RG058
RG-Cables acc. to MIL-C-17F and MIL-C-17G
Application
see product overview
Standards
acc. to MIL-C-17F, MIL-C-17G
Flame resistance
acc. to IEC 60332-1
Construction
Inner conductor stranded copper wires, tinned, diameter 0.90 0.01 mm
Insulation PE, diameter 2.95 0.05 mm
Outer conductor
Copper braid tinned, 96% optical coverage
Sheath PVC, altern. FRNC, diameter 4.95 ± 0.10 mm
black
Mechanical properties
Minimum bending radius without load 5 x outer diameter
with load 10 x outer diameter
Temperature during operation -40° C to + 85° C
during installation -15° C to + 55° C
Corrosivity only for FRNC type IEC 60754-2
Electrical properties at 20°C
Loop resistance ≤ 50 Ω
Characteristic impedance 50 Ω ± 2 Ω
Velocity ratio 66 %
Mutual capacitance 100 nF/km
Transfer impedance 36 mΩ/m
Operating voltage 1.8 kV rms
Test voltage Inner/Outer conductor 5.4 kV rms
hf23e
DRAKA | RG www.prysmiangroup.com Version 1.0 | 19.08.2008
Page 1 of 2
RG058
Electrical data at 20°C
Frequency Attenuation Max. power rating Return loss
(MHz) (dB/100m) (Watts) (dB)
(at ambient temperature several peaks are allowed
25°Cand max. inner
conductor temperature of
70°C)
nominal maximum
10 4.2 750 Frequency
(MHz)
100 15.7 230 50-100 28
200 23.0 180 100-300 27
400 34.5 110 300-500 26
1000 60.0 65 500-1000 25
All other requirements acc. to MIL-C-17F, MIL-C-17G
Technical data
Product Desig- Type Brand Outer Weight Standar Drum Gross Copper Tensile
code nation name diameter d size weight content force
delivery
length
mm kg/km m *PWD/rin kg
g
0.9Lz/ M17/28- 1000/10 400/120/
1002717 2YCY 4.95 37 39/3.7 20.4 120
2.95z RGO58 0 280
M17/28-
0.9Lz/ 1000/10 400/120/
1002919 2YCH RG058 4.95 38 40/3.8 20.4 120
2.95z 0 280
FRNC
*PWD (Plywood drum)
Product Code Table
Product Description Product Code PG Reference Code PG Part Number
RG058 MIL-C-17F 60014295 60014295
RG058 MIL-C-17F 500DW 1002717-00500DW 60014295 60014296
RG058 MIL-C-17F 1000DW 1002717-01000DW 60014295 60014298
© PRYSMIAN GROUP 2008, All Rights Reserved
All sizes and values without tolerances are reference values. Specifications are for product as supplied by Prysmian Group: any
modification or alteration afterwards of product may give different result.
The information contained within this document must not be copied, reprinted or reproduced in any form, either wholly or in part, without
the written consent of Prysmian Group. The information is believed to be correct at the time of issue. Prysmian Group reserves the right to
amend this specification without prior notice. This specification is not contractually valid unless specifically authorised by Prysmian Group.
hf23e
DRAKA | RG www.prysmiangroup.com Version 1.0 | 19.08.2008
Page 2 of 2
