| 102 kW (137 HP) at 2000 rpm

| 14213 - 16273 kg
| 0.24 - 0.76 m³

DX140W-3 | Wheeled Excavator

 Technical specifications

Q Engine Q Hydraulic system

• Model The brain of the excavator is the e-EPOS (Electronic Power Optimizing
Doosan DL06KB System). It allows operation of the hydraulic system to be optimised
4-Cycle Water-Cooled, Variable Geometry Turbocharged, for all working conditions and minimises fuel consumption.
Common Rail Direct Injection, Exhaust Gas Recirculation The e-EPOS is connected to the engine’s electronic control unit (ECU)
• No. of cylinders via a data transfer link to harmonise the operation of the engine and
the hydraulic system.
6
• Rated power at 2000 rpm
• The hydraulic system allows independent or combined operations
101 kW (137 PS) (DIN 6271) • Two travel speeds offer either increased torque or high speed
101 kW (135 HP) (SAE J1349) • Cross-sensing pump system for fuel savings
102 kW (137 HP) (SAE J1995) • Auto deceleration system
• Max. torque at 1400 rpm • Four operating modes, four power modes
60 kgf/m (588 Nm) • Button control of flow in auxiliary hydraulic circuits
• Idle (low - high) • Computer-aided pump flow control
800 [± 25] - 2080 [±50] rpm
• Piston displacement • Maximum system pressure

5890 cm³ Implement (boom/arm/bucket): 380 kg/cm² [±5]

• Bore x stroke Work/travel: 350 kg/cm² [±5] / 370 kg/cm² [±5]
Swing: 275 kg/cm² [±5]
Ø 100 x 125 mm
Pilot: 40 kgf/cm²
• Starter
24 V / 6.0 kW
• Batteries / Alternator
Q Pumps
2 x 12 V, 150 Ah / 24 V, 80 A
• Air filter Pump Type Displacement
Max. flow Relief valve
@ 2000 rpm pressure
Double element and pre-filtered Turbo with automatic dust Tandem, Axial
Main (2) 85.0 cm³/rev. 2 X 170 l/min -
evacuation. piston
Filtration area 7.6 m² (outer), 1.4 m² (inner) Pilot Gear 10.7 cm³/rev. 24.1 l/min 40 kgf/cm²
Size (diameter x length) 279.4 mm x 489.5 mm Steering Gear 19.1 cm³/rev. 35.5 l/min 175 kgf/cm²
Brake Gear 7.3 cm³/rev. 13.6 l/min 160 kgf/cm²

Q Weights
Boom (mm) Arm (mm) C/W (t) Chassis - Front Chassis - Rear Weight Total Front Rear
2.2 Cradle Dozer 14213 5205 9008
1-piece boom (4400) 2100
2.2 Dozer Stab 15298 6073 9225
2.5 Cradle Dozer 14662 5410 9252
1-piece boom (4600) 2500
2.5 Dozer Stab 15747 6278 9469
2.5 Cradle Dozer 15128 4610 10518
2-piece boom (2000 + 3350) 2100 2.5 Dozer Stab 16213 5478 10735
2.5 Stab Dozer 16213 5959 10253
2.5 Cradle Dozer 15188 4848 10340
2-piece boom (2000 + 3350) 2500 2.5 Dozer Stab 16273 5716 10557
2.5 Stab Dozer 16273 6198 10075

Q Undercarriage Q Hydraulic cylinders

Very robust construction throughout. All welded structures designed Piston rods and cylinder bodies of high-strength steel.
to limit stresses. High-quality, durable materials. Lateral chassis welded Shock-absorbing mechanism fitted in all cylinders for shock-free
and rigidly attached to undercarriage. Heat-treated connecting pins. operation and extended piston life.
10.00-20-14PR (OTR) double tyres with tyre spacer or single tyres
18-19.5-16PR (optional). Heavy-duty front axle with automatic or Cylinders Quantity Bore x rod diameter x stroke (mm)
operator-controlled (on/off) front axle oscillation lock.
One-piece boom 2 110 x 75 x 1035

• Front axle oscillation Two-piece boom upper 2 110 x 75 x 975

Two-piece boom lower 1 140 x 85 x 720
+/- 7.94° with automatic ram lock
Arm - 4.4 boom 1 115 x 80 x 1092
Arm - 4.6 boom 1 115 x 80 x 1068
Q Brakes
Bucket 1 95 x 65 x 900
Dual multi-disc circuit with sintered metal discs for extended
service life. Braking system activated by a pump and Blade 2 100 x 60 x 204
accumulator circuits. Spring-applied, hydraulically released Stabilizer 2 110 x 70 x 438
parking brake mounted on the transmission shaft.

16
Q Swing mechanism Q Fluid capacities
• High-torque, axial piston motor with planetary reduction gear in oil • Fuel tank
bath 280 l
• Swing circle: single-row, shear type ball bearing with induction- • Cooling system (radiator capacity)
hardened internal gear 20 l
• Internal gear and pinion immersed in lubricant • Hydraulic oil tank
• Increased swing torque reduces swing time
102 l
• The swing brake for parking is activated by spring and released
• Engine oil
hydraulically
• Max. swing speed (Eff.=0.98): 0 to 11.4 rpm 22 l
• Max. swing torque (Eff.=0.78): 3744 kgf/m • Swing drive
2l
Q Drive • Front axle hub
2 x 2.5 l
The wheels are driven by an axial piston engine via a two-speed Power
• Rear axle hub
Shift transmission.
In additional to the two-speed Power Shift transmission, there is also 2 x 2.4 l
• Front axle case
an economy mode and a switch for the creep speed.
A button makes it possible to pass from high to low in work mode. 9l
• Rear axle case
• Travel speed 11.2 l
Two travel speed ranges offer a choice between increased • Transmission
torque or high speed. 2.5 l
High / Eco / Low / Creep
37 / 32 / 10 / 3.5 km/h Q Environment
• Maximum traction Noise levels comply with environmental regulations (dynamic values).
8.3 t
• Maximum gradeability • Noise level LwA
35° / 70% Guaranteed / measured: 102 dB(A) / 100 dB(A) (2000/14/EC)
• Turning radius • Operator LpA
With front: 7477 mm 69 dB(A) (ISO 6396)
Without front (Two-piece boom + 2.5 m arm): 6247 mm

Q Buckets

C/W 2.5 t

Width (mm) Boom: 4.6 m Boom: 4.4 m 2-piece boom

Bucket Capacity (m³)
Weight (kg)
Type SAE With Without Arm: Arm: Arm: Arm: Arm:
side cutters side cutters 2.1 m 2.5 m 2.1 m 2.1 m 2.5 m
0.59 1081 997 420 A A A A A
0.24 534 468 292 A A A A A
0.39 820 736 350 A A A A A
Normal 0.45 911 824 389 A A A A A
0.51 991 907 398 A A A A A
0.64 1167 1083 443 A A A A B
0.76 1220 1120 437 A B A B C
0.42 827 762 462 A A A A A
HD 0.49 913 848 497 A A A A A
0.54 981 916 517 A A A A A
Based on ISO 10567 and SAE J296, arm length without quick-coupler. For reference only.
A: Suitable for materials with a density less than or equal to 2100 kg/m³ / B: Suitable for materials with a density less than or equal to 1800 kg/m³
C: Suitable for materials with a density less than or equal to 1500 kg/m³

Q Digging forces (ISO)

1-piece boom: 4400 mm 1-piece boom: 4600 mm 2-piece boom: 4988 mm 2-piece boom: 4988 mm
Arm: 2100 mm Arm: 2500 mm Arm: 2100 mm Arm: 2500 mm
Bucket: 0.59 m³ Bucket: 0.59 m³ Bucket: 0.59 m³ Bucket: 0.59 m³

BUCKET t 10.00 / 10.57 10.00 / 10.57 11.08 / 11.72 11.08 / 11.72

(Normal/Press. Up) kN 98.0 / 103.6 98.0 / 103.6 108.6 / 114.9 108.6 / 114.9
ARM t 7.68 / 8.12 6.54 / 6.90 7.68 / 8.12 6.54 / 6.90
(Normal/Press. Up) kN 75.3 / 79.6 64.1 / 67.7 75.3 / 79.6 64.1 / 67.7

17
 Dimensions

A
I
E

D C
H
G
F

K J

Q Dimensions one-piece and two-piece boom

Boom length - mm 4400 (one-piece boom) 4600 (one-piece boom) 4988 (two-piece boom)
Arm length - mm 2100 2100 2500 2100 2500
A Shipping length - mm 7190 7470 7185 8005 7885
B Shipping width - mm 2500 2500 2500 2500 2500
C Shipping height (boom) - mm 3590 3430 3950 2725 3070
D Height over cab - mm 3065 3065 3065 3065 3065
E Counterweight swing clearance - mm 2200 2200 2200 2200 2200
F Ground clearance - mm 350 350 350 350 350
G Counterweight clearance - mm 1215 1215 1215 1215 1215
H Engine cover height - mm 2385 2385 2385 2385 2385
I Upper housing width - mm 2500 2500 2500 2500 2500
J Wheel base - mm 2800 2800 2800 2800 2800
K Tread width - mm 1944 1944 1944 1944 1944

Q Component weights

Item Remarks
Upperstructure without front - kg 7175 Including counterweight
Undercarriage - kg 4832 Including S/B, F-CR & R-DOZ
Front assembly - kg 2206
Counterweight - kg 2200 or 2500
Boom 4400 mm - kg 750
Arm 2100 mm - kg 375
Bucket - kg 408 0.59 m³
Boom cylinder (each) - kg 106
Arm cylinder - kg 151
Bucket cylinder - kg 87
Dozer blade - kg 672
Dozer blade cylinder (each) - kg 42
Stabilizer - kg 960
Stabilizer cylinder (each) - kg 74
Boom 4600 mm - kg 778
Arm 2500 mm - kg 418
Two-piece boom - upper / lower - kg 592 / 384
Two-piece boom cylinder - kg 150

18
Working range

Q Working range one-piece and two-piece boom

Boom length - mm 4400 (one-piece boom) 4600 (one-piece boom) 4988 (two-piece boom)
Arm length - mm 2100 2100 2500 2100 2500
A Max. digging reach - mm 7585 7765 8235 8210 8670
B Max. digging depth - mm 4490 4620 5020 5025 5455
C Max. digging height - mm 8195 8340 8850 9060 9565
D Max. dump height - mm 5905 6060 6510 6715 7175
E Min. digging reach - mm 2340 2500 2665 2650 2850

19
 Lifting capacities

Ground Line
Centerline of rotation

Standard configuration – One-piece boom

Boom: 4400 mm • Arm: 2100 mm • W/O Bucket • Counterweight: 2200 kg Units: 1000 kg

A (m) Chassis Frame 1.5 3.0 4.5 6.0 Max. lift

B (m) Attachment A (m)
R- Dozer Up 3.60* 3.60* 2.82* 2.82*
6.0 4.71
F-Dozer + R-Stabilizer Down 3.60* 3.60* 2.82* 2.82*
R-Rear Dozer Only Up 5.65* 3.67 2.64* 2.50
4.5 5.73
F-Dozer + R-Stabilizer Down 5.65* 5.65* 2.64* 2.64*
R-Rear Dozer Only Up 9.54* 6.37 6.62* 3.49 4.14* 2.28 2.69* 2.14
3.0 6.24
F-Dozer + R-Stabilizer Down 9.54* 9.54* 6.62* 5.85 4.14* 3.75 2.69* 2.69*
R-Rear Dozer Only Up 10.03* 5.82 7.02 3.30 4.44 2.21 2.94* 2.03
1.5 6.36
F-Dozer + R-Stabilizer Down 10.03* 10.03* 7.47* 5.62 5.60* 3.67 2.94* 2.94*
R-Rear Dozer Only Up 10.78* 5.66 6.87 3.18 4.39 2.16 3.48* 2.11
0 (Ground) 6.12
F-Dozer + R-Stabilizer Down 10.78* 10.78* 7.69* 5.49 4.78* 3.62 3.48* 3.48*
R-Rear Dozer Only Up 8.50* 8.50* 9.94* 5.68 6.85 3.16 4.73* 2.46
-1.5 5.46
F-Dozer + R-Stabilizer Down 8.50* 8.50* 9.94* 9.94* 6.89* 5.47 4.73* 4.14
R-Rear Dozer Only Up 6.66* 5.85 4.62* 3.64
-3.0 4.17
F-Dozer + R-Stabilizer Down 6.66* 6.66* 4.62* 4.62*

Option 1 – One-piece boom

Boom: 4600 mm • Arm: 2500 mm • W/O Bucket • Counterweight: 2500 kg Units: 1000 kg

A (m) Chassis Frame 1.5 3.0 4.5 6.0 Max. lift

B (m) Attachment A (m)
R- Dozer Up 2.76* 2.76*
7.5 3.93
F-Dozer + R-Stabilizer Down 2.76* 2.76*
R-Rear Dozer Only Up 3.97* 3.97* 2.26* 2.26*
6.0 5.55
F-Dozer + R-Stabilizer Down 3.97* 3.97* 2.26* 2.26*
R-Rear Dozer Only Up 4.66* 3.93 3.53* 2.51 2.13* 2.13*
4.5 6.44
F-Dozer + R-Stabilizer Down 4.66* 4.66* 3.53* 3.53* 2.13* 2.13*
R-Rear Dozer Only Up 8.93* 6.81 6.26* 3.72 4.76 2.44 2.14* 1.96
3.0 6.90
F-Dozer + R-Stabilizer Down 8.93* 8.93* 6.26* 6.15 4.83* 3.95 2.14* 2.14*
R-Rear Dozer Only Up 7.23* 3.49 4.65 2.34 2.28* 1.87
1.5 7.01
F-Dozer + R-Stabilizer Down 7.23* 5.89 5.50* 3.84 2.28* 2.28*
R-Rear Dozer Only Up 8.24* 5.94 7.16 3.35 4.57 2.27 2.58* 1.92
0 (Ground) 6.79
F-Dozer + R-Stabilizer Down 8.24* 8.24* 7.62* 5.72 5.60* 3.77 2.58* 2.58*
R-Rear Dozer Only Up 6.30* 6.30* 10.39* 5.94 7.10 3.30 4.56 2.26 3.21* 2.17
-1.5 6.20
F-Dozer + R-Stabilizer Down 6.30* 6.30* 10.39* 10.39* 7.16* 5.67 5.01* 3.75 3.21* 3.21*
R-Rear Dozer Only Up 7.85* 6.07 5.41* 3.37 4.29* 2.87
-3.0 5.11
F-Dozer + R-Stabilizer Down 7.85* 7.85* 5.41* 5.41* 4.29* 4.29*

1. Lifting capacities are in compliance with ISO 10567:2007(E).

2. The load point is at the end of the arm.
3. * = The nominal loads are based on hydraulic capacity.
4. The nominal loads shown do not exceed 75% of tipping loads or 87% of hydraulic lifting capacity.
5. For lifting capacity with bucket, simply subtract the actual weight of the bucket from the values. : Rating over front
6. The configurations indicated do not necessarily reflect the standard equipment of the machine. : Rating over side or 360°

20
 Ground Line
Centerline of rotation

Option 2 – Two-piece boom

Boom: 4988 mm • Arm: 2500 mm • W/O Bucket • Counterweight: 2500 kg Units: 1000 kg

A (m) Chassis Frame 1.5 3.0 4.5 6.0 Max. lift

B (m) Attachment A (m)
R- Dozer Up 3.33* 3.33* 2.82* 2.82*
R- Dozer Down 3.33* 3.33* 2.82* 2.82*
7.5 4.69
F-Dozer + R-Stabilizer Down 3.33* 3.33* 2.82* 2.82*
4-Stabilizer Down 3.33* 3.33* 2.82* 2.82*
R-Rear Dozer Only Up 4.13* 4.07 2.80* 2.52 2.40* 2.40*
R-Rear Dozer Only Down 4.13* 4.13* 2.80* 2.79 2.40* 2.40*
6.0 6.10
F-Dozer + R-Stabilizer Down 4.13* 4.13* 2.80* 2.80* 2.40* 2.40*
4-Stabilizer Down 4.13* 4.13* 2.80* 2.80* 2.40* 2.40*
R-Rear Dozer Only Up 4.78* 3.92 4.27* 2.50 2.26* 1.95
R-Rear Dozer Only Down 4.78* 4.35 4.27* 2.77 2.26* 2.17
4.5 6.92
F-Dozer + R-Stabilizer Down 4.78* 4.78* 4.27* 4.05 2.26* 2.26*
4-Stabilizer Down 4.78* 4.78* 4.27* 4.27* 2.26* 2.26*
R-Rear Dozer Only Up 5.83* 3.65 4.72* 2.39 2.26* 1.73
R-Rear Dozer Only Down 5.83* 4.07 4.72* 2.66 2.26* 1.93
3.0 7.35
F-Dozer + R-Stabilizer Down 5.83* 5.83* 4.72* 3.93 2.26* 2.26*
4-Stabilizer Down 5.83* 5.83* 4.72* 4.65 2.26* 2.26*
R-Rear Dozer Only Up 6.87* 3.38 4.63 2.27 2.38* 1.66
R-Rear Dozer Only Down 6.87* 3.79 5.18* 2.54 2.38* 1.85
1.5 7.45
F-Dozer + R-Stabilizer Down 6.87* 5.81 5.18* 3.80 2.38* 2.38*
4-Stabilizer Down 6.87* 6.87* 5.18* 4.51 2.38* 2.38*
R-Rear Dozer Only Up 7.09 3.22 4.53 2.19 2.64* 1.70
R-Rear Dozer Only Down 7.39* 3.63 5.44* 2.45 2.64* 1.90
0 (Ground) 7.24
F-Dozer + R-Stabilizer Down 7.39* 5.63 5.44* 3.71 2.64* 2.64*
4-Stabilizer Down 7.39* 6.82 5.44* 4.42 2.64* 2.64*
R-Rear Dozer Only Up 8.72* 5.75 7.03 3.18 4.50 2.17 3.15* 1.89
R-Rear Dozer Only Down 8.72* 6.60 7.20* 3.59 5.25* 2.43 3.15* 2.12
-1.5 6.70
F-Dozer + R-Stabilizer Down 8.72* 8.72* 7.20* 5.58 5.25* 3.68 3.15* 3.15*
4-Stabilizer Down 8.72* 8.72* 7.20* 6.77 5.25* 4.39 3.15* 3.15*
R-Rear Dozer Only Up 8.66* 5.89 6.13* 3.25 4.33* 2.39
R-Rear Dozer Only Down 8.66* 6.75 6.13* 3.66 4.33* 2.68
-3.0 5.71
F-Dozer + R-Stabilizer Down 8.66* 8.66* 6.13* 5.66 4.33* 4.04
4-Stabilizer Down 8.66* 8.66* 6.13* 6.13* 4.33* 4.33*

Option 3 – Two-piece boom

Boom: 4988 mm • Arm: 2100 mm • W/O Bucket • Counterweight: 2500 kg Units: 1000 kg

A (m) Chassis Frame 1.5 3.0 4.5 6.0 Max. lift

B (m) Attachment A (m)
R- Dozer Up 3.85* 3.85*
7.5 R- Dozer Down 3.85* 3.85* 3.89
F-Dozer + R-Stabilizer Down 3.85* 3.85*
R-Rear Dozer Only Up 4.66* 4.00 3.25* 2.85
6.0 R-Rear Dozer Only Down 4.66* 4.43 3.25* 3.16 5.52
F-Dozer + R-Stabilizer Down 4.66* 4.66* 3.25* 3.25*
R-Rear Dozer Only Up 6.57* 6.57* 5.17* 3.86 4.60* 2.47 3.11* 2.20
4.5 R-Rear Dozer Only Down 6.57* 6.57* 5.17* 4.29 4.60* 2.74 3.11* 2.44 6.42
F-Dozer + R-Stabilizer Down 6.57* 6.57* 5.17* 5.17* 4.60* 4.01 3.11* 3.11*
R-Rear Dozer Only Up 6.19* 3.60 4.75 2.38 3.17* 1.92
3.0 R-Rear Dozer Only Down 6.19* 4.02 4.94* 2.65 3.17* 2.14 6.88
F-Dozer + R-Stabilizer Down 6.19* 6.06 4.94* 3.92 3.17* 3.17*
R-Rear Dozer Only Up 7.12* 3.36 4.63 2.28 3.42* 1.83
1.5 R-Rear Dozer Only Down 7.12* 3.77 5.33* 2.54 3.42* 2.04 6.99
F-Dozer + R-Stabilizer Down 7.12* 5.78 5.33* 3.80 3.42* 3.05
R-Rear Dozer Only Up 7.10 3.24 4.55 2.21 3.82 1.88
0 (Ground) R-Rear Dozer Only Down 7.45* 3.65 5.47 2.47 3.93* 2.11 6.76
F-Dozer + R-Stabilizer Down 7.45* 5.64 5.49* 3.73 3.93* 3.16
R-Rear Dozer Only Up 9.93* 5.84 7.05* 3.23 4.55 2.21 4.37 2.14
-1.5 R-Rear Dozer Only Down 9.93* 6.70 7.05* 3.63 5.07* 2.47 4.83* 2.39 6.17
F-Dozer + R-Stabilizer Down 9.93* 9.93* 7.05* 5.63 5.07* 3.73 4.83* 3.59

21
 Undercarriage

344

463 2800 878

652

472

463 2800 128

2495

858 1700 1100 1068

3406

3631 4957

344

1048 2800 878

858 2800 878

4996 4957

22
Standard and optional equipment

Q Standard equipment Q Optional equipment

Engine Cab & Interior
DOOSAN DL06KB turbocharged, Common Rail direct injection, EU Stage IIIB compliant Diesel MP3/USB radio or MP3/USB radio with CD player
engine combined with e-EPOS System Safety
Automatic engine warm-up system FOGS cab - top and front cab guards (ISO 10262)
Fuel pre-filter with water separator sensor Side view camera
Diesel particulate filter (DPF) 2 Lateral safety bars (ISO 2867:2011)
Fuel and Engine speed (RPM) control dial Other
Auto-idle Hydraulic piping for crusher, quick coupler, clamshell, tilting and rotating buckets
Hydraulic system Additional filter for breaker piping
Boom and arm flow regeneration One-piece boom 4600 mm – arm: 2500 mm
Swing anti-rebound valves Two-piece boom 4988 mm (lower : 2000 mm, upper : 3350 mm) – arm: 2500 mm or 2100 mm
Spare ports (valve) Counterweight 2500 kg
Breaker piping Doosan buckets: full range of GP, HD & Rock buckets
Cylinder cushioning & contamination seals Doosan breaker and Doosan quick-couplers
Control of auxiliary hydraulic flow and pressure from the display panel Upper guard for front window
Cab & Interior Lower guard for front window
Roll Over Protective Structure (ROPS) Floating boom function
Pressurised, sound-insulated and CabSus mounted cab Wiper for lower front window
Heated, adjustable air suspension seat with adjustable headrest and armrest Double pump flow
Jog shuttle switch Air compressor
Air conditioning with climate control Telescopic rotating beacon
4 speed (high, eco, low, creep) with cruise control Bio oil
One-touch power boost Automatic lubrication system
Attachment management system Homologation preparation (depending on countries)
Pull-up type front window with sun roller blind and removable lower front window Microphone
Ceiling light Undercarriage
Intermittent upper windshield wiper Single tyres 18-19, 5 16 PR
Multiple storage compartments (e.g. document holder under seat) and coat hook Lockable tool box (right side)
Rain visor 2 or 4 independent stabilizers with cylinder protection
Flat, spacious, easy-to-clean floor Front parallel dozer blade
Cigarette lighter and ashtray
Cup holder and magazine rack
Anti-theft protection (control panel password)
Hot and cool box
7” (18 cm) LCD colour monitor panel with digital speed display
Automatic rear window defroster
4 operating modes & 4 working modes
Adjustable tiltable steering column
Radio-ready and remote radio On/Off switch
12 V spare power socket
Serial communication port for laptop PC interface
Adjustable PPC wrist control levers for arm, boom, bucket and swing, with sliding
proportional control for attachments, FNR switch and auxiliary hydraulic buttons
USB port
DPF regeneration switch
Sliding left front and rear windows with lock Microphone
Travel pedals and hand levers For extra safety on crowded
Master key worksites.
Safety
Boom, arm, dozer blade and stabilizer cylinder safety valves
Overload warning device
Large handrails and step
Rotating beacon
Rear view camera
Punched metal anti-slip plates
Hydraulic safety lock lever
Safety glass
Hammer for emergency escape
Right and left rearview mirrors
Emergency engine stop and hydraulic pump control switches
Emergency auxiliary FNR travel selector switch
Reinforced cast steel pivot points 2 additional lateral safety bars Air gun and compressor
Mirror on counterweight With raised height for increased Clears dust inside cab and pump
Halogen work lights (2 front frame, 4 front cab-mounted, 2 rear cab-mounted, safety. compartment. Cleans filter, radiator
2 boom-mounted and 1 rear side) and oil cooler. Plugs available
Street lights with LED stop lamps + LED blinker with side reflex reflectors in cab, pump compartment and
Reverse travel alarm (with On/Off switch) battery box.
Parking brake and cab swing lock pin
Engine overheat and restart prevention system
Other
One-piece boom 4400 mm – arm: 2100 mm
Counterweight 2200 kg
Powershift transmission
Auto shut-off fuel filler pump
Double element air cleaner
Dry type pre-cleaner
Dust screen for radiator/oil cooler
Separated engine hoods with gas spring. DPF hood screwed & protected
Upperstructure maintenance compartment doors and fuel cap lockable
Self-diagnostic function
Battery (12 V x 2, 150 Ah) with cut-off switch and alternator (24 V, 80 A) Doosan buckets Doosan breakers and quick-
Electric horn A range of dependable new couplers
Toolkit and spare parts for first service Doosan buckets is available to Doosan provides the tough,
Remote greasing for swing circle and workgroup pivot points cover several applications. reliable equipment you need
Guards for boom lights for demolition work.
Undercarriage
Front cradle and rear parallel dozer blade
Double tyres 10-20 14 PR
3 front axle oscillation lock modes (On/Off/Auto)
Piston rod protection of stabilizer cylinders Some of these options may be standard in some markets. Some of these options may
Lockable tool box (left side) not be available for certain markets. Please check with your local DOOSAN dealer for
Rear & front chain tightening eyes more information about availability or to adapt your machine to your application needs.

23
Doosan Infracore
The pulse of transformation

Pantone 871 C

Pantone Black 7 C

Pantone 7505 C

Construction Equipment Machine Tools Engines

The spirit of challenge and innovation has led Doosan. We started out as a small store in Seoul in 1896 and have expanded into a global company.
Today we are engaged in the infrastructure support business (ISB), which encompasses industrial facilities, machinery, heavy equipment and
construction. You can also see the Doosan brand in various other industries.

You are invited to take a closer look at the new world that is being built by Doosan, visit us at:
www.doosaninfracore.com and www.doosanequipment.eu

Doosan Infracore Construction Equipment

Specifications and design are subject to change without notice. Pictures of Doosan products may show other than standard equipment.
A partner you can trust

Finance
your
ambitions

www.doosanequipment.eu
Financial Solutions Always a dealer near you Parts & Service
Doosan Infracore Financial Services (DI FS) Our well-developed dealer network has the • Complete parts & service support for
is specialised in creating financing solutions knowledge and experience to take the best all Doosan products
to meet a wide variety of needs. care of our Doosan customers. No matter • Highest quality genuine parts
Contact your local dealer for more information. where you are, you’ll get the service you • Large, dedicated staff of factory-trained
expect - and can rely on! aftermarket professionals in the field

www.doosanequipment.eu

©2013 DOOSAN D 4400991-EN (02-13) Doosan Infracore Construction Equipment - Drève Richelle 167 - B-1410 Waterloo, Belgium