NANCAR1032 Product Data Sheet
Issue No: NBR007/Date of issue: Oct. 01,2019 / Previous issue from Aug. 2009
POLYMER DESCRIPTION：
NANCAR® 1032 is a medium high acrylonitrile butadiene copolymer with good oil
resistance. It is polymerized at low temperature and contains sufficient
antioxidant for normal aging conditions. It is highly water resistant, and
non-corrosive to metal.
APPLICATION：
NANCAR® 1032 is an excellent multi-purpose nitrile rubber. It is particularly
recommended for use in oil resistant rubber parts with low metal corrosion and
high water resistance.
POLYMER PROPERTIES:
property Typical Value Specification test method
Acrylonitrile content 33 32~34 Internal test method, NANTEX Inc.
Mooney Viscosity, ML1+4 @100℃ ASTM D-1646
63 55~70
(massed)
Heat loss, % 0.4 0.5 max. ASTM D-5688
Specific gravity 1.00 --- Internal test method, NANTEX Inc.
Total Ash 0.65 1.0 max ASTM D-1416
COMPOUND PROPERTIES:
1. Test formulation： ASTM D-3187/ISO 4658 /Miniature internal mixer(based on IRB#8)
Ingredients Parts (phr)
NANCAR® 1032 100.00
NBS zinc oxide 3.00
2% MgCO3 coated 1.50
NBS stearic acid 1.00
HAF Black IRB#8 40.00
TBBS, NBS 384 0.70
合計 146.20
NANCAR is the registered trade mark of nitrile rubber manufactured by NANTEX INDUSTRY CO., LTD.
1
NANCAR1032 Product Data Sheet
Issue No: NBR007/Date of issue: Oct. 01,2019 / Previous issue from Aug. 2009
2. Rheometer properties:
ODR-2000 160℃,micro-dies,±1.0 degree arc,30 min. running time, no preheat
property Typical Value Specification test mothed
Minimum torque ML, lb-in 0.87 0.60~1.14
Maximum torque MH, lb-in 3.78 3.05~4.52 ISO 6502/ASTM D-5289
Scorch time ts1, min. 3.5 2.7~4.3
Optimum cure tc90, min. 16.6 3.8~19.4
Packaging: 25kg bales on pallets of 1200kg.
Shelf life : 12 months from date of production at temperatures not
exceeding 35℃ in dry conditions; exposure to light has to be
avoided.
Product Safety: Relevant safety data and references as well as the
possibly necessary warming labels are to be found in the safety data
sheet.
These raw material properties are typical and, unless specifically
indicated otherwise, are not to be considered as delivery specification.
This information and our technical advice-whether verbal, in writing or by way of trials-are given in
good faith but without warranty, and this also applies where proprietary rights of third parties are
involved. Our advice does not release you from the obligation to check its validity and to test our
products as to their suitability for the intended processes and uses. The application, use and
processing of our products and the products manufactured by you on the basis of our technical
advice are beyond our control and, therefore, entirely tour own responsibility. Our products are sold in
accordance with the current version of our General Conditions of Sales and Delivery.
TEL : 886-7-6413621 ext. 216,249
FAX : 886-7-6464875
