Scribd
Upload
33 views1 page

Cpu

This document contains a JSON configuration for mining threads on a CPU. It defines low power mode and CPU affinity for two mining threads, with one thread assigned to CPU 0 and the other to CPU 4.

Uploaded by

Le Nguyen Nhat Anh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
33 views1 page

Cpu

This document contains a JSON configuration for mining threads on a CPU. It defines low power mode and CPU affinity for two mining threads, with one thread assigned to CPU 0 and the other to CPU 4.

Uploaded by

Le Nguyen Nhat Anh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 1

// generated by xmr-stak-rx/1.0.

5-rx/6091644/xmr-stak-rx-dev/win/cpu

/*
* Thread configuration for each thread. Make sure it matches the number above.
* low_power_mode - This can either be a boolean (true or false), or a number
between 1 to 5. When set to true,
* this mode will double the cache usage, and double the single
thread performance. It will
* consume much less power (as less cores are working), but will
max out at around 80-85% of
* the maximum performance. When set to a number N greater than 1,
this mode will increase the
* cache usage and single thread performance by N times.
*
* affine_to_cpu - This can be either false (no affinity), or the CPU core number.
Note that on hyperthreading
* systems it is better to assign threads to physical cores. On
Windows this usually means selecting
* even or odd numbered cpu numbers. For Linux it will be usually
the lower CPU numbers, so for a 4
* physical core CPU you should select cpu numbers 0-3.
*
* On the first run the miner will look at your system and suggest a basic
configuration that will work,
* you can try to tweak it from there to get the best performance.
*
* A filled out configuration should look like this:
* "cpu_threads_conf" :
* [
* { "low_power_mode" : false, "affine_to_cpu" : 0 },
* { "low_power_mode" : false, "affine_to_cpu" : 1 },
* ],
* If you do not wish to mine with your CPU(s) then use:
* "cpu_threads_conf" :
* null,
*/

"cpu_threads_conf" :
[
{ "low_power_mode" : 1, "no_prefetch" : false , "affine_to_cpu" : 0 },
{ "low_power_mode" : 1, "no_prefetch" : false , "affine_to_cpu" : 4 },
],

You might also like