ENGINEERING/INSTALLATION SECTION: F-4

STANDARDS A097-01-16-46-LS-02 Rev.0

(STATIC EQUIPMENT) Page 1 of 4

CLUSTER – 7 WELL
PLATFORM PROJECT

ENGINEERING/INSTALLATION
STANDARDS
(STATIC EQUIPMENT)

PROJECT : CLUSTER – 7 WELL PLATFORM PROJECT

OWNER : O.N.G.C.

CONSULTANT : ENGINEERS INDIA LTD.

JOB NO. : A097

0 29.11.10 ISSUED FOR BIDS RS DBA DBA

Rev. Prepared Checked Approved
Date Purpose
No by by by

Format No. EIL-1641-1924 Rev.1 Copyright EIL – All rights reserved

 ENGINEERING/INSTALLATION SECTION: F-4
STANDARDS A097-01-16-46-LS-02 Rev.0
1 (STATIC EQUIPMENT) Page 2 of 4

CLUSTER – 7 WELL
PLATFORM PROJECT

LIST OF ENGINEERING/INSTALLATION STANDARDS

1. VESSELS

Rev. No. Of
SL.NO TITLE STANDARD NO.
No Sheets
1 Vessel Tolerances 7-12-0001 4 2
2 Support for horizontal vessel 7-12-0002 4 1
3 Wooden pillows for saddle support. 7-12-0003 4 1
4 Skirt base details 7-12-0004 5 1
5 Skirt opening details 7-12-0005 4 2
6 Angle leg support 7-12-0006 4 2
7 Pipe leg support 7-12-0007 4 1
8 Bracket support for vertical vessels 7-12-0008 4 1
9 Manhole with hinged cover 7-12-0009 5 2
10 Manhole with davit 7-12-0010 5 2
11 Ladder rungs for manhole/demister 7-12-0011 4 1
12 Retaining plate 7-12-0012 4 1
13 Nozzle reinforcement and projection 7-12-0013 4 1
14 Pad nozzles for vessels 7-12-0014 4 1
15 Standard bolt hole orientation 7-12-0015 4 1
16 Alloy liner details. 7-12-0016 5 2
17 Sight glasses for pressure vessels. 7-12-0017 4 2
18 Internal flanges 7-12-0018 4 1
19 Vortex breakers 7-12-0019 4 1
20 Inlet deflector baffle 7-12-0020 4 1
21 Support ring & bolting bars. 7-12-0021 4 1
22 Support ring sizes for packed tower. 7-12-0022 4 1
23 Pipe davit 7-12-0023 5 3
24 Lifting lug 7-12-0024 6 1
25 Fire proofing and insulation supports 7-12-0025 4 2
26 Earthing lug 7-12-0026 4 1
27 Name plate 7-12-0027 4 1
28 Manufacturer name plate 7-12-0028 4 1
29 Bracket for name plate 7-12-0029 4 1
30 Name plate for small equipments. 7-12-0030 3 1
31 Details of Forged Nozzles 7-12-0031 3 1
32 Supports for internal feed pipe 7-12-0032 3 2
33 Hot insulation supports for horizontal 7-12-0033 3 1
vessel.
34 Pipe davit support detail for cold insulated 7-12-0034 3 1
vessels.
35 Typical detail of wire mesh demister and 7-12-0036 3 4
its supports
36 SR Nozzle Necks 7-12-0037 2 1

Format No. EIL-1641-1924 Rev.1 Copyright EIL – All rights reserved

 ENGINEERING/INSTALLATION SECTION: F-4
STANDARDS A097-01-16-46-LS-02 Rev.0
1 (STATIC EQUIPMENT) Page 3 of 4

CLUSTER – 7 WELL
PLATFORM PROJECT

2. TANKS

REV. No. of
SL.NO DESCRIPTION STANDARD NO.
NO sheets
1 Earth connections 7-13-0001 5 1
2 Anchor chair. 7-13-0002 5 1
3 Hot insulation supports for storage tanks. 7-13-0003 6 3
4 Storage tank steam coil (tank ≤ 5m). 7-13-0004 6 5
5 Jet mixer. 7-13-0005 5 1
6 Level indicator supports. 7-13-0006 5 1
7 Gauge hatch with cover. 7-13-0007 5 6
Foam system (cone roof/ floating roof 5 3
8 7-13-0008
tanks)
9 Drain outlet. 7-13-0009 5 1
10 Caged ladder for fixed roof tank. 7-13-0010 5 1
11 Name plate. 7-13-0012 3 1
Spiral stairway and hand railing for cone 3 7
12 7-13-0013
roof / floating roof tanks.
Still-well for temperature element (cone 3 1
13 7-13-0023
roof tanks).
14 Deflector plate for cooling system. 7-13-0039 2 1
Stringer type spiral stairway and hand 1 8
15 7-13-0040
railing for cone roof / floating roof tanks
Roof Structure for Cone Roof Tanks- 2 1
16 7-68-0661
General Notes
Structural arrangement of cone roof - 2.5 2 1
17 7-68-0663
m < dia < 6.0 m

3. SHELL & TUBE HEAT EXCHANGERS

No. of
SL.NO DESCRIPTION STANDARD NO. REV.NO
sheets
1 Part Details 7-15-0001 3 2
2 Type of non-standard gaskets 7-15-0002 3 3
3 Support for vertical exchangers 7-15-0003 3 1
4 Support for horizontal exchangers 7-15-0004 3 2
5 Support for Horizontal stack units 7-15-0005 3 2
6 Tube hole for preparation and roller 3 1
7-15-0006
expanding
7 Sliding/deflector strips to tube sheet 3 1
7-15-0007
welding details
8 Eye bolt detail 7-15-0008 3 1
9 Method of fastening nuts to tie rods 7-15-0009 3 1
10 Jack screw tapping arrangement 7-15-0010 3 1
11 Fixing detail of dowel pins 7-15-0011 3 1
12 Couplings & Plugs 7-15-0012 3 2
13 Lifting lug detail 7-15-0013 3 1
14 Davit for heat exchangers 7-15-0014 3 3

Format No. EIL-1641-1924 Rev.1 Copyright EIL – All rights reserved

 ENGINEERING/INSTALLATION SECTION: F-4
STANDARDS A097-01-16-46-LS-02 Rev.0
1 (STATIC EQUIPMENT) Page 4 of 4

CLUSTER – 7 WELL
PLATFORM PROJECT

No. of
SL.NO DESCRIPTION STANDARD NO. REV.NO
sheets
15 Earthing lug 7-15-0016 3 1
16 Name plate for shell and tube exchangers 7-15-0017 3 1
17 Warning plates 7-15-0018 3 2
18 Tolerances for shell & tube heat 3 3
7-15-0019
exchangers
19 Detail of sealing strip assembly for two 3 1
7-15-0021
pass shell

4. AIR COOLED HEAT EXCHANGERS

No. of
SL.NO DESCRIPTION STANDARD NO. REV.NO
sheets
1. Tube hole for preparation and roller 3 1
7-15-0006
expanding
2. Half tube supports 7-15-0101 3 1
3. Flanged header and cover plate detail 7-15-0103 3 1
4. Tapped header and cover plate detail 7-15-0104 3 1
5. Frame standard - stationary header fixing 7-15-0105 2 1
6. Frame end top. 7-15-0106 2 1
7. Frame standard tube support top. 7-15-0107 2 1
8. Frame standard - floating header support. 7-15-0108 2 1
9. Frame bracing detail. 7-15-0109 2 1
10. Tube support bottom beam detail. 7-15-0110 2 1
11. Tube access plug 7-15-0111 3 1
12. Jack screws (cover type header). 7-15-0113 3 1
13. Lifting lug for cover plate 7-15-0114 3 1
14. Frame standard lifting lug. 7-15-0115 2 1
15. Fabrication Tolerances (Air Cooled Heat 7-15-0116 3 3
Exchangers)
16. Name plate 7-15-0117 2 1
17. Tolerances and general notes for 7-15-0118 3 1
gaskets.
18. Tube bundle frame detail (equal tube in 7-15-0121 2 1
each row).
19. Tube bundle frame detail with spacer. 7-15-0122 2 1
20. Tube bundle frame detail (unequal tubes 7-15-0123 2 1
in rows).
21. Stiffening strips for nozzles less than 3" 7-15-0142 3 1
NB

Format No. EIL-1641-1924 Rev.1 Copyright EIL – All rights reserved