Scribd
Upload
257 views1 page

K-Punch Hole Punching Tool

The K-Punch is a modular hole punching tool that can punch single or multiple oriented holes in a single run in tubing and casing sizes ranging from 2-7/8" to 9-5/8". It connects directly to the K-Set Setting Tool and can punch between 1-8 holes depending on the tubing size and punch hole diameter. The tool is suitable for punching holes in J55, L80, and P110 tubing and casing grades.

Uploaded by

Wahiba Energy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
257 views1 page

K-Punch Hole Punching Tool

The K-Punch is a modular hole punching tool that can punch single or multiple oriented holes in a single run in tubing and casing sizes ranging from 2-7/8" to 9-5/8". It connects directly to the K-Set Setting Tool and can punch between 1-8 holes depending on the tubing size and punch hole diameter. The tool is suitable for punching holes in J55, L80, and P110 tubing and casing grades.

Uploaded by

Wahiba Energy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

www.omega-intervention.

com

K-Punch Well Intervention

Hole Punching Tool


The K-Punch is a modular hole punching tool. Features
It is combinable with the K-Set Setting Tool and can
be configured to punch single or multiple oriented • Single punch and multi-punch
holes in a single run. • Oriented punching
• Connects directly to the K-Set Setting Tool
The K-Punch can punch holes in a range of tubing
and casing sizes from 2-7/8” to 9-5/8”.

Technical Specifications
Table of physical properties of the K-Punch
Tubing Size 2.875” 3.500” 4.500” 5.500” 7.000” 9.625”
Tubing Grade J55 L80 P110 J55 L80 P110 J55 L80 P110 J55 L80 P110 J55 L80 P110 J55 L80 P110
Tubing Weight (lb/ft) 6.4 to 8.6 7.7 to 12.7 12.6 20 23 47 to 53
Punch Tool OD 2.160” 2.590” to 2.740” 3.600” 4.500” 5.750” 8.250”
Running/Setting Tool 2.125” 2.125”/2.720 ALL ALL 3.600” 3.600”
Punch Hole Size Range 0.375” to
0.375” to 0.563” 0.375” to 0.715” 0.375” to 0.715” 0.375” to 0.715” 0.375” to 0.625”
[1] 0.625”
No. Holes In Single
Up to 8 Up to 6 Up to 5 Up to 5 Up to 3 Up to 3
Run [2]

[1] Punch hole size limited by tubing material.


[2] Number of holes limited by punch hole size. For example 3.500” tubing is limited to 3 holes at 0.715” diameter.

Omega Well Intervention Ltd, Omega House, Kirkhill Road, Kirkhill Industrial Estate, Dyce, Aberdeen, AB21 0GQ
Tel: +44 (0)1224 772744, Email: info@omega-intervention.com ED-012 R2.1
www.omega-intervention.com Rev 3 01/02/2022

You might also like