Scribd
Upload
218 views1 page

Wet Wire Drawing Machine ZHN-G

The document describes a wet wire drawing machine that can draw high-strength steel wire, stainless steel wire, and non-ferrous metal wire. It uses submerged lubrication and cooling to allow for straight wire guidance through the drawing dies, reducing metal abrasion and allowing economic die lifetime. The machine comes in single-chamber, double-chamber, and fine wire models, and can produce wire diameters from 0.8 to 0.02mm at speeds up to 30m/s. Key features include direct wire guidance, cleaning jets, a double chamber design for availability, and a compact, easily operated overhead design.

Uploaded by

mazaher.ramazani
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
218 views1 page

Wet Wire Drawing Machine ZHN-G

The document describes a wet wire drawing machine that can draw high-strength steel wire, stainless steel wire, and non-ferrous metal wire. It uses submerged lubrication and cooling to allow for straight wire guidance through the drawing dies, reducing metal abrasion and allowing economic die lifetime. The machine comes in single-chamber, double-chamber, and fine wire models, and can produce wire diameters from 0.8 to 0.02mm at speeds up to 30m/s. Key features include direct wire guidance, cleaning jets, a double chamber design for availability, and a compact, easily operated overhead design.

Uploaded by

mazaher.ramazani
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

WET WIRE DRAWING MACHINE ZHN-G

Wet wire drawing machines are slip drawing machines which are
designed for drawing of high-strength steel wire, stainless steel wire and
wire of non-ferrous metals.

The desired quality of the wire and a economic lifetime of the drawing
tool are reached due to a diameter reduction per draft that is adequate
to the tensile strength of the wire as well as a straight guiding of the wire
through the drawing dies. The metal abrasive
wear settling in front of the drawing die is washed away by the
highly intense direct cooling. This separate device allows for a reliable
lubrication of the drawing dies and a good heat exhaust
from this area.

Wet wire drawing machines are produced in different sizes:


- single-chamber wet wire drawing machine with submerged
lubrication up to 12 drafts
- double-chamber wet wire drawing machine with submerged
lubrication up to 25 drafts
- fine wire wet drawing machine with spray lubrication up to
31 drafts
On these machine types wire with diameters ranging from 0.8 to 0.02mm can be
produced at a speed of up to 30 m/s.

Special features of wet wire drawing machines:


- direct guiding of the wire into the drawing die due to patented
wire guiding
- additional jets for the washing of the drawing dies
- better plant availability due to double-chamber design
- maintenance-free design due to contact-free gasket system
- low noise level despite high drawing speed
- compact modern shift equipment integrated, operation directly
at the machine
- easy to operated due to overhead drawing tools
- installation without foundation guarantees flexibility and easy commissioning

You might also like