Scribd
Upload
54 views2 pages

Omega Hydraulic Water Injection Valve

The document discusses an Omega water injection valve used in water injectors and converted oil producers. The valve acts as a fluid barrier and prevents sand ingress when injection stops. It incorporates a hydraulic dampening system and anti-rotation locks to prevent damage during operation.

Uploaded by

Wahiba Energy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
54 views2 pages

Omega Hydraulic Water Injection Valve

The document discusses an Omega water injection valve used in water injectors and converted oil producers. The valve acts as a fluid barrier and prevents sand ingress when injection stops. It incorporates a hydraulic dampening system and anti-rotation locks to prevent damage during operation.

Uploaded by

Wahiba Energy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

www.omega-intervention.

com

Water Injection Well Intervention

Valve
Although the Omega Water Injection Valve is typically Applications
used in water injectors, it is also ideal for use where
• Deep set barrier in injection wells.
oil producers are being converted to injectors due to
• Can be installed below plugging devices.
failed safety valves.

The Injection Valve acts as a fluid barrier and in


certain scenarios it can prevent the ingress of sand
to the well when injection is stopped.

The valve is unique within the market place,


incorporating a hydraulic dampening system to deal
with flow-induced vibration. The dampening system
also allows the valve to ‘soft-close’ preventing any
Benefits
damage to the seal faces when injection ceases. • Longer operating life.
Anti-rotation locking rings secure each of the • Reduced redress costs.
threaded connections within the tool ensuring there • Provides high injection rates with low pressure drops.
is no potential for back-out during flowing conditions.

The Injection Valve is spring-biased into the closed


position and opens when injection fluid is pumped
down the tubing. The large annular flow ports
maximise available flow area through the valve whilst
minimising the pressure drop across it.

When pumping is stopped the spring forces the


plunger upward to seat on the seal face, preventing
any fluid from below the valve flowing back into the
tubing above.

Features
•H ydraulic dampening system to prevent unwanted
vibration.
•S oft closure feature to extend plunger seal life.
• Debris tolerant seal system.
• Anti-rotation connections.
• Large annular flow ports.
• Metal To Metal Seal increases durability.
Water Injection Valve

Technical Specifications
Valve Size 3.60” 5.50”
Max Flow Area 5.52 in² 11.50 in²
Material Full Range Of Materials Available Full Range Of Materials Available
Pressure Rating 5,000 psi 5,000 psi

Other sizes and materials available on request.

Omega Well Intervention Ltd, Omega House, Kirkhill Road, Kirkhill Industrial Estate, Dyce, Aberdeen, AB21 0GQ
Tel: +44 (0)1224 772744, Email: info@omega-intervention.com ED-012 R2.1
www.omega-intervention.com Rev 8 01/02/2022

You might also like