Scribd
Upload
104 views1 page

Corrosion Control Tape Guide

This document provides information on General Purpose Corrosion Control Tape. It is a polyethylene film backed tape with a butyl rubber adhesive. It can be used for interior and exterior pipe wrapping and corrosion protection of small diameter pipe. It has excellent durability, solvent resistance, and dielectric strength. It adheres well to primed and unprimed steel surfaces and can withstand a wide range of temperatures and exposure to moisture.

Uploaded by

Gabriela Canaviri
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
104 views1 page

Corrosion Control Tape Guide

This document provides information on General Purpose Corrosion Control Tape. It is a polyethylene film backed tape with a butyl rubber adhesive. It can be used for interior and exterior pipe wrapping and corrosion protection of small diameter pipe. It has excellent durability, solvent resistance, and dielectric strength. It adheres well to primed and unprimed steel surfaces and can withstand a wide range of temperatures and exposure to moisture.

Uploaded by

Gabriela Canaviri
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

General Purpose Corrosion Control Tape

826
Backing
Backing: Polyethylene Film
Adhesive: Butyl Rubber
Adhesive Liner: N/A
Colors: Black, Yellow

Specifications: N/A

Standard Sizes: 48mm x 31M, 4" x 100Ft, 6" x 100Ft

Applications
● Interior & exterior pipe wrapping for corrosion ● Suitable for use in below-grade applications
and mechanical protection of small diameter when used in conjunction with a primer such as
pipe Polyken 1027 or 1039

Features Benefits
● Polyethylene Film Backing ● Conformable and flexible
● Excellent durability & solvent resistance
● Withstands outdoor exposure and moisture
● Butyl Rubber Adhesive ● Aggressive bond to pipe surfaces
● Resists moisture and solvents
● Excellent dielectric strength
● Good performance over a wide temperature range

Physical Properties
Standard UOM Metric UOM Test Method

Total Thickness 12 mils 304.8 mic ASTM D-1000


Adhesion to Unprimed Steel 40 oz/in 4.38 N/cm PSTC-101
Adhesion to Primed Steel 100 oz/in 10.95 N/cm PSTC-101
Tensile Strength 25 lb/in 43.78 N/cm ASTM D-1000
Application Temperature 0 -140°F -17 - 60 °C
Operating Temperature -30 - 140°F -34 - 60 °C
Elongation 110%

Recommended Storage Conditions: 40-60% Humidity, 60ºF-80ºF


Standard Shelf Life (at 25C): 24 months from date of manufacture.
The information presented herein was prepared at BERRY PLASTICS CORPORATION (25 Forge Parkway Franklin, MA 02038) by qualified technical personnel. To Berry Plastics' knowledge it is true and
accurate. However, the information and recommendations are furnished for these products with the understanding that the purchaser or user, as the case may be, will independently determine that
the product is suitable for the intended use, and that such use complies with all applicable federal, state and local laws and regulations. The data are typical values submitted only for the user's
information and consideration, and do not constitute a warranty of any kind (including but not limited to a warranty of merchantability or of fitness for a particular purpose), or a representation for
which BERRY PLASTICS assumes any legal responsibility.

Nijverheidsstraat 10
25 Forge Pkwy Franklin, MA 02038 2260 Oevel (Westerlo) Belgium
1-800-343-7875 Fax 1-800-328-4822 32-014-722500 Fax 32-014-722570
www.berryplastics.com 2/18/2011

You might also like