JOWA 3SEP
OILY WATER SEPARATOR
   OILY WATER TREATMENT SYSTEMS
             APPROVED FOR 5-PPM (DNV TAP 771.60)
  The 3SEP OWS is a dual stage oily bilge water separation system utilizing differential
  specific gravity, coalescence plates and filtration to separate and remove free and
  emulsified oil. 							
Visit us at WWW.JOWA.COM
Function
The system is designed for a continuous flow with           All equipment has the highest quality; the tanks are
automatic operation. The system does not require any        made of acid proof stainless steel, AISI 316L. Our
chemicals.                                                  pumps are supplied by internationally recognised
                                                            brands. Spare parts are easily available from one of
The first stage removes the free oil by gravity with        our offices or representatives worldwide.
the help of coalescence plates. An adjustable oil
sensor controls the valve for automatic oil release
to the sludge tank or any other dedicated tank. The         Main features
adjustable oil sensor makes it possible to minimise
                                                            »» v107(49) / DNV TAP 771.60
the amount of treatable water released to the sludge
tank.
                                                            »» Treated water below 5ppm
In the second stage emulsified oil is removed in the        »» Separates free and emulsified oil
two filter tanks and the ppm value is monitored by
a 5-ppm bilge alarm, before the treated water is            »» Continuous flow with automatic operation
discharged overboard. The collected free oil on top
of each filter tank is released automatically to the        »» Does not require any chemicals
sludge tank at a pre-set interval. When a 5-ppm alarm
occurs, the 3SEP OWS will automatically close the           »» Plug n’ play, easy installation
overboard line and re-circulate the treatable water to
the bilge. When the contamination falls below 5 ppm         »» Skid design, small footprint
the overboard valve will open again without human
intervention.                                               »» High quality material and parts
                                                            »» Tanks made of stainless steel, AISI 316L
The system is designed as a skid assembly with all
connection points collected, for easy installation.         »» Can easily be connected to JOWA EBU unit for less
When the unit reaches the customer the only                    than 5ppm applications
remaining thing to do is to connect water inlets and
outlets and the electrical power supply, facilitating       »» Capacity range 0.5-10 m3/h
quick and easy installation onboard. Before leaving
our workshop each unit has to pass a quality-test,          »» Approvals; DNV, CCS, USCG & RMRS
where all functions are tested.
 Size                Capacity (m3/h       Width (mm)     Length (mm)       Height (mm)           Weight (kg)
 3sep-0,5                  0,5                740           950                 1395                260
 3sep-1,0                   1                 875           1165                1785                260
 3sep-2,5                  2,5                1045          1495                1785                400
 3sep-5,0                   5                 1375          1775                1850                525
 3sep-10,0                 10                 1510          2095               2260                 850