile Pro™ ShaPer cutterS
aluMiNuM cutterheaDS Grooving
(For 40mm Knife System)
Profile Pro™ red anodized aluminum alloy cutterheads in 68mm, 88mm, 100mm
or 120mm diameters.
Rabbeting
ØD B Ød RPM Ideal/max. Set No.
68mm 40mm(1-1/2) 3/4 7,000/9,000 61068*
88mm(3-1/2) 40mm(1-1/2) 30mm 7,000/9,000 61100
88mm(3-1/2) 40mm(1-1/2) 1 7,000/9,000 61102
Planing
88mm(3-1/2) 40mm(1-1/2) 1-1/4 7,000/9,000 61104
100mm(4) 40mm(1-1/2) 1 5,800/9,000 61200
100mm(4) 40mm(1-1/2) 30mm 5,800/9,000 61204 B
100mm(4) 40mm(1-1/2) 1-1/4 5,800/9,000 61208 Profiling
120mm(4-3/4) 40mm(1-1/2) 1 5,100/7,900 61228
120mm(4-3/4) 40mm(1-1/2) 30mm 5,100/7,900 61232
d
120mm(4-3/4) 40mm(1-1/2) 1-1/4 5,100/7,900 61236
D
See page 333 for reducing ‘T’ bushings. Jointing
* Includes 2 Bushings (BU-561) 3/4" to 1/2."
ØD B Ød RPM Ideal/max. Set No.
120mm 50mm 1-1/4 4,500/6,600 61237 + Door
+ Warning!: Fits only blank knives 5.5mm thick #65RM127 and #HSSRM127 Making
found on page 331.
Lamello®
Steel cutterheaDS
(For 40mm Knife System)
Profile Pro™
Profile Pro™ black oxide solid steel cutterheads in 100mm or 120mm diameters.
ØD B Ød RPM Ideal/max. Set No.
100mm(4) 40mm(1-1/2) 1 5,800/9,000 61212
100mm(4) 40mm(1-1/2) 30mm 5,800/9,000 61216 Accessories
100mm(4) 40mm(1-1/2) 1-1/4 5,800/9,000 61220
Insert Shaper Cutters
Industrial Quality
120mm(4-3/4) 40mm(1-1/2) 1 5,100/7,900 61240
120mm(4-3/4) 40mm(1-1/2) 30mm 5,100/7,900 61244
120mm(4-3/4) 40mm(1-1/2) 1-1/4 5,100/7,900 61248
Replacement Parts: B
Description Size Qty. Required Tool No.
Allen Socket Screws 8x16mm 2 67144
Wedge Blocks For 40mm Knives 2 WB-40 d
‘L’ Shaped Allen Key 4mm 1 5010 D
Knife Set Pins 4 67153
See page 333 for reducing ‘T’ bushings.
3D renderings & tool illustrations not shown at actual size. Visit our website for 1:1 profiles. www.amanatool.com 329
Steel cutterheaDS
(For 60mm Knife System)
Grooving
Profile Pro™ black oxide solid steel cutterhead.
ØD B Ød RPM Ideal/max. Set No.
110mm(4) 60mm(2-3/8) 1-1/4 4,200/6,000 61249
Rabbeting
Blank unground knife may be found below.
Profile knives may be found on bottom of page 331.
Planing
40MM Steel KNiVeS
10 Popular Profiles Now Available Carbide Tipped*
Profiling R7 R8
R10 R5
5° R5
R12
22° R6 R8 R12 R5
64F000 64F001 64F002 64F003 64F004 64F005 64F006
Jointing
R5
R20 R6
R15 R10 R10 6mm
R40
R20 R10
64F008 64F009 64F011 64F013 64F014 64F015 64F016/*CT016
R6 R7
Door R3
R3.5
R5
R3.5 R3R5 R7
R8 R4
Making 6mm R12 R3
R5
R5
R5 R10 R8
R7
64F017/*CT017 64F018 64F019 64F020 64F021 64F022 64F024
R5 R5 R2.5
R5 R8 R6 R6 R3
12° R5 R3
Lamello ®
R5 R8 R5 R5 R5
R5
64F025 64F027 64F028 64F029 64F030 64F031 64F033
R2.5 R7.5 R4 R6 R6
R6 R4 R6 R6
Profile Pro ™ 86° 86°
R5 R15 R15 R10
R6.5 15°
64F034 64F035 64F036 64F038 64F043 64F044 64F045
R10 R6 R5 R8 R15 R8
R12
Accessories R10 R10 R8
R8 R5 R6
R8 R10
Insert Shaper Cutters
64F049 64F051 64F052 64F054 64F057 64F058 64F059
45° 45°
R15 4mm 4mm
R15 4mm 4mm 5.7mm
4mm
4mm
45° 45°
64F065 64F066/*CT066 64F071 64F072 64F075 64F076 64F077
48° R3 45° 45° R6
R35 R8
R4 5mm 5mm R40 R8 R5
R5 R12
48° R4 R4
64F080 64F081 64F083/*CT083 64F084/*CT084 64F087 64F089 64F090/*CT090
R6.5 R8 R8 R7
R7
4.4mm
10mm 8mm 8mm R6.5 4.4mm
10mm R8 R7
R8 R7
64F091/*CT091 64F092/*CT092 64F094 64F095 64F096 64F097 64F098
R7 R15 R3
R7 R20 R3 R3 R3 R3
R4 R23 R4
Industrial Quality
8mm R14 R14
R7 R4 R10 R4 R4
R7 R4 5° R6 R3 R4 R7 45°
64F099 64F100/*CT100 64F101 64F102 64F103 64F105 64F107
* Part #’s beginning with “CT” and marked in red are carbide tipped.
More Profiles Available On Our Website Note: Each part # consists of one pair. See page 331 for blank (unground) knives.
R
www.amanatool.com Specifications shown (‘R8’, ‘R10’ etc.) are in millimeters.
330
M
3D renderings & tool illustrations not shown at actual size. Visit our website for 1:1 profiles.
40MM Steel KNiVeS (Cont.)
10 Popular Profiles Now Available Carbide Tipped*
Grooving
R2.5
45° R11 R15
R6
R20 R11 R4 R13.5 R3
R6 R13.5 R3
R4
64F109 64F111 64F112 64F117 64F118 64F119/*CT119 64F121 Rabbeting
R2.5
R3 45°
R6 R8 R10 R12
R3 R15
R3 45°
R6 R8 R10 R12 R15
64F122 64F127 64F173 64F174 64F175 64F176 64F177 Planing
* Part #’s beginning with “CT” and marked in red are carbide tipped.
Note: Each part # consists of one pair. See below for blank (unground) knives.
Profiling
Specifications shown (‘R8’, ‘R10’ etc.) are in millimeters.
+60MM Steel KNiVeS Jointing
(Limiters Included)
R6 R6
R10 R8
R10 R6 R25 Door
R12 R8 Making
60°
66F001 66F002 66F003 66F005 66F006
R25 R8 R20
R25
R8
R25 R25 R15 R20 Lamello®
R20
66F007 66F008 66F009 66F010 66F011 66F012
Note: Each part # consists of one pair. See page 330 for blank (unground) knives. Profile Pro™
Specifications shown (‘R8’, ‘R10’ etc.) are in millimeters.
4mm
Accessories
6mm
BlaNK (uNGrouND) KNiVeS
Insert Shaper Cutters
Industrial Quality
40mm 24mm 11mm
For Custom Grinding
6mm
* Warning!: Fits only on special cutter head #61237, page 329.
** Fits only on special cutter head #61249 44.75mm
64RM193
18mm Maximum Profile Depth
4mm
4mm 5.5mm
6mm
6mm 6mm
60mm 34mm 11mm
50mm 24mm 11mm 50mm 24mm 11mm
6mm 6mm 6mm
46mm 44mm 53mm
64RM599 66RM600** 65RM127*
20mm Maximum Profile Depth 29mm Maximum Profile Depth *HSSRM127 (High Speed Steel)
27mm Maximum Profile Depth
3D renderings & tool illustrations not shown at actual size. Visit our website for 1:1 profiles. www.amanatool.com 331
Ball BeariNG ruB collarS
For Shaper Cutters
Grooving
For 1/2," 3/4" & 1-1/4" Diameter Spindles
Designed for template shaping such as arched or cathedral doors, etc. Features
a ball bearing center with a steel sleeve and is available with either 1/2," 3/4"
B d and 1-1/4" inside diameter. Please see page 333 for additional rub collars.
Rabbeting
D
Use for Amana Tool® No. Ød ØD B Tool No.
SC600 1/2 0.874 (7/8) 5/32 C-001
1/2 1.125 (1-1/8) 5/16 47800 *
Planing SC602, SC604, SC606 1/2 1.250 (1-1/4) 5/32 C-002
1/2 1.374 (1-3/8) 5/32 C-003
993 1/2 1.500 (1-1/2) 5/16 47806 *
939, SC624, SC642 3/4 1.457 9.5mm C-043
Profiling
977 3/4 1.500 (1-1/2) 9.5mm C-044
905, 950, 906, 929, 930, SC626, SC636, SC638, SC650, SC652, SC654, SC656, SC658 3/4 1.625 (1-5/8) 7/16 C-005
SC586, SC587, SC588, SC589 3/4 42mm (1-21/32) 9mm 47757
957 3/4 1.687 (1-11/16) 7/16 47810 *
Jointing
900, 901, 968, 969, 980, 998, 991, SC410, SC412 SC414, SC416, SC630, SC640, SC646 3/4 1.750 (1-3/4) 7/16 C-006
965, SC442, SC444, SC446, SC582, SC592 3/4 1.811 7/16 C-007
921, 922, 927, 928, 932, 938, 940, 945, 952, 958, 994, SC554, SC558, SC590, SC634, SC648 3/4 1.874 (1-7/8) 7/16 C-008
964, SC400, SC402, SC404, SC406,SC408 3/4 1.937 (1-15/16) 7/16 C-004
SC440, SC460 3/4 1.964 7/16 C-009
Door 902, 903, 904, 951, 966, SC442, SC644, SC446 3/4 2.000 7/16 C-010
Making 922 3/4 2.063 7/16 C-022
SC585 3/4 2.031 (2-1/32) 7/16 C-039
992 3/4 2.106 7/16 C-023
905, 925, 926, 959, 999, SC618, SC640 3/4 2.125 (2-1/8) 7/16 C-011
975, 976 3/4 2.153 7/16 C-024
Lamello® 3/4 2.187 (2-3/16) 7/16 47820 *
SC444 3/4 2.216 7/16 C-012
972, 974, SC628 3/4 2.250 (2-1/4) 7/16 C-025
3/4 2.272 7/16 C-013
Profile Pro™ 933, SC616, SC441 3/4 2.295 7/16 C-014
911 3/4 2.311 7/16 C-026
960, 961, 971, 973, SC620, SC622 3/4 2.375 (2-3/8) 7/16 C-015
962 3/4 2.425 7/16 C-027
960, 961 3/4 2.468 7/16 C-028
Accessories 940, 945, 986-VC, 985-VC, 994 3/4 2.500 (2-1/2) 7/16 C-016
934, 935, 936, 937 3/4 2.555 7/16 C-029
Insert Shaper Cutters
984-VC, 987-VC, SC430, SC432 3/4 2.625 (2-5/8) 7/16 47822 *
967 3/4 2.733 7/16 C-030
989 1-1/4 1.850 9mm C-045
SC532, SC534, SC536 1-1/4 2.000 9mm C-050
SC680, SC682 1-1/4 2.165 1/2 C-051
SC593 1-1/4 2.312 (2-5/16) 1/2 C-040
924 1-1/4 2.375 (2-3/8) 1/2 C-041
931, 984, 985, 985-LH, 986, 987, A-30-114, A-30-116, A-30-118, A-30-120, 1-1/4 2.500 (2-1/2) 1/2 C-017
SC420, SC422, SC426, SC500, SC502, SC504, SC506, SC508, SC509, SC510, SC511, SC512,
SC514, SC516, SC520, SC522, SC524, SC526, SC528, SC530, SC556, SC559, SC580, SC617
SC584, SC594 1-1/4 2.531 1/2 C-018
SC424, SC540, SC542, SC544, SC546, SC548, SC550, SC560, SC562, SC564 1-1/4 2.688 1/2 C-019
SC542, SC546, SC548 1-1/4 2.874 (2-7/8) 1/2 C-020
A-28-108, A-29-108, A-30-110 1-1/4 3.000 1/2 C-032
SC540, SC544, SC550 1-1/4 3.090 1/2 C-021
SC462, SC666 1-1/4 3.185 1/2 C-049
C-033
Industrial Quality
A-28-106, A-29-106, A-30-108 1-1/4 3.250 (3-1/4) 1/2
A-28-104, A-29-104, A-30-104 1-1/4 3.500 (3-1/2) 1/2 C-035
A-32-100, A-32-200, A-32-400 1-1/4 3.555 1/2 C-036
A-28-102, A-29-102, A-30-102 1-1/4 3.625 (3-5/8) 1/2 C-037
A-28-100, A-29-100, A-30-100 1-1/4 3.750 (3-3/4) 1/2 C-038
*Includes 2 steel shims .007" (#55358); Rub collar shim (#55358)
332 3D renderings & tool illustrations not shown at actual size. Visit our website for 1:1 profiles.
Ball BeariNG ruB collarS
For 3/4," 1," 1-1/4" & 30mm Spindle Shapers
Grooving
Designed for template shaping such as arched or cathedral doors, etc. Features
a steel ball bearing center and interchangeable, lightweight aluminum rub collar
sleeves. To order, specify rub collar (example: #61600, 75mm), and then order
the correct size bearing to fit your spindle. The bearing includes a special steel
retaining collar that properly secures the assembly to your spindle (3/4," 1," Rabbeting
1-1/4" or 30mm).
Order No. Order No. Collar With
Ball Bearing Inside
ØD B (Rub collar only) (Ball bearing Retainer
75mm 16mm 61600 Ød w/ retainer) Planing
61650 d
80mm 16mm 61602 1-1/4
85mm 16mm 61604 1 61652
B
90mm 16mm 61606 30mm 61654
95mm 16mm 61608 3/4 61656 D Profiling
100mm 16mm 61610
4 16mm 61615
103mm 15mm 61611 Order No.
Jointing
105mm 16mm 61612 Ød (retainer only)
110mm 16mm 61614 1-1/4 61670
115mm 16mm 61616 1 61672
120mm 16mm 61618 30mm 61674
125mm 16mm 61620 3/4 61676
130mm 16mm 61622 Note: Bearing only Door
140mm 16mm 61624 (1-1/4 x 2-1/2) order Making
150mm 16mm 61626 #61660 (no retainer).
160mm 16mm 61628
170mm 16mm 61630
DouBle ‘t’ BuShiNGS Lamello®
Ød ØD B Tool No.
1/2 3/4 1-5/16 BU-918
3/4 1 1-5/16 BU-916
3/4 1-1/4 1-5/16 BU-914 Profile Pro™
1 1-1/4 1-5/16 BU-912
loNG ‘t’ BuShiNGS
Ød ØD B Tool No. Accessories
1/2 3/4 1-5/16 BU-928
Insert Shaper Cutters
Industrial Quality
3/4 1 1-5/16 BU-926
3/4 1-1/4 1-5/16 BU-924
1 1-1/4 1-5/16 BU-922
ShaPer cutter ‘t’ BuShiNGS
(With Flange), 2 Required Per Cutter
Each item number consists of one of each.
Ød ØD A B C Tool No.
1/2 3/4 5mm 9mm 55mm BU-561
1/2 3/4 1/4 11/32 1 BU-550
1/2 1 5mm 9mm 55mm BU-565
C
3/4 1 5mm 9mm 55mm BU-564
3/4 30mm 5mm 9mm 55mm BU-562 B
A
3/4 1-1/4 5mm 9mm 55mm BU-570
3/4 1-1/4 1/4 15/32 1-3/4 BU-600 d
20mm 1-1/4 11/64 1/4 1-3/4 BU-724 D
1 1-1/4 3/16 9/32 1-3/4 BU-700
1 1-1/4 5mm 9mm 55mm BU-568
1 1-1/4 1/4 11/32 1-3/4 BU-720
1 1-1/4 11/32 1/2 1-3/4 BU-750
1 30mm 5mm 9mm 55mm BU-560
1-1/8 1-1/4 13/64 1/4 1-3/4 BU-722
30mm 1-1/4 5mm 9mm 55mm BU-566
3D renderings & tool illustrations not shown at actual size. Visit our website for 1:1 profiles. www.amanatool.com 333
B
SPacerS (Sleeve Bushings) For Shaper Cutters
For 1/2" Spindles
Grooving Ød ØD B Tool No.
1/2 3/4 .437 (7/16) BU-902
1/2 3/4 .500 (1/2) BU-900
1/2 3/4 .750 (3/4) BU-910
Rabbeting
1/2 3/4 1.620 (1/16) BU-920
1/2 3/4 1.250 (1-1/8) BU-930
d 1/2 1 .250 (1/4) 67220
D 1/2 1 .375 (3/8) 67221
Planing 1/2 1 .500 (1/2) 67222
1/2 1 .750 (3/4) 67223
1/2 1 1 67224
Profiling For 3/4" Spindles
3/4 1 .250 (1/4) 67230
3/4 1 .375 (3/8) 67243
Jointing 3/4 1 .437 (7/16) BU-904
3/4 1-1/4 .250 (1/4) 67225
3/4 1-1/4 .375 (3/8) 67226
3/4 1-1/4 .437 (7/16) BU-906
3/4 1-1/4 .500 (1/2) 67227
3/4 1-1/4 .750 (3/4) 67228
Door 3/4 1-1/4 1 67229
Making
3/4 1-1/2 .250 (1/4) 67241
3/4 1-5/8 .250 (1/4) 67242
3/4 1-7/8 .250 (1/4) 919
For 1" Spindles
Lamello®
1 1-1/4 .437 (7/16) BU-908
1 1-1/2 .250 (1/4) 67231
1 1-1/2 .375 (3/8) 67232
1 1-1/2 .500 (1/2) 67233
Profile Pro™
1 1-1/2 .750 (3/4) 67234
1 1-1/2 1 67235
For 1-1/4" Spindles
Accessories 30mm 1-1/4 .250 (1/4) 67244
30mm 1-1/4 .375 (3/8) 67245
Insert Shaper Cutters
30mm 1-1/4 .500 (1/2) 67246
30mm 1-1/4 .750 (3/4) 67247
30mm 1-1/4 1 67248
1-1/4 1-3/4 .250 (1/4) 67236
1-1/4 1-3/4 .375 (3/8) 67237
1-1/4 1-3/4 .500 (1/2) 67238
1-1/4 1-3/4 .750 (3/4) 67239
1-1/4 1-3/4 1 67240
B
8 Pc. ShiM SetS for ShaPer cutterS
Application: General purpose arbor shims used on assembly type tools that
require cutter adjustment. Particularly useful after tool re-sharpening.
d D Diameters 8 Pc set includes:
‘d’ Inside x ‘D’ Outside ‘B’ Shim Thickness Qty. Tool No.
67250
Industrial Quality
3/4 x 1-1/4 0.1mm (.0040) 1pc.
0.2mm (.0078) 2pc.
0.5mm (.0197) 1pc.
1.0mm (.0393) 4pc.
1-1/4 x 1-3/4 0.1mm (.0040) 1pc. 67252
0.2mm (.0078) 2pc.
0.5mm (.0197) 1pc.
1.0mm (.0393) 4pc.
334 3D renderings & tool illustrations not shown at actual size. Visit our website for 1:1 profiles.
PLANER & JOINTER KNIVES a˚
T-1 High-Speed Steel (HSS) 18% Tungsten
New grade T-1 high-speed steel with 18% tungsten content. For comparison,
this steel is much harder than M-2 HSS which typically has 12% tungsten. W
Crafted on state-of-the-art equipment, each knife is ground, honed and
individually hand-hammered to exacting tolerances. Many standard sizes
available individually or in sets. Packaging: Bulk in flat tubes. L t
HSS PLANER & JOINTER
INDIVIDUAL KNIVES
T-1 High-Speed Steel (HSS) 18% Tungsten
Sold each.
L W t a˚ Tool No.
15 1 1/8 45˚ P 445
16 1 1/8 45˚ P 442
20 1 1/8 45˚ P 450
20 35mm 1/8 45˚ P 455
24 1 1/8 45˚ P 480
24 1-1/4 1/8 45˚ P 490
24 35mm 1/8 45˚ P 495
25 3/4 1/8 45˚ P 560
25 1 1/8 45˚ P 580
25 1-1/4 1/8 45˚ P 590
25 35mm 1/8 45˚ P 595
31 1 1/8 45˚ P 650
31 1-1/4 1/8 45˚ P 660
37 5/8 1/8 45˚ P 700
37 3/4 1/8 45˚ P 710
37 7/8 1/8 45˚ P 715
37 1 1/8 45˚ P 720
37 1-1/8 1/8 45˚ P 726
37 1-1/4 1/8 45˚ P 730
37 1-1/2 1/8 45˚ P 772
37 1-3/4 1/8 45˚ P 773
37 5/8 3/32 45˚ P 740
37 3/4 3/32 45˚ P 750
P 712
Planer/Jointer Knives
Industrial Quality
37 3/4 5/32 45˚
37 1 5/32 45˚ P 722
37 1-1/8 5/32 45˚ P 762
37 1-1/4 5/32 45˚ P 770
37 1-1/2 5/32 45˚ P 774
Metric Sizes
Sold each.
L W t a˚ Tool No.
10 30mm 1/8 45˚ P 432
37 30mm 3mm 45˚ P 727
37 30mm 1/8 45˚ P 725
37 35mm 1/8 45˚ P 735
400mm 30mm 3mm 45˚ P 724
400mm 35mm 3mm 45˚ P 732
500mm 35mm 3mm 45˚ P 734
37 35mm 4mm 45˚ P 736
1 meter 3/4 3mm 45˚ P 460
1 meter 35mm 3mm 45˚ P 458
www.amanatool.com 335
a˚
HSS PLANER & JOINTER KNIFE SETS
T-1 High-Speed Steel (HSS)
18% Tungsten
W
L W t a˚ Knives Per Set Tool No.
4 5/8 1/8 45˚ 3 P 100
4 3/4 1/8 45˚ 3 P 110
L t
4-3/8 5/8 1/8 45˚ 3 P 130
6 5/8 1/8 45˚ 3 P 150
6 5/8 1/8 45˚ 4 P 160
6 3/4 1/8 45˚ 3 P 165
6 7/8 1/8 45˚ 3 P 170
6-1/16 5/8 3/32 45˚ 3 P 190
6-1/8 5/8 1/8 45˚ 3 P 220
6-1/8 3/4 1/8 45˚ 3 P 230
8 5/8 1/16 45˚ 4 P 250
8 5/8 1/8 45˚ 3 P 270
8 3/4 1/16 45˚ 3 P 280
8 3/4 1/8 45˚ 3 P 290
8 3/4 1/8 45˚ 4 P 294
8 7/8 1/8 45˚ 3 P 300
8 1 1/8 45˚ 3 P 310
8-1/16 5/8 3/32 45˚ 3 P 340
12 5/8 1/8 45˚ 3 P 360
12 3/4 1/8 45˚ 3 P 370
12 7/8 1/8 45˚ 3 P 380
12 1 1/8 45˚ 3 P 390
12 1-1/4 1/8 45˚ 3 P 395
12-1/4 3/4 1/8 45˚ 3 P 410
12-1/4 1 1/8 45˚ 3 P 420
12-1/2 7/8 1/8 45˚ 3 P 430
12-1/2 11/16 1/8 45˚ 3 P 431
13-1/8 5/8 1/8 45˚ 3 P 434
13-1/8 11/16 5/32 45˚ 3 P 440
16-1/4 1-1/4 5/32 45˚ 3 P 443
18 1-1/4 5/32 45˚ 3 P 444
18-1/8 1-1/8 5/32 45˚ 3 P 446
18-1/4 1-1/4 5/32 45˚ 3 P 448
Planer/Jointer Knives
Metric Sizes
L W t a˚ Knives Per Set Tool No.
100mm 30mm 3mm 45˚ 4 P 120
130mm 30mm 3mm 45˚ 4 P 140
150mm 30mm 3mm 45˚ 4 P 180
180mm 30mm 3mm 45˚ 4 P 240
230mm 30mm 3mm 45˚ 4 P 345
Industrial Quality
336
PLANER & JOINTER KNIVES a˚
Solid Carbide
Ready to use: fully ground and honed solid carbide micro-grain planer & jointer
knives. All knives are bevel-edged, and are perfectly parallel and flat, with no W
mounting holes or slots. Mirror finish, ground from 600 grit diamond wheels.
Sold each.
L t
L W t a˚ Tool No.
4 5/8 1/8 45˚ PSC-100
4 3/4 1/8 45˚ PSC-110
6 5/8 1/8 45˚ PSC-120
6 3/4 1/8 45˚ PSC-130
8 5/8 1/8 45˚ PSC-140
8 3/4 1/8 45˚ PSC-150
12 3/4 1/8 45˚ PSC-160
12-1/2 3/4 .088 45˚ PSC-170 *
15 1 1/8 45˚ PSC-175
* Double-sided (reversible) knives for Delta 12-1/2" planer, mode; #540.
PLANER & JOINTER KNIVES a˚
Carbide Tipped
An economical alternative to solid carbide knives. Longer tool life than standard
HSS knives. W
L W t a˚ Tool No.
4 3/4 1/8 45˚ CTP-100 L t
6 5/8 1/8 45˚ CTP-110
6 3/4 1/8 45˚ CTP-120
8 5/8 1/8 45˚ CTP-130
8 3/4 1/8 45˚ CTP-140
12 3/4 1/8 45˚ CTP-150
15 3/4 1/8 45˚ CTP-160
15 1 1/8 45˚ CTP-170
20 1 1/8 45˚ CTP-200
PORTAbLE PLANER KNIVES
Solid Carbide W
Planer/Jointer Knives
Industrial Quality
Solid carbide reversible knives designed for many popular 3-1/4" machines. L
The ICK-100 (82mm) will fit many models by AEG, Bosch, Hitachi, Makita,
Metabo, Ryobi, Skil, etc.
The ICK-200 (82.7mm) will fit many models by Black & Decker.
Includes one pair of 2-sided (reversible) knives.
L W Thickness Tool No.
82mm (3-1/4) 5.5mm 1.12mm ICK-100
82.7mm (3-1/4) 5.5mm 1.12mm ICK-200
cORRUgATED bAcK mOULDER STEEL
M-2 High-Speed Steel (HSS) 60˚
Tool No. Tool No.
L W a˚ t = 1/4" t = 5/16"
25 1-1/4 45˚ CSK-100 CSK-300
a˚
25 1-1/2 45˚ CSK-110 CSK-310
25 1-3/4 45˚ CSK-120 CSK-320
25 2 45˚ CSK-130 CSK-330
25 2-1/4 45˚ CSK-140 CSK-340 W
25 2-1/2 45˚ CSK-150 CSK-350
25 2-3/4 45˚ CSK-160 CSK-360
25 3 45˚ CSK-170 CSK-370 L t
www.amanatool.com 337
DIcUT ™ LAmINATE cUTTER
Carbide-Tipped
Quality craftsmanship in your work requires the highest quality in hand tools.
Dicut™ is a precision cutting tool made with perfectly ground carbide edges for
fast, accurate cutting and scoring of laminates, plastics, Plexiglas® and other
materials. Tool features lightweight steel construction, special ‘safety-grip’
plastic coated handle, and carbide-tips that can be re-sharpened. Packaged in
a colorful, attractive clamshell.
Useful for precision cutting of: Formica,® plastic, and Plexiglas.®
Description Tool No.
Dicut™ Laminate Cutter 20003
E V E RY R
ORKE
WO DW OWN
O
SHOU L D
ONE!
20008 SWIVEL DE-bURRINg REAmER & ScRAPER
Solid Carbide
Excellent general purpose shop tools for scraping, hole de-burring, etc.
Both tools feature large ergonomically designed handles and solid carbide
replaceable blades.
Description Application Tool No.
Carbide Swivel De-Burring Reamer Laminate Trimming, “Safe-Edging”, 20006
Hole De-Burring
20006 Replacement Blade For Above — 20007
Carbide Hole Scraper General Purpose 20008
Replacement Blade For Above — 20009
Hand Tools & Shop Tools
mAgNETIc KNIFE SETTER
For Planers & Jointers
• Precise adjustments for leveling knives.
• Simple to use.
• Heavy duty magnets.
• Spring loaded magnetized ceramic stop.
• Works with size drums or knives.
• Includes wooden box with instructions.
Description Tool No.
Universal Knife Setter MKS-100
Industrial Quality
338
A
DT125T24-22 ........................................254 DT400T721-80 ..............................251, 252
DT125T24-45.............................251 to 254 DT420T721-60 to DT420T721-60A.......251
L
A-27-100 to A-27-116 ..........................270 DT125T24-45A..............................252, 254 DT430T720-30 ......................................253 LAM300T4 to LAM400T6 ......................258
A-28-100 to A-28-108 ..........................276 DT12720 to DT12721-30.......................246 DT430T721-30 to DT430T961-75 .........252 LB10801 to LB16121 ............................242
A-29-100 to A-29-108 ..........................275 DT12840 to DT12840-30.......................245 DT450T720-30 ......................................253 LB220T641....................................242, 244
A-30-100 to A-30-118 ..........................274 DT12841 to DT12841-30.......................247 DT450T721-30 ......................................252 LB86401................................................242
AB210 ...................................................156 DT12960 to DT12961-30.......................246 DT450T721-60 to DT450T721-75 .........251
AMA-10.................................................205 DT12962................................................235 DT450T721-80 to DT450T721-80A.......252 M
AMA-12.................................................203 DT14108-30 to DT14841-30 .................246 DT460T721-30 to DT480T801-30 .........252 MB10800 to MB16120 ..........................240
AMA-17.................................................204 DT14842................................................235 DT500T601-60A to DT500T721-60B ....251 MB220T420...................................240, 244
AMA-25 to AMA-50 ..............................205 DT150T24-20 to DT150T36...................254 DT500T721-75 to DT500T721-75A.......252 MB86400...............................................240
AMS-209 to AMS-210.............................52 DT160T36-45 ................................252, 254 DT500T721-75B to DT500T721-80A ....251 MDF-30 .................................................205
DT160T36-55.............................251 to 254 DT550T721-40 ......................................252 MFA-12 .................................................203
B DT175T28-45 to DT175T28-45A...........254 DT550T721-100B..........................251, 252 MFK-30 .................................................206
Bore – Dado – Bore-3 ..........................262 DT180T30-20 to DT180T30-45 .....251, 254 DT600T721-60 ......................................251 MKS-100 ...............................................338
BTG-100................................................199 DT180T30-45A......................................254 MR0100 to MR0114 ................................56
BTG-200................................................199 DT180T30-55 ................................252, 254 E MS10600 to MS15100 ..........................238
BU-100 to BU-530.................................261 DT200T36-20.............................252 to 254 EB-351 ..................................................215 MSB1080 to MSB1296-30 ....................241
BU-550 to BU-560.................................333 DT200T36-20A..............................252, 254 EZ100-24-22 to EZ125-24-22...............249
BU-561..........................................328, 333 DT200T36-30 ........................................254 EZA-08 to EZA-14 .................................249 N
BU-562..................................................333 DT200T36-45 ........................251, 253, 254
NC-820..................................................260
BU-564..........................................218, 333 DT200T36-45A to DT200T36-45B 251, 254
F NRC-A01 ...............................................139
BU-565 to BU-750.................................333 DT200T36-65 ........................251, 252, 254
FC-500 to FC-520 .................................260 NRC-A02 to NRC-A17 .....................82, 139
BU-900 to BU-910.................................334 DT200T36-65A......................251, 252, 254
FO-079 to FO-700 .................................226 NRC-A18 to NRC-A23 .............................82
BU-912 to BU-918.................................333 DT215T42-50 ................................252, 254
NRC-B51 to NRC-B55 .............................83
BU-920..................................................334
BU-922 to BU-928.................................333
DT220T640....................................244, 245
DT220T641....................................244, 251
G NS-102....................................................83
NS-106....................................................82
GP-420 ..................................................259
BU-930..................................................334 DT220T643....................................244, 247
DT300T48-30 to DT300T48-50 .............254
H P
C DT305T480-30 ......................................253
P 100 to P 431 ......................................336
DT305T481-30 ......................................251 HCK-15..................................................205
C-001 to C-051 .....................................332 P 432.....................................................335
DT305T600-30 ......................................253 HCK-17..................................................204
CO-100 to CO-254.................................202 P 434 to P 440 ......................................336
DT305T601-30 ......................................252 HCK-20 to HCK-25 ................................205
CO-300 to CO-336.................................201 P 442.....................................................335
DT305T601-75 ......................................251 HCK-30..................................................206
CSK-100 to CSK-370 ............................337 P 443 to P 444 ......................................336
DT305T721-80 ......................................252 HCK-34 to HCK-36 ................................204
CT016 to CT100 ....................................330 P 445.....................................................335
DT350T721-30 ......................................252 HCK-50..................................................206
CT119....................................................331 P 446 to P 448 ......................................336
DT355T540-30 to DT355T540-75 .........253 HCK-70..................................................203
CTC10963 to CTC12903-5/8 .................238 P 450 to P 774 ......................................335
DT355T541-30 to DT355T541-75 .........251 HG10480 to HG220T403........................239
CTP-100 to CTP-200 .............................337 PC-620 ..................................................260
DT355T720-30 to DT355T720-80 .........253 HG220T420 ...................................239, 244
PLC-100 ................................................222
D DT355T721-30 ..............................251, 252 HMA-12.................................................203
HMA-25.................................................205
PR1040 to PR1240................................228
DT355T721-60 to DT355T721-75 .........251
DP-300 to DP-304.................................219 PS-100 to PS-500 .................................222
DT355T721-80 ..............................251, 252 HO-112 to HO-136 ................................200
DRB-200 to DRB-224..............................16 PSC-100 to PSC-175.............................337
DT370T721-30 ......................................252 HRK-30 to HRK-50 ................................206
DRB-300-RH to DRB-304-LH..................58
HSS11001 to HSS11006..........................25
DRB-400 ...........................................34, 35
DT380T601-60 ......................................251
DT380T721-60A to DT380T721-80.......252
R
DSS-100 to DSS-103 ............................257
DT10601................................................246
DT400T600-30 to DT400T600-75 .........253 I RA1024 to RA1648................................244
DT400T601-30 ......................................252 RB-100 to RB-122 ................................199
ICK-15 to ICK-25...................................205
DT10720 to DT10720-30.......................245 RB1020 to RB1628................................229
DT400T601-75 to DT400T601-80 .........251 ICK-30 to ICK-35RH ..............................206
Index
DT10721................................................247 RC-1000 to RC-1006...............................35
DT400T720-60 to DT400T720-80 .........253 ICK-40...................................................203
DT10800 to DT10801-30.......................246 RC-1008 to RC-1014...............................41
DT400T721-2PH....................................252 ICK-50...................................................206
DT120T14 to DT120T14-20...................247 RC-1024....................................................9
DT400T721-30 ..............................251, 252 ICK-100 to ICK-200...............................337
DT120T20 to DT120T24 ........................248 RC-1025 to RC-1034...............................51
DT400T721-60 ......................................251
DT125T24......................................253, 254 RC-1040 to RC-1072...............................50
DT400T721-75 ......................................252
www.amanatool.com 339
RC-1075 to RC-1076...............................53 RCK-221................................................136 SC596............................................304, 305
RC-1080 to RC-1088.................................9 RCK-230 to RCK-260 ............................145 SC600....................................................272
900-999
RC-1100 to RC-1109...............................50 RCK-360 to RCK-426 ..............................53 SC602....................................................273 900 to 901.............................................284
RC-1122 to RC-1126...............................61 RCK-480 to RCK-486 ............................149 SC610 to SC615 ....................................270 903 to 904.............................................282
RC-1130................................................136 REZ100 to REZ125 ................................249 SC617....................................................282 905 ........................................................272
RC-1154 to RC-1166.................................9 RGB-200 ...............................................199 SC618....................................................287 906 ........................................................277
RC-1230..................................................33 RM-438 to RM-550 ...............................259 SC619....................................................283 911 ........................................................282
RC-2000............................................34, 35 SC620....................................................288 912 to 918.............................................270
RC-2062 to RC-2063...............................11 S SC621....................................................287 919 ........................................................334
RC-2080 to RC-2166...............................10 SC624....................................................276 921 ........................................................298
SC300....................................................283
RC-2180..................................................11 SC626 to SC628 ....................................278 922 ........................................................303
SC400....................................................311
RC-2250..................................................47 SC630....................................................280 923 ........................................................275
SC401....................................................308
RC-2252..................................................46 SC632....................................................270 924 ........................................................303
SC402....................................................311
RC-2257 to RC-2258...............................47 SC634....................................................273 925 ........................................................275
SC403....................................................310
RC-2300 to RC-2304...............................11 SC636....................................................274 926 ........................................................276
SC404....................................................311
RC-2350..................................................12 SC638....................................................287 927 ........................................................275
SC405....................................................310
RC-2370..................................................70 SC640 to SC642 ....................................292 928 ........................................................276
SC406....................................................311
RC-2380 to RC-2383...............................93 SC646 to SC648 ....................................277 929 ........................................................275
SC407....................................................310
RC-2400..................................................33 SC650 to SC654 ....................................306 930 ........................................................276
SC408....................................................312
RC-2450 to RC-2454.............................147 SC656....................................................307 931 ........................................................308
SC410 to SC416 ....................................272
RC-2470................................................139 SC658....................................................306 932 ........................................................274
SC420....................................................290
RC-2480 to RC-2486.............................148 SC660 to SC668 ....................................279 933 ........................................................283
SC422 to SC432 ....................................291
RC-3100 to RC-3200.................................9 SC671 to SC674 ....................................270 938 ........................................................292
SC440 to SC441 ....................................294
RC-3204 to RC-3307...............................10 SC680....................................................272 939 ........................................................281
SC442....................................................295
RC-4000 to RC-4006.............................145 SC682....................................................277 940 ........................................................300
SC444....................................................294
RC-4012 to RC-4014.............................144 SC690 to SC694 ....................................307 945 ........................................................302
SC445 to SC446 ....................................295
RC-4022................................................132 SCK-20..................................................205 948 ........................................................270
SC450 to SC451 ....................................292
RC-4070................................................147 SCK-30 to SCK-50 ................................206 950 ........................................................272
SC460....................................................298
RC-4100................................................145 SCK-70..................................................203 951 ........................................................273
SC462 to SC464 ....................................286
RC-4102................................................144 SCS-1000 to SCS-1108.........................328 952 ........................................................273
SC500 to SC506 ....................................311
RC-4200 to RC-4204...............................12 SMA-12.................................................203 953 to 956.............................................270
SC508 to SC512 ....................................312
RC-45226............................................3, 97 SRK-30 to SRK-50 ................................206 957 ........................................................286
SC514 to SC520 ....................................306
RC-45711................................................97 SS100T12 to SS200T36 ........................250 958 ........................................................278
SC522 to SC530 ....................................307
RC-45910..........................................62, 97 STF-4 ....................................................261 959 ........................................................274
SC532 to SC536 ....................................276
RC-47104..........................................34, 97 960 to 961.............................................289
SC540....................................................294
RC-49104..........................................79, 97 SC542 to SC548 ....................................295 T 962 ........................................................279
RC-49300..........................................92, 97 964 ........................................................287
SC550....................................................294 TB10100 to TB10101 ............................236
RC-49355 to RC-49360...........................94 965 to 966.............................................280
SC553....................................................296 TB10400................................................232
RC-49496 to RC-49504.....................72, 97 967 ........................................................281
SC554....................................................297 TB10800 to TB10801 ............................236
RC-54111................................................97 968 to 969.............................................288
SC555....................................................296 TB12480................................................232
RCK-8....................................................204 971 to 972.............................................276
SC556....................................................297 TB12960 to TB14109 ............................236
RCK-15..................................................203 973 to 974.............................................275
SC557 to SC559 ....................................297 TB14540................................................232
RCK-18..................................................204 975 to 976.............................................281
SC560....................................................298 TB83400................................................232
RCK-30..................................................206 977 ........................................................287
SC562 to SC564 ....................................299 TB86400 to TB86401 ............................236
RCK-32 to RCK-36 ................................204 980 ........................................................310
SC565....................................................297
RCK-50..................................................206 SC570 to SC574 ....................................275 W 984 to 984-VC.......................................308
985 ........................................................310
RCK-70 to RCK-73 ................................203 SC580 to SC583 ....................................301 WB-40 ...........................................328, 329
RCK-75..................................................204 985-VC ..................................................309
SC584 to SC585 ....................................302
Index
WR-100 to WR-104...............................202
RCK-151................................................206 986 ........................................................310
SC586 to SC589 ....................................293
986-VC ..................................................309
RCK-200 to RCK-210 ............................145
RCK-211 to RCK-219 ............................136
SC590....................................................303
250 987 ........................................................310
SC592 to SC593 ....................................304
250-60 ..................................................260 987-VC ..................................................309
RCK-220................................................145 SC594....................................................305
340
989 ........................................................310 45232 to 45251.........................................3 45465 to 45468.......................................32 45806 ....................................................113
991 to 993.............................................285 45256 ........................................................8 45469 to 45473.....................................115 45808 to 45809.....................................111
994 ........................................................300 45260 ........................................................3 45474-S ..................................................33 45810 ............................................111, 114
998 to 999.............................................283 45270 ....................................................114 45475 ......................................................32 45810-LH ..............................................114
45300 ........................................................2 45475-S ..................................................33 45812 ............................................111, 114
5000-6000 45302 ................................................2, 173 45476 ....................................................115 45812-LH to 45813-LH .........................114
5000 to 5007.........................................198 45303 to 45314.........................................2 45477 ........................................................4 45814 to 45818.....................................113
5008 ..............................................198, 218 45360 to 45364.......................................32 45478 to 45479.....................................115 45820 ....................................................111
5009 ......................................................198 45400 ........................................................3 45480 to 45480-CNC ................................4 45822 to 45830-LH ...............................112
5010 ......................................198, 328, 329 45401 ........................................................4 45481 ..............................................32, 129 45832 to 45835.....................................113
5011 to 5090.........................................198 45402 ........................................................3 45482, 45483, 45485..............................32 45837 to 45838.....................................111
6004 ......................................................193 45403 ........................................................4 45484 ......................................................33 45839 ....................................................114
45404 to 45406.........................................3 45486 ........................................................4 45850 to 45860.....................................113
20000 45408 to 45412.........................................4 45487 ..............................................32, 129 45880 to 45890.....................................115
45412-LH ..................................................7 45488 ........................................................8 45900 to 45928.......................................62
20003 to 20009.....................................338
45413 to 45414.........................................4 45489-S ..................................................33 45930 to 45944.......................................63
20200 to 20212.....................................225
45414-LH ..................................................7 45491 ..............................................32, 129 45944-CNC..............................................62
220T340 ........................................231, 244
45414-PS ..................................................6 45494 ....................................................114 45946 ......................................................63
220T640 ........................................236, 244
45415 to 45416.........................................4 45495 to 45496.......................................33 45946-CNC..............................................62
220T641 ........................................234, 244
45417 ........................................................8 45498 ........................................................8 45948 ......................................................63
41000 45418 to 45420.........................................4
45420-LH ..................................................7
45499 ......................................................32
45500 to 45505.......................................28
45948-CNC..............................................62
45949 ......................................................63
41422 to 41448.........................................7
45420-PS ..................................................6 45506 to 45511.......................................23 45950 ......................................................55
45422 ........................................................4 45520 ......................................................25 45960 to 45968.......................................61
42000 45422-LH ..................................................7 45540 to 45544.......................................29 45981 to 45992.......................................60
42420 to 42424.......................................22 45422-PS ..................................................6 45550 to 45551.......................................32
45424 ........................................................4 45560 to 45567.......................................31 46000
43000 45425 ....................................................4, 8 45570 to 45590.......................................30 46010 to 46014.......................................16
43100 to 43112.......................................19 45426 ........................................................4 45650 to 45652.......................................59 46020 to 46024.......................................15
43200 to 43226.........................................5 45426-LH ..................................................7 45660 to 45662.......................................58 46100 to 46108.......................................13
43300 to 43304.......................................19 45426-PS ..................................................6 45663 ....................................................129 46110 to 46112.......................................21
43414 to 43440.........................................5 45427 to 45430.........................................4 45666 to 45667.......................................58 46114 ......................................................14
43500 to 43616.......................................20 45431 ........................................................8 45668 to 45669.....................................129 46115 ......................................................13
43700 to 43812.........................................6 45432 to 45436.........................................4 45671 ......................................................58 46116 ......................................................14
43813 ......................................................45 45437 ....................................................4, 8 45672 to 45678.....................................129 46117 ......................................................13
43820 to 43850.........................................6 45438 to 45440.........................................4 45700 to 45728-CNC ..............................49 46118 ......................................................14
45440-LH ..................................................7 45729 ......................................................45 46119 to 46121.......................................13
44000 45441 ........................................................4 45730 to 45731.......................................54 46124 to 46132.......................................17
45441-LH ..................................................7 45732 to 45732-CNC ..............................49 46133 ......................................................21
44100 ......................................................22
45442 to 45444.........................................4 45733 ......................................................54 46134 ......................................................17
45000 45445 ....................................................4, 8
45446 ................................................4, 156
45750 ......................................................55
45751 to 45770.......................................49
46135 ......................................................21
46140 to 46168.......................................14
45100 to 45110.........................................2
45446-LH ..................................................7 45771 to 45779.......................................54 46170 to 46178.......................................15
45190 to 45202.........................................3
45447 to 45453-CNC ................................4 45780 to 45783.......................................55 46180 ................................................15, 57
45203 ....................................................3, 8
45454 to 45458.........................................5 45784 ......................................................63 46182 ......................................................15
45204 ........................................................3
45459 ........................................................4 45788 to 45789.......................................57 46184 ......................................................57
45206 ....................................................3, 8
45460 ......................................................32 45790 ....................................................121 46186 to 46191.......................................15
45208 to 45218S.......................................3
45460-S ..........................................33, 129 45792 to 45794, 45798...........................20 46192 ......................................................40
Index
45219 ........................................................8
45461 to 45462.......................................32 45796 ....................................................120 46194 ......................................................15
45220 to 45222.........................................3
45462-S ..................................................33 45800 to 45802.....................................112 46196 to 46197.......................................39
45223 ....................................................3, 8
45463 to 45464.......................................32 45804 ....................................................113 46200 to 46208.......................................13
45224 to 45230.........................................3
45464-S ..................................................33 45805 ....................................................112 46214 ......................................................14
45231 ....................................................3, 8
www.amanatool.com 341
46215 ......................................................13 47170 to 47173.......................................38 47745 ..............................................33, 192 49557 ....................................................109
46216 ......................................................14 47174 ..............................................38, 129 47746 ....................................................193 49558 ....................................................108
46217 ......................................................13 47178 to 47179.......................................39 47747 ..............................................33, 192 49559 ....................................................109
46218 ......................................................14 47180 to 47184.......................................36 47748 ....................................................196 49560 ....................................................108
46219 to 46221.......................................13 47190 to 47194.......................................40 47749 ....................................................192 49561 ....................................................109
46224 to 46234.......................................17 47200 to 47304.......................................41 47750 ....................................................196 49562 ....................................................160
46241 to 46263.......................................14 47400 to 47504-L ...................................42 47751 to 47753.....................................192 49563 ....................................................109
46296 to 46297.......................................39 47511 to 47515.....................................151 47754 to 47756.....................................193 49570 to 49574.......................................66
46300 to 46304...............................39, 166 47600 to 47604.............................117, 195 47757 ....................................................332 49592 to 49622.......................................73
46310 ......................................................13 47606 to 47610.....................................195 47758 ....................................................193 49640 to 49642.............................101, 158
46311 to 46313.......................................19 47611 ..............................................29, 195 47759 ....................................................192 49643 to 49663.....................................158
46314 to 46320.......................................13 47612 ....................................125, 160, 195 47760 ....................................................193 49664 to 49666.............................101, 158
46332 ......................................................19 47613 ....................................................125 47762 to 47763.....................................192 49667 to 49673.....................................158
46341 to 46349.......................................14 47614 ..............................................29, 195 47764 ....................................................196 49674 to 49676.............................101, 158
46350 ......................................................15 47615 to 47616.......................................29 47766 to 47769.....................................194 49677 ....................................................158
46351 ......................................................14 47618 ..............................................71, 195 47770 to 47772.....................................192 49680 to 49686.....................................101
46352 ......................................................15 47620 ............................................119, 195 47800 to 47822.....................................332 49700 to 49706.......................................65
46353 ......................................................14 47622 ............................................134, 195 49706-CNC..............................................67
46354 to 46356.......................................15 47632 ......................................................57 48000 49708 to 49710.......................................65
46357 to 46365.......................................14 47700 ....................................................192 48100 to 48102.......................................59 49710-CNC..............................................67
46367 ......................................................15 47701 ............................................192, 193 49720 ......................................................65
46376 to 46388.......................................63 47701-HP ..............................................192
49000 49730 to 49734.......................................71
46390 to 46392.......................................17 47702 ............................................192, 193
51000
49092 to 49122.......................................79
46400 to 46404...............................39, 166 47703 ....................................................193
49124 to 49126.......................................80
46410 ......................................................13 47704 ............................................192, 193 51100 ......................................................45
49200 to 49207.......................................81
46411 to 46413.......................................19 47705 ....................................................193 51200 to 51206.......................................43
49208 to 49214.......................................77
46414 to 46420.......................................13 47706 ............................................192, 193 51300 to 51319.......................................24
49232 ......................................................68
46430 to 46432.......................................19 47706-HP ..............................................192 51320 ........................................................7
49300 to 49302.......................................92
47707 ....................................................194 51321 to 51323.......................................24
47000 47708 ......................71, 119, 125, 134, 192
49310 ......................................................93
49340 to 49350.......................................92 51324 ........................................................7
47090 to 47093.......................................34 47709 ....................................................194 51325 to 51327.......................................24
49360 ......................................................94
47094 to 47097.......................................37 47710 ....................................................192 51400 ......................................................45
49400 to 49408.......................................69
47100 to 47104.......................................34 47711 ....................................................193 51402 ......................................................26
49409 ....................................................172
47105 ......................................................36 47712 to 47712-HP...............................192 51404 to 51405...............................18, 167
49410 to 49416.......................................69
47106 to 47108.......................................34 47713 ....................................................193 51406 to 51408.......................................26
49440 to 49442.............................101, 158
47109 ......................................................36 47714 to 47715.....................................192 51410 to 51412...............................18, 167
49443 ....................................................158
47110 ......................................................34 47716 ....................................................193 51420 to 51432.......................................27
49492 to 49496.......................................72
47111 ......................................................36 47718 to 47720.....................................192 51500 ......................................................45
49498 ..............................................72, 155
47112 ......................................................34 47721 ............................................192, 193 51502 ......................................................26
49499 to 49502.......................................72
47113 ......................................................36 47722 ....................................................193 51504 to 51505...............................18, 167
49503 ......................................................75
47114 ......................................................34 47723 ............................................192, 193 51506 to 51508.......................................26
49504 to 49506.......................................72
47115 ......................................................36 47724 ....................................................196 51510 ..............................................18, 167
49507 ......................................................75
47116 to 47120.......................................34 47725 to 47726.....................................194 51512 ..............................................18, 167
49508 to 49526.......................................72
47124 to 47129.......................................36 47727 to 47729.............................119, 194 51520 to 51522.......................................27
49528 to 49529.......................................75
47130 ......................................................37 47730 ....................................................196 51530 ......................................................84
49530 ....................................................138
47131 ......................................................36 47731 to 47733.....................................194 51540 to 51576.......................................76
49532 ............................................138, 219
47134 to 47138.......................................37 47734 to 47736.....................................193 51580 to 51590.......................................84
49534 ............................................138, 143
47140 to 47141.......................................34 47737 ....................................................194 51600 ......................................................45
Index
49535 to 49538.....................................138
47144 ......................................................22 47738 ....................................................192 51706 to 51712.......................................44
49540 to 49554.....................................108
47150 to 47154.......................................36 47739 to 47740.....................................196
49555 ....................................................109
47160 to 47162.......................................40 47741 to 47743.....................................192
49556 ....................................................108
342
53000
54246 ....................................................157 55360 to 55362.....................................150 56174 to 56179-CNC ..............................67
54250 ....................................................104 55363 to 55366.....................................196 56200 to 56208.......................................68
53100 to 53106.....................................117 54260 ....................................................106 55367 ............................................134, 196 56210 ..............................................68, 156
53107 ............................................117, 118 54262 ....................................................110 55368 ......................................71, 125, 196
53108 to 53206.....................................117 54266 ............................................101, 106 55369 ............................................119, 196 57000
53207 ............................................117, 119 54268 to 54269.....................................110 55370 ....................................................135 57114 to 57117.....................................167
53208 to 53410.....................................117 54270 to 54274.....................................124 55371 ....................................................196 57118 to 57120.....................................162
53600 ............................................118, 152 54278 ....................................................141 55380 ....................................................135 57122 to 57126.....................................170
53610 ....................................................119 54286 ............................................106, 156 55386 to 55387.....................................121 57127 ....................................................169
53630 to 53632.....................................157 54288 ....................................................106 55388 ....................................................124 57128 ....................................................170
53800 to 53816.....................................159 54292 ......................................................78 55389 to 55391.....................................122 57129 ....................................................173
53820 ....................................................160 54294 ......................................................91 55392 ....................................................120 57130 ....................................................170
53822 to 53828.....................................159 54295 ....................................................100 55393 to 55395.....................................122 57132 ....................................................173
54296 ......................................................89 55400 to 55401.....................................125
54000
57136 ....................................................168
54297 to 54299.......................................99 55402 ......................71, 119, 125, 134, 196 57138 to 57141.....................................164
54100 to 54108.......................................78 54302 to 54308.......................................90 55403 ....................................................196 57146 ....................................................162
54110 to 54112.......................................81 54310 to 54314.....................................155 55404 ......................................71, 119, 196 57147 ....................................................164
54113 ............................................140, 143 54322 to 54324.......................................89 55407 to 55408.....................................125 57148 ....................................................162
54114 ......................................................81 54330 to 54332.......................................90 55410 to 55414.....................................126 57149 to 57152.....................................164
54116 to 54117.....................................140 54350 to 54356.....................................100 55420 ....................................................134 57153 to 57154.....................................165
54118 to 54119.....................................141 54360 ......................................................86 55421 ....................................................133 57155 ............................................165, 172
54120 ......................................................86 54400 to 54410.....................................102 55422 to 55424.....................................134 57156 to 57158.....................................171
54121 ....................................................141 54412 to 54414.....................................103 55426 ....................................................153 57159 ....................................................165
54122 to 54126.......................................86 54520 to 54532.....................................146 55428 ....................................................143 57160 ....................................................171
54127 ......................................................81 55430 ....................................................134 57161 ....................................................173
54128 to 54130.......................................78 55000 55431 ....................................................133 57162 ....................................................171
54131 ....................................................151 55102 to 55103.....................................224 55432 to 55433.....................................131 57165 to 57166.....................................168
54132 ......................................................78 55149 ......................................................29 55434 ....................................................134 57168 ....................................................171
54133 ....................................................153 55170 to 55174.......................................38 55436 to 55439.....................................131 57169 ....................................................172
54134 to 54135.......................................78 55178 to 55179.......................................39 55440 ....................................................134 57170 ....................................................163
54136 to 54142.......................................85 55200 to 55212.....................................220 55441 ....................................................133 57184 to 57187...............................34, 166
54144 to 54150.......................................80 55220 to 55224.....................................223 55442 to 55452.....................................134 57190 to 57194...............................74, 163
54160 to 54162.......................................77 55230 to 55232.......................................59 55454 to 55456.....................................128 57200 ....................................................174
54163 ..............................................77, 152 55234 to 55239.....................................222 55460 to 55464.....................................137 57202 to 57210.....................................175
54164 to 54172.......................................77 55248 to 55259.......................................29 55466 to 55468.....................................123 57214 to 57218.....................................176
54173 to 54175.....................................151 55260 to 55269.....................................221 55500 to 55510.....................................116 57220 ....................................................177
54176 ......................................................87 55282 to 55288.....................................221 55600 to 55610.....................................220 57228 to 57230.....................................180
54180 to 54182.......................................85 55290 to 55292.....................................224 55620 to 55628.....................................221 57232 ....................................................169
54186 to 54188.......................................88 55298 ....................................................221 55640 to 55642.....................................212 57238 ....................................................177
54190 to 54192.......................................87 55300 to 55304.....................................160 55650 ....................................................224 57242 to 57246.....................................178
54198 to 54200.....................................107 55312 to 55314.......................................42 57248 to 57254.....................................179
54204 ....................................................104 55320 to 55330.....................................127 56000 57257 ....................................................180
54208 ......................................................89 55340 to 55343.....................................126 56100 ......................................................67 57258 ....................................................177
54210 to 54213.......................................91 55346 ....................................................127 56108 to 56114.......................................64 57260 ....................................................180
54216 ......................................................88 55350 ....................................................135 56116 ......................................................68
54217 ......................................................91 55352 ....................................................134 56118 to 56122.......................................67 58000
54218 to 54220.....................................104 55353 ....................................................125 56125 to 56128.......................................66 58110 ....................................................156
54221 ....................................................142 55354 ............................................125, 134 56130 to 56140.......................................64
Index
54222 to 54224.....................................105
54227 to 54229.....................................142
55356 ....................................125, 134, 196 56148 to 56150.......................................65
59000
55357 ..............................71, 125, 134, 196 56170 ......................................................67
59000 to 59702.....................................218
54232 ....................................................106 55358 ....................................................196 56172 ..............................................67, 156
54234 ....................................................105
www.amanatool.com 343
61000
67082 ....................................................195
67083 ....................................................197
215000-217000 610000
61068 to 61216.....................................329 67086 ....................................................195 215005 to 215018.................................211 610200 to 610240.................................229
61218 ....................................................326 67087 ....................................................197 217005 to 217018.................................211 610300 to 610300-30 ...........................231
61220 to 61240.....................................329 67088 to 67089.....................................195 610301 ..................................................230
61241 to 61242.....................................324 67090 to 67097.....................................197 301000 610401 ..................................................235
61244 to 61248.....................................329 67098 ....................................................194 301003 to 301105.................................208 610504 ..................................................232
61249 ....................................................330 67099 ....................................................197 610600 to 610600-30 ...........................233
61258 ....................................................322 67100 ....................................................194 302000-303000 610601 to 610601-30 ...........................235
61260 ....................................................324 67101 ....................................................195 610720 ..................................................244
302004 to 302008.................................209
61262 ....................................................323 67103 ....................................................194 610721 to 610721-30 ...........................241
302010 ..................................................217
61264 ....................................................322 67109 ....................................................197 610800 to 610800-30 ...........................236
302012 to 302100.................................209
61265 ............................................323, 324 67111 ....................................................195 610800-TS ............................................237
302105 to 303105.................................217
61268 ....................................................322 67115 ....................................................197 610801 to 610801-30 ...........................234
61270 ....................................................321
61272 to 61275.....................................325
67116 ....................................................194
304000 610801-TS ............................................237
67117 ....................................................197
61276 to 61290.....................................320 67118 to 67125.....................................195
304003 to 304009.................................209
612000-618000
304010 ..................................................217
61292 to 61293.....................................319 67126 ....................................................194 612240 to 612300-30 ...........................229
304011 to 304100.................................209
61296 to 61297.....................................322 67128 to 67132.....................................195 612360 to 612360-30 ...........................231
304105 ..................................................217
61298 ....................................................321 67134 ....................................................197 612401 ..........................................230, 262
304111 to 304130.................................209
61303 to 61310.....................................320 67144 ............................................328, 329 612401-70 ............................................230
61330 to 61346.....................................315 612480 to 612480-30 ...........................231
61350 to 61352.....................................314
67146 ....................................................197
67153 ............................................328, 329
305000 612600 to 612600-30 ...........................233
61354 ....................................................315 67176 ....................................................197 305005 to 305008.................................208 612601 to 612601-30 ...........................235
61355 to 61358.....................................317 67200 to 67206.....................................195 305010 to 305105.................................217 612604 ..................................................232
61360 to 61364.....................................316 67208 ....................................................196 612720 to 612720-30 ...........................233
61365 ....................................................258 67220 to 67252.....................................334 306000 612721 to 612721-30 ...........................235
61366 ....................................................316 67254 ....................................................271 306005 to 306008.................................208 612841 to 612841-30 ...........................241
61368 ....................................................258 67350 to 67800.......................................95 612960 to 612960-30 ...........................236
61370 to 61378.....................................271 310000-365000 612960-TS ............................................237
61384 to 61388.....................................317 201000-202000 310010 to 310105.................................217
612961 to 612961-30 ...........................234
61411 to 61422.....................................316 614108 to 614108-30 ...........................236
201003 to 201105.................................208 313004 to 315010.................................210
61450 ....................................................323 614108-TS ............................................237
202004 to 202090.................................209 315015 to 315018.................................211
61451 ....................................................314 614109 to 614109-30 ...........................234
315070 to 315090.................................210
61452 ....................................................323
61453 to 61459.....................................314
203000 315105 to 315108.................................211
614280 ..................................................229
614401 to 614401-70 ...........................230
203011 to 203040.................................214 316005 to 316012.................................212
61460 ....................................................318 614420 to 614540-30 ...........................231
203132 to 203258.................................213 317005 to 317018.................................211
61461 ....................................................314 614541 ..................................................235
203260 ..................................................214 358010 to 359105.................................217
61462 to 61465.....................................318 614704 ..................................................232
203261 to 203286.................................213 363002 to 365050.................................216
61466 ....................................................314 614720 to 614720-30 ...........................233
203300 ..................................................214
61467 to 61485.....................................318
61600 to 61676.....................................333
203301 to 203325.................................213 413000-463000 614721 to 614721-30 ...........................235
614840 ..................................................233
203350 ..................................................214 413004 to 415090.................................210
614841 ..................................................235
62000 203351 to 203405.................................213
203431 ..................................................215
416005 to 416012.................................212
420208 to 420998.................................215
614961 ..................................................241
62282 ....................................................328 615100-TS ............................................237
203751 to 203755.................................213 424000 to 424006.................................223
615480 ..................................................232
463002 to 463045.................................216
67000 204000-206000
616109 ..................................................241
616128 ..................................................236
67007 ....................................................197 510000-596000
Index
204003 to 204130.................................209 616129 ..................................................234
67008 ............................................197, 218
205005 to 205008.................................208 510101 to 520121-30 ...........................243 616320 to 616360-30 ...........................229
67010 ....................................................223
206005 to 206008.................................208 575601 to 596001.................................243 616480 to 616600-30 ...........................231
67013 to 67080.....................................197
616804 ..................................................232
344
616960 ..................................................233
616961 ..................................................235
651000 66F000- 710000
618108 to 618108-30 ...........................233 651010 to 651010-R .............................257 66RM000 710200 ..................................................230
618109 to 618109-30 ...........................235 651030 to 651030-1 .............................256 66F001 to 66F012.................................331
618132 ..................................................236 651210 to 651210-R .............................257 66RM600...............................................331 712000
618133 ..................................................234 651230 ..................................................256 712240 ..................................................230
618320 ..................................................229 651280 to 651880-AK...........................257 675000 712480 ..................................................233
618540 ..................................................231 675600 ..................................................236 712601 ..................................................234
656000 712960 ..................................................233
620000 656010 to 656010-R .............................257 683000-684000 712961 ..................................................234
620120 ..................................................233 656030 ..................................................256 683400 ..................................................231
620121 ..................................................235 684004 ..................................................232 714000
620360 ..................................................229 658000 684800 ..................................................233 714280 to 714280-30 ...........................230
620600 ..................................................231 658010 to 658020-R .............................257 684801 ..................................................235 714540 ..................................................233
658030 to 658040-1 .............................256 714541 to 714841.................................234
64F000- 658060 to 658060-1 .............................255 686000
64RM000 686400 ..................................................236 716000
64F000 to 64F006 .........................328, 330 65RM000 686401 to 686401-30 ...........................234 716320 to 716320-30 ...........................230
64F008 to 64F015 .................................330 65RM127...............................................331 716600 ..................................................233
64F016 to 64F017 .........................328, 330 692000-694000 716601 ..................................................234
64F018 to 64F095 .................................330 663000 692400 to 694000.................................231 716800 ..................................................233
64F096 ..........................................328, 330 663000 to 663010.................................248 694001 ..................................................235 716801 ..................................................234
64F097 ..................................................330 694004 ..................................................232 716960 ..................................................233
64F098 to 64F099 .........................328, 330 696000 ..................................................233 716961 ..................................................234
64F100 to 64F177 .................................331
64RM193 to 64RM599 ..........................331
©2011 All rights reserved.
No part of this catalog may be reproduced without written consent of Amana Tool Corp.
The specifications, current at time of publication, are intended for reference purposes and are subject to change without notice.
Amana Tool® and Redefining Woodworking® are registered trademarks of Amana Tool Corporation.
Dicut,™ ‘DI-COUNT’,™ Ditec,™ Duo-Set,™ Dynabit,™ E-Z Change,™ E-Z Dial,™ Floor King,™ In-Groove,™ In-Tech,™ Insert Bevel Trim,™ Insert Superabbet, Jr,™
Instile & Rail System,™ No-File,™ Nova,™ Nova System,™ Profile Pro,™ Quadraset,™ Presitge,™ Super Plunge,™ Superabbet,™ Supertrim,™ Ultra-Glide,™
Ultratrim,™ and Vari-Depth,™ are trademarks of the Amana Tool® Corporation.
Altendorf® is a registered trademark of Wilhelm Altendorf GmbH & Co. KG. Alucobond® is a registered trademark of 3A Composites GmbH.
Amerock® is a registered trademark of Newell Operating Company. ATI™ is a trademark of Advanced Technology Inc. Avonite® and Avonite Surfaces®
are registered trademarks of Aristech Acrylics LLC. Castle® is a registered trademark of Castle, Incorporated. Crain™ is a trademark of Crain Cutter
Co. Dibond® is a registered trademark of Alcan Composites USA Inc. DuPont,® Delrin,® Corian® and Teflon® are registered trademarks of E. I. du Pont
de Nemours and Company. Formica,® DecoMetal® and Surell® are registered trademarks of The Diller Corporation. Fountainhead® is a registered
trademark of Kohler Co. Hinge-Mate™ is a trademark of Hinge Mate. HOLZ HER® is a registered trademark of Holz-Her GmbH. Incra® is a registered
trademark of Taylor Design Group, Inc. Keller™ is a trademark of Keller & Co. Lamello® is a registered trademark of Lamello AG. Leigh® is a
registered trademark of Leigh Industries Ltd. Lexan® is a registered trademark for SABIC Innovative Plastics IP B.V. Lucite® is a registered trademark
of the Lucite International Inc. Morten™ is a trademark of The Black & Decker Corporation. Norfield® is a registered trademark of Norfield Industries.
Index
Omnijig® and Delta® are registered trademarks of Chang Type Industrial Co., Ltd. Phillips® is a registered trademark of Phillips Screw Company
Corporation. Plexiglas® is a registered trademark of the Arkema France. Porter-Cable® is a registered trademark of The Black & Decker Corporation.
Roberts® is a registered trademark of Roberts Consolidated Industries, Inc. SCMI® is a registered trademark of SCM Group S.p.A. Striebig® is a
registered trademark of Striebig AG Corporation. Torx® is a registered trademark of Acument Intellectual Properties, LLC. Trespa® is a registered
trademark of Trespa International B.V. Wilsonart® and Gibraltar® are registered trademarks of Premark RWP Holdings Inc. Xanita® is a registered
trademark of Sambendan Limited. Xanita LightBoard,™ X-board,™ X-board Plus,™ and X-Board Lite™ are trademarks of Sambendan Limited.
www.amanatool.com 345
Inch Inch
Decimals Fractions (x) Millimeters
/64 /32 /16 /8 /4 /2 MM 1" + (x) 2" + (x) 3" + (x) 4" + (x) 5" + (x)
25.400 50.800 76.200 101.600 127.000
0.015625 1/64 0.397 25.797 51.197 76.597 101.997 127.397
0.031250 1/32 0.794 26.194 51.595 76.994 102.394 127.794
0.046875 3/64 1.191 26.591 51.991 77.391 102.791 128.191
0.062500 1/16 1.588 26.988 52.388 77.788 103.188 128.588
0.078125 5/64 1.984 27.384 52.784 78.184 103.584 128.984
0.093750 3/32 2.381 27.781 53.181 78.581 103.981 129.381
0.109375 7/64 2.778 28.178 53.578 78.978 104.378 129.778
0.125000 1/8 3.175 28.575 53.975 79.375 104.775 130.175
0.140625 9/64 3.572 28.972 54.372 79.772 105.172 130.572
0.156250 5/32 3.969 29.369 54.769 80.169 105.569 130.969
0.171875 11/64 4.366 29.766 55.166 80.568 105.966 131.366
0.187500 3/16 4.762 30.162 55.562 80.962 106.362 131.762
0.203125 13/64 5.159 30.559 55.959 81.359 106.759 132.159
0.218750 7/32 5.556 30.956 56.356 81.756 107.156 132.556
0.234375 15/64 5.953 31.353 56.753 82.153 107.553 132.953
0.250000 1/4 6.350 31.750 57.150 82.550 107.950 133.350
0.265625 17/64 6.747 32.147 57.547 82.947 108.347 133.747
0.281250 9/32 7.144 32.544 57.944 83.344 108.744 134.144
0.296875 19/64 7.541 32.941 58.341 83.741 109.141 134.541
0.312500 5/16 7.938 33.338 58.738 84.138 109.538 134.938
0.328125 21/64 8.334 33.734 59.134 84.534 109.934 135.334
0.343750 11/32 8.731 34.131 59.531 84.931 110.331 135.731
0.359375 23/64 9.128 34.528 59.928 85.328 110.728 136.128
0.375000 3/8 9.526 34.925 60.325 85.725 111.125 136.525
0.390625 25/64 9.922 35.322 60.722 86.122 111.522 136.922
0.406250 13/32 10.319 35.719 61.119 86.519 111.919 137.319
0.421875 27/64 10.716 36.116 61.516 86.916 112.316 137.716
0.437500 7/16 11.112 36.512 61.912 87.312 112.712 138.112
0.453125 29/64 11.509 36.909 62.309 87.709 113.109 138.509
0.468750 15/32 11.906 37.306 62.706 88.106 113.506 138.906
0.484375 31/64 12.303 37.703 63.103 88.503 113.903 139.303
0.500000 1/2 12.700 38.100 63.500 88.900 114.300 139.700
0.515625 33/64 13.097 38.497 63.897 89.297 114.697 140.097
0.531250 17/32 13.494 38.894 64.294 89.694 115.094 140.494
0.546875 35/64 13.891 39.291 64.691 90.091 115.491 140.891
0.562500 9/16 14.288 39.688 65.088 90.488 115.888 141.288
0.578125 37/64 14.684 40.084 65.484 90.884 116.284 141.684
0.593750 19/32 15.081 40.481 65.881 91.281 116.681 142.081
0.609375 39/64 15.478 40.878 66.278 91.678 117.078 142.478
0.625000 5/8 15.875 41.275 66.675 92.075 117.475 142.875
0.640625 41/64 16.272 41.672 67.072 92.472 117.872 143.272
0.656250 21/32 16.669 42.069 67.469 92.869 118.269 143.669
0.671875 43/64 17.066 42.466 67.866 93.266 118.666 144.066
Conversion Table
0.687500 11/16 17.462 42.862 68.262 93.662 119.062 144.462
0.703125 45/64 17.859 43.259 68.659 94.059 119.459 144.859
0.718750 23/32 18.256 43.656 69.056 94.456 119.856 145.256
0.734375 47/64 18.653 44.053 69.453 94.855 120.253 145.653
0.750000 3/4 19.050 44.450 69.850 95.250 120.650 146.050
0.765625 49/64 19.447 44.847 70.247 95.647 121.047 146.447
0.781250 25/32 19.844 45.244 70.644 96.044 121.444 146.844
0.796875 51/64 20.241 45.641 71.041 96.441 121.841 147.241
0.812500 13/16 20.638 46.038 71.438 96.838 122.238 147.638
0.828125 53/64 21.034 46.434 71.834 97.234 122.634 148.034
0.843750 27/32 21.431 46.831 72.231 97.631 123.031 148.431
0.859375 55/64 21.828 47.228 72.628 98.028 123.428 148.828
0.875000 7/8 22.225 47.625 73.025 98.425 123.825 149.225
0.890625 57/64 22.622 48.022 73.422 98.822 124.222 149.622
0.906250 29/32 23.019 48.419 73.819 99.219 124.619 150.019
0.921875 59/64 23.416 48.816 74.216 99.616 125.016 150.416
0.937500 15/16 23.812 49.212 74.612 100.012 125.412 150.812
0.953125 61/64 24.209 49.609 75.909 101.409 126.809 152.209
0.968750 31/32 24.606 50.000 75.406 100.806 126.206 151.606
0.984375 63/64 25.003 50.403 75.803 101.203 126.603 152.003
346
Visit our website www.amanatool.com for
WOODWORKING TIPS &
TECHNIQUES
BY MASTER CRAFSTMAN & TEACHER
I’m extremely proud to be associated with Amana Tool®. As a long-time woodworker with over thirty years of woodworking
experience, I’ve tried nearly every brand of saw blade and router bit on the market. Amana makes the best.
Amana Tool® has many decades of experience producing only the finest saw blades, router bits, shaper cutters and other
cutting tools. Like fine furniture, the difference between superior and average is always in the details. Amana uses only the
finest steel and carbide available, and their manufacturing standards are second to none. Amana produces the broadest
selection of tools that I’ve encountered. Regardless of the job at hand, when I peruse the pages of an Amana catalog I can
find a tool to make the cut. In fact, Amana makes many unique tools that you won’t find anywhere else.
With Amana tools in my shop, I’m able to produce my finest work, and you can too.
ASK LONNIE
www.amanatool.com
Dealer
Amana Tool® / Headquarters
120 Carolyn Boulevard
Farmingdale, New York 11735 USA
Phone: +1 (631) 752-1300 ©2011 All rights reserved.
No part of this catalog may be reproduced without
Toll-Free Phone: (800) 445-0077
written consent of Amana Tool Corp.
Fax: +1 (631) 752-1674
Toll Free Fax: (877) 676-0077 (orders only)
Email: tools@amanatool.com
Amana Tool® / West Coast
2030 Gillespie Way - Suite 109
El Cajon, California 92020 USA
Phone: +1 (619) 596-8590
Toll-Free Phone: (800) 472-6226
Fax: +1 (619) 596-8599
Toll Free Fax: (888) 355-8599 (orders only)
www.amanatool.com
7 38685 26112 5
FORM #AM-1-12
You might also like
- Philips Professional Lighting Price - Sept 2013No ratings yetPhilips Professional Lighting Price - Sept 2013103 pages
- Arauco Ficha Tecnica Melamina Vesto Ing18ene 21No ratings yetArauco Ficha Tecnica Melamina Vesto Ing18ene 216 pages
- Ductile Iron Fittings & Specials - by NeoNo ratings yetDuctile Iron Fittings & Specials - by Neo59 pages
- Proto 108 - Pliers, Clamping, Cutting (p.739-788)No ratings yetProto 108 - Pliers, Clamping, Cutting (p.739-788)50 pages
- Siesta Furniture: Global Design & FunctionalityNo ratings yetSiesta Furniture: Global Design & Functionality176 pages
- Hettich Furniture Fittings and Applications US Stocking CatalogNo ratings yetHettich Furniture Fittings and Applications US Stocking Catalog208 pages
- Atomac & Durco Fully Lined Process Valves and Accessories.: Designed and Produced by The Latest TechnologiesNo ratings yetAtomac & Durco Fully Lined Process Valves and Accessories.: Designed and Produced by The Latest Technologies48 pages
- Multilink's Commercial, Business and Residential Product SolutionsNo ratings yetMultilink's Commercial, Business and Residential Product Solutions144 pages
- Osma Soil Waste Design Inst Guide Sept05 SW207 PDFNo ratings yetOsma Soil Waste Design Inst Guide Sept05 SW207 PDF52 pages
- Furniture & Cabinetmaking 279 - Jan 2019 PDFNo ratings yetFurniture & Cabinetmaking 279 - Jan 2019 PDF84 pages
- Jesco Lighting - Specialty Lighting Solutions 2011No ratings yetJesco Lighting - Specialty Lighting Solutions 201160 pages
- Woodworking Tools & Kitchen Cabinets Guide100% (1)Woodworking Tools & Kitchen Cabinets Guide148 pages
- A3 Stair Balustrade Technical Data SheetNo ratings yetA3 Stair Balustrade Technical Data Sheet12 pages
- C-C-2017 - Wood Construction ConnectorsNo ratings yetC-C-2017 - Wood Construction Connectors172 pages
- Isover Loft Top Insulation Installation Guide100% (1)Isover Loft Top Insulation Installation Guide20 pages
- Amana Tool 2020-21 Full Line Tooling Catalog UpdatedNo ratings yetAmana Tool 2020-21 Full Line Tooling Catalog Updated409 pages
- Machine and Power Drive Parts Ridgid Completo PDFNo ratings yetMachine and Power Drive Parts Ridgid Completo PDF180 pages
- Virginia Abrasives Bonded Abrasive CatalogNo ratings yetVirginia Abrasives Bonded Abrasive Catalog5 pages
- Machine Power Drive Parts Catalog May 2012 PDFNo ratings yetMachine Power Drive Parts Catalog May 2012 PDF175 pages
- Slitter Knives (Top/Bottom Slitter Knives) 裁切專用刀具-分條圓刀 (上/下圓刀)No ratings yetSlitter Knives (Top/Bottom Slitter Knives) 裁切專用刀具-分條圓刀 (上/下圓刀)3 pages
- Buderus Hot Work Tool Steel 2344 ISO-B: CharacteristicsNo ratings yetBuderus Hot Work Tool Steel 2344 ISO-B: Characteristics2 pages
- Lab Manual: Department of Mechanical EngineeringNo ratings yetLab Manual: Department of Mechanical Engineering68 pages
- Metal Forming: Rolling, Forging, ExtrusionNo ratings yetMetal Forming: Rolling, Forging, Extrusion83 pages
- Features: Finishing-Purpose of Negative Chip Breaker For Steel TurningNo ratings yetFeatures: Finishing-Purpose of Negative Chip Breaker For Steel Turning4 pages