Scribd
Upload
2K views2 pages

K 739619

This document provides specifications for the Kathrein Inc. Scala Division 739 619 65° Panel Antenna. The antenna operates within the 806-960 MHz frequency range, has a gain of 2 x 8.5-9 dBi, 50 ohm impedance, VSWR of <1.5:1, maximum input power of 2 x 350 watts, ±45° polarization beamwidths of 70-65 degrees, and includes 7/16 DIN female connectors. Mounting options are available for mast diameters between 2-4.6 inches.

Uploaded by

mbare80
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views2 pages

K 739619

This document provides specifications for the Kathrein Inc. Scala Division 739 619 65° Panel Antenna. The antenna operates within the 806-960 MHz frequency range, has a gain of 2 x 8.5-9 dBi, 50 ohm impedance, VSWR of <1.5:1, maximum input power of 2 x 350 watts, ±45° polarization beamwidths of 70-65 degrees, and includes 7/16 DIN female connectors. Mounting options are available for mast diameters between 2-4.6 inches.

Uploaded by

mbare80
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Kathrein Inc.

, Scala Division Post Ofce Box 4580 Medford, OR 97501 (USA) Phone: (541) 779-6500 Fax: (541) 779-3991
Email: communications@kathrein.com Internet: www.kathrein-scala.com
739 619
65 Panel Antenna
Specications:
Frequency range 806960 MHz
Gain 2 x 8.5 dBi (806880 MHz)
2 x 9 dBi (880960 MHz)
Impedance 50 ohms
VSWR < 1.5:1
Intermodulation (2x20w) IM3: <-150dBc
Polarization +45 and -45
Front-to-back ratio >27 dB (co-polar)
Maximum input power 2 x 350 watts (at 50C)
45 polarization 70 degrees (half-power) (806880 MHz)
horizontal beamwidth 65 degrees (half-power) (880960 MHz)
45 polarization 70 degrees (half-power) (806880 MHz)
vertical beamwidth 68 degrees (half-power) (880960 MHz)
Connector 2 x 7/16 DIN female
Isolation >30 dB
Weight 6.6 lb (3 kg)
Dimensions 10.1 x 10.3 x 4.6 inches
(256 x 262 x 116 mm)
Equivalent at plate area 0.86 ft
2
(0.08 m
2
)
Wind survival rating* 120 mph (200 kph)
Shipping dimensions 14.8 x 11.3 x 6.5 inches
(377 x 287 x 165 mm)
Shipping weight 9.9 lb (4.5 kg)
Mounting Fixed mount options are available for
2 to 4.6 inch (50 to 115 mm) OD masts.
See reverse for order information.
* Mechanical design is based on environmental conditions as stipulated in
EIA-222-F (June 1996) and/or ETS 300 019-1-4 which include the static
mechanical load imposed on an antenna by wind at maximum velocity.
See the Engineering Section of the catalog for further details.
Kathreins X-polarized antennas are designed for use in digital
polarization diversity systems. Analog transmissions may be
accomplished using power dividers to apply equal levels of
analog transmissions to each port.
X-polarized (+45 and -45).
UV resistant pulltruded radomes.
Wideband vector dipole technology.
DC Grounded metallic parts for impulse suppression.
Horizontal pattern
45- polarization
Vertical pattern
45- polarization
10534-D
936.1408/f
Kathrein Inc., Scala Division Post Ofce Box 4580 Medford, OR 97501 (USA) Phone: (541) 779-6500 Fax: (541) 779-3991
Email: communications@kathrein.com Internet: www.kathrein-scala.com
All specications are subject to change without notice. The latest specications are available at www.kathrein-scala.com.
Mounting Options:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
742 033 Three-panel Sector Mounting Kit
(120 deg. ea.) for 4.5 inch
(114.3 mm) OD mast.
742 034 Three-panel Sector Mounting Kit
(120 deg. ea.) for 5.5 inch
(139.7 mm) OD mast.
739 619
65 Panel Antenna
Order Information:
Model Description
739 619 Antenna with 7/16 DIN connectors
0 electrical downtilt
10.1 inches
(256 mm)
13.8 inches
(350 mm)
4.6 inches
(116 mm)
10.3 inches
(262 mm)
2 x 738 546 Mounting Kit
35 mm
M6
64 mm
M8
2.625 inches 0.125
(68 mm 4)

You might also like