HKD-100D
Instructions
Add：No.269, Meidun Road, Xiuzhou Industrial Zone,
Jiaxing,Zhejiang,China
Tel： +86-573-82798856
Fax：+86-573-82798850
P.C.：314031
E-mail:fucheng1992@163.com JIAXING FUCHENG TELECOM FACTORY
HKD-100D Public adressor /talk back system be used for small vessel
YDC- 1/3 flush type speaker SPECIICATIONS
50 226 ● MIC amplifying.
●
FM/CM Radio
Tape playing
140
●
156
210
YDC- ● Four way rated output, i.e. loud-hailing ,indoor ,outdoor and
4-M4
position(120/60V).
●
The output is provided with automatic protection so that the
equipment will not be damaged by accidental short circuit
of the output lines .
YDC- S double face speaker YDC- 1/3 wall type speaker ●
In case of AC failure ,the power supply is changed to DC 24V
140
160
source automatically.
120 ●
The main unit communication with remote control station
220
120
160
YDC- Power rating 25～50W 100W～200W
Rate output 60V 120V
120 65
The manner of installation
MODEL WEIGHT IP CLASS
YHC -1 Horn speaker RM-1G Wall type remote station HKD-100D 20Kg IP22 Desk type
Φ156 L 120
HKD-100D-Q 20Kg IP22 Flush type
65 120
0°
Technical Specification
12
Power supply voltage： 220VAC±10% 50Hz
205
220
喊话
30
舱面
岗位 24VDC± 10 %
3-Φ7 4-M4
Power comsumpution： 120W（at 50W output voltage ）
舱内
对讲
Receiving frequency: AM525～1605KHz
Tape speed: 125HZ~ 6.3kHz ≤2d B
YHC□-1 D（mm） L（mm）
MIC input: 4m V/50kΩ
5W 152 220
Frequency response of the power amplifier: 80-8000Hz
10W/15W 260 320
Tape speed:125HZ~ 6.3kHz ≤2d B
25W 320 370
MIC input: 4m V/600Ω
Public address/talk back Public address/talk back
JIAXING FUCHENG TELECOM FACTORY Sheet 4 JIAXING FUCHENG TELECOM FACTORY sheet 1
CZB-1
Method：
1.After you press "POWER"switch,"MIC"or"RADIO"will be LED on,
It indicate the power be turned on. NO.1
NO.2
2.Use MIC to speaker:Select the button to set "MIC"LED on, 1 2 3 1 2
1 2 3 4 5 1 2 1 2 NO.3
then press speaker keyswitch,and adjust the volume at middle ANT
MIC HY CM 1
1
2
1
2
E 3 3
position.last you can hold the mic of handle's"PTT"button to speak. GW 2
HK
D-□ D 3
3.Radio and tape player:Select the button to set "RADIO" LED on, 1
1 1
2 1 2 2
choice radio or tape player,then use the volume knob to appropriate DJ CL 2
3 3
satation.then press speaker keyswitch ,you must be attention to the 4 + - NO.4
~ ~
voice cann't too loud so that the voice lose original tone
DC24V AC220V
4.Talk back
Press "PTT' to talk back with the other station. ! CAUTION:ALL SPEAKER ARE RATED OUTPUT SPEAKER
Cauti on:
1.connection with far terminal is 5 line,one is 1,2(red,white)line
is "PTT"switch,3,4(yellow,yellow)line is MIC signal line,5 line is shield HKD-100D Desk type main unit
line;connection cable must use double shield cable that the calbe be 328
made of sthread twist together.interal shield cann't touch hull,thus
180
can avoid hight high frequency from input position to output position.
140
The MIC be connected outside main unit 1 4-M4
PTT 2 90
cann't connected the console termimal 2 320
3
4 MIC
2.Antena should be less than 2 meter. 5
3.Speaker must select rate output speaker ,main unit couldn't HKD-100D-Q flush type mani unit
connect rated resistance 8Ω/16Ω，otherwise it maybe make 320 175 200
amplifier damage.
200
210
226
308
T APE
M IC NO.1 NO.2 NO.3 NO.4
!
Flush type main unit shouldn't be installed horizontal of the console
that if be installed vertical plane or more than 60° incline.
Public address /talk back Public address /talk back
JIAXING FUCHENG TELECOM FACTORY Sheet 2 JIAXING FUCHENG TELECOM FACTORY Sheet 3
YDC- Q flush type speaker YDC- 1/3 wall type speaker
50 226
HKD-100D Desk type sketch map
140
156
210
220
YDC-
YDC-
4-M4
120 65
11
13 12
10
YHC50/100-1 loudspeaker
805 451
530
451
160
A
1 9
8
70
2 3 4 5 6 7 A direction
70
70
1--Loud-hailing speakers key 7--MIC volume knob ZT-1 The rotating console of horn speaker
2--Outdoor speakers key 8--MIC/RADIO TAPE selector switch
3--Machine area speakers key 9--Handle MIC
4--Indoor speakers key 10--Monitor speaker
5--Power switch 11--Radio/volume switch
6--volume knob 12--Radio and vertical knob
13--Tape player
Public address/talk back
JIAXING FUCHENG TELECOM FACTORY Sheet 5
YDC- Q flush type speaker YDC- 1/3 wall type speaker
50 226
HKD-100D Desk type sketch map
140
156
210
220
YDC-
YDC-
4-M4
120 65
11
13 12
10
YHC50/100-1 loudspeaker
805 451
530
451
160
A
1 9
8
70
2 3 4 5 6 7 A direction
70
70
1--Loud-hailing speakers key 7--MIC volume knob ZT-1 The rotating console of horn speaker
2--Outdoor speakers key 8--MIC/RADIO TAPE selector switch
3--Machine area speakers key 9--Handle MIC
4--Indoor speakers key 10--Monitor speaker
5--Power switch 11--Radio/volume switch
6--volume knob 12--Radio and vertical knob
13--Tape player
Public address/talk back
JIAXING FUCHENG TELECOM FACTORY Sheet 5
