Scribd
Upload
986 views2 pages

Installation Manual: Technology Within Your Reach

The document provides installation instructions and wiring diagrams for a request-to-exit illuminated push button. It includes diagrams showing how to connect the button electrically for normally open or closed functions. Instructions are also given on how to replace the plastic sheet covering on the button, which involves rotating a switch, removing the white plastic seat, and opening the button's cover.

Uploaded by

Jhonny Silva
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
986 views2 pages

Installation Manual: Technology Within Your Reach

The document provides installation instructions and wiring diagrams for a request-to-exit illuminated push button. It includes diagrams showing how to connect the button electrically for normally open or closed functions. Instructions are also given on how to replace the plastic sheet covering on the button, which involves rotating a switch, removing the white plastic seat, and opening the button's cover.

Uploaded by

Jhonny Silva
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Request-To-Exit Plate ref.

Illuminated Square Push VIS-7000


Technology Within Your Reach Button

INSTALLATION MANUAL

82.8mm (3.25in.)

Length (A): 114.0mm (4.46 Inch)


114

Width (B): 69.40mm (2.73 Inch)


A

Depth (C): 5.4mm (0.21 Inch)


44mm (1.73in.)

25mm
(0.98in.)

34.7mm (1.36in.)

5.4 69.40
C B

Disclaimer: VISIONIS reserve the right to go ahead with any modifications of models or features or price without forewarning. All the sales@visionistech.com
information and specifications stated in this document are current at the time of publication. Attention: We are not responsible for the
improper installation of this kit. If you are not handy with electrical equipment you should contact a professional electrician. You will also
need to check with your local Fire authority to see if you need anything else to comply with local Fire Codes. We are not responsible for www.visionistech.com
any damage or fees that can occur.
Request-To-Exit Plate ref.
Illuminated Square Push VIS-7000
Technology Within Your Reach Button

Push to Exit Button Wiring Diagram


+ : Red (1) Push-button dry contact rating: 10A/125VAC
- : Black For safe operations, do not exceed the ratings
above.
COM : Green
N.O.: White (2) For normally open requirements, connect wires
N.C. : Orange to N.O dry contact of PUSH-BUTTON

(3) For normally closed requirements, connect wire


to N.C dry contact of PUSH-BUTTON

How to Replace the Plastic Sheet


1 2
Rotary switch Remove the switch
Counterclockwise Push the white plastic
Push out the white plastic
seat

3 4
Open the cover with Replace the plastic sheet
a screwdriver

Disclaimer: VISIONIS reserve the right to go ahead with any modifications of models or features or price without forewarning. All the sales@visionistech.com
information and specifications stated in this document are current at the time of publication. Attention: We are not responsible for the
improper installation of this kit. If you are not handy with electrical equipment you should contact a professional electrician. You will also
need to check with your local Fire authority to see if you need anything else to comply with local Fire Codes. We are not responsible for www.visionistech.com
any damage or fees that can occur.

You might also like