742 226
65° Dualband Directional Antenna
Kathrein’s dual band antennas are ready for 3G applications,
covering all existing wireless bands as well as all spectrum under
consideration for future systems, AMPS, PCS and 3G/UMTS.
These cross-polarized antennas offer diversity operation in
the same space as a conventional 800 MHz antenna, and are
mountable on our compact sector brackets.
• Wide band operation.
• Exceptional intermodulation characteristics. 806–960 MHz
• High strength pultruded fiberglass radome.
General specifications:
Frequency range 806–960 MHz
1710–2170 MHz
VSWR <1.5:1
Impedance 50 ohms
Intermodulation (2x20w) IM3: <-150 dBc Horizontal pattern Vertical pattern
Polarization +45° and -45° ±45°-polarization ±45°-polarization
Connector 4 x 7-16 DIN female
Isolation intrasystem >30 dB
intersystem >45 dB (806–960 // 1710–2170 MHz) 1710–2170 MHz
Weight 16.5 lb (7.5 kg)
Dimensions 22.8 x 10.3 x 5.5 inches
(579 x 262 x 139 mm)
Equivalent flat plate area 1.73 ft2 (0.161 m2)
Wind survival rating* 120 mph (200 kph)
Shipping dimensions 29 x 11.9 x 7.6 inches
(736 x 302 x 192 mm)
Shipping weight 21 lb (9.5 kg)
Mounting Fixed mount options are available for 2 to
4.6 inch (50 to 115 mm) OD masts. Panel Horizontal pattern Vertical pattern
may be inverted. ±45°-polarization ±45°-polarization
See reverse for order information.
Specifications: 806–866 MHz 824–894 MHz 880–960 MHz 1710–1880 MHz 1850–1990 MHz 1920–2170 MHz
Gain 11.1 dBi 11.4 dBi 11.8 dBi 12.8 dBi 13.3 dBi 13.6 dBi
Front-to-back ratio
co-polar >23 dB >23 dB >25 dB >25 dB >25 dB >25 dB
total power (180° ± 30°) >20 dB >20 dB >22 dB >22 dB >22 dB >22 dB
Maximum power per input 250 watts (at 50°C) 250 watts (at 50°C) 250 watts (at 50°C) 200 watts (at 50°C) 200 watts (at 50°C) 200 watts (at 50°C)
+45° and -45° polarization 67° (half-power) 66° (half-power) 64° (half-power) 66° (half-power) 60° (half-power) 60° (half-power)
horizontal beamwidth
+45° and -45° polarization 34° (half-power) 33° (half-power) 30° (half-power) 20° (half-power) 18° (half-power) 17.5° (half-power)
vertical beamwidth
Cross polar ratio
Main direction 0° 25 dB (typical) 25 dB (typical) 25 dB (typical) 16 dB (typical) 18 dB (typical) 20 dB (typical)
Sector ±60° >10 dB >10 dB >10 dB >10 dB >10 dB >10 dB
* Mechanical design is based on environmental conditions as
stipulated in EIA-222-F (June 1996) and/or ETS 300 019-1-
4 which include the static mechanical load imposed on an
antenna by wind at maximum velocity. See the Engineering
Section of the catalog for further details.
10715-D
936.2949/b
Kathrein Inc., Scala Division Post Office Box 4580 Medford, OR 97501 (USA) Phone: (541) 779-6500 Fax: (541) 779-3991
Email: communications@kathrein.com Internet: www.kathrein-scala.com
742 226
65° Dualband Directional Antenna
22.8 inches
(579 mm)
35 mm
M6 24.8 inches
(630 mm)
26.4 inches
(670 mm)
64 mm
M8
2 x 738 546 Mounting Kit 5.5 inches
(139 mm)
10.3 inches
Mounting Options: (262 mm)
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
Profile PA2
850 10013 Tilt Kit
for use with the 2 x 738 546 mounting kit
0–34 degrees downtilt angle.
1710/2170 1710/2170
-45° +45°
806/960 806/960
-45° +45°
Order Information:
Model Description
742 226 Antenna with 4 x 7-16 DIN connectors
0° electrical downtilt
All specifications are subject to change without notice. The latest specifications are available at www.kathrein-scala.com.
Kathrein Inc., Scala Division Post Office Box 4580 Medford, OR 97501 (USA) Phone: (541) 779-6500 Fax: (541) 779-3991
Email: communications@kathrein.com Internet: www.kathrein-scala.com
