437
GRADE LEVEL: Grade 7/8
SUBJECT: PLUMBING
NOMINAL HOURS: 40 HOURS
COMPONENT: INDUSTRIAL ARTS
QUARTER CONTENT STANDARDS PERFORMANCE STANDARDS MOST ESSENTIAL LEARNING DURATION K-12 CG Code
COMPETENCIES
The learner demonstrates The learner independently LO 1. Prepare plumbing materials and 1 WEEK TLE_IAPB7/8UT-
an understanding of prepares appropriate plumbing tools for the task 0a-1
concepts in the materials and tools using the 1.1 Prepare a list of plumbing tools and
preparation of plumbing different forms in electrical materials for a specific job
materials and tools using installation and maintenance
the different forms in based on industry standards.
electrical installation and
maintenance.
LO 2. Request appropriate plumbing TLE_IAPB7/8UT-
supplies, materials and tools applicable 0a-2
to a specific job
1.1 Use the appropriate form in
requesting for plumbing tools,
supplies and materials for a specific
job 1 WEEK
The learner demonstrates The learner independently LO 1. Select plumbing measuring tools TLE_IAPB7/8MC-
an understanding of the performs accurate measurements and instruments 0c-1
concepts and underlying and calculation based on given
principles in performing tasks. 1.1 Choose measuring tools to be used
measurements and for specific tasks
calculations.
LO 2. Carry out measurements and 2 WEEKS TLE_IAPB7/8MC-
calculations 0d-2
2.1 Use appropriate measuring devices
for specific tasks
438
The learner demonstrates The learner independently reads LO 1. Analyze signs, plumbing symbols TLE_IAPB7/8ID-
an understanding of the and interprets specifications of and data 0e-1
concepts and underlying simple technical drawings and 1.1 Read and interpret plumbing signs,
principles in interpreting plans. symbols and data
simple technical drawings 1.2 Analyze plumbing components and
and plans in plumbing materials based on electrical signs,
installation and symbols and data
maintenance.
LO 2. Interpret technical drawings and TLE_IAPB7/8ID-
plans 0f-2
1.1 Read blueprints of plumbing plans,
diagrams and circuits
1.2 Identify necessary tools, materials
and equipment according to
blueprints of plumbing plans,
diagrams and circuits
1 WEEK
The learner demonstrates The learner independently LO 2. Perform basic preventive TLE_IAPB7/8MT-
an understanding of the performs proper maintenance of maintenance 0g-2
concepts and underlying plumbing tools and equipment 1.1 Maintenance of tools is done
principles in the based on industry standards. regularly
maintenance of plumbing
tools and equipment.
LO 3. Store tools and equipment TLE_IAPB7/8MT-
1.1 Tools are stored safely in appropriate 0h-3
locations in accordance with
439
manufacturer specifications or
standard operating procedure
1 WEEK
The learner demonstrates The learner independently LO 1. Identify hazards and risks TLE_IAPB7/8OS-
an understanding of the identifies hazards correctly in 1.1 Observing safety work habits in the 0i-1
concepts and underlying accordance with occupational work place
principles in occupational health and safety procedures. 1.2 Preventing hazards in the workplace
health and safety
procedures
LO 2. Evaluate hazards and risks TLE_IAPB7/8OS-
2.1 Identify work hazards in the 0i-2
workplace
GRADE LEVEL: Grade 7/8
SUBJECT: AUTOMOTIVE I / MOTORCYCLE SMALL ENGINE
NOMINAL HOURS: 40 HOURS
COMPONENT: INDUSTRIAL ARTS
QUARTER CONTENT STANDARDS PERFORMANCE STANDARDS MOST ESSENTIAL LEARNING DURATION K-12 CG Code
COMPETENCIES
1 WEEK
The learners demonstrate The learners shall be able to LO 1. Select Measuring Instrument
an understanding of perform mensuration and 1.1 Identify object or component to be
concepts and underlying calculation based on job measured
theories and principles in requirements 1.2 Obtain correct specifications from
performing measurements relevant source
and calculations 1.3 Select appropriate measuring
instrument as per job requirement
1 WEEK
LO 2. Carry out measurement and
calculation
