Scribd
Upload
515 views2 pages

Cylinder Liner Inspection Report

The cylinder liner inspection report found vertical scratches on several cylinders but determined the liners were still serviceable. Measurements were taken of the insert diameter, flange, and outside diameter of each liner and were within specification. Cylinders 1-6 and cylinders 7-8 on the left and right banks respectively showed vertical scratches but were approved for continued use.

Uploaded by

esa masiv
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
515 views2 pages

Cylinder Liner Inspection Report

The cylinder liner inspection report found vertical scratches on several cylinders but determined the liners were still serviceable. Measurements were taken of the insert diameter, flange, and outside diameter of each liner and were within specification. Cylinders 1-6 and cylinders 7-8 on the left and right banks respectively showed vertical scratches but were approved for continued use.

Uploaded by

esa masiv
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 2

CYLINDER LINER INSPECTION REPORT

Customer :PT. SWARNADWIPA DERMAGA JAYA Job. No :_____________________________


Engine Model : QSK 60 G4 E.S.N : 33207894
C.P.L :_____________________________ Date : 27/10/2021
OEM : Application :
CYLINDER LINER
Remarks Code :
01 Insert Diameter for Vertikal Scrathes
x1 02 Flange for Cracks
x x2
03 Liner For Cracks
x3 04 Outside Diameter for Excessive Corrosion
y
Flange or Pitting

Specification
Min Max
CONDITION √ = Serviceable X = Unserviceable Inch Inch
mm 158.74 mm 158.78
RESULTS
Liner Position Liner
Cylinder # Flange CONDITION
X1 - X1 Y1 - Y2 X2 - X2 Y2 - Y2 X3 - X3 Y3 - Y3 Thickness

1 158.75mm 158.75mm 158.75mm 158.75mm 158.75mm 158.75mm


2 158.75mm 158.75mm 158.75mm 158.75mm 158.75mm 158.75mm Vertikal Scrathes
3 158.75mm 158.75mm 158.75mm 158.75mm 158.75mm 158.75mm
LB 4 158.75mm 158.75mm 158.75mm 158.75mm 158.75mm 158.75mm Vertikal Scrathes
5 158.75mm 158.75mm 158.75mm 158.75mm 158.75mm 158.75mm Vertikal Scrathes
6 158.75mm 158.75mm 158.75mm 158.75mm 158.75mm 158.75mm
7 158.75mm 158.75mm 158.75mm 158.75mm 158.75mm 158.75mm
8 158.75mm 158.75mm 158.75mm 158.75mm 158.75mm 158.75mm
Note: Untuk engine Inline cukup mengisi kolom LB
1 158.75mm 158.75mm 158.75mm 158.75mm 158.75mm 158.75mm
2 158.75mm 158.75mm 158.75mm 158.75mm 158.75mm 158.75mm
3 158.75mm 158.75mm 158.75mm 158.75mm 158.75mm 158.75mm
RB 4 158.75mm 158.75mm 158.75mm 158.75mm 158.75mm 158.75mm Vertikal Scrathes
5 158.75mm 158.75mm 158.75mm 158.75mm 158.75mm 158.75mm Vertikal Scrathes
6 158.75mm 158.75mm 158.75mm 158.75mm 158.75mm 158.75mm
7 158.75mm 158.75mm 158.75mm 158.75mm 158.75mm 158.75mm Vertikal Scrathes
8 158.75mm 158.75mm 158.75mm 158.75mm 158.75mm 158.75mm
COMMENTS:____________________________________________________________________________________
_______________________________________________________________________________________________
_______________________________________________________________________________________________

REPORTED BY, CHECKED BY, APPROVED BY,

YUDA GANTINA
MECHANIC CHIP ENGINEER OWNER
DATE: 10/27/2021 DATE: DATE:

You might also like