Aircraft Warning Light Systems

Product Catalogue
 solutions for Aircraft Warning Light Systems

Solutions for Aircraft

Clampco Sistemi: solutions for Aircraft Warning Light Systems
Warning Light Systems
Clampco Sistemi
 CLAMPCO SISTEMI Plant Accessories

AIRCRAFT WARNING LIGHT SYSTEMS

general overview
Clampco Sistemi designs, manufactures and supplies complete
i i Medium intensity double obstruction lights i
em em em
Aircraft Warning Light Systems (AWLS) intended for
t t st
day/twilight/night lighting of extensive obstacles, such as Low intensity double obstruction lights
s s i
Si
chimneys, buildings, telecommunication towers, etc.
Si S light
Medium intensity single obstruction
o
Our products comply with:
o o
c c
• I.C.A.O. – Annex 14, chap. 6 ‘Visual Aids for denoting Obstacles’
p p p cobstruction light
Low intensity single

m m am
• F.A.A. – AC 70/7460-1J and AC 150/534-43E ‘Obstruction
a a Control board
l
Cl Cl
Marking Lights’.
CPhotoelectric switch
The AWLS configuration diagrams shown below are an example of Junction box
night-time signalling according to the total height of the obstacle.
Cables
Configurations with different types and number of lights can be
i i i
em em em
tailored to Customer needs.

sintdetail in the following pages are: st

108 - 213 m
s t
The main components described
S i S i Si
o
• obstruction lights (art. SEG......)
o o
• control board c
pc pc
H
(art. SEQC......)
p switch SECTION

a m kit comprising cables (art. SCCE.....),

• photoelectric (art. SEI......)
am a m
l l Cl
• installation clamps,
Cjunction boxes (art. SCSD....) and mountingChardware (art.
SCSG...)
• lightning arrester modules (art. SEQOPT.....).

i i i
em em em
The following can be provided on request:
t
• special accessories such as external solar power supply, UPS
s s t s t
3/4 Hi
Si
units and special mounting hardware, etc
Si S
c o
• customized configurations such as explosion proof and special
c o c o SECTION

p
IP protection level enclosures.
p p
a m a m a m
Cl Cl
The electrical characteristics of the system vary according to the
locally available power supply voltage indicated by the Customer
Cl
and to the selected warning lights.
45 - 108 m

i i i
t em H
t em 1/2 H
t em
s s s
Si Si Si
SECTION SECTION

c o c o c o
p p p
a m a m a m
Cl 0 - 45 m Cl Cl

H 1/2 H 1/4 H
i i i
em em em
SECTION SECTION SECTION

s t s t s t
Si Si Si
c o c o c o
p p p
a m a m a m
Cl Cl Cl

Clampco Sistemi - tel. +39 0432 830240 fax +39 0432 839934 www.clampco.it clampco@clampco.it - AWLS Catalogue
 CLAMPCO SISTEMI Plant Accessories

AIRCRAFT WARNING LIGHT SYSTEMS

art. SEG...... low intensity, omnidirectional, fixed red obstruction light
The low intensity fixed red obstruction light is available in two
i i i
em em em
configurations: single (art. SEGS.....) and double (art. SEGD.....). B

s t s t s t
BULB
Si Si Si
Double beacon configuration

c o
Light characteristics as ICAO Type A or B are obtained using two
different bulb types: c o c o
Dimensions Weight
p p A p
m
• LED array powered at constant current by an electronic m m mm Kg

C la
regulator
C la C la A: 750 6.3
• fluorescent lamp: powered by an electronic ballast (starter) B: 370
C: 200
integrated in the bulb (230 Vac models) or enclosed within the
junction box (12, 24 ,48 Vdc models). C
art. SEGD....
i i i
em em em
In all Clampco Sistemi double bulb devices (main + stand-by)
t
each bulb is powered by its own electronic circuit. Internal
s s t s t
Si
electronic circuits and lamp starters are tropicalized.
Si Si
Single beacon configuration

co co o
Dimensions Weight
OPERATING CONDITIONS
p p A
pc
a m100% with condensation am am
• air temperature: from -30˚C to +55˚C mm Kg

l l Cl
A: 680 4.1
• moisture:
C level can be
•Cprotection level: IP 55. Greater protection
B: 120
C: 200
provided on Customer request. C
B
Devices in this family are intended for light operation during night- art. SEGS....
time and twilight: the expected life of the bulb may decrease when
i i i
em em em
operated under direct exposure of the cap to intense solar radiation.

s t s t s t
MECHANICAL STRUCTURE
Si Si Si
o
• transparent polycarbonate cap, unbreakable (crash test energy =
c c o c o
p
20 J) and flame retardant
p p
m
• cap holder made of die cast aluminium alloy
a a m a m
Cl Cl
• supporting tubular structure made of hot-dip galvanized steel
• junction box made of die cast aluminium alloy
Cl
• coating: red polyester powder finish.

OPTIONS AVAILABLE
i i i
em em em
• hot-dip galvanized steel standard mounting hardware
(art. SCSG.....)
s t s t art. SEGS..E.. s t
Si Si Si
art. SEGS..L../RH
• for light mounted on irradiating masts, add /CAGE to the
o
obstruction light code (art. SEGD23L10/CAGE)
c c o c o
p
• external cable for electrical connection of the frame to local
p p
All the devices in this family comply with the applicable European
m
ground (art. KTAC.....)
a a m a m
Community Directives on Electromagnetic Compatibility 89/336 EEC

Cl Cl
• reinforced hardware, add /RH to the obstruction light code
(art. SEGS23L10/RH).
Cl
and Low Voltage (safety) 73/23 EEC and amendment 93/68 EEC.

LOW INTENSITY OBSTRUCTION LIGHT CODE SYNTAX

i i i
SEG
te
m S 12 Ls t m
e 10 / 1 t em
is s
S Si Si
co c o c o
p Bulb Nominal
p Bulb type Light emission
p
Option available

am m am
configuration Voltage
a l
Cl Cl
S Single 12 12 Vdc L Led 10 >10 cd 1 Two bulbs in one cap
D Double 24
48
24Vdc
48Vdc
E Fluorescent 32 >32 cdC CAGE RH
Faraday cage
Reinforced Hardware
23 230Vac

Clampco Sistemi - tel. +39 0432 830240 fax +39 0432 839934 www.clampco.it clampco@clampco.it - AWLS Catalogue
 CLAMPCO SISTEMI Plant Accessories

AIRCRAFT WARNING LIGHT SYSTEMS

art. SEG...... low intensity, omnidirectional, fixed red obstruction light

Article i Bulb Bulb Beacon Power i M.T.B.F. Regulation Light i

t em type
t em Supply Mean Time
Beetween Failure
Compliancy
t em
Emission

Si
s
SEGS12L10
n°
Si
s V hours
I.C.A.O typeSA
is cd
>10
Led arrays 1 ˚ 12Vdc 100.000
c o SEGS24L10 Led arrays c1o ˚ 24Vdc 100.000 c otype A
I.C.A.O >10
p SEGS48L10 Led arrays p 1 48Vdc 100.000 pI.C.A.O type A >10
am am am
˚

Cl
SEGS23L10
l
SEGD12L10 C Led arrays
Led arrays 1
2
˚ 230Vac
12Vdc
l
100.000
C
I.C.A.O type A
I.C.A.O type A
>10
>10
˚ 100.000
SEGD24L10 Led arrays 2 ˚ 24Vdc 100.000 I.C.A.O type A >10
SEGD48L10 Led arrays 2 ˚ 48Vdc 100.000 I.C.A.O type A >10
SEGD23L10 Led arrays 2 ˚ 230Vac 100.000 I.C.A.O type A >10
i i i
em t em t em
Article s tBulb s s
i Si Si
Bulb Beacon Power M.T.B.F. Regulation Light
S
type Supply Mean Time
Beetween Failure
Compliancy Emission

o chourso c o
pc
n° V cd
SEGS12L32 Led arrays 1 ˚ 12Vdc p100.000 I.C.A.O type B/FAA type L810 p
>32

am
SEGS24L32 Led arrays 1 ˚ a m
24Vdc 100.000 I.C.A.O type B/FAA type L810
a m >32
C l
SEGS48L32
SEGS23L32
Led arrays
Led arrays
1 ˚ C l 48Vdc
230Vac
100.000 I.C.A.O type B/FAA type L810
Cl >32
>32
1 ˚ 100.000 I.C.A.O type B/FAA type L810
SEGD12L32 Led arrays 2 ˚ 12Vdc 100.000 I.C.A.O type B/FAA type L810 >32
SEGD24L32 Led arrays 2 ˚ 24Vdc 100.000 I.C.A.O type B/FAA type L810 >32
SEGD48L32 Led arrays 2 i ˚ 48Vdc 100.000 i
I.C.A.O type B/FAA type L810 >32 i
SEGD23L32 Led arrays
t em
2 ˚ 230Vac 100.000
em
I.C.A.O type B/FAA type L810
t
>32
t em
s s s
Si Si Si
c o Article Bulb Bulb
c o
Beacon Power M.T.B.F. c o
Regulation Light
p type p Supply Mean Time
Beetween Failure p
Compliancy Emission

a m a mn° a m
Cl Cl Cl
V hours cd
SEGD12L10/1 Led arrays 2 ˚ 12Vdc 100.000 I.C.A.O type A >10
SEGD24L10/1 Led arrays 2 ˚ 24Vdc 100.000 I.C.A.O type A >10
SEGD48L10/1 Led arrays 2 ˚ 48Vdc 100.000 I.C.A.O type A >10
SEGD23L10/1 Led arrays 2 ˚ 230Vac 100.000 I.C.A.O type A >10
i i i
em t em t em
s tBulb s s
Article
S i
Bulb
type
Beacon Power
Supply
M.T.B.F.
Mean Time Si Regulation
Compliancy
Light
Emission Si
co n° V c o
Beetween Failure

hours c
cd
o
p p p
m
SEGS23E10 Fluorescent 1 ˚ m
230Vac 10.000 I.C.A.O type A
m >10

Cl
a
SEGD23E10 Fluorescent 2 ˚
C la230Vac 10.000 I.C.A.O type A
C l a >10
SEGS23E32 Fluorescent 1 230Vac 10.000 I.C.A.O type B/FAA type L810 >32
˚
SEGD23E32 Fluorescent 2 230Vac 10.000 I.C.A.O type B/FAA type L810 >32
˚

i Beacon i i
em m em
Article Bulb Bulb Power M.T.B.F. Regulation Light

t
type
tV e
Supply Mean Time
Beetween Failure
Compliancy
t
Emission
s s s
Si Si Si
n° hours cd
SEGS12E10 Fluorescent 1 12Vdc 10.000 I.C.A.O type A >10
c o SEGD12E10 Fluorescent 2 c o ˚
12Vdc 10.000 c o
I.C.A.O type A >10
p p ˚
p
m SEGS48E10
m
Fluorescent 1 ˚ 48Vdc 10.000
m I.C.A.O type A >10

C la SEGD48E10
C la 2
Fluorescent ˚ 48Vdc 10.000
C l a I.C.A.O type A >10
SEGS12E32 Fluorescent 1 ˚ 12Vdc 10.000 I.C.A.O type B/FAA type L810 >32
SEGD12E32 Fluorescent 2 ˚ 12Vdc 10.000 I.C.A.O type B/FAA type L810 >32

Clampco Sistemi - tel. +39 0432 830240 fax +39 0432 839934 www.clampco.it clampco@clampco.it - AWLS Catalogue
 CLAMPCO SISTEMI Plant Accessories

AIRCRAFT WARNING LIGHT SYSTEMS

art. SEG.23F60 medium intensity, omnidirectional, flashing red obstruction light
B
The medium intensity flashing red obstruction light is available in
i i i
em em em
two configurations: single (art. SEGS23F60) and double
t t st
(art. SEGD23F60).
s s i
Si Si S configuration
Double beacon
BULB
o o o
c c pc
Dimensions Weight
Light characteristics as ICAO Type B are obtained using xenon
p p A
am am
discharge lamp. Powered by an electronic circuit at 230 Vac,
a m mm Kg

Cl Cl Cl
enclosed within the junction box. A:800 6.5
In all Clampco Sistemi double bulb devices (main + stand-by) B:120
C:200
each bulb is powered by its own electronic circuit. Internal
electronic circuits and lamp starters are tropicalized.

i i C i
em em em
OPERATING CONDITIONS art. SEGD23F60
t
• air temperature: from -30˚C to +55˚C
s s t s t
Si
• moisture: 100% with condensation
Si Si
o
• protection level: IP 55. Greater devices can be provided on
o o beacon configuration
pc pc p cDimensions Weight
Single
Customer request.
m
Devices in this family are intended for light operation during
a a m a m
Cl Cl Cl
night-time and twilight: the expected life of the bulb may decrease A mm Kg
when operated under direct exposure of the cap to intense solar A:730 4.2
radiation. B:370
C:200
MECHANICAL STRUCTURE
i i i
em eB m em
• red polycarbonate cap, unbreakable (crash test energy = 20 J)
C
t
and flame retardant. The cap is provided with a Fresnel lens to t s t
is
ensure the required light radiation pattern
S S is art. SEGS23F60
Si
co
• cap holder made of die cast aluminium alloy
co c o
p
• supporting tubular structure made of hot-dip galvanized steel
p p
am
• junction box made of die cast aluminium alloy
am a m
Cl
• coating: red polyester powder finish.
Cl Cl
OPTIONS AVAILABLE
• hot-dip galvanized steel standard mounting hardware
(art. SCSG.....)
i i i
em em em
• for light mounted on irradiating masts, add /CAGE to the
t
obstruction light code (example: art. SEGD23F60/CAGE)
s s t s t
Si
• external cable for electrical connection of the frame to local
Si Si
o
ground (art. KTAC.....)
c c o c o
p
• reinforced hardware, add /RH to the obstruction light code
p p
m
(art. SEGD23F60/RH).
a a m a m
Cl Cl Cl
All the devices in this family comply with the applicable European art. SEGD23F60/RH
Community Directives on Electromagnetic Compatibility 89/336 EEC
and Low Voltage (safety) 73/23 EEC and amendmend 93/68 EEC.
i i i
em
tBeacon em
tEffective light t em
Article Bulb
s
Bulb Power M.T.B.F Regulation
s Flash
s
Si Si Si
supply Mean Time Compliancy frequency
type intensity
Between Failure

o n° V hours
c o cd fpm
c o
SEGS23F60 p c
Xenon 1 ˚ 230Vac 5.000
p I.C.A.O. type B.
I.C.A.O. type B. >2000 20/60
p
a m Xenon
SEGD23F60 2 230Vac m
5.000 >2000 20/60
a m
C l ˚

C la Cl
XENON BULB

Clampco Sistemi - tel. +39 0432 830240 fax +39 0432 839934 www.clampco.it clampco@clampco.it - AWLS Catalogue
 CLAMPCO SISTEMI Plant Accessories
AIRCRAFT WARNING LIGHT SYSTEMS

art. SEGS..L3K medium intensity, omnidirectional, flashing red obstruction light

The medium intensity flashing red obstruction light is available in
i i i
em em em
single configuration (art. SEGS..L3K).

s t s t s t
BULB
Si Si Si
c o
Light characteristics as ICAO Type B are obtained using LED array
bulb. Powered by an electronic circuit at 24, 48 Vdc or 230 Vac c o c o
p p p
m
according to the model.
a a m a m
Cl Cl Cl
Internal electronic circuits and lamp starters are tropicalized.
Single beacon can be configured as an ‘main’ or ‘stand-by’ device.

OPERATING CONDITIONS
• air temperature: from -30˚C to +55˚C
i i i
em em em
• moisture: 100% with condensation
• protection level: IP 65.
s t s t s t
Si Si Si
MECHANICAL STRUCTURE
o o o
pc
• transparent polycarbonate cap, unbreakable (crash test energy
pc pc
m
= 20 J) and flame retardant. The cap is lens shaped to ensure
a a m a m
Cl Cl Cl
the required light radiation pattern.
• cap holder, top cover and frame structure made of die cast
aluminium alloy. Through anodic oxidation process the
components are coated by a layer of aluminium oxide (colours
black).
i i i
em em em
• plug-in waterproof external connector for fast installation.

s t s t s t
Si Si Si
A
OPTIONS AVAILABLE
c o c o c o
p
• flash synchronization
p p
m
• other colours of LED sources
a a m a m
Cl
• hot-dip galvanized steel standard mounting hardware
(art. SCSG.....)
Cl Cl
• for light mounted on irradiating masts, add /CAGE to the
B
obstruction light code (example: art. SEGS23L3K/CAGE)
• external cable for electrical connection of the frame to local
i i i
em em em
ground (art. KTAC.....)
t
• radiation shield, add /SHIELD to the obstruction light code
s s t s t
(art. SEGS23L3K/SHIELD).
Si Si Dimensions Weight
Si
c o c o mm
c o
Kg
p
All the devices in this family comply with the applicable European
p A:635 p 18.0

am am
Community Directives on Electromagnetic Compatibility 89/336 EEC
a
B:204 m
Cl Cl
and Low Voltage (safety) 73/23 EEC and amendmend 93/68 EEC.
Cl

i i i
em t em t em
Article
s ttype
Bulb Bulb Power M.T.B.F
sCompliancy
Regulation Effective light
s
Flash
i i Si
Mean Time
supply intensity frequency
S Between Failures
S
c o n° V
c o
hours
c o cd fpm

pSEGS23L3K Led array 1

p
230Vac 100.000 I.C.A.O. type B/FAA lamp type L-864 p 20/60
>2000

a m SEGS48L3K Led array 1 48Vdc m m

a 100.000 I.C.A.O. type B/FAA lamp type L-864 l a >2000 20/60
100.000 I.C.A.O. type B/FAA lamp type L-864 >2000

Cl SEGS24L3K Led array 1

C l
24Vdc
C 20/60

Clampco Sistemi - tel. +39 0432 830240 fax +39 0432 839934 www.clampco.it clampco@clampco.it - AWLS Catalogue
 CLAMPCO SISTEMI Plant Accessories

AIRCRAFT WARNING LIGHT SYSTEMS

art. SEGS23.2K medium intensity, 120° horizontal beam, red obstruction light
The medium intensity obstruction lights is available in single
i i i
em em em
configuration (art. SEGS23.2K). Multiple light units are used to
t
achieve a horizontal coverage of 360 degrees.
s s t s t
Si Si Si
BULB
c o
Light characteristics as ICAO Type B or C are obtained using two c o c o
p p p APPLICATION

am am am
different bulb types:

Cl Cl Cl
• xenon discharge lamp. Powered by an electronic circuit at 230 Vac
• long life halogen lamp.
Single beacon can be configured as an ‘main’ or ‘stand-by’ device.

OPERATING CONDITIONS
i i i
em em em
• air temperature: from -30˚C to +55˚C
• moisture: 100% with condensation
s t s t s t
• protection level: IP 66.
Si Si Si
o o o
pc
Devices in this family are intended for light operation during
pc pc
m m
night-time and twilight: the expected life of the bulb may decrease
a a a m
Cl Cl Cl
significantly when operated under direct exposure to intense solar
radiation. SUPPLY CONFIGURATION

MECHANICAL STRUCTURE
• die cast alluminium body and frame
i i i
em em em
• reflector in pure aluminium sheet, polished and anodized
t
• tempered glass with silicone rubber gaskets
s s t s t
Si
• red filter compliant with CIE red chromatic boundary
SA i Si
o
• bracket made of galvanized steel with index for vertical
c c o c o
orientation
p p p
m
• coating: grey polyester powder finish.
a a m a m
Cl
OPTIONS AVAILABLE
Cl Cl
B C
• external cable for electrical connection of the frame to local
ground (art. KTAC.....)
• for light mounted on flare stack stainless steel radiation
i i Dimensions Weight i
em em em
shield, add /SHIELD to the obstruction light code (art.
SEGS23.2K/SHIELD).
s t s t mm Kg
s t
Si Si Si
A:675 23
B:650

c o
All the devices in this family comply with the applicable European
c o C:370
c o
p
Community Directives on Electromagnetic Compatibility 89/336 EEC
p p
m
and Low Voltage (safety) 73/23 EEC and amendmend 93/68 EEC.
a a m a m
Cl Cl Cl

i i i
Article Bulb
t
type em
Bulb Power
supply
M.T.B.F
Mean Time
Regulation
t
compliancyem Effective
light intensity
Flash
frequency t em
is s s
Si Si
Between Failures

S xenon V hours cd fpm

co
SEGS23B2K 1 230Vac 5.000
c o Medium Intensity >2000
c o 20/60

p p I.C.A.O. type B/FAA lamp type L-864 p

a m SEGS23C2K halogen 1 230Vac
a m
3.000 Medium Intensity
a m
>2000 Steady

Cl Cl I.C.A.O. type C
Cl

Clampco Sistemi - tel. +39 0432 830240 fax +39 0432 839934 www.clampco.it clampco@clampco.it - AWLS Catalogue
 CLAMPCO SISTEMI Plant Accessories

AIRCRAFT WARNING LIGHT SYSTEMS

art. SEGS2320K medium intensity, 120° horizontal beam, flashing white obstruction light
The medium intensity obstruction lights is available in single
i i i
em em em
configuration (art. SEGS2320K). Multiple light units are used to
t
achieve a horizontal coverage of 360 degrees.
s s t s t
Si Si Si
BULB
c o
Light characteristics as ICAO Type A (day/twilight/night) is c o c o
p p p APPLICATION
m
obtained using xenon discharge lamp. Powered by an electronic
a a m a m
Cl Cl Cl
circuit at 230 Vac, enclosed within the external power supply box.
Single beacon can be configured as an ‘main’ or ‘stand-by’ device.
The light intensity is controlled by a photo electric switch (art.
SEI.....) connected to control board (art. SEQC.....) that changes
the intensity when ambient light changes.
i i i
e m e m e m
st st
OPERATING CONDITIONS [See t
SEGS23.2K]
i s i i
S S S
o o o
pc pc pc
am am am
art. SEGS2320K/SHIELD

C l C l C l

Article Bulb Bulb Power M.T.B.F Regulation Effective Flash

Mean Time
type supply compliancy light intensity frequency
iV
Between Failures
hours i cd fpm i
SEGS2320K xenon
t
m
e1 230Vac 5.000 Medium Intensity
m
t etype L-865 >20.000 day/twilight 20/60
t em
is s s
Si Si
I.C.A.O. type A/FAA lamp > 2.000 night
S
co c o c o
p p p
m
art. SEGS24LWT m m
flashing red obstruction light for wind turbine
a
C la C la Cl
BULB
Light characteristics as National regulation for marking
aeronautical obstacles, is obtained using LED array bulb, powered
by an electronic circuit at 24 Vdc.
i
Single beacon can be configured as an ‘main’ or ‘stand-by’ device. i i
em
Internal electronic circuits and lamp starters are tropicalized.
t t em t em
APPLICATION

s s s
Si
OPERATING CONDITIONS [See SEGS..L.K] Si Si
c o c o c o
p p p
a m a m a m
Cl Cl Cl
Dimensions Weight A

mm Kg
A:320 8.0 i i art. SEGS24LWT
i
B:204
t em t em t em
s s s
Si B
Si Si
c o c o c o
p p p
a m Article Bulb Bulb
a
Power m
M.T.B.F Regulation Effective light
a m Flash

Cl Cl Cl
type supply Mean Time Compliancy frequency
intensity
Between Failures

n° V hours cd
SEGS24LWT Led array 1 24Vdc 100.000 BMVBW Type W red >170 1s On - 0.5s Off / 1s On - 1.5s Off

Clampco Sistemi - tel. +39 0432 830240 fax +39 0432 839934 www.clampco.it clampco@clampco.it - AWLS Catalogue
 CLAMPCO SISTEMI Plant Accessories

AIRCRAFT WARNING LIGHT SYSTEMS

art. SEQC...... control board
Clampco Sistemi control boards operate the whole system,
i i i
em em em
whatever the number of obstruction lights. The board has the
following functions:
s t s t s t
Si
• protected power supply to obstruction lights and photoelectric
Si Si
switch
c o
• electronic conversion from locally available mains to the AWLS c o c o
p p p
m
operating voltage (the requested AC-DC, DC-DC, DC-AC
a a m a m
Cl Cl Cl
converter is installed inside the control board on a DIN rail)
• automatic check of the bulb status, switching of the stand-by bulb
• generation of visual alarms (front panel pilot lamps) and remote
transmission of URGENT and NON URGENT alarms (COM, NC,
NO dry contacts on screw terminals)
i i i
em em em
• easy checking procedure of the whole system by means of front
t
panel switches and buttons accessible to the operator.
s s t s t
Si Si Si
o
The following special functions may be present if required:
o c o
pc
• double photoelectric sensor (art. SEQC....2)
pc p
SUPPLY CONFIGURATION
m m am
• overvoltage protection (surge) of incoming electric cables
a a l
Cl Cl
(art. SEQOPT....)
• synchronisation of all the flashing obstruction lights in the system C
(art. SEQC.....-S)
• on-board or external Uninterruptible Power Supply
(art. SEQC.....-U).
i i i
t em
The above functions are associated with special Clampco Sistemi t em t em
s s s
Si
‘plug-in’ modules which are easy to replace without tools.
Si Si
o
The dimension of the control board depends on the AWLS
c c o c o
configuration.
p p p
m
According to the installation environment the control board
a a m a m
Cl
electrical circuit is enclosed in a housing:
• IP 55 coated steel box
Cl Cl
• IP 65 polyester box (higher IP protection level on request)
• IP 65 stainless steel box (higher IP protection level on request).
Front door can be supplied with transparent window or blind
i i i
em em em
(recommended for outdoor installation).

s t s t s t
Si Si Si
c o o
CONTROL BOARD CODE SYNTAX
c c o
p p p
Cl
a m
SEQC 1 C l
m
a1 01 1 C-l a mU
Nominal Nominal Number of 1 single photoelectric switch
Mains Light Option available
Obstruction lights 2 double photoelectric switch
Voltage Voltage
1 1 i 1 i U i
Ups (uninterruptible power supply)
em
12 Vdc 12 Vdc
2 24 Vdc 2 em
24 Vdc
t 2
t em S Flashing synchronization module
t
3 48 Vdc 3s 48 Vdc 3 s s
4 60 Vdc
Si4 60 Vdc 4
Si Si
5
6 c o
24 Vac
48 Vac
5
6
24 Vac
48 Vac
5
6 c o c o
7 p110 Vac 7 110 Vac 7 p p
a m8 230 Vac 8 230 Vac
a m
8
a m
Cl 9 380 Vac
Cl 9
10
Cl
11
12

Clampco Sistemi - tel. +39 0432 830240 fax +39 0432 839934 www.clampco.it clampco@clampco.it - AWLS Catalogue
 CLAMPCO SISTEMI Plant Accessories

AIRCRAFT WARNING LIGHT SYSTEMS

art. SEQOPT..... overvoltage arrester option

i
This board houses one lightning arrester module for each wire
i i
t em
connecting the obstruction lights to the control board.
The protection devices (varistors) comply with part 1 of standard t em t em
s s s
VDE 0110: Si Si Si
o
• nominal discharge current: 15 kA
c c o c o
p
• activation time: <25ns p p
m m
• nominal voltage: UB =100 V for L type (art. SEQOPT...L) and art. SEGS..... m art. SEGD.....

C la
UB = 280 Vac for H type (art. SEQOPT...H).
C la C la
H type or L type must be used according to the nominal voltage
of the obstruction lights. These modules are ‘plug-in’, easy to art. SCSD.....

i
replace without tools: when faulty, a small window on the module
i J-BOX i
turns to red.
t em t em t em
s s s
Si
These devices are a secondary level protection to lightning (i.e.
Si Si
o
they do not discharge the lightning current directly to ground).
c c o c o
p
The arrester board is an adequate protection for the internal p p
m m
circuits of the control board (and for all other circuits connected
a a a m
Cl Cl
to it), in case of overvoltage induced by the main lightning current
in the nearby conductors.
art. KTF...... grounding kit.
Connects conducting screen Cl
of the cable to outdoor
ground pile shoe
art. SEQC.....

i i i
em em em
OVERVOLTAGE ARRESTER BOARD CODE SYNTAX

s t s t t
sart.
Si Si S i SEQOPT04H
SEQOPT 03 L o o
co p pc pc
a m a m
l am
Cl Number of
Modules
Cl
Beacon
Operating C INSTALLATION EXAMPLE
INTERNAL OVERVOLTAGE ARRESTER BOARD
Voltage
03 3 L <100 V
05 5 H >100 V To the same protective earth
.. .. as the control board
12 12 i i i
t em t em t em
s s s
Si Si Si
c o c o c o
p p p
m a m a m
art.l a
C SCTP.....
Cl Cl protection tube

When voltage along the electric wires is greater than 100 Volt, to
comply with International Safety Standards, all cables must be
protected by special metallic conduit.
i i i
em em em
Article Description

s t s t s t
Si i
S SCTPZ0025 i
S (L=1m, 25 mm)
Hot-dip galvanized protection tube
art. SCTPF0025
o o SCTPF0025 Flexible protection o
tube (L=1m, 25mm)
c c pselfclocking connection
art. SCTPZ0025
p p SCTPZZ025 Tube-tube

am am SCTPZF025
a m tube self locking connection
Tube-flexible
l
Cl Cl
art. SCTPZF025

SUPPLY CONFIGURATION C

Clampco Sistemi - tel. +39 0432 830240 fax +39 0432 839934 www.clampco.it clampco@clampco.it - AWLS Catalogue
 CLAMPCO SISTEMI Plant Accessories

AIRCRAFT WARNING LIGHT SYSTEMS

art. SEI...... photoelectric switch
This device is installed outdoors near the control board to
i i
PHOTO ELECTRIC SWITCH CODE SYNTAX
i
em em em
determine the operating mode of the system (night/day). It has a
t st st M
photoelectric threshold adjustable between 2 and 200 lux,
factory set at 20 lux.
Si
s
SSEI
i 2 230AC
S i
• single c o
It is available in two configurations:
c o c o
p p p
m m am
• double (hot stand-by independent unit) for a more reliable AWLS.
a a Version
l Power Option

Cl Cl
In the latter case the failure of one of the independent circuits is supply available
recognised by the control board as a NON-URGENT alarm. C
1 single 12Vdc M metallic box
2 double 24Vdc Empty plastic box
OPERATING CONDITIONS 48Vdc
• according to the installation environment the photo electric 60Vdc
i i 24Vac i
em em em
switch is enclosed in a metallic (art. SEI...../M) or plastic
48Vac
housing (art. SEI.....)
s t s t 110Vac
s t
Si
• air temperature: from -30˚C to +55˚C
Si 230Vac
Si
o
• moisture: 100% with condensation
o o
pc
• protection level: IP 55. Greater protection level can be
pc pc
m
provided on Customer request.
a a m a m
Cl Cl Cl
Metallic box Plastic box
The SEI...... photoelectric switch is fully compatible with any type Dimensions Weight Dimensions Weight
SEQC..... control board provided that the model with compatible mm g mm g
supply voltage is selected. A:117 800 A:110 250
B:142 B:132
i C:80 i C:65 i
t em t em t em
s s s
Si Si Si
c o c o B C
c oB C
p p p
a m a m a m
Cl Cl A
Cl A

i i art. SEI2.....
i
em em em
art. SEI1230AC/M

s t s t
i st
art. SCCE..... Si Si S
electric cables
c o
All cables supplied with Clampco Sistemi AWLS are flame c o c o
Fixing of cables to structures can be achieved by Clampco Sistemi
p p p
a m a m
retardant, PVC insulated, suitable for outdoor/indoor installation m
cable clamps (see products www.clampco.it).
a
Cl Cl Cl
(temperature range: -35°C to 80°C).

The following cables are used for the required connections. Type
and length of cables are agreed with the Customer according to Article Description

the dimensions of the obstacle and the selected AWLS:

i
• Connection of the lights to the control board: cables with 3, i i
t em
4, 7, 10, 12 or 16 conductors (1.5 or 2.5 mm2). This cable has
t em
SCCES0325 N1VC4V-K (3 x 2.5 mm2)
t em
s sSCCES0415 s
FG70H2R (4 x 1.5 mm2)
Si i Smmi )
a copper screen under the external insulating jacket.
• Connection of the photoelectric switch to the control board: S SCCES0725 N1VC4V-K (7 x 2.5 2

c o
cables with 4 conductors (1.0 mm2). The cables fit both c o SCCES1015
c ox 1.5 mm )
FG70H2R (10 2

p p SCCES1215 p (12 x 1.5 mm )

FG70H2R 2

am am
double and single Clampco Sistemi photoelectric switches
SCCES1625 a m
N1VC4V-K (16 x 2.5 mm ) 2

Cl Cl Cl
(art. SEI......).
SCCE00410 N1VV-K (4 x 1.0 mm2 )
• Connection of the control board to mains: cables with 3
SCCE00325 N1VV-K (3 x 2.5 mm2)
conductors (2.5 mm2).

Clampco Sistemi - tel. +39 0432 830240 fax +39 0432 839934 www.clampco.it clampco@clampco.it - AWLS Catalogue
 CLAMPCO
SITETOOLS SISTEMI
Radio PlantAccessories
Station Accessories

AIRCRAFT WARNING LIGHT SYSTEMS

art. SCSG..... mounting hardware
This is the optional fixing hardware for all Clampco Sistemi
i i i
em m em
obstruction lights. It is made of two parts of welded steel, hot-dip
t
galvanized. It is supplied complete with two stainless steel t e A t
s s s
Si
threaded bars, nuts and washers.
Si Si
o
According to the model, this support is compatible with tube or
c c o c o

B
‘L’ section of different dimensions.
p p p
m
4 nuts and bolts (stainless steel, M10) are included with the
a a m a m
Cl Cl Cl
obstruction light.
Different obstruction light fixing hardware can be agreed with our
sales office.

C
i i D i
t em t e m
art. SCSG00120
C t em
s s s
Si Si S iD
o o oart. SCSG00230
pc pc pc
a m a m a m
Cl Cl Article
Cl
Dimensions Usable pipe
diameter
Usable
L-section
A B C D
mm mm mm mm mm mm
SCSG00120 120 180 190 300 50-120 50-120
i i i
em m em
SUPPLY CONFIGURATION SCSG00230 120 180 250 300 50-230 50-160

t t e t
s s s
Si Si Si
art. SCSD.....o
c o c o Junction box
pc p
It is made of die cast aluminium boxes; all cable conduit glands are 168 p
m m a m Ø

C la C
according to the cable or conduit. The junction boxes are
la
sized to guarantee waterproof and dust proof characteristics,
Cl
11
4
mm

complete with terminal strip, with identification of the terminals

as indicated on the supplied wiring diagram.

i i i
192

t em t em t em
s s s
Si Si Si
c o c o c o
p p p
m
aSUPPLY a m a m
l Cl Cl
CONFIGURATION
C
JUNCTION BOX CODE SYNTAX

SCSD m i O k x m
yi z i
t e t e Note: k=x+y+z
t em
is is s
S
Gland type Number of S
Number of glands for Number of glands for Si
Number of glands for
co ways
co
cable Type 1 cable Type 2 o
cable Type 3
c
p O cable 2 p 1 1 p 1
am T conduit 3
am 2 2
a m 2

Cl Cl Cl
4 3 3 3
5 4 4 4
6 5 5 5
6 6 6

Clampco Sistemi - tel. +39 0432 830240 fax +39 0432 839934 www.clampco.it clampco@clampco.it - AWLS Catalogue
 CLAMPCO SISTEMI Plant Accessories

AIRCRAFT WARNING LIGHT SYSTEMS

art. EEx-d enclosures explosion proof accessories

Clampco Sistemi provides Aircraft Warning Light Systems in
i i i
em em em
Explosion Proof version in compliance with Customer
requirements. t t Obstruction Light
s t
is
Select the AWLS from the item list in this catalogue and indicate
S S is EExd Housing
Si
co
to our sales office which of the system components must be
explosion proof for each explosion proof component indicate the co c o APPLICATION
p p p
requested:
a m a m a m
Cl Cl Cl
Execution, Type, Temperature class, IP protection level (for
OBSTRUCTION LIGHT CONTROL BOARD
example EEx-d, IIB, T5, IP55) EEx HOUSING EEx HOUSINGS
450 200
Enclosures are made of copper free aluminium alloy, epoxy
coating. On request Clampco Sistemi provides armoured wire
i i i
em em em
cable and glands.

350

400 mm
s t s t s t
Si
In some cases for protection of the electrical cables, flexible or
Si Si
o
rigid conduits can be used. To get a complete conduit system
o o
pc
design, please provide our sales office with the necessary
pc pc
m m
information on the conduit path and drawings of your structures.
a a
PHOTOCELL SENSOR
a m
Cl Cl Cl
EEx HOUSING
155 130 250 120
Control Board
Dimensions according to the AWLS
EExd Housing
Photoelectric switch
180

EExd Housing

i i i
art. SEGSPTL.. t em t em
power transmission overhead line obstruction light t em
s s s
Si
The power transmission overhead line obstruction light extracts Si Si
c o
energy from the magnetic field surrounding the power distributionc o c o
wire. p p p
a m a m a m
Cl Cl Cl
Weighing about 5 kg and with overall dimensions of 150x150x350 mm, Power Line
SEGSPTL.. is easy to install on the power line due to its compact
and light design and its convenient locking system.
APPLICATION
It can be directly clamped and fixed to the high voltage line
conductor using only one hand tool. The compatible HV cable
i
diameter range is from 10 to 38 mm. Compatible line voltage is up i
INSTALLATION EXAMPLE i
em
to 400 kV(50 Hz). An AC 60 Hz version is available on request.
t t
art. SWLAOCL32 em t em
power distribution

s s s
overhead line

Si
Obstuction light is fitted with Clampco LED array bulbs which Si Si
c o
combine extremely long life (100 000 hours duty) with the high c o c o
p
efficiency of ultrabright red LEDs. p p
am am a m
l
Cdevice is night-time activated by an internal C
The
l
photosensor. Cl
OPERATING CONDITIONS
art. SEGSPTL32
• air temperature: from -30˚C to +55˚C
• moisture: 100% with condensation i i i
em
• protection level: IP 55. Greater protection level can be provided
t t em t lightem
s s i sEffective
Si Si
on Customer request Article Bulb M.T.B.F Regulation
• weight 6 kg. type Mean Time
Between Failures
Compliancy S intensity
c o c o hours
c o cd
Devices in this p p SEGSPTL10
family are intended for light operation during night- LED array 100.000 p intensity type A
Low >10
a m a m a m
C l when operated under direct exposureCtolintense solar Cl
time and twilight: the expected life of the bulb may decrease SEGSPTL32 LED array 100.000 Low intensity type B >32
significantly
radiation.

Clampco Sistemi - tel. +39 0432 830240 fax +39 0432 839934 www.clampco.it clampco@clampco.it - AWLS Catalogue
Clampco Sistemi, an overview

Established in 1989, the company has earned

a remarkable growing reputation thanks to its
modern manufacturing unit and production
procedures.
The quality system is certified since 1996
in accordance with ISO 9001:2000.
Products from obstruction lights to a wide range
of radio installation accessories are the winning
mix of Clampco Sistemi’s global solutions strategy.
 Italy

www.clampco.it
clampco@clampco.it
33031 Basiliano (UD)

Fax +39.0432.839934
Tel. +39.0432.830240
S.S. Pontebbana n. 103

All legal rights in this document are the exclusive property of clampco and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.